401799. Mechanical engineering not elsewhere classified


Title401799. Mechanical engineering not elsewhere classified
Parent4017. Mechanical engineering

Latest research outputs

Sort by Date Title
Case study of liquid suction heat exchanger in a mechanical refrigeration system using alternative refrigerants
Mahmood, Raid Ahmed. 2020. "Case study of liquid suction heat exchanger in a mechanical refrigeration system using alternative refrigerants." International Journal of Engineering and Technology(Uae). 9 (3), pp. 644-649. https://doi.org/10.14419/ijet.v9i3.30777

Article

Simulation and experimental study of a synthetic jet valveless pump
Le Van, Luan, Bui, Tung Thanh, Nhu, Cuong Nguyen, Ngoc, An Nguyen, Dinh, Thien Xuan, Dang, Lam Bao, Tran, Canh-Dung, Duc, Trinh Chu and Dau, Van Thanh. 2020. "Simulation and experimental study of a synthetic jet valveless pump." IEEE-ASME Transactions on Mechatronics. 25 (3), pp. 1162-1170. https://doi.org/10.1109/TMECH.2019.2960332

Article

Experimental and Numerical Investigation of Two-phase Flow Orientation Direction Change on a Vertical Flash Tank Separator
Mahmood, Raid Ahmed, Buttsworth, David and Malpress, Ray. 2019. "Experimental and Numerical Investigation of Two-phase Flow Orientation Direction Change on a Vertical Flash Tank Separator ." International Journal of Management and Applied Science (IJMAS). 5 (4), pp. 25-29.

Article

Computational and experimental investigation of using an extractor in a vertical gravitational flash tank separator
Mahmood, R. A., Buttsworth, D. and Malpress, R.. 2019. "Computational and experimental investigation of using an extractor in a vertical gravitational flash tank separator." International Journal of Automotive and Mechanical Engineering. 16 (2), pp. 6706-6722.

Article

Undergraduate engineering and built environment project conference 2019: book of abstracts - Toowoomba, Australia, 23-27 September 2019
Kist, Alexander A. (ed.) 2019. Undergraduate engineering and built environment project conference 2019: book of abstracts - Toowoomba, Australia, 23-27 September 2019. Toowoomba, Australia. University of Southern Queensland.

Edited book

Measurement of water vapour in axisymmetric jet development using TDLAS
Al-Manea, A., Buttsworth, D., Leis, J., Choudhury, R. and Saleh, K.. 2018. "Measurement of water vapour in axisymmetric jet development using TDLAS." Lau, T. C. W. and Kelso, R. M. (ed.) 21st Australasian Fluid Mechanics Conference (AFMC 2018). Adelaide, Australia 10 - 13 Dec 2018 Australia. Australasian Fluid Mechanics Society.

Paper

Development of a weighted leanness measurement method in modular construction companies
Shams Bidhendi, Saba, Goh, Steven and Wandel, Andrew. 2019. "Development of a weighted leanness measurement method in modular construction companies." Journal of Industrial Engineering International. 15 (4), pp. 603-625. https://doi.org/10.1007/s40092-019-0313-y

Article

Prediction of delamination in glass fibre reinforced composite materials using elasto-plastic modelling
Kakei, Ayad Arab Ghaidan. 2019. Prediction of delamination in glass fibre reinforced composite materials using elasto-plastic modelling . PhD Thesis Doctor of Philosophy. University of Southern Queensland. https://doi.org/10.26192/5f71653799a0a

PhD Thesis

Constant Rate of Momentum Change Ejector: simulation, experiments and flow visualisation
Alsafi, Mohamed. 2017. Constant Rate of Momentum Change Ejector: simulation, experiments and flow visualisation. PhD Thesis Doctor of Philosophy. University of Southern Queensland. https://doi.org/10.26192/5c09f124f0ccf

PhD Thesis

Experimental and numerical investigation of spray characteristics of butanol-diesel blends
Algayyim, Sattar Jabbar Murad, Wandel, Andrew P. and Yusaf, Talal. 2017. "Experimental and numerical investigation of spray characteristics of butanol-diesel blends." Masri, A. R., Cleary, M., Dunn, M., Kourmatzis, A., Hawkes, E., Kook, S. and Chan, Q. N. (ed.) 11th Asia-Pacific Conference on Combustion. Sydney, Australia 10 - 14 Dec 2017 Australia.

Paper

An Australian case study in identifying perceived barriers to innovation and technology transfer among drilling assets in CSG infrastructures
Davoodian, Daniel. 2017. An Australian case study in identifying perceived barriers to innovation and technology transfer among drilling assets in CSG infrastructures. PhD Thesis Doctor of Philosophy. University of Southern Queensland. https://doi.org/10.26192/5c05b4c2d30c6

PhD Thesis

Quantitative and qualitative analyses of mechanical behavior and dimensional stability of styrene-based shape memory composites
Al Azzawi, Wessam, Islam, Mainul M., Leng, Jinsong, Li, Fengfeng and Epaarachchi, Jayantha A.. 2017. "Quantitative and qualitative analyses of mechanical behavior and dimensional stability of styrene-based shape memory composites." Journal of Intelligent Material Systems and Structures. 28 (20), pp. 3115-3126. https://doi.org/10.1177/1045389X17705210

Article

Wind tunnel experiments on effects of woven wire screens and buffer zones in mitigating risks associated with firebrand showers
Sharifian, Ahmad and Hashempour, Javad. 2020. "Wind tunnel experiments on effects of woven wire screens and buffer zones in mitigating risks associated with firebrand showers." Australian Journal of Mechanical Engineering. 18 (2), pp. 156-168. https://doi.org/10.1080/14484846.2018.1447225

Article

Australian Journal of Mechanical Engineering
Yeoh, Guan Heng, Rasul, Mohammad G. and Goh, Steven. 2018. "Australian Journal of Mechanical Engineering ." Australian Journal of Mechanical Engineering. 16 (1), pp. 1-1. https://doi.org/10.1080/14484846.2018.1433590

Editorial

Effective factors on the performance of woven wire screens against leaf firebrand attacks
Hashempour, Javad and Sharifian, Ahmad. 2017. "Effective factors on the performance of woven wire screens against leaf firebrand attacks." Journal of Fire Sciences. 35 (4), pp. 303-316. https://doi.org/10.1177/0734904117709203

Article

Simulation and measurement of condensation and mixing effects in steam ejectors
Ariafar, Kavous. 2016. Simulation and measurement of condensation and mixing effects in steam ejectors. PhD Thesis Doctor of Philosophy. University of Southern Queensland. https://doi.org/10.26192/5bf607abed353

PhD Thesis

Comparison on intracochlear disturbances between drilling a manual and robotic cochleostomy
Z. Assadi, Masoud, Du, Xinli, Dalton, James, Henshaw, Scott, Coulson, Chris J., Reid, Andrew. P., Proops, David W. and Brett, Peter N.. 2013. "Comparison on intracochlear disturbances between drilling a manual and robotic cochleostomy ." Proceedings of the Institution of Mechanical Engineers Part H: Journal of Engineering in Medicine. 227 (9), pp. 1002-1008. https://doi.org/10.1177/0954411913488507

Article

Characterization of a diesel engine operating with a small proportion of methanol as a fuel additive in biodiesel blend
Mat Yasin, M. H., Yusaf, Talal, Mamat, R. and Yusop, A. Fitri. 2014. "Characterization of a diesel engine operating with a small proportion of methanol as a fuel additive in biodiesel blend." Applied Energy. 114, pp. 865-873. https://doi.org/10.1016/j.apenergy.2013.06.012

Article

An investigation on tensile, compression and flexural properties of natural fibre reinforced polyester composites
Yousif, B. F., Jye, W. K. and El-Tayeb, N. S. M.. 2007. "An investigation on tensile, compression and flexural properties of natural fibre reinforced polyester composites." 2007 ASME International Mechanical Engineering Congress and Exposition (IMECE 2007). Seattle, United States of America 11 - 15 Nov 2007 Boston, Massachusetts, USA.

Paper

Experimental measurement of direct thermal radiation through single-layer square-cell plain woven screens
Hashempour, Javad, Sharifian, Ahmad and Billingsley, John. 2016. "Experimental measurement of direct thermal radiation through single-layer square-cell plain woven screens." Journal of Heat Transfer: Transactions of the ASME. 138 (1), pp. 012701-1-012701-6. https://doi.org/10.1115/1.4031110

Article

Neutral and charged boron-doped fullerenes for CO2 adsorption
de Silva, Suchitra W., Du, Aijun, Senadeera, Wijitha and Gu, YuanTong. 2014. "Neutral and charged boron-doped fullerenes for CO2 adsorption." Beilstein Journal of Nanotechnology. 5, pp. 413-418. https://doi.org/10.3762/bjnano.5.49

Article

Numerical simulation of three dimensional turbulent flow structure and heat transfer in ribbed-straight, divergent and convergent ducts
Etminan, Amin, Harun, Zambri and Sharifian, Ahmad. 2016. "Numerical simulation of three dimensional turbulent flow structure and heat transfer in ribbed-straight, divergent and convergent ducts." International Journal of Mechanics. 10, pp. 362-367.

Article

Geometrical optimization of a swirling Savonius wind turbine using an open jet wind tunnel
Al-Faruk, Abdullah and Sharifian, Ahmad. 2016. "Geometrical optimization of a swirling Savonius wind turbine using an open jet wind tunnel." Alexandria Engineering Journal. 55 (3), pp. 2055-2064. https://doi.org/10.1016/j.aej.2016.07.005

Article

Detection and characterisation of delamination damage propagation in woven glass fibre reinforced polymer composite using thermoelastic response mapping
Kakei, Ayad, Epaarachchi, J. A., Islam, Mainul, Leng, J. and Rajic, N.. 2016. "Detection and characterisation of delamination damage propagation in woven glass fibre reinforced polymer composite using thermoelastic response mapping." Composite Structures. 153, pp. 442-450. https://doi.org/10.1016/j.compstruct.2016.06.044

Article

A novel ember shower simulator for assessing performance of low porosity screens at high wind speeds against firebrand attacks
Sharifian, Ahmad and Hashempour, Javad. 2016. "A novel ember shower simulator for assessing performance of low porosity screens at high wind speeds against firebrand attacks." Journal of Fire Sciences. 34 (4), pp. 335-355. https://doi.org/10.1177/0734904116655175

Article

Effects of flow parameters on the performance of vertical axis swirling type Savonius wind turbine
Al-Faruk, A. and Sharifian, A. S.. 2015. "Effects of flow parameters on the performance of vertical axis swirling type Savonius wind turbine." International Journal of Automotive and Mechanical Engineering. 12 (July-December), pp. 2929-2943. https://doi.org/10.15282/ijame.12.2015.10.0245

Article

Variable length connecting rod
Malpress, Ray. 2016. Variable length connecting rod. 2012283734

Patent

Impacts of room temperature on the performance of a portable propane air conditioner
Sharifian, Ahmad and Tangalajuk Siang, Jeri. 2015. "Impacts of room temperature on the performance of a portable propane air conditioner." International Journal of Air-Conditioning and Refrigeration. 23 (2), pp. 1550015-1. https://doi.org/10.1142/S2010132515500157

Article

Bushfire traps: the application of mesh screens to contain bushfires
Hashempour, Javad, Sharifian, Ahmad and Billingsley, John. 2015. "Bushfire traps: the application of mesh screens to contain bushfires." 2015 Fire Protection Australia Conference (FPA2015). Gold coast, Australia 25 - 26 Mar 2015

Paper

Development and validation of a mechanical thorax surrogate for the evaluation of the blunt trauma due to ballistic impacts
Thota, Narasimha. 2014. Development and validation of a mechanical thorax surrogate for the evaluation of the blunt trauma due to ballistic impacts. Doctorate other than PhD Doctor of Engineering. University of Southern Queensland.

Doctorate other than PhD

Machinability of natural fibre reinforced polymeric composites
Al-Saeed, Talal S.. 2014. Machinability of natural fibre reinforced polymeric composites. PhD Thesis Doctor of Philosophy. University of Southern Queensland.

PhD Thesis

Non-velocity based analysis of passive ultrasonic signal for source location detection in composite plates: a pilot study
Hafizi, Z. M., Epaarachchi, J., Nizwan, C. K. E. and Lau, K. T.. 2012. "Non-velocity based analysis of passive ultrasonic signal for source location detection in composite plates: a pilot study." 1st International Conference of Mechanical Engineering Research (ICMER 2011). Kuantan, Malaysia 05 - 07 Dec 2011 Bristol, United Kingdom . https://doi.org/10.1088/1757-899X/36/1/012008

Paper

Alternative fuels from microalgae for diesel engine
Al-lwayzy, Saddam H.. 2012. "Alternative fuels from microalgae for diesel engine." Yusaf, Talal, Baker, Paul and Jensen, Troy (ed.) USQ Combustion Meeting 2012 (10th October). Toowoomba, Australia 10 Oct 2012 Toowoomba, Australia.

Presentation

Burning characteristics of coconut oil In micro-combustor
Wardana, I. N. G.. 2012. "Burning characteristics of coconut oil In micro-combustor." Noor, M. M., Baker, Paul and Yusaf, Talal F. (ed.) USQ Combustion Meeting 2012 (26th November). Toowoomba, Australia 26 Nov 2012 Toowoomba, Australia.

Presentation

Investigating the efficiency of ultrasound for controlling bio-fouling in batch membrane systems
Yusaf, T. F. and Al-Juboori, Raed Ahmed. 2012. "Investigating the efficiency of ultrasound for controlling bio-fouling in batch membrane systems ." Noor, M. M., Baker, Paul and Yusaf, Talal F. (ed.) USQ Combustion Meeting 2012 (21st November). Toowoomba, Australia 21 Nov 2012 Toowoomba, Australia.

Presentation

The use of microalgae biodiesel in diesel engine: production, extraction and engine performance
Yusaf, T. F. and Al-lwayzy, Saddam H.. 2012. "The use of microalgae biodiesel in diesel engine: production, extraction and engine performance." Noor, M. M., Baker, Paul and Yusaf, Talal F. (ed.) USQ Combustion Meeting 2012 (21st November). Toowoomba, Australia 21 Nov 2012 Toowoomba, Australia.

Presentation

Betelnut fibres as an alternative to glass fibres to reinforce thermoset composites: a comparative study
Nirmal, Umar, Hashim, Jamil, Lau, Saijod T. W., Yuhazri, M. Y. and Yousif, B. F.. 2012. "Betelnut fibres as an alternative to glass fibres to reinforce thermoset composites: a comparative study." Textile Research Journal. 82 (11), pp. 1107-1120. https://doi.org/10.1177/0040517512439945

Article

Drilling apparatus and methods
Brett, Peter, Taylor, Robin, Proops, David, Coulson, Chris and Griffiths, Mansel V.. 2013. Drilling apparatus and methods. US8463421 B2

Patent

Measuring strain using microwave energy
Trethewey, M.. 2013. Measuring strain using microwave energy. Masters Thesis Master of Engineering (Research). University of Southern Queensland.

Masters Thesis

A comparison of measured diesel emissions in agriculture and Australian National Standard Emission Factors
Naji, Ahmed Adel. 2013. A comparison of measured diesel emissions in agriculture and Australian National Standard Emission Factors. Masters Thesis Master of Engineering (Research). University of Southern Queensland.

Masters Thesis