School of Mechanical and Electrical Engineering
Latest research outputs
626 results found
Sort by Date Title
Investigation of slow release of urea from biodegradable single- and double-layered hollow nanofibre yarns
Javazmi, Leila, Low, Tobias, Ash, Gavin and Young, Anthony. 2020. "Investigation of slow release of urea from biodegradable single- and double-layered hollow nanofibre yarns." Scientific Reports. 10 (1). https://doi.org/10.1038/s41598-020-76395-6Article
Investigation of particulate suspensions in generalised hydrodynamic dissipative particle dynamics using a spring model
Mai-Duy, N., Nguyen, T. Y. N., Le-Cao, K. and Phan-Thien, N.. 2020. "Investigation of particulate suspensions in generalised hydrodynamic dissipative particle dynamics using a spring model." Applied Mathematical Modelling: simulation and computation for engineering and environmental systems. 77 (1), pp. 652-662. https://doi.org/10.1016/j.apm.2019.07.065Article
Studying the effects of using two types of Afos on the ankle and knee joints kinematics and kinetics during walking in the sagittal plane for a patient with severe DDH; Part 2
Alrikabi, Redha, Chong, Albert and Sharifian, Ahmad. 2020. "Studying the effects of using two types of Afos on the ankle and knee joints kinematics and kinetics during walking in the sagittal plane for a patient with severe DDH; Part 2." International Journal of Materials, Mechanics and Manufacturing. 8 (3), pp. 148-154. https://doi.org/10.18178/ijmmm.2020.8.3.498Article
Studying the effects of using two types of Afos on the hip joint kinematics and kinetics during walking in the sagittal plane for a patient with severe DDH; Part 1
Alrikabi, Redha, Chong, Albert and Sharifian, Ahmad. 2020. "Studying the effects of using two types of Afos on the hip joint kinematics and kinetics during walking in the sagittal plane for a patient with severe DDH; Part 1." International Journal of Materials, Mechanics and Manufacturing. 8 (2), pp. 40-45. https://doi.org/10.18178/ijmmm.2020.8.2.481Article
The effect of biochar addition on plant major nutrient uptake in hydroponic systems
Haraz, Mohammed Taha. 2020. The effect of biochar addition on plant major nutrient uptake in hydroponic systems. PhD Thesis Doctor of Philosophy. University of Southern Queensland.PhD Thesis
CFD Assessment and Experimental Investigation of the Liquid Separation Efficiency Enhancements in a Vertical Gravity Separator
Mahmood, Raid Ahmed. 2020. "CFD Assessment and Experimental Investigation of the Liquid Separation Efficiency Enhancements in a Vertical Gravity Separator." International Journal of Air-Conditioning and Refrigeration. 28 (3), pp. 2050021-1. https://doi.org/10.1142/S2010132520500212Article
Mechatronics and Machine Vision in Practice 3
Billingsley, John and Brett, Peter (ed.) 2018. Mechatronics and Machine Vision in Practice 3. Switzerland. Springer.Edited book
Robotics and automation for improving agriculture
Billingsley, John (ed.) 2019. Robotics and automation for improving agriculture. Cambridge, United Kingdom. Burleigh Dodds Science Publishing Limited.Edited book
Essentials of Dynamics and Vibrations
Billingsley, John. 2018. Essentials of Dynamics and Vibrations. Switzerland. Springer.Textbook
The use of BA mixture in diesel engines: blend preparation, spray visualisation and engine performance
Algayyim, Sattar Jabbar Murad. 2019. The use of BA mixture in diesel engines: blend preparation, spray visualisation and engine performance. PhD Thesis Doctor of Philosophy. University of Southern Queensland. https://doi.org/10.26192/z223-t963PhD Thesis
Performance enhancement of solar still desalination systems using revolving tubes: CFD simulation and experimental investigation
Alkaisi, Ahmed Kasim Taha. 2019. Performance enhancement of solar still desalination systems using revolving tubes: CFD simulation and experimental investigation. PhD Thesis Doctor of Philosophy. University of Southern Queensland. https://doi.org/10.26192/9t9q-nw67PhD Thesis
Design of variable geometry radial ejector for HVAC purposes through experiments and simulation
Al-Rbaihat, Raed Hussein. 2020. Design of variable geometry radial ejector for HVAC purposes through experiments and simulation. PhD Thesis Doctor of Philosophy. University of Southern Queensland. https://doi.org/10.26192/y9hc-3r88PhD Thesis
Fabrication and characterization of multi-layered nanofibre structures for potential applications in agriculture
Javazmi, Leila. 2019. Fabrication and characterization of multi-layered nanofibre structures for potential applications in agriculture. PhD Thesis Doctor of Philosophy. University of Southern Queensland. https://doi.org/10.26192/9z6w-0038PhD Thesis
In-tyre strain sensing of small non-pressurised tyres for mobile robotic applications
Lutfi, Ali Farooq Lutfi. 2019. In-tyre strain sensing of small non-pressurised tyres for mobile robotic applications. PhD Thesis Doctor of Philosophy. University of Southern Queensland. https://doi.org/10.26192/bjk2-5t81PhD Thesis
Optical and thermal optimisation of parabolic trough solar collectors for heating applications via a novel receiver tube
Al-Ogaili, Khaleel Saleem Jebur. 2019. Optical and thermal optimisation of parabolic trough solar collectors for heating applications via a novel receiver tube. PhD Thesis Doctor of Philosophy. University of Southern Queensland.PhD Thesis
Shear strength properties of artificial rock joints
Zohaib, Muhammad, Mirzaghorbanali, Ali, Helwig, Andreas, Aziz, Naj, Gregor, Peter, Rastegarmanesh, Ashkan and McDougall, Kevin. 2020. "Shear strength properties of artificial rock joints." Aziz, Naj and Kininmonth, Bob (ed.) 2020 Coal Operators' Conference. Wollongong, Australia 18 - 20 Feb 2019 Wollongong, Australia.Paper
Effect of various urea concentrations on nitrogen slow release from PLLA nanofiber mat
Javazmi, Leila, Low, Tobias, Young, Anthony and Ash, Gavin. 2020. "Effect of various urea concentrations on nitrogen slow release from PLLA nanofiber mat." 8th International Conference on Nanoscience and Nanotechnology (ICONN 2020). Brisbane, Australia 09 - 13 Feb 2020 Brisbane, Australia.Presentation
Simulation of several CNT based macrostructures using slip-link model and discrete element method
Tran, Canh-Dung and Ho-Minh, Dao. 2020. "Simulation of several CNT based macrostructures using slip-link model and discrete element method." 8th International Conference on Nanoscience and Nanotechnology (ICONN 2020). Brisbane, Australia 09 - 13 Feb 2020 Brisbane, Australia.Poster
Flexible and wearable flow sensor using spinnable carbon nanotube nanofilm for respiration monitoring
Dinh, Toan, Nguyen, Thanh, Dau, Van Thanh, Riduan, Foisal Abu, Tran, Canh-Dung, Phan, Hoang-Phuong, Nguyen, Tuan-Khoa, Guzman, Pablo, Nguyen, Nam-Trung and Dao, Dzung Viet. 2020. "Flexible and wearable flow sensor using spinnable carbon nanotube nanofilm for respiration monitoring." 33rd IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2020). Vancouver, Canada 18 - 22 Jan 2020 Canada. https://doi.org/10.1109/MEMS46641.2020.9056423Paper
Potential Application of Wire Woven Mesh as Tower Packing Support-Computational Approach
Ebrahiminejad, Vahid and Sharifian Barforoush, Ahmad. 2020. "Potential Application of Wire Woven Mesh as Tower Packing Support-Computational Approach." 22nd International Conference on Composite Materials (ICCM-22). Melbourne, Australia 11 - 16 Aug 2019 Australia.Paper
Investigation study of the inlet to body diameter ratio of a vertical flash tank separator using computational fluid dynamic (CFD)
Mahmood, Raid Ahmed. 2019. "Investigation study of the inlet to body diameter ratio of a vertical flash tank separator using computational fluid dynamic (CFD)." GSRD International Conference on Science, Engineering and Technology (ICSET 2019). Amman, Jordan 20 Feb 2019 Amman, Jordan.Paper
Development of thermoplastic 3D printing feedstock utilising biomass
Xiao, Xianglian. 2020. Development of thermoplastic 3D printing feedstock utilising biomass. PhD Thesis Doctor of Philosophy. University of Southern Queensland. https://doi.org/10.26192/27a0-j736PhD Thesis
CFD Instraction Guide to Simulate Two-Phase Flow Separation in a Vertical T-junction Separator
Mahmood, Raid Ahmed. 2019. "CFD Instraction Guide to Simulate Two-Phase Flow Separation in a Vertical T-junction Separator." International Institute of Engineers & Researchers 576th International Conference on Recent Innovations in Engineering and Technology (ICRIET-2019). Istanbul, Turkey 06 - 07 Feb 2019 Khandagiri, India.Paper
Effect of inlet manifold water injection on diesel engine performance and emissions
Kafle, Sujit, Wandel, Andrew P. and Al-Lwayzy, Saddam. 2019. "Effect of inlet manifold water injection on diesel engine performance and emissions." Medwell, Paul, Alwahabi, Zeyad, Evans, Michael, Chan, Shaun, Chinnici, Alfonso, Tian, Zhao and Dally, Bassam (ed.) 2019 Australian Combustion Symposium. Adelaide, Australia 04 - 06 Dec 2019 Sydney, Australia.Paper
A Physical Understanding of how Multiple Mapping Conditioning Works
Wandel, Andrew P.. 2019. "A Physical Understanding of how Multiple Mapping Conditioning Works." Medwell, Paul, Alwahabi, Zeyad, Evans, Michael, Chan, Shaun, Chinnici, Alfonso, Tian, Zhao and Dally, Bassam (ed.) 2019 Australian Combustion Symposium. Adelaide, Australia 04 - 06 Dec 2019 Sydney, Australia.Paper
Real-Time 3D Mapping of Biopsy Fiducial Points using Two Infrared Cameras
Shar, Bruce and Leis, John. 2018. "Real-Time 3D Mapping of Biopsy Fiducial Points using Two Infrared Cameras." Billingsley, John and Brett, Peter (ed.) Mechatronics and Machine Vision in Practice 3. Switzerland. Springer. pp. 109-116Edited book (chapter)
Recent Progress in Shape Memory Polymers in Biomedical Applications
Jeewantha, Lama Hewage Janitha, Islam, Md Mainul and Epaarachchi, Jayantha Amanda. 2019. "Recent Progress in Shape Memory Polymers in Biomedical Applications." Yang, Richard, Zhang, Leo, Zhao, Ming, Fang, Gu and Islam, Rafiqul (ed.) 1st International Conference on Mechanical and Manufacturing Engineering Research and Practice (iCMMERP-2019). Sydney, Australia 24 - 28 Nov 2019 Sydney, Australia.Paper
Tribological investigation of frictional behaviour of mild steel under canola bio-lubricant conditions
Shalwan, A., Yousif, B. F., Alajmi, F. H., Alrashdana, K. R. and Alajmi, M.. 2020. "Tribological investigation of frictional behaviour of mild steel under canola bio-lubricant conditions." Tribology in Industry. 42 (3), pp. 481-493. https://doi.org/10.24874/ti.895.05.20.09Article
Developing Feedback to Control an Intelligent Battery Charger for Wet Batteries
Helwig, Sahay and Sahay, Akshay. 2018. "Developing Feedback to Control an Intelligent Battery Charger for Wet Batteries." 2018 Australasian Universities Power Engineering Conference (AUPEC 2018). Auckland, New Zealand 27 - 30 Nov 2018 Piscataway, United States. https://doi.org/10.1109/AUPEC.2018.8757891Paper
Nano-structured GaAs Solar Cell Design, Simulation and Analysis for Conversion Efficiency Improvement
Tan, Shiyao, Das, Narottam, Helwig, Andreas and Islam, Syed. 2018. "Nano-structured GaAs Solar Cell Design, Simulation and Analysis for Conversion Efficiency Improvement." 2018 Australasian Universities Power Engineering Conference (AUPEC 2018). Auckland, New Zealand 27 - 30 Nov 2018 Piscataway, United States. https://doi.org/10.1109/AUPEC.2018.8757873Paper
Ethylene Detection using Laser Modulated Photoacoustic Resonance at 1625nm
Leis, John and Buttsworth, David. 2019. "Ethylene Detection using Laser Modulated Photoacoustic Resonance at 1625nm." Alwahabi, Z.T. and Medwell, P.R. (ed.) 9th Australian Conference on Laser Diagnostics (IX ACLD). Adelaide, Australia 02 - 04 Dec 2019 Adelaide, Australia.Paper
Food excess and by-product processing ‘ecosystem’ mode
Burey, Paulomi, Panchal, Sunil and Helwig, Andreas. 2019. "Food excess and by-product processing ‘ecosystem’ mode." 13th International Congress on Engineering and Food (ICEF13). Melbourne, Australia 23 - 26 Sep 2019Paper
Better Service from Understanding the Social Network Behaviour in the Internet
Albdair, Mostfa, Addie, Ronald G. and Kist, Alexander. 2019. "Better Service from Understanding the Social Network Behaviour in the Internet." 2018 IEEE Region 10 Conference (TENCON 2018). Jeju, South Korea 28 - 31 Oct 2018 Piscataway, United States. https://doi.org/10.1109/TENCON.2018.8650301Paper
The effect of abrasive pretreatment on the drying kinetics and phenolic compounds in goji berries (Lycium barbarum L.)
Russo, Paola, Adiletta, Giuseppina, Di Matteo, Marisa, Senadeera, Wijitha and Cinquanta, Luciano. 2020. "The effect of abrasive pretreatment on the drying kinetics and phenolic compounds in goji berries (Lycium barbarum L.)." Journal of Food Processing and Preservation. 44 (12). https://doi.org/10.1111/jfpp.14933Article
A new structure of Tesla coupled nozzle in synthetic jet micro-pump
Tran, Canh-Dung, Pham, Phuc Hong, Nguyen, Tuan-Khoa, Phan, Hoang-Phuong, Dinh, Toan, Nguyen, Thanh Viet, Bui, Thanh Tung, Duc, Trinh Chu, Nguyen, Nam-Trung, Dao, Dzung Viet and Dau, Van Thanh. 2020. "A new structure of Tesla coupled nozzle in synthetic jet micro-pump." Sensors and Actuators A: Physical. 315, pp. 1-7. https://doi.org/10.1016/j.sna.2020.112296Article
Introducing an innovation promotion model for construction projects
Fernando, Sam, Panuwatwanich, Kriengsak and Thorpe, David. 2021. "Introducing an innovation promotion model for construction projects." Engineering, Construction and Architectural Management. 28 (3), pp. 728-746. https://doi.org/10.1108/ECAM-03-2020-0145Article
An electrohydrodynamic gyroscope
Van, Ngoc Tran, Dau, Van Thanh, Tran, Canh-Dung, Dinh, Thien Xuan, Phan-Thanh, Hoa, Duc, Trinh Chu and Bui, Tung Thanh. 2020. "An electrohydrodynamic gyroscope." Sensors and Actuators A: Physical. 315. https://doi.org/10.1016/j.sna.2020.112291Article
Light activated shape memory polymers and composites: A review
Herath, Madhubhashitha, Epaarachchi, Jayantha, Islam, Mainul, Fang, Liang and Leng, Jinsong. 2020. "Light activated shape memory polymers and composites: A review." European Polymer Journal. 136, pp. 1-27. https://doi.org/10.1016/j.eurpolymj.2020.109912Article
Effects of Different Relative Humidities on Flax Fibers prior to Manufacturing Their Composites Based on the Shear Response
Moudood, Abdul, Rahman, Anisur, Ochsner, Andreas, Islam, Md Mainul, Ali, Mohammad Yeakub and Francucci, Gaston. 2020. "Effects of Different Relative Humidities on Flax Fibers prior to Manufacturing Their Composites Based on the Shear Response." Advances in Materials Science and Engineering. 2020, pp. 1-7. https://doi.org/10.1155/2020/4785970Article
Wide Area Wireless Networks for IoT Applications
Brown, Jason. 2019. "Wide Area Wireless Networks for IoT Applications." Khan, Jamil Y. and Yuce, Mehmet R. (ed.) Internet of Things (IoT): Systems and Applications. Singapore. Jenny Stanford Publishing. pp. 203-228Edited book (chapter)
0
total views0
total downloads0
views this month0
downloads this month