FRP-retrofitted URM walls under in-plane shear: review and assessment of available models

Article

Zhuge, Y.. 2010. "FRP-retrofitted URM walls under in-plane shear: review and assessment of available models." Journal of Composites for Construction. 14 (6), pp. 743-753. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000135
Article Title

FRP-retrofitted URM walls under in-plane shear: review and assessment of available models

ERA Journal ID4221
Article CategoryArticle
Authors
AuthorZhuge, Y.
Journal TitleJournal of Composites for Construction
Journal Citation14 (6), pp. 743-753
Number of Pages11
Year2010
PublisherAmerican Society of Civil Engineers
Place of PublicationReston,VA. United States
ISSN1090-0268
1943-5614
Digital Object Identifier (DOI)https://doi.org/10.1061/(ASCE)CC.1943-5614.0000135
Abstract

In the last two decades, several seismic retrofitting techniques for masonry structures have been developed and practiced and fiber-reinforced polymer FRP material has been increasingly used owing to its high strength/stiffness to mass ratio and easy application.
Although much research has been carried out on FRP strengthening of unreinforced masonry URM structures, most of it has been experimental studies to investigate the effectiveness of retrofitting techniques rather than the development of a rational design model. In addition, more research has been conducted on FRP-retrofitted URM walls under out-of-plane loads where flexural behavior dominates,
the research on the shear strength of FRP-retrofitted URM walls has been limited. This paper presents a review of research in this area.
Existing retrofitting techniques are overviewed, followed by a detailed discussion of experimental results of failure modes as they are directly related to the design model. The available design models are then assessed based on a test database collected from the available literature. Limitations of each model are addressed.

KeywordsFRP retrofitting; unreinforced masonry; in-plane shear; design model
ANZSRC Field of Research 2020401699. Materials engineering not elsewhere classified
401001. Engineering design
400510. Structural engineering
Public Notes

Files associated with this item cannot be displayed due to copyright restrictions.

Byline AffiliationsFaculty of Engineering and Surveying
Permalink -

https://research.usq.edu.au/item/q0348/frp-retrofitted-urm-walls-under-in-plane-shear-review-and-assessment-of-available-models

Log in to edit
  • 1935
    total views
  • 8
    total downloads
  • 2
    views this month
  • 0
    downloads this month

Export as

Related outputs

Recyclable thermoplastic FRP bars for reinforced concrete structures: Current status and future opportunities
Zeng, Jun-Jie, Feng, Sheng-Zhao, Zhao, Bin, Wu, Feng-Yi, Zhuge, Yan and Wang, Hao. 2024. "Recyclable thermoplastic FRP bars for reinforced concrete structures: Current status and future opportunities." Composite Structures. 348. https://doi.org/10.1016/j.compstruct.2024.118438
Synergistic effects of fiber hybridization on the fracture toughness of seawater sea-sand concrete
Mashayekhi, Amirhesam, Hassanli, Reza, Zhuge, Yan, Ma, Xing, Chow, Christopher W.K., Bazli, Milad and Manalo, Allan. 2024. "Synergistic effects of fiber hybridization on the fracture toughness of seawater sea-sand concrete." Construction and Building Materials. 444. https://doi.org/10.1016/j.conbuildmat.2024.137845
Performance of GFRP-RC precast cap beam to column connections with epoxy-anchored reinforcement: a numerical study
El-Naqeeb, Mohamed H., Hassanli, Reza, Zhuge, Yan, Ma, Xing, Bazli, Milad and Manalo, Allan. 2024. "Performance of GFRP-RC precast cap beam to column connections with epoxy-anchored reinforcement: a numerical study." Archives of Civil and Mechanical Engineering. 24 (2). https://doi.org/10.1007/s43452-024-00946-1
Numerical investigation on the behaviour of socket connections in GFRP-reinforced precast concrete
El-Naqeeb, Mohamed H., Hassanli, Reza, Zhuge, Yan, Ma, Xing and Manalo, Allan. 2024. "Numerical investigation on the behaviour of socket connections in GFRP-reinforced precast concrete." Engineering Structures. 303. https://doi.org/10.1016/j.engstruct.2024.117489
Cyclic behaviour of an innovative cap beam to column pocketless connection in GFRP-RC precast structures
El-Naqeeb, Mohamed H., Ghanbari-Ghazijahani, Tohid, Gholampour, Aliakbar, Hassanli, Reza, Zhuge, Yan, Ma, Xing and Manalo, Allan. 2024. "Cyclic behaviour of an innovative cap beam to column pocketless connection in GFRP-RC precast structures." Structures. 61. https://doi.org/10.1016/j.istruc.2024.106003
Cyclic Behavior of Beam-Column Pocket Connections in GFRP-Reinforced Precast Concrete Assemblages
Ghanbari-Ghazijahani, Tohid, Hassanli, Reza, Manalo, Allan, Smith, Scott T., Vincent, Tom, Gravina, Rebecca and Zhuge, Yan. 2023. "Cyclic Behavior of Beam-Column Pocket Connections in GFRP-Reinforced Precast Concrete Assemblages." Journal of Composites for Construction. 27 (2). https://doi.org/10.1061/JCCOF2.CCENG-38
FRP jacket assembly for retrofitting concrete structures
Mohammed, Ali A., Manalo, Allan C., Maranan, Ginghis B., Zhuge, Yan and Pettigrew, John. 2017. "FRP jacket assembly for retrofitting concrete structures." 6th Asia-Pacific Conference on FRP in Structures (APFIS2017). Singapore 19 - 21 Jul 2017 Singapore.
Experimental and Theoretical Deflections of Hybrid Composite Sandwich Panel under Four-point Bending Load
Fajrin, J., Zhuge, Y., Wang, H. and Bullen, F.. 2017. "Experimental and Theoretical Deflections of Hybrid Composite Sandwich Panel under Four-point Bending Load." Civil Engineering Dimension. 19 (1), pp. 29-35. https://doi.org/10.9744/CED.19.1.29-35
The structural behavior of hybrid structural insulated panels under pure bending load
Fajrin, Jauhar, Zhuge, Yan, Bullen, Frank and Wang, Hao. 2017. "The structural behavior of hybrid structural insulated panels under pure bending load." International Journal of Technology. 8 (5), pp. 777-788. https://doi.org/10.14716/ijtech.v8i5.861
Flexural behaviour of hybrid sandwich panel with natural fiber composites as the intermediate layer
Fajrin, Jauhar, Zhuge, Yan, Bullen, Frank and Wang, Hao. 2016. "Flexural behaviour of hybrid sandwich panel with natural fiber composites as the intermediate layer." Journal of Mechanical Engineering and Sciences. 10 (2), pp. 1968-1983. https://doi.org/10.15282/jmes.10.2.2016.3.0187
Axial behaviour of precast concrete panels with hollow composite reinforcing systems
Al-Fakher, Usama, Manalo, Allan, Alajarmeh, Omar, Aravinthan, Thiru, Zhuge, Yan, Bai, Yu and Edoo, Azam. 2021. "Axial behaviour of precast concrete panels with hollow composite reinforcing systems." Structures. 32, pp. 76-86. https://doi.org/10.1016/j.istruc.2021.03.015
Shear behaviour of hollow precast concrete-composite structures
Al-Fakher, Usama, Manalo, Allan, Ferdous, Wahid, Alajarmeh, Omar, Aravinthan, Thiru, Zhuge, Yan, Bai, Yu and Edoo, Azam. 2021. "Shear behaviour of hollow precast concrete-composite structures." Materials and Structures. 54 (2), pp. 1-18. https://doi.org/10.1617/s11527-021-01618-9
Bending and Shear Behaviour of Waste Rubber Concrete-Filled FRP Tubes with External Flanges
Ferdous, Wahid, Manalo, Allan, Alajarmeh, Omar S., Zhuge, Yan, Mohammed, Ali A., Bai, Yu, Aravinthan, Thiru and Schubel, Peter. 2021. "Bending and Shear Behaviour of Waste Rubber Concrete-Filled FRP Tubes with External Flanges." Polymers. 13 (15), pp. 1-18. https://doi.org/10.3390/polym13152500
Bending behaviour of precast concrete slab with externally flanged hollow FRP tubes
Al-Fakher, Usama, Manalo, Allan, Ferdous, Wahid, Aravinthan, Thiru, Zhuge, Yan, Bai, Yu and Edoo, Azam. 2021. "Bending behaviour of precast concrete slab with externally flanged hollow FRP tubes." Engineering Structures. 241, pp. 1-10. https://doi.org/10.1016/j.engstruct.2021.112433
Connections in GFRP reinforced precast concrete frames
Hassanli, Reza, Vincent, Tom, Manalo, Allan, Smith, Scott T., Gholampour, Aliakbar, Gravina, Rebecca and Zhuge, Yan. 2021. "Connections in GFRP reinforced precast concrete frames." Composite Structures. 276, pp. 1-19. https://doi.org/10.1016/j.compstruct.2021.114540
Recycling of landfill wastes (tyres, plastics and glass) in construction – A review on global waste generation, performance, application and future opportunities
Ferdous, Wahid, Manalo, Allan, Siddique, Rafat, Mendis, Priyan, Zhuge, Yan, Wong, Hong S., Lokuge, Weena, Aravinthan, Thiru and Schubel, Peter. 2021. "Recycling of landfill wastes (tyres, plastics and glass) in construction – A review on global waste generation, performance, application and future opportunities." Resources, Conservation and Recycling. 173, pp. 1-13. https://doi.org/10.1016/j.resconrec.2021.105745
State-of-the-art of prefabricated FRP composite jackets for structural repair
Mohammed, Ali A., Manalo, Allan C., Ferdous, Wahid, Zhuge, Yan, Vijay, P. V., Alkinani, Ashraf Q. and Fam, Amir. 2020. "State-of-the-art of prefabricated FRP composite jackets for structural repair." Engineering Science and Technology, an International Journal. 23 (5), pp. 1244-1258. https://doi.org/10.1016/j.jestch.2020.02.006
Axial Behaviour of Damaged Concrete Columns Repaired with Novel Prefabricate FRP Jacket
Mohammed, Ali A., Manalo, Allan C., Alajarmeh, Omar, Zhuge, Yan and Pettigrew, John. 2021. "Axial Behaviour of Damaged Concrete Columns Repaired with Novel Prefabricate FRP Jacket." 10th International Conference on FRP Composites in Civil Engineering (CICE 2020/2021). Istanbul, Turkey 08 - 10 Dec 2021 Switzerland. Springer. https://doi.org/10.1007/978-3-030-88166-5_47
Experimental and numerical evaluations on the behaviour of structures repaired using prefabricated FRP composites jacket
Mohammed, Ali A., Manalo, Allan C., Ferdous, Wahid, Zhuge, Yan, Vijay, P.V. and Pettigrew, John. 2020. "Experimental and numerical evaluations on the behaviour of structures repaired using prefabricated FRP composites jacket." Engineering Structures. 210, pp. 1-10. https://doi.org/10.1016/j.engstruct.2020.110358
Effectiveness of a novel composite jacket in repairing damaged reinforced concrete structures subject to flexural loads
Mohammed, Ali A., Manalo, Allan C., Maranan, Ginghis B., Muttashar, Majid, Zhuge, Yan, Vijay, P. V. and Pettigrew, John. 2020. "Effectiveness of a novel composite jacket in repairing damaged reinforced concrete structures subject to flexural loads." Composite Structures. 233, pp. 1-15. https://doi.org/10.1016/j.compstruct.2019.111634
Behavior of Damaged Concrete Columns Repaired with Novel FRP Jacket
Mohammed, Ali A., Manalo, Allan C., Maranan, Ginghis B., Zhuge, Yan, Vijay, P. V. and Pettigrew, John. 2019. "Behavior of Damaged Concrete Columns Repaired with Novel FRP Jacket." Journal of Composites for Construction. 23 (3), pp. 1-14. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000942
Optimal design for epoxy polymer concrete based on mechanical properties and durability aspects
Ferdous, Wahid, Manalo, Allan, Wong, Hong S., Abousnina, Rajab, Alajarmeh, Omar S., Zhuge, Yan and Schubel, Peter. 2020. "Optimal design for epoxy polymer concrete based on mechanical properties and durability aspects." Construction and Building Materials. 232, pp. 1-13. https://doi.org/10.1016/j.conbuildmat.2019.117229
Comparative study on the behaviour of different infill materials for pre-fabricated fibre composite repair systems
Mohammed, Ali A., Manalo, Allan C., Maranan, Ginghis B., Zhuge, Yan and Vijay, P. V.. 2018. "Comparative study on the behaviour of different infill materials for pre-fabricated fibre composite repair systems." Construction and Building Materials. 172, pp. 770-780. https://doi.org/10.1016/j.conbuildmat.2018.04.025
Developing towards best natural fibre composite for structural applications—a review
Rasappagari, Muni R. R. and Zhuge, Y.. 2017. "Developing towards best natural fibre composite for structural applications—a review." Hong, Hao and Chunwei , Zhang (ed.) 24th Australasian Conference on the Mechanics of Structures and Materials (ACMSM24). Perth, Australia 06 - 09 Dec 2016 London, United Kingdom.
Evaluation of permeability of porous concrete
Lian, C., Zhuge, Y. and Beecham, S.. 2011. "Evaluation of permeability of porous concrete." Advanced Materials Research. 295-297, pp. 873-879. https://doi.org/10.4028/www.scientific.net/AMR.295-297.873
Shear capacity of a newly developed sustainable hybrid composite wall panel
Fajrin, Jauhar and Zhuge, Yan. 2014. "Shear capacity of a newly developed sustainable hybrid composite wall panel." Liu, Weiqing and Hota, Gangarao V. (ed.) Workshop on Global Innovations in Infrastructure with Advanced Composites (2014). Nanjing, China 30 Oct - 01 Nov 2014 China.
The impact of photocatalytic on degradation of poly aromatic hydrocarbons through permeable concrete
Bolt, J. R., Zhuge, Y. and Bullen, F.. 2014. "The impact of photocatalytic on degradation of poly aromatic hydrocarbons through permeable concrete." Smith, Scott T. (ed.) 23rd Australasian Conference on the Mechanics of Structures and Materials (ACMSM23). Byron Bay, Australia 09 - 12 Dec 2014 Australia.
Material properties and impact resistance of a new lightweight engineered cementitious composite
Zhuge, Yan, Shen, C. J., Lu, G.X., Hesse, G., Chen, S. and Ruan, D.. 2014. "Material properties and impact resistance of a new lightweight engineered cementitious composite." Smith, Scott. T. (ed.) 23rd Australasian Conference on the Mechanics of Structures and Materials (ACMSM23). Byron Bay, Australia 09 - 12 Dec 2014 Australia.
Flexural behavior of basalt fibre reinforced ferrocement composite
Chen, S., Zhuge, Yan, Lu, G. X. and Eising, D. R.. 2014. "Flexural behavior of basalt fibre reinforced ferrocement composite." Smith, Scott T. (ed.) 23rd Australiasian Conference on the Mechanics of Structures and Materials (ACMSM 23). Byron Bay, Australia 09 - 12 Dec 2014 Australia.
Local buckling of profiled skin sheets resting on tensionless elastic foundation under in-plane shear loading
Dong, Jianghui, Zhuge, Yan, Mills, Julie E. and Ma, Xing. 2016. "Local buckling of profiled skin sheets resting on tensionless elastic foundation under in-plane shear loading." European Journal of Mechanics A: Solids. 58 (July-August), pp. 131-139. https://doi.org/10.1016/j.euromechsol.2016.01.008
Local buckling of profiled skin sheets resting on tensionless elastic foundations under uniaxial compression
Dong, Jianghui, Zhuge, Yan, Mills, Julie E. and Ma, Xing. 2016. "Local buckling of profiled skin sheets resting on tensionless elastic foundations under uniaxial compression." Thin-Walled Structures. 103, pp. 81-89. https://doi.org/10.1016/j.tws.2016.02.009
Improving the quality of experimental research in civil engineering by employing statistical design of experiment: a case study in developing composite hybrid sandwich panel
Fajrin, Jauhar, Zhuge, Yan, Bullen, Frank and Wang, Hao. 2015. "Improving the quality of experimental research in civil engineering by employing statistical design of experiment: a case study in developing composite hybrid sandwich panel." Zulkifli, Fitri Yuli and Suwartha, Nyoman (ed.) 14th International conference on QIR (Quality in Research). Lombok, Indonesia 10 - 13 Aug 2015 Lombok, Indonesia.
Flexural behaviour of a sustainable hybrid composite panel using natural fibres
Fajrin, Jauhar and Zhuge, Yan. 2015. "Flexural behaviour of a sustainable hybrid composite panel using natural fibres." Wu, Zhishen, Wu, Gang and Wang, Xin (ed.) The 12th International Symposium on Fibre Reinforced Polymers for Reinforced Concrete Structures (FRPRCS-12) & The 5th Asia-Pacific Conference on Fibre Reinforced Polymers in Structures (APFIS-2015). Nanjing, China 14 - 16 Dec 2015 Nanjing, China.
Strength and drift capacity of squat recycled concrete shear walls under cyclic loading
Peng, Youkai, Wu, Hui and Zhuge, Yan. 2015. "Strength and drift capacity of squat recycled concrete shear walls under cyclic loading." Engineering Structures. 100, pp. 356-368. https://doi.org/10.1016/j.engstruct.2015.06.025
The performance of recycled and quarry aggregates and their effect on permeable concrete
Zhuge, Yan. 2013. "The performance of recycled and quarry aggregates and their effect on permeable concrete." Dao, Vinh and Dux, Peter (ed.) Concrete Institute of Australia's Biennial National Conference (Concrete 2013): Understanding Concrete. Gold Coast, Australia 16 - 18 Oct 2013 Sydney, Australia.
Influencing factors and new developments of fly ash based geopolymer
Chen, Si, Zhuge, Yan and Xu, Deping. 2014. "Influencing factors and new developments of fly ash based geopolymer." Advanced Materials Research. 831, pp. 62-66. https://doi.org/10.4028/www.scientific.net/AMR.831.62
Hybrid sandwich panel with natural fibre composite intermediate layer: manufacturing process and significance analysis
Fajrin, Jauhar, Zhuge, Yan, Bullen, Frank and Wang, Hao. 2013. "Hybrid sandwich panel with natural fibre composite intermediate layer: manufacturing process and significance analysis." Malaysian Journal of Civil Engineering. 25 (Special issue 1), pp. 95-111.
Significance analysis of flexural behaviour of hybrid sandwich panels
Fajrin, Jauhar, Zhuge, Yan, Bullen, Frank and Wang, Hao. 2013. "Significance analysis of flexural behaviour of hybrid sandwich panels." Open Journal of Civil Engineering. 3 (3B), pp. 1-7. https://doi.org/10.4236/ojce.2013.33B001
Clogging mechanism of permeable concrete: A review
Mishra, Krishna, Zhuge, Yan and Karunasena, Karu. 2013. "Clogging mechanism of permeable concrete: A review." Dao, Vinh and Dux, Peter (ed.) Concrete Institute of Australia's Biennial National Conference (Concrete 2013): Understanding Concrete. Gold Coast, Australia 16 - 18 Oct 2013 Sydney, Australia.
Multi-objective design optimisation of GFRP sandwich beams
Awad, Z. K., Aravinthan, T., Zhuge, Y. and Gonzalez, F.. 2013. "Multi-objective design optimisation of GFRP sandwich beams." Samali, Bijan, Attard, Mario M. and Song, Chongmin (ed.) 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM22). Sydney, Australia 11 - 14 Dec 2012 London, United Kingdom.
A mathematical model for complete stress-strain curve prediction of permeable concrete
Hussin, M. K., Zhuge, Y., Bullen, F. and Lokuge, W. P.. 2013. "A mathematical model for complete stress-strain curve prediction of permeable concrete." Samali, Bijan, Attard, Mario M. and Song, Chongmin (ed.) 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM22). Sydney, Australia 11 - 14 Dec 2012 London, United Kingdom.
Geometry and restraint effects on the bending behaviour of the glass fibre reinforced polymer sandwich slabs under point load
Awad, Ziad K., Aravinthan, Thiru, Zhuge, Yan and Manalo, Allan. 2013. "Geometry and restraint effects on the bending behaviour of the glass fibre reinforced polymer sandwich slabs under point load." Materials and Design. 45, pp. 125-134. https://doi.org/10.1016/j.matdes.2012.08.072
A Markov chain Monte Carlo technique based optimal mix design of porous concrete
Jin, Lu and Zhuge, Yan. 2013. "A Markov chain Monte Carlo technique based optimal mix design of porous concrete." Applied Mechanics and Materials. 357-360, pp. 959-962. https://doi.org/10.4028/www.scientific.net/AMM.357-360.959
The effectiveness of team project work for distance education students
Zhuge, Yan, Brodie, Lyn and Mills, Julie. 2012. "The effectiveness of team project work for distance education students." Campbell, Duncan, Hugo, Ron and Dawes, Les (ed.) 8th International CDIO Conference (Conceive Design Implement Operate 2012). Brisbane, Australia 01 - 04 Jul 2012 Brisbane, Australia.
A review of aerogels and their application as a multi-functional building material
Zhuge, Yan. 2013. "A review of aerogels and their application as a multi-functional building material." Applied Mechanics and Materials. 253-255, pp. 564-567. https://doi.org/10.4028/www.scientific.net/AMM.253-255.564
Experimental study on multi-panel retrofitted steel transmission towers
Mills, Julie E., Ma, Xing and Zhuge, Yan. 2012. "Experimental study on multi-panel retrofitted steel transmission towers." Journal of Constructional Steel Research. 78, pp. 58-67. https://doi.org/10.1016/j.jcsr.2012.06.004
Modelling of steel lattice tower angle legs reinforced for increased load capacity
Zhuge, Yan, Mills, Julie E. and Ma, Xing. 2012. "Modelling of steel lattice tower angle legs reinforced for increased load capacity." Engineering Structures. 43, pp. 160-168. https://doi.org/10.1016/j.engstruct.2012.05.017
Investigation of the free vibration behaviour of an innovative GFRP sandwich floor panel
Awad, Ziad K., Aravinthan, Thiru and Zhuge, Yan. 2012. "Investigation of the free vibration behaviour of an innovative GFRP sandwich floor panel." Construction and Building Materials. 37, pp. 209-219. https://doi.org/10.1016/j.conbuildmat.2012.07.039
Investigation of some fundamental properties of permeable concrete
Hussin, Manal, Zhuge, Yan, Bullen, Frank and Lokuge, Weena. 2012. "Investigation of some fundamental properties of permeable concrete." International Conference on Emerging Materials and Mechanics Applications (ICEMMA 2012):. Hangzhou, China 05 - 06 Feb 2012 Zurich, Switzerland. https://doi.org/10.4028/www.scientific.net/AMR.487.869
New concept for optimal application of natural fibre reinforced plastic (NFRP) in building construction
Fajrin, Jauhar, Zhuge, Yan, Bullen, Frank and Wang, Hao. 2012. "New concept for optimal application of natural fibre reinforced plastic (NFRP) in building construction ." Noor, Norhazilan and Ismail, Mohammad (ed.) 8th Asia Pacific Structural Engineering and Construction Conference and 1st International Conference on Civil Engineering Research (APSEC-ICCER 2012): Sustaining the World with Better Structures and Construction Practice. Surabaya, Indonesia 02 - 04 Oct 2012 Johor, Malaysia.
Numerical and comparative study of earthquake intensity indices in seismic analysis
Ye, Lieping, Ma, Qianli, Miao, Zhiwei, Guan, Hong and Zhuge, Yan. 2013. "Numerical and comparative study of earthquake intensity indices in seismic analysis." The Structural Design of Tall and Special Buildings. 22 (4), pp. 362-381. https://doi.org/10.1002/tal.693
A force method model for static analysis of transmission line system subjected to in-plane and out-of-plane loadings
Ma, Xing, Mills, Julie E., Brown, Graham and Zhuge, Yan. 2012. "A force method model for static analysis of transmission line system subjected to in-plane and out-of-plane loadings." Advanced Materials Research. 368-373, pp. 3535-3538. https://doi.org/10.4028/www.scientific.net/AMR.368-373.3535
Laboratory evaluation of the stress-strain relationship of permeable concrete
Hussin, Manal, Zhuge, Yan, Bullen, Frank and Lokuge, Weena. 2011. "Laboratory evaluation of the stress-strain relationship of permeable concrete." Advanced Materials Research. 243-24, pp. 3259-3262. https://doi.org/10.4028/www.scientific.net/AMR.243-249.3259
The implementation of statistical inference to study the bending strength of sustainable hybrid sandwich panel composite
Fajrin, Jauhar, Zhuge, Yan, Bullen, Frank and Wang, Hao. 2011. "The implementation of statistical inference to study the bending strength of sustainable hybrid sandwich panel composite." Advanced Materials Research. 250-253, pp. 956-961. https://doi.org/10.4028/www.scientific.net/AMR.250-253.956
Experimental and numerical analysis of an innovative GFRP sandwich floor panel under point load
Awad, Ziad K., Aravinthan, Thiru and Zhuge, Yan. 2012. "Experimental and numerical analysis of an innovative GFRP sandwich floor panel under point load." Engineering Structures. 41, pp. 126-135. https://doi.org/10.1016/j.engstruct.2012.03.023
Photocatalytic construction materials: an overview of recent developments and their application to permeable concrete
Bolt, J. R., Zhuge, Y. and Bullen, F.. 2011. "Photocatalytic construction materials: an overview of recent developments and their application to permeable concrete." Fragomeni, Sam, Venkatesan, Srikanth, Lam, Nelson T. K. and Setunge, Sujeeva (ed.) 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM 21). Melbourne, Australia 07 - 10 Dec 2010 Leiden, Netherlands. https://doi.org/10.1201/b10571-149
Modelling of multi-panel transmission tower retrofitted with leg reinforcement
Zhuge, Y. and Mills, J.. 2011. "Modelling of multi-panel transmission tower retrofitted with leg reinforcement." Fragomeni, Sam, Venkatesan, Srikanth, Lam, Nelson T. K. and Setunge, Sujeeva (ed.) 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM 21). Melbourne, Australia 07 - 10 Dec 2010 Leiden, Netherlands. https://doi.org/10.1201/b10571-122
Assessment of debonding failure models for FRP retrofitted URM structures
Zhuge, Y. and Yeap, K. X.. 2011. "Assessment of debonding failure models for FRP retrofitted URM structures." Fragomeni, Sam, Venkatesan, Srikanth, Lam, Nelson T. K. and Setunge, Sujeeva (ed.) 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM 21). Melbourne, Australia 07 - 10 Dec 2010 Leiden, Netherlands. https://doi.org/10.1201/b10571-97
Multi-objective design optimization of an innovative fibre composite sandwich panel for civil engineering applications
Awad, Z. K., Aravinthan, T., Zhuge, Y. and Gonzalez, F.. 2011. "Multi-objective design optimization of an innovative fibre composite sandwich panel for civil engineering applications." Fragomeni, Sam, Venkatesan, Srikanth, Lam, Nelson T. K. and Setunge, Sujeeva (ed.) 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM 21). Melbourne, Australia 07 - 10 Dec 2010 Leiden, Netherlands. https://doi.org/10.1201/b10571-145
Flexural strength of sandwich panel with lignocellulosic composites intermediate layer: a statistic approach
Fajrin, Jauhar, Zhuge, Yan, Bullen, Frank and Wang, Hao. 2011. "Flexural strength of sandwich panel with lignocellulosic composites intermediate layer: a statistic approach." International Journal of Protective Structures. 2 (4), pp. 453-464. https://doi.org/10.1260/2041-4196.2.4.453
The effect of titanium dioxide addition on the hydraulic and mechanical properties of permeable concrete
Bolt, Jason, Zhuge, Yan and Bullen, Frank. 2011. "The effect of titanium dioxide addition on the hydraulic and mechanical properties of permeable concrete." Wyche, J. (ed.) 25th Biennial Conference of the Concrete Institute of Australia (Concrete 2011): Building a Sustainable Future. Perth, Australia 12 - 14 Oct 2011 Perth, Australia.
Numerical simulation of the mechanical behaviour of porous concrete
Lian, Chunqi, Zhuge, Yan and Beecham, Simon. 2011. "Numerical simulation of the mechanical behaviour of porous concrete." Engineering Computations: international journal for computer-aided engineering and software. 28 (8), pp. 984-1002. https://doi.org/10.1108/02644401111178992
The relationship between porosity and strength for porous concrete
Lian, C., Zhuge, Y. and Beecham, S.. 2011. "The relationship between porosity and strength for porous concrete ." Construction and Building Materials. 25 (11), pp. 4294-4298. https://doi.org/10.1016/j.conbuildmat.2011.05.005
The prediction of damage to masonry houses caused by foundation movements
Zhuge, Yan, Jin, Feng and Hunt, Suzanne P.. 2004. "The prediction of damage to masonry houses caused by foundation movements." Advances in Structural Engineering: an international journal. 7 (1), pp. 81-93. https://doi.org/10.1260/136943304322985783
Teaching finite element modelling at the undergraduate level: a PBL approach
Zhuge, Yan and Mills, Julie E.. 2009. "Teaching finite element modelling at the undergraduate level: a PBL approach." Kestell, Colin, Grainger, Steven and Cheung, John (ed.) 20th Annual Conference for the Australasian Association of Engineering Education (AAEE 2009). Adelaide, Australia 06 - 09 Dec 2009 Adelaide, Australia.
A review of optimization techniques used in the design of fibre composite structures for civil engineering applications
Awad, Ziad K., Aravinthan, Thiru, Zhuge, Yan and Gonzalez, Felipe. 2012. "A review of optimization techniques used in the design of fibre composite structures for civil engineering applications." Materials and Design. 33 (1), pp. 534-544. https://doi.org/10.1016/j.matdes.2011.04.061
Investigation of the effect of various additives on the strength of environmentally friendly permeable concrete
Zhuge, Yan. 2010. "Investigation of the effect of various additives on the strength of environmentally friendly permeable concrete." Goh, Steven C. and Wang, Hao (ed.) 2010 Southern Region Engineering Conference (SREC 2010). Toowoomba, Australia 11 - 12 Nov 2010 Toowoomba, Australia.
Identifying the issues of team project work for distance education students: a case study in civil engineering
Zhuge, Yan and Mills, Julie E.. 2010. "Identifying the issues of team project work for distance education students: a case study in civil engineering." Gardner, Anne and Jolly, Lesley (ed.) 21st Annual Conference for the Australasian Association of Engineering Education (AAEE 2010). Sydney, Australia 05 - 08 Dec 2010 Sydney, Australia.
Debonding characteristics of masonry structures retrofitted with FRP
Zhuge, Yan and Yeap, Kai. 2009. "Debonding characteristics of masonry structures retrofitted with FRP." 17th Annual International Conference on Composites or Nano Engineering ICCE17. Honolulu, Hawaii, USA 26 Jul - 01 Aug 2009
Advantages and disadvantages in using permeable concrete as a pavement construction material
Thorpe, David and Zhuge, Yan. 2010. "Advantages and disadvantages in using permeable concrete as a pavement construction material." Egbu, Charles and Lou, Eric (ed.) ARCOM 2010: 26th Annual Conference of the Association of Researchers in Construction Management. Leeds, United Kingdom 06 - 08 Sep 2010 Reading, UK.
Development of environmentally friendly and structural enhanced permeable concrete pavement material
Zhuge, Yan and Lian, Chunqi. 2009. "Development of environmentally friendly and structural enhanced permeable concrete pavement material." Thorpe, David, Zhuge, Yan and Rogers-Clark, Peter (ed.) 2009 Southern Region Engineering Conference (SREC 2009). Springfield, Australia 17 - 18 Oct 2009 Brisbane, Australia.
Modelling pervious concrete under compression loading: a discrete element approach
Lian, C., Zhuge, Y. and Beecham, S.. 2011. "Modelling pervious concrete under compression loading: a discrete element approach." Advanced Materials Research. 168-170, pp. 1590-1600. https://doi.org/10.4028/www.scientific.net/AMR.168-170.1590
Optimum mix design of enhanced permeable concrete: an experimental investigation
Lian, C. and Zhuge, Y.. 2010. "Optimum mix design of enhanced permeable concrete: an experimental investigation." Construction and Building Materials. 24 (12), pp. 2664-2671. https://doi.org/10.1016/j.conbuildmat.2010.04.057
Investigation of the effect of aggregate on the performance of permeable concrete
Lian, Chunqi and Zhuge, Yan. 2009. "Investigation of the effect of aggregate on the performance of permeable concrete." Ghafoori, Nader (ed.) Challenges, opportunities, and solutions in structural engineering and construction. Leiden, Netherlands. Taylor & Francis (CRC Press) / Balkema. pp. 505-510
Investigation of frequency characteristics of GFRP/phenolic sandwich beams
Awad, Ziad K., Aravinthan, Thiru, Zhuge, Yan and Gonzalez, Felipe. 2010. "Investigation of frequency characteristics of GFRP/phenolic sandwich beams." Goh, Steven C. and Wang, Hao (ed.) 2010 Southern Region Engineering Conference (SREC 2010). Toowoomba, Australia 11 - 12 Nov 2010 Toowoomba, Australia.
Cost optimum design of structural fibre composite sandwich panel for flooring applications
Awad, Ziad K., Aravinthan, Thiru and Zhuge, Yan. 2011. "Cost optimum design of structural fibre composite sandwich panel for flooring applications." Ye, Lieping, Feng, Peng and Yue, Qingrui (ed.) 5th International Conference on FRP Composites in Civil Engineering (CICE 2010). Beijing, China 27 - 29 Sep 2010 Beijing, China.
Modelling of URM walls retrofitted with cable: a comparison between a basic mechanical model and distinct element method
Zhuge, Yan and Chuang, Shihwei. 2006. "Modelling of URM walls retrofitted with cable: a comparison between a basic mechanical model and distinct element method." Transactions of the Tianjin University. 12 (Supplement), pp. 171-176.
Distinct element modelling of unreinforced masonry wall under seismic loads with and without cable retrofitting
Zhuge, Yan. 2008. "Distinct element modelling of unreinforced masonry wall under seismic loads with and without cable retrofitting." Transactions of the Tianjin University. 14 (Supplement), pp. 471-475. https://doi.org/10.1007/s12209-008-0080-0
Numerical simulation of masonry shear panels with distinct element approach
Zhuge, Yan and Hunt, Suzanne P.. 2003. "Numerical simulation of masonry shear panels with distinct element approach ." Structural Engineering and Mechanics. 15 (4), pp. 477-493.
Experimental capacity assessment of cold-formed boxed stud and C stud wall systems used in Australian residential construction
Pham, Maria M., Mills, Julie E. and Zhuge, Yan. 2006. "Experimental capacity assessment of cold-formed boxed stud and C stud wall systems used in Australian residential construction." Journal of Structural Engineering. 132 (4), pp. 631-635. https://doi.org/10.1061/(ASCE)0733-9445(2006)132:4(631)
Seismic retrofitting of unreinforced masonry buildings - a literature review
Zhuge, Y. and Chuang, S. W.. 2005. "Seismic retrofitting of unreinforced masonry buildings - a literature review." Australian Journal of Structural Engineering. 6 (1), pp. 25-36.
Finite element analysis of fibre composite sandwich panel
Awad, Ziad K., Aravinthan, Thiru and Zhuge, Yan. 2009. "Finite element analysis of fibre composite sandwich panel." Thorpe, David, Zhuge, Yan and Rogers-Clark, Peter (ed.) 2009 Southern Region Engineering Conference (SREC 2009). Springfield, Australia 17 - 18 Oct 2009 Brisbane, Australia.