Faculty of Engineering and Surveying

Latest research outputs

475 results found

Sort by Date Title

The development of learning and teaching strategies and technical texts for diverse groups of adult learners

Faulconbridge, Robert Ian. 2008. The development of learning and teaching strategies and technical texts for diverse groups of adult learners. Doctorate other than PhD Doctor of Engineering. University of Southern Queensland.

Doctorate other than PhD

Relationship between electrical and mechanical loss tangents of SLG reinforced phenolic composites: pilot study

Ku, H., Cardona, F., Ball, J., Jacobson, W. and Trada, M.. 2008. "Relationship between electrical and mechanical loss tangents of SLG reinforced phenolic composites: pilot study ." Journal of Composite Materials. 42 (19), pp. 2083-2095. https://doi.org/10.1177/0021998308094548

Article

Numerical analysis of passive earth pressures with interfaces

Shiau, Jim and Smith, Catherine. 2006. "Numerical analysis of passive earth pressures with interfaces." Soares, Carlos Mota (ed.) 3rd European Conference on Computational Mechanics (ECCM 2006). Lisbon, Portugal 05 - 08 Jun 2006 Netherlands.

Paper

Developing a track model for testing the road pavement under repeated moving surface loads

Shiau, Jim S., Perumal, Tagarajan, Benjamin, Michael, Pather, Selvan and Ayers, Ron. 2006. "Developing a track model for testing the road pavement under repeated moving surface loads." 22nd ARRB Conference: Research Into Practice. Canberra, Australia 29 Oct - 02 Nov 2006 Canberra, Australia.

Paper

Loss tangent for low loss thermoplastic composites

Ku, Harry S., Ball, James A. R., Siores, Elias and Chan, Peter. 1999. "Loss tangent for low loss thermoplastic composites ." Science and Engineering of Composite Materials. 8 (3), pp. 123-128.

Article

Microwave processing and permittivity measurement of thermoplastic composites at elevated temperature

Ku, Harry S., Ball, James A. R., Siores, Elias and Horsfield, Brendan. 1999. "Microwave processing and permittivity measurement of thermoplastic composites at elevated temperature ." Journal of Materials Processing Technology. 89-90, pp. 419-424. https://doi.org/10.1016/S0924-0136(99)00018-7

Article

An important step in microwave processing of materials: permittivity measurements of thermoplastic composites at elevated temperatures

Ku, Harry S., Siores, Elias, Ball, James A. R. and Horsfield, Brendan. 1998. "An important step in microwave processing of materials: permittivity measurements of thermoplastic composites at elevated temperatures." Salem, Sam (ed.) 1998 Pacific Conference on Manufacturing. Brisbane, Australia 18 - 21 Aug 1998 Brisbane, Australia.

Paper

A review of triple helix linkages in New Zealand earthquake engineering networks and comparison with the Australian cooperative research centre model

Butcher, Peter and Thorpe, David. 2007. "A review of triple helix linkages in New Zealand earthquake engineering networks and comparison with the Australian cooperative research centre model." Etzkowitz, Henry and Wong, Poh-Kam (ed.) Triple Helix VI: 6th Biennial International Conference on University, Industry and Government Linkages. Singapore 16 - 18 May 2007 Singapore.

Paper

Experiences in implementing a postgraduate engineering management program

Thorpe, David and Fulcher, Robert. 2007. "Experiences in implementing a postgraduate engineering management program." Søndergaard, Harald and Hadgraft, Roger (ed.) 18th Annual Conference of the Australasian Association for Engineering Education (AAEE 2007). Melbourne, Australia 09 - 13 Dec 2007 Melbourne, Australia.

Paper

Science and its applications in The Theory of Moral Sentiments

Thorpe, David. 2007. "Science and its applications in The Theory of Moral Sentiments." Cockfield, Geoff, Firth, Ann and Laurent, John (ed.) New perspectives on Adam Smith's The Theory of moral sentiments. Cheltenham, United Kingdom. Edward Elgar Publishing. pp. 124-140

Edited book (chapter)

Incompatible 4-node element for gradient-dependent plasticity

Chen, G. and Baker, Graham. 2004. "Incompatible 4-node element for gradient-dependent plasticity." Advances in Structural Engineering: an international journal. 7 (2), pp. 169-177. https://doi.org/10.1260/1369433041211066

Article

Fracture toughness of phenol formaldehyde composites: pilot study

Ku, Harry, Rogers, David, Davey, Robert, Cardona, Francisco and Trada, Mohan. 2008. "Fracture toughness of phenol formaldehyde composites: pilot study." Journal of Materials Engineering and Performance. 17 (1), pp. 85-90. https://doi.org/10.1007/s11665-007-9115-2

Article

Mathematics support program for commencing engineering students between 1990 and 1996: an Australian case study

Taylor, Janet A. and Morgan, Michael J.. 1999. "Mathematics support program for commencing engineering students between 1990 and 1996: an Australian case study." International Journal of Engineering Education. 15 (6), pp. 486-492.

Article

A comparison of methods for mapping golf greens

Reynolds, Wade, Young, Frank R. and Gibbings, Peter. 2007. "A comparison of methods for mapping golf greens." Spatial Science Queensland. 2007 (4), pp. 33-36.

Article

An evaluation of fracture toughness of vinyl ester composites cured under microwave conditions

Ku, H., Chan, W. L., Trada, M. and Baddeley, D.. 2007. "An evaluation of fracture toughness of vinyl ester composites cured under microwave conditions." Journal of Materials Engineering and Performance. 16 (6), pp. 741-745. https://doi.org/10.1007/s11665-007-9104-5

Article

A new internal combustion engine configuration: opposed pistons with crank offset

Malpress, Ray and Buttsworth, David R.. 2007. "A new internal combustion engine configuration: opposed pistons with crank offset." Jacobs, Peter A., McIntyre, Tim, Cleary, Matthew J., Buttsworth, David R., Mee, David, Clements, Rose, Morgan, Richard and Lemckert, Charles (ed.) 16th Australasian Fluid Mechanics Conference (AFMC 2007). Gold Coast, Australia 03 - 07 Dec 2007 Brisbane, Australia.

Paper

Enhanced approach to consistency in gradient-dependent plasticity

Chen, G. and Baker, Graham. 2004. "Enhanced approach to consistency in gradient-dependent plasticity." Advances in Structural Engineering: an international journal. 7 (3), pp. 279-283. https://doi.org/10.1260/136943304323213229

Article

How well does the virtual reference stations (VERS) system of GPS base stations perform in comparison to conventional RTL?

Gibbings, Peter and Ong Kim Sun, G.. 2005. "How well does the virtual reference stations (VERS) system of GPS base stations perform in comparison to conventional RTL?" Journal of Spatial Science. 50 (1), pp. 59-73. https://doi.org/10.1080/14498596.2005.9635038

Article

Safe buffer distances for offstream earth dams

Moore, K. A. and Power, R. K.. 2002. "Safe buffer distances for offstream earth dams." Australasian Journal of Water Resources . 6 (1), pp. 1-15.

Article

Relationship between microwave irradiation and constituents of composites during joining process

Ku, H. S., Ball, J. A. R. and Siores, E.. 2000. "Relationship between microwave irradiation and constituents of composites during joining process." Transactions, Hong Kong Institution of Engineers. 7 (3), pp. 43-49. https://doi.org/10.1080/1023697X.2000.10667833

Article

Surface-wave propagation on a grounded dielectric slab covered by a high-permittivity material

Ball, James A. R. and Horsfield, Brendan. 2000. "Surface-wave propagation on a grounded dielectric slab covered by a high-permittivity material." IEEE Microwave and Guided Wave Letters. 10 (5), pp. 171-173. https://doi.org/10.1109/75.850367

Article

A fast convergent iterative boundary element method on PVM cluster

Mai-Duy, N., Nguyen-Hong, P. and Tran-Cong, T.. 1998. "A fast convergent iterative boundary element method on PVM cluster." Engineering Analysis with Boundary Elements. 22 (4), pp. 307-316. https://doi.org/10.1016/S0955-7997(98)00071-X

Article

An improved boundary element method for analysis of profile polymer extrusion

Nguyen-Thien, T., Tran-Cong, T. and Phan-Thien, N.. 1997. "An improved boundary element method for analysis of profile polymer extrusion." Engineering Analysis with Boundary Elements. 20 (1), pp. 81-89.

Article

Quantifying hail damage for crop loss assessment: techniques using remote sensing and geographic information systems

Chandler, Owen, Apan, Armando, Pullinger, Rod and Bullen, Ken. 2003. "Quantifying hail damage for crop loss assessment: techniques using remote sensing and geographic information systems." 11th Australasian Remote Sensing and Photogrammetry Conference (ARSPC2002): Images to Information. Brisbane, Australia 02 - 06 Sep 2002 Adelaide, Australia.

Paper

BEM-RBF approach for viscoelastic flow analysis

Tran-Cong, T., Mai-Duy, N. and Phan-Thien, N.. 2001. "BEM-RBF approach for viscoelastic flow analysis." Beskos, D., Brebbia, C., Katsikadelis, J. and Manolis, G. (ed.) 23rd International Conference on the Boundary Element Method (BEM 2001). Lemnos, Greece 07 - 09 May 2001 Southampton, Hants. United Kingdom. https://doi.org/10.2495/BE010301

Paper

Flexible delivery: an Australian perspective

Morgan, M. J.. 1998. "Flexible delivery: an Australian perspective." Pudlowski, Zenon J. (ed.) 5th Global Congress on Engineering Education 1998. Cracow, Poland 06 - 11 Sep 1998 Melbourne, Australia.

Paper

Non-contact extrudate profilometer: introductory paper

Taylor, Reginald, Hancock, Nigel and Tran-Cong, Thanh. 1997. "Non-contact extrudate profilometer: introductory paper." Werner, B. (ed.) 4th Annual Conference on Mechatronics and Machine Vision in Practice (MViP 1997). Toowoomba, Australia 23 - 25 Sep 1997 USA. https://doi.org/10.1109/MMVIP.1997.625315

Paper

An analytical model for predication of crack spacing due to shrinkage in concrete pavements

Chen, G. and Baker, Graham. 2004. "An analytical model for predication of crack spacing due to shrinkage in concrete pavements." Journal of Structural Engineering. 130 (10), pp. 1529-1533. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:10(1529)

Article

Influence of bond slip on crack spacing in numerical modeling of reinforced concrete

Chen, G. and Baker, Graham. 2003. "Influence of bond slip on crack spacing in numerical modeling of reinforced concrete." Journal of Structural Engineering. 129 (11), pp. 1514-1521. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:11(1514)

Article

A Rayleigh-Ritz procedure for localized buckling of a strut on a softening foundation by Hermite functions

Chen, G. and Baker, Graham. 2003. "A Rayleigh-Ritz procedure for localized buckling of a strut on a softening foundation by Hermite functions." International Journal of Solids and Structures. 40 (26), pp. 7463-7474. https://doi.org/10.1016/j.ijsolstr.2003.08.010

Article

An anisotropic thermomechanical damage model for concrete at transient elevated temperatures

Baker, Graham and deBorst, Rene. 2005. "An anisotropic thermomechanical damage model for concrete at transient elevated temperatures." Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences. 363 (1836), pp. 2603-2628. https://doi.org/10.1098/rsta.2005.1589

Article

Thermodynamics in solid mechanics: a commentary

Baker, Graham. 2005. "Thermodynamics in solid mechanics: a commentary." Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences. A363 (1836), pp. 2465-2477. https://doi.org/10.1098/rsta.2005.1669

Article

Estimation of shrub biomass: development and evaluation of allometric models leading to innovative teaching methods

Maraseni, Tek Narayan, Cockfield, Geoff, Apan, Armando and Mathers, Nicole. 2005. "Estimation of shrub biomass: development and evaluation of allometric models leading to innovative teaching methods." International Journal of Business and Management Education.

Article

A foundational investigation of vinyl ester / cenosphere composite materials for civil and structural engineering

Davey, Scott W.. 2004. A foundational investigation of vinyl ester / cenosphere composite materials for civil and structural engineering. PhD Thesis Doctor of Philosophy. University of Southern Queensland.

PhD Thesis

Fracture toughness of phenol formaldehyde composites post-cured in microwaves

Cardona, F., Ku, H., Pattarachaiyakoop, N., Rogers, D. and Trada, M.. 2007. "Fracture toughness of phenol formaldehyde composites post-cured in microwaves." Journal of Electromagnetic Waves and Applications. 21 (14), pp. 2137-2146. https://doi.org/10.1163/156939307783152867

Article

Assessing the accuracy and integrity of RTK GPS beneath high voltage power lines

Gibbings, Peter, Manuel, Brent, Penington, Rafe and McDougall, Kevin. 2001. "Assessing the accuracy and integrity of RTK GPS beneath high voltage power lines." Higgins, Matthew (ed.) 42nd Australian Surveyors Congress 2001: A Spatial Odyessy. Brisbane, Australia 25 - 28 Sep 2001 Brisbane, Australia.

Paper

« Previous

0
total views
0
total downloads
0
views this month
0
downloads this month