401706. Numerical modelling and mechanical characterisation
| Title | 401706. Numerical modelling and mechanical characterisation |
|---|---|
| Parent | 4017. Mechanical engineering |
Latest research outputs
Sort by Date Title
Modelling of multi-panel transmission tower retrofitted with leg reinforcement
Zhuge, Y. and Mills, J.. 2011. "Modelling of multi-panel transmission tower retrofitted with leg reinforcement." Fragomeni, Sam, Venkatesan, Srikanth, Lam, Nelson T. K. and Setunge, Sujeeva (ed.) 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM 21). Melbourne, Australia 07 - 10 Dec 2010 Leiden, Netherlands. https://doi.org/10.1201/b10571-122Paper
Optimization of the air gap spacing in a solar water heater with double glass cover
AL-Khaffajy, M. and Mossad, R.. 2011. "Optimization of the air gap spacing in a solar water heater with double glass cover." Soria, Julio (ed.) 9th Australasian Heat and Mass Transfer Conference. Melbourne, Australia 02 - 04 Nov 2011 Melbourne, Australia .Paper
A study on the failure mechanisms of horizontal plate anchors in clay
Shiau, Jim and Al Abri, Mohammed. 2011. "A study on the failure mechanisms of horizontal plate anchors in clay." Shahin, M. and Nikraz, H. (ed.) ICAGE 2011: International Conference on Advances in Geotechnical Engineering. Perth, Australia 07 - 09 Nov 2011 Perth, Australia.Paper
Modeling uplift of plate anchor
Shiau, J. S. and Hobson, M. A.. 2011. "Modeling uplift of plate anchor." Sainsbury, David, Hart, Roger, Detournay, Christine and Nelson, Michele (ed.) Continuum and Distinct Element Numerical Modeling in Geomechanics (2011). Melbourne, Australia 14 - 16 Feb 2011 Minneapolis, MN. USA.Paper
Calculation of lateral earth pressures with layered backfill
Shiau, J. S. and Smith, C. A.. 2011. "Calculation of lateral earth pressures with layered backfill." Sainsbury, David, Hart, Roger, Detournay, Christine and Nelson, Michele (ed.) Continuum and Distinct Element Numerical Modeling in Geomechanics (2011). Melbourne, Australia 14 - 16 Feb 2011 Minneapolis, MN, USA.Paper
Relationship between different mechanical properties of phenol formaldehyde SLG-reinforced composites
Ku, H. S.. 2011. "Relationship between different mechanical properties of phenol formaldehyde SLG-reinforced composites." Journal of Reinforced Plastics and Composites. 30 (15), pp. 1281-1292. https://doi.org/10.1177/0731684411418705Article
Numerical simulation of rolling process and microstructure evolution of AM50 Mg alloy during hot rolling process
Hua, Fuan, Zhang, Chaoyi, Li, Qiang, Yu, Baoyi, Liu, Weihua, Li, Runxia, Xie, Shuisheng, Huang, Guojie, Cheng, Lei, Fu, Yao and Wang, Hao. 2011. "Numerical simulation of rolling process and microstructure evolution of AM50 Mg alloy during hot rolling process ." Advanced Materials Research. 291-294, pp. 449-454. https://doi.org/10.4028/www.scientific.net/AMR.291-294.449Article
Relationship between electrical and mechanical loss tangents of hollow glass powder reinforced epoxy composites: a pilot study
Ku, H., Maxwell, A., Wong, P., Huang, J. and Fung, H.. 2011. "Relationship between electrical and mechanical loss tangents of hollow glass powder reinforced epoxy composites: a pilot study ." Journal of Applied Polymer Science. 119 (5), pp. 2945-2952. https://doi.org/10.1002/app.33009Article
Numerical predictions of air temperature and velocity distribution to assist in the design of natural ventilation piggery buildings
Mossad, R. R.. 2011. "Numerical predictions of air temperature and velocity distribution to assist in the design of natural ventilation piggery buildings." Australian Journal of Multi-Disciplinary Engineering. 8 (2), pp. 181-187.Article
The effect of titanium dioxide addition on the hydraulic and mechanical properties of permeable concrete
Bolt, Jason, Zhuge, Yan and Bullen, Frank. 2011. "The effect of titanium dioxide addition on the hydraulic and mechanical properties of permeable concrete." Wyche, J. (ed.) 25th Biennial Conference of the Concrete Institute of Australia (Concrete 2011): Building a Sustainable Future. Perth, Australia 12 - 14 Oct 2011 Perth, Australia.Paper
Analysis of a typical railway turnout sleeper system using grillage beam analogy
Manalo, Allan, Aravinthan, Thiru, Karunasena, Warna and Stevens, Nick. 2012. "Analysis of a typical railway turnout sleeper system using grillage beam analogy." Finite Elements in Analysis and Design. 48 (1), pp. 1376-1391. https://doi.org/10.1016/j.finel.2011.08.007Article
Numerical simulation of the mechanical behaviour of porous concrete
Lian, Chunqi, Zhuge, Yan and Beecham, Simon. 2011. "Numerical simulation of the mechanical behaviour of porous concrete." Engineering Computations: international journal for computer-aided engineering and software. 28 (8), pp. 984-1002. https://doi.org/10.1108/02644401111178992Article
Compact local approximations employed with integrated RBFs for second-order elliptic differential equations
Mai-Duy, Nam and Tran-Cong, Thanh. 2011. "Compact local approximations employed with integrated RBFs for second-order elliptic differential equations." Yang, Yeong-Bin, Leu, Liang-Jenq and Chen, Chuin-Shan David (ed.) 3rd International Symposium on Computational Mechanics (ISCM III) and 2nd Symposium on Computational Structural Engineering (CSE II). Taipei, Taiwan 05 - 07 Dec 2011 Taiwan.Presentation
A stable and accurate control-volume technique based on integrated radial basis function networks for fluid-flow problems
Mai-Duy, N. and Tran-Cong, T.. 2011. "A stable and accurate control-volume technique based on integrated radial basis function networks for fluid-flow problems." Teh, Kian, Davies, Ian and Howard, Ian (ed.) 6th Australasian Congress on Applied Mechanics (ACAM 6). Perth, Western Australia 12 - 15 Dec 2010 Perth, Western Australia. Taylor & Francis. https://doi.org/10.1080/14484846.2011.11464606Paper
A numerical technique based on integrated RBFs for the system evolution in molecular dynamics
Mai-Duy, N., Tran-Cong, T. and Phan-Thien, N.. 2011. "A numerical technique based on integrated RBFs for the system evolution in molecular dynamics." CMES Computer Modeling in Engineering and Sciences. 79 (4), pp. 223-236. https://doi.org/10.3970/cmes.2011.079.223Article
High-order upwind methods based on C2-continuous two-node integrated-RBF elements for viscous flows
An-Vo, D. A., Mai-Duy, N. and Tran-Cong, T.. 2011. "High-order upwind methods based on C2-continuous two-node integrated-RBF elements for viscous flows." CMES Computer Modeling in Engineering and Sciences. 80 (2), pp. 141-177. https://doi.org/10.3970/cmes.2011.080.141Article
A C2-continuous control-volume technique based on cartesian grids and two-node integrated-RBF elements for second-order elliptic problems
An-Vo, D. A., Mai-Duy, N. and Tran-Cong, T.. 2011. "A C2-continuous control-volume technique based on cartesian grids and two-node integrated-RBF elements for second-order elliptic problems." CMES Computer Modeling in Engineering and Sciences. 72 (4), pp. 299-334. https://doi.org/10.3970/cmes.2011.072.299Article
A hybrid EMST-modified Curl's model for turbulent combustion modelling
Noor, M. M., Wandel, Andrew P. and Yusaf, T. F.. 2011. "A hybrid EMST-modified Curl's model for turbulent combustion modelling." University of Southern Queensland's Research Evening: Showcasing USQ Research (2011). Toowoomba, Australia 17 Nov 2011Poster
Study of random particle interactions for analysis of diffusion lengths in turbulent combustion modelling
Noor, M. M., Yusaf, T. F. and Wandel, Andrew P.. 2011. "Study of random particle interactions for analysis of diffusion lengths in turbulent combustion modelling." Kennedy, Eric, Dlugogorski, Bogdan, Moghtaderi, Behdad and Masri, Assaad (ed.) 11th Australian Combustion Symposium (ACS 2011). Newcastle, Australia 29 Nov - 01 Dec 2011 Sydney, Australia.Paper
Buckling and vibration analysis of laminated composite plate/shell structures via a smoothed quadrilateral flat shell element with in-plane rotations
Nguyen-Van, H., Mai-Duy, N., Karunasena, W. and Tran-Cong, T.. 2011. "Buckling and vibration analysis of laminated composite plate/shell structures via a smoothed quadrilateral flat shell element with in-plane rotations." Computers and Structures. 89 (7-8), pp. 612-625. https://doi.org/10.1016/j.compstruc.2011.01.005Article
Free vibration analysis of laminated composite plates based on FSDT using one-dimensional IRBFN method
Ngo-Cong, D., Mai-Duy, N., Karunasena, W. and Tran-Cong, T.. 2011. "Free vibration analysis of laminated composite plates based on FSDT using one-dimensional IRBFN method." Computers and Structures. 89 (1-2), pp. 1-13. https://doi.org/10.1016/j.compstruc.2010.07.012Article
A high-order upwind control-volume method based on integrated RBFs for fluid-flow problems
Mai-Duy, N. and Tran-Cong, T.. 2011. "A high-order upwind control-volume method based on integrated RBFs for fluid-flow problems." International Journal for Numerical Methods in Fluids. 67 (12), pp. 1973-1992. https://doi.org/10.1002/fld.2477Article
Crack identification in reinforced concrete beams using ANSYS software
Dahmani, L., Khennane, A. and Kaci, S.. 2010. "Crack identification in reinforced concrete beams using ANSYS software ." Strength of Materials. 42 (2), pp. 232-240. https://doi.org/10.1007/s11223-010-9212-6Article
Sensorless commutation of printed circuit brushless direct current motors
Ahfock, A. and Gambetta, D.. 2010. "Sensorless commutation of printed circuit brushless direct current motors ." IET Electric Power Applications. 4 (6), pp. 397-406. https://doi.org/10.1049/iet-epa.2009.0133Article
Development of a Ludwieg tube with free piston compression heating for scramjet inlet starting experiments
Buttsworth, David R. and Smart, Michael K.. 2010. "Development of a Ludwieg tube with free piston compression heating for scramjet inlet starting experiments ." 48th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition (AIAA 2010). Orlando, United States 04 - 07 Jan 2010 Reston, VA. United States.Paper
Integrated radial basis function methods for structural, fluid flow and fluid-structure interaction analyses
Ngo-Cong, Duc. 2012. Integrated radial basis function methods for structural, fluid flow and fluid-structure interaction analyses. PhD Thesis Doctor of Philosophy. University of Southern Queensland.PhD Thesis
Radial-basis-function calculations of heat and viscous flows in multiply-connected domains
Le-Cao, Khoa. 2011. Radial-basis-function calculations of heat and viscous flows in multiply-connected domains. PhD Thesis Doctor of Philosophy. University of Southern Queensland.PhD Thesis
RBF-based meshless modeling of strain localization and fracture
Le, Phong. 2010. RBF-based meshless modeling of strain localization and fracture. PhD Thesis Doctor of Philosophy. University of Southern Queensland.PhD Thesis
Integrated radial basis function methods for Newtonian and non-Newtonian fluid flows
Ho-Minh, Dao. 2011. Integrated radial basis function methods for Newtonian and non-Newtonian fluid flows. PhD Thesis Doctor of Philosophy. University of Southern Queensland.PhD Thesis
ANN for tribological applications
Nasir, Touqeer, Salih, Nbhan D., Hui, Liew T., Wen, Chin Chee and Yousif, B. F.. 2010. "ANN for tribological applications." Ghia, Urmila (ed.) 2009 ASME International Mechanical Engineering Congress and Exposition (IMECE 2009). Florida, United States of America 13 - 19 Nov 2009 United States. https://doi.org/10.1115/IMECE2009-10161Paper
Influence of casting temperature on the thermal stability of Cu- and Zr-based metallic glasses: theoretical analysis and experiments
Zhu, Z. W., Zhang, H. F., Wang, H., Ding, B. Z. and Hu, Z. Q.. 2008. "Influence of casting temperature on the thermal stability of Cu- and Zr-based metallic glasses: theoretical analysis and experiments." Journal of Materials Research. 23 (10), pp. 2714-2719. https://doi.org/10.1557/jmr.2008.0335Article
Direct full surface skin friction measurement using nematic liquid crystal techniques
Buttsworth, D. R., Elston, S. J. and Jones, T. V.. 1998. "Direct full surface skin friction measurement using nematic liquid crystal techniques." Journal of Turbomachinery. 120 (4), pp. 847-853. https://doi.org/10.1115/1.2841798Article
Can the influence of mechanical impedance improve structural crash worthiness?
Brell, Edward, Van Erp, Gerard and Snook, Chris. 1999. "Can the influence of mechanical impedance improve structural crash worthiness?" Bradford , Mark A., Bridge, Russell Q. and Foster, Stephen J. (ed.) 16th Australasian Conference on the Mechanics of Structures and Materials (ACMSM16). Sydney, Australia 08 - 10 Dec 1999 Rotterdam, Netherlands.Paper
Modelling the response to deep foundations under oblique loading
Johnson, K., Lemcke, Pamela M., Karunasena, W. and Sivakugan, Nagaratnam. 2003. "Modelling the response to deep foundations under oblique loading." Zerger, Andre and Argent, Robert M. (ed.) 15th International Congress on Modelling and Simulation (MODSIM03). Townsville, Australia 14 - 17 Jul 2003 Canberra, Australia. Modelling and Simulation Society of Australia and New Zealand .Paper
The prediction of damage to masonry houses caused by foundation movements
Zhuge, Yan, Jin, Feng and Hunt, Suzanne P.. 2004. "The prediction of damage to masonry houses caused by foundation movements." Advances in Structural Engineering: an international journal. 7 (1), pp. 81-93. https://doi.org/10.1260/136943304322985783Article
Numerical simulation of inviscid transient flows in shock tube and its validations
Al-Falahi, Amir, Yusoff, M. Z. and Yusaf, T.. 2008. "Numerical simulation of inviscid transient flows in shock tube and its validations." International Journal of Mechanical, Aerospace, Industrial and Mechatronics Engineering. 2 (7), pp. 1-11.Article
Air motor for improved engine brake efficiency: design and preliminary experiments
Malpress, R. and Buttsworth, D. R.. 2009. "Air motor for improved engine brake efficiency: design and preliminary experiments." Abidin, Izham Bin Datuk Zainal (ed.) 3rd International Conference on Energy and Environment (ICEE 2009): Advancement Towards Global Sustainability. Malacca, Malaysia 07 - 08 Dec 2009 Malaysia. https://doi.org/10.1109/ICEENVIRON.2009.5398658Paper
Synthesis and characterization of modified phenolic resins for composites with enhanced mechanical properties
Cardona, F. and Moscou, C.. 2009. "Synthesis and characterization of modified phenolic resins for composites with enhanced mechanical properties." Aravinthan, Thiru, Karunasena, Warna (Karu) and Wang, Hao (ed.) 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM20). Toowoomba, Australia 02 - 05 Dec 2008 London, United Kingdom.Paper
Optimization of the ventilation system for a forced ventilation piggery
Mossad, Ruth. 2009. "Optimization of the ventilation system for a forced ventilation piggery." Journal of Green Building. 4 (4), pp. 113-133. https://doi.org/10.3992/jgb.4.4.113Article
A comparison between two-position variable compression ratio and continuously variable compression ratio engines using numerical simulation
Malpress, Ray and Buttsworth, David R.. 2009. "A comparison between two-position variable compression ratio and continuously variable compression ratio engines using numerical simulation." Callahan, Tim (ed.) ASME Internal Combustion Engine Division Fall Technical Conference (ICEF 2009). Lucerne, Switzerland 27 - 30 Sep 2009 United States. https://doi.org/10.1115/ICEF2009-14042Paper