401703. Energy generation, conversion and storage (excl. chemical and electrical)
| Title | 401703. Energy generation, conversion and storage (excl. chemical and electrical) |
|---|---|
| Parent | 4017. Mechanical engineering |
Latest research outputs
Sort by Date Title
Mild combustion: the future for lean and clean combustion
Yusaf, Talal, Noor, M. M. and Wandel, Andrew P.. 2013. "Mild combustion: the future for lean and clean combustion." Ishak, Mahadzir and Rahman, Md. Mustafizur (ed.) 2nd International Conference of Mechanical Engineering Research (ICMER 2013). Pahang, Malaysia 01 - 03 Jul 2013 Pahang, Malaysia.Paper
Investigation of the effect of additives to natural gas on heavy-duty SI engine combustion characteristics
Gharehghani, A., Hosseini, R. and Yusaf, T.. 2013. "Investigation of the effect of additives to natural gas on heavy-duty SI engine combustion characteristics." Journal of Mechanical Engineering and Sciences. 5, pp. 677-687. https://doi.org/10.15282/jmes.5.2013.14.0065Article
Characterization of a diesel engine operating with a small proportion of methanol as a fuel additive in biodiesel blend
Mat Yasin, M. H., Yusaf, Talal, Mamat, R. and Yusop, A. Fitri. 2014. "Characterization of a diesel engine operating with a small proportion of methanol as a fuel additive in biodiesel blend." Applied Energy. 114, pp. 865-873. https://doi.org/10.1016/j.apenergy.2013.06.012Article
Experimental measurement of direct thermal radiation through single-layer square-cell plain woven screens
Hashempour, Javad, Sharifian, Ahmad and Billingsley, John. 2016. "Experimental measurement of direct thermal radiation through single-layer square-cell plain woven screens." Journal of Heat Transfer: Transactions of the ASME. 138 (1), pp. 012701-1-012701-6. https://doi.org/10.1115/1.4031110Article
Determination of drying characteristics of biomass residues to be used as a renewable fuel
Al Kassir, Awf, Yusaf, Talal, Al Karany, Raul Kassir and Hamawand, Ihsan. 2015. "Determination of drying characteristics of biomass residues to be used as a renewable fuel." Journal of Biotechnology. 208 (Supplement), pp. S15-S15. https://doi.org/10.1016/j.jbiotec.2015.06.034Article
Identification of burning and extinguishing behaviour in spray flames with spark ignition
Baayens, Jocelyn and Wandel, Andrew P.. 2015. "Identification of burning and extinguishing behaviour in spray flames with spark ignition." Yang, Yi and Smith, Nigel (ed.) Australian Combustion Symposium 2015. Melbourne, Australia 07 - 09 Dec 2015 Australia.Paper
Single-zone zero-dimensional model study for diesel-fuelled homogeneous charge compression ignition (HCCI) engines using Cantera
Hairuddin, A. Aziz, Yusaf, Talal and Wandel, Andrew P.. 2016. "Single-zone zero-dimensional model study for diesel-fuelled homogeneous charge compression ignition (HCCI) engines using Cantera." International Journal of Automotive and Mechanical Engineering. 13 (2), pp. 3309-3328. https://doi.org/10.15282/ijame.13.2.2016.3.0275Article
Strained graphitic carbon nitride for hydrogen purification
de Silva, S. W., Du, A., Senadeera, W. and Gu, Y.. 2017. "Strained graphitic carbon nitride for hydrogen purification." Journal of Membrane Science. 528, pp. 201-205. https://doi.org/10.1016/j.memsci.2017.01.034Article
An artificial neutral network (ANN) model for predicting biodiesel kinetic viscosity as a function of temperature and chemical compositions
Jahirul, M. L., Senadeera, W., Brooks, P., Brown, R. J., Situ, R., Pham, P. X. and Masri, A. R.. 2013. "An artificial neutral network (ANN) model for predicting biodiesel kinetic viscosity as a function of temperature and chemical compositions." Piantadosi, J., Anderssen, R. S. and Boland, J. (ed.) 20th International Congress on Modelling and Simulation (MODSIM2013). Adelaide, Australia 01 - 06 Dec 2013 Australia. Modelling and Simulation Society of Australia and New Zealand . https://doi.org/10.36334/modsim.2013.G6.jahirulPaper
Optimisation of bio-oil extraction process from Beauty Leaf (Calophyllum inophyllum) oil seed as a second generation biodiesel source
Jahirul, M. I., Brown, J. R., Senadeera, W., Aswath, N., Laing, C., Leski-Taylor, J. and Rasul, M. G.. 2013. "Optimisation of bio-oil extraction process from Beauty Leaf (Calophyllum inophyllum) oil seed as a second generation biodiesel source." Procedia Engineering. 56, pp. 619-624. https://doi.org/10.1016/j.proeng.2013.03.168Article
Physio-chemical assessment of beauty leaf (Calophyllum inophyllum)as second-generation biodiesel feedstock
Jahirul, M. I., Brown, R. J., Senadeera, W., Ashwath, N., Rasul, M. G., Rahman, M. M., Hossain, Farhad M., Moghaddam, Lalehvash, Islam, M. A. and O'Hara, I. M.. 2015. "Physio-chemical assessment of beauty leaf (Calophyllum inophyllum)as second-generation biodiesel feedstock." Energy Reports. 1, pp. 204-215. https://doi.org/10.1016/j.egyr.2015.10.003Article
Estimation of biodiesel properties from chemical composition – an artificial neural network (ANN) approach
Jahirul, M. I., Senadeera, W., Brown, R. J. and Moghaddam, L.. 2014. "Estimation of biodiesel properties from chemical composition – an artificial neural network (ANN) approach." International Scientific Journal of Environmental Science. 3 (3), pp. 1-7.Article
The use of artificial neural networks for identifying sustainable biodiesel feedstocks
Jahirul, Mohammed I., Brown, Richard J., Senadeera, Wijitha, O'Hara, Ian M. and Ristovski, Zoran D.. 2013. "The use of artificial neural networks for identifying sustainable biodiesel feedstocks." Energies. 6 (8), pp. 3764-3806. https://doi.org/10.3390/en6083764Article
Biodiesel production from non-edible beauty leaf (Calophyllum inophyllum) oil: process pptimization using response surface methodology (RSM)
Jahirul, Mohammad I., Koh, Wenyong, Brown, Richard J., Senadeera, Wijitha, O'Hara, Ian and Moghaddam, Lalehvash. 2014. "Biodiesel production from non-edible beauty leaf (Calophyllum inophyllum) oil: process pptimization using response surface methodology (RSM)." Energies. 7 (8), pp. 5317-5331. https://doi.org/10.3390/en7085317Article
Pre-sodiated nickel cobaltite for high-performance sodium-ion capacitors
Yang, Dongfang, Sun, Xiaoming, Lim, Kyungmi, Gaddam, Rohit Ranganathan., Kumar, Nanjundan Ashok, Kang, Kisuk and Zhao, X. S.. 2017. "Pre-sodiated nickel cobaltite for high-performance sodium-ion capacitors." Journal of Power Sources. 362, pp. 358-365. https://doi.org/10.1016/j.jpowsour.2017.07.053Article
Numerical simulation of three dimensional turbulent flow structure and heat transfer in ribbed-straight, divergent and convergent ducts
Etminan, Amin, Harun, Zambri and Sharifian, Ahmad. 2016. "Numerical simulation of three dimensional turbulent flow structure and heat transfer in ribbed-straight, divergent and convergent ducts." International Journal of Mechanics. 10, pp. 362-367.Article
Mixing layer effects on the entrainment ratio in steam ejectors through ideal gas computational simulations
Ariafar, Kavous, Buttsworth, David, Al-Doori, Ghassan and Sharifi, Navid. 2016. "Mixing layer effects on the entrainment ratio in steam ejectors through ideal gas computational simulations." Energy. 95, pp. 380-392. https://doi.org/10.1016/j.energy.2015.12.027Article
Optimization of performance and exhaust emission parameters of a SI (spark ignition) engine with gasoline-ethanol blended fuels using response surface methodology
Najafi, Gholamhassan, Ghobadian, Barat, Yusaf, Talal, Ardebili, Seyed Mohammad Safieddin and Mamat, Rizalman. 2015. "Optimization of performance and exhaust emission parameters of a SI (spark ignition) engine with gasoline-ethanol blended fuels using response surface methodology." Energy. 90 (2), pp. 1815-1829. https://doi.org/10.1016/j.energy.2015.07.004Article
An experimental study on reactivity controlled compression ignition engine fueled with biodiesel/natural gas
Gharehghani, Ayatallah, Hosseini, Reza, Mirsalim, Mostafa, Jazayeri, S. Ali and Yusaf, Talal. 2015. "An experimental study on reactivity controlled compression ignition engine fueled with biodiesel/natural gas." Energy. 89, pp. 558-567. https://doi.org/10.1016/j.energy.2015.06.014Article
A comparative study on the first and second law analysis and performance characteristics of a spark ignition engine using either natural gas or gasoline
Gharehghani, A., Hosseini, R., Mirsalim, M. and Yusaf, Talal F.. 2015. "A comparative study on the first and second law analysis and performance characteristics of a spark ignition engine using either natural gas or gasoline." Fuel: the science and technology of fuel and energy. 158, pp. 488-493. https://doi.org/10.1016/j.fuel.2015.05.067Article
Effect of mixing on the performance of wet steam ejectors
Ariafar, Kavous, Buttsworth, David, Al-Doori, Ghassan and Malpress, Ray. 2015. "Effect of mixing on the performance of wet steam ejectors." Energy. 93 (2), pp. 2030-2041. https://doi.org/10.1016/j.energy.2015.10.082Article
Power and velocity control of wind turbines by adaptive fuzzy controller during full load operation
Habibi, H., Koma, A. Yousefi and Sharifian, A.. 2016. "Power and velocity control of wind turbines by adaptive fuzzy controller during full load operation." Iranian Journal of Fuzzy Systems. 13 (3), pp. 35-48.Article
A computational study of operating range extension in a natural gas SI engine with the use of hydrogen
Gharehghani, A., Hosseini, R., Mirsalim, M. and Yusaf, Talal F.. 2015. "A computational study of operating range extension in a natural gas SI engine with the use of hydrogen." International Journal of Hydrogen Energy. 40 (17), pp. 5966-5975. https://doi.org/10.1016/j.ijhydene.2015.03.015Article
Data on the construction of a mathmatical model to test the optimisation of the air gap spacing in a solar water heater with double glass cover ANSYS 13.0-Fluent software files.
Mossad, Ruth. 2016. Data on the construction of a mathmatical model to test the optimisation of the air gap spacing in a solar water heater with double glass cover ANSYS 13.0-Fluent software files. Toowoomba. University of Southern Queensland. https://doi.org/10.26192/q37yyDataset
Alternative energy sources for cotton production in Australia
Chen, Guangnan, Sandell, Gary and Baillie, Craig. 2014. "Alternative energy sources for cotton production in Australia." 18th World Congress of the International Commission of Agriculture and Biosystems Engineering (CIGR 2014): Upgrading the Quality of our Life. Beijing, China 16 - 19 Sep 2014 Kyoto, Japan.Paper
Engine performance and emissions using Jatropha curcas, Ceiba pentandra and Calophyllum inophyllum biodiesel in a CI diesel engine
Ong, Hwai Chyuan, Masjuki, H. H., Mahlia, T. M. I., Silitonga, A. S., Chong, W. T. and Yusaf, Talal. 2014. "Engine performance and emissions using Jatropha curcas, Ceiba pentandra and Calophyllum inophyllum biodiesel in a CI diesel engine." Energy. 69, pp. 427-445. https://doi.org/10.1016/j.energy.2014.03.035Article
An introduction to a homogeneous charge compression ignition engine
Hairuddin, A. A., Wandel, A. P. and Yusaf, T.. 2014. "An introduction to a homogeneous charge compression ignition engine." Journal of Mechanical Engineering and Sciences. 7, pp. 1042-1052. https://doi.org/10.15282/jmes.7.2014.3.0101Article
Statistical diagnosis of the best weibull methods for wind power assessment for agricultural applications
Azad, Abul Kalam, Rasul, Mohammad Golam and Yusaf, Talal. 2014. "Statistical diagnosis of the best weibull methods for wind power assessment for agricultural applications." Energies. 7 (5), pp. 3056-3085. https://doi.org/10.3390/en7053056Article
Energy characterisation of ultrasonic systems for industrial processes
Al-Juboori, Raed A., Yusaf, Talal, Bowtell, Leslie and Aravinthan, Vasantha. 2015. "Energy characterisation of ultrasonic systems for industrial processes." Ultrasonics. 57, pp. 18-30. https://doi.org/10.1016/j.ultras.2014.10.003Article
Anaerobic digestion process and bio-energy in meat industry: a review and a potential
Hamawand, Ihsan. 2015. "Anaerobic digestion process and bio-energy in meat industry: a review and a potential." Renewable and Sustainable Energy Reviews. 44, pp. 37-51. https://doi.org/10.1016/j.rser.2014.12.009Article
The production of biofuel and bioelectricity associated with wastewater treatment by green algae
Maity, Jyoti Prakash, Hou, Chia-Peng, Majumder, Dip, Bundschuh, Jochen, Kulp, Thomas R., Chen, Chien-Yen, Chuang, Lu-Te, Nathan Chen, Ching-Nen, Jean, Jiin-Shuh, Yang, Tsui-Chu and Chen, Chien-Cheng. 2014. "The production of biofuel and bioelectricity associated with wastewater treatment by green algae." Energy. 78, pp. 94-103. https://doi.org/10.1016/j.energy.2014.06.023Article
Coals seam gas (CSG) in agriculture - a review: technical and market analysis for Australia
Yusaf, Talal, Hamawand, Ihsan, Schmidt, Erik, Binnie, James, Rees, Steven and Chakrabarty, Sayan. 2014. "Coals seam gas (CSG) in agriculture - a review: technical and market analysis for Australia ." Sustainable Energy Technologies and Assessments. 8, pp. 149-158. https://doi.org/10.1016/j.seta.2014.08.005Article
Experimental and numerical study of MILD combustion in an open-end furnace with exhaust gas recirculation using methane and biogas
Noor, Muhamad Mat. 2015. Experimental and numerical study of MILD combustion in an open-end furnace with exhaust gas recirculation using methane and biogas. PhD Thesis Doctor of Philosophy. University of Southern Queensland.PhD Thesis
Inducing Swirl Flow within Stationary Cylindrical Split Channel
Al-Atresh, Safia R.. 2015. Inducing Swirl Flow within Stationary Cylindrical Split Channel. PhD Thesis Doctor of Philosophy. University of Southern Queensland.PhD Thesis
Air fuel ratio study for mixture of biogas and hydrogen on mild combustion
Noor, M. M., Wandel, Andrew P. and Yusaf, Talal. 2014. "Air fuel ratio study for mixture of biogas and hydrogen on mild combustion." International Journal of Automotive and Mechanical Engineering. 10 (1), pp. 2144-2154. https://doi.org/10.15282/ijame.9.2013.29.0180Article
Effect of air-fuel ratio on temperature distribution and pollutants for biogas MILD combustion
Noor, M. M., Wandel, Andrew P. and Yusaf, Talal. 2014. "Effect of air-fuel ratio on temperature distribution and pollutants for biogas MILD combustion." International Journal of Automotive and Mechanical Engineering. 10 (1), pp. 1980-1992. https://doi.org/10.15282/ijame.10.2014.15.0166Article
The simulation of biogas combustion in a MILD burner
Noor, M. M., Wandel, Andrew P. and Yusaf, Talal. 2014. "The simulation of biogas combustion in a MILD burner." Journal of Mechanical Engineering and Sciences. 6 (1), pp. 995-1013.Article
Extending SWER line capacity
Helwig, Andreas and Ahfock, Tony. 2013. "Extending SWER line capacity." 23rd Australasian Universities Power Engineering Conference (AUPEC 2013). Hobart, Australia 29 Sep - 03 Oct 2013 Piscataway, NJ. United States. https://doi.org/10.1109/AUPEC.2013.6725427Paper
A three-dimensional model for transient performance of a solid oxide fuel cell
Ho, Thinh X.. 2014. "A three-dimensional model for transient performance of a solid oxide fuel cell." International Journal of Hydrogen Energy. 39 (12), pp. 6680-6688. https://doi.org/10.1016/j.ijhydene.2014.01.207Article
Design and development of mild combustion burner
Noor, M. M., Wandel, Andrew P. and Yusaf, Talal. 2013. "Design and development of mild combustion burner." Journal of Mechanical Engineering and Sciences. 5, pp. 662-676. https://doi.org/10.15282/jmes.5.2013.13.0064Article