400907. Industrial electronics


Title400907. Industrial electronics
Parent4009. Electronics, sensors and digital hardware

Latest research outputs

Sort by Date Title
Microwave technique for liquid water detection in icing applications
Leis, John, Buttsworth, David, Saeed, Ramiz, Saleh, Khalid, McGilvray, Matthew and Gillespie, David. 2019. "Microwave technique for liquid water detection in icing applications." 2019 International Conference on Icing of Aircraft, Engines, and Structures. Minneapolis, United States 17 - 21 Jun 2019 United States. https://doi.org/10.4271/2019-01-1930

Paper

A new wind tunnel facility for ice crystal icing experiments
Saeed, Ramiz, Buttsworth, David and Saleh, Khalid. 2019. "A new wind tunnel facility for ice crystal icing experiments." 2019 International Conference on Icing of Aircraft, Engines, and Structures. Minneapolis, United States 17 - 21 Jun 2019 United States. https://doi.org/10.4271/2019-01-1926

Paper

Power effect of ultrasonically vibrated spacers in air gap membrane distillation: Theoretical and experimental investigations
Al-Juboori, Raed A., Naji, Osamah, Bowtell, Les, Alpatova, Alla, Soukane, Sofiane and Ghaffour, Norreddine. 2021. "Power effect of ultrasonically vibrated spacers in air gap membrane distillation: Theoretical and experimental investigations." Separation and Purification Technology. 262, pp. 1-12. https://doi.org/10.1016/j.seppur.2021.118319

Article

Developing Feedback to Control an Intelligent Battery Charger for Wet Batteries
Helwig, Sahay and Sahay, Akshay. 2018. "Developing Feedback to Control an Intelligent Battery Charger for Wet Batteries." 2018 Australasian Universities Power Engineering Conference (AUPEC 2018). Auckland, New Zealand 27 - 30 Nov 2018 Piscataway, United States. https://doi.org/10.1109/AUPEC.2018.8757891

Paper

New wind tunnel facility for icing experiments on models of turbofan compressor surfaces
Saeed, Ramiz Ibraheem. 2019. New wind tunnel facility for icing experiments on models of turbofan compressor surfaces. PhD Thesis Doctor of Philosophy. University of Southern Queensland. https://doi.org/10.26192/PYRQ-7A50

PhD Thesis

Determining the Convergence of Synchronous Measurements for Embedded Industrial Applications
Leis, John and Buttsworth, David. 2017. "Determining the Convergence of Synchronous Measurements for Embedded Industrial Applications." IEEE Transactions on Industrial Electronics. 64 (9), pp. 7392-7398. https://doi.org/10.1109/TIE.2016.2638798

Article

Distributed static compensator (DSTATCOM) for voltage support in single wire earth return (SWER) networks
Mirazimiabarghouei, Seyed Javad. 2017. Distributed static compensator (DSTATCOM) for voltage support in single wire earth return (SWER) networks. PhD Thesis Doctor of Philosophy. University of Southern Queensland. https://doi.org/10.26192/5c05c844d30ca

PhD Thesis

A Robust Method for Tuning Photoacoustic Gas Detectors
Leis, John and Buttsworth, David. 2018. "A Robust Method for Tuning Photoacoustic Gas Detectors." IEEE Transactions on Industrial Electronics. 65 (5), pp. 4338-4346. https://doi.org/10.1109/TIE.2017.2762636

Article

A temperature compensation technique for near-infrared methane gas threshold detection
Leis, John and Buttsworth, David. 2016. "A temperature compensation technique for near-infrared methane gas threshold detection." IEEE Transactions on Industrial Electronics. 63 (3), pp. 1813-1821. https://doi.org/10.1109/TIE.2015.2495292

Article

Single Wire Earth Return (SWER) system voltage support using four quadrant DSTATCOM
Mirazimiabarghouei, Seyed Javad, Ahfock, Tony and Helwig, Andreas. 2016. "Single Wire Earth Return (SWER) system voltage support using four quadrant DSTATCOM." 6th IEEE International Conference on Power and Energy (PECon 2016): Empowering Technologies for Future Energy Sustainability. Melaka, Malaysia 28 - 29 Nov 2016 Malaysia. https://doi.org/10.1109/PECON.2016.7951564

Paper

Placement of Distribution STATic COMpensator (DSTATCOM) as voltage support equipment in Single Wire Earth Return (SWER) system
Mirazimiabarghouei, Seyed Javad, Ahfock, Tony and Helwig, Andreas. 2016. "Placement of Distribution STATic COMpensator (DSTATCOM) as voltage support equipment in Single Wire Earth Return (SWER) system." 6th IEEE International Conference on Power and Energy (PECon 2016): Empowering Technologies for Future Energy Sustainability. Melaka, Malaysia 28 - 29 Nov 2016 https://doi.org/10.1109/PECON.2016.7951468

Paper

Simultaneous gain, drift and offset estimation in measurement systems using coherent sampling
Leis, John. 2013. "Simultaneous gain, drift and offset estimation in measurement systems using coherent sampling." Wysocki, Tadeusz A. and Wysocki, Beata J. (ed.) 2013 7th International Conference on Signal Processing and Communication Systems (ICSPCS 2013). Gold Coast, Australia 16 - 18 Dec 2013 United States. https://doi.org/10.1109/ICSPCS.2013.6723972

Paper

Convergence in synchronous measurements
Leis, John and Buttsworth, David. 2015. "Convergence in synchronous measurements." Wysocki, Beata J. and Wysocki, Tadeusz A. (ed.) 2014 8th International Conference on Signal Processing and Communication Systems (ICSPCS 2014). Gold Coast, Australia 15 - 17 Dec 2014 United States. https://doi.org/10.1109/ICSPCS.2014.7021090

Paper

Detection of potentially explosive methane levels using a solid-state infrared source
Leis, John, Buttsworth, David, Snook, Chris and Holmes, Graham. 2014. "Detection of potentially explosive methane levels using a solid-state infrared source." IEEE Transactions on Instrumentation and Measurement. 63 (12), pp. 3088-3095. https://doi.org/10.1109/TIM.2014.2327457

Article

Processing of materials using electromagnetic fields
Ku, Harry S.. 2012. "Processing of materials using electromagnetic fields." Nicolais, Luigi and Borzacchiello, Assunta (ed.) Wiley encyclopedia of composites, 2nd ed.. Hoboken, NJ. United States. John Wiley & Sons. pp. 2487-2500

Edited book (chapter)

Dielectric properties of sawdust reinforced epoxy composites post-cured in microwaves
Ku, H., Trada, M. and Tai, P.. 2013. "Dielectric properties of sawdust reinforced epoxy composites post-cured in microwaves ." Journal of Reinforced Plastics and Composites. 32 (10), pp. 765-774. https://doi.org/10.1177/0731684412475250

Article

Sampling, quantization and computational aspects of the quadrature lock-in amplifier
Leis, John, Kelly, Christopher and Buttsworth, David. 2012. "Sampling, quantization and computational aspects of the quadrature lock-in amplifier." Wysocki, Beata J. and Wysocki, Tadeusz (ed.) 2012 6th International Conference on Signal Processing and Communication Systems (ICSPCS 2012). Gold Coast, Australia 12 - 14 Dec 2012 United States. IEEE (Institute of Electrical and Electronics Engineers). https://doi.org/10.1109/ICSPCS.2012.6507974

Paper

Simplified digital lock-in amplifier algorithm
Leis, J., Martin, P. and Buttsworth, D.. 2012. "Simplified digital lock-in amplifier algorithm." Electronics Letters. 48 (5), pp. 259-261. https://doi.org/10.1049/el.2012.0193

Article

Electrochemical performance of a graphene polypyrrole nanocomposite as a supercapacitor electrode
Bose, Saswata, Kim, Nam Hoon, Kuila, Tapas, Lau, Kin-tak and Lee, Joong Hee. 2011. "Electrochemical performance of a graphene polypyrrole nanocomposite as a supercapacitor electrode ." Nanotechnology. 22 (29), p. 5202. https://doi.org/10.1088/0957-4484/22/29/295202

Article

Sensorless commutation of printed circuit brushless direct current motors
Ahfock, A. and Gambetta, D.. 2010. "Sensorless commutation of printed circuit brushless direct current motors ." IET Electric Power Applications. 4 (6), pp. 397-406. https://doi.org/10.1049/iet-epa.2009.0133

Article

In-situ synthesis and characterization of electrically conductive polypyrrole/graphene nanocomposites
Bose, Saswata, Kuila, Tapas, Uddin, Md. Elias, Kim, Nam Hoon, Lau, Alan K. T. and Lee, Joong Hee. 2010. "In-situ synthesis and characterization of electrically conductive polypyrrole/graphene nanocomposites." Polymer. 51 (25), pp. 5921-5928. https://doi.org/10.1016/j.polymer.2010.10.014

Article

Estimating gas concentration using a microcantilever-based electronic nose
Leis, John, Zhao, Weichang, Pinnaduwage, Lal A., Gehl, Anthony C., Allman, Steve L., Shepp, Allan and Mahmud, Ken K.. 2010. "Estimating gas concentration using a microcantilever-based electronic nose." Digital Signal Processing. 20 (4), pp. 1229-1237. https://doi.org/10.1016/j.dsp.2009.10.026

Article

An inexpensive stereo-image capture tool for motion study
Chong, Albert K.-F.. 2007. "An inexpensive stereo-image capture tool for motion study." The Photogrammetric Record. 22 (119), pp. 226-237. https://doi.org/10.1111/j.1477-9730.2007.00439.x

Article

A new sensorless commutation technique for brushless DC motors
Gambetta, D. and Ahfock, A.. 2009. "A new sensorless commutation technique for brushless DC motors." IET Electric Power Applications. 3 (1), pp. 40-49. https://doi.org/10.1049/iet-epa:20070517

Article

Impact of solar cell efficiency on the design of photovoltaic systems
Kamel, Fouad M. and Muhlbauer, A.. 1984. "Impact of solar cell efficiency on the design of photovoltaic systems." Solar Cells. 11 (3), pp. 269-280. https://doi.org/10.1016/0379-6787(84)90016-4

Article

Mode-matching analysis of a shielded rectangular dielectric-rod waveguide
Wells, Colin G. and Ball, James A. R.. 2005. "Mode-matching analysis of a shielded rectangular dielectric-rod waveguide." IEEE Transactions on Microwave Theory and Techniques. 53 (10), pp. 3169-3177. https://doi.org/10.1109/TMTT.2005.855148

Article