Department of Agricultural, Civil and Environmental Engineering
Latest research outputs
275 results found
Sort by Date Title
Buildings: climate change
Guan, Lisa and Chen, Guangnan. 2012. "Buildings: climate change." Jorgensen, Sven Erik (ed.) Encyclopedia of environmental management. New York, NY. United States. CRC Press. pp. 457-463Edited book (chapter)
Calculation of lateral earth pressures with layered backfill
Shiau, J. S. and Smith, C. A.. 2011. "Calculation of lateral earth pressures with layered backfill." Sainsbury, David, Hart, Roger, Detournay, Christine and Nelson, Michele (ed.) Continuum and Distinct Element Numerical Modeling in Geomechanics (2011). Melbourne, Australia 14 - 16 Feb 2011 Minneapolis, MN, USA.Paper
Can the influence of mechanical impedance improve structural crash worthiness?
Brell, Edward, Van Erp, Gerard and Snook, Chris. 1999. "Can the influence of mechanical impedance improve structural crash worthiness?" Bradford , Mark A., Bridge, Russell Q. and Foster, Stephen J. (ed.) 16th Australasian Conference on the Mechanics of Structures and Materials (ACMSM16). Sydney, Australia 08 - 10 Dec 1999 Rotterdam, Netherlands.Paper
Capability of APSIM-Oryza to stimulate lowland rice-based farming systems under nitrogen treatments in a tropical climate
Suriadi, Ahmad, Gaydon, Donald, Abawi, Yahya and Misra, R. K.. 2009. "Capability of APSIM-Oryza to stimulate lowland rice-based farming systems under nitrogen treatments in a tropical climate." Hatfield, Jerry L. and Hanson, Jon D. (ed.) 2nd Biennial International Symposium on Farming Systems Design: Methodologies for Integrated Analysis of Farm Production Systems. Monterey, United States 23 - 26 Aug 2009Paper
Centre pivot and lateral move machines
Foley, Joseph P.. 2008. "Centre pivot and lateral move machines." Smith, Peter and Madden, Elizabeth (ed.) WATERpak: a guide for irrigation management in cotton. Narrabri, Australia. Cotton Research and Development Corporation. pp. 195-220Edited book (chapter)
Centre pivot and lateral move machines, 1st ed.
Foley, Joseph P.. 2004. "Centre pivot and lateral move machines, 1st ed." Dugdale, Helen, Harris, Graham, Neilsen, James, Richards, Dirk, Roth, Guy and Williams, David (ed.) WATERpak - A guide for irrigation management in cotton. Narrabri, NSW, Australia. Cotton Research and Development Corporation. pp. 195-220Edited book (chapter)
Challenges in offering engineering programs at a new campus
Thorpe, David, Swan, Taryn and Hannigan, Delphine. 2009. "Challenges in offering engineering programs at a new campus." Kestell, Colin, Grainger, Steven and Cheung, John (ed.) 20th Annual Conference for the Australasian Association of Engineering Education (AAEE 2009). Adelaide, Australia 06 - 09 Dec 2009 Adelaide, Australia.Paper
Challenges in the design and delivery of an online postgraduate course in fibre composites
Aravinthan, Thiru. 2010. "Challenges in the design and delivery of an online postgraduate course in fibre composites." Ye, Lieping, Feng, Peng and Yue, Qingrui (ed.) 5th International Conference on FRP Composites in Civil Engineering (CICE 2010). Beijing, China 27 - 29 Sep 2010 Beijing, China.Paper
Characterising land ownership patterns in a salt-affected catchment: key implications for revegetation
Apan, Armando, Raine, Steven R., Cockfield, Geoff and Le Brocque, Andrew F.. 2003. "Characterising land ownership patterns in a salt-affected catchment: key implications for revegetation." 2003 Spatial Sciences Institute Biennial Conference: Spatial Knowledge Without Boundaries (SSC2003). Canberra, Australia 22 - 27 Sep 2003 Canberra, Australia.Paper
Chemical engineering industry transition towards sustainability
Hasna, Abdallah M.. 2009. "Chemical engineering industry transition towards sustainability." Mudd, Gavin M. (ed.) SSEE 2009: Solutions for a Sustainable Planet . Melbourne, Australia 22 - 24 Nov 2009 Melbourne, Australia.Paper
Climate change, contemporary society and engineering practice: a sustainability journey
Hasna, Abdallah M.. 2009. "Climate change, contemporary society and engineering practice: a sustainability journey." The International Journal of Climate Change: Impacts and Responses. 1 (4), pp. 139-150.Article
Closure to 'Strength analysis of steel-concrete composite beams in combined bending and shear' by Qing Quan Liang, Brian Uy, Mark A. Bradford and Hamid R. Ronagh
Liang, Qing Quan, Uy, Brian, Bradford, Mark A. and Ronagh, Hamid R.. 2007. "Closure to 'Strength analysis of steel-concrete composite beams in combined bending and shear' by Qing Quan Liang, Brian Uy, Mark A. Bradford and Hamid R. Ronagh." Journal of Structural Engineering. 133 (2), pp. 309-310. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:2(309)Notes or commentaries
CNG-diesel engine performance and exhaust emission analysis with the aid of artificial neural network
Yusaf, Talal F., Buttsworth, D. R., Saleh, Khalid H. and Yousif, B. F.. 2010. "CNG-diesel engine performance and exhaust emission analysis with the aid of artificial neural network." Applied Energy. 87 (5), pp. 1661-1669. https://doi.org/10.1016/j.apenergy.2009.10.009Article
Co-doped mesoporous titania photocatalysts prepared from a peroxo-titanium complex solution
El Saliby, Ibrahim, Erdei, Laszlo, McDonagh, Andrew, Kim, Jong-Beom, Kim, Jong-Ho and Shon, Ho Kyong. 2014. "Co-doped mesoporous titania photocatalysts prepared from a peroxo-titanium complex solution." Materials Research Bulletin. 49 (1), pp. 7-13. https://doi.org/10.1016/j.materresbull.2013.08.047Article
Co-doped photocatalyst nanomaterials for effective utilisation of solar radiation
El Saliby, Ibrahim, Shon, Ho Kyong, Erdei, Laszlo, Kim, Jong-Beom and Kim, Jong-Ho. 2011. "Co-doped photocatalyst nanomaterials for effective utilisation of solar radiation." Hu, Eric (ed.) 8th Asia Pacific Conference on Sustainable Energy and Environmental Technologies (APCSEET 2011). Adelaide, Australia 10 - 13 Jul 2011 Adelaide, South Australia.Paper
Combined titrimetric respirometer as a real-time sensor to monitor the aerobic biodegradation process of different substrates
Hoque, M. A., Aravinthan, V., Pradhan, N. M. and Sakhiya, A.. 2011. "Combined titrimetric respirometer as a real-time sensor to monitor the aerobic biodegradation process of different substrates." Journal of Applied Sciences. 11 (13), pp. 2299-2305. https://doi.org/10.3923/jas.2011.2299.2305Article
Commonality of rainfall variables influencing suspended solids concentrations in storm runoff from three different urban impervious surfaces
Brodie, Ian M. and Dunn, Peter K.. 2010. "Commonality of rainfall variables influencing suspended solids concentrations in storm runoff from three different urban impervious surfaces." Journal of Hydrology. 387 (3-4), pp. 202-211. https://doi.org/10.1016/j.jhydrol.2010.04.008Article
Comparison of methods to estimate suspended solids loads in urban stormwater
Brodie, Ian and Porter, Mark. 2007. "Comparison of methods to estimate suspended solids loads in urban stormwater." Australian Journal of Water Resources. 11 (2), pp. 221-230.Article
Comparison of plagiarism rates between oncampus and offcampus engineering hydrology students
Brodie, I. M. and Hellyer, L.. 2012. "Comparison of plagiarism rates between oncampus and offcampus engineering hydrology students." Avdelas, Aris (ed.) 40th Annual Conference of European Society for Engineering Education (SEFI 2012): Engineering Education 2020: Meet the Future. Thessaloniki, Greece 23 - 26 Sep 2012 Brussels, Belgium.Paper
Comparison of storage requirements for two different stormwater harvesting strategies
Brodie, Ian. 2008. "Comparison of storage requirements for two different stormwater harvesting strategies." Stormwater 2008. Surfers Paradise, Australia 08 - 11 Jul 2008 Queensland.Paper
Concentrating solar power: parabolic trough with 20% gas boost (CSP-PT+20%)
Craig, Ian, Thorpe, David, Kamel, Fouad and Goh, Steven. 2010. "Concentrating solar power: parabolic trough with 20% gas boost (CSP-PT+20%)." Goh, Steven C. and Wang, Hao (ed.) 2010 Southern Region Engineering Conference (SREC 2010). Toowoomba, Australia 11 - 12 Nov 2010 Toowoomba, Australia.Paper
Contaminated soil/groundwater remediation using Permeable Reactive Barrier (PRB) techniques
Craig, Ian, Shiau, Jim and Erdei, Laszlo. 2012. "Contaminated soil/groundwater remediation using Permeable Reactive Barrier (PRB) techniques." 2012 Southern Regional Engineering Conference (SREC 2012). Toowoomba, Australia 01 Sep 2012 Canberra, Australia.Paper
Contemporary society, technology and sustainability
Hasna, Abdallah M.. 2009. "Contemporary society, technology and sustainability." International Journal of Technology, Knowledge and Society. 5 (1), pp. 13-20.Article
Cost optimum design of structural fibre composite sandwich panel for flooring applications
Awad, Ziad K., Aravinthan, Thiru and Zhuge, Yan. 2011. "Cost optimum design of structural fibre composite sandwich panel for flooring applications." Ye, Lieping, Feng, Peng and Yue, Qingrui (ed.) 5th International Conference on FRP Composites in Civil Engineering (CICE 2010). Beijing, China 27 - 29 Sep 2010 Beijing, China.Paper
Creep response of polymeric honeycombs
Banerjee, Sourish. 2011. "Creep response of polymeric honeycombs." Bhattacharyya, D., Lin, R. J. T. and Srivatsan, T. S. (ed.) 19th International Symposium on Processing and Fabrication of Advanced Materials (PFAM XIX). Auckland, New Zealand 14 - 17 Jan 2011 Auckland, New Zealand.Paper
Design and analysis of a composite beam for infrastructure applications - Part I: preliminary investigation in bending
Springolo, Mario, Van Erp, Gerard and Khennane, Amar. 2006. "Design and analysis of a composite beam for infrastructure applications - Part I: preliminary investigation in bending ." International Journal of Materials and Product Technology. 25 (4), pp. 297-313. https://doi.org/10.1504/IJMPT.2006.008885Article
Design and analysis of a composite beam for infrastructure applications - Part II: preliminary investigation in shear and torsion
Springolo, Mario, Van Erp, Gerard and Khennane, Amar. 2006. "Design and analysis of a composite beam for infrastructure applications - Part II: preliminary investigation in shear and torsion ." International Journal of Materials and Product Technology. 25 (4), pp. 313-331.Article
Design and analysis of a composite beam for infrastructure applications - Part III: experimental results and nonlinear FE analysis
Springolo, Mario, Khennane, Amar and Van Erp, Gerard. 2006. "Design and analysis of a composite beam for infrastructure applications - Part III: experimental results and nonlinear FE analysis ." International Journal of Materials and Product Technology. 25 (4), pp. 331-347.Article
Design and development of a fibre composite wind mill structure
Omar, Tarek and Aravinthan, Thiru. 2008. "Design and development of a fibre composite wind mill structure." Gad, Emad and Wong, Bill (ed.) Australasian Structural Engineering Conference 2008: Engaging with Structural Engineering. Melbourne, Australia 26 - 27 Jun 2008 Melbourne, Victoria.Paper
Design and modeling of the structural integrity of a universal toolbar for two wheeled power tiller
Fraser, M. J., Chen, Guangnan, Esdaile, R. J. and Yang, Zhou. 2009. "Design and modeling of the structural integrity of a universal toolbar for two wheeled power tiller." Banhazi, T. M. and Saunders, C. (ed.) SEAg 2009: Agricultural Technologies In a Changing Climate. Brisbane, Australia 13 - 16 Sep 2009 Brisbane, Queensland.Paper
Design of public health engineering course using multimedia resources for dual mode delivery
Aravinthan, Vasantha. 2010. "Design of public health engineering course using multimedia resources for dual mode delivery." Gardner, Anne and Jolly, Lesley (ed.) 21st Annual Conference for the Australasian Association of Engineering Education (AAEE 2010). Sydney, Australia 05 - 08 Dec 2010 Sydney, Australia.Paper
Designing an ideal assessment scheme for dual mode delivery
Aravinthan, Vasantha. 2010. "Designing an ideal assessment scheme for dual mode delivery." Engineering Education Conference (EE 2010): Inspiring the Next Generation of Engineers . Birmingham, United Kingdom 06 - 08 Jul 2010 Liverpool, UK.Paper
Developing a learning community to support student learning in a first year statics course
Devine, Jo and Kimmins, Lindy. 2010. "Developing a learning community to support student learning in a first year statics course." Gardner, Anne and Jolly, Lesley (ed.) 21st Annual Conference for the Australasian Association of Engineering Education (AAEE 2010). Sydney, Australia 05 - 08 Dec 2010 Sydney, Australia.Paper
Developing a track model for testing the road pavement under repeated moving surface loads
Shiau, Jim S., Perumal, Tagarajan, Benjamin, Michael, Pather, Selvan and Ayers, Ron. 2006. "Developing a track model for testing the road pavement under repeated moving surface loads." 22nd ARRB Conference: Research Into Practice. Canberra, Australia 29 Oct - 02 Nov 2006 Canberra, Australia.Paper
Developing ENSO-based irrigation water forecast system in a region with limited hydro-meteorological observations to mitigate the impacts of climate variability: a case study in Lombok, Indonesia
Zhang, X., Abawi, Yahya, Dutta, Sunil and McClymont, David. 2010. "Developing ENSO-based irrigation water forecast system in a region with limited hydro-meteorological observations to mitigate the impacts of climate variability: a case study in Lombok, Indonesia." Climate Adaptation Futures: Preparing for the Unavoidable Impacts of Climate Change (2010). Gold Coast, Australia 29 Jun - 01 Jul 2010 Brisbane, Australia.Poster
Developing numerical models for the design of cantilever sheet pile wall
Shiau, Jim and Smith, Catherine. 2013. "Developing numerical models for the design of cantilever sheet pile wall." Vimonsatit, Vanissorn, Singh, Amarjit and Yazdani, Siamak (ed.) 1st Australasia and South East Asia Conference in Structural Engineering and Construction (ASEA-SEC-1). Perth, Australia 28 Nov - 02 Dec 2012 Singapore.Paper
Developing physical models for geotechnical teaching and research
Shiau, Jim S., Pather, Selvan and Ayers, Ron. 2006. "Developing physical models for geotechnical teaching and research." Ng, C. W. W., Zhang, L. M. and Wang, Y. H. (ed.) 6th International Conference on Physical Modelling in Geotechnics. Hong Kong, China 04 - 06 Aug 2006 Hong Kong.Paper
Development and implementation of a postgraduate technology management program
Thorpe, David. 2004. "Development and implementation of a postgraduate technology management program ." Thorpe, David and Snook, Chris (ed.) 15th Annual Conference of the Australasian Association for Engineering Education (AAEE 2004). Toowoomba, Australia 27 - 29 Sep 2004 Melbourne, Australia.Paper
Development of a customised software module within the Moodle LMS for team-based PBL courses
Zhou, Hong, Goh, Steven C., Worden, John, Tschirpig, Barry, Yong, Andrew and Brodie, Lyn. 2010. "Development of a customised software module within the Moodle LMS for team-based PBL courses." Gardner, Anne and Jolly, Lesley (ed.) 21st Annual Conference for the Australasian Association of Engineering Education (AAEE 2010). Sydney, Australia 05 - 08 Dec 2010 Sydney, Australia.Paper
Development of a small icing wind tunnel for simulating the initial stages of solid phase ice accretion
Saleh, Khalid, Buttsworth, David and Yusaf, Talal. 2010. "Development of a small icing wind tunnel for simulating the initial stages of solid phase ice accretion." Mallinson, G. D. and Cater, J. E. (ed.) 17th Australasian Fluid Mechanics Conference (AFMC 2010). Auckland, New Zealand 05 - 09 Dec 2010 Auckland, New Zealand.Paper
0
total views0
total downloads0
views this month0
downloads this month