Physio-chemical assessment of beauty leaf (Calophyllum inophyllum)as second-generation biodiesel feedstock

Article


Jahirul, M. I., Brown, R. J., Senadeera, W., Ashwath, N., Rasul, M. G., Rahman, M. M., Hossain, Farhad M., Moghaddam, Lalehvash, Islam, M. A. and O'Hara, I. M.. 2015. "Physio-chemical assessment of beauty leaf (Calophyllum inophyllum)as second-generation biodiesel feedstock." Energy Reports. 1, pp. 204-215. https://doi.org/10.1016/j.egyr.2015.10.003
Article Title

Physio-chemical assessment of beauty leaf (Calophyllum inophyllum)as second-generation biodiesel feedstock

ERA Journal ID210412
Article CategoryArticle
AuthorsJahirul, M. I. (Author), Brown, R. J. (Author), Senadeera, W. (Author), Ashwath, N. (Author), Rasul, M. G. (Author), Rahman, M. M. (Author), Hossain, Farhad M. (Author), Moghaddam, Lalehvash (Author), Islam, M. A. (Author) and O'Hara, I. M. (Author)
Journal TitleEnergy Reports
Journal Citation1, pp. 204-215
Number of Pages12
Year2015
PublisherElsevier
Place of PublicationNetherlands
ISSN2352-4847
Digital Object Identifier (DOI)https://doi.org/10.1016/j.egyr.2015.10.003
Web Address (URL)http://www.sciencedirect.com/science/article/pii/S2352484715000335
Abstract

Recently, second-generation (non-vegetable oil) feedstocks for biodiesel production are receiving significant attention due to the cost and social effects connected with utilising food products for the production of energy products. The Beauty leaf tree (Calophyllum inophyllum) is a potential source of non-edible oil for producing second-generation biodiesel because of its suitability for production in an extensive variety of atmospheric condition, easy cultivation, high fruit production rate, and the high oil content in the seed. In this study, oil was extracted from Beauty leaf tree seeds through three different oil extraction methods. The important physical and chemical properties of these extracted Beauty leaf oils were experimentally analysed and compared with other commercially available vegetable oils. Biodiesel was produced using a two-stage esterification process combining of an acid catalysed pre-esterification process and an alkali catalysed transesterification process. Fatty acid methyl ester (FAME) profiles and important physicochemical properties were experimentally measured and estimated using equations based on the FAME analysis. The quality of Beauty leaf biodiesels was assessed and compared with commercially available biodiesels through multivariate data analysis using PROMETHEE-GAIA software. The results show that mechanical extraction using a screw press produces oil at a low cost, however,results in low oil yields compared with chemical oil extraction. High pressure and temperature in the extraction process increase oil extraction performance. On the contrary, this process increases the free fatty acid content in the oil. A clear difference was found in the physical properties of Beauty leaf oils,which eventually affected the oil to biodiesel conversion process.However, Beauty leaf oils methyl esters (biodiesel) were very consistent physicochemical properties and able to meet almost all indicators of biodiesel standards. Overall this study found that Beauty leaf is a suitable feedstock for producing second-generation biodiesel in commercial scale. Therefore, the findings of this study are expected to serve as the basis for further development of Beauty leaf as a feedstock for industrial scale second-generation biodiesel production.

Keywordsbeauty leaf, second generation, bio diesel
ANZSRC Field of Research 2020401703. Energy generation, conversion and storage (excl. chemical and electrical)
Public Notes

Files associated with this item cannot be displayed due to copyright restrictions.

Byline AffiliationsQueensland University of Technology
Central Queensland University
Institution of OriginUniversity of Southern Queensland
Permalink -

https://research.usq.edu.au/item/q3wxv/physio-chemical-assessment-of-beauty-leaf-calophyllum-inophyllum-as-second-generation-biodiesel-feedstock

  • 1425
    total views
  • 8
    total downloads
  • 5
    views this month
  • 0
    downloads this month

Export as

Related outputs

Application of Artificial Intelligence Techniques for Brain-Computer Interface in Mental Fatigue Detection: A Systematic Review (2011-2022)
Yaacob, Hamwira, Hossain, Farhad, Shari, Sharunizam, Khare, Smith K., Ooi, Chui Ping and Acharya, U. Rajendra. 2023. "Application of Artificial Intelligence Techniques for Brain-Computer Interface in Mental Fatigue Detection: A Systematic Review (2011-2022)." IEEE Access. 11, pp. 74736-74758. https://doi.org/10.1109/ACCESS.2023.3296382
Sorption characteristics of three different food particulates made from potato, beans and peas
Senadeera, Wijitha. 2023. "Sorption characteristics of three different food particulates made from potato, beans and peas ." Indian Journal of Engineering. 20 (53).
Effect of Commercial Level Modified Atmospheric Storage for Paddy (Oryza sativa)
Gunathilake, D. M. C. C. and Senadeera, W.. 2022. "Effect of Commercial Level Modified Atmospheric Storage for Paddy (Oryza sativa)." COJ Review and Research. 4 (1), pp. 1-5. https://doi.org/10.31031/COJRR.2022.04.000578
Micro structural approach of potato and pumpkin drying and rehydration
Adiletta, Giuseppina, Wijerathne, Chathura, Senadeera, Wijitha, Russo, Paola and Di Matteo, Marisa. 2022. "Micro structural approach of potato and pumpkin drying and rehydration." Indian Journal of Engineering. 19 (51), pp. 166-172.
Climate change adaptation responses among riparian settlements: A case study from Bangladesh
Filho, Walter Leal, Alam, G. M. Monirul, Nagy, Gustavo J., Rahman, Mohammad Mahbubur, Roy, Sajal, Wolf, Franziska, Kovaleva, Marina, Saroar, Mustafa and Li, Chunlan. 2022. "Climate change adaptation responses among riparian settlements: A case study from Bangladesh." PLoS One. 17 (12). https://doi.org/10.1371/journal.pone.0278605
Wastes to profit: a circular economy approach to value-addition in livestock industries
Ramirez, Jerome, McCabe, Bernadette, Jensen, Paul D., Speight, Robert, Harrison, Mark, van den Berg, Lisa and O'Hara, Ian. 2021. "Wastes to profit: a circular economy approach to value-addition in livestock industries." Animal Production Science. 61 (6), pp. 541-550. https://doi.org/10.1071/AN20400
Experimental Investigation of Plastic Deformation Characteristics of Welded Carbon Steel Pipe Subject to Lateral Impact Loading
Rennie, Matthew and Senadeera, Wijitha. 2021. "Experimental Investigation of Plastic Deformation Characteristics of Welded Carbon Steel Pipe Subject to Lateral Impact Loading." Indian Journal of Engineering. 18 (49), pp. 79-87.
Modelling 3-D cellular microfluidics of different plant cells for the prediction of cellular deformations under external mechanical compression: a SPH-CG-based computational study
Rathnayaka, C. M., Karunasena, H. C. P., Senadeera, W. and Gu, Y. T.. 2020. "Modelling 3-D cellular microfluidics of different plant cells for the prediction of cellular deformations under external mechanical compression: a SPH-CG-based computational study." Chanson, Hubert and Brown, Richard (ed.) 22nd Australasian Fluid Mechanics Conference (AFMC2020). Brisbane, Australia 07 - 10 Dec 2020 St Lucia, QLD, Australia. https://doi.org/10.14264/1374f47
Design and development of a laboratory scale fluidization column for experimentation through student internship program
Senadeera, Wijitha and Kosse, Vladis. 2021. "Design and development of a laboratory scale fluidization column for experimentation through student internship program." Indian Journal of Engineering. 18 (49), pp. 40-47.
Investigation of correlation between chemical composition and properties of biodiesel using principal component analysis (PCA) and artificial neural network (ANN)
Jahirul, M. I., Rasul, M. G., Brown, R. J., Senadeera, W, Hosen, M. A., Haque, R., Saha, S. C. and Mahlia, T. M. I.. 2021. "Investigation of correlation between chemical composition and properties of biodiesel using principal component analysis (PCA) and artificial neural network (ANN)." Renewable Energy. 168, pp. 632-646. https://doi.org/10.1016/j.renene.2020.12.078
The effect of abrasive pretreatment on the drying kinetics and phenolic compounds in goji berries (Lycium barbarum L.)
Russo, Paola, Adiletta, Giuseppina, Di Matteo, Marisa, Senadeera, Wijitha and Cinquanta, Luciano. 2020. "The effect of abrasive pretreatment on the drying kinetics and phenolic compounds in goji berries (Lycium barbarum L.)." Journal of Food Processing and Preservation. 44 (12). https://doi.org/10.1111/jfpp.14933
A three-dimensional (3-D) meshfree-based computational model to investigate stress strain-time relationships of plant cells during drying
Rathnayaka, C. M., Karunasena, H. C. P., Wijerathne, W. D. C. C., Senadeera, W. and Gu, Y. T.. 2020. "A three-dimensional (3-D) meshfree-based computational model to investigate stress strain-time relationships of plant cells during drying." PLoS One. 15 (7), pp. 1-28. https://doi.org/10.1371/journal.pone.0235712
Influence of different hot air drying temperatures on drying kinetics, shrinkage, and colour of persimmon slices
Senadeera, Wijitha, Adiletta, Giuseppina, Onal, Begum, Di Matteo, Marisa and Russo, Paola. 2020. "Influence of different hot air drying temperatures on drying kinetics, shrinkage, and colour of persimmon slices." Foods. 9 (101). https://doi.org/10.3390/foods9010101
Sustaining competencies and employability: A fishbone model for engineering education to fit the processes of life
Somasundaram, Jay, Rasul, Mohammad G. and Danaher, P. A.. 2019. "Sustaining competencies and employability: A fishbone model for engineering education to fit the processes of life." Journal of Institutional Research (South East Asia). 17 (1), pp. 216-229.
Pet food from bovine origin drying by green heat pump technology and fluidization
Alves-Filho, O., Senadeera, W. and Eikevik, T.. 2010. "Pet food from bovine origin drying by green heat pump technology and fluidization." Fito, Pedro and Toldra, Fidel (ed.) International Conference on Food Innovation: Food Innova 2010. Valencia, Spain 25 - 29 Oct 2010 Valencia, Spain.
Fluidization behaviour of food materials: effect of moisture and shape
Senadeera, Wijitha. 2008. "Fluidization behaviour of food materials: effect of moisture and shape." Ferreira, E. C. and Mota, M. (ed.) 10th International Chemical and Biological Engineering Conference (CHEMPOR 2008). Braga, Portugal 04 - 06 Sep 2008 Portugal.
Thermal transition properties of spaghetti measured by Differential Scanning Calorimetry (DSC) and Thermal Mechanical Compression Test (TMCT)
Rahman, Mohammad Shafiur, Senadeera, Wijitha, Al-Alawi, Ahmed, Truong, Tuyen, Bhandari, Bhesh and Al-Saidi, Ghalib. 2011. "Thermal transition properties of spaghetti measured by Differential Scanning Calorimetry (DSC) and Thermal Mechanical Compression Test (TMCT)." Food and Bioprocess Technology. 4 (8), pp. 1422-1431. https://doi.org/10.1007/s11947-009-0258-z
Density variation of different shaped food particulates in fluid bed drying: empirical models
Senadeera, Wiji. 2009. "Density variation of different shaped food particulates in fluid bed drying: empirical models." Journal of Agricultural and Marine Sciences. 14, pp. 27-34. https://doi.org/10.24200/jams.vol14iss0pp27-34
Minimum fluidization velocity of food materials: effect of moisture and shape
Senadeera, Wiji. 2009. "Minimum fluidization velocity of food materials: effect of moisture and shape." Chemical Product and Process Modeling. 4 (4), pp. 1-19. https://doi.org/10.2202/1934-2659.1283
A coarse-grained multiscale model to simulate morphological changes of food-plant tissues undergoing drying
Wijerathne, W. D. C. C., Rathnayaka, C. M., Karunasena, H. C. P., Senadeera, W., Sauret, E., Turner, I. W. and Gu, Y. T.. 2018. "A coarse-grained multiscale model to simulate morphological changes of food-plant tissues undergoing drying." Soft Matter. 15 (5), pp. 901-916. https://doi.org/10.1039/c8sm01593g
A 3-D coupled Smoothed Particle Hydrodynamics and Coarse-Grained model to simulate drying mechanisms of small cell aggregates A 3-D coupled Smoothed Particle Hydrodynamics and Coarse-Grained model to simulate drying mechanisms of small cell aggregates
Rathnayaka, C. M., Karunasena, H. C. P., Senadeera, W., Polwaththe-Gallage, H. N. and Gu, Y. T.. 2019. "A 3-D coupled Smoothed Particle Hydrodynamics and Coarse-Grained model to simulate drying mechanisms of small cell aggregates A 3-D coupled Smoothed Particle Hydrodynamics and Coarse-Grained model to simulate drying mechanisms of small cell aggregates." Applied Mathematical Modelling: simulation and computation for engineering and environmental systems. 67, pp. 219-233. https://doi.org/10.1016/j.apm.2018.09.037
Dehydration and rehydration characteristics of pretreated pumpkin slices
Adiletta, G., Wijerathne, C., Senadeera, W., Russo, P., Crescitelli, A. and Di Matteo, M.. 2018. "Dehydration and rehydration characteristics of pretreated pumpkin slices." Italian Journal of Food Science. 30 (4), pp. 684-706. https://doi.org/10.14674/IJFS-1176
A multiscale coarse grained model for simulating mechanical responses of plant food tissues
Wijerathne, W. D. C.C., Turner, I. W., Sauret, E, Karunasena, H. C. P., Senadeera, W and Gu, Y. T.. 2017. "A multiscale coarse grained model for simulating mechanical responses of plant food tissues." Liu, G. R., Han, Xu and Li, Zirui (ed.) 8th International Conference on Computational Methods (ICCM 2017). Guilin, China 25 - 29 Jul 2017 California, USA.
Microscale and multiscale computational modelling of morphological changes in plant cellular structure during drying with a coupled smoothed particle hydrodynamics and coarse-grained appraoch
Rathnayaka, C. M., Wijerathne, W. D. C. C., Karunasena, H. C. P., Senadeera, W. and Gu, Y. T.. 2017. "Microscale and multiscale computational modelling of morphological changes in plant cellular structure during drying with a coupled smoothed particle hydrodynamics and coarse-grained appraoch." Liu, Moubin, Han, Xu, Gu, Yuantong and Li, Zirui (ed.) Advances in computational engineering science (ACES). United States. ScienTech Publisher. pp. 1-10
Three-dimensional (3D) numerical modeling of morphogenesis in dehydrated fruits and vegetables
Rathnayaka, C. M., Karunasena, H. C. P., Senadeera, W., Guan, L. and Gu, Y. T.. 2018. "Three-dimensional (3D) numerical modeling of morphogenesis in dehydrated fruits and vegetables." Chen, Guangnan (ed.) Advances in agricultural machinery and technologies. Boca Raton, United States. CRC Press. pp. 431-454
Drying of agricultural crops
Gunathilake, D. M. C. C., Senanayaka, D. P., Adiletta, G. and Senadeera, Wiji. 2018. "Drying of agricultural crops." Chen, Guangnan (ed.) Advances in agricultural machinery and technologies. Boca Raton, United States. CRC Press. pp. 331-365
Application of a coupled smoothed particle hydrodynamics(SPH) and coarse-grained (CG) numerical modelling approach to study three-dimensional (3-D) deformations of single cells of different food-plant materials during drying [ArticleFirst]
Rathnayaka, C. M., Karunasena, H. C. P., Senadeera, W. and Gu, Y. T.. 2018. "Application of a coupled smoothed particle hydrodynamics(SPH) and coarse-grained (CG) numerical modelling approach to study three-dimensional (3-D) deformations of single cells of different food-plant materials during drying [ArticleFirst]." Soft Matter. 14 (11), pp. 2015-2031. https://doi.org/10.1039/c7sm01465a
Australian Journal of Mechanical Engineering
Yeoh, Guan Heng, Rasul, Mohammad G. and Goh, Steven. 2018. "Australian Journal of Mechanical Engineering ." Australian Journal of Mechanical Engineering. 16 (1), pp. 1-1. https://doi.org/10.1080/14484846.2018.1433590
A 3-D meshfree numerical model to analyze cellular scale shrinkage of different categories of fruits and vegetables during drying
Rathnayaka Mudiyanselage, C. M., Karunasena, H. C. P., Gu, Y. T., Guan, L., Banks, J. and Senadeera, W.. 2016. "A 3-D meshfree numerical model to analyze cellular scale shrinkage of different categories of fruits and vegetables during drying." 7th International Conference on Computational Methods (ICCM 2016). Berkeley, California 01 - 04 Aug 2016 California, USA.
Correlation between physiochemical properties and quality of biodiesel
Jahirul, M. I., Brown, R. J. and Senadeera, W.. 2018. "Correlation between physiochemical properties and quality of biodiesel." Khan, M. Masud. K., Chowdhury, Ashfaque Ahmed and Hassan, Nur M. Sayeed (ed.) Application of thermo-fluid processes in energy systems: key issues and recent developments for a sustainable future. Singapore. Springer. pp. 57-81
Numerical investigation on structural evolution and mechanical behaviour of amorphous silicon Li ion battery anodes
Sitinamaluwa, Hansinee, Wang, Mingchao, Will, Geoffrey, Senadeera, Wijitha, Ling, Ming, Zhang, Shanqing and Yan, Cheng. 2015. "Numerical investigation on structural evolution and mechanical behaviour of amorphous silicon Li ion battery anodes." 9th International Mesostructured Materials Symposium (IMMS-9). Brisbane, Australia 17 - 20 Aug 2015 Brisbane, Australia.
Structural transformations and mechanics of amorphous silicon anodes during initial lithian-delithiation cycle
Sitinamaluwa, Hansinee, Wang, Mingchao, Will, Geoffrey, Senadeera, Wijitha, Zhang, Shanqing and Yan, Cheng. 2016. "Structural transformations and mechanics of amorphous silicon anodes during initial lithian-delithiation cycle." Energy Future Conference 2016. Sydney, Australia 04 - 06 Jul 2016 Brisbane, Australia.
Application of 3D imaging and analysis techniques for the study of food plant cellular deformations during drying
Rathnayaka, C. M., Karunasena, H. C. P., Senadeera, W. and Gu, Y. T.. 2018. "Application of 3D imaging and analysis techniques for the study of food plant cellular deformations during drying." Drying Technology: an international journal. 36 (5), pp. 509-522. https://doi.org/10.1080/07373937.2017.1341417
Numerical modeling of morphological changes of food plant materials during drying
Karunasena, H. C. P. and Senadeera, Wijitha. 2017. "Numerical modeling of morphological changes of food plant materials during drying." Zhang, Min, Bhandari, Bhesh and Fang, Zhongxiang (ed.) Handbook of drying of vegetables and vegetable materials. Boca Raton, FL, United States. CRC Press. pp. 387-427
A meshfree three-dimensional (3-D) numerical model to study transport phenomena in single plant cells during drying
Rathnayaka Mudiyanselage, C. M., Karunasena, H. C. P., Gu, Y. T., Guan, L., Banks, J. and Senadeera, W.. 2016. "A meshfree three-dimensional (3-D) numerical model to study transport phenomena in single plant cells during drying." Steinberg, Theodore, Sauret, Emilie and Saha, Suvash (ed.) 10th Australasian Heat and Mass Transfer Conference (AHMT 2016). Brisbane, Australia 14 - 15 Jul 2016 Brisbane, Australia.
Simulation of dynamic behaviour of a biological wastewater treatment plant in South East Queensland, Australia using Bio-Win software
Moragaspitiya, Chathurani, Rajapakse, Jay, Senadeera, Wijitha and Ali, Imtiaj. 2017. "Simulation of dynamic behaviour of a biological wastewater treatment plant in South East Queensland, Australia using Bio-Win software." Engineering Journal. 21 (3), pp. 1-22. https://doi.org/10.4186/ej.2017.21.3.1
A coupled SPH-DEM model for fluid and solid mechanics of apple parenchyma cells during drying
Karunasena, H. C. P., Senadeera, W., Gu, Y. T. and Brown, R. J.. 2012. "A coupled SPH-DEM model for fluid and solid mechanics of apple parenchyma cells during drying." Brandner, P. A. and Pearce, B. W. (ed.) 18th Australasian Fluid Mechanics Conference (AFMC 2012). Launceston, Australia 03 - 07 Dec 2012 Melbourne, Australia.
Influence of atmospheric sublimation and evaporation on the heat pump fluid bed drying of bovine intestines
Senadeera, W., Alves-Filho, O. and Eikevik, T.. 2012. "Influence of atmospheric sublimation and evaporation on the heat pump fluid bed drying of bovine intestines." Drying Technology: an international journal. 30 (14), pp. 1583-1591. https://doi.org/10.1080/07373937.2012.699011
Innovative approaches to teaching engineering drawing at tertiary institutions
Kosse, Vladis and Senadeera, Wijitha. 2011. "Innovative approaches to teaching engineering drawing at tertiary institutions." International Journal of Mechanical Engineering Education. 39 (4), pp. 323-333. https://doi.org/10.7227/IJMEE.39.4.5
Hyperelastic constitutive relationship for the strain-rate dependent behavior of shoulder and other joint cartilages
Thibbotuwawa, N., Oloyede, A., Senadeera, W. and Gu, Y. T.. 2014. "Hyperelastic constitutive relationship for the strain-rate dependent behavior of shoulder and other joint cartilages." Goh, James (ed.) 15th International Conference on Biomedical Engineering (ICBME 2013). Singapore 04 - 07 Dec 2013 Heidelberg, Germany. https://doi.org/10.1007/978-3-319-02913-9_65
Model for internal porosity development of different shaped foods
Senadeera, Wijitha. 2014. "Model for internal porosity development of different shaped foods." Thilakarathne, B. M. K. S., Rathnayake, H. M. A. P., Champa, W. A. H. and Wasala, W. M. C. B. (ed.) International Research Symposium on Postharvest Technology 2014: Safe Food for Healthy Life. Anuradapura, Sri-Lanka 19 Jun 2014 Anuradapura, Sri-Lanka.
A novel approach for numerical simulation of plant tissue shrinkage during drying
Karunasena, H. C. P., Senadeera, W., Brown, R. J. and Gu, Y. T.. 2014. "A novel approach for numerical simulation of plant tissue shrinkage during drying." Thilakaratne, B. M. K. S., Rathnayake, H. M. A. P., Champa, W. A. H. and Wasala, W. M. C. B. (ed.) International Research Symposium on Postharvest Technology 2014: Safe Food for Healthy Life. Anuradapura, Sri-Lanka 19 Jun 2014 Anuradapura, Sri-Lanka.
Carbon-based silicon nanohybrid anode materials for rechargeable lithium ion batteries
Sitinamaluwa, Hansinee, Zhang, Shanqing, Senadeera, Wijitha, Will, Geoffrey and Yan, Cheng. 2016. "Carbon-based silicon nanohybrid anode materials for rechargeable lithium ion batteries." Materials Technology: Advanced Performance Materials. 31 (14), pp. 872-883. https://doi.org/10.1080/10667857.2015.1104824
Strained graphitic carbon nitride for hydrogen purification
de Silva, S. W., Du, A., Senadeera, W. and Gu, Y.. 2017. "Strained graphitic carbon nitride for hydrogen purification." Journal of Membrane Science. 528, pp. 201-205. https://doi.org/10.1016/j.memsci.2017.01.034
Drying characteristics and quality of grape under physical pretreatment
Adiletta, G., Russo, P., Senadeera, W. and Di Matteo, M.. 2016. "Drying characteristics and quality of grape under physical pretreatment." Journal of Food Engineering. 172, pp. 9-18. https://doi.org/10.1016/j.jfoodeng.2015.06.031
Lithium concentration dependent structure and mechanics of amorphous silicon
Sitinamaluwa, H. S., Wang, M. C., Will, G, Senadeera, W., Zhang, S. and Yan, C.. 2016. "Lithium concentration dependent structure and mechanics of amorphous silicon." Journal of Applied Physics. 119 (24), pp. 1-6. https://doi.org/10.1063/1.4954683
SPH-DEM approach to numerically simulate the deformation of three‑dimensional RBCs in non‑uniform capillaries
Polwaththe-Gallage, Hasitha-Nayanajith, Saha, Suvash C., Sauret, Emily, Flower, Robert, Senadeera, Wijitha and Gu, YuanTong. 2016. "SPH-DEM approach to numerically simulate the deformation of three‑dimensional RBCs in non‑uniform capillaries." BioMedical Engineering OnLine. 15 (2 (Supplement)), pp. 349-370. https://doi.org/10.1186/s12938-016-0256-0
Novel trends in numerical modelling of plant food tissues and their morphological changes during drying - a review
Rathnayaka Mudiyanselage, C. M., Karunasena, H. C. P., Gu, Y. T., Guan, L. and Senadeera, W.. 2017. "Novel trends in numerical modelling of plant food tissues and their morphological changes during drying - a review." Journal of Food Engineering. 194, pp. 24-39. https://doi.org/10.1016/j.jfoodeng.2016.09.002
A variable diffusivity model for the drying of spherical food particulates
Walker, Lauren and Senadeera, Wijitha. 2014. "A variable diffusivity model for the drying of spherical food particulates." Applied Mechanics and Materials. 553, pp. 94-99. https://doi.org/10.4028/www.scientific.net/AMM.553.94
Optimisation of bio-oil extraction process from Beauty Leaf (Calophyllum inophyllum) oil seed as a second generation biodiesel source
Jahirul, M. I., Brown, J. R., Senadeera, W., Aswath, N., Laing, C., Leski-Taylor, J. and Rasul, M. G.. 2013. "Optimisation of bio-oil extraction process from Beauty Leaf (Calophyllum inophyllum) oil seed as a second generation biodiesel source." Procedia Engineering. 56, pp. 619-624. https://doi.org/10.1016/j.proeng.2013.03.168
Influence of drying conditions on the moisture diffusion and fluidization quality during multi-stage fluidized bed drying of bovine intestine for pet food
Senadeera, W., Alves-Filho, O. and Eikevik, T.. 2013. "Influence of drying conditions on the moisture diffusion and fluidization quality during multi-stage fluidized bed drying of bovine intestine for pet food." Food and Bioproducts Processing. 91 (C4), pp. 549-557. https://doi.org/10.1016/j.fbp.2013.08.008
Simulation of plant cell shrinkage during drying – a SPH–DEM approach
Karunasena, H. C. P., Senadeera, W., Brown, R. J. and Gu, Y. T.. 2014. "Simulation of plant cell shrinkage during drying – a SPH–DEM approach." Engineering Analysis with Boundary Elements. 44, pp. 1-18. https://doi.org/10.1016/j.enganabound.2014.04.004
Neutral and charged boron-doped fullerenes for CO2 adsorption
de Silva, Suchitra W., Du, Aijun, Senadeera, Wijitha and Gu, YuanTong. 2014. "Neutral and charged boron-doped fullerenes for CO2 adsorption." Beilstein Journal of Nanotechnology. 5, pp. 413-418. https://doi.org/10.3762/bjnano.5.49
Drying kinetics, quality changes and shrinkage of two grape varieties of Italy
Senadeera, W., Adiletta, G., Di Matteo, M. and Russo, P.. 2014. "Drying kinetics, quality changes and shrinkage of two grape varieties of Italy." Applied Mechanics and Materials. 553, pp. 362-366. https://doi.org/10.4028/www.scientific.net/AMM.553.362
A coupled SPH-DEM model for micro-scale structural deformations of plant cells during drying
Karunasena, H. C. P., Senadeera, W., Gu, Y. T. and Brown, R. J.. 2014. "A coupled SPH-DEM model for micro-scale structural deformations of plant cells during drying." Applied Mathematical Modelling: simulation and computation for engineering and environmental systems. 38 (15-16), pp. 3781-3801. https://doi.org/10.1016/j.apm.2013.12.004
Physical mechanisms underlying the strain-rate-dependent mechanical behavior of kangaroo shoulder cartilage
Thibbotuwawa, Namal, Oloyede, Adekunle, Li, Tong, Singh, Sanjileena, Senadeera, Wijitha and Gu, YuanTong. 2015. "Physical mechanisms underlying the strain-rate-dependent mechanical behavior of kangaroo shoulder cartilage." Applied Physics Letters. 107 (10), pp. 103701-1. https://doi.org/10.1063/1.4929498
Investigation of the mechanical behavior of kangaroo humeral head cartilage tissue by a porohyperelastic model based on the strain-rate-dependent permeability
Thibbotuwawa, Namal, Oloyede, Adekunle, Senadeera, Wijitha, Li, Tong and Gu, YuanTong. 2015. "Investigation of the mechanical behavior of kangaroo humeral head cartilage tissue by a porohyperelastic model based on the strain-rate-dependent permeability." Journal of The Mechanical Behavior of Biomedical Materials. 51, pp. 248-259. https://doi.org/10.1016/j.jmbbm.2015.07.018
Estimation of biodiesel properties from chemical composition – an artificial neural network (ANN) approach
Jahirul, M. I., Senadeera, W., Brown, R. J. and Moghaddam, L.. 2014. "Estimation of biodiesel properties from chemical composition – an artificial neural network (ANN) approach." International Scientific Journal of Environmental Science. 3 (3), pp. 1-7.
Analysis of strain-rate dependent mechanical behavior of single chondrocyte: a finite element study
Gu, YuanTong, Nguyen, Trung Dung, Oloyede, Adekunle and Senadeera, Wijitha. 2014. "Analysis of strain-rate dependent mechanical behavior of single chondrocyte: a finite element study." International Journal of Computational Methods. 11 (1 (Supplement)), pp. 1344005-1. https://doi.org/10.1142/S0219876213440052
A particle based model to simulate microscale morphological changes of plant tissues during drying
Karunasena, H. C. P., Senadeera, W., Brown, R. J. and Gu, Y. T.. 2014. "A particle based model to simulate microscale morphological changes of plant tissues during drying." Soft Matter. 10 (29), pp. 5249-5268. https://doi.org/10.1039/c4sm00526k
A mesh free model for plant tissue deformations during drying
Karunasena, H. C. P., Senadeera, W., Brown, R. J. and Gu, Y. T.. 2014. "A mesh free model for plant tissue deformations during drying." Australian and New Zealand Industrial and Applied Mathematics (ANZIAM) Journal. 55 (EMAC2013), pp. C110-C137.
The influence of abrasive pretreatment on hot air drying of grape
Adiletta, Giuseppina, Senadeera, Wijitha, Liguori, Loredana, Crescitelli, Alessio, Albanese, Donatella and Russo, Paula. 2015. "The influence of abrasive pretreatment on hot air drying of grape." Food and Nutrition Sciences. 6, pp. 355-364. https://doi.org/10.4236/fns.2015.63036
Numerical investigation of plant tissue porosity and its influence on cellular level shrinkage during drying
Karunasena, H. C. P., Gu, Y. T., Brown, R. J. and Senadeera, W.. 2015. "Numerical investigation of plant tissue porosity and its influence on cellular level shrinkage during drying." Biosystems Engineering. 132, pp. 71-87. https://doi.org/10.1016/j.biosystemseng.2015.02.002
Influence of drying conditions on the moisture diffusion during single stage and two stage fluidized bed drying of bovine intestine for pet food
Alves-Filho, O., Senadeera, W. and Eikevik, T.. 2013. "Influence of drying conditions on the moisture diffusion during single stage and two stage fluidized bed drying of bovine intestine for pet food." Goncharova-Alves, S., Alves-Filho, O. and Eikevik, T. M. (ed.) 6th Nordic Drying Conference (NDC2013). Copenhagen, Denmark 05 - 07 Jun 2013 Copenhagen, Denmark.
Drying condition effects on fluidization quality and fluidization velocity at initial and final stages of cubical particulates for pet food
Alves-Filho, O., Senadeera, W. and Eikevik, T.. 2013. "Drying condition effects on fluidization quality and fluidization velocity at initial and final stages of cubical particulates for pet food." Goncharova-Alves, S., Alves-Filho, O. and Eikevik, T. M. (ed.) 6th Nordic Drying Conference (NDC2013). Copenhagen, Denmark 05 - 07 Jun 2013 Copenhagen, Denmark.
An artificial neutral network (ANN) model for predicting biodiesel kinetic viscosity as a function of temperature and chemical compositions
Jahirul, M. L., Senadeera, W., Brooks, P., Brown, R. J., Situ, R., Pham, P. X. and Masri, A. R.. 2013. "An artificial neutral network (ANN) model for predicting biodiesel kinetic viscosity as a function of temperature and chemical compositions." Piantadosi, J., Anderssen, R. S. and Boland, J. (ed.) 20th International Congress on Modelling and Simulation (MODSIM2013). Adelaide, Australia 01 - 06 Dec 2013 Canberra, Australia. Modelling and Simulation Society of Australia and New Zealand .
Application of meshfree methods to numerically simulate microscale deformations of different plant food materials during drying
Karunasena, H. C. P., Brown, R. J., Gu, Y. T. and Senadeera, W.. 2015. "Application of meshfree methods to numerically simulate microscale deformations of different plant food materials during drying." Journal of Food Engineering. 146, pp. 209-226. https://doi.org/10.1016/j.jfoodeng.2014.09.011
The use of artificial neural networks for identifying sustainable biodiesel feedstocks
Jahirul, Mohammed I., Brown, Richard J., Senadeera, Wijitha, O'Hara, Ian M. and Ristovski, Zoran D.. 2013. "The use of artificial neural networks for identifying sustainable biodiesel feedstocks." Energies. 6 (8), pp. 3764-3806. https://doi.org/10.3390/en6083764
Scanning electron microscopic study of microstructure of gala apples during hot air drying
Karunasena, H. C. P., Hesami, P., Senadeera, W., Gu, Y. T., Brown, R. J. and Oloyede, A.. 2014. "Scanning electron microscopic study of microstructure of gala apples during hot air drying." Drying Technology: an international journal. 32 (4), pp. 455-468. https://doi.org/10.1080/07373937.2013.837479
Numerical investigation of case hardening of plant tissue during drying and its influence on the cellular-level shrinkage
Karunasena, H. C. P., Gu, Y.T., Brown, R. J. and Senadeera, W.. 2015. "Numerical investigation of case hardening of plant tissue during drying and its influence on the cellular-level shrinkage." Drying Technology: an international journal. 33 (6), pp. 713-734. https://doi.org/10.1080/07373937.2014.982759
Biodiesel production from non-edible beauty leaf (Calophyllum inophyllum) oil: process pptimization using response surface methodology (RSM)
Jahirul, Mohammad I., Koh, Wenyong, Brown, Richard J., Senadeera, Wijitha, O'Hara, Ian and Moghaddam, Lalehvash. 2014. "Biodiesel production from non-edible beauty leaf (Calophyllum inophyllum) oil: process pptimization using response surface methodology (RSM)." Energies. 7 (8), pp. 5317-5331. https://doi.org/10.3390/en7085317
Statistical diagnosis of the best weibull methods for wind power assessment for agricultural applications
Azad, Abul Kalam, Rasul, Mohammad Golam and Yusaf, Talal. 2014. "Statistical diagnosis of the best weibull methods for wind power assessment for agricultural applications." Energies. 7 (5), pp. 3056-3085. https://doi.org/10.3390/en7053056
Experimental study on heat transfer coefficient and friction factor of Al2O3 nanofluid in a packed bed column
Rao, G. Srinivasa, Sharma, K. V., Chary, S. P., Bakar, R. A., Rahman, M. M., Kadirgama, K. and Noor, M. M.. 2011. "Experimental study on heat transfer coefficient and friction factor of Al2O3 nanofluid in a packed bed column." Journal of Mechanical Engineering and Sciences. 1 (1), pp. 1-15.
Channel based simulation and analysis of IEEE802.16(WiMAX) -2004/WMAN-OFDM physical layer for BWA to support telemedicine
Singh, Bikash C., Rahman, M. Mahbubur, Godder, Tapan K., Abu, L. and Bashar, Md. R.. 2010. "Channel based simulation and analysis of IEEE802.16(WiMAX) -2004/WMAN-OFDM physical layer for BWA to support telemedicine." Li, Yan, Yang, Jiajia, Wen, Peng and Wu, Jinglong (ed.) 2010 IEEE/ICME International Conference on Complex Medical Engineering (ICME 2010). Gold Coast, Australia 13 - 15 Jul 2010 Brisbane, Australia. https://doi.org/10.1109/ICCME.2010.5558837
Drying constant and shrinkage constant relations of different shaped food particulates: empirical models
Senadeera, W.. 2008. "Drying constant and shrinkage constant relations of different shaped food particulates: empirical models." Thorat, B. N. and Mujumdar, A. S. (ed.) 16th International Drying Symposium (IDS 2008). Hyderabad, India 09 - 12 Nov 2008 https://doi.org/10.1080/07373930903221812
Fluidization characteristics of moist food particles
Senadeera, Wijitha, Wijesinghe, Bandu, Young, Gordon and Bhandari, Bhesh. 2006. "Fluidization characteristics of moist food particles." International Journal of Food Engineering. 2 (1), pp. 1-13. https://doi.org/10.2202/1556-3758.1047
Modeling dimensional shrinkage of shaped foods in fluidized bed drying
Senadeera, Wijitha, Bhandari, Bhesh R., Young, Gordon and Wijesinghe, Bandu. 2005. "Modeling dimensional shrinkage of shaped foods in fluidized bed drying." Journal of Food Processing and Preservation. 29 (2), pp. 109-119. https://doi.org/10.1111/j.1745-4549.2005.00017.x
Influence of shapes of selected vegetable materials on drying kinetics during fluidized bed drying
Senadeera, Wijitha, Bhandari, Bhesh R., Young, Gordon and Wijesinghe, Bandu. 2003. "Influence of shapes of selected vegetable materials on drying kinetics during fluidized bed drying." Journal of Food Engineering. 58 (3), pp. 277-283. https://doi.org/10.1016/S0260-8774(02)00386-2
Methods for effective fluidization of particulate food materials
Senadeera, Wijitha, Bhandari, Bhesh R., Young, Gordon and Wijesinghe, Bandu. 2000. "Methods for effective fluidization of particulate food materials." Drying Technology: an international journal. 18 (7), pp. 1537-1557. https://doi.org/10.1080/07373930008917792
Physical properties and fluidization behaviour of fresh green bean particulates during fluidized bed drying
Senadeera, W., Bhandari, B., Young, G. and Wijesinghe, B.. 2000. "Physical properties and fluidization behaviour of fresh green bean particulates during fluidized bed drying." Food and Bioproducts Processing. 78 (C1), pp. 43-47. https://doi.org/10.1205/096030800532707