401205. Experimental methods in fluid flow, heat and mass transfer
| Title | 401205. Experimental methods in fluid flow, heat and mass transfer |
|---|---|
| Parent | 4012. Fluid mechanics and thermal engineering |
Latest research outputs
Sort by Date Title
Design of short Venturi flow meters for incompressible and isothermal flow applications
Wells, Keith and Sharifian, Ahmad. 2024. "Design of short Venturi flow meters for incompressible and isothermal flow applications." Heliyon. 10 (7). https://doi.org/10.1016/j.heliyon.2024.e29311Article
Performance Assessment of ISO-5167 and Symmetrical Venturi Meters for Measuring Low Reynolds Number Turbulent Incompressible Isothermal Flow
Sharifian-Barforoush, Ahmad and Wells, Keith. 2024. "Performance Assessment of ISO-5167 and Symmetrical Venturi Meters for Measuring Low Reynolds Number Turbulent Incompressible Isothermal Flow ." International Journal of Thermofluids. 22. https://doi.org/10.1016/j.ijft.2024.100598Article
Effect of Upward Inclination Angle on Flow Energy Loss in Symmetrical and Asymmetrical Venturi Meters for Single-Phase Incompressible Isothermal Low Reynolds Number Turbulent Flows
Sharifian, Ahmad and Wells, Keith. 2023. "Effect of Upward Inclination Angle on Flow Energy Loss in Symmetrical and Asymmetrical Venturi Meters for Single-Phase Incompressible Isothermal Low Reynolds Number Turbulent Flows." Gongcheng Kexue yu Jishu. 55 (9), pp. 4077-4092.Article
Experimental investigation of a novel variable geometry radial ejector
Al-Rbaihat, Raed, Saleh, Khalid, Malpress, Ray and Buttsworth, David. 2023. "Experimental investigation of a novel variable geometry radial ejector." Applied Thermal Engineering. 233. https://doi.org/10.1016/j.applthermaleng.2023.121143Article
Laser-Induced Diaphragm Rupture for Improved Sequencing and Repeatability in a Hypersonic Facility
Birch, Byrenn, Buttsworth, David and Zander, Fabian. 2023. "Laser-Induced Diaphragm Rupture for Improved Sequencing and Repeatability in a Hypersonic Facility." Journal of Spacecraft and Rockets. 60 (1), pp. 351-360. https://doi.org/10.2514/1.A35427Article
Effect of Inlet Pressure, Size and Wind Speed of an Evaporator on Amount of Refrigerant Charge and Performance of a Portable Propane Air Conditioner
Tangalajuk Siang, Jeri and Sharifian, Ahmad. 2018. "Effect of Inlet Pressure, Size and Wind Speed of an Evaporator on Amount of Refrigerant Charge and Performance of a Portable Propane Air Conditioner." 4th International Conference on Science and Technology (ICST 2018). Yogyakarta, Indonesia 07 - 08 Aug 2018 New York, United States. https://doi.org/10.1109/ICSTC.2018.8528623Paper
Interview with UNSW for the 2020 International Women in Engineering Day
Sopek, Tamara. 2020. Interview with UNSW for the 2020 International Women in Engineering Day.Recorded or Rendered Creative Work
Development and commissioning of the T6 Stalker Tunnel
Collen, Peter, Doherty, Luke J., Subiah, Suria D., Sopek, Tamara, Jahn, Ingo, Gildfind, David, Geraets, Rowland Penty, Gollan, Rowan, Hambidge, Christopher, Morgan, Richard and McGilvray, Matthew. 2021. "Development and commissioning of the T6 Stalker Tunnel." Experiments in Fluids: experimental methods and their applications to fluid flow. 62, pp. 1-24. https://doi.org/10.1007/s00348-021-03298-1Article
Thermal compression effects within a fundamental, hydrogen-fuelled scramjet
Vanyai, Tristan, Brieschenk, Stefan, Bricalli, Mathew, Sopek, Tamara and McIntyre, Timothy J.. 2021. "Thermal compression effects within a fundamental, hydrogen-fuelled scramjet." Aerospace Science and Technology. 110, pp. 1-16. https://doi.org/10.1016/j.ast.2021.106499Article
Nitrogen driver for low-enthalpy testing in free-piston-driven shock tunnels
Chan, W. Y. K., Whitside, R. W., Smart, M. K., Gildfind, D. E., Jacobs, P. A. and Sopek, T.. 2021. "Nitrogen driver for low-enthalpy testing in free-piston-driven shock tunnels." Shock Waves: an international journal on shock waves, detonations and explosions. 31, pp. 541-550. https://doi.org/10.1007/s00193-021-01002-0Article
Optimization of combustion in micro combined heat and power (mCHP) system with the biomass-Stirling engine using SiO2 and Al2O3 nanofluids
Najafi, G., Hoseini, S. S., De Goey, L. P. H. and Yusaf, Talal. 2020. "Optimization of combustion in micro combined heat and power (mCHP) system with the biomass-Stirling engine using SiO2 and Al2O3 nanofluids." Applied Thermal Engineering. 169 (114936), pp. 1-9. https://doi.org/10.1016/j.applthermaleng.2020.114936Article
Mixing of Thermally Stratified Gas in Horizontal Tube Using Shock Waves Research Methodology
Grybko, Maciej, Malpress, Ray, Buttsworth, David, Zander, Fabian and Birch, Byrenn. 2022. "Mixing of Thermally Stratified Gas in Horizontal Tube Using Shock Waves Research Methodology." 23rd Australasian Fluid Mechanics Conference (AFMC2022). Sydney, Australia 04 - 08 Dec 2022 Australia. University of Sydney.Paper
Fast-Response transient heat flux measurements in a plasma wind tunnel
Birch, Byrenn, Buttsworth, David, Loehle, Stefan and Hufgard, Fabian. 2021. "Fast-Response transient heat flux measurements in a plasma wind tunnel." International Journal of Heat and Mass Transfer. 173. https://doi.org/10.1016/j.ijheatmasstransfer.2021.121234Article
A study on the performance of a portable single-duct propane air conditioner and ways of reducing the amount of refrigerant
Tangalajuk Siang, Jeri. 2021. A study on the performance of a portable single-duct propane air conditioner and ways of reducing the amount of refrigerant. PhD Thesis Doctor of Philosophy. University of Southern Queensland. https://doi.org/10.26192/q6v66PhD Thesis
Effect of scramjet inlet vortices on fuel plume elongation and mixing rate
Llobet, J.R., Gollan, R.J. and Jahn, I.H.. 2019. "Effect of scramjet inlet vortices on fuel plume elongation and mixing rate ." Aeronautical Journal. 123 (1265), pp. 1032-1052. https://doi.org/10.1017/aer.2019.45Article
Modelling the compressive strength and thermal properties of foam concrete
Li, Qiang. 2017. Modelling the compressive strength and thermal properties of foam concrete. Masters Thesis Master of Engineering. University of Southern Queensland. https://doi.org/10.26192/5c05c048d30c8Masters Thesis
Corrosion effects of CNT-nanofluids on different metals
Ismail, A. F., Anuar, A., Rashmi, W. and Yusaf, T.. 2014. "Corrosion effects of CNT-nanofluids on different metals." 3rd International Conference on Advanced Materials and Information Technology Processing (AMITP 2013). Los Angeles, United States 01 - 02 Dec 2013 Southampton, United Kingdom. https://doi.org/10.2495/AMITP20130171Paper
Inorganic polymer foams: transform from non-structural to structural upon fire
Zhang, Zuhua, Yang, Tao, Wang, Hao and Yao, Xiao. 2013. "Inorganic polymer foams: transform from non-structural to structural upon fire." Epaarachchi, Jayantha A., Lau, Alan Kin-tak and Leng, Jinsong (ed.) 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013). Gold Coast, Australia 10 - 12 Jul 2013 Bellingham, WA. United States. https://doi.org/10.1117/12.2027739Paper
Experimental measurement of direct thermal radiation through single-layer square-cell plain woven screens
Hashempour, Javad, Sharifian, Ahmad and Billingsley, John. 2016. "Experimental measurement of direct thermal radiation through single-layer square-cell plain woven screens." Journal of Heat Transfer: Transactions of the ASME. 138 (1), pp. 012701-1-012701-6. https://doi.org/10.1115/1.4031110Article
Microstructure and properties of Mg-Nd-Zn-Zr alloys
Wang, H., Ning, Z. L., Liang, W. Z., Cao, F. Y. and Sun, J. F.. 2010. "Microstructure and properties of Mg-Nd-Zn-Zr alloys." 2009 International Conference and Exhibition on Materials and AustCeram (MA 2009). Gold Coast, Australia 01 - 03 Jul 2009 Melbourne, Australia.Paper
A novel ember shower simulator for assessing performance of low porosity screens at high wind speeds against firebrand attacks
Sharifian, Ahmad and Hashempour, Javad. 2016. "A novel ember shower simulator for assessing performance of low porosity screens at high wind speeds against firebrand attacks." Journal of Fire Sciences. 34 (4), pp. 335-355. https://doi.org/10.1177/0734904116655175Article
Impacts of room temperature on the performance of a portable propane air conditioner
Sharifian, Ahmad and Tangalajuk Siang, Jeri. 2015. "Impacts of room temperature on the performance of a portable propane air conditioner." International Journal of Air-Conditioning and Refrigeration. 23 (2), pp. 1550015-1. https://doi.org/10.1142/S2010132515500157Article
Investigating corrosion effects and heat transfer enhancement in smaller size radiators using CNT-nanofluids
Rashmi, W., Ismail, A. F., Khalid, M., Anuar, A. and Yusaf, T.. 2014. "Investigating corrosion effects and heat transfer enhancement in smaller size radiators using CNT-nanofluids." Journal of Materials Science. 49 (13), pp. 4544-4551. https://doi.org/10.1007/s10853-014-8154-yArticle
An Experimental Investigation of a Thermal Compression Scramjet with OH Imaging
Vanyai, Tristan, Bricalli, Mathew, Sopek, Tamara, Brieschenk, Stefan and McIntyre, Timothy J.. 2015. "An Experimental Investigation of a Thermal Compression Scramjet with OH Imaging." 20th AIAA International Space Planes and Hypersonic Systems and Technologies Conference (AIAA 2015). Glasgow, Scotland 06 - 09 Jul 2015 Reston, United States. https://doi.org/10.2514/6.2015-3610Paper
Modeling of heat transfer in rotational molding
Banerjee, S., Yan, W. and Bhattacharyya, D.. 2008. "Modeling of heat transfer in rotational molding." Polymer Engineering and Science. 48 (11), pp. 2188-2197. https://doi.org/10.1002/pen.21164Article
Fly ash-based geopolymers: the relationship between composition, pore structure and efflorescence
Zhang, Zuhua, Provis, John L., Reid, Andrew and Wang, Hao. 2014. "Fly ash-based geopolymers: the relationship between composition, pore structure and efflorescence." Cement and Concrete Research. 64, pp. 30-41. https://doi.org/10.1016/j.cemconres.2014.06.004Article
Smaller radiator with enhanced heat transfer using CNT-nanofluids
Ismail, A. F., Abd-Halim, B. A., Rashmi, W. and Yusaf, T.. 2014. "Smaller radiator with enhanced heat transfer using CNT-nanofluids ." Yang, G. (ed.) International Conference on Future Energy, Environment, and Materials (FEEM 2013). Hong Kong, China 24 - 25 Dec 2013 Southampton, United Kingdom. https://doi.org/10.2495/FEEM20130221Paper
Effect of in-situ TiC particles on hot deformation behavior of spray formed 7075 Al alloy
Liu, Hui-min, Li, Zhi-peng and Wang, Hao. 2013. "Effect of in-situ TiC particles on hot deformation behavior of spray formed 7075 Al alloy." Transactions of Materials and Heat Treatment (Cailiao Rechuli Xuebao). 34 (S2), pp. 173-178.Article
A direct forcing immersed boundary method employed with compact integrated RBF approximations for heat transfer and fluid flow problems
Thai-Quang, N., Mai-Duy, N., Tran, C.-D. and Tran-Cong, T.. 2013. "A direct forcing immersed boundary method employed with compact integrated RBF approximations for heat transfer and fluid flow problems." CMES Computer Modeling in Engineering and Sciences. 96 (1), pp. 49-90. https://doi.org/10.3970/cmes.2013.096.049Article
Code Development to Determine the Temperature from the OH* Chemiluminescence Recordings in a Supersonic Combusting Flow
Sopek, Tamara, Brieschenk, Stefan, Lorrain, Philippe, McIntyre, Timothy J. and Boyce, Russell R.. 2014. "Code Development to Determine the Temperature from the OH* Chemiluminescence Recordings in a Supersonic Combusting Flow." 45th AIAA Plasmadynamics and Lasers Conference (2014). Atlanta, United States 16 - 20 Jun 2014 United States. https://doi.org/10.2514/6.2014-2243Paper
An aerolance system
Jokic, Michael David. 2014. An aerolance system. Application number: WO2013AU00769 20130711Patent
Processing of materials using electromagnetic fields
Ku, Harry S.. 2012. "Processing of materials using electromagnetic fields." Nicolais, Luigi and Borzacchiello, Assunta (ed.) Wiley encyclopedia of composites, 2nd ed.. Hoboken, NJ. United States. John Wiley & Sons. pp. 2487-2500Edited book (chapter)
Predicting the flow stress behavior of Ni-42.5Ti-3Cu during hot deformation using constitutive equations
Etaati, Amir, Dehghani, Kamran, Ebrahimi, G. R. and Wang, Hao. 2013. "Predicting the flow stress behavior of Ni-42.5Ti-3Cu during hot deformation using constitutive equations." Metals and Materials International. 19 (1), pp. 5-9. https://doi.org/10.1007/s12540-013-1002-9Article
Numerical simulation of porous structure in foam concrete on thermal insulation property
Li, Qiang, Wang, Hao, Bullen, Frank and Reid, Andrew. 2012. "Numerical simulation of porous structure in foam concrete on thermal insulation property ." Jaafar, M, Azura, A. R., Leong, K. H. and Leong, A. Y. L. (ed.) 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today. Kuala Lumpur, Malaysia 06 - 08 Nov 2012 Kowloon, Hong Kong.Paper
The shortest period sdB plus white dwarf binary CD-30 11223 (GALEX J1411-3053)
Vennes, S., Kawka, A., O'Toole, S. J., Nemeth, P. and Burton, D.. 2012. "The shortest period sdB plus white dwarf binary CD-30 11223 (GALEX J1411-3053)." The Astrophysical Journal Letters. 759 (1), pp. L25 (1)-L25 (5). https://doi.org/10.1088/2041-8205/759/1/L25Article
A pilot study on the relationship between mechanical and electrical loss tangents of glass powder reinforced epoxy composites post-cured in microwaves
Ku, H., Wong, P., Maxwell, A., Huang, J., Fung, H. and Mohan, T.. 2011. "A pilot study on the relationship between mechanical and electrical loss tangents of glass powder reinforced epoxy composites post-cured in microwaves." Zhu, Zeng (ed.) ICKEM 2011: 1st International Conference on Key Engineering Materials. Sanya, China 25 - 27 Mar 2011 Zurich, Switzerland. https://doi.org/10.4028/www.scientific.net/AMR.214.26Paper
A stochastic micromixing model based on the turbulent diffusion length scale
Wandel, Andrew P.. 2011. "A stochastic micromixing model based on the turbulent diffusion length scale." Kennedy, Eric, Moghtaderi, Bogdan, Dlugogorski, Behdad and Masri, Assaad (ed.) 11th Australian Combustion Symposium (ACS 2011). Newcastle, Australia 29 Nov - 01 Dec 2011 Sydney, Australia.Paper
Experimental study on heat transfer coefficient and friction factor of Al2O3 nanofluid in a packed bed column
Rao, G. Srinivasa, Sharma, K. V., Chary, S. P., Bakar, R. A., Rahman, M. M., Kadirgama, K. and Noor, M. M.. 2011. "Experimental study on heat transfer coefficient and friction factor of Al2O3 nanofluid in a packed bed column." Journal of Mechanical Engineering and Sciences. 1 (1), pp. 1-15.Article
Eddy covariance measurements of the total evaporation during sprinkler irrigation - preliminary results
Uddin, J., Smith, R. J., Hancock, N. H. and Foley, J.. 2011. "Eddy covariance measurements of the total evaporation during sprinkler irrigation - preliminary results." Banhazi, T., Saunders, C. and Hegarty, R. (ed.) SEAg 2011: Diverse Challenges, Innovative Solutions. Gold Coast, Australia 29 - 30 Sep 2011 Canberra, Australia.Paper
Natural and Induced Transition on a 7deg Half-Cone at Mach 6
Masutti, Davide, Pinna, Fabio, Erkan, Gunaydinoglu, Sopek, Tamara and Chazot, Olivier. 2012. "Natural and Induced Transition on a 7deg Half-Cone at Mach 6." RTO-MP-AVT-200 Hypersonic Laminar-Turbulent Transition. San Diego, United States 16 - 19 Apr 2012 United States.Paper