Review of mechanical vapour compression refrigeration system Part 2: performance challenge

Article


Mahmood, R. A., Ali, O. M., Al-Janabi, A., Al-Doori, G. and Noor, M. M.. 2021. "Review of mechanical vapour compression refrigeration system Part 2: performance challenge." International Journal of Applied Mechanics and Engineering. 26 (3), pp. 119-130. https://doi.org/10.2478/ijame-2021-0039
Article Title

Review of mechanical vapour compression refrigeration system Part 2: performance challenge

ERA Journal ID36527
Article CategoryArticle
AuthorsMahmood, R. A. (Author), Ali, O. M. (Author), Al-Janabi, A. (Author), Al-Doori, G. (Author) and Noor, M. M. (Author)
Journal TitleInternational Journal of Applied Mechanics and Engineering
Journal Citation26 (3), pp. 119-130
Number of Pages12
Year2021
Place of PublicationPoland
ISSN1425-1655
1734-4492
Digital Object Identifier (DOI)https://doi.org/10.2478/ijame-2021-0039
Web Address (URL)https://sciendo.com/article/10.2478/ijame-2021-0039
Abstract

Reducing energy consumption and providing high performance for a vapour compression refrigeration system are big challenges that need more attention and investigation. This paper provides an extensive review of experimental and theoretical studies to present the vapour compression refrigeration system and its modifications that can be used to improve system's performance and reduce its energy consumption. This paper also presents the challenges that can be considered as a gab of research for the future works and investigations. Cooling capacity, refrigerant effect, energy consumption can be improved by using vapour injection technique, natural working fluid, and heat exchanger. Based on the outcome of this paper, vapour injection technique using natural refrigerant such as water can provide ultimate friendly refrigeration system. Future vision for the vapour compression refrigeration system and its new design technique using Computational Fluid Dynamic (CFD) is also considered and presented.

Keywordsvapour compression, refrigeration systems, cycle, coefficient of performance (COP).
Contains Sensitive ContentDoes not contain sensitive content
ANZSRC Field of Research 2020401799. Mechanical engineering not elsewhere classified
Byline AffiliationsSchool of Mechanical and Electrical Engineering
University of Zakho, Iraq
Sultan Qaboos University, Oman
International College of Engineering and Management, Oman
University of Malaysia Pahang, Malaysia
Institution of OriginUniversity of Southern Queensland
Permalink -

https://research.usq.edu.au/item/q6q71/review-of-mechanical-vapour-compression-refrigeration-system-part-2-performance-challenge

Download files


Published Version
10.2478_ijame-2021-0039.pdf
License: CC BY 4.0
File access level: Anyone

  • 160
    total views
  • 84
    total downloads
  • 2
    views this month
  • 1
    downloads this month

Export as

Related outputs

Epidemiological passport system requirements: a roadmap for international travel and tourism recovery
Ali, Omar, Ashtaiwi, AbdulAdhim, Jaradat, Ashraf and Soar, Jeffrey. 2024. "Epidemiological passport system requirements: a roadmap for international travel and tourism recovery." Cogent Social Sciences. 10 (1). https://doi.org/10.1080/23311886.2024.2364518
The Simulation of Biogas Combustion in Top Open Burner
Selvam, A., Noor, M.M., Norhafana, M., Ihsan, C.K., Khalid, A., Mahmood, R.A., Harikrishnan, S. and Nayak, S.. 2024. "The Simulation of Biogas Combustion in Top Open Burner." 7th International Conference on Mechanical Engineering Research 2023 (ICMER 2023). Kuantan, Malaysia 12 - 13 Sep 2023 United Kingdom . IOP Publishing. https://doi.org/10.1088/1742-6596/2688/1/012023
The effects of artificial intelligence applications in educational settings: Challenges and strategies
Ali, Omar, Murray, Peter A., Momin, Mujtaba, Dwivedi, Yogesh K. and Howell, Tegwen. 2024. "The effects of artificial intelligence applications in educational settings: Challenges and strategies." Technological Forecasting and Social Change. 199. https://doi.org/10.1016/j.techfore.2023.123076
The impact of technological innovation on marketing: Individuals, organizations and environment - A systematic review
Ali, Omar, Osmanaj, Valmira, Alryalat, Mohammad, Chimhundu, Ranga and Dwivedi, Yogesh K.. 2023. "The impact of technological innovation on marketing: Individuals, organizations and environment - A systematic review." Economic Research. 26 (3). https://doi.org/10.1080/1331677X.2023.2210661
Design of DC solar water pump for farmers in the Kurdistan region of Iraq
Mahmood, Raid A., Musa, Veyan A., Kassim, Muna S., Saleh, Khalid, Mahmood, Sajid A., Mahmood, Qaid A., Hassan, Amer M., Al-Manea, Ahmed R. and Abdulkareem, Lokman A.. 2023. "Design of DC solar water pump for farmers in the Kurdistan region of Iraq." 2nd International Conference on Engineering and Advanced Technology (ICEAT2022) . Istanbul, Turkey 28 - 29 Mar 2022 United States. AIP Publishing. https://doi.org/10.1063/5.0149197
The knowledge and innovation challenges of ChatGPT: A scoping review
Ali, Omar, Murray, Peter, Momin, Mujtaba and Al-Anzi, Fawaz S.. 2023. "The knowledge and innovation challenges of ChatGPT: A scoping review." Technology in Society. 75. https://doi.org/https://doi.org/10.1016/j.techsoc.2023.102402
The application of a single slope solar still in a refinery wastewater treatment: An experimental study
Al-Manea, Ahmed, Hammoody, Idrees, Alturki, Salwan Fadhil, Al-Shamani, Ali Najah, Wadday, Ahmed, Mahmood, Raid A. and Naeem, Haider Tawfiq. 2023. "The application of a single slope solar still in a refinery wastewater treatment: An experimental study." 1st International Conference on Achieving the Sustainable Development Goals. Istanbul, Turkey 06 202 - 07 Jun 2022 United States. AIP Publishing. https://doi.org/10.1063/5.0135973
Impact of Surface Temperature of a Photovoltaic Solar Panel on Voltage Production
Al-Doori, Ghassan Fadil, Mahmood, Raid Ahmed, Al-Janabi, Abdullah, Hassan, Amer Mahmood and Chala, Girma T.. 2023. "Impact of Surface Temperature of a Photovoltaic Solar Panel on Voltage Production." Sulaiman, Shaharin Anwar (ed.) Energy and Environment in the Tropics. Singapore. Springer. pp. 81–93
A systematic literature review of artificial intelligence in the healthcare sector: Benefits, challenges, methodologies, and functionalities
Ali, Omar, Abdelbaki, Wiem, Shrestha, Anup, Elbasi, Ersin, Ali, Mohammad Abdallah and Dwivedi, Yogesh K. 2023. "A systematic literature review of artificial intelligence in the healthcare sector: Benefits, challenges, methodologies, and functionalities." Journal of Innovation and Knowledge. 8 (1), pp. 1-19. https://doi.org/10.1016/j.jik.2023.100333
A review of the key challenges of non-fungible tokens
Ali, Omar, Momin, Mujtaba, Shrestha, Anup, Das, Ronnie, Alhajj, Fadia and Dwivedi, Yogesh K.. 2023. "A review of the key challenges of non-fungible tokens." Technological Forecasting and Social Change. 187, pp. 1-13. https://doi.org/10.1016/j.techfore.2022.122248
Experimental Investigation of Two-Phase Flow Patterns in a Vertical to Horizontal Bend Pipe Using Wire-Mesh Sensor
Abdulkareem, Lokman A., Musa, Veyan A., Mahmood, Raid A. and Hasso, Ezideen A.. 2021. "Experimental Investigation of Two-Phase Flow Patterns in a Vertical to Horizontal Bend Pipe Using Wire-Mesh Sensor." Revista de Chimie. 71 (12), pp. 18-33. https://doi.org/10.37358/Rev.Chim.1949
CFD Simulations and Experimental Observation for Air-Water Two-phase Flow in a Vertical Pipe
Mahmood, Raid A., Saleh, Khalid, Musa, Veyan A., Massoud, Enass, Al-Lwayzy, Saddam H., Ibrahim, Ahmed Khalid, Mohammed, Ali Ghazi and Abdulkareem, Lokman A.. 2022. "CFD Simulations and Experimental Observation for Air-Water Two-phase Flow in a Vertical Pipe." Gongcheng Kexue yu Jishu. 54 (6), pp. 2363-2375.
Assessment of Densified Fuel Quality Parameters: A Case Study for Wheat Straw Pellet
Nath, Bidhan, Chen, Guangnan, Bowtell, Les and Mahmood, Raid Ahmed. 2023. "Assessment of Densified Fuel Quality Parameters: A Case Study for Wheat Straw Pellet." Journal of Bioresources and Bioproducts. 8 (1), pp. 45-58. https://doi.org/10.1016/j.jobab.2022.10.001
Evaluating Organizational Level IT Innovation Adoption Factors among Global Firms
Ali, Omar, Murray, Peter A, Shahnawaz, Muhammed, Dwivedi, Yogesh K and Rashiti, Shqipe. 2022. "Evaluating Organizational Level IT Innovation Adoption Factors among Global Firms." Journal of Innovation and Knowledge. 7 (3), pp. 1-14. https://doi.org/10.1016/j.jik.2022.100213
Blockchain technology enables healthcare data management and accessibility
Ali, Omar, Jaradat, Ashraf, Ally, Mustafa and Rotabi, Sareh. 2022. "Blockchain technology enables healthcare data management and accessibility." Muthu, Subramanian Senthilkannan (ed.) Blockchain technologies for sustainability. Singapore. Springer. pp. 91-118
An Evaluation of Key Adoption Factors towards Using the Fog Technology
Ali, Omar, Shrestha, Anup, Jaradat, Ashraf and Al-Ahmad, Ahmad. 2022. "An Evaluation of Key Adoption Factors towards Using the Fog Technology." Big Data and Cognitive Computing. 6 (3), pp. 1-36. https://doi.org/10.3390/bdcc6030081
Experimental Investigation of Coolant Side Characteristic on the Performance of Air-Cooled Condenser Structured by Horizontal Flattened Tube
Kamil, Mohammed Gh. Mohammed, Kassim, Muna S. and Mahmood, Raid Ahmed. 2022. "Experimental Investigation of Coolant Side Characteristic on the Performance of Air-Cooled Condenser Structured by Horizontal Flattened Tube." International Journal of Heat and Technology (Calore e Tecnologia). 40 (3), pp. 828-836. https://doi.org/10.18280/ijht.400323
Modeling of Heat Transfer and Steam Condensation Inside a Horizontal Flattened Tube
Kamil, M. Gh. Mohammed, Kassim, M. S., Mahmood, R. A. and Mahdi, L. AZ. 2022. "Modeling of Heat Transfer and Steam Condensation Inside a Horizontal Flattened Tube." Fluid Dynamics & Materials Processing. 18 (4), pp. 1-14. https://doi.org/10.32604/fdmp.2022.018938
Augmentation of convection heat transfer from a horizontal cylinder in a vented square enclosure with variation of lower opening size
Ali, Omar M., Mahmood, Raid A. and Al-Brifkani, Mohammed W.. 2022. "Augmentation of convection heat transfer from a horizontal cylinder in a vented square enclosure with variation of lower opening size." Thermal Science. 26 (3), pp. 2027-2041. https://doi.org/10.2298/TSCI201119176A
Two-Phase Flow Development of R134a in a Horizontal Pipe: Computational Investigation
Mahmood, Raid A., Saleh, Khalid, Musa, Veyan A., Massoud, Enass, Sharifian-Barforoush, Ahmad and Abdulkareem, Lokman A.. 2021. "Two-Phase Flow Development of R134a in a Horizontal Pipe: Computational Investigation." International Journal of Heat and Technology (Calore e Tecnologia). 39 (5), pp. 1532-1540. https://doi.org/10.18280/ijht.390515
Challenges and issues that are perceived to influence cloud computing adoption in local government councils
Ali, Omar, Soar, Jeffrey and Yong, Jianming. 2017. "Challenges and issues that are perceived to influence cloud computing adoption in local government councils." 21st International Conference on Computer Supported Cooperative Work in Design (CSCWD 2017). Wellington, New Zealand 26 - 28 Apr 2017 https://doi.org/10.1109/CSCWD.2017.8066659
Experimental comparison between wire mesh and electrical capacitance tomography sensors to predict a two-phase flow behaviour and patterns in inclined pipe
Hameed, Ali I., Abdulkareem, Lokman A. and Mahmood, Radi A.. 2021. "Experimental comparison between wire mesh and electrical capacitance tomography sensors to predict a two-phase flow behaviour and patterns in inclined pipe." Technium. 3 (5), pp. 49-63.
Making investment decisions on RFID technology: an evaluation of key adoption factors in construction firms
Mabad, Tarik, Ali, Omar, Ally, Mustafa, Wamba, Samuel Fosso and Chan, Ka Ching. 2021. "Making investment decisions on RFID technology: an evaluation of key adoption factors in construction firms." IEEE Access. 9, pp. 36937-36954. https://doi.org/10.1109/ACCESS.2021.3063301
Flow Patterns of Oil-Gas and Pressure Gradients in Near-Horizontal Flow Pipeline: Experimental Investigation Using Differential Pressure Transducers
Musa, Veyan A., Mahmood, Raid A., Khalifa, Shwan M. Noori, Ali, Omar M. and Abdulkareem, Lokman A.. 2021. "Flow Patterns of Oil-Gas and Pressure Gradients in Near-Horizontal Flow Pipeline: Experimental Investigation Using Differential Pressure Transducers." International Journal of Heat and Technology (Calore e Tecnologia). 39 (2), pp. 621-628. https://doi.org/10.18280/ijht.390233
Effect of Radiation on Natural Convection Heat Transfer from Heated Horizontal Cylinder in Vented Enclosure
Ali, Omar Mohammed and Mahmood, Raid Ahmed. 2021. "Effect of Radiation on Natural Convection Heat Transfer from Heated Horizontal Cylinder in Vented Enclosure." 3rd International Conference on Recent Innovations in Engineering (ICRIE 2020)IOP Conference Series: Materials Science and Engineering. United Kingdom. Informa UK(IOP Books). https://doi.org/10.1088/1757-899X/978/1/012030
CFD numerical and experimental investigation of two-phase flow development after an expansion device in a horizontal pipe
Mahmood, Raid Ahmed, Buttsworth, David, Malpress, Ray and Sharifian-Barforoush, Ahmed. 2021. "CFD numerical and experimental investigation of two-phase flow development after an expansion device in a horizontal pipe." Journal of Thermal Engineering. 7 (1), pp. 307- 323. https://doi.org/10.18186/thermal.850672
Intrinsic and extrinsic attributes that drive Muslim consumer purchase behavior: A study in the context of Western imported food
Bukhari, Syed Faheem Hassan, Woodside, Frances M., Hassan, Rumman, Ali, Omar Massoud Salim Hassan, Hussain, Saima and Waqas, Rabail. 2020. "Intrinsic and extrinsic attributes that drive Muslim consumer purchase behavior: A study in the context of Western imported food." Journal of Islamic Marketing. 12 (1), pp. 70-94. https://doi.org/10.1108/JIMA-01-2018-0004
Experimental and numerical investigation of two-phase flow orientation direction change on a vertical flash tank separator
Mahmood, Raid Ahmed, Buttsworth, David and Malpress, Ray. 2019. "Experimental and numerical investigation of two-phase flow orientation direction change on a vertical flash tank separator." ISER 460th International Conference on Heat Transfer and Fluid Flow (ICHTFF 2019). Brisbane, Australia 08 - 09 Jan 2019
Assessment of Complexity in Cloud Computing Adoption: a Case Study of Local Governments in Australia
Ali, Omar, Shrestha, Anup, Ghasemaghaei, Maryam and Beydoun, Ghassan. 2022. "Assessment of Complexity in Cloud Computing Adoption: a Case Study of Local Governments in Australia." Information Systems Frontiers: a journal of research and innovation. 24 (2), pp. 595-617. https://doi.org/10.1007/s10796-021-10108-w
The state of play of blockchain technology in the financial services sector: A systematic literature review
Ali, Omar, Ally, Mustafa, Clutterbuck, . and Dwivedi, Yogesh. 2020. "The state of play of blockchain technology in the financial services sector: A systematic literature review." International Journal of Information Management. 54, pp. 1-19. https://doi.org/10.1016/j.ijinfomgt.2020.102199
CFD Instraction Guide to Simulate Two-Phase Flow Separation in A Vertical T-Junction Separator
Mahmood, Raid Ahmed. 2019. "CFD Instraction Guide to Simulate Two-Phase Flow Separation in A Vertical T-Junction Separator." International Journal of Advances in Science, Engineering and Technology (IJASEAT). 7 (2 (Special issue 1)), pp. 40-44.
Mechanical Vapour Compression Refrigeration System: Review Part 1: Environment Challenge
Mahmood, Raid, Ali, Omar M. and Noor, M. M.. 2020. "Mechanical Vapour Compression Refrigeration System: Review Part 1: Environment Challenge." International Journal of Applied Mechanics and Engineering. 25 (4), pp. 130-147. https://doi.org/10.2478/ijame-2020-0054
CFD Assessment and Experimental Investigation of the Liquid Separation Efficiency Enhancements in a Vertical Gravity Separator
Mahmood, Raid Ahmed. 2020. "CFD Assessment and Experimental Investigation of the Liquid Separation Efficiency Enhancements in a Vertical Gravity Separator." International Journal of Air-Conditioning and Refrigeration. 28 (3), pp. 2050021-1. https://doi.org/10.1142/S2010132520500212
Investigation study of the inlet to body diameter ratio of a vertical flash tank separator using computational fluid dynamic (CFD)
Mahmood, Raid Ahmed. 2019. "Investigation study of the inlet to body diameter ratio of a vertical flash tank separator using computational fluid dynamic (CFD)." GSRD International Conference on Science, Engineering and Technology (ICSET 2019). Amman, Jordan 20 Feb 2019 Amman, Jordan.
CFD Instraction Guide to Simulate Two-Phase Flow Separation in a Vertical T-junction Separator
Mahmood, Raid Ahmed. 2019. "CFD Instraction Guide to Simulate Two-Phase Flow Separation in a Vertical T-junction Separator." International Institute of Engineers & Researchers 576th International Conference on Recent Innovations in Engineering and Technology (ICRIET-2019). Istanbul, Turkey 06 - 07 Feb 2019 Khandagiri, India.
Computational and Experimental Investigation of the Vertical Flash Tank Separator Part 1: Effect of Parameters on Separation Efficiency
Mahmood, Raid Ahmed, Buttsworth, David and Malpress, Ray. 2019. "Computational and Experimental Investigation of the Vertical Flash Tank Separator Part 1: Effect of Parameters on Separation Efficiency." International Journal of Air-Conditioning and Refrigeration. 27 (1), pp. 1950005-1. https://doi.org/10.1142/S2010132519500056
Assessment of a Sustainable Building using Eco-Friendly Insulation Materials
Mahmood, Raid Ahmed. 2020. "Assessment of a Sustainable Building using Eco-Friendly Insulation Materials." International Journal of Advances in Mechanical and Civil Engineering (IJAMCE). 7 (2), pp. 16-20.
Case study of liquid suction heat exchanger in a mechanical refrigeration system using alternative refrigerants
Mahmood, Raid Ahmed. 2020. "Case study of liquid suction heat exchanger in a mechanical refrigeration system using alternative refrigerants." International Journal of Engineering and Technology(Uae). 9 (3), pp. 644-649. https://doi.org/10.14419/ijet.v9i3.30777
Cloud computing technology adoption: an evaluation of key factors in local governments
Ali, Omar, Shrestha, Anup, Osmanaj, Valmira and Muhammed, Shahnawaz. 2021. "Cloud computing technology adoption: an evaluation of key factors in local governments." Information Technology and People. 34 (2), pp. 666-703. https://doi.org/10.1108/ITP-03-2019-0119
Experimental and Numerical Investigation of Two-phase Flow Orientation Direction Change on a Vertical Flash Tank Separator
Mahmood, Raid Ahmed, Buttsworth, David and Malpress, Ray. 2019. "Experimental and Numerical Investigation of Two-phase Flow Orientation Direction Change on a Vertical Flash Tank Separator ." International Journal of Management and Applied Science (IJMAS). 5 (4), pp. 25-29.
Computational and experimental investigation of using an extractor in a vertical gravitational flash tank separator
Mahmood, R. A., Buttsworth, D. and Malpress, R.. 2019. "Computational and experimental investigation of using an extractor in a vertical gravitational flash tank separator." International Journal of Automotive and Mechanical Engineering. 16 (2), pp. 6706-6722.
Assessing information security risks in the cloud: a case study of Australian local government authorities
Ali, Omar, Shrestha, Anup, Chatfield, Akemi and Murray, Peter A.. 2020. "Assessing information security risks in the cloud: a case study of Australian local government authorities." Government Information Quarterly: an international journal of information technology management, policies, and practices. 37 (1). https://doi.org/10.1016/j.giq.2019.101419
Improving the retailer industry performance through RFID technology: a case study of Wal-Mart and Metro Group
Ali, Omar and Hingst, Ray. 2018. "Improving the retailer industry performance through RFID technology: a case study of Wal-Mart and Metro Group." Krishnan, Archana (ed.) Cases on quality initiatives for organizational longevity. United States. IGI Global. pp. 196-220
Cloud computing-enabled healthcare opportunities, issues, and applications: a systematic review
Ali, Omar, Shrestha, Anup, Soar, Jeffrey and Wamba, Samuel Fosso. 2018. "Cloud computing-enabled healthcare opportunities, issues, and applications: a systematic review." International Journal of Information Management. 43, pp. 146-158. https://doi.org/10.1016/j.ijinfomgt.2018.07.009
Perceived potential for value creation from cloud computing: a study of the Australian regional government sector
Ali, Omar, Soar, Jeffrey and Shrestha, Anup. 2018. "Perceived potential for value creation from cloud computing: a study of the Australian regional government sector." Behaviour and Information Technology. 37 (12), pp. 1157-1176. https://doi.org/10.1080/0144929X.2018.1488991
Experimental and computational investigation of gravity separation in a vertical flash tank separator
Mahmood, Raid Ahmed. 2018. Experimental and computational investigation of gravity separation in a vertical flash tank separator . PhD Thesis Doctor of Philosophy. University of Southern Queensland. https://doi.org/10.26192/5c0da776f69cf
Analysis of the Total Cost of Ownership for Cloud Computing Technology Adoption: A Case Study of Regional Municipal Government Sector
Ali, Omar and Shrestha, Anup. 2017. "Analysis of the Total Cost of Ownership for Cloud Computing Technology Adoption: A Case Study of Regional Municipal Government Sector." Riemer, Kai, Indulska, Marta and Tuunainen, Virpi Kristiina (ed.) 28th Australasian Conference on Information Systems (ACIS 2017). Hobart, Australia 04 - 06 Dec 2017 Hobart, Australia.
Level of policy for cloud computing adoption in Australian regional municipal governments: an exploratory study
Ali, Omar, Yong, Jianming, Soar, Jeffrey and McClymont, Hoda. 2015. "Level of policy for cloud computing adoption in Australian regional municipal governments: an exploratory study." Arabnia, Hamid R., Gravvanis, George A., Solo, Ashu M. G. and Tinetti, Fernando G. (ed.) 2015 International Conference on Grid & Cloud Computing and Applications (GCA'15). Las Vegas, United States 27 - 30 Jul 2015 United States.
Managing the risks of data security and privacy in the cloud: a shared responsibility between the cloud service provider and the client organisation
Lane, Michael, Shrestha, Anup and Ali, Omar. 2017. "Managing the risks of data security and privacy in the cloud: a shared responsibility between the cloud service provider and the client organisation." Bright Internet Global Summit 2017. Seoul, Korea 08 - 10 Dec 2017
The study of air fuel ratio for open furnace MILD combustion of biogas on bluff-body burner
Noor, M. M., Wandel, Andrew P. and Yusaf, T. F.. 2012. "The study of air fuel ratio for open furnace MILD combustion of biogas on bluff-body burner." 2012 Southern Regional Engineering Conference (SREC 2012). Toowoomba, Australia 01 Sep 2012 Canberra, Australia.
The development of MILD combustion open burner experimental setup
Noor, M. M., Wandel, Andrew P. and Yusaf, Talal. 2013. "The development of MILD combustion open burner experimental setup." Ishak, Mahadzir and Rahman, Md. Mustafizur (ed.) 2nd International Conference of Mechanical Engineering Research (ICMER 2013). Pahang, Malaysia 01 - 03 Jul 2013 Pahang, Malaysia.
Detail guide for CFD on the simulation of biogas combustion in bluff-body mild burner
Noor, M. M., Wandel, Andrew P. and Yusaf, Talal. 2013. "Detail guide for CFD on the simulation of biogas combustion in bluff-body mild burner." Ishak, Mahadzir and Rahman, Md. Mustafizur (ed.) 2nd International Conference of Mechanical Engineering Research (ICMER 2013). Pahang, Malaysia 01 - 03 Jul 2013 Pahang, Malaysia.
Mild combustion: the future for lean and clean combustion
Yusaf, Talal, Noor, M. M. and Wandel, Andrew P.. 2013. "Mild combustion: the future for lean and clean combustion." Ishak, Mahadzir and Rahman, Md. Mustafizur (ed.) 2nd International Conference of Mechanical Engineering Research (ICMER 2013). Pahang, Malaysia 01 - 03 Jul 2013 Pahang, Malaysia.
Improved media management through cloud computing technology
Ali, Omar, Soar, Jeffrey and Yong, Jianming. 2016. "Improved media management through cloud computing technology." 20th IEEE International Conference on Computer Supported Cooperative Work in Design (CSCWD 2016). Nanchang, China 04 - 06 May 2016 United States. https://doi.org/10.1109/CSCWD.2016.7566004
The perceived benefits of cloud computing technology for regional municipal governments and barriers to adoption
Ali, Omar Massoud Salim Hassan. 2016. The perceived benefits of cloud computing technology for regional municipal governments and barriers to adoption. PhD Thesis Doctor of Philosophy. University of Southern Queensland.
Cloud computing adoption in regional councils
Ali, Omar, Soar, Jeffrey and Yong, Jianming. 2016. Cloud computing adoption in regional councils. University of Southern Queensland.
An investigation of anticipated benefits of cloud computing adoption in Australian regional municipal governments
Ali, Omar, Soar, Jeffrey and Yong, Jianming. 2015. "An investigation of anticipated benefits of cloud computing adoption in Australian regional municipal governments." The Services Transactions on Cloud Computing. 3 (3), pp. 13-24.
Factors to be considered in Cloud computing adoption
Ali, Omar, Soar, Jeffrey, Yong, Jianming and Tao, Xiaohui. 2016. "Factors to be considered in Cloud computing adoption." Web Intelligence. 14 (4), pp. 309-323. https://doi.org/10.3233/WEB-160347
Mixing layer effects on the entrainment ratio in steam ejectors through ideal gas computational simulations
Ariafar, Kavous, Buttsworth, David, Al-Doori, Ghassan and Sharifi, Navid. 2016. "Mixing layer effects on the entrainment ratio in steam ejectors through ideal gas computational simulations." Energy. 95, pp. 380-392. https://doi.org/10.1016/j.energy.2015.12.027
Collaborative cloud computing adoption in Australian regional municipal government: an exploratory study
Ali, Omar, Soar, Jeffrey, Yong, Jianming, McClymont, Hoda and Angus, Daniel. 2015. "Collaborative cloud computing adoption in Australian regional municipal government: an exploratory study." Fortino, Giancarlo, Shen, Weiming, Barthès, Jean-Paul A., Luo, Junzhou, Li, Wenfeng, Ochoa, Sergio F., Abel, Marie-Hélène, Guerrieri, Antonio and Ramos, Milton Pires (ed.) 19th IEEE International Conference on Computer Supported Cooperative Work in Design (CSCWD 2015). Calabria, Italy 06 - 08 May 2015 United States. https://doi.org/10.1109/CSCWD.2015.7231017
An investigation of the challenges and issues influencing the adoption of cloud computing in Australian regional municipal governments
Ali, Omar, Soar, Jeffrey and Yong, Jianming. 2016. "An investigation of the challenges and issues influencing the adoption of cloud computing in Australian regional municipal governments." Journal of Information Security and Applications. 27-28, pp. 19-34. https://doi.org/10.1016/j.jisa.2015.11.006
Anticipated benefits of cloud computing adoption in Australian regional municipal governments: an exploratory study
Ali, Omar, Soar, Jeffrey, McClymont, Hoda, Yong, Jianming and Biswas, Jit. 2015. "Anticipated benefits of cloud computing adoption in Australian regional municipal governments: an exploratory study." 19th Pacific Asia Conference on Information Systems (PACIS 2015). Singapore 05 - 09 Jul 2015
Effect of mixing on the performance of wet steam ejectors
Ariafar, Kavous, Buttsworth, David, Al-Doori, Ghassan and Malpress, Ray. 2015. "Effect of mixing on the performance of wet steam ejectors." Energy. 93 (2), pp. 2030-2041. https://doi.org/10.1016/j.energy.2015.10.082
Exploratory study to investigate the factors influencing the adoption of cloud computing in Australian regional municipal governments
Ali, Omar, Soar, Jeffrey, Yong, Jianming and McClymont, Hoda. 2015. "Exploratory study to investigate the factors influencing the adoption of cloud computing in Australian regional municipal governments." Journal of Art Media and Technology. 1 (1), pp. 1-13.
An investigation of the main factors to be considered in cloud computing adoption in Australian regional local councils
Ali, Omar, Soar, Jeffrey and Yong, Jianming. 2015. "An investigation of the main factors to be considered in cloud computing adoption in Australian regional local councils." Journal of Contemporary Issues in Business and Government. 21 (1), pp. 72-93. https://doi.org/10.7790/cibg.v21i1.23
Impact of Cloud computing technology on e-government
Ali, Omar, Soar, Jeffrey and Yong, Jianming. 2014. "Impact of Cloud computing technology on e-government." Dregvaite, Giedre and Damasevicius, Robertas (ed.) 20th International Conference on Information and Software Technologies (ICIST 2014). Druskininkai, Lithuania 09 - 10 Oct 2014 Heidelberg, Germany. https://doi.org/10.1007/978-3-319-11958-8_22
Challenges and issues within Cloud computing technology
Ali, Omar and Soar, Jeffrey. 2014. "Challenges and issues within Cloud computing technology." Zimmermann, Wolf, Lee, Yong Woo and Reich, Christoph (ed.) 5th International Conference on Cloud Computing, GRIDs, and Virtualization (IARIA 2014). Venice, Italy 25 - 29 May 2014 Wilmington, DE. United States. https://doi.org/10.13140/2.1.3210.3369
Pitot pressure measurements in a supersonic steam jet
Al-Doori, Ghassan and Buttsworth, David R.. 2014. "Pitot pressure measurements in a supersonic steam jet." Experimental Thermal and Fluid Science. 58, pp. 56-61. https://doi.org/10.1016/j.expthermflusci.2014.05.012
Experimental and numerical study of MILD combustion in an open-end furnace with exhaust gas recirculation using methane and biogas
Noor, Muhamad Mat. 2015. Experimental and numerical study of MILD combustion in an open-end furnace with exhaust gas recirculation using methane and biogas. PhD Thesis Doctor of Philosophy. University of Southern Queensland.
Air fuel ratio study for mixture of biogas and hydrogen on mild combustion
Noor, M. M., Wandel, Andrew P. and Yusaf, Talal. 2014. "Air fuel ratio study for mixture of biogas and hydrogen on mild combustion." International Journal of Automotive and Mechanical Engineering. 10 (1), pp. 2144-2154. https://doi.org/10.15282/ijame.9.2013.29.0180
Effect of air-fuel ratio on temperature distribution and pollutants for biogas MILD combustion
Noor, M. M., Wandel, Andrew P. and Yusaf, Talal. 2014. "Effect of air-fuel ratio on temperature distribution and pollutants for biogas MILD combustion." International Journal of Automotive and Mechanical Engineering. 10 (1), pp. 1980-1992. https://doi.org/10.15282/ijame.10.2014.15.0166
The simulation of biogas combustion in a MILD burner
Noor, M. M., Wandel, Andrew P. and Yusaf, Talal. 2014. "The simulation of biogas combustion in a MILD burner." Journal of Mechanical Engineering and Sciences. 6 (1), pp. 995-1013.
MILD combustion: the future for lean and clean combustion technology
Noor, M. M., Wandel, Andrew P. and Yusaf, Talal. 2014. "MILD combustion: the future for lean and clean combustion technology." International Review of Mechanical Engineering. 8 (1), pp. 251-257.
Design and development of mild combustion burner
Noor, M. M., Wandel, Andrew P. and Yusaf, Talal. 2013. "Design and development of mild combustion burner." Journal of Mechanical Engineering and Sciences. 5, pp. 662-676. https://doi.org/10.15282/jmes.5.2013.13.0064
Effect of compressed natural gas mixing on the engine performance and emissions
Yusaf, T., Baker, P., Hamawand, I. and Noor, M. M.. 2013. "Effect of compressed natural gas mixing on the engine performance and emissions." International Journal of Automotive and Mechanical Engineering. 8 (1), pp. 1416-1429.
Analysis of recirculation zone and ignition position of non-premixed bluff-body for biogas mild combustion
Noor, M. M., Wandel, Andrew P. and Yusaf, Talal. 2013. "Analysis of recirculation zone and ignition position of non-premixed bluff-body for biogas mild combustion." International Journal of Automotive and Mechanical Engineering. 8 (1), pp. 1176-1186.
The analysis of recirculation zone and ignition position of non-premixed bluff-body for biogas mild combustion
Noor, M. M., Wandel, Andrew P. and Yusaf, Talal. 2013. "The analysis of recirculation zone and ignition position of non-premixed bluff-body for biogas mild combustion." Ishak, Mahadzir and Rahman, Md. Mustafizur (ed.) 2nd International Conference of Mechanical Engineering Research (ICMER 2013). Pahang, Malaysia 01 - 03 Jul 2013 Pahang, Malaysia.
Numerical study of oxygen dilution and temperature distribution of biogas combustion in Bluff-body MILD burner
Noor, M. M., Wandel, Andrew P. and Yusaf, Talal. 2013. "Numerical study of oxygen dilution and temperature distribution of biogas combustion in Bluff-body MILD burner." Masri, Assaad (ed.) 7th Australian Combustion Symposium (ACS 2013). Perth, Australia 06 - 08 Nov 2013 Perth, Australia.
The air fuel ratio study for the mixture of biogas and hydrogen on mild combustion
Noor, M. M., Wandel, Andrew P. and Yusaf, Talal. 2013. "The air fuel ratio study for the mixture of biogas and hydrogen on mild combustion." 3rd Malaysian Postgraduate Conference (MPC 2013). Sydney, Australia 04 - 05 Jul 2013 Sydney, Australia.
Discretization of three dimensional non-uniform grid: conditional moment closure elliptic equation using finite difference method
Noor, M. M., Wandel, Andrew P. and Yusaf, Talal. 2013. "Discretization of three dimensional non-uniform grid: conditional moment closure elliptic equation using finite difference method." 3rd Malaysian Postgraduate Conference (MPC 2013). Sydney, Australia 04 - 05 Jul 2013 Sydney, Australia.
The potential of wind and solar energy in Malaysia east coast: preliminary study at Universiti Malaysia Pahang (UMP)
Amirruddin, A. K., Noor, M. M., Kadirgama, K. and Sharma, K. V.. 2012. "The potential of wind and solar energy in Malaysia east coast: preliminary study at Universiti Malaysia Pahang (UMP) ." Brebbia, C. A. and Zubir, S. S. (ed.) 3rd International Conference on Management of Natural Resources, Sustainable Development and Ecological Hazards: Ravage of the Planet III (RAV 2011) . Selangor, Malaysia 13 - 15 Dec 2011 Southampton, UK .
A review of mild combustion and open furnace design consideration
Noor, M. M., Wandel, Andrew P. and Yusaf, Talal. 2012. "A review of mild combustion and open furnace design consideration." International Journal of Automotive and Mechanical Engineering. 6 (1), pp. 730-754.
Investigation of refrigeration system steam ejector performance through experiments and computational simulations
Al-Doori, Ghassan Fadil Lattif. 2013. Investigation of refrigeration system steam ejector performance through experiments and computational simulations. PhD Thesis Doctor of Philosophy. University of Southern Queensland.
Investigation of Biogas Moderate or Intense Low Oxygen Dilution (MILD) combustion on open furnace bluff-body burner
Noor, M. M., Wandel, Andrew P. and Yusaf, T. F.. 2012. "Investigation of Biogas Moderate or Intense Low Oxygen Dilution (MILD) combustion on open furnace bluff-body burner." Noor, M. M., Baker, Paul and Yusaf, Talal F. (ed.) USQ Combustion Meeting 2012 (29th August). Toowoomba, Australia 29 Aug 2012 Toowoomba, Australia.
Modelling of non-premixed turbulent combustion of hydrogen using conditional moment closure method
Noor, M. M., Hairuddin, A. Aziz, Wandel, Andrew P. and Yusaf, T. F.. 2012. "Modelling of non-premixed turbulent combustion of hydrogen using conditional moment closure method." IOP Conference Series: Materials Science and Engineering. 36 (1), pp. 1-17. https://doi.org/10.1088/1757-899X/36/1/012036
The modelling of the effect of air fuel ratio on unburned hydrocarbons for MILD combustion
Noor, M. M., Wandel, Andrew P. and Yusaf, T. F.. 2012. "The modelling of the effect of air fuel ratio on unburned hydrocarbons for MILD combustion." Noor, M. M., Rahman, M. M. and Ismail, J. (ed.) 2nd Malaysian Postgraduate Conference (MPC 2012). Gold Coast, Australia 07 - 09 Jul 2012 Sydney, Australia.
A preliminary study of control parameters for open furnace mild combustion using CFD
Noor, M. M., Wandel, Andrew P. and Yusaf, T. F.. 2012. "A preliminary study of control parameters for open furnace mild combustion using CFD." Noor, M. M., Rahman, M. M. and Ismail, J. (ed.) 2nd Malaysian Postgraduate Conference (MPC 2012). Gold Coast, Australia 07 - 09 Jul 2012 Sydney, Australia.
Mild combustion: a technical review towards open furnace combustion
Noor, M. M., Wandel, Andrew P. and Yusaf, T. F.. 2012. "Mild combustion: a technical review towards open furnace combustion." Noor, M. M., Rahman, M. M. and Ismail, J. (ed.) 2nd Malaysian Postgraduate Conference (MPC 2012). Gold Coast, Australia 07 - 09 Jul 2012 Sydney, Australia.
Numerical investigation of influence of air and fuel dilution for open furnace MILD combustion burner
Noor, M. M., Wandel, Andrew P. and Yusaf, T. F.. 2012. "Numerical investigation of influence of air and fuel dilution for open furnace MILD combustion burner." 2012 Southern Regional Engineering Conference (SREC 2012). Toowoomba, Australia 01 Sep 2012 Canberra, Australia.
The potential of wind and solar energy in Malaysia east coast: preliminary study at Universiti Malaysia Pahang (UMP)
Noor, M. M., Amiruddin, A. K., Kadirgama, K. and Sharma, K. V.. 2011. "The potential of wind and solar energy in Malaysia east coast: preliminary study at Universiti Malaysia Pahang (UMP)." Brebbia, C. A. and Zubir, S. S. (ed.) 3rd International Conference on Energy and Sustainability . Alicante, Spain 11 - 13 Apr 2011 United Kingdom .
Implementation of conditional moment closure using the Taylor expansion and finite differences
Noor, M. M., Hairuddin, A. Aziz, Wandel, Andrew P. and Yusaf, T. F.. 2011. "Implementation of conditional moment closure using the Taylor expansion and finite differences." 1st International Conference of Mechanical Engineering Research (ICMER 2011). Kuantan, Malaysia 05 - 07 Dec 2011 Kuantan, Malaysia.
Experimental study on heat transfer coefficient and friction factor of Al2O3 nanofluid in a packed bed column
Rao, G. Srinivasa, Sharma, K. V., Chary, S. P., Bakar, R. A., Rahman, M. M., Kadirgama, K. and Noor, M. M.. 2011. "Experimental study on heat transfer coefficient and friction factor of Al2O3 nanofluid in a packed bed column." Journal of Mechanical Engineering and Sciences. 1 (1), pp. 1-15.
A hybrid EMST-modified Curl's model for turbulent combustion modelling
Noor, M. M., Wandel, Andrew P. and Yusaf, T. F.. 2011. "A hybrid EMST-modified Curl's model for turbulent combustion modelling." University of Southern Queensland's Research Evening: Showcasing USQ Research (2011). Toowoomba, Australia 17 Nov 2011
Study of random particle interactions for analysis of diffusion lengths in turbulent combustion modelling
Noor, M. M., Yusaf, T. F. and Wandel, Andrew P.. 2011. "Study of random particle interactions for analysis of diffusion lengths in turbulent combustion modelling." Kennedy, Eric, Dlugogorski, Bogdan, Moghtaderi, Behdad and Masri, Assaad (ed.) 11th Australian Combustion Symposium (ACS 2011). Newcastle, Australia 29 Nov - 01 Dec 2011 Sydney, Australia.
Experimental and modeling investigation of the performance characteristics on diesel HCCI with hydrogen additive - a review
Supeni, E. E., Yusaf, Talal, Wandel, Andrew P., Buttsworth, David R. and Noor, M. M.. 2010. "Experimental and modeling investigation of the performance characteristics on diesel HCCI with hydrogen additive - a review." 2nd National Conference in Mechanical Engineering Research and Postgraduate Studies. Kuantan, Malaysia 03 - 04 Dec 2010 Malaysia.
Development of a high pressure compressed natural gas mixer for a 1.5 litre CNG-diesel dual engine
Noor, M. M., Kadirgama, K., Devarajan, R., Rejab, M. R. M., Zuki, N. M. and Yusaf, Talal. 2008. "Development of a high pressure compressed natural gas mixer for a 1.5 litre CNG-diesel dual engine." National Conference on Design and Concurrent Engineering (DECON) 2008. Melaka, Malaysia 28 - 29 Oct 2008 Malaysia.