401699. Materials engineering not elsewhere classified
| Title | 401699. Materials engineering not elsewhere classified |
|---|---|
| Parent | 4016. Materials engineering |
Latest research outputs
Sort by Date Title
Thermo-responsive PNIPAM Hydrogel nanofibres photocrosslinked by Azido-POSS
Wang, Jing, Sutti, Alessandra, Lin, Tong and Wang, Xungai. 2013. "Thermo-responsive PNIPAM Hydrogel nanofibres photocrosslinked by Azido-POSS." Wang, Xungai (ed.) Fiber Society Spring 2013 Technical Conference (FS 2013): Advancing Scientific Knowledge Pertaining to Fibers and Fibrous Materials. Geelong, Australia 22 - 24 May 2013 Raleigh, NC. United States.Poster
Experimental investigation on the surface humidity of fabric during the process of dynamic moisture liberation
Li, Wenbin, Jiang, Peiqing, Wang, Xin, Li, Gaowen and Xu, Weilin. 2013. "Experimental investigation on the surface humidity of fabric during the process of dynamic moisture liberation." International Journal of Clothing Science and Technology. 25 (6), pp. 451-456. https://doi.org/10.1108/IJCST-05-2012-0023Article
Effect of repeated winding on carded ring cotton yarn properties
Xia, Zhigang, Wang, Xin, Ye, Wenxiang, Xu, Weilin and Eltahir, Hafiz A.. 2011. "Effect of repeated winding on carded ring cotton yarn properties ." Fibers and Polymers. 12 (4), pp. 534-540. https://doi.org/10.1007/s12221-011-0534-1Article
Properties and behaviour of gomuti fibre composites under tensile and compressive load
Ticoalu, A., Aravinthan, T. and Cardona, F.. 2013. "Properties and behaviour of gomuti fibre composites under tensile and compressive load." Samali, Bijan, Attard, Mario M. and Song, Chongmin (ed.) 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM22). Sydney, Australia 11 - 14 Dec 2012 London, United Kingdom.Paper
Role of silanised halloysite nanotubes on the morphological and materials characteristics of thermoset composites
Albdiry, Mushtaq Taleb Ali. 2014. Role of silanised halloysite nanotubes on the morphological and materials characteristics of thermoset composites. PhD Thesis Doctor of Philosophy. University of Southern Queensland.PhD Thesis
Comparative assessment of polymer concrete with different types of resin
Lokuge, Weena and Aravinthan, Thiru. 2013. "Comparative assessment of polymer concrete with different types of resin." Dao, Vinh and Dux, Peter (ed.) Concrete Institute of Australia's Biennial National Conference (Concrete 2013): Understanding Concrete. Gold Coast, Australia 16 - 18 Oct 2013 Sydney, Australia.Paper
Dry spinning carbon nanotubes into continuous yarns: progress, processing and applications
Tran, Canh-Dung. 2013. "Dry spinning carbon nanotubes into continuous yarns: progress, processing and applications." Schulz, Mark J., Shanov, Vesselin N. and Yin, Zhangzhang (ed.) Nanotube superfiber materials: changing engineering design. Oxford, United Kingdom. Elsevier. pp. 211-242Edited book (chapter)
Effect of the foam embellishments on the pedestrian safety of the vehicle front protection systems
Thota, N. M., Epaarachchi, J. A. and Lau, K. T.. 2013. "Effect of the foam embellishments on the pedestrian safety of the vehicle front protection systems." Mishra, G. C. and Sanskriti, Krishi (ed.) 3rd World Congress on Frontiers of Mechanical, Aerospace and Automotive Engineering (WCFMAAE 2013). New Delhi, India 02 - 03 Feb 2013 New Delhi, India.Paper
Peer assisted learning in an online postgraduate course on engineered fibre composites
Manalo, Allan and Aravinthan, Thiru. 2012. "Peer assisted learning in an online postgraduate course on engineered fibre composites." Mann, Llewellyn and Daniel, Scott (ed.) 23rd Annual Conference of the Australasian Association for Engineering Education (AAEE 2012). Melbourne, Australia 03 - 05 Dec 2012 Melbourne, Australia.Paper
Investigation of some fundamental properties of permeable concrete
Hussin, Manal, Zhuge, Yan, Bullen, Frank and Lokuge, Weena. 2012. "Investigation of some fundamental properties of permeable concrete." International Conference on Emerging Materials and Mechanics Applications (ICEMMA 2012):. Hangzhou, China 05 - 06 Feb 2012 Zurich, Switzerland. https://doi.org/10.4028/www.scientific.net/AMR.487.869Paper
The impact of photocatalytic TiO2 on permeable concrete mix designs and its application for the degradation of organic pollutants in water
Bolt, Jason. R.. 2013. The impact of photocatalytic TiO2 on permeable concrete mix designs and its application for the degradation of organic pollutants in water. Masters Thesis Master of Engineering (Research). University of Southern Queensland.Masters Thesis
Development of hemp oil based bioresins for biocomposites
Manthey, Nathan William. 2013. Development of hemp oil based bioresins for biocomposites. PhD Thesis Doctor of Philosophy. University of Southern Queensland.PhD Thesis
Behaviour of glass FRP composite tubes under repeated impact for piling application
Guades, Ernesto Jusayan. 2013. Behaviour of glass FRP composite tubes under repeated impact for piling application. PhD Thesis Doctor of Philosophy. University of Southern Queensland.PhD Thesis
Laboratory evaluation of the stress-strain relationship of permeable concrete
Hussin, Manal, Zhuge, Yan, Bullen, Frank and Lokuge, Weena. 2011. "Laboratory evaluation of the stress-strain relationship of permeable concrete." Advanced Materials Research. 243-24, pp. 3259-3262. https://doi.org/10.4028/www.scientific.net/AMR.243-249.3259Article
A pilot study on the relationship between mechanical and electrical loss tangents of glass powder reinforced epoxy composites post-cured in microwaves
Ku, H., Wong, P., Maxwell, A., Huang, J., Fung, H. and Mohan, T.. 2011. "A pilot study on the relationship between mechanical and electrical loss tangents of glass powder reinforced epoxy composites post-cured in microwaves." Zhu, Zeng (ed.) ICKEM 2011: 1st International Conference on Key Engineering Materials. Sanya, China 25 - 27 Mar 2011 Zurich, Switzerland. https://doi.org/10.4028/www.scientific.net/AMR.214.26Paper
Experimental investigation into gomuti fibres/polyester composites
Ticoalu, A., Aravinthan, T. and Cardona, F.. 2011. "Experimental investigation into gomuti fibres/polyester composites." Fragomeni, Sam, Venkatesan, Srikanth, Lam, Nelson T. K. and Setunge, Sujeeva (ed.) 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM 21). Melbourne, Australia 07 - 10 Dec 2010 Leiden, Netherlands. https://doi.org/10.1201/b10571-80Paper
An investigation into the effect of material composition on the fundamental properties of permeable concrete
Hussin, Manal. 2012. An investigation into the effect of material composition on the fundamental properties of permeable concrete. Masters Thesis Master of Engineering and Surveying (Research). University of Southern Queensland.Masters Thesis
Rehabilitation of deteriorated steel truss members using CFRP
Tawfik, Qaidar H.. 2012. Rehabilitation of deteriorated steel truss members using CFRP. Masters Thesis Master of Engineering (Research). University of Southern Queensland.Masters Thesis
Influence of casting temperature on the thermal stability of Cu- and Zr-based metallic glasses: theoretical analysis and experiments
Zhu, Z. W., Zhang, H. F., Wang, H., Ding, B. Z. and Hu, Z. Q.. 2008. "Influence of casting temperature on the thermal stability of Cu- and Zr-based metallic glasses: theoretical analysis and experiments." Journal of Materials Research. 23 (10), pp. 2714-2719. https://doi.org/10.1557/jmr.2008.0335Article
Solidification microstructure modelling using cellular automaton method
Wang, H. and Li, Q.. 2008. "Solidification microstructure modelling using cellular automaton method." International Conference on Frontiers in Materials Science and Technology (FMST 2008). Brisbane, Australia 26 - 28 Mar 2008 Zurich, Switzerland. https://doi.org/10.4028/www.scientific.net/AMR.32.271Paper
The development of a new grain refiner for magnesium alloys using the edge-to-edge model
Fu, H. M., Qiu, D., Zhang, M. X., Wang, H., Kelly, P. M. and Taylor, J. A.. 2008. "The development of a new grain refiner for magnesium alloys using the edge-to-edge model." Journal of Alloys and Compounds. 456 (1-2), pp. 390-394. https://doi.org/10.1016/j.jallcom.2007.02.076Article
Cu-based bulk amorphous alloy with larger glass-forming ability and supercooled liquid region
Fu, H. M., Zhang, H. F., Wang, H. and Hu, Z. Q.. 2008. "Cu-based bulk amorphous alloy with larger glass-forming ability and supercooled liquid region." Journal of Alloys and Compounds. 458 (1-2), pp. 390-393. https://doi.org/10.1016/j.jallcom.2007.03.114Article
Wet adhesive wear characteristics of untreated oil palm fibre-reinforced polyester and treated oil palm fibre-reinforced polyester composites using the pin-on-disc and block-on-ring techniques
Yousif, B. F. and El-Tayeb, N. S. M.. 2010. "Wet adhesive wear characteristics of untreated oil palm fibre-reinforced polyester and treated oil palm fibre-reinforced polyester composites using the pin-on-disc and block-on-ring techniques." Proceedings of the Institution of Mechanical Engineers Part J: Journal of Engineering Tribology. 224 (2), pp. 123-131. https://doi.org/10.1243/13506501JET655Article
Preface to futures in mechanics of structures and materials conference. ACMSM20
Aravinthan, Thiru, Karunasena, Warna (Karu) and Wang, Hao. 2009. "Preface to futures in mechanics of structures and materials conference. ACMSM20." Aravinthan, Thiru, Karunasena, Warna (Karu) and Wang, Hao (ed.) 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM20). Toowoomba, Australia 02 - 05 Dec 2008 London, United Kingdom.Other
Effect of betelnut fibres treatment and contact conditions on adhesive wear and frictional performance of polyester composites
Nirmal, Umar, Yousif, B. F., Rilling, Dirk and Brevern, P. V.. 2010. "Effect of betelnut fibres treatment and contact conditions on adhesive wear and frictional performance of polyester composites." Wear. 268 (11-12), pp. 1354-1370. https://doi.org/10.1016/j.wear.2010.02.004Article
The effects of alkali treatment on the interfacial adhesion of bamboo fibres
Wong, K. J., Yousif, B. F. and Low, K. O.. 2010. "The effects of alkali treatment on the interfacial adhesion of bamboo fibres." Proceedings of the Institution of Mechanical Engineers Part L: Journal of Materials, Design and Applications. 224 (3), pp. 139-148. https://doi.org/10.1243/14644207JMDA304Article
Proceedings of the 2010 Southern Region Engineering Conference (SREC 2010)
Goh, Steven C. and Wang, Hao (ed.) 2010. Proceedings of the 2010 Southern Region Engineering Conference (SREC 2010). Toowoomba, Australia. Engineers Australia.Authored book
Output characteristics of 'Chapparu' brickwork
Abeysekera, Vasantha. 2010. "Output characteristics of 'Chapparu' brickwork." Engineer: Journal of the Institution of Engineers, Sri Lanka. 43 (4), pp. 57-74.Article
Advantages and disadvantages in using permeable concrete as a pavement construction material
Thorpe, David and Zhuge, Yan. 2010. "Advantages and disadvantages in using permeable concrete as a pavement construction material." Egbu, Charles and Lou, Eric (ed.) ARCOM 2010: 26th Annual Conference of the Association of Researchers in Construction Management. Leeds, United Kingdom 06 - 08 Sep 2010 Reading, UK.Paper
FRP-retrofitted URM walls under in-plane shear: review and assessment of available models
Zhuge, Y.. 2010. "FRP-retrofitted URM walls under in-plane shear: review and assessment of available models." Journal of Composites for Construction. 14 (6), pp. 743-753. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000135Article
Development of environmentally friendly and structural enhanced permeable concrete pavement material
Zhuge, Yan and Lian, Chunqi. 2009. "Development of environmentally friendly and structural enhanced permeable concrete pavement material." Thorpe, David, Zhuge, Yan and Rogers-Clark, Peter (ed.) 2009 Southern Region Engineering Conference (SREC 2009). Springfield, Australia 17 - 18 Oct 2009 Brisbane, Australia.Paper
Optimum mix design of enhanced permeable concrete: an experimental investigation
Lian, C. and Zhuge, Y.. 2010. "Optimum mix design of enhanced permeable concrete: an experimental investigation." Construction and Building Materials. 24 (12), pp. 2664-2671. https://doi.org/10.1016/j.conbuildmat.2010.04.057Article
A methodology to assure measurement data quality for key engineering materials
Su, Ying, Huang, Jinghua and Al-Hakim, Latif. 2010. "A methodology to assure measurement data quality for key engineering materials." Advanced Materials Research. 108-111 (1), pp. 972-978. https://doi.org/10.4028/www.scientific.net/AMR.108-111.972Article
Frictional and wear performance of polyester composites based on coir fibres
Yousif, B. F.. 2009. "Frictional and wear performance of polyester composites based on coir fibres." Proceedings of the Institution of Mechanical Engineers Part J: Journal of Engineering Tribology. 223 (1), pp. 51 -59. https://doi.org/10.1243/13506501JET455Article
Wear and frictional performance of betelnut fibre-reinforced polyester composite
Gill, N. Singh and Yousif, B. F.. 2009. "Wear and frictional performance of betelnut fibre-reinforced polyester composite." Proceedings of the Institution of Mechanical Engineers Part J: Journal of Engineering Tribology. 223 (2), pp. 183-194. https://doi.org/10.1243/13506501JET516Article
Fracture behaviour of glass fibre-reinforced polyester composite
Leonard, L. W. H., Wong, K. J., Low, K. O. and Yousif, B. F.. 2009. "Fracture behaviour of glass fibre-reinforced polyester composite." Proceedings of the Institution of Mechanical Engineers Part L: Journal of Materials, Design and Applications. 223 (2), pp. 83-89. https://doi.org/10.1243/14644207JMDA224Article
Factors affecting debonding of FRP (fiber-reinforced polymer) rehabilitated concrete beams
Hughes, Warren and Karunasena, Warna. 2004. "Factors affecting debonding of FRP (fiber-reinforced polymer) rehabilitated concrete beams." Choi, Chang-Koon, Kim, Sun-Hoon and Kwak, Hyo-Gyong (ed.) 3rd International Conference on Advances in Structural Engineering and Mechanics (ASEM 2004). Seoul, South Korea 02 - 04 Sep 2004 Ann Arbor, MI.Paper
Potential of kenaf fibres as reinforcement for tribological applications
Chin, C. W. and Yousif, B. F.. 2009. "Potential of kenaf fibres as reinforcement for tribological applications." Wear. 267 (9-10), pp. 1550-1557. https://doi.org/10.1016/j.wear.2009.06.002Article
Evaluation of the properties of raw materials and products of briquetting machine
Islam, Md Mainul, Ali, Md Nawsher and Mia, Sobahan. 2004. "Evaluation of the properties of raw materials and products of briquetting machine." Hossain, M. Imtiaz (ed.) 2nd BSME-ASME International Conference on Thermal Engineering. Dhaka, Bangladesh 02 - 04 Jan 2004 Dhaka, Bangladesh.Paper
Present status and future trends in production of semisolid materials
Wang, Hao. 2003. "Present status and future trends in production of semisolid materials." Tezhong Zhuzao Ji Youse Hejin (Special Casting and Nonferrous Alloys). 131, pp. 332-334.Article