Imparting ultra-low friction and wear rate to epoxy by the incorporation of microencapsulated lubricant?

Article

Guo, Qing Bing, Lau, Kin-Tak, Zheng, Bing Fa, Rong, Min Zhi and Zhang, Ming Qiu. 2009. "Imparting ultra-low friction and wear rate to epoxy by the incorporation of microencapsulated lubricant?" Macromolecular Materials and Engineering. 294 (1), pp. 20-24. https://doi.org/10.1002/mame.200800257
Article Title

Imparting ultra-low friction and wear rate to epoxy by the incorporation of microencapsulated lubricant?

ERA Journal ID1682
Article CategoryArticle
AuthorsGuo, Qing Bing (Author), Lau, Kin-Tak (Author), Zheng, Bing Fa (Author), Rong, Min Zhi (Author) and Zhang, Ming Qiu (Author)
Journal TitleMacromolecular Materials and Engineering
Journal Citation294 (1), pp. 20-24
Number of Pages5
Year2009
PublisherJohn Wiley & Sons
Place of PublicationWeinheim, Germany
ISSN1438-7492
1439-2054
Digital Object Identifier (DOI)https://doi.org/10.1002/mame.200800257
Web Address (URL)http://onlinelibrary.wiley.com/doi/10.1002/mame.200800257/pdf
Abstract

The incorporation of microcapsules containing lubricant oil into epoxy composites leads to materials with ultra-low friction and wear performance. During sliding wear tests, the capsules are damaged by the asperities of the counterface, releasing the oil to the contact area. The lubrication effect of the released oil and the entrapment of wear particles in the cavities left by the ruptured capsules leads to a significant reduction of both the frictional coefficient and the specific wear rate. The approach provides the merits of fluid lubrication but excludes the drawbacks of external lubrication. A minute amount of lubricant oil is sufficient to improve the tribological properties significantly.

Keywordscomposites; epoxy; friction; microencapsulation; lubricating oils; tribology; wear of materials; wear particles; wear performance; wear rates; wear testing
ANZSRC Field of Research 2020401708. Tribology
401602. Composite and hybrid materials
401609. Polymers and plastics
Public Notes

Files associated with this item cannot be displayed due to copyright restrictions.

Byline AffiliationsSun Yat-sen University, China
Hong Kong Polytechnic University, China
Institution of OriginUniversity of Southern Queensland
Permalink -

https://research.usq.edu.au/item/q0q69/imparting-ultra-low-friction-and-wear-rate-to-epoxy-by-the-incorporation-of-microencapsulated-lubricant

Log in to edit
  • 1856
    total views
  • 9
    total downloads
  • 1
    views this month
  • 0
    downloads this month

Export as

Related outputs

Overview of emerging hybrid and composite materials for space applications
Ince, J.C., Peerzada, M., Mathews, L.D., Pai, A.R., Al‑qatatsheh, A., Abbasi, S., Yin, Y., Hameed, N., Duffy, A.R., Lau, K. and Salim, N.V.. 2023. "Overview of emerging hybrid and composite materials for space applications." Advanced Composites and Hybrid Materials. 6 (4). https://doi.org/10.1007/s42114-023-00678-5
Impact Properties of the Chemically Treated Hemp Fibre Reinforced Polyester Composites
Kabir, Mohammad Mazedul, Al-Haik, Mohammad Yousef, Aldajah, Saud Hamad, Lau, Kin Tak and Wang, Hao. 2020. "Impact Properties of the Chemically Treated Hemp Fibre Reinforced Polyester Composites." Fibers and Polymers. 21 (9), pp. 2098-2110. https://doi.org/10.1007/s12221-020-9630-4
Fabric Parameter Effect on the Mechanical Properties of Woven Hemp Fabric Reinforced Composites as an Alternative to Wood Products
Misnon, I. M., Islam, M. M., Epaarachchi, J. A., Lau, K. T. and Wang, H.. 2016. "Fabric Parameter Effect on the Mechanical Properties of Woven Hemp Fabric Reinforced Composites as an Alternative to Wood Products." Advance Research in Textile Engineering. 1 (1).
Effect of hemp fibre surface treatment on the fibre-matrix interface and the influence of cellulose, hemicellulose and lignin contents on composite strength properties
Kabir, Mohammad Mazedul, Alhaik, Mohammad Yousef, Aldajah, Saud Hamad, Lau, Kin Tak, Wang, Hao and Islam, Md Mainul. 2021. "Effect of hemp fibre surface treatment on the fibre-matrix interface and the influence of cellulose, hemicellulose and lignin contents on composite strength properties." Advances in Materials Science and Engineering. 2021, pp. 1-17. https://doi.org/10.1155/2021/9753779
Europium complex with functionalized carbon nanotubes: a new lanthanide photoluminescence nanomaterial
Li, Xiao-Feng, An, Yan, Lau, Kin-Tak, Li, Wen-Ge and Yin, Yan-Sheng. 2012. "Europium complex with functionalized carbon nanotubes: a new lanthanide photoluminescence nanomaterial." Lau, Alan K.-T., Srivatsan, T. S., Bhattacharyya, Debes, Zhang, Ming Qiu and Ho, Mabel M. P. (ed.) 20th International Symposium on Processing and Fabrication of Advanced Materials (PFAM 20). Hong Kong 15 - 18 Dec 2011 Zurich, Switzerland. https://doi.org/10.4028/www.scientific.net/AMR.410.129
Interfacial bonding in a nanoclay/polymer composite
Chan, Mo-lin, Lau, Kin-Tak and Wong, T. T.. 2012. "Interfacial bonding in a nanoclay/polymer composite." Lau, Alan K.-T., Srivatsan, T. S., Bhattacharyya, Debes, Zhang, Ming Qiu and Ho, Mabel M. P. (ed.) 20th International Symposium on Processing and Fabrication of Advanced Materials (PFAM 20). Hong Kong 15 - 18 Dec 2011 Zurich, Switzerland. https://doi.org/10.4028/www.scientific.net/AMR.410.156
Durability characteristics and property prediction of glass fibre reinforced mixed plastics composites
Bajracharya, Rohan Muni, Manalo, Allan C., Karunasena, Warna and Lau, Kin-tak. 2017. "Durability characteristics and property prediction of glass fibre reinforced mixed plastics composites." Composites Part B: Engineering. 116, pp. 16-29. https://doi.org/10.1016/j.compositesb.2017.02.027
Investigation of the impact properties of glass fibre / HMPP fibre hybrid composite materials for civil infrastructure constructions
Malvern, J. L., Epaarachchi, J. A. and Lau, K. T.. 2011. "Investigation of the impact properties of glass fibre / HMPP fibre hybrid composite materials for civil infrastructure constructions." 18th International Conference on Composite Materials (ICCM-18). Jeju, Korea 21 - 26 Aug 2011 Korea.
Effect of degumming on tussah silk fibre
Ho, M. P., Lau, K. T. and Wang, H.. 2011. "Effect of degumming on tussah silk fibre." Lee, Woo (ed.) 18th International Conference on Composite Materials (ICCM-18). Jeju, Korea 21 - 26 Aug 2011 Seoul, Korea.
Cure shrinkage in epoxy grouts for grouted repairs
Shamsuddoha, Md, Islam, Md Mainul, Aravinthan, Thiru, Manalo, Allan and Lau, Kin-tak. 2013. "Cure shrinkage in epoxy grouts for grouted repairs." Epaarachchi, Jayantha A., Lau, Alan Kin-tak and Leng, Jinsong (ed.) 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013). Gold Coast, Australia 10 - 12 Jul 2013 United States. https://doi.org/10.1117/12.2028085
Selection of hemp fabric as reinforcement in composite materials
Misnon, Mohd Iqbal, Islam, Md Mainul, Epaarachchi, Jayantha Ananda and Lau, Kin-tak. 2014. "Selection of hemp fabric as reinforcement in composite materials." Mashud, Mohammad (ed.) 3rd International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE 2014). Khulna, Bangladesh 26 - 27 Dec 2014 Khulna, Bangladesh.
Experimental investigation on the interfacial adhesion of date palm fibres with epoxy matrix
Alsaeed, T., Alajmi, A., Yousif, B. F., Ku, H. and Lau, Alan Kin-tak. 2012. "Experimental investigation on the interfacial adhesion of date palm fibres with epoxy matrix." Heslehurst, Rikard Benton and Byrne, Ann (ed.) Composites Australia and the CRC for Advanced Composite Structures Conference 2012: Diversity in Composites. Leura, Australia 15 - 16 Mar 2012 Melbourne, Australia.
Woven hemp fabric reinforced vinyl ester composite: effect of water absorption on the mechanical properties degradation
Misnon, Mohd Iqbal, Islam, Md Mainul, Epaarachchi, Jayantha Ananda, Wang, Hao and Lau, Kin-tak. 2016. "Woven hemp fabric reinforced vinyl ester composite: effect of water absorption on the mechanical properties degradation." International Journal of Advances in Science, Engineering and Technology (IJASEAT). 4 (3), pp. 96-101.
Effect of elevated temperature on the tensile properties of recycled mixed plastic waste
Bajracharya, Rohan Muni, Manalo, Allan C., Karunasena, Warna and Lau, Kin-tak. 2014. "Effect of elevated temperature on the tensile properties of recycled mixed plastic waste." Smith, S. T. (ed.) 23rd Australasian Conference on the Mechanics of Structures and Materials (ACMSM23). Byron Bay, Australia 09 - 12 Dec 2014 Lismore, Australia.
Glass fibre and recycled mixed plastic wastes: recent developments and applications
Bajracharya, Rohan M., Manalo, Allan C., Karunasena, Warna and Lau, Kin-tak. 2014. "Glass fibre and recycled mixed plastic wastes: recent developments and applications." Smith, S. T. (ed.) 23rd Australasian Conference on the Mechanics of Structures and Materials (ACMSM23). Byron Bay, Australia 09 - 12 Dec 2014 Australia.
Important aspects of finite element modeling of low density thermo plastic closed cell foams
Thota, N. M., Epaarachchi, J. A. and Lau, K. T.. 2013. "Important aspects of finite element modeling of low density thermo plastic closed cell foams." Mishra, G. C. and Sanskriti, Krishi (ed.) 3rd World Congress on Frontiers of Mechanical, Aerospace and Automotive Engineering (WCFMAAE 2013). New Delhi, India 02 - 03 Feb 2013 New Delhi, India.
Experimental and theoretical studies on the properties of injection moulded glass fibre reinforced mixed plastics composites
Bajracharya, Rohan Muni, Manalo, Allan C., Karunasena, Warna and Lau, Kin-tak. 2016. "Experimental and theoretical studies on the properties of injection moulded glass fibre reinforced mixed plastics composites." Composites Part A: Applied Science and Manufacturing. 84, pp. 393-405. https://doi.org/10.1016/j.compositesa.2016.02.025
Behaviour of new building products from recycled-mixed plastic wastes
Bajracharya, Rohan Muni, Manalo, Allan C., Karunasena, Warna and Lau, Kin-tak. 2015. "Behaviour of new building products from recycled-mixed plastic wastes." 12th Composites Australia and CRC-ACS Conference 2015: Game On! Winning with Composites. Gold Coast, Australia 21 - 23 Apr 2015
Characterisation of recycled mixed plastic solid wastes: coupon and full-scale investigation
Bajracharya, Rohan Muni, Manalo, Allan C., Karunasena, Warna and Lau, Kin-tak. 2016. "Characterisation of recycled mixed plastic solid wastes: coupon and full-scale investigation." Waste Management. 48, pp. 72-80. https://doi.org/10.1016/j.wasman.2015.11.017
Analyses of woven hemp fabric characteristics for composite reinforcement
Misnon, M. I., Islam, M. M., Epaarachchi, J. A. and Lau, K. T.. 2015. "Analyses of woven hemp fabric characteristics for composite reinforcement." Materials and Design. 66 (A), pp. 82-92. https://doi.org/10.1016/j.matdes.2014.10.037
Effects of alkali treatment and elevated temperature on the mechanical properties of bamboo fibre-polyester composites
Manalo, Allan C., Wani, Evans, Zulkarnain, Noor Azwa, Karunasena, Warna and Lau, Kin-tak. 2015. "Effects of alkali treatment and elevated temperature on the mechanical properties of bamboo fibre-polyester composites." Composites Part B: Engineering. 80 (1), pp. 73-83. https://doi.org/10.1016/j.compositesb.2015.05.033
Improvement on the properties of polylactic acid (PLA) using bamboo charcoal particles
Ho, Mei-po, Lau, Kin-tak, Wang, Hao and Hui, David. 2015. "Improvement on the properties of polylactic acid (PLA) using bamboo charcoal particles." Composites Part B: Engineering. 81, pp. 14-25. https://doi.org/10.1016/j.compositesb.2015.05.048
Hemp reinforced composites with alkalization and acetylation fibre treatments
Wang, H., Kabir, M. M. and Lau, K. T.. 2014. "Hemp reinforced composites with alkalization and acetylation fibre treatments." Polymers and Polymer Composites. 22 (3), pp. 247-252. https://doi.org/10.1177/096739111402200
Evaluation of the blunt thoracic trauma caused by solid sports ball impacts
Thota, Narasimha, Epaarachchi, Jayantha and Lau, Kin Tak. 2015. "Evaluation of the blunt thoracic trauma caused by solid sports ball impacts." Journal of Biomechanical Science and Engineering. 10 (2). https://doi.org/10.1299/jbse.14-00264
Natural composites for bettering the environment [Keynote]
Lau, Alan K. T.. 2012. "Natural composites for bettering the environment [Keynote]." BIT's 1st Annual World Congress of Advanced Materials (WCAM 2012):Innovation, Cutting-Edge, and Smartness . Beijing, China 06 - 08 Jun 2012
Viscous criterion and its relation with the projectile-thorax energy interactions
Thota, Narasimha, Epaarachchi, Jayantha and Lau, Kin Tak. 2014. "Viscous criterion and its relation with the projectile-thorax energy interactions." 8th Australasian Congress on Applied Mechanics (ACAM 8). Melbourne, Australia 24 - 28 Nov 2014
Evaluation of the blunt thoracic trauma due to baseball impacts – review of the Blunt Criterion
Thota, Narasimha M., Epaarachchi, Jayantha A. and Lau, Kin Tak. 2014. "Evaluation of the blunt thoracic trauma due to baseball impacts – review of the Blunt Criterion." 8th Australasian Congress on Applied Mechanics (ACAM 8). Melbourne, Australia 24 - 28 Nov 2014
Effect of energy absorbing mechanisms on the blunt thoracic trauma caused by ballistic impacts
Thota, Narasimha M., Epaarachchi, Jayantha A. and Lau, Kin Tak. 2014. "Effect of energy absorbing mechanisms on the blunt thoracic trauma caused by ballistic impacts." 8th Australasian Congress on Applied Mechanics (ACAM 8). Melbourne, Australia 24 - 28 Nov 2014
Review of anthropomorphic test dummies for the evaluation of thoracic trauma due to blunt ballistic impacts
Thota, Narasimha M., Epaarachchi, Jayantha A. and Lau, Kin Tak. 2014. "Review of anthropomorphic test dummies for the evaluation of thoracic trauma due to blunt ballistic impacts." 8th Australasian Congress on Applied Mechanics (ACAM 8). Melbourne, Australia 24 - 28 Nov 2014
Impact location determination on thin laminated composite plates using an NIR-FBG sensor system
Hafizi, Z. M., Epaarachchi, J. and Lau, K. T.. 2015. "Impact location determination on thin laminated composite plates using an NIR-FBG sensor system." Measurement. 61, pp. 51-57. https://doi.org/10.1016/j.measurement.2014.08.040
Recent research trend in marine engineering materials (Keynote lecture)
Lau, Kin-Tak. 2010. "Recent research trend in marine engineering materials (Keynote lecture) ." 160th Eastern Forum of Sciences and Technology . Shanghai, China 20 - 21 Sep 2011
CAE simulation based methodology for airbag compliant vehicle front protection system development
Thota, Narasimha, Epaarachchi, Jayantha and Lau, Kin Tak. 2013. "CAE simulation based methodology for airbag compliant vehicle front protection system development." International Journal of Vehicle Structures and Systems. 5 (3-4), pp. 95-104. https://doi.org/10.4273/ijvss.5.3-4.04
Potentiality of utilising natural textile materials for engineering composites applications
Misnon, Mohd Iqbal, Islam, Md Mainul, Epaarachchi, Jayantha Ananda and Lau, Kin-tak. 2014. "Potentiality of utilising natural textile materials for engineering composites applications." Materials and Design. 59, pp. 359-368. https://doi.org/10.1016/j.matdes.2014.03.022
Development and validation of a thorax surrogate FE model for assessment of trauma due to high speed blunt impacts
Thota, Narasimha, Epaarachchi, Jayantha and Lau, Kin-Tak. 2014. "Development and validation of a thorax surrogate FE model for assessment of trauma due to high speed blunt impacts." Journal of Biomechanical Science and Engineering. 9 (1), pp. 08-1. https://doi.org/10.1299/jbse.2014jbse0008
Glass-fibre reinforced recycled mixed plastics (GMP): totally recyclable and renewable composites
Bajracharya, Rohan Muni, Manalo, Allan, Karunasena, Karu and Lau, Kin-tak. 2014. "Glass-fibre reinforced recycled mixed plastics (GMP): totally recyclable and renewable composites." IEEE Australia and New Zealand Student and Young Professional Congress (ANZSCON 2014). Brisbane, Australia 03 - 05 Jul 2014
Optimization effect of micro hardness by nanoclay clusters in nanoclay/epoxy composites
Lam, Chun-Ki and Lau, Kin-Tak. 2009. "Optimization effect of micro hardness by nanoclay clusters in nanoclay/epoxy composites ." Journal of Thermoplastic Composite Materials. 22 (2), pp. 213-225. https://doi.org/10.1177/0892705708091856
Polycarbonate-carbon nanofibers composites: an electron spin resonance study
Chipara, Mircea, Brittain, Wiliam J., Lau, Kin-Tak and Chipara, Magdalena Dorina. 2008. "Polycarbonate-carbon nanofibers composites: an electron spin resonance study ." Polymers and Polymer Composites. 16 (8), pp. 519-526.
Chemical treatments on hemp fibre composites
Wang, Hao, Kabir, Mazed and Lau, K. T.. 2013. "Chemical treatments on hemp fibre composites." Wang, Xungai (ed.) Fiber Society Spring 2013 Technical Conference (FS 2013): Advancing Scientific Knowledge Pertaining to Fibers and Fibrous Materials. Geelong, Australia 22 - 24 May 2013 Raleigh, NC. United States.
Analysis of heat-treated bovine cortical bone by thermal gravimetric and nanoindentation
Lau, Mei-ling, Lau, Kin-tak, Ku, Harry, Cardona, Francisco and Lee, Joong-Hee. 2013. "Analysis of heat-treated bovine cortical bone by thermal gravimetric and nanoindentation ." Composites Part B: Engineering. 55, pp. 447-452. https://doi.org/10.1016/j.compositesb.2013.06.027
An investigation of acoustic emission signal attenuation for monitoring of progressive failure in fiberglass reinforced composite laminates
Hafizi, Z. M., Epaarachchi, J. and Lau, K. T.. 2013. "An investigation of acoustic emission signal attenuation for monitoring of progressive failure in fiberglass reinforced composite laminates ." International Journal of Automotive and Mechanical Engineering. 8 (1), pp. 1442-1456. https://doi.org/10.15282/ijame.8.2013.31.0119
Effects of processing conditions of poly(methylmethacrylate) encapsulated liquid curing agent on the properties of self-healing composites
Li, Qi, Mishra, Ananta Kumar, Kim, Nam Hoon, Kuila, Tapas, Lau, Kin-tak and Lee, Joong Hee. 2013. "Effects of processing conditions of poly(methylmethacrylate) encapsulated liquid curing agent on the properties of self-healing composites ." Composites Part B: Engineering. 49, pp. 6-15. https://doi.org/10.1016/j.compositesb.2013.01.011
Hemp and hemp-based composites
Wang, Hao and Lau, Alan K.T.. 2013. "Hemp and hemp-based composites." Thakur, Vijay Kumar (ed.) Green composites from natural resources. Boca Raton, FL. United States. CRC Press. pp. 63-94
An overview of mechanical properties and durability of glass-fibre reinforced recycled mixed plastic waste composites
Bajracharya, Rohan Muni, Manalo, Allan C., Karunasena, Warna and Lau, Kin-tak. 2014. "An overview of mechanical properties and durability of glass-fibre reinforced recycled mixed plastic waste composites." Materials and Design. 62, pp. 98-112. https://doi.org/10.1016/j.matdes.2014.04.081
Tensile properties of glass fibre reinforced recycled mixed plastic composites
Bajracharya, Rohan Muni, Manalo, Allan C., Karunasena, Warna and Lau, Kin-tak. 2014. "Tensile properties of glass fibre reinforced recycled mixed plastic composites." Australasian Composites Conference (CA 2014): Materials for a Lighter and Smarter World. Newcastle, Australia 07 - 09 Apr 2014 Melbourne, Australia.
Effectiveness of using fibre-reinforced polymer composites for underwater steel pipeline repairs
Shamsuddoha, Md, Islam, Md Mainul, Aravinthan, Thiru, Manalo, Allan and Lau, Kin-tak. 2013. "Effectiveness of using fibre-reinforced polymer composites for underwater steel pipeline repairs." Composite Structures. 100, pp. 40-54. https://doi.org/10.1016/j.compstruct.2012.12.019
Prediction of obsolete FBG sensor using ANN for efficient and robust operation of SHM systems
Kahandawa, Gayan C., Epaarachchi, Jayantha A., Wang, Hao and Lau, K. T.. 2013. "Prediction of obsolete FBG sensor using ANN for efficient and robust operation of SHM systems." 4th Asia-Pacific Workshop on Structural Health Monitoring (APWSHM 2012). Melbourne, Australia 05 - 07 Dec 2012 Zurich, Switzerland. https://doi.org/10.4028/www.scientific.net/KEM.558.546
Mechanical properties of bamboo fiber-polyester composites
Manalo, A. C., Karunasena, W. and Lau, K. T.. 2013. "Mechanical properties of bamboo fiber-polyester composites." Samali, Bijan, Attard, Mario and Song, Chongmin (ed.) 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM22). Sydney, Australia 11 - 14 Dec 2012 Leiden, Netherlands.
Smart structure for small wind turbine blade
Supeni, E. E., Epaarachchi, J. A., Islam, M. M. and Lau, K. T.. 2013. "Smart structure for small wind turbine blade." Epaarachchi, Jayantha A., Lau, Alan Kin-tak and Leng, Jinsong (ed.) 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013). Gold Coast, Australia 10 - 12 Jul 2013 United States. https://doi.org/10.1117/12.2027725
Mechanical properties of epoxy grouts for structural repair
Shamsuddoha, M., Islam, M. M., Aravinthan, T., Manalo, A. C. and Lau, K. T.. 2013. "Mechanical properties of epoxy grouts for structural repair." Samali, Bijan, Attard, Mario M. and Song, Chongmin (ed.) 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM22). Sydney, Australia 11 - 14 Dec 2012 London, United Kingdom.
Structural evaluation of concrete expanded polystyrene sandwich panels for slab applications
Bajracharya, R. M., Lokuge, W. P., Karunasena, W., Lau, K. T. and Mosallam, A. S.. 2013. "Structural evaluation of concrete expanded polystyrene sandwich panels for slab applications." Samali, Bijan, Attard, Mario M. and Song, Chongmin (ed.) 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM22). Sydney, Australia 11 - 14 Dec 2012 London, United Kingdom.
Effect of coarse filler on shrinkages and dynamic mechanical properties of epoxy grouts
Shamsuddoha, Md, Islam, Md Mainul, Aravinthan, Thiru, Manalo, Allan and Lau, Kin-Tak. 2014. "Effect of coarse filler on shrinkages and dynamic mechanical properties of epoxy grouts." Journal of Multifunctional Composites. 2 (1), pp. 61-66. https://doi.org/10.12783/issn.2168-4286/2.1/
Embedded fibre optic sensors under multi-axial loading: a pilot study
Peauril, J., Epaarachchi, J., Lau, K. T. and Wang, H.. 2013. "Embedded fibre optic sensors under multi-axial loading: a pilot study." Epaarachchi, Jayantha A. , Lau, Alan Kin-tak and Leng, Jinsong (ed.) 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013). Gold Coast, Australia 10 - 12 Jul 2013 Bellingham, WA. United States. SPIE. https://doi.org/10.1117/12.2027958
NIR fibre bragg grating as dynamic sensor: an application of 1D digital wavelet analysis for signal denoising
Hafizi, Z. M., Kahandawa, G. C., Epaarachchi, J., Lau, K. T., Canning, J. and Cook, K.. 2013. "NIR fibre bragg grating as dynamic sensor: an application of 1D digital wavelet analysis for signal denoising ." Epaarachchi, Jayantha A. , Lau, Alan Kin-tak and Leng, Jinsong (ed.) 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013). Gold Coast, Australia 10 - 12 Jul 2013 Bellingham, WA. United States. https://doi.org/10.1117/12.2026668
Characterisation of mechanical and thermal properties of epoxy grouts for composite repair of steel pipelines
Shamsuddoha, Md, Islam, Md Mainul, Aravinthan, Thiru, Manalo, Allan and Lau, Kin-tak. 2013. "Characterisation of mechanical and thermal properties of epoxy grouts for composite repair of steel pipelines." Materials and Design. 52, pp. 315-327. https://doi.org/10.1016/j.matdes.2013.05.068
Indexing damage using distortion of embedded FBG sensor response spectra
Kahandawa, Gayan C., Epaarachchi, Jayantha A. and Lau, K. T.. 2013. "Indexing damage using distortion of embedded FBG sensor response spectra ." Epaarachchi, Jayantha A. , Lau, Alan Kin-tak and Leng, Jinsong (ed.) 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013). Gold Coast, Australia 10 - 12 Jul 2013 Bellingham, WA. United States. https://doi.org/10.1117/12.2027945
Extraction and processing of real time strain of embedded FBG sensors using a fixed filter FBG circuit and an artificial neural network
Kahandawa, Gayan C., Epaarachchi, Jayantha, Wang, Hao, Canning, John and Lau, K. T.. 2013. "Extraction and processing of real time strain of embedded FBG sensors using a fixed filter FBG circuit and an artificial neural network." Measurement. 46 (10), pp. 4045-4051. https://doi.org/10.1016/j.measurement.2013.07.029
Development of artificial neural network model in predicting performance of the smart wind turbine blade
Supeni, E. E., Epaarachchi, J. A., Islam, M. M. and Lau, K. T.. 2013. "Development of artificial neural network model in predicting performance of the smart wind turbine blade." 3rd Malaysian Postgraduate Conference (MPC 2013). Sydney, Australia 04 - 05 Jul 2013 Sydney, Australia.
Textile material forms for reinforcement materials: a review
Misnon, M. I., Islam, M. M., Epaarachchi, J. and Lau, K. T.. 2013. "Textile material forms for reinforcement materials: a review." 3rd Malaysian Postgraduate Conference (MPC 2013). Sydney, Australia 04 - 05 Jul 2013 Sydney, Australia.
Wave propogation scattering due to defect on thin composite plates
Hafizi, Z. M., Epaarachchi, J. and Lau, K. T.. 2013. "Wave propogation scattering due to defect on thin composite plates." 3rd Malaysian Postgraduate Conference (MPC 2013). Sydney, Australia 04 - 05 Jul 2013 Sydney, Australia.
Estimation of strain of distorted FBG sensor spectra using a fixed FBG filter circuit and an artificial neural network
Kahandawa, Gayan C., Epaarachchi, Jayantha, Lau, K. T. and Canning, John. 2013. "Estimation of strain of distorted FBG sensor spectra using a fixed FBG filter circuit and an artificial neural network ." Palaniswami, M., Leckie, C., Kanhere, S. and Gubbi, J. (ed.) IEEE 8th International Conference on Intelligent Sensors, Sensor Networks and Information Processing (ISSNIP 2013): Sensing the Future. Melbourne, Australia 02 - 05 Apr 2013 Piscataway, NJ. United States. https://doi.org/10.1109/ISSNIP.2013.6529770
Effect of the energy absorbing mechanisms on the blunt thoracic trauma caused by a typical foam projectile
Thota, Narasimha M., Epaarachchi, Jayantha A. and Lau, Kin-tak. 2013. "Effect of the energy absorbing mechanisms on the blunt thoracic trauma caused by a typical foam projectile." Mishra, G. C. and Sanskriti, Krishi (ed.) 3rd World Congress on Frontiers of Mechanical, Aerospace and Automotive Engineering (WCFMAAE 2013). New Delhi, India 02 - 03 Feb 2013 New Delhi, India.
Effect of the foam embellishments on the pedestrian safety of the vehicle front protection systems
Thota, N. M., Epaarachchi, J. A. and Lau, K. T.. 2013. "Effect of the foam embellishments on the pedestrian safety of the vehicle front protection systems." Mishra, G. C. and Sanskriti, Krishi (ed.) 3rd World Congress on Frontiers of Mechanical, Aerospace and Automotive Engineering (WCFMAAE 2013). New Delhi, India 02 - 03 Feb 2013 New Delhi, India.
Effects of chemical treatments on hemp fibre structure
Kabir, M. M., Wang, H., Lau, K. T. and Cardona, F.. 2013. "Effects of chemical treatments on hemp fibre structure." Applied Surface Science. 276, pp. 13-23. https://doi.org/10.1016/j.apsusc.2013.02.086
Tensile properties of chemically treated hemp fibres as reinforcement for composites
Kabir, M. M., Wang, H., Lau, K. T. and Cardona, F.. 2013. "Tensile properties of chemically treated hemp fibres as reinforcement for composites." Composites Part B: Engineering. 53, pp. 362-368. https://doi.org/10.1016/j.compositesb.2013.05.048
Nafion-peptized laponite clay nanocomposite membrane for PEMFC
Mishra, Ananta Kumar, Bae, Seon-Hyeong, Kim, Nam Hoon, Lau, Kin-tak and Lee, Joong Hee. 2012. "Nafion-peptized laponite clay nanocomposite membrane for PEMFC ." Lau, Alan K-T, Srivatsan, T. S., Bhattacharyya, Debes, Zhang, Ming Qiu and Ho, Mabel M. P. (ed.) 20th International Symposium on Processing and Fabrication of Advanced Materials (PFAM 20). Hong Kong 15 - 18 Dec 2011 Zurich, Switzerland . https://doi.org/10.4028/www.scientific.net/AMR.410.148
Fibre composites for high pressure pipeline repairs, in-air and subsea: an overview
Shamsuddoha, Md, Islam, Md Mainul, Aravinthan, Thiru, Manalo, Allan, Lau, Kin-tak and Elder, David. 2012. "Fibre composites for high pressure pipeline repairs, in-air and subsea: an overview." Ueda, Tamon (ed.) 3rd Asia-Pacific Conference on FRP in Structures (APFIS 2012). Sapporo, Japan 02 - 04 Feb 2012 Hokkaido, Japan.
Non-velocity based analysis of passive ultrasonic signal for source location detection in composite plates: a pilot study
Hafizi, Z. M., Epaarachchi, J., Nizwan, C. K. E. and Lau, K. T.. 2012. "Non-velocity based analysis of passive ultrasonic signal for source location detection in composite plates: a pilot study." 1st International Conference of Mechanical Engineering Research (ICMER 2011). Kuantan, Malaysia 05 - 07 Dec 2011 Bristol, United Kingdom . https://doi.org/10.1088/1757-899X/36/1/012008
Modal acoustic emission investigation for progressive failure monitoring in thin composite plates under tensile test
Hafizi, Mohd Zohari, Epaarachchi, Jayantha Ananda and Lau, K. T.. 2013. "Modal acoustic emission investigation for progressive failure monitoring in thin composite plates under tensile test." Key Engineering Materials. 558 (558), pp. 65-75. https://doi.org/10.4028/www.scientific.net/KEM.558.65
Optimized FBG sensor network for efficient detection of a delamination in FRP structures
Kahandawa, G. C., Epaarachchi, J. A., Wang, H. and Lau, K. T.. 2012. "Optimized FBG sensor network for efficient detection of a delamination in FRP structures." Jaafar, M., Azura, A. R., Leong, K. H. and Leong, A. Y. L. (ed.) 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today. Kuala Lumpur, Malaysia 06 - 08 Nov 2012 Kowloon, Hong Kong.
Detecting delamination in a composite structure using an embedded FBG-AE hybrid system
Kahandawa, G. C., Hafizi, Z. M., Epaarachchi, J. and Lau, K. T.. 2012. "Detecting delamination in a composite structure using an embedded FBG-AE hybrid system." Kotousov, Andrei (ed.) 7th Australasian Congress on Applied Mechanics (ACAM 2012). Adelaide, Australia 09 - 12 Dec 2012 Canberra, Australia.
Fabrication process optimization of hemp fibre reinforced polypropylene composites
Yan, Z. L., Wang, H., Lau, K. T., Zhang, J. C., Zhang, H. and Ding, Y.. 2012. "Fabrication process optimization of hemp fibre reinforced polypropylene composites." Jaafar, M., Azura, A. R., Leong, K. H. and Leong, A. Y L. (ed.) 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today. Kuala Lumpur, Malaysia 06 - 08 Nov 2012 Kowloon, Hong Kong.
Mechanical properties of a bamboo charcoal reinforced polylactic acid composite
Ho, M. P., Wang, H., Lau, K. T., Jayaraman, K. and Bhattacharyya, D.. 2012. "Mechanical properties of a bamboo charcoal reinforced polylactic acid composite." Jaafar, M., Azura, A. R., Leong, K. H. and Leong, A. Y. (ed.) 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today. Kuala Lumpur, Malaysia 06 - 08 Nov 2012 Kowloon, Hong Kong.
An investigation of effective detection length of a localized micro-failure in a laminated thin composite plate using FBG sensor integrated AE system
Hafizi, Z. M., Epaarachchi, J. and Lau, K. T.. 2012. "An investigation of effective detection length of a localized micro-failure in a laminated thin composite plate using FBG sensor integrated AE system." Jaafar, M., Azura, A. R., Leong, K. H. and Leong, A. Y. L. (ed.) 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today. Kuala Lumpur, Malaysia 06 - 08 Nov 2012 Kowloon, Hong Kong.
Development of smart wind turbine blades
Supeni, E. E., Epaarachchi, J. A., Islam, M. M. and Lau, K. T.. 2012. "Development of smart wind turbine blades." Jaafar, M., Azura, A. R., Leong, K. H and Leong, A. Y. L (ed.) 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today. Kuala Lumpur, Malaysia 06 - 08 Nov 2012 Kowloon, Hong Kong.
Thermal properties and structure conformation on silkworm silk fibre
Ho, Mei-po, Wang, Hao and Lau, Kin-tak. 2012. "Thermal properties and structure conformation on silkworm silk fibre." Heslehurst, Rikard Benton and Byrne, Ann (ed.) Composites Australia and the CRC for Advanced Composite Structures Conference 2012: Diversity in Composites. Leura, Australia 15 - 16 Mar 2012 Melbourne, Australia.
Compressive properties of chemically-treated hemp fibre reinforced composites
Kabir, Mohammad Mazedul, Wang, Hao, Lau, Alan, Cardona, Francisco and Aravinthan, Thiru. 2012. "Compressive properties of chemically-treated hemp fibre reinforced composites." Heslehurst, Rikard Benton and Byrne, Ann (ed.) Composites Australia and the CRC for Advanced Composite Structures Conference 2012: Diversity in Composites. Leura, Australia 15 - 16 Mar 2012 Melbourne, Australia.
Develop and validate a biomechanical surrogate of the human thorax using corrugated sheets: a feasibility study
Thota, Narasimha Murthy, Eepaarachchi, Jayantha A. and Lau, K. T.. 2012. "Develop and validate a biomechanical surrogate of the human thorax using corrugated sheets: a feasibility study." 7th Australasian Congress on Applied Mechanics (ACAM 2012). Adelaide, Australia 09 - 12 Dec 2012 Canberra, Australia.
Measurements of heat treatment effects on bovine cortical bones by nanoindentation and compression testing
Lau, Mei-Ling, Lau, Kin-Tak, Ku, Harry, Bahattacharyya, Debes and Yao, Yan-Dong. 2012. "Measurements of heat treatment effects on bovine cortical bones by nanoindentation and compression testing." Journal of Biomaterials and Nanobiotechnology. 3 (1), pp. 105-113. https://doi.org/10.4236/jbnb.2012.31014
Design of smart structures for wind turbine blades
Supeni, E. E., Epaarachchi, J. A., Islam, M. M. and Lau, K. T.. 2012. "Design of smart structures for wind turbine blades." Noor, M. M., Rahman, M. M. and Ismail, J. (ed.) 2nd Malaysian Postgraduate Conference (MPC 2012). Gold Coast, Australia 07 - 09 Jul 2012 Sydney, Australia.
A study on the dynamic mechanical properties of silk fibre composites
Ho, Mei-po, Wang, Hao, Ho, Chun-kit and Lau, Kin-tak. 2012. "A study on the dynamic mechanical properties of silk fibre composites." Advanced Materials Research. 410, pp. 106-109. https://doi.org/10.4028/www.scientific.net/AMR.410.106
Duct noise control by using very light composite plate
Choy, Y. S., Liu, Y. and Lau, K. T.. 2012. "Duct noise control by using very light composite plate." Advanced Materials Research. 410, pp. 361-365. https://doi.org/10.4028/www.scientific.net/AMR.410.361
Effect of degumming time on silkworm silk fibre for biodegradable polymer composites
Ho, Mei-po, Wang, Hao and Lau, Kin-tak. 2012. "Effect of degumming time on silkworm silk fibre for biodegradable polymer composites." Applied Surface Science. 258 (8), pp. 3948-3955. https://doi.org/10.1016/j.apsusc.2011.12.068
Chemical treatments on plant-based natural fibre reinforced polymer composites: an overview
Kabir, M. M., Wang, H., Lau, K. T. and Cardona, F.. 2012. "Chemical treatments on plant-based natural fibre reinforced polymer composites: an overview ." Composites Part B: Engineering. 43 (7), pp. 2883-2892. https://doi.org/10.1016/j.compositesb.2012.04.053
Interfacial bonding and degumming effects on silk fibre/polymer biocomposites
Ho, Mei-po, Wang, Hao, Lau, Kin-tak, Lee, Joong-hee and Hui, David. 2012. "Interfacial bonding and degumming effects on silk fibre/polymer biocomposites ." Composites Part B: Engineering. 43 (7), pp. 2801-2812. https://doi.org/10.1016/j.compositesb.2012.04.042
Design of an impact resistant glass fibre/epoxy composites using short silk fibres
Ho, Mei-po and Lau, Kin-tak. 2012. "Design of an impact resistant glass fibre/epoxy composites using short silk fibres." Materials and Design. 35 (1), pp. 664-669. https://doi.org/10.1016/j.matdes.2011.10.003
Modal analysis of high frequency acoustic signal approach for progressive failure monitoring in thin composite plates
Hafizi, Z. M., Epaarachchi, J. and Lau, K. T.. 2012. "Modal analysis of high frequency acoustic signal approach for progressive failure monitoring in thin composite plates." 2nd Malaysian Postgraduate Conference (MPC 2012). Gold Coast, Australia 07 - 09 Jul 2012 Sydney, Australia.
A critical review on the manufacturing processes in relation to the properties of nanoclay/polymer composites
Albdiry, M. T., Yousif, B. F., Ku, H. and Lau, K. T.. 2013. "A critical review on the manufacturing processes in relation to the properties of nanoclay/polymer composites." Journal of Composite Materials. 47 (9), pp. 1093-1115. https://doi.org/10.1177/0021998312445592
Reinforcement of polypropylene with hemp fibres
Yan, Z. L., Wang, H., Lau, K. T., Pather, S., Zhang, J. C., Lin, G. and Ding, Y.. 2013. "Reinforcement of polypropylene with hemp fibres." Composites Part B: Engineering. 46, pp. 221-226. https://doi.org/10.1016/j.compositesb.2012.09.027
A potential material for tissue engineering: silkworm silk/PLA biocomposite
Cheung, Hoi-Yan, Lau, Kin-tak, Tao, Xiao-Ming and Hui, David. 2008. "A potential material for tissue engineering: silkworm silk/PLA biocomposite ." Composites Part B: Engineering. 39 (6), pp. 1026-1033. https://doi.org/10.1016/j.compositesb.2007.11.009
Sonication effect on the mechanical properties of MWCNTs reinforced natural rubber
Tarawneh, Mou’ad A., Ahmad, Sahrim Hj., EhNoum, SeYong and Lau, Kin-tak. 2013. "Sonication effect on the mechanical properties of MWCNTs reinforced natural rubber." Journal of Composite Materials. 47 (5), pp. 579-585. https://doi.org/10.1177/0021998312443394
Critical factors on manufacturing processes of natural fibre composites
Ho, Mei-po, Wang, Hao, Lee, Joong-Hee, Ho, Chun-kit, Lau, Kin-tak, Leng, Jinsong and Hui, David. 2012. "Critical factors on manufacturing processes of natural fibre composites." Composites Part B: Engineering. 43 (8), pp. 3549-3562. https://doi.org/10.1016/j.compositesb.2011.10.001
Micro-crack behavior of carbon fiber reinforced thermoplastic modified epoxy composites for cryogenic applications
He, Yu-xin, Li, Qi, Kuila, Tapas, Kim, Nam Hoon, Jiang, Tongwu, Lau, Kin-tak and Lee, Joong Hee. 2013. "Micro-crack behavior of carbon fiber reinforced thermoplastic modified epoxy composites for cryogenic applications." Composites Part B: Engineering. 44 (1), pp. 533-539. https://doi.org/10.1016/j.compositesb.2012.03.014
Effect of silk fiber to the mechanical and thermal properties of its biodegradable composites
Ho, Mei-Po, Wang, Hao, Lau, Kin-Tak and Leng, Jinsong. 2013. "Effect of silk fiber to the mechanical and thermal properties of its biodegradable composites ." Journal of Applied Polymer Science. 127 (4), pp. 2389-2396. https://doi.org/10.1002/app.37539
Mechanical properties of chemically-treated hemp fibre reinforced sandwich composites
Kabir, M. M., Wang, H., Lau, K. T., Cardona, F. and Aravinthan, T.. 2012. "Mechanical properties of chemically-treated hemp fibre reinforced sandwich composites." Composites Part B: Engineering. 43 (2), pp. 159-169. https://doi.org/10.1016/j.compositesb.2011.06.003
Use of FBG sensors for SHM in aerospace structures
Kahandawa, Gayan C., Epaarachchi, Jayantha, Wang, Hao and Lau, K. T.. 2012. "Use of FBG sensors for SHM in aerospace structures." Photonic Sensors. 2 (3), pp. 203-214. https://doi.org/10.1007/s13320-012-0065-4
Development of composite plate for compact silencer design
Choy, Y. S., Liu, Y., Cheung, H. Y., Xi, Q. and Lau, K. T.. 2012. "Development of composite plate for compact silencer design ." Journal of Sound and Vibration. 331 (10), pp. 2348-2364. https://doi.org/10.1016/j.jsv.2011.12.023
The effect of fibre chemical treatments on hemp reinforced composites
Wang, H., Kabir, M. M. and Lau, K. T.. 2011. "The effect of fibre chemical treatments on hemp reinforced composites ." 18th International Conference on Composite Materials (ICCM-18). Jeju, Korea 21 - 26 Aug 2011 Seoul, Korea.
Introduction to multifunctional polymer nanocomposites
Leng, Jinsong, Li, Jianjun and Lau, Alan kin-tak. 2011. "Introduction to multifunctional polymer nanocomposites." Leng, Jinsong and Lau, Alan kin-tak (ed.) Multifunctional polymer nanocomposites. Boca Raton, FL. United States. CRC Press. pp. 1-18
Mechanical properties of an injected silk fibre reinforced PLA composite
Ho, Mei-Po, Lau, Kin-tak, Wang, Hao and Bhattacharyya, Debes. 2011. "Mechanical properties of an injected silk fibre reinforced PLA composite." Bhattacharyya, D., Lin, R. J. T. and Srivatsan, T. S. (ed.) 19th International Symposium on Processing and Fabrication of Advanced Materials (PFAM XIX). Auckland, New Zealand 14 - 17 Jan 2011 Auckland, New Zealand.
Recent research trend in natural-fibre composites
Lau, Alan K. T. and Ho, Mabel M. P.. 2011. "Recent research trend in natural-fibre composites." JEC Composites Magazine.
Electrochemical performance of a graphene polypyrrole nanocomposite as a supercapacitor electrode
Bose, Saswata, Kim, Nam Hoon, Kuila, Tapas, Lau, Kin-tak and Lee, Joong Hee. 2011. "Electrochemical performance of a graphene polypyrrole nanocomposite as a supercapacitor electrode ." Nanotechnology. 22 (29), p. 5202. https://doi.org/10.1088/0957-4484/22/29/295202
Assessing heat-treatment effects on bovine cortical bones by nanoindentation
Lau, Mei-ling, Lau, Kin-tak, Ku, Harry, Bahattacharyya, Debes and Lee, Joong-Hee. 2012. "Assessing heat-treatment effects on bovine cortical bones by nanoindentation ." Advanced Materials Research. https://doi.org/10.4028/www.scientific.net/AMR.410.110
Electromechanical stability of compressible dielectric elastomer actuators
Liu, Liwi, Liu, Yanju, Leng, Jinsong and Lau, Kin-tak. 2011. "Electromechanical stability of compressible dielectric elastomer actuators ." Smart Materials and Structures. 20 (11), p. 115015. https://doi.org/10.1088/0964-1726/20/11/115015
Novel phenolic resins with improved mechanical and toughness properties
Cardona, Francisco, Lau, Alan Kin-Tak and Fedrigo, Jessica. 2012. "Novel phenolic resins with improved mechanical and toughness properties." Journal of Applied Polymer Science. 123 (4), pp. 2131-2139. https://doi.org/10.1002/app.34719
Property enhancement of a carbon fiber/epoxy composite by using carbon nanotubes
Kim, M. T., Rhee, K. Y., Lee, J. H., Hui, D. and Lau, Alan K. T.. 2011. "Property enhancement of a carbon fiber/epoxy composite by using carbon nanotubes ." Composites Part B: Engineering. 42 (5), pp. 1257-1261. https://doi.org/10.1016/j.compositesb.2011.02.005
Correlation of mechanical performance and morphological structures of epoxy micro/nanoparticulate composites
Dong, Yu, Chaudhary, Deeptangshu, Ploumis, Charlie and Lau, Kin-tak. 2011. "Correlation of mechanical performance and morphological structures of epoxy micro/nanoparticulate composites ." Composites Part A: Applied Science and Manufacturing. 42 (10), pp. 1483-1492. https://doi.org/10.1016/j.compositesa.2011.06.015
Mechanism of reinforcement in a nanoclay/polymer composite
Chan, Mo-lin, Lau, Kin-tak, Wong, Tsun-tat, Ho, Mei-po and Hui, David. 2011. "Mechanism of reinforcement in a nanoclay/polymer composite ." Composites Part B: Engineering. 42 (6), pp. 1708-1712. https://doi.org/10.1016/j.compositesb.2011.03.011
An experimental investigation of early damage localization for thin glass fibre reinforced symmetric composite laminates
Hafizi, Z. M., Epaarachchi, J. and Lau, K. T.. 2012. "An experimental investigation of early damage localization for thin glass fibre reinforced symmetric composite laminates." Heslehurst, Rikard Benton and Byrne, Ann (ed.) Composites Australia and the CRC for Advanced Composite Structures Conference 2012: Diversity in Composites. Leura, Australia 15 - 16 Mar 2012 Melbourne, Australia.
Carbon nanotubes for space and bio-engineering applications
Lau, Kin-Tak, Cheung, Hoi-Yan, Lu, Jian Ping, Yin, Yan-Sheng, Hui, David and Li, Hu-Lin. 2008. "Carbon nanotubes for space and bio-engineering applications ." Journal of Computational and Theoretical Nanoscience. 5 (1), pp. 23-35. https://doi.org/10.1166/jctn.2008.003
Interfacial bonding characteristic of nanoclay/polymer composites
Chan, Mo-lin, Lau, Kin-tak, Wong, T. T. and Cardona, Francisco. 2011. "Interfacial bonding characteristic of nanoclay/polymer composites." Applied Surface Science. 258 (2), pp. 860-864. https://doi.org/10.1016/j.apsusc.2011.09.016
Preparation and study of polypropylene/polyethylene terephthalate composite fibres
Si, Xiaojuan, Guo, Linfeng, Wang, Yimin and Lau, Kin-Tak. 2008. "Preparation and study of polypropylene/polyethylene terephthalate composite fibres." Composites Science and Technology. 68 (14), pp. 2943-2947. https://doi.org/10.1016/j.compscitech.2007.11.008
Mechanical and thermal properties of chicken feather fiber/PLA green composites
Cheng, Sha, Lau, Kin-Tak, Liu, Tao, Zhao, Yong-Qing, Lam, Pou-Man and Yin, Yansheng. 2009. "Mechanical and thermal properties of chicken feather fiber/PLA green composites ." Composites Part B: Engineering. 40 (7), pp. 650-654. https://doi.org/10.1016/j.compositesb.2009.04.011
Sliding wear performance of nano-SiO2/short carbon fiber/epoxy hybrid composites
Guo, Qing Bing, Rong, Min Zhi, Jia, Guo Liang, Lau, Kin-Tak and Zhang, Ming Qiu. 2009. "Sliding wear performance of nano-SiO2/short carbon fiber/epoxy hybrid composites ." Wear. 266 (7-8), pp. 658-665. https://doi.org/10.1016/j.wear.2008.08.005
Synthesis of zirconia nanoparticles on carbon nanotubes and their potential for enhancing the fracture toughness of alumina ceramics
Zhu, Yue-Feng, Shi, Lei, Liang, Ji, Hui, David and Lau, Kin-Tak. 2008. "Synthesis of zirconia nanoparticles on carbon nanotubes and their potential for enhancing the fracture toughness of alumina ceramics." Composites Part B: Engineering. 39 (7-8), pp. 1136-1141. https://doi.org/10.1016/j.compositesb.2008.03.006
Fabrication and mechanical properties of exfoliated clay-CNTs/epoxy nanocomposites
Wang, Zhicai, Xu, Cailing, Zhao, Yongqing, Zhao, Dandan, Wang, Zhe, Li, Hulin and Lau, Kin-Tak. 2008. "Fabrication and mechanical properties of exfoliated clay-CNTs/epoxy nanocomposites." Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing. 490 (1-2), pp. 481-487. https://doi.org/10.1016/j.msea.2008.01.040
Mechanical properties of epoxy-based composites using coiled carbon nanotubes
Li, Xiao-Feng, Lau, Kin-Tak and Yin, Yan-Sheng. 2008. "Mechanical properties of epoxy-based composites using coiled carbon nanotubes." Composites Science and Technology. 68 (14), pp. 2876-2881. https://doi.org/10.1016/j.compscitech.2007.10.019
Strain monitoring of RC members strengthened with smart NSM FRP bars
Wang, Bo, Teng, J. G., De Lorenzis, Laura, Zhou, Li-Min, Ou, Jinping, Jin, Wei and Lau, K. T.. 2009. "Strain monitoring of RC members strengthened with smart NSM FRP bars." Construction and Building Materials. 23 (4), pp. 1698-1711. https://doi.org/10.1016/j.conbuildmat.2008.07.027
Acousto-ultrasonic sensing for delaminated GFRP composites using an embedded FBG sensor
Lam, Pou-Man, Lau, Kin-Tak, Ling, Hang-Yin, Su, Zhong-Qing and Tam, Hwa-Yaw. 2009. "Acousto-ultrasonic sensing for delaminated GFRP composites using an embedded FBG sensor." Optics and Lasers in Engineering. 47 (10), pp. 1049-1055. https://doi.org/10.1016/j.optlaseng.2009.01.010
Composite panels for reducing noise in air conditioning and ventilation systems
Choy, Yat-Sze, Lau, Kin-Tak, Wang, C., Chau, C. W., Liu, Yang and Hui, D.. 2009. "Composite panels for reducing noise in air conditioning and ventilation systems." Composites Part B: Engineering. 40 (4), pp. 259-266. https://doi.org/10.1016/j.compositesb.2009.01.004
Carbon nanotube-reinforced nanocomposites
Lau, Alan kin-tak. 2011. "Carbon nanotube-reinforced nanocomposites." Lau, Alan kin-tak and Leng, Jinsong (ed.) Multifunctional polymer nanocomposites. Boca Raton, FL. United States. CRC Press. pp. 19-45
Sensors, actuators, and intelligent processing [Preface]
Lau, Kin-Tak, Epaarachchi, Jayantha and Sudarshan, T. S.. 2010. "Sensors, actuators, and intelligent processing [Preface]." Materials and Manufacturing Processes. 25 (4), pp. 211-211. https://doi.org/10.1080/10426910903425036
Biocomposites: their multifunctionality
Lau, Kin-tak, Ho, Mei-po, Au-Yeung, Chi-ting and Cheung, Hoi-yan. 2010. "Biocomposites: their multifunctionality." International Journal of Smart and Nano Materials. 1 (1), pp. 13-27. https://doi.org/10.1080/19475411003589780
Characteristics of a silk fibre reinforced biodegradable plastic
Ho, Mei-Po, Lau, Kin-Tak, Wang, Hao and Bhattacharyya, Debes. 2011. "Characteristics of a silk fibre reinforced biodegradable plastic." Composites Part B: Engineering. 42 (2), pp. 117-122. https://doi.org/10.1016/j.compositesb.2010.10.007
Effects of natural fibre surface on composite properties: a review
Kabir, M. M., Wang, H., Aravinthan, T., Cardona, F. and Lau, K. -T.. 2011. "Effects of natural fibre surface on composite properties: a review." Cowled, Craig J. L. (ed.) 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing (eddBE 2011). Brisbane, Australia 27 - 29 Apr 2011 Brisbane, Australia.
I-V characteristics and electro-mechanical response of different carbon black/epoxy composites
Ji, Xiaoyong, Li, Hui, Hui, David, Hsiao, Kuang-Ting, Ou, Jinping and Lau, Alan K. T.. 2010. "I-V characteristics and electro-mechanical response of different carbon black/epoxy composites." Composites Part B: Engineering. 41 (1), pp. 25-32. https://doi.org/10.1016/j.compositesb.2009.05.001
A shape memory alloy energy absorber for backpack design
Lau, Sindy Mei-Ling, Lau, Kin-Tak, Yin, Yan-Sheng, Li, Lan, Wong, May, Chan, Kevin and Chen, William. 2010. "A shape memory alloy energy absorber for backpack design." Materials and Manufacturing Processes. 25 (4), pp. 281-286. https://doi.org/10.1080/10426910903426471
Optimization of tribological and mechanical properties of epoxy through hybrid filling
Guo, Qing Bing, Lau, Kin-Tak, Rong, Min Zhi and Zhang, Ming Qiu. 2010. "Optimization of tribological and mechanical properties of epoxy through hybrid filling." Wear. 269 (1-2), pp. 13-20. https://doi.org/10.1016/j.wear.2010.03.001
Silkworm silk/poly(lactic acid) biocomposites: dynamic mechanical, thermal and biodegradable properties
Zhao, Yong-Qing, Cheung, Hoi-Yan, Lau, Kin-Tak, Xu, Cai-Ling, Zhao, Dan-Dan and Li, Hu-Lin. 2010. "Silkworm silk/poly(lactic acid) biocomposites: dynamic mechanical, thermal and biodegradable properties." Polymer Degradation and Stability. 95 (10), pp. 1978-1987. https://doi.org/10.1016/j.polymdegradstab.2010.07.015
Thermal behavior of MWNT-reinforced thermoplastic natural rubber nanocomposites
Tarawneh, Mouad. A., Ahmad, Sahrim Hj., Rasid, Rozaidi, Yahya, S. Y., Lau, Kin-tak, Kong, Ing and Noum, Se Yong Eh. 2011. "Thermal behavior of MWNT-reinforced thermoplastic natural rubber nanocomposites." Journal of Reinforced Plastics and Composites. 30 (3), pp. 216-221. https://doi.org/10.1177/0731684410391512
Effect of surface treatment with potassium persulfate on dispersion stability of multi-walled carbon nanotubes
Park, Ok-kyung, Kim, Nam Hoon, Lau, Kin-Tak and Lee, Joong Hee. 2010. "Effect of surface treatment with potassium persulfate on dispersion stability of multi-walled carbon nanotubes." Materials Letters. 64 (6), pp. 718-721. https://doi.org/10.1016/j.matlet.2009.12.048
The electrochemistry corrosion behavior of Fe3Al-type intermetallic with super-hydrophobic surfaces
Liu, Tao, Lau, Kin-Tak, Chen, Shougang, Cheng, Sha, He, Tian and Yin, Yansheng. 2010. "The electrochemistry corrosion behavior of Fe3Al-type intermetallic with super-hydrophobic surfaces." Materials and Manufacturing Processes. 25 (5), pp. 298-301. https://doi.org/10.1080/10426911003747717
Measurement of bovine bone properties through surface indentation technique
Lau, Mei-ling, Lau, Kin-tak, Yao Yeo, Yan-Dong, Au Yeung, Chi-ting and Lee, Joong-hee. 2010. "Measurement of bovine bone properties through surface indentation technique." Materials and Manufacturing Processes. 25 (5), pp. 324-328. https://doi.org/10.1080/10426911003748137
Microscopical observation of the marine bacterium vibrio natriegeus growth on metallic corrosion
Cheng, Sha, Lau, Kin-Tak, Chen, Shougang, Chang, Xueting, Liu, Tao and Yin, Yansheng. 2010. "Microscopical observation of the marine bacterium vibrio natriegeus growth on metallic corrosion." Materials and Manufacturing Processes. 25 (5), pp. 293-297. https://doi.org/10.1080/10426911003747642
Polymer membranes for high temperature proton exchange membrane fuel cell: recent advances and challenge
Bose, Saswata, Kuila, Tapas, Nguyen, Thi Xuan Hien, Kim, Nam Hoon, Lau, Kin-tak and Lee, Joong Hee. 2011. "Polymer membranes for high temperature proton exchange membrane fuel cell: recent advances and challenge." Progress in Polymer Science. 36 (6), pp. 813-843. https://doi.org/10.1016/j.progpolymsci.2011.01.003
Study on the mechanical properties of different silkworm silk fibers
Cheung, Hoi-Yan, Ho, Mei-po, Lau, Kin-tak and Mosallam, Ayman. 2009. "Study on the mechanical properties of different silkworm silk fibers." Journal of Composite Materials. 43 (22), pp. 2521-2531. https://doi.org/10.1177/0021998309345347
Biodegradation of a silkworm silk/PLA composite
Cheung, Hoi-Yan, Lau, Kin-Tak, Pow, Yu-Fung, Zhao, Yong-Qing and Hui, David. 2010. "Biodegradation of a silkworm silk/PLA composite." Composites Part B: Engineering. 41 (3), pp. 223-228. https://doi.org/10.1016/j.compositesb.2009.09.004
In-situ synthesis and characterization of electrically conductive polypyrrole/graphene nanocomposites
Bose, Saswata, Kuila, Tapas, Uddin, Md. Elias, Kim, Nam Hoon, Lau, Alan K. T. and Lee, Joong Hee. 2010. "In-situ synthesis and characterization of electrically conductive polypyrrole/graphene nanocomposites." Polymer. 51 (25), pp. 5921-5928. https://doi.org/10.1016/j.polymer.2010.10.014
Nanodiamond/poly (lactic acid) nanocomposites: effect of nanodiamond on structure and properties of poly (lactic acid)
Zhao, Yong-Qing, Lau, Kin-Tak, Kim, Jang-Kyo, Xu, Cai-Ling, Zhao, Dan-Dan and Li, Hu-Lin. 2010. "Nanodiamond/poly (lactic acid) nanocomposites: effect of nanodiamond on structure and properties of poly (lactic acid)." Composites Part B: Engineering. 41 (8), pp. 646-653. https://doi.org/10.1016/j.compositesb.2010.09.003
Natural fibre-reinforced composites for bioengineering and environmental engineering
Cheung, Hoi-Yan, Ho, Mei-Po, Lau, Kin-Tak, Cardona, Francisco and Hui, David. 2009. "Natural fibre-reinforced composites for bioengineering and environmental engineering." Composites Part B: Engineering. 40 (7), pp. 655-663. https://doi.org/10.1016/j.compositesb.2009.04.014