The potential of wind and solar energy in Malaysia east coast: preliminary study at Universiti Malaysia Pahang (UMP)

Paper


Amirruddin, A. K., Noor, M. M., Kadirgama, K. and Sharma, K. V.. 2012. "The potential of wind and solar energy in Malaysia east coast: preliminary study at Universiti Malaysia Pahang (UMP) ." Brebbia, C. A. and Zubir, S. S. (ed.) 3rd International Conference on Management of Natural Resources, Sustainable Development and Ecological Hazards: Ravage of the Planet III (RAV 2011) . Selangor, Malaysia 13 - 15 Dec 2011 Southampton, UK .
Paper/Presentation Title

The potential of wind and solar energy in Malaysia east coast: preliminary study at Universiti Malaysia Pahang (UMP)

Presentation TypePaper
AuthorsAmirruddin, A. K. (Author), Noor, M. M. (Author), Kadirgama, K. (Author) and Sharma, K. V. (Author)
EditorsBrebbia, C. A. and Zubir, S. S.
Journal or Proceedings TitleManagement of Natural Resources, Sustainable Development and Ecological Hazards III
Number of Pages8
Year2012
Place of PublicationSouthampton, UK
ISBN9781845645328
Web Address (URL) of Paperhttps://www.witpress.com/elibrary/wit-transactions-on-ecology-and-the-environment/148/22994
Web Address (URL) of Conference Proceedingshttps://www.wessex.ac.uk/conferences/2011/ravageoftheplanet-2011
Conference/Event3rd International Conference on Management of Natural Resources, Sustainable Development and Ecological Hazards: Ravage of the Planet III (RAV 2011)
Event Details
3rd International Conference on Management of Natural Resources, Sustainable Development and Ecological Hazards: Ravage of the Planet III (RAV 2011)
Parent
International Conference on the Management of Natural Resources, Sustainable Development and Ecological Hazards
Event Date
13 to end of 15 Dec 2011
Event Location
Selangor, Malaysia
Abstract

The main objective of this article is to investigate wind and solar potential in Universiti Malaysia Pahang renewable energy resources as response to Malaysian government regarding to green technology. It is a preliminary study mainly focuses on technique of measurement and collecting potential wind and solar data. The first solar panels installation was planned to be inside Universiti Malaysia Pahang with the first wind turbine being installed at the bank of the Sungai Pahang in Pekan, Pahang.

The local solar radiation regime was described with on-site measurements and calculations where the former was carried out from the beginning of 2010. The setup of the measurement device is discussed in this paper.

Keywordsgreen technology; solar energy; wind energy; Malaysia
ANZSRC Field of Research 2020401703. Energy generation, conversion and storage (excl. chemical and electrical)
401102. Environmentally sustainable engineering
401706. Numerical modelling and mechanical characterisation
Public Notes

Files associated with this item cannot be displayed due to copyright restrictions.

Byline AffiliationsUniversity of Malaysia Pahang, Malaysia
Computational Engineering and Science Research Centre
Institution of OriginUniversity of Southern Queensland
Permalink -

https://research.usq.edu.au/item/q17zz/the-potential-of-wind-and-solar-energy-in-malaysia-east-coast-preliminary-study-at-universiti-malaysia-pahang-ump

  • 1973
    total views
  • 22
    total downloads
  • 1
    views this month
  • 0
    downloads this month

Export as

Related outputs

The Simulation of Biogas Combustion in Top Open Burner
Selvam, A., Noor, M.M., Norhafana, M., Ihsan, C.K., Khalid, A., Mahmood, R.A., Harikrishnan, S. and Nayak, S.. 2024. "The Simulation of Biogas Combustion in Top Open Burner." 7th International Conference on Mechanical Engineering Research 2023 (ICMER 2023). Kuantan, Malaysia 12 - 13 Sep 2023 United Kingdom . IOP Publishing. https://doi.org/10.1088/1742-6596/2688/1/012023
Experimental Study on the Efficiency Improvement of Flat Plate Solar Collectors Using Hybrid Nanofluids Graphene/Waste Cotton
Mahamude, Abu Shadate Faisal, Harun, Wan Sharuzi Wan, Kadirgama, Kumaran, Ramasamy, Devarajan, Farhana, Kaniz, Saleh, Khalid and Yusaf, Talal. 2022. "Experimental Study on the Efficiency Improvement of Flat Plate Solar Collectors Using Hybrid Nanofluids Graphene/Waste Cotton." Energies. 15 (7), pp. 1-27. https://doi.org/10.3390/en15072309
Alcohol and ether as alternative fuels in spark ignition engine: A review
Awad, Omar I., Mamat, R., Ali, Obed M., Sidik, N. A. C., Yusaf, T., Kadirgama, K. and Kettner, Maurice. 2018. "Alcohol and ether as alternative fuels in spark ignition engine: A review." Renewable and Sustainable Energy Reviews. 82 (Part 3), pp. 2586-2605. https://doi.org/10.1016/j.rser.2017.09.074
Response surface methodology (RSM) based multi-objective optimization of fusel oil-gasoline blends at different water content in SI engine
Awad, Omar I., Mamat, R., Ali, Obed M., Azmi, W. H., Kadirgama, K., Yusri, I. M., Leman, A. M. and Yusaf, T.. 2017. "Response surface methodology (RSM) based multi-objective optimization of fusel oil-gasoline blends at different water content in SI engine." Energy Conversion and Management. 150, pp. 222-241. https://doi.org/10.1016/j.enconman.2017.07.047
A Comprehensive Review on Efficiency Enhancement of Solar Collectors Using Hybrid Nanofluids
Mahamude, Abu Shadate Faisal, Kamarulzaman, Muhamad Kamal, Harun, Wan Sharuzi Wan, Kadirgama, Kumaran, Ramasamy, Devarajan, Farhana, Kaniz, Bakar, Rosli Abu, Yusaf, Talal, Subramanion, Sivarao and Yousif, Belal. 2022. "A Comprehensive Review on Efficiency Enhancement of Solar Collectors Using Hybrid Nanofluids." Energies. 15 (4), pp. 1-25. https://doi.org/10.3390/en15041391
Hydrogen Energy Demand Growth Prediction and Assessment (2021–2050) Using a System Thinking and System Dynamics Approach
Yusaf, Talal, Laimon, Mohamd, Alrefae, Waleed, Kadirgama, Kumaran, Al Dhahad, Hayder, Ramasamy, Devarajan, Kamarulzaman, Mohd Kamal and Yousif, Belal. 2022. "Hydrogen Energy Demand Growth Prediction and Assessment (2021–2050) Using a System Thinking and System Dynamics Approach." Applied Sciences. 12 (2), pp. 1-16. https://doi.org/10.3390/app12020781
Experimental analysis on the performance, combustion/emission characteristics of a DI diesel engine using hydrogen in dual fuel mode
Bakar, R.A., Widudo, Kadirgama, K., Ramasamy, D., Yusaf, Talal, Kamarulzaman, M.K., Sivaraos, Aslfattahi, Navid, Samylingam, L. and Alwayzy, Sadam H.. 2022. "Experimental analysis on the performance, combustion/emission characteristics of a DI diesel engine using hydrogen in dual fuel mode." International Journal of Hydrogen Energy. 52 (Part C), pp. 843-860. https://doi.org/10.1016/j.ijhydene.2022.04.129
Review of mechanical vapour compression refrigeration system Part 2: performance challenge
Mahmood, R. A., Ali, O. M., Al-Janabi, A., Al-Doori, G. and Noor, M. M.. 2021. "Review of mechanical vapour compression refrigeration system Part 2: performance challenge." International Journal of Applied Mechanics and Engineering. 26 (3), pp. 119-130. https://doi.org/10.2478/ijame-2021-0039
Mechanical Vapour Compression Refrigeration System: Review Part 1: Environment Challenge
Mahmood, Raid, Ali, Omar M. and Noor, M. M.. 2020. "Mechanical Vapour Compression Refrigeration System: Review Part 1: Environment Challenge." International Journal of Applied Mechanics and Engineering. 25 (4), pp. 130-147. https://doi.org/10.2478/ijame-2020-0054
The study of air fuel ratio for open furnace MILD combustion of biogas on bluff-body burner
Noor, M. M., Wandel, Andrew P. and Yusaf, T. F.. 2012. "The study of air fuel ratio for open furnace MILD combustion of biogas on bluff-body burner." 2012 Southern Regional Engineering Conference (SREC 2012). Toowoomba, Australia 01 Sep 2012 Canberra, Australia.
The development of MILD combustion open burner experimental setup
Noor, M. M., Wandel, Andrew P. and Yusaf, Talal. 2013. "The development of MILD combustion open burner experimental setup." Ishak, Mahadzir and Rahman, Md. Mustafizur (ed.) 2nd International Conference of Mechanical Engineering Research (ICMER 2013). Pahang, Malaysia 01 - 03 Jul 2013 Pahang, Malaysia.
Detail guide for CFD on the simulation of biogas combustion in bluff-body mild burner
Noor, M. M., Wandel, Andrew P. and Yusaf, Talal. 2013. "Detail guide for CFD on the simulation of biogas combustion in bluff-body mild burner." Ishak, Mahadzir and Rahman, Md. Mustafizur (ed.) 2nd International Conference of Mechanical Engineering Research (ICMER 2013). Pahang, Malaysia 01 - 03 Jul 2013 Pahang, Malaysia.
Mild combustion: the future for lean and clean combustion
Yusaf, Talal, Noor, M. M. and Wandel, Andrew P.. 2013. "Mild combustion: the future for lean and clean combustion." Ishak, Mahadzir and Rahman, Md. Mustafizur (ed.) 2nd International Conference of Mechanical Engineering Research (ICMER 2013). Pahang, Malaysia 01 - 03 Jul 2013 Pahang, Malaysia.
Experimental and numerical study of MILD combustion in an open-end furnace with exhaust gas recirculation using methane and biogas
Noor, Muhamad Mat. 2015. Experimental and numerical study of MILD combustion in an open-end furnace with exhaust gas recirculation using methane and biogas. PhD Thesis Doctor of Philosophy. University of Southern Queensland.
Air fuel ratio study for mixture of biogas and hydrogen on mild combustion
Noor, M. M., Wandel, Andrew P. and Yusaf, Talal. 2014. "Air fuel ratio study for mixture of biogas and hydrogen on mild combustion." International Journal of Automotive and Mechanical Engineering. 10 (1), pp. 2144-2154. https://doi.org/10.15282/ijame.9.2013.29.0180
Effect of air-fuel ratio on temperature distribution and pollutants for biogas MILD combustion
Noor, M. M., Wandel, Andrew P. and Yusaf, Talal. 2014. "Effect of air-fuel ratio on temperature distribution and pollutants for biogas MILD combustion." International Journal of Automotive and Mechanical Engineering. 10 (1), pp. 1980-1992. https://doi.org/10.15282/ijame.10.2014.15.0166
The simulation of biogas combustion in a MILD burner
Noor, M. M., Wandel, Andrew P. and Yusaf, Talal. 2014. "The simulation of biogas combustion in a MILD burner." Journal of Mechanical Engineering and Sciences. 6 (1), pp. 995-1013.
MILD combustion: the future for lean and clean combustion technology
Noor, M. M., Wandel, Andrew P. and Yusaf, Talal. 2014. "MILD combustion: the future for lean and clean combustion technology." International Review of Mechanical Engineering. 8 (1), pp. 251-257.
Design and development of mild combustion burner
Noor, M. M., Wandel, Andrew P. and Yusaf, Talal. 2013. "Design and development of mild combustion burner." Journal of Mechanical Engineering and Sciences. 5, pp. 662-676. https://doi.org/10.15282/jmes.5.2013.13.0064
Effect of compressed natural gas mixing on the engine performance and emissions
Yusaf, T., Baker, P., Hamawand, I. and Noor, M. M.. 2013. "Effect of compressed natural gas mixing on the engine performance and emissions." International Journal of Automotive and Mechanical Engineering. 8 (1), pp. 1416-1429.
Analysis of recirculation zone and ignition position of non-premixed bluff-body for biogas mild combustion
Noor, M. M., Wandel, Andrew P. and Yusaf, Talal. 2013. "Analysis of recirculation zone and ignition position of non-premixed bluff-body for biogas mild combustion." International Journal of Automotive and Mechanical Engineering. 8 (1), pp. 1176-1186.
The analysis of recirculation zone and ignition position of non-premixed bluff-body for biogas mild combustion
Noor, M. M., Wandel, Andrew P. and Yusaf, Talal. 2013. "The analysis of recirculation zone and ignition position of non-premixed bluff-body for biogas mild combustion." Ishak, Mahadzir and Rahman, Md. Mustafizur (ed.) 2nd International Conference of Mechanical Engineering Research (ICMER 2013). Pahang, Malaysia 01 - 03 Jul 2013 Pahang, Malaysia.
Numerical study of oxygen dilution and temperature distribution of biogas combustion in Bluff-body MILD burner
Noor, M. M., Wandel, Andrew P. and Yusaf, Talal. 2013. "Numerical study of oxygen dilution and temperature distribution of biogas combustion in Bluff-body MILD burner." Masri, Assaad (ed.) 7th Australian Combustion Symposium (ACS 2013). Perth, Australia 06 - 08 Nov 2013 Perth, Australia.
The air fuel ratio study for the mixture of biogas and hydrogen on mild combustion
Noor, M. M., Wandel, Andrew P. and Yusaf, Talal. 2013. "The air fuel ratio study for the mixture of biogas and hydrogen on mild combustion." 3rd Malaysian Postgraduate Conference (MPC 2013). Sydney, Australia 04 - 05 Jul 2013 Sydney, Australia.
Discretization of three dimensional non-uniform grid: conditional moment closure elliptic equation using finite difference method
Noor, M. M., Wandel, Andrew P. and Yusaf, Talal. 2013. "Discretization of three dimensional non-uniform grid: conditional moment closure elliptic equation using finite difference method." 3rd Malaysian Postgraduate Conference (MPC 2013). Sydney, Australia 04 - 05 Jul 2013 Sydney, Australia.
A review of mild combustion and open furnace design consideration
Noor, M. M., Wandel, Andrew P. and Yusaf, Talal. 2012. "A review of mild combustion and open furnace design consideration." International Journal of Automotive and Mechanical Engineering. 6 (1), pp. 730-754.
Investigation of Biogas Moderate or Intense Low Oxygen Dilution (MILD) combustion on open furnace bluff-body burner
Noor, M. M., Wandel, Andrew P. and Yusaf, T. F.. 2012. "Investigation of Biogas Moderate or Intense Low Oxygen Dilution (MILD) combustion on open furnace bluff-body burner." Noor, M. M., Baker, Paul and Yusaf, Talal F. (ed.) USQ Combustion Meeting 2012 (29th August). Toowoomba, Australia 29 Aug 2012 Toowoomba, Australia.
Modelling of non-premixed turbulent combustion of hydrogen using conditional moment closure method
Noor, M. M., Hairuddin, A. Aziz, Wandel, Andrew P. and Yusaf, T. F.. 2012. "Modelling of non-premixed turbulent combustion of hydrogen using conditional moment closure method." IOP Conference Series: Materials Science and Engineering. 36 (1), pp. 1-17. https://doi.org/10.1088/1757-899X/36/1/012036
The modelling of the effect of air fuel ratio on unburned hydrocarbons for MILD combustion
Noor, M. M., Wandel, Andrew P. and Yusaf, T. F.. 2012. "The modelling of the effect of air fuel ratio on unburned hydrocarbons for MILD combustion." Noor, M. M., Rahman, M. M. and Ismail, J. (ed.) 2nd Malaysian Postgraduate Conference (MPC 2012). Gold Coast, Australia 07 - 09 Jul 2012 Sydney, Australia.
A preliminary study of control parameters for open furnace mild combustion using CFD
Noor, M. M., Wandel, Andrew P. and Yusaf, T. F.. 2012. "A preliminary study of control parameters for open furnace mild combustion using CFD." Noor, M. M., Rahman, M. M. and Ismail, J. (ed.) 2nd Malaysian Postgraduate Conference (MPC 2012). Gold Coast, Australia 07 - 09 Jul 2012 Sydney, Australia.
Mild combustion: a technical review towards open furnace combustion
Noor, M. M., Wandel, Andrew P. and Yusaf, T. F.. 2012. "Mild combustion: a technical review towards open furnace combustion." Noor, M. M., Rahman, M. M. and Ismail, J. (ed.) 2nd Malaysian Postgraduate Conference (MPC 2012). Gold Coast, Australia 07 - 09 Jul 2012 Sydney, Australia.
Numerical investigation of influence of air and fuel dilution for open furnace MILD combustion burner
Noor, M. M., Wandel, Andrew P. and Yusaf, T. F.. 2012. "Numerical investigation of influence of air and fuel dilution for open furnace MILD combustion burner." 2012 Southern Regional Engineering Conference (SREC 2012). Toowoomba, Australia 01 Sep 2012 Canberra, Australia.
The potential of wind and solar energy in Malaysia east coast: preliminary study at Universiti Malaysia Pahang (UMP)
Noor, M. M., Amiruddin, A. K., Kadirgama, K. and Sharma, K. V.. 2011. "The potential of wind and solar energy in Malaysia east coast: preliminary study at Universiti Malaysia Pahang (UMP)." Brebbia, C. A. and Zubir, S. S. (ed.) 3rd International Conference on Energy and Sustainability . Alicante, Spain 11 - 13 Apr 2011 United Kingdom .
Implementation of conditional moment closure using the Taylor expansion and finite differences
Noor, M. M., Hairuddin, A. Aziz, Wandel, Andrew P. and Yusaf, T. F.. 2011. "Implementation of conditional moment closure using the Taylor expansion and finite differences." 1st International Conference of Mechanical Engineering Research (ICMER 2011). Kuantan, Malaysia 05 - 07 Dec 2011 Kuantan, Malaysia.
Experimental study on heat transfer coefficient and friction factor of Al2O3 nanofluid in a packed bed column
Rao, G. Srinivasa, Sharma, K. V., Chary, S. P., Bakar, R. A., Rahman, M. M., Kadirgama, K. and Noor, M. M.. 2011. "Experimental study on heat transfer coefficient and friction factor of Al2O3 nanofluid in a packed bed column." Journal of Mechanical Engineering and Sciences. 1 (1), pp. 1-15.
A hybrid EMST-modified Curl's model for turbulent combustion modelling
Noor, M. M., Wandel, Andrew P. and Yusaf, T. F.. 2011. "A hybrid EMST-modified Curl's model for turbulent combustion modelling." University of Southern Queensland's Research Evening: Showcasing USQ Research (2011). Toowoomba, Australia 17 Nov 2011
Study of random particle interactions for analysis of diffusion lengths in turbulent combustion modelling
Noor, M. M., Yusaf, T. F. and Wandel, Andrew P.. 2011. "Study of random particle interactions for analysis of diffusion lengths in turbulent combustion modelling." Kennedy, Eric, Dlugogorski, Bogdan, Moghtaderi, Behdad and Masri, Assaad (ed.) 11th Australian Combustion Symposium (ACS 2011). Newcastle, Australia 29 Nov - 01 Dec 2011 Sydney, Australia.
Experimental and modeling investigation of the performance characteristics on diesel HCCI with hydrogen additive - a review
Supeni, E. E., Yusaf, Talal, Wandel, Andrew P., Buttsworth, David R. and Noor, M. M.. 2010. "Experimental and modeling investigation of the performance characteristics on diesel HCCI with hydrogen additive - a review." 2nd National Conference in Mechanical Engineering Research and Postgraduate Studies. Kuantan, Malaysia 03 - 04 Dec 2010 Malaysia.
Development of a high pressure compressed natural gas mixer for a 1.5 litre CNG-diesel dual engine
Noor, M. M., Kadirgama, K., Devarajan, R., Rejab, M. R. M., Zuki, N. M. and Yusaf, Talal. 2008. "Development of a high pressure compressed natural gas mixer for a 1.5 litre CNG-diesel dual engine." National Conference on Design and Concurrent Engineering (DECON) 2008. Melaka, Malaysia 28 - 29 Oct 2008 Malaysia.