Department of Mechanical and Mechatronic Engineering
Latest research outputs
412 results found
Sort by Date Title
Proceedings of the 2010 Southern Region Engineering Conference (SREC 2010)
Goh, Steven C. and Wang, Hao (ed.) 2010. Proceedings of the 2010 Southern Region Engineering Conference (SREC 2010). Toowoomba, Australia. Engineers Australia.Authored book
Energy, water, and economic implications of water re-use in rice-based irrigation systems, the Philippines
Hafeez, Mohsin M., Bouman, Bas and Mushtaq, Shahbaz. 2010. "Energy, water, and economic implications of water re-use in rice-based irrigation systems, the Philippines." IRC 2010: Rice for Future Generations. Hanoi, Vietnam 08 - 12 Nov 2010Poster
Tribological behaviour of KFRE composite
Chin, C. W. and Yousif, B. F.. 2010. "Tribological behaviour of KFRE composite." International Journal of Modern Physics B. 24 (28), pp. 5589-5599. https://doi.org/10.1142/S0217979210056232Article
Deformation behavior of semisolid A356 alloy prepared by low temperature pouring
Ning, Z. L., Wang, H. and Sun, J. F.. 2010. "Deformation behavior of semisolid A356 alloy prepared by low temperature pouring." Materials and Manufacturing Processes. 25 (7), pp. 648-653. https://doi.org/10.1080/10426910903447279Article
Effect of oil palm fibres volume fraction on mechanical properties of polyester composites
Yousif, B. F.. 2010. "Effect of oil palm fibres volume fraction on mechanical properties of polyester composites." International Journal of Modern Physics B. 24 (23), pp. 4459-4470. https://doi.org/10.1142/S0217979210056633Article
Three-body abrasion on wear and frictional performance of treated betelnut fibre reinforced epoxy (T-BFRE) composite
Yousif, B. F., Nirmal, Umar and Wong, K. J.. 2010. "Three-body abrasion on wear and frictional performance of treated betelnut fibre reinforced epoxy (T-BFRE) composite." Materials and Design. 31 (9), pp. 4514-4521. https://doi.org/10.1016/j.matdes.2010.04.008Article
Wear characteristics of thermoset composite under high stress three-body abrasive
Yousif, B. F. and El-Tayeb, N. S. M.. 2010. "Wear characteristics of thermoset composite under high stress three-body abrasive." Tribology International. 43 (12), pp. 2365-2371. https://doi.org/10.1016/j.triboint.2010.08.010Article
Australian agriculture - adaptations to climate change
Craig, I., Goh, S. and Mushtaq, S.. 2010. "Australian agriculture - adaptations to climate change." Climate Adaptation Futures: Preparing for the Unavoidable Impacts of Climate Change (2010). Gold Coast, Australia 29 Jun - 01 Jul 2010 Brisbane, Australia.Poster
Depth of anaesthesia: measuring or guessing?
Landers, Richard, Wen, Peng and Pather, Selvan. 2010. "Depth of anaesthesia: measuring or guessing?" Kuo, Way, Tsui, Lap Chee and Sung, Jao Yiu (ed.) IEEE/NANOMED 2010: Promoting Good Health with Nanotechnology. Hong Kong, China 05 - 09 Dec 2010 Hong Kong. https://doi.org/10.1109/NANOMED.2010.5749809Paper
Effects of Nd on microstructures and properties at the elevated temperature of a Mg-0.3Zn-0.32Zr alloy
Ning, Z. L., Wang, H., Liu, H. H., Cao, F. Y., Wang, S. T. and Sun, J. F.. 2010. "Effects of Nd on microstructures and properties at the elevated temperature of a Mg-0.3Zn-0.32Zr alloy." Materials and Design. 31 (9), pp. 4438-4444. https://doi.org/10.1016/j.matdes.2010.04.021Article
The role of casting temperature in preparation of bulk metallic glasses
Wang, Hao. 2010. "The role of casting temperature in preparation of bulk metallic glasses ." Chandra, T., Wanderka, N., Reimers, W. and Ionescu, M. (ed.) 6th International Conference on Processing and Manufacturing of Advanced Materials (THERMEC 2009): Processing, Fabrication, Properties, Applications. Berlin, Germany 25 - 29 Aug 2009 Switzerland. https://doi.org/10.4028/www.scientific.net/MSF.638-642.1671Paper
Preliminary results on literature review skills of students doing capstone projects
Ku, Harry S. and Goh, Steven C.. 2010. "Preliminary results on literature review skills of students doing capstone projects." Goh, Steven C. and Wang, Hao (ed.) 2010 Southern Region Engineering Conference (SREC 2010). Toowoomba, Australia 11 - 12 Nov 2010 Toowoomba, Australia.Paper
Cellular automaton modeling of semisolid microstructure formation
Li, Qiang, Yu, Baoyi, Zhang, Huawen, Li, Runxia, Wang, Feng, Xie, Shuisheng, Huang, Guojie and Wang, Hao. 2010. "Cellular automaton modeling of semisolid microstructure formation." China Foundry. 7 (2), pp. 143-148.Article
Thin-layer drying characteristics of banana slices in a force convection indirect solar drying
Fadhel, M. I., Abdo, Ramez Abdulwasea, Yousif, B. F., Zaharim, Azami and Sopian, K.. 2011. "Thin-layer drying characteristics of banana slices in a force convection indirect solar drying." Bojkovic, Zoran, Kacprzyk, Janusz, Mastorakis, Nikos, Mladenov, Valeri, Revetria, Roberto, Zadeh, Lotfi A. and Zemliak, Alexander (ed.) 6th IASME/WSEAS International Conference on Energy and Environment (EE 2011): Recent Researches in Energy and Environment. Cambridge, United Kingdom 23 - 25 Feb 2011 Cambridge, United Kingdom.Paper
Badminton training machine with impact mechanism
Yousif, B. F. and Yeh, Kok Soon. 2011. "Badminton training machine with impact mechanism." Journal of Engineering Science and Technology. 6 (1), pp. 61-68.Article
Experimental and modeling investigation of the performance characteristics on diesel HCCI with hydrogen additive - a review
Supeni, E. E., Yusaf, Talal, Wandel, Andrew P., Buttsworth, David R. and Noor, M. M.. 2010. "Experimental and modeling investigation of the performance characteristics on diesel HCCI with hydrogen additive - a review." 2nd National Conference in Mechanical Engineering Research and Postgraduate Studies. Kuantan, Malaysia 03 - 04 Dec 2010 Malaysia.Paper
Effect of compacting pressure on microstructure and mechanical properties of carbide cutting tools
Albdiry, M. T. and Almosawi, A. I.. 2011. "Effect of compacting pressure on microstructure and mechanical properties of carbide cutting tools ." Powder Metallurgy. 54 (5), pp. 585-591. https://doi.org/10.1179/1743290110Y.0000000001Article
Study of SME innovation in two Queensland industries
Thorpe, David and Goh, Steven. 2010. "Study of SME innovation in two Queensland industries." Al-Hakim, Latif and Jin, Chen (ed.) Innovation in business and enterprise: technologies and frameworks. Hershey PA, USA. IGI Global. pp. 240-259Edited book (chapter)
Qualitative methodologies for dummies: engineers in investigating the quality of final year engineering research project
Goh, Steven and Ku, Harry. 2010. "Qualitative methodologies for dummies: engineers in investigating the quality of final year engineering research project." Hudson, Peter, Chandra, Vinesh, King, Donna and Lee, Kar-Tin (ed.) 1st Science, Technology, Engineering and Mathematics in Education Conference (STEM 2010). Brisbane, Australia 26 - 27 Nov 2010 Brisbane, Australia.Paper
Development of a small icing wind tunnel for simulating the initial stages of solid phase ice accretion
Saleh, Khalid, Buttsworth, David and Yusaf, Talal. 2010. "Development of a small icing wind tunnel for simulating the initial stages of solid phase ice accretion." Mallinson, G. D. and Cater, J. E. (ed.) 17th Australasian Fluid Mechanics Conference (AFMC 2010). Auckland, New Zealand 05 - 09 Dec 2010 Auckland, New Zealand.Paper
An experimental study of wind force acting on commercial double-layered square metal screens at different spacing
Sharifian, Ahmad. 2010. "An experimental study of wind force acting on commercial double-layered square metal screens at different spacing." Mallinson, G. D. and Cater, J. E. (ed.) 17th Australasian Fluid Mechanics Conference (AFMC 2010). Auckland, New Zealand 05 - 09 Dec 2010 Auckland, New Zealand.Paper
Investigation of bispectral index filtering and improvement using wavelet transform adaptive filter
Palendeng, Mario Elvis, Wen, Peng and Goh, Steven. 2010. "Investigation of bispectral index filtering and improvement using wavelet transform adaptive filter." Kuo, Way, Tsui, Lap Chee and Sung, Jao Yiu (ed.) 4th IEEE International Conference on Nano/Molecular Medicine and Engineering (NANOMED 2010). Hong Kong, China 05 - 09 Dec 2010 Piscataway, NJ. United States. https://doi.org/10.1109/NANOMED.2010.5749796Paper
How effective is microalgae treatment of nursery wastewater for nutrient removal?
Pufelski, N., Aravinthan, V. and Yusaf, T.. 2010. "How effective is microalgae treatment of nursery wastewater for nutrient removal?" Goh, Steven C. and Wang, Hao (ed.) 2010 Southern Region Engineering Conference (SREC 2010). Toowoomba, Australia 11 - 12 Nov 2010 Toowoomba, Australia.Paper
Microalgae as alternative fuel for compression ignition (CI) Engines
Allwayzy, S. H., Yusaf, T., McCabe, B., Pittaway, P. and Aravinthan, V.. 2010. "Microalgae as alternative fuel for compression ignition (CI) Engines." Goh, Steven C. and Wang, Hao (ed.) 2010 Southern Region Engineering Conference (SREC 2010). Toowoomba, Australia 11 - 12 Nov 2010 Toowoomba, Australia.Paper
A review of common and alternative methods for disinfection of microorganisms in water
Al-Juboori, Raed, Aravinthan, Vasantha and Yusaf, Talal. 2010. "A review of common and alternative methods for disinfection of microorganisms in water." Goh, Steven C. and Wang, Hao (ed.) 2010 Southern Region Engineering Conference (SREC 2010). Toowoomba, Australia 11 - 12 Nov 2010 Toowoomba, Australia.Paper
A new engineering management master to address the personal, professional and educational needs of engineering graduates to achieve EA chartered status
Goh, Steven C., Jokic, Michael D. and Hartle, Todd. 2010. "A new engineering management master to address the personal, professional and educational needs of engineering graduates to achieve EA chartered status." Gardner, Anne and Jolly, Lesley (ed.) 21st Annual Conference for the Australasian Association of Engineering Education (AAEE 2010). Sydney, Australia 05 - 08 Dec 2010 Sydney, Australia.Paper
An investigation of spectral response of embedded Fibre Bragg Grating (FBG) sensors in a hollow composite cylindrical beam under pure torsion and combined loading
Kahandawa, Gayan C., Epaarachchi, Jayantha A., Wang, Hao, Followell, David, Birt, Peter, Canning, John and Stevenson, Michael. 2010. "An investigation of spectral response of embedded Fibre Bragg Grating (FBG) sensors in a hollow composite cylindrical beam under pure torsion and combined loading." Teh, Kian, Davies, Ian and Howard, Ian (ed.) 6th Australasian Congress on Applied Mechanics (ACAM 6). Perth, Western Australia 12 - 15 Dec 2010 Perth, Australia.Paper
Determining operational requirements to optimise monolayer performance on a farm dam via a 'Universal Design Framework'
Brink, Gavin, Wandel, Andrew P., Pittaway, Pam, Hancock, Nigel and Pather, Selvan. 2010. "Determining operational requirements to optimise monolayer performance on a farm dam via a 'Universal Design Framework'." Montagu, Kelvin (ed.) Australian Irrigation Conference and Exibition 2010: One Water Many Futures. Sydney, Australia 08 - 10 Jun 2010 Sydney, Australia.Poster
A ‘universal design framework’ for installation planning and operational management of evaporation-suppressing films on agricultural reservoirs
Brink, Gavin, Wandel, Andrew P., Pittaway, Pam, Hancock, Nigel and Pather, Selvan. 2010. "A ‘universal design framework’ for installation planning and operational management of evaporation-suppressing films on agricultural reservoirs." Genet, Roger (ed.) International Conference on Agricultural Engineering: Towards Environmental Technologies (2010). Clermont-Ferrand, France 06 - 08 Sep 2010Paper
Investigating the effect of electro-osmosis on sandy soil near saturated conditions
Huweg, Abdurrahman F. S., Kamel, Fouad and Raine, Steven. 2010. "Investigating the effect of electro-osmosis on sandy soil near saturated conditions." Goh, Steven C. and Wang, Hao (ed.) 2010 Southern Region Engineering Conference (SREC 2010). Toowoomba, Australia 11 - 12 Nov 2010 Toowoomba, Australia.Paper
User-controlled electrical energy consumption towards optimized usage of electricity infrastructure
Marwan, Marwan and Kamel, Fouad. 2010. "User-controlled electrical energy consumption towards optimized usage of electricity infrastructure." Goh, Steven C. and Wang, Hao (ed.) 2010 Southern Region Engineering Conference (SREC 2010). Toowoomba, Australia 11 - 12 Nov 2010 Toowoomba, Australia .Paper
Using computer software packages to enhance the teaching in engineering management science: part 3 - simulation
Ku, H. and Fulcher, R.. 2012. "Using computer software packages to enhance the teaching in engineering management science: part 3 - simulation ." Computer Applications in Engineering Education. 20 (3), pp. 547-552. https://doi.org/10.1002/cae.20423Article
Using computer software packages to enhance the teaching in engineering management science: part 2 - programming techniques
Ku, H. and Fulcher, R.. 2012. "Using computer software packages to enhance the teaching in engineering management science: part 2 - programming techniques ." Computer Applications in Engineering Education. 20 ( 1), pp. 114-123. https://doi.org/10.1002/cae.20379Article
Inertisation of highwall mining to control methane concentrations at the Moura mine
Mossad, Ruth, Vella, Anthony and Balusu, Rao. 2009. "Inertisation of highwall mining to control methane concentrations at the Moura mine." Witt, P. J. and Schwarz, M. P. (ed.) 7th International Conference on Computational Fluid Dynamics in the Minerals and Process Industries (CFD 2009). Melbourne, Australia 09 - 11 Dec 2009 Melbourne, Australia.Paper
The engineering manager of the 21st century: implications for education and professional development [Keynote address]
Goh, Steven C.. 2008. "The engineering manager of the 21st century: implications for education and professional development [Keynote address]." CELM Victoria Seminar Series (March 2008). Melbourne, Australia 12 Mar 2008 Melbourne, Australia.Presentation
Numerical modeling of flow in a horizontal sand filter
Mossad, Ruth and Aral, Hal. 2010. "Numerical modeling of flow in a horizontal sand filter." American Journal of Engineering and Applied Sciences. 3 (2), pp. 286-292.Article
Magnesium and magnesium alloys as degradable metallic biomaterials
Wang, H., Shi, Z. M. and Yang, K.. 2008. "Magnesium and magnesium alloys as degradable metallic biomaterials." Bell, John, Yan, Cheng, Ye, Lin and Zhang, Liangchi (ed.) International Conference on Frontiers in Materials Science and Technology (FMST 2008). Brisbane, Australia 26 - 28 Mar 2008 Zurich, Switzerland. https://doi.org/10.4028/www.scientific.net/AMR.32.207Paper
Abrasive wear behaviour of epoxy composite based on kenaf fibres
Yousif, B. F. and Yusaf, Talal. 2010. "Abrasive wear behaviour of epoxy composite based on kenaf fibres." Gwidon, Stachowiak (ed.) ASIATRIB 2010: Frontiers in Tribology - Knowledge and Friendship. Perth, Australia 05 - 09 Dec 2010Paper
Adhesive wear and frictional characteristics of UHMWPE and HDPE sliding against different counterfaces under dry contact condition
Yousif, B. F., Alsofyani, I. M. and Yusaf, Talal. 2010. "Adhesive wear and frictional characteristics of UHMWPE and HDPE sliding against different counterfaces under dry contact condition." Tribology. 4 (2), pp. 78-85. https://doi.org/10.1179/175158310X12678019274408Article
Final year engineering projects in Australia and Europe
Ku, H. and Goh, S.. 2010. "Final year engineering projects in Australia and Europe." European Journal of Engineering Education. 35 (2), pp. 161-173. https://doi.org/10.1080/03043790903497336Article
0
total views0
total downloads0
views this month0
downloads this month