401408. Manufacturing processes and technologies (excl. textiles)
| Title | 401408. Manufacturing processes and technologies (excl. textiles) |
|---|---|
| Parent | 4014. Manufacturing engineering |
Latest research outputs
Sort by Date Title
Dielectric parameter independent curing analysis of out-of-autoclave carbon fibre/epoxy composites
Hall, Molly, Zeng, Xuesen, Shelley, Tristan and Schubel, Peter. 2023. "Dielectric parameter independent curing analysis of out-of-autoclave carbon fibre/epoxy composites." Composites Part A: Applied Science and Manufacturing. 175. https://doi.org/10.1016/j.compositesa.2023.107755Article
Effect of Magnetorheological additives on the buildability of 3D concrete printing
Kanagasuntharam, Sasitharan, Ramakrishnan, Sayanthan, Muthukrishnan, Shravan and Sanjayan, Jay. 2023. "Effect of Magnetorheological additives on the buildability of 3D concrete printing." Journal of Building Engineering. 74. https://doi.org/10.1016/j.jobe.2023.106814Article
Effect of Inlet Pressure, Size and Wind Speed of an Evaporator on Amount of Refrigerant Charge and Performance of a Portable Propane Air Conditioner
Tangalajuk Siang, Jeri and Sharifian, Ahmad. 2018. "Effect of Inlet Pressure, Size and Wind Speed of an Evaporator on Amount of Refrigerant Charge and Performance of a Portable Propane Air Conditioner." 4th International Conference on Science and Technology (ICST 2018). Yogyakarta, Indonesia 07 - 08 Aug 2018 New York, United States. https://doi.org/10.1109/ICSTC.2018.8528623Paper
A study on rapid forming of aerospace stiffeners
Shelley, Tristan J,, Dickinson, Calum P. M., Tew, Hannah and Scaife, Richard J.. 2018. "A study on rapid forming of aerospace stiffeners." SAMPE Europe - Conference Southamphon 2018. Southampton, United Kingdom 11 - 13 Sep 2018 United Kingdom.Paper
Development of a weighted leanness measurement method in modular construction companies
Shams Bidhendi, Saba, Goh, Steven and Wandel, Andrew. 2019. "Development of a weighted leanness measurement method in modular construction companies." Journal of Industrial Engineering International. 15 (4), pp. 603-625. https://doi.org/10.1007/s40092-019-0313-yArticle
CRC-P Next Generation Pultrusion Processes
Schubel, Peter, Zeng, Xuesen, Shelley, Tristan and Alajarmeh, Omar. 2019. CRC-P Next Generation Pultrusion Processes. Toowoomba. https://doi.org/10.26192/3a7c-va16Dataset
Experimental assessment of the mechanical behaviour of 3D woven composite T-joints
Yan, Shibo, Zeng, Xuesen and Long, Andrew. 2018. "Experimental assessment of the mechanical behaviour of 3D woven composite T-joints." Composites Part B: Engineering. 154, pp. 108-113. https://doi.org/10.1016/j.compositesb.2018.08.007Article
Effect of yarn cross-sectional shape on resin flow through inter-yarn gaps in textile reinforcements
Endruweit, A., Zeng, X., Matveev, M. and Long, A. C.. 2018. "Effect of yarn cross-sectional shape on resin flow through inter-yarn gaps in textile reinforcements." Composites Part A: Applied Science and Manufacturing. 104, pp. 139-150. https://doi.org/10.1016/j.compositesa.2017.10.020Article
Atomic Layer Deposition of Metal Oxide on Nanocellulose for Enabling Microscopic Characterization of Polymer Nanocomposites
Septevani, Athanasia A., Evans, David A. C., Hosseini, Alireza, Martin, Darren J., Simonsen, John, Conley Jr., John F. and Annamalai, Pratheep K.. 2018. "Atomic Layer Deposition of Metal Oxide on Nanocellulose for Enabling Microscopic Characterization of Polymer Nanocomposites." Small. 14 (46). https://doi.org/10.1002/smll.201803439Article
Preparation of natural rubber/silica nanocomposites using one- and two-dimensional dispersants by latex blending process
Luo, Yongyue, Qian, Jiangzuo, He, Dongning, Tao, Jinlong, Zhao, Pengfei, Gong, Wei, Zhang, Zuhua, Peng, Zheng, Chen, Xianfei, Wang, Hao and Dan, Yi. 2018. "Preparation of natural rubber/silica nanocomposites using one- and two-dimensional dispersants by latex blending process." Polymer Composites. 39 (5), pp. 1413-1419. https://doi.org/10.1002/pc.24081Article
Performance of a single-duct portable propane air conditioning system under different refrigerant charge levels
Tangalajuk Siang, Jeri and Sharifian, Ahmad. 2017. "Performance of a single-duct portable propane air conditioning system under different refrigerant charge levels." Heat Transfer. 46 (8), pp. 1246-1261. https://doi.org/10.1002/htj.21271Article
Hemp hurd based carbon template for reaction formed silicon carbide ceramic
Yan, Z. L., Ma, T., Zhang, J. C., Zhang, H. and Wang, H.. 2013. "Hemp hurd based carbon template for reaction formed silicon carbide ceramic." Hoa, Suong Van and Hubert, Pascal (ed.) 19th International Conference on Composite Materials (ICCM-19). Montreal, Canada 28 Jul - 02 Aug 2013 Canada.Paper
The behavior of natural rubber–epoxidized natural rubber–silica composites based on wet masterbatch technique
Wang, Yueqiong, Liao, Lusheng, Zhong, Jieping, He, Dongning, Xu, Kui, Yang, Changjin, Luo, Yongyue and Peng, Zheng. 2016. "The behavior of natural rubber–epoxidized natural rubber–silica composites based on wet masterbatch technique." Journal of Applied Polymer Science. 133 (26), pp. 43571-43579. https://doi.org/10.1002/app.43571Article
Understanding the buckling behaviour of steered tows in automated dry fibre placement (ADFP)
Matveev, M. Y., Schubel, P. J., Long, A. C. and Jones, I. A.. 2016. "Understanding the buckling behaviour of steered tows in automated dry fibre placement (ADFP)." Composites Part A: Applied Science and Manufacturing. 90, pp. 451-456. https://doi.org/10.1016/j.compositesa.2016.08.014Article
Modeling of heat transfer in rotational molding
Banerjee, S., Yan, W. and Bhattacharyya, D.. 2008. "Modeling of heat transfer in rotational molding." Polymer Engineering and Science. 48 (11), pp. 2188-2197. https://doi.org/10.1002/pen.21164Article
Composite railway sleeper: a cost effective and eco-friendly alternative
Ferdous, Wahid, Manalo, Allan, Aravinthan, Thiru and Van Erp, Gerard. 2014. "Composite railway sleeper: a cost effective and eco-friendly alternative." IEEE Australia and New Zealand Student and Young Professional Congress (ANZSCON 2014). Brisbane, Australia 03 - 05 Jul 2014Poster
Controlled nucleation method: a new process for semisolid metal forming
Wang, Hao. 2005. "Controlled nucleation method: a new process for semisolid metal forming." Special Casting and Non-ferrous Alloys (Tezhong Zhuzao Ji Youse Hejin) .Article
Optimization effect of micro hardness by nanoclay clusters in nanoclay/epoxy composites
Lam, Chun-Ki and Lau, Kin-Tak. 2009. "Optimization effect of micro hardness by nanoclay clusters in nanoclay/epoxy composites ." Journal of Thermoplastic Composite Materials. 22 (2), pp. 213-225. https://doi.org/10.1177/0892705708091856Article
Drying steps under superheated steam: a review and modeling
Hamawand, Ihsan. 2013. "Drying steps under superheated steam: a review and modeling." Energy and Environment Research. 3 (2), pp. 107-125. https://doi.org/10.5539/eer.v3n2p107Article
Fabrication process optimization of hemp fibre-reinforced polypropylene composites
Yan, Z. L., Zhang, J. C., Lin, G., Zhang, H., Ding, Y. and Wang, H.. 2013. "Fabrication process optimization of hemp fibre-reinforced polypropylene composites." Journal of Reinforced Plastics and Composites. 32 (20), pp. 1504-1512. https://doi.org/10.1177/0731684413501925Article
3D X-ray microtomography study on fibre breakage in noil hemp fibre reinforced polypropylene composites
Etaati, A., Wang, H., Pather, S., Yan, Z. and Mehdizadeh, S. Abdanan. 2013. "3D X-ray microtomography study on fibre breakage in noil hemp fibre reinforced polypropylene composites." Composites Part B: Engineering. 50, pp. 239-246. https://doi.org/10.1016/j.compositesb.2013.02.029Article
Steel, material flows, and globalisation: by-product optimisation and waste management in today's steel industry
MacKillop, F.. 2012. "Steel, material flows, and globalisation: by-product optimisation and waste management in today's steel industry." Metallurgical Research and Technology. 109 (3), pp. 139-147. https://doi.org/10.1051/metal/2012013Article
A study on hot deformation behavior of Ni-42.5Ti-7.5Cu alloy
Etaati, Amir and Dehghani, Kamran. 2013. "A study on hot deformation behavior of Ni-42.5Ti-7.5Cu alloy." Materials Chemistry and Physics. 140 (1), pp. 208-215. https://doi.org/10.1016/j.matchemphys.2013.03.022Article
Dielectric properties of sawdust reinforced epoxy composites post-cured in microwaves
Ku, H., Trada, M. and Tai, P.. 2013. "Dielectric properties of sawdust reinforced epoxy composites post-cured in microwaves ." Journal of Reinforced Plastics and Composites. 32 (10), pp. 765-774. https://doi.org/10.1177/0731684412475250Article
A critical review on the manufacturing processes in relation to the properties of nanoclay/polymer composites
Albdiry, M. T., Yousif, B. F., Ku, H. and Lau, K. T.. 2013. "A critical review on the manufacturing processes in relation to the properties of nanoclay/polymer composites." Journal of Composite Materials. 47 (9), pp. 1093-1115. https://doi.org/10.1177/0021998312445592Article
Numerical simulation the temperature field of the multi-coil batch during annealing process in Bell-type furnace
Mo, Chun-li, Li, Qiang, Guo, Xu-ming and Wang, Hao. 2012. "Numerical simulation the temperature field of the multi-coil batch during annealing process in Bell-type furnace." 2nd International Conference on Advanced Engineering Materials and Technology (AEMT 2012). Zhuhai, China 06 Jul 2012 Zurich, Switzerland. https://doi.org/10.4028/www.scientific.net/AMR.538-541.637Paper
Numerical simulation of rolling process and microstructure evolution of AM50 Mg alloy during hot rolling process
Hua, Fuan, Zhang, Chaoyi, Li, Qiang, Yu, Baoyi, Liu, Weihua, Li, Runxia, Xie, Shuisheng, Huang, Guojie, Cheng, Lei, Fu, Yao and Wang, Hao. 2011. "Numerical simulation of rolling process and microstructure evolution of AM50 Mg alloy during hot rolling process ." Advanced Materials Research. 291-294, pp. 449-454. https://doi.org/10.4028/www.scientific.net/AMR.291-294.449Article
Relationship between electrical and mechanical loss tangents of hollow glass powder reinforced epoxy composites: a pilot study
Ku, H., Maxwell, A., Wong, P., Huang, J. and Fung, H.. 2011. "Relationship between electrical and mechanical loss tangents of hollow glass powder reinforced epoxy composites: a pilot study ." Journal of Applied Polymer Science. 119 (5), pp. 2945-2952. https://doi.org/10.1002/app.33009Article
Microwave processing applications in chemical engineering: cost analysis
Hasna, A. M.. 2011. "Microwave processing applications in chemical engineering: cost analysis ." Journal of Applied Sciences. 11 (21), pp. 3613-3618. https://doi.org/10.3923/jas.2011.3613.3618Article
Development of hot drawing process for nitinol tube
Chen, Wei, Wang, H., Zhang, Lei and Tang, Xiushan. 2009. "Development of hot drawing process for nitinol tube." International Journal of Modern Physics B. 23 (6/7), pp. 1968-1974. https://doi.org/10.1142/S0217979209061913Article
Magnesium thixotropic structure produced by controlled nucleation method
Wang, Hao and Ning, Zhiliang. 2007. "Magnesium thixotropic structure produced by controlled nucleation method ." Tezhong Zhuzao Ji Youse Hejin (Special Casting and Nonferrous Alloys).Article
In-situ Si/Al composite produced by semisolid metal processing
Wang, Hao. 2007. "In-situ Si/Al composite produced by semisolid metal processing." Materials and Manufacturing Processes. 22 (5-6), pp. 696-699. https://doi.org/10.1080/10426910701384963Article
Spinning CNT based composite yarns using a dry spinning process
Tran, Canh-Dung, Smith, Shaun M., Higgerson, G., Bui, Anh, Randeniya, Lakshman K. and Tran-Cong, Thanh. 2010. "Spinning CNT based composite yarns using a dry spinning process." Dzurak, Andrew (ed.) 2010 International Conference on Nanoscience and Nanotechnology (ICONN 2010). Sydney, Australia 22 - 26 Feb 2010 Piscataway, NJ. United States. https://doi.org/10.1109/ICONN.2010.6045159Paper
Improving the tensile strength of carbon nanotube spun yarns using a modified spinning process
Tran, Canh-Dung, Humphries, William, Smith, Shaun M., Huynh, Chi and Lucas, Stuart. 2009. "Improving the tensile strength of carbon nanotube spun yarns using a modified spinning process." Carbon. 47 (11), pp. 2662-2670. https://doi.org/10.1016/j.carbon.2009.05.020Article
Stationary solution of the ring-spinning balloon in zero air drag using a RBFN based mesh-free method
Tran, Canh-Dung, Phillips, David G. and Fraser, W. Barrie. 2010. "Stationary solution of the ring-spinning balloon in zero air drag using a RBFN based mesh-free method." Journal of the Textile Institute. 101 (2), pp. 101-110. https://doi.org/10.1080/00405000802273632Article
Effect of compacting pressure on microstructure and mechanical properties of carbide cutting tools
Albdiry, M. T. and Almosawi, A. I.. 2011. "Effect of compacting pressure on microstructure and mechanical properties of carbide cutting tools ." Powder Metallurgy. 54 (5), pp. 585-591. https://doi.org/10.1179/1743290110Y.0000000001Article
An investigation on the raw materials and products of the briquetting machine
Islam, Md Mainul, Khan, Kamrujjaman, Ali, Md Nawsher and Islam, Md Shahidul. 2003. "An investigation on the raw materials and products of the briquetting machine." 2003 National Seminar on the Role of Renewable and Alternative Energy Sources for National Development (SRRAESND-2003). Khulna, Bangladesh 19 - 20 Dec 2003 Pathumthani, Thailand.Paper
Evaluation of the properties of raw materials and products of briquetting machine
Islam, Md Mainul, Ali, Md Nawsher and Mia, Sobahan. 2004. "Evaluation of the properties of raw materials and products of briquetting machine." Hossain, M. Imtiaz (ed.) 2nd BSME-ASME International Conference on Thermal Engineering. Dhaka, Bangladesh 02 - 04 Jan 2004 Dhaka, Bangladesh.Paper
Microstructure of MmM5/Mg multi-layer hydrogen storage films prepared by magnetron sputtering
Ouyang, L. Z., Wang, Hao, Zhu, M., Zou, Jin and Chung, C. Y.. 2004. "Microstructure of MmM5/Mg multi-layer hydrogen storage films prepared by magnetron sputtering." Microscopy Research and Technique. 64 (4), pp. 323-329. https://doi.org/10.1002/jemt.20089Article
A reflection in the innovation and technology transfer experience in a regional micro-manufacturer: a case study
Goh, Steven and Thorpe, David. 2008. "A reflection in the innovation and technology transfer experience in a regional micro-manufacturer: a case study." Yarlagadda, Prasad (ed.) 9th Global Congress on Manufacturing and Management (GCMM2008): Towards Excellence in Smart Manufacturing and Engineering Knowledge Management. Gold Coast, Australia 12 - 14 Nov 2008 Brisbane, Australia.Paper