401607. Metals and alloy materials
| Title | 401607. Metals and alloy materials |
|---|---|
| Parent | 4016. Materials engineering |
Latest research outputs
Sort by Date Title
Microstructure and melting properties of Ag–Cu–In intermediate-temperature brazing alloys
Ma, Xue, Li, Liang-Feng, Zhang, Zu-Hua, Wang, Hao, Wang, En-Ze and Qiu, Tai. 2015. "Microstructure and melting properties of Ag–Cu–In intermediate-temperature brazing alloys." Rare Metals. 34 (5), pp. 324-328. https://doi.org/10.1007/s12598-015-0484-7Article
Surface characteristics and electrochemical behaviors of passive reinforcing steel in alkali-activated slag
Wang, Yangyang, Chen, Rui, Hu, Jie, Zhang, Zhangmin, Huang, Haoliang, Ma, Yuwei, Wei, Jiangxiong, Zhang, Zuhua, Yin, Suhong, Wang, Hao and Yu, Qijun. 2021. "Surface characteristics and electrochemical behaviors of passive reinforcing steel in alkali-activated slag." Corrosion Science. 190, pp. 1-12. https://doi.org/10.1016/j.corsci.2021.109657Article
Performance investigation of two AE source location techniques on a Planar Multilayer Structure
Hassan, Md. Mehedi, Khan, Md. Tawhidul Islam, Hasemura, Yuji and Islam, Md. Mainul. 2020. "Performance investigation of two AE source location techniques on a Planar Multilayer Structure." International Journal of Acoustics and Vibration. 25 (2), pp. 226-235. https://doi.org/10.20855/ijav.2020.25.21635Article
Study on the plastic deformation zone of Q235 steel via hammering tight seam
Wang, Yingwei, Dong, Xin, Huo, Siqi, Lv, Zhenhua, Ma, Zhongnan, Gao, Jinzhu, Gai, Xiuying and Wang, Rui. 2020. "Study on the plastic deformation zone of Q235 steel via hammering tight seam." Journal of Materials Research and Technology. 9 (4), pp. 7100-7103. https://doi.org/10.1016/j.jmrt.2020.04.030Article
Fatigue crack analysis of ferrite material by acoustic emission technique
Khan, Md. T. I., Rashid, A. A., Hidaka, R., Hattori, N. and Islam, Md. M.. 2019. "Fatigue crack analysis of ferrite material by acoustic emission technique." Journal of Mechanical Engineering and Sciences. 13 (2), pp. 5074-5089. https://doi.org/10.15282/jmes.13.2.2019.21.0418Article
High efficient nanostructured PbSe0. 5Te0. 5 exhibiting broad figure-of-merit plateau
Nandihalli, Nandihalli, Wijethunge, Dimuthu, Kim, Kyomin, Kim, Jiyong and Gayner, Chhatrasal. 2019. "High efficient nanostructured PbSe0. 5Te0. 5 exhibiting broad figure-of-merit plateau." Journal of Alloys and Compounds. 785, pp. 862-870. https://doi.org/10.1016/j.jallcom.2019.01.105Article
High-tensile-strength and ductile novel Ti-Fe-N-B alloys reinforced with TiS nanowires
Huang, Liqing, Qian, Ma, Wang, Lihua, Chen, Zhi-Gang, Shi, Zhiming, Nguyen, Van and Zou, Jin. 2017. "High-tensile-strength and ductile novel Ti-Fe-N-B alloys reinforced with TiS nanowires." Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing. 708, pp. 285-290. https://doi.org/10.1016/j.msea.2017.09.136Article
Thermoelectric properties of Ni0. 05Mo3Sb5. 4Te1. 6 composites with NiSb nanocoating
Nandihalli, Nandihalli, Robert, Liang, Wijethunge, Dimuthu, Zhou, Norman and Kleinke, Holger. 2018. "Thermoelectric properties of Ni0. 05Mo3Sb5. 4Te1. 6 composites with NiSb nanocoating." AIP Advances. 8. https://doi.org/10.1063/1.5038675Article
Simplified human thermoregulatory model for designing wearable thermoelectric devices
Wijethunge, Dimuthu, Kim, Donggyu and Kim, Woochul. 2018. "Simplified human thermoregulatory model for designing wearable thermoelectric devices." Journal of Physics D: Applied Physics. 51. https://doi.org/10.1088/1361-6463/aaa17eArticle
Interface microstructure and mechanical properties of copper/aluminum composite material
Yu, Bao Yi, Wang, Qing, Li, Qiang, Wu, Yu Juan and Chen, Yan. 2013. "Interface microstructure and mechanical properties of copper/aluminum composite material ." Sang, Xiaoming and Kim, Yun-Hae (ed.) 3rd International Conference on Advanced Engineering Materials and Technology (AEMT 2013). Zhangjiajie, China 11 - 12 May 2013 Zurich, Switzerland. https://doi.org/10.4028/www.scientific.net/AMR.753-755.207Paper
Wear and frictional behaviour of metals
Alotaibi, J. G., Yousif, B. F. and Yusaf, T. F.. 2014. "Wear and frictional behaviour of metals." Kida, Katsuyuki (ed.) 3rd International Conference on Advanced Materials and Engineering Materials (ICAMEM 2013). Singapore 14 - 15 Dec 2013 Zurich, Switzerland. https://doi.org/10.4028/www.scientific.net/AMR.893.430Paper
Effects of initial texture on rolling texture and property of electrodeposited nickel plate
Yang, Yanling, Chen, Jingeng, Guo, Lianlian, Tan, Dunqiang, Zeng, Qunfeng, Liu, Qiuxiang, Liu, Keming, Chen, Zhigang, Zou, Jin and Lu, Deping. 2015. "Effects of initial texture on rolling texture and property of electrodeposited nickel plate." Journal of Computational and Theoretical Nanoscience. 12 (9), pp. 2643-2647. https://doi.org/10.1166/jctn.2015.4156Article
Microstructure and properties of Mg-Nd-Zn-Zr alloys
Wang, H., Ning, Z. L., Liang, W. Z., Cao, F. Y. and Sun, J. F.. 2010. "Microstructure and properties of Mg-Nd-Zn-Zr alloys." 2009 International Conference and Exhibition on Materials and AustCeram (MA 2009). Gold Coast, Australia 01 - 03 Jul 2009 Melbourne, Australia.Paper
More than half reduction in price per watt of thermoelectric device without increasing the thermoelectric figure of merit of materials
Hwang, Junphil, Kim, Hoon, Wijethunge, Dimuthu, Nandihalli, Nagaraj, Eom, Yoomin, Park, Hwanjoo, Kim, Jungwon and Kim, Woochul. 2017. "More than half reduction in price per watt of thermoelectric device without increasing the thermoelectric figure of merit of materials." Applied Energy. 205, pp. 1459-1466. https://doi.org/10.1016/j.apenergy.2017.09.080Article
Mat-like flexible thermoelectric system based on rigid inorganic bulk materials
Park, Hwanjoo, Kim, Donggyu, Eom, Yoomin, Wijethunge, Dimuthu, Hwang, Junphil, Kim, Hoon and Kim, Woochul. 2017. "Mat-like flexible thermoelectric system based on rigid inorganic bulk materials." Journal of Physics D: Applied Physics. 50. https://doi.org/10.1088/1361-6463/aa94f7Article
Effects of rare earth La on microstructure and properties of Ag-21Cu-25Sn alloy ribbon prepared by melt spinning
Ma, Xue, Li, Liangfeng, Zhang, Zuhua, Wang, Hao, Wang, Enze and Qiu, Tai. 2015. "Effects of rare earth La on microstructure and properties of Ag-21Cu-25Sn alloy ribbon prepared by melt spinning ." Materials and Design. 83, pp. 1-5. https://doi.org/10.1016/j.matdes.2015.05.083Article
Wear behaviour and mechanism of different metals sliding against stainless steel counterface
Alotaibi, J. G., Yousif, B. F. and Yusaf, T. F.. 2014. "Wear behaviour and mechanism of different metals sliding against stainless steel counterface." Proceedings of the Institution of Mechanical Engineers Part J: Journal of Engineering Tribology. 228 (6), pp. 692-704. https://doi.org/10.1177/1350650114527072Article
Effect of SiC addition on mechanical and wear characteristics of WC-32(W-Ti)C-6Co cemented carbides
Albdiry, M. T. and Yousif, B. F.. 2014. "Effect of SiC addition on mechanical and wear characteristics of WC-32(W-Ti)C-6Co cemented carbides." International Journal of Precision Technology. 4 (1/2), pp. 110-121. https://doi.org/10.1504/IJPTECH.2014.060611Article
Effects of indium addition on properties and wettability of Sn–0.7Cu–0.2Ni lead-free solders
Li, L. F., Cheng, Y. K., Xu, G. L., Wang, E. Z., Zhang, Z. H. and Wang, H.. 2014. "Effects of indium addition on properties and wettability of Sn–0.7Cu–0.2Ni lead-free solders." Materials and Design. 64, pp. 15-20. https://doi.org/10.1016/j.matdes.2014.07.035Article
Utilization of alum sludge for producing aluminum hydroxide and layered double hydroxide
Wang, Ling Yun, Tong, Dong Shen, Zhao, Li Zhi, Liu, Feng Guo, An, Ning, Yu, Wei Hua and Zhou, Chun Hui. 2014. "Utilization of alum sludge for producing aluminum hydroxide and layered double hydroxide." Ceramics International. 40 (10), pp. 15503-15514. https://doi.org/10.1016/j.ceramint.2014.07.012Article
Bio-corrosion of a magnesium alloy with different processing histories
Wang, H., Estrin, Y. and Zuberova, Z.. 2008. "Bio-corrosion of a magnesium alloy with different processing histories." Materials Letters. 62 (16), pp. 2476-2479. https://doi.org/10.1016/j.matlet.2007.12.052Article
Controlled nucleation method: a new process for semisolid metal forming
Wang, Hao. 2005. "Controlled nucleation method: a new process for semisolid metal forming." Special Casting and Non-ferrous Alloys (Tezhong Zhuzao Ji Youse Hejin) .Article
Effect of in-situ TiC particles on hot deformation behavior of spray formed 7075 Al alloy
Liu, Hui-min, Li, Zhi-peng and Wang, Hao. 2013. "Effect of in-situ TiC particles on hot deformation behavior of spray formed 7075 Al alloy." Transactions of Materials and Heat Treatment (Cailiao Rechuli Xuebao). 34 (S2), pp. 173-178.Article
A study on hot deformation behavior of Ni-42.5Ti-7.5Cu alloy
Etaati, Amir and Dehghani, Kamran. 2013. "A study on hot deformation behavior of Ni-42.5Ti-7.5Cu alloy." Materials Chemistry and Physics. 140 (1), pp. 208-215. https://doi.org/10.1016/j.matchemphys.2013.03.022Article
Semisolid processing technology
Xie, Shuisheng, Li, Xinggang, Wang, Hao and Zhang, Ying. 2012. Semisolid processing technology. Beijing, China. Metallurgical Industry Press.Authored book
Predicting the flow stress behavior of Ni-42.5Ti-3Cu during hot deformation using constitutive equations
Etaati, Amir, Dehghani, Kamran, Ebrahimi, G. R. and Wang, Hao. 2013. "Predicting the flow stress behavior of Ni-42.5Ti-3Cu during hot deformation using constitutive equations." Metals and Materials International. 19 (1), pp. 5-9. https://doi.org/10.1007/s12540-013-1002-9Article
Effect of alumina inclusions on microstructure and mechanical properties of 62 WC, 32 (Ti-W) C and 6 Co compacts
Albdiry, Mushtaq and Alethari, Haydar. 2012. "Effect of alumina inclusions on microstructure and mechanical properties of 62 WC, 32 (Ti-W) C and 6 Co compacts." International Journal of Microstructure and Materials Properties. 7 (4), pp. 329-340. https://doi.org/10.1504/IJMMP.2012.048523Article
Comparison of copper scavenging capacity between two different red mud types
Ma, Yingqun, Si, Chunhua and Lin, Chuxia. 2012. "Comparison of copper scavenging capacity between two different red mud types." Materials. 5 (9), pp. 1708-1721. https://doi.org/10.3390/ma5091708Article
Observation and prediction of the hot tear susceptibility of ternary Al-Si-Mg alloys
Easton, Mark A., Wang, Hao, Grandfield, John, Davidson, Cameron J., StJohn, David H., Sweet, Lisa D. and Couper, Malcolm J.. 2012. "Observation and prediction of the hot tear susceptibility of ternary Al-Si-Mg alloys." Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 43 (9), pp. 3227-3238. https://doi.org/10.1007/s11661-012-1132-6Article
Numerical simulation the temperature field of the multi-coil batch during annealing process in Bell-type furnace
Mo, Chun-li, Li, Qiang, Guo, Xu-ming and Wang, Hao. 2012. "Numerical simulation the temperature field of the multi-coil batch during annealing process in Bell-type furnace." 2nd International Conference on Advanced Engineering Materials and Technology (AEMT 2012). Zhuhai, China 06 Jul 2012 Zurich, Switzerland. https://doi.org/10.4028/www.scientific.net/AMR.538-541.637Paper
In vitro biodegradation behavior of magnesium and magnesium alloy
Wang, Hao and Shi, Zhiming. 2011. "In vitro biodegradation behavior of magnesium and magnesium alloy ." Journal of Biomedical Materials Research Part B: Applied Biomaterials. 98B (2), pp. 203-209. https://doi.org/10.1002/jbm.b.31769Article
Numerical simulation of rolling process and microstructure evolution of AM50 Mg alloy during hot rolling process
Hua, Fuan, Zhang, Chaoyi, Li, Qiang, Yu, Baoyi, Liu, Weihua, Li, Runxia, Xie, Shuisheng, Huang, Guojie, Cheng, Lei, Fu, Yao and Wang, Hao. 2011. "Numerical simulation of rolling process and microstructure evolution of AM50 Mg alloy during hot rolling process ." Advanced Materials Research. 291-294, pp. 449-454. https://doi.org/10.4028/www.scientific.net/AMR.291-294.449Article
Rehabilitation of deteriorated steel truss members using CFRP
Tawfik, Qaidar H.. 2012. Rehabilitation of deteriorated steel truss members using CFRP. Masters Thesis Master of Engineering (Research). University of Southern Queensland.Masters Thesis
Deformation behaviour of aluminum alloy A356 in semisolid state
Wang, H. and Ning, Z. L.. 2009. "Deformation behaviour of aluminum alloy A356 in semisolid state ." Aravinthan, Thiru, Karunasena, Warna (Karu) and Wang, Hao (ed.) 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM20). Toowoomba, Australia 02 - 05 Dec 2008 London, United Kingdom.Paper
Solidification microstructure modelling using cellular automaton method
Wang, H. and Li, Q.. 2008. "Solidification microstructure modelling using cellular automaton method." International Conference on Frontiers in Materials Science and Technology (FMST 2008). Brisbane, Australia 26 - 28 Mar 2008 Zurich, Switzerland. https://doi.org/10.4028/www.scientific.net/AMR.32.271Paper
The development of a new grain refiner for magnesium alloys using the edge-to-edge model
Fu, H. M., Qiu, D., Zhang, M. X., Wang, H., Kelly, P. M. and Taylor, J. A.. 2008. "The development of a new grain refiner for magnesium alloys using the edge-to-edge model." Journal of Alloys and Compounds. 456 (1-2), pp. 390-394. https://doi.org/10.1016/j.jallcom.2007.02.076Article
Study of biodegradation of pure magnesium
Ren, Yibin, Wang, Hao, Huang, Jingjing, Zhang, Bingchun and Yang, Ke. 2007. "Study of biodegradation of pure magnesium." Kim, Young-Ha, Cho, Chong-Su, Kang, Inn-Kyu, Kim, Suk Young and Kwon, Oh Hyeong (ed.) ASBM7: 7th Asian Symposium on Biomedical Materials. Jeju, Korea 20 - 23 Aug 2006 Switzerland. John Wiley & Sons. https://doi.org/10.4028/www.scientific.net/KEM.342-343.601Paper
Influence of casting temperature on microstructures and mechanical properties of Cu50Zr45.5Ti2.5Y2 metallic glass prepared using copper mold casting
Zhu, Zhengwang, Zhang, Haifeng, Wang, Hao, Ding, Bingzhe, Hu, Zhuang-Qi and Huang, Han. 2009. "Influence of casting temperature on microstructures and mechanical properties of Cu50Zr45.5Ti2.5Y2 metallic glass prepared using copper mold casting ." Journal of Materials Research. 24 (10), pp. 3108-3115. https://doi.org/10.1557/jmr.2009.0373Article
Development of hot drawing process for nitinol tube
Chen, Wei, Wang, H., Zhang, Lei and Tang, Xiushan. 2009. "Development of hot drawing process for nitinol tube." International Journal of Modern Physics B. 23 (6/7), pp. 1968-1974. https://doi.org/10.1142/S0217979209061913Article
Study of bio-corrosion of pure magnesium
Ren, Yibin, Huang, Jingjing, Yang, Ke, Zhang, Bingchun, Yao, Zhiming and Wang, Hao. 2005. "Study of bio-corrosion of pure magnesium." Acta Metallurgica Sinica (English Letters). 41 (11), pp. 1228-1232.Article