Experimental investigation on the interfacial adhesion of date palm fibres with epoxy matrix

Paper


Alsaeed, T., Alajmi, A., Yousif, B. F., Ku, H. and Lau, Alan Kin-tak. 2012. "Experimental investigation on the interfacial adhesion of date palm fibres with epoxy matrix." Heslehurst, Rikard Benton and Byrne, Ann (ed.) Composites Australia and the CRC for Advanced Composite Structures Conference 2012: Diversity in Composites. Leura, Australia 15 - 16 Mar 2012 Melbourne, Australia.
Paper/Presentation Title

Experimental investigation on the interfacial adhesion of date palm fibres with epoxy matrix

Presentation TypePaper
AuthorsAlsaeed, T. (Author), Alajmi, A. (Author), Yousif, B. F. (Author), Ku, H. (Author) and Lau, Alan Kin-tak (Author)
EditorsHeslehurst, Rikard Benton and Byrne, Ann
Journal or Proceedings TitleProceedings of the Composites Australia and the CRC for Advanced Composite Structures Conference 2012
Number of Pages13
Year2012
Place of PublicationMelbourne, Australia
ISBN9780987328502
Web Address (URL) of Paperhttp://www.compositesaustralia.com.au
Conference/EventComposites Australia and the CRC for Advanced Composite Structures Conference 2012: Diversity in Composites
Event Details
Composites Australia and the CRC for Advanced Composite Structures Conference 2012: Diversity in Composites
Event Date
15 to end of 16 Mar 2012
Event Location
Leura, Australia
Abstract

Interfacial adhesion of natural fibres as reinforcement is the key parameter to be considered in fibre polymeric composites. In the current work, interfacial adhesion of date palm fibre is inverstigated using single fibre pull out experiments. The interfacial property of date pal fibre was determined with epoxy matrix. Scanning Electron Microscopy (SEM) was used to examine the surface morphology and damage feature on the fibre before and after the test. The influence NaOH treatment at different concentrations (0% - 9%) and embedded fibre length in the epoxy matric are considered. The results revealed that treated the fibre with 6% NaOH highly enhanced interfacial adhesion of the date palm fibre with epoxy matrix. The embedded length of the fibre controlled the interfacial adhesion property of the fibre where 15mm embedded length was the optimum fibre length. The lowest fibre critical length can be obtained at lower fibre diameter and 6% NaOH treatment.

Keywordsdate palm fibre; interfacial adhesion; epoxy; NaOH treatment concentration; critical length; mechanical properties
ANZSRC Field of Research 2020401499. Manufacturing engineering not elsewhere classified
401602. Composite and hybrid materials
340502. Natural products and bioactive compounds
Public Notes

Copyright 2012 by the Composites Australia.

No part of this publication may be reproduced, distributed, or transmitted, in any form or by any means, or stored in a database or retrieval system, without the prior written permission of the publisher.

Byline AffiliationsCentre of Excellence in Engineered Fibre Composites
Institution of OriginUniversity of Southern Queensland
Permalink -

https://research.usq.edu.au/item/q1yw5/experimental-investigation-on-the-interfacial-adhesion-of-date-palm-fibres-with-epoxy-matrix

  • 1950
    total views
  • 362
    total downloads
  • 4
    views this month
  • 0
    downloads this month

Export as

Related outputs

Overview of emerging hybrid and composite materials for space applications
Ince, J.C., Peerzada, M., Mathews, L.D., Pai, A.R., Al‑qatatsheh, A., Abbasi, S., Yin, Y., Hameed, N., Duffy, A.R., Lau, K. and Salim, N.V.. 2023. "Overview of emerging hybrid and composite materials for space applications." Advanced Composites and Hybrid Materials. 6 (4). https://doi.org/10.1007/s42114-023-00678-5
Investigation on Three-Body Abrasion Resistance of Mild Steel Soil Slurry Condition-Simulating Agricultural Condition
Alsaeed, Talal, Alajmi, Ayedh Eid, Alotaibi, Jasem Ghanem and Yousif, Belal F.. 2023. "Investigation on Three-Body Abrasion Resistance of Mild Steel Soil Slurry Condition-Simulating Agricultural Condition." Advances in Materials Science and Engineering. 2023. https://doi.org/10.1155/2023/5616909
Investigating the lap shear adhesion of coir and glass-fibre reinforced epoxy bonding to mild steel with varying volume fractions
Alajmi, Ayedh Eid, Alsaeed, Talal, Alotaibi, Jasem Ghanem, Srelam, Jayanth Kumar and Yousif, Belal F.. 2023. "Investigating the lap shear adhesion of coir and glass-fibre reinforced epoxy bonding to mild steel with varying volume fractions." Frontiers in Mechanical Engineering. 9. https://doi.org/10.3389/fmech.2023.1232643
Theoretical Study of the Effect of Fibre Porosity on the Heat Conductivity of Reinforced Gypsum Composite Material
Shalwan, A., Alajmi, Abdalrahman and Yousif, B. F.. 2022. "Theoretical Study of the Effect of Fibre Porosity on the Heat Conductivity of Reinforced Gypsum Composite Material." Polymers. 14 (19), pp. 1-23. https://doi.org/10.3390/polym14193973
Machinability of Polymeric Composites and Future Reinforcements — A Review
Shalwan, Abdullah, Alsaeed, Talal and Yousif, Belal. 2022. "Machinability of Polymeric Composites and Future Reinforcements — A Review." Journal of Materials Science and Chemical Engineering. 10 (5), pp. 40-72. https://doi.org/10.4236/msce.2022.105004
A Comprehensive Review on Efficiency Enhancement of Solar Collectors Using Hybrid Nanofluids
Mahamude, Abu Shadate Faisal, Kamarulzaman, Muhamad Kamal, Harun, Wan Sharuzi Wan, Kadirgama, Kumaran, Ramasamy, Devarajan, Farhana, Kaniz, Bakar, Rosli Abu, Yusaf, Talal, Subramanion, Sivarao and Yousif, Belal. 2022. "A Comprehensive Review on Efficiency Enhancement of Solar Collectors Using Hybrid Nanofluids." Energies. 15 (4), pp. 1-25. https://doi.org/10.3390/en15041391
Impact Properties of the Chemically Treated Hemp Fibre Reinforced Polyester Composites
Kabir, Mohammad Mazedul, Al-Haik, Mohammad Yousef, Aldajah, Saud Hamad, Lau, Kin Tak and Wang, Hao. 2020. "Impact Properties of the Chemically Treated Hemp Fibre Reinforced Polyester Composites." Fibers and Polymers. 21 (9), pp. 2098-2110. https://doi.org/10.1007/s12221-020-9630-4
Fabric Parameter Effect on the Mechanical Properties of Woven Hemp Fabric Reinforced Composites as an Alternative to Wood Products
Misnon, I. M., Islam, M. M., Epaarachchi, J. A., Lau, K. T. and Wang, H.. 2016. "Fabric Parameter Effect on the Mechanical Properties of Woven Hemp Fabric Reinforced Composites as an Alternative to Wood Products." Advance Research in Textile Engineering. 1 (1).
Hydrogen Energy Demand Growth Prediction and Assessment (2021–2050) Using a System Thinking and System Dynamics Approach
Yusaf, Talal, Laimon, Mohamd, Alrefae, Waleed, Kadirgama, Kumaran, Al Dhahad, Hayder, Ramasamy, Devarajan, Kamarulzaman, Mohd Kamal and Yousif, Belal. 2022. "Hydrogen Energy Demand Growth Prediction and Assessment (2021–2050) Using a System Thinking and System Dynamics Approach." Applied Sciences. 12 (2), pp. 1-16. https://doi.org/10.3390/app12020781
Effect of hemp fibre surface treatment on the fibre-matrix interface and the influence of cellulose, hemicellulose and lignin contents on composite strength properties
Kabir, Mohammad Mazedul, Alhaik, Mohammad Yousef, Aldajah, Saud Hamad, Lau, Kin Tak, Wang, Hao and Islam, Md Mainul. 2021. "Effect of hemp fibre surface treatment on the fibre-matrix interface and the influence of cellulose, hemicellulose and lignin contents on composite strength properties." Advances in Materials Science and Engineering. 2021, pp. 1-17. https://doi.org/10.1155/2021/9753779
Tribological behavior of mild steel under canola biolubricant conditions
Shalwan, A., Yousif, B. F., Alajmi, F. H. and Alajmi, M.. 2021. "Tribological behavior of mild steel under canola biolubricant conditions." Advances in Tribology. 2021, pp. 1-13. https://doi.org/10.1155/2021/3795831
Tribological studies of bamboo fibre reinforced epoxy composites using a BOD technique
Alajmi, Ayedh Eid, Alotaibi, Jasem Gh., Yousif, B. F. and Nirmal, Umar. 2021. "Tribological studies of bamboo fibre reinforced epoxy composites using a BOD technique." Polymers. 13 (15). https://doi.org/10.3390/polym13152444
Epoxy and polyester composites’ characteristics under tribological loading conditions
Alotaibi, Jasem Ghanem, Alajmi, Ayedh Eid, Mehoub, Gabrel A. and Yousif, Belal F.. 2021. "Epoxy and polyester composites’ characteristics under tribological loading conditions." Polymer. 13. https://doi.org/10.3390/polym13142230
Tribological Performance of Materials Under Bio-Three Body Abrasion
Alotaibi, Jasem G., Omer, Ako K., Salih, Nbhan D. and Yousif, Belal F.. 2020. "Tribological Performance of Materials Under Bio-Three Body Abrasion." American Journal of Applied Sciences. 17 (1), pp. 161-170. https://doi.org/10.3844/ajassp.2020.161.170
Effect of Fibre Content on Compressive and Flexural Properties of Coconut Fibre Reinforced Epoxy Composites
Alotaibi, Jasem G., Alajmi, Ayedh Eid, Yousif, Belal F. and Salih, Nbhan D.. 2020. "Effect of Fibre Content on Compressive and Flexural Properties of Coconut Fibre Reinforced Epoxy Composites." American Journal of Applied Sciences. 17 (1), pp. 141-155. https://doi.org/10.3844/ajassp.2020.141.155
Physical and mechanical properties of bamboo fibre/polyester composites subjected to moisture and hygrothermal conditions
Azwa, Z. N. and Yousif, B. F.. 2019. "Physical and mechanical properties of bamboo fibre/polyester composites subjected to moisture and hygrothermal conditions." Proceedings of the Institution of Mechanical Engineers Part L: Journal of Materials, Design and Applications. 233 (6). https://doi.org/10.1177/1464420717704221
Europium complex with functionalized carbon nanotubes: a new lanthanide photoluminescence nanomaterial
Li, Xiao-Feng, An, Yan, Lau, Kin-Tak, Li, Wen-Ge and Yin, Yan-Sheng. 2012. "Europium complex with functionalized carbon nanotubes: a new lanthanide photoluminescence nanomaterial." Lau, Alan K.-T., Srivatsan, T. S., Bhattacharyya, Debes, Zhang, Ming Qiu and Ho, Mabel M. P. (ed.) 20th International Symposium on Processing and Fabrication of Advanced Materials (PFAM 20). Hong Kong 15 - 18 Dec 2011 Zurich, Switzerland. https://doi.org/10.4028/www.scientific.net/AMR.410.129
Interfacial bonding in a nanoclay/polymer composite
Chan, Mo-lin, Lau, Kin-Tak and Wong, T. T.. 2012. "Interfacial bonding in a nanoclay/polymer composite." Lau, Alan K.-T., Srivatsan, T. S., Bhattacharyya, Debes, Zhang, Ming Qiu and Ho, Mabel M. P. (ed.) 20th International Symposium on Processing and Fabrication of Advanced Materials (PFAM 20). Hong Kong 15 - 18 Dec 2011 Zurich, Switzerland. https://doi.org/10.4028/www.scientific.net/AMR.410.156
Influence of Graphene Nanoplatelets on Mechanical Properties and Adhesive Wear Performance of Epoxy-Based Composites
Eayal Awwad, K. Y., Yousif, B. F., Fallahnezhad, Khosro, Saleh, Khalid and Zeng, Xuesen. 2021. "Influence of Graphene Nanoplatelets on Mechanical Properties and Adhesive Wear Performance of Epoxy-Based Composites." Friction. 9 (4), pp. 856-875. https://doi.org/10.1007/s40544-020-0453-5
Tribological investigation of frictional behaviour of mild steel under canola bio-lubricant conditions
Shalwan, A., Yousif, B. F., Alajmi, F. H., Alrashdana, K. R. and Alajmi, M.. 2020. "Tribological investigation of frictional behaviour of mild steel under canola bio-lubricant conditions." Tribology in Industry. 42 (3), pp. 481-493. https://doi.org/10.24874/ti.895.05.20.09
The influence of emulsified water fuel containing fresh water microalgae on diesel engine performance, combustion, vibration and emission
Al-lwayzy, Saddam H., Yusaf, Talal, Saleh, Khalid and Yousif, Belal. 2019. "The influence of emulsified water fuel containing fresh water microalgae on diesel engine performance, combustion, vibration and emission." Energies. 12 (13), pp. 1-17. https://doi.org/10.3390/en12132546
Toughening of brittle polyester with functionalized halloysite nanocomposites
Albdiry, M. T. and Yousif, B. F.. 2019. "Toughening of brittle polyester with functionalized halloysite nanocomposites." Composites Part B: Engineering. 160, pp. 94-109. https://doi.org/10.1016/j.compositesb.2018.10.032
The influence of fibre orientation on tribological performance of jute fibre reinforced epoxy composites considering different mat orientations
Alshammari, F. Z., Saleh, K. H., Yousif, B. F., Alajmi, A., Shalwan, A. and Alotaibi, J. G.. 2018. "The influence of fibre orientation on tribological performance of jute fibre reinforced epoxy composites considering different mat orientations." Tribology in Industry. 40 (3), pp. 335-348. https://doi.org/10.24874/ti.2018.40.03.01
Fracture behaviour of bamboo fiber reinforced epoxy composites
Khan, Ziaullah, Yousif, B. F. and Islam, Mainul. 2017. "Fracture behaviour of bamboo fiber reinforced epoxy composites." Composites Part B: Engineering. 116, pp. 186-199. https://doi.org/10.1016/j.compositesb.2017.02.015
Preliminary study on the development of syntactic foams for marine applications
Salleh, Z., Islam, M. M. and Ku, H.. 2013. "Preliminary study on the development of syntactic foams for marine applications." Epaarachchi, Jayantha A., Lau, Alan Kin-tak and Leng, Jinsong (ed.) 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013). Gold Coast, Australia 10 - 12 Jul 2013 United States. https://doi.org/10.1117/12.2028279
Durability characteristics and property prediction of glass fibre reinforced mixed plastics composites
Bajracharya, Rohan Muni, Manalo, Allan C., Karunasena, Warna and Lau, Kin-tak. 2017. "Durability characteristics and property prediction of glass fibre reinforced mixed plastics composites." Composites Part B: Engineering. 116, pp. 16-29. https://doi.org/10.1016/j.compositesb.2017.02.027
SI: materials, design and tribology
Yousif, B. F.. 2013. "SI: materials, design and tribology." Materials and Design. 48. https://doi.org/10.1016/j.matdes.2013.01.009
Investigation of the impact properties of glass fibre / HMPP fibre hybrid composite materials for civil infrastructure constructions
Malvern, J. L., Epaarachchi, J. A. and Lau, K. T.. 2011. "Investigation of the impact properties of glass fibre / HMPP fibre hybrid composite materials for civil infrastructure constructions." 18th International Conference on Composite Materials (ICCM-18). Jeju, Korea 21 - 26 Aug 2011 Korea.
Effect of degumming on tussah silk fibre
Ho, M. P., Lau, K. T. and Wang, H.. 2011. "Effect of degumming on tussah silk fibre." Lee, Woo (ed.) 18th International Conference on Composite Materials (ICCM-18). Jeju, Korea 21 - 26 Aug 2011 Seoul, Korea.
The process of updating production engineering in an Australian regional university excellence in developing e-learning
Ku, H.. 2011. "The process of updating production engineering in an Australian regional university excellence in developing e-learning ." Ao, S. I., Castillo, O., Douglas, C., Feng, D. D. and Lee, J.-A. (ed.) 2011 International MultiConference of Engineers and Computer Scientists (IMECS 2011) . Kowloon, China 16 - 18 Mar 2011 Hong Kong.
Intervening to improve the dissertation of final year engineering research projects
Goh, Steven and Ku, Harry. 2011. "Intervening to improve the dissertation of final year engineering research projects." Kellogg, Stuart and Karlin, Jennifer (ed.) 41st ASEE/IEEE Frontiers in Education Conference (FIE 2011): Celebrating 41 Years of Monumental Innovations from around the World. Rapid City, United States 12 - 15 Oct 2011 Piscataway, NJ, United States.
Tensile tests of glass powder reinforced epoxy composites: pilot study
Ku, H., Wong, P., Huang, J., Fung, H. and Mohan, T.. 2011. "Tensile tests of glass powder reinforced epoxy composites: pilot study ." Zhu, Zeng (ed.) ICKEM 2011: 1st International Conference on Key Engineering Materials. Sanya, China 25 - 27 Mar 2011 Stafa-Zurich, Switzerland. https://doi.org/10.4028/www.scientific.net/AMR.214.1
Cure shrinkage in epoxy grouts for grouted repairs
Shamsuddoha, Md, Islam, Md Mainul, Aravinthan, Thiru, Manalo, Allan and Lau, Kin-tak. 2013. "Cure shrinkage in epoxy grouts for grouted repairs." Epaarachchi, Jayantha A., Lau, Alan Kin-tak and Leng, Jinsong (ed.) 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013). Gold Coast, Australia 10 - 12 Jul 2013 United States. https://doi.org/10.1117/12.2028085
Wear and frictional behaviour of metals
Alotaibi, J. G., Yousif, B. F. and Yusaf, T. F.. 2014. "Wear and frictional behaviour of metals." Kida, Katsuyuki (ed.) 3rd International Conference on Advanced Materials and Engineering Materials (ICAMEM 2013). Singapore 14 - 15 Dec 2013 Zurich, Switzerland. https://doi.org/10.4028/www.scientific.net/AMR.893.430
Selection of hemp fabric as reinforcement in composite materials
Misnon, Mohd Iqbal, Islam, Md Mainul, Epaarachchi, Jayantha Ananda and Lau, Kin-tak. 2014. "Selection of hemp fabric as reinforcement in composite materials." Mashud, Mohammad (ed.) 3rd International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE 2014). Khulna, Bangladesh 26 - 27 Dec 2014 Khulna, Bangladesh.
An investigation on tensile, compression and flexural properties of natural fibre reinforced polyester composites
Yousif, B. F., Jye, W. K. and El-Tayeb, N. S. M.. 2007. "An investigation on tensile, compression and flexural properties of natural fibre reinforced polyester composites." 2007 ASME International Mechanical Engineering Congress and Exposition (IMECE 2007). Seattle, United States of America 11 - 15 Nov 2007 Boston, Massachusetts, USA.
Investigation on interfacial adhesion of date palm/epoxy using fragmentation technique
Shalwan, A. and Yousif, B. F.. 2014. "Investigation on interfacial adhesion of date palm/epoxy using fragmentation technique." Materials and Design. 53, pp. 928-937. https://doi.org/10.1016/j.matdes.2013.07.083
Woven hemp fabric reinforced vinyl ester composite: effect of water absorption on the mechanical properties degradation
Misnon, Mohd Iqbal, Islam, Md Mainul, Epaarachchi, Jayantha Ananda, Wang, Hao and Lau, Kin-tak. 2016. "Woven hemp fabric reinforced vinyl ester composite: effect of water absorption on the mechanical properties degradation." International Journal of Advances in Science, Engineering and Technology (IJASEAT). 4 (3), pp. 96-101.
Effect of elevated temperature on the tensile properties of recycled mixed plastic waste
Bajracharya, Rohan Muni, Manalo, Allan C., Karunasena, Warna and Lau, Kin-tak. 2014. "Effect of elevated temperature on the tensile properties of recycled mixed plastic waste." Smith, S. T. (ed.) 23rd Australasian Conference on the Mechanics of Structures and Materials (ACMSM23). Byron Bay, Australia 09 - 12 Dec 2014 Lismore, Australia.
Glass fibre and recycled mixed plastic wastes: recent developments and applications
Bajracharya, Rohan M., Manalo, Allan C., Karunasena, Warna and Lau, Kin-tak. 2014. "Glass fibre and recycled mixed plastic wastes: recent developments and applications." Smith, S. T. (ed.) 23rd Australasian Conference on the Mechanics of Structures and Materials (ACMSM23). Byron Bay, Australia 09 - 12 Dec 2014 Australia.
Important aspects of finite element modeling of low density thermo plastic closed cell foams
Thota, N. M., Epaarachchi, J. A. and Lau, K. T.. 2013. "Important aspects of finite element modeling of low density thermo plastic closed cell foams." Mishra, G. C. and Sanskriti, Krishi (ed.) 3rd World Congress on Frontiers of Mechanical, Aerospace and Automotive Engineering (WCFMAAE 2013). New Delhi, India 02 - 03 Feb 2013 New Delhi, India.
Experimental and theoretical studies on the properties of injection moulded glass fibre reinforced mixed plastics composites
Bajracharya, Rohan Muni, Manalo, Allan C., Karunasena, Warna and Lau, Kin-tak. 2016. "Experimental and theoretical studies on the properties of injection moulded glass fibre reinforced mixed plastics composites." Composites Part A: Applied Science and Manufacturing. 84, pp. 393-405. https://doi.org/10.1016/j.compositesa.2016.02.025
Behaviour of new building products from recycled-mixed plastic wastes
Bajracharya, Rohan Muni, Manalo, Allan C., Karunasena, Warna and Lau, Kin-tak. 2015. "Behaviour of new building products from recycled-mixed plastic wastes." 12th Composites Australia and CRC-ACS Conference 2015: Game On! Winning with Composites. Gold Coast, Australia 21 - 23 Apr 2015
Characterisation of recycled mixed plastic solid wastes: coupon and full-scale investigation
Bajracharya, Rohan Muni, Manalo, Allan C., Karunasena, Warna and Lau, Kin-tak. 2016. "Characterisation of recycled mixed plastic solid wastes: coupon and full-scale investigation." Waste Management. 48, pp. 72-80. https://doi.org/10.1016/j.wasman.2015.11.017
Natural fibers and their characterization
Azwa, Z. N., Yousif, B. F., Manalo, A. C. and Karunasena, W.. 2016. "Natural fibers and their characterization." Campilho, R. D. S. G. (ed.) Natural fiber composites. Boca Raton, FL, United States. CRC Press. pp. 35-64
Biolubricants and the potential of waste cooking oil
Alotaibi, J. G. and Yousif, B. F.. 2016. "Biolubricants and the potential of waste cooking oil." Davim, J. Paulo (ed.) Ecotribology, research developments. Switzerland. Springer. pp. 125-143
Two-body abrasion of bamboo fibre/epoxy composites
Oun, A. and Yousif, B. F.. 2016. "Two-body abrasion of bamboo fibre/epoxy composites." Davim, J. Paulo (ed.) Ecotribology, research developments. Switzerland. Springer. pp. 145-172
Influence of metal coating on sorghum milling process subjected to three body abrasion
Al-Sandooq, Jaafar Mahdi, Yousif, Belal and Jensen, T. A.. 2015. "Influence of metal coating on sorghum milling process subjected to three body abrasion." International Journal of Precision Technology. 5 (1), pp. 27-42. https://doi.org/10.1504/IJPTECH.2015.069972
Editor's introduction to special theme issue [of International Journal of Precision Technology]: Precision engineering and tribology
Yousif, Belal. 2015. "Editor's introduction to special theme issue [of International Journal of Precision Technology]: Precision engineering and tribology." International Journal of Precision Technology. 5 (1).
Analyses of woven hemp fabric characteristics for composite reinforcement
Misnon, M. I., Islam, M. M., Epaarachchi, J. A. and Lau, K. T.. 2015. "Analyses of woven hemp fabric characteristics for composite reinforcement." Materials and Design. 66 (A), pp. 82-92. https://doi.org/10.1016/j.matdes.2014.10.037
Effects of alkali treatment and elevated temperature on the mechanical properties of bamboo fibre-polyester composites
Manalo, Allan C., Wani, Evans, Zulkarnain, Noor Azwa, Karunasena, Warna and Lau, Kin-tak. 2015. "Effects of alkali treatment and elevated temperature on the mechanical properties of bamboo fibre-polyester composites." Composites Part B: Engineering. 80 (1), pp. 73-83. https://doi.org/10.1016/j.compositesb.2015.05.033
Improvement on the properties of polylactic acid (PLA) using bamboo charcoal particles
Ho, Mei-po, Lau, Kin-tak, Wang, Hao and Hui, David. 2015. "Improvement on the properties of polylactic acid (PLA) using bamboo charcoal particles." Composites Part B: Engineering. 81, pp. 14-25. https://doi.org/10.1016/j.compositesb.2015.05.048
Brass, aluminium, and mild steel sliding against stainless steel under dry conditions
Alotaibi, J. G., Yousif, B. F. and Yusaf, T. F.. 2015. "Brass, aluminium, and mild steel sliding against stainless steel under dry conditions." International Journal of Precision Technology. 5 (2), pp. 85-96.
Hemp reinforced composites with alkalization and acetylation fibre treatments
Wang, H., Kabir, M. M. and Lau, K. T.. 2014. "Hemp reinforced composites with alkalization and acetylation fibre treatments." Polymers and Polymer Composites. 22 (3), pp. 247-252. https://doi.org/10.1177/096739111402200
Multimedia resources in engineering
Yousif, B. F., Basson, Marita and Hobohm, Carola. 2014. "Multimedia resources in engineering." Davim, J. Paulo (ed.) Modern mechanical engineering: research, development and education. Heidelberg, Germany. Springer. pp. 449-461
Wear behaviour and mechanism of different metals sliding against stainless steel counterface
Alotaibi, J. G., Yousif, B. F. and Yusaf, T. F.. 2014. "Wear behaviour and mechanism of different metals sliding against stainless steel counterface." Proceedings of the Institution of Mechanical Engineers Part J: Journal of Engineering Tribology. 228 (6), pp. 692-704. https://doi.org/10.1177/1350650114527072
Effect of SiC addition on mechanical and wear characteristics of WC-32(W-Ti)C-6Co cemented carbides
Albdiry, M. T. and Yousif, B. F.. 2014. "Effect of SiC addition on mechanical and wear characteristics of WC-32(W-Ti)C-6Co cemented carbides." International Journal of Precision Technology. 4 (1/2), pp. 110-121. https://doi.org/10.1504/IJPTECH.2014.060611
Role of silanized halloysite nanotubes on structural, mechanical properties and fracture toughness of thermoset nanocomposites
Albdiry, M. T. and Yousif, B. F.. 2014. "Role of silanized halloysite nanotubes on structural, mechanical properties and fracture toughness of thermoset nanocomposites." Materials and Design. 57, pp. 279-288. https://doi.org/10.1016/j.matdes.2013.12.017
Evaluation of the blunt thoracic trauma caused by solid sports ball impacts
Thota, Narasimha, Epaarachchi, Jayantha and Lau, Kin Tak. 2015. "Evaluation of the blunt thoracic trauma caused by solid sports ball impacts." Journal of Biomechanical Science and Engineering. 10 (2). https://doi.org/10.1299/jbse.14-00264
Influence of date palm fibre and graphite filler on mechanical and wear characteristics of epoxy composites
Shalwan, A. and Yousif, B. F.. 2014. "Influence of date palm fibre and graphite filler on mechanical and wear characteristics of epoxy composites." Materials and Design. 59, pp. 264-273. https://doi.org/10.1016/j.matdes.2014.02.066
Natural composites for bettering the environment [Keynote]
Lau, Alan K. T.. 2012. "Natural composites for bettering the environment [Keynote]." BIT's 1st Annual World Congress of Advanced Materials (WCAM 2012):Innovation, Cutting-Edge, and Smartness . Beijing, China 06 - 08 Jun 2012
Viscous criterion and its relation with the projectile-thorax energy interactions
Thota, Narasimha, Epaarachchi, Jayantha and Lau, Kin Tak. 2014. "Viscous criterion and its relation with the projectile-thorax energy interactions." 8th Australasian Congress on Applied Mechanics (ACAM 8). Melbourne, Australia 24 - 28 Nov 2014
Evaluation of the blunt thoracic trauma due to baseball impacts – review of the Blunt Criterion
Thota, Narasimha M., Epaarachchi, Jayantha A. and Lau, Kin Tak. 2014. "Evaluation of the blunt thoracic trauma due to baseball impacts – review of the Blunt Criterion." 8th Australasian Congress on Applied Mechanics (ACAM 8). Melbourne, Australia 24 - 28 Nov 2014
Effect of energy absorbing mechanisms on the blunt thoracic trauma caused by ballistic impacts
Thota, Narasimha M., Epaarachchi, Jayantha A. and Lau, Kin Tak. 2014. "Effect of energy absorbing mechanisms on the blunt thoracic trauma caused by ballistic impacts." 8th Australasian Congress on Applied Mechanics (ACAM 8). Melbourne, Australia 24 - 28 Nov 2014
Review of anthropomorphic test dummies for the evaluation of thoracic trauma due to blunt ballistic impacts
Thota, Narasimha M., Epaarachchi, Jayantha A. and Lau, Kin Tak. 2014. "Review of anthropomorphic test dummies for the evaluation of thoracic trauma due to blunt ballistic impacts." 8th Australasian Congress on Applied Mechanics (ACAM 8). Melbourne, Australia 24 - 28 Nov 2014
Impact location determination on thin laminated composite plates using an NIR-FBG sensor system
Hafizi, Z. M., Epaarachchi, J. and Lau, K. T.. 2015. "Impact location determination on thin laminated composite plates using an NIR-FBG sensor system." Measurement. 61, pp. 51-57. https://doi.org/10.1016/j.measurement.2014.08.040
Recent research trend in marine engineering materials (Keynote lecture)
Lau, Kin-Tak. 2010. "Recent research trend in marine engineering materials (Keynote lecture) ." 160th Eastern Forum of Sciences and Technology . Shanghai, China 20 - 21 Sep 2011
Kenaf fibers for tribo-thermoplastic composites
Singh, Narish, Rilling, Dirk and Yousif, B. F.. 2010. "Kenaf fibers for tribo-thermoplastic composites." Ghia, Urmila (ed.) 2009 ASME International Mechanical Engineering Congress and Exposition (IMECE 2009). Florida, United States of America 13 - 19 Nov 2009 United States. https://doi.org/10.1115/IMECE2009-10167
New technique measuring film thickness for tribological machines
Al-Haddad, A. A., Salih, Nbhan D., Wen, Chin Chee, Yusaf, T. F. and Yousif, B. F.. 2010. "New technique measuring film thickness for tribological machines." 2009 ASME International Mechanical Engineering Congress and Exposition (IMECE 2009). Florida, United States of America 13 - 19 Nov 2009 United States. https://doi.org/10.1115/IMECE2009-10160
Design of film thickness instrument for fibre polymer composites tribological experiments
Yousif, B. F., Al-Haddad, A., Alotaibi, J. GH. and Yusaf, T. F.. 2014. "Design of film thickness instrument for fibre polymer composites tribological experiments." Journal of Engineering Science and Technology. 9 (2), pp. 154-166.
High-stress three-body abrasive wear of treated and untreated oil palm fibre-reinforced polyester composites
Yousif, B. F. and El-Tayeb, N. S. M.. 2008. "High-stress three-body abrasive wear of treated and untreated oil palm fibre-reinforced polyester composites." Proceedings of the Institution of Mechanical Engineers Part J: Journal of Engineering Tribology. 222 (5), pp. 637-646. https://doi.org/10.1243/13506501JET412
CAE simulation based methodology for airbag compliant vehicle front protection system development
Thota, Narasimha, Epaarachchi, Jayantha and Lau, Kin Tak. 2013. "CAE simulation based methodology for airbag compliant vehicle front protection system development." International Journal of Vehicle Structures and Systems. 5 (3-4), pp. 95-104. https://doi.org/10.4273/ijvss.5.3-4.04
On the effect of roller materials on the power window mechanism from a tribological perspective
Chee, S. B., Shalabi, Ammar Al, Chin, C. W. and Yousif, B. F.. 2009. "On the effect of roller materials on the power window mechanism from a tribological perspective." 2008 ASME International Mechanical Engineering Congress and Exposition (IMECE 2008). Boston, United States of America 31 Oct - 06 Nov 2008 New York, NY. United States. https://doi.org/10.1115/IMECE2008-66112
On the mechanical properties of a treated betelnut fibre-reinforced polyester composite
Yousif, B. F. and Nirmal, U.. 2010. "On the mechanical properties of a treated betelnut fibre-reinforced polyester composite." Proceedings of the Institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science. 224 (9), pp. 1805-1814. https://doi.org/10.1243/09544062JMES1943
Framework for orienting engineering undergraduate final year projects towards new product innovation process
Al-Shalabi, Ammar, Chee, S. B., Singh, Narish and Yousif, B. F.. 2008. "Framework for orienting engineering undergraduate final year projects towards new product innovation process." Soliman, Khalid S. (ed.) 10th Conference on Innovation and Knowledge Management in Business Globalization (IBIMA 2008). Kuala Lumpur, Malaysia 30 Jun - 01 Jul 2008 Norristown, PA. United States.
The effect of treatment on tribo-performance of CFRP composites
Yousif, Belal F., Leong, Ong B., Ong, Low K. and Jye, Wong K.. 2009. "The effect of treatment on tribo-performance of CFRP composites." Recent Patents on Materials Science. 2 (1), pp. 67-74. https://doi.org/10.2174/1874464810902010067
Wear and friction characteristics of CGRP composite under wet contact condition using two different test techniques
Yousif, B. F. and El-Tayeb, N. S. M.. 2008. "Wear and friction characteristics of CGRP composite under wet contact condition using two different test techniques." Wear. 265 (5-6), pp. 856-864. https://doi.org/10.1016/j.wear.2008.01.016
Potentiality of utilising natural textile materials for engineering composites applications
Misnon, Mohd Iqbal, Islam, Md Mainul, Epaarachchi, Jayantha Ananda and Lau, Kin-tak. 2014. "Potentiality of utilising natural textile materials for engineering composites applications." Materials and Design. 59, pp. 359-368. https://doi.org/10.1016/j.matdes.2014.03.022
Development and validation of a thorax surrogate FE model for assessment of trauma due to high speed blunt impacts
Thota, Narasimha, Epaarachchi, Jayantha and Lau, Kin-Tak. 2014. "Development and validation of a thorax surrogate FE model for assessment of trauma due to high speed blunt impacts." Journal of Biomechanical Science and Engineering. 9 (1), pp. 08-1. https://doi.org/10.1299/jbse.2014jbse0008
Machinability of glass/date palm fibre epoxy composites
Alsaeed, T. and Yousif, B. F.. 2014. "Machinability of glass/date palm fibre epoxy composites." International Journal of Machining and Machinability of Materials. 16 (2), pp. 129-150. https://doi.org/10.1504/IJMMM.2014.064685
Glass-fibre reinforced recycled mixed plastics (GMP): totally recyclable and renewable composites
Bajracharya, Rohan Muni, Manalo, Allan, Karunasena, Karu and Lau, Kin-tak. 2014. "Glass-fibre reinforced recycled mixed plastics (GMP): totally recyclable and renewable composites." IEEE Australia and New Zealand Student and Young Professional Congress (ANZSCON 2014). Brisbane, Australia 03 - 05 Jul 2014
Optimization effect of micro hardness by nanoclay clusters in nanoclay/epoxy composites
Lam, Chun-Ki and Lau, Kin-Tak. 2009. "Optimization effect of micro hardness by nanoclay clusters in nanoclay/epoxy composites ." Journal of Thermoplastic Composite Materials. 22 (2), pp. 213-225. https://doi.org/10.1177/0892705708091856
Polycarbonate-carbon nanofibers composites: an electron spin resonance study
Chipara, Mircea, Brittain, Wiliam J., Lau, Kin-Tak and Chipara, Magdalena Dorina. 2008. "Polycarbonate-carbon nanofibers composites: an electron spin resonance study ." Polymers and Polymer Composites. 16 (8), pp. 519-526.
Chemical treatments on hemp fibre composites
Wang, Hao, Kabir, Mazed and Lau, K. T.. 2013. "Chemical treatments on hemp fibre composites." Wang, Xungai (ed.) Fiber Society Spring 2013 Technical Conference (FS 2013): Advancing Scientific Knowledge Pertaining to Fibers and Fibrous Materials. Geelong, Australia 22 - 24 May 2013 Raleigh, NC. United States.
Analysis of heat-treated bovine cortical bone by thermal gravimetric and nanoindentation
Lau, Mei-ling, Lau, Kin-tak, Ku, Harry, Cardona, Francisco and Lee, Joong-Hee. 2013. "Analysis of heat-treated bovine cortical bone by thermal gravimetric and nanoindentation ." Composites Part B: Engineering. 55, pp. 447-452. https://doi.org/10.1016/j.compositesb.2013.06.027
An investigation of acoustic emission signal attenuation for monitoring of progressive failure in fiberglass reinforced composite laminates
Hafizi, Z. M., Epaarachchi, J. and Lau, K. T.. 2013. "An investigation of acoustic emission signal attenuation for monitoring of progressive failure in fiberglass reinforced composite laminates ." International Journal of Automotive and Mechanical Engineering. 8 (1), pp. 1442-1456. https://doi.org/10.15282/ijame.8.2013.31.0119
Effects of processing conditions of poly(methylmethacrylate) encapsulated liquid curing agent on the properties of self-healing composites
Li, Qi, Mishra, Ananta Kumar, Kim, Nam Hoon, Kuila, Tapas, Lau, Kin-tak and Lee, Joong Hee. 2013. "Effects of processing conditions of poly(methylmethacrylate) encapsulated liquid curing agent on the properties of self-healing composites ." Composites Part B: Engineering. 49, pp. 6-15. https://doi.org/10.1016/j.compositesb.2013.01.011
Hemp and hemp-based composites
Wang, Hao and Lau, Alan K.T.. 2013. "Hemp and hemp-based composites." Thakur, Vijay Kumar (ed.) Green composites from natural resources. Boca Raton, FL. United States. CRC Press. pp. 63-94
An overview of mechanical properties and durability of glass-fibre reinforced recycled mixed plastic waste composites
Bajracharya, Rohan Muni, Manalo, Allan C., Karunasena, Warna and Lau, Kin-tak. 2014. "An overview of mechanical properties and durability of glass-fibre reinforced recycled mixed plastic waste composites." Materials and Design. 62, pp. 98-112. https://doi.org/10.1016/j.matdes.2014.04.081
Tensile properties of glass fibre reinforced recycled mixed plastic composites
Bajracharya, Rohan Muni, Manalo, Allan C., Karunasena, Warna and Lau, Kin-tak. 2014. "Tensile properties of glass fibre reinforced recycled mixed plastic composites." Australasian Composites Conference (CA 2014): Materials for a Lighter and Smarter World. Newcastle, Australia 07 - 09 Apr 2014 Melbourne, Australia.
Correlation between frictional force, interface temperature and specific wear rate of fibre polymer composites
Arhaim, Y. H, Shalwan, A. and Yousif, B. F.. 2013. "Correlation between frictional force, interface temperature and specific wear rate of fibre polymer composites." Advanced Materials Research. 685 (685), pp. 45-49. https://doi.org/10.4028/www.scientific.net/AMR.685.45
In state of art: mechanical and tribological behaviour of polymeric composites based on natural fibres
Shalwan, A. and Yousif, B. F.. 2013. "In state of art: mechanical and tribological behaviour of polymeric composites based on natural fibres." Materials and Design. 48, pp. 14-24. https://doi.org/10.1016/j.matdes.2012.07.014
Using computer software packages to enhance the teaching in engineering management science part 4 – quality control
Ku, Harry Siu-lung. 2013. "Using computer software packages to enhance the teaching in engineering management science part 4 – quality control ." Ao, S. I., Castillo, O., Douglas, C., Feng, David and Lee, Jeong-A. (ed.) International MultiConference of Engineers and Computer Scientists (IMECS 2013). Kowloon, Hong Kong 13 - 15 Mar 2013 Hong Kong.
Fracture toughness and toughening mechanisms of unsaturated polyester-based clay nanocomposites
Albdiry, Mushtaq T., Yousif, Belal F. and Ku, Harry. 2013. "Fracture toughness and toughening mechanisms of unsaturated polyester-based clay nanocomposites." 13th International Conference on Fracture (ICF 2013). Beijing, China 16 - 21 Jun 2013 Anhui, China.
A review on the degradability of polymeric composites based on natural fibres
Azwa, Z. N., Yousif, B. F., Manalo, A. C. and Karunasena, W.. 2013. "A review on the degradability of polymeric composites based on natural fibres." Materials and Design. 47, pp. 424-442. https://doi.org/10.1016/j.matdes.2012.11.025
Performance analysis of journal bearings using ultrasonic reflection
Kasolang, S., Ahmed, Diyar I., Dwyer-Joyce, R. S. and Yousif, B. F.. 2013. "Performance analysis of journal bearings using ultrasonic reflection." Tribology International. 64, pp. 78-84. https://doi.org/10.1016/j.triboint.2013.02.012
Effectiveness of using fibre-reinforced polymer composites for underwater steel pipeline repairs
Shamsuddoha, Md, Islam, Md Mainul, Aravinthan, Thiru, Manalo, Allan and Lau, Kin-tak. 2013. "Effectiveness of using fibre-reinforced polymer composites for underwater steel pipeline repairs." Composite Structures. 100, pp. 40-54. https://doi.org/10.1016/j.compstruct.2012.12.019
Prediction of obsolete FBG sensor using ANN for efficient and robust operation of SHM systems
Kahandawa, Gayan C., Epaarachchi, Jayantha A., Wang, Hao and Lau, K. T.. 2013. "Prediction of obsolete FBG sensor using ANN for efficient and robust operation of SHM systems." 4th Asia-Pacific Workshop on Structural Health Monitoring (APWSHM 2012). Melbourne, Australia 05 - 07 Dec 2012 Zurich, Switzerland. https://doi.org/10.4028/www.scientific.net/KEM.558.546
Mechanical properties of bamboo fiber-polyester composites
Manalo, A. C., Karunasena, W. and Lau, K. T.. 2013. "Mechanical properties of bamboo fiber-polyester composites." Samali, Bijan, Attard, Mario and Song, Chongmin (ed.) 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM22). Sydney, Australia 11 - 14 Dec 2012 Leiden, Netherlands.
Smart structure for small wind turbine blade
Supeni, E. E., Epaarachchi, J. A., Islam, M. M. and Lau, K. T.. 2013. "Smart structure for small wind turbine blade." Epaarachchi, Jayantha A., Lau, Alan Kin-tak and Leng, Jinsong (ed.) 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013). Gold Coast, Australia 10 - 12 Jul 2013 United States. https://doi.org/10.1117/12.2027725
Mechanical properties of epoxy grouts for structural repair
Shamsuddoha, M., Islam, M. M., Aravinthan, T., Manalo, A. C. and Lau, K. T.. 2013. "Mechanical properties of epoxy grouts for structural repair." Samali, Bijan, Attard, Mario M. and Song, Chongmin (ed.) 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM22). Sydney, Australia 11 - 14 Dec 2012 London, United Kingdom.
Structural evaluation of concrete expanded polystyrene sandwich panels for slab applications
Bajracharya, R. M., Lokuge, W. P., Karunasena, W., Lau, K. T. and Mosallam, A. S.. 2013. "Structural evaluation of concrete expanded polystyrene sandwich panels for slab applications." Samali, Bijan, Attard, Mario M. and Song, Chongmin (ed.) 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM22). Sydney, Australia 11 - 14 Dec 2012 London, United Kingdom.
Effect of coarse filler on shrinkages and dynamic mechanical properties of epoxy grouts
Shamsuddoha, Md, Islam, Md Mainul, Aravinthan, Thiru, Manalo, Allan and Lau, Kin-Tak. 2014. "Effect of coarse filler on shrinkages and dynamic mechanical properties of epoxy grouts." Journal of Multifunctional Composites. 2 (1), pp. 61-66. https://doi.org/10.12783/issn.2168-4286/2.1/
Sustainable composites
Yousif, Belal F., Islam, Md Mainul and Salit, Mohd Sapuan. 2013. "Sustainable composites." Advances in Materials Science and Engineering. https://doi.org/10.1155/2013/142718
Impact fracture behaviour of silane-treated halloysite nanotubes-reinforced unsaturated polyester
Albdiry, M. T., Ku, H. and Yousif, B. F.. 2013. "Impact fracture behaviour of silane-treated halloysite nanotubes-reinforced unsaturated polyester." Engineering Failure Analysis. 35, pp. 718-725. https://doi.org/10.1016/j.engfailanal.2013.06.027
Tensile properties of nanoclay reinforced epoxy composites
Ku, H. and Trada, Mohan. 2013. "Tensile properties of nanoclay reinforced epoxy composites." Epaarachchi, Jayantha A. , Lau, Alan Kin-tak and Leng, Jinsong (ed.) 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013). Gold Coast, Australia 10 - 12 Jul 2013 Bellingham, WA. United States. https://doi.org/10.1117/12.2026644
Embedded fibre optic sensors under multi-axial loading: a pilot study
Peauril, J., Epaarachchi, J., Lau, K. T. and Wang, H.. 2013. "Embedded fibre optic sensors under multi-axial loading: a pilot study." Epaarachchi, Jayantha A. , Lau, Alan Kin-tak and Leng, Jinsong (ed.) 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013). Gold Coast, Australia 10 - 12 Jul 2013 Bellingham, WA. United States. SPIE. https://doi.org/10.1117/12.2027958
NIR fibre bragg grating as dynamic sensor: an application of 1D digital wavelet analysis for signal denoising
Hafizi, Z. M., Kahandawa, G. C., Epaarachchi, J., Lau, K. T., Canning, J. and Cook, K.. 2013. "NIR fibre bragg grating as dynamic sensor: an application of 1D digital wavelet analysis for signal denoising ." Epaarachchi, Jayantha A. , Lau, Alan Kin-tak and Leng, Jinsong (ed.) 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013). Gold Coast, Australia 10 - 12 Jul 2013 Bellingham, WA. United States. https://doi.org/10.1117/12.2026668
Characteristics of kenaf fibre/epoxy composites subjected to thermal degradation
Azwa, Z. N. and Yousif, B. F.. 2013. "Characteristics of kenaf fibre/epoxy composites subjected to thermal degradation." Polymer Degradation and Stability. 98 (12), pp. 2752-2759. https://doi.org/10.1016/j.polymdegradstab.2013.10.008
Characterisation of mechanical and thermal properties of epoxy grouts for composite repair of steel pipelines
Shamsuddoha, Md, Islam, Md Mainul, Aravinthan, Thiru, Manalo, Allan and Lau, Kin-tak. 2013. "Characterisation of mechanical and thermal properties of epoxy grouts for composite repair of steel pipelines." Materials and Design. 52, pp. 315-327. https://doi.org/10.1016/j.matdes.2013.05.068
Study on compressive properties of syntactic foams for marine applications
Salleh, Z., Islam, M. M. and Ku, H.. 2014. "Study on compressive properties of syntactic foams for marine applications." Journal of Multifunctional Composites. 2 (1), pp. 21-27. https://doi.org/10.12783/issn.2168-4286/2.1/Salleh
Indexing damage using distortion of embedded FBG sensor response spectra
Kahandawa, Gayan C., Epaarachchi, Jayantha A. and Lau, K. T.. 2013. "Indexing damage using distortion of embedded FBG sensor response spectra ." Epaarachchi, Jayantha A. , Lau, Alan Kin-tak and Leng, Jinsong (ed.) 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013). Gold Coast, Australia 10 - 12 Jul 2013 Bellingham, WA. United States. https://doi.org/10.1117/12.2027945
Surface coating of poly-D-L-lactide/nano-hydroxyapatite composite scaffolds for dexamethasone-releasing function and wettability enhancement
Chen, Ling, Tang, Chak Yin, Ku, Harry Siu Lung, Chen, Da Zhu and Tsui, Chi Pong. 2013. "Surface coating of poly-D-L-lactide/nano-hydroxyapatite composite scaffolds for dexamethasone-releasing function and wettability enhancement." Bose, Susmita, Narayan, Roger and Bandyopadhyay , Amit (ed.) Materials Science and Technology Conference (MS&T 2012): Next Generation Biomaterials and Surface Properties of Biomaterials . Pittsburgh, United States 27 - 31 Oct 2012 Hoboken, NJ. United States. https://doi.org/10.1002/9781118751015
Microwave sintering and characterization of polypropylene/multi-walled carbon nanotube/hydroxyapatite composites
Chen, Ling, Tang, Chak Yin, Ku, Harry Siu-Lung, Tsui, Chi Pong and Chen, Xu. 2014. "Microwave sintering and characterization of polypropylene/multi-walled carbon nanotube/hydroxyapatite composites ." Composites Part B: Engineering. 56, pp. 504-511. https://doi.org/10.1016/j.compositesb.2013.08.005
Wireless tablet PCs for enhanced teaching at an Australian regional university teaching both campus and distance modes
Goh, Steven Chingnam, Galligan, Linda Ann and Ku, Harry. 2013. "Wireless tablet PCs for enhanced teaching at an Australian regional university teaching both campus and distance modes." 120th American Society for Engineering Education Annual Conference and Exposition (ASEE 2013): Engineering Education: Frankly, We Do Give a D*mn. Atlanta, GA. United States 23 - 26 Jun 2013 Washington, DC. United States.
Fuzzy logic based model to predict maximum oil-film pressure in journal bearing
Ahmed, Diyar I., Kasolang, S., Khidhir, Basim A. and Yousif, B. F.. 2013. "Fuzzy logic based model to predict maximum oil-film pressure in journal bearing." Research Journal of Applied Sciences, Engineering and Technology. 6 (20), pp. 3871-3878.
Extraction and processing of real time strain of embedded FBG sensors using a fixed filter FBG circuit and an artificial neural network
Kahandawa, Gayan C., Epaarachchi, Jayantha, Wang, Hao, Canning, John and Lau, K. T.. 2013. "Extraction and processing of real time strain of embedded FBG sensors using a fixed filter FBG circuit and an artificial neural network." Measurement. 46 (10), pp. 4045-4051. https://doi.org/10.1016/j.measurement.2013.07.029
Thermal degredation study of kenaf fibre/epoxy composites using thermo gravimetric analysis
Azwa, Z. N. and Yousif, B. F.. 2013. "Thermal degredation study of kenaf fibre/epoxy composites using thermo gravimetric analysis." 3rd Malaysian Postgraduate Conference (MPC 2013). Sydney, Australia 04 - 05 Jul 2013 Sydney, Australia.
Development of artificial neural network model in predicting performance of the smart wind turbine blade
Supeni, E. E., Epaarachchi, J. A., Islam, M. M. and Lau, K. T.. 2013. "Development of artificial neural network model in predicting performance of the smart wind turbine blade." 3rd Malaysian Postgraduate Conference (MPC 2013). Sydney, Australia 04 - 05 Jul 2013 Sydney, Australia.
Textile material forms for reinforcement materials: a review
Misnon, M. I., Islam, M. M., Epaarachchi, J. and Lau, K. T.. 2013. "Textile material forms for reinforcement materials: a review." 3rd Malaysian Postgraduate Conference (MPC 2013). Sydney, Australia 04 - 05 Jul 2013 Sydney, Australia.
Wave propogation scattering due to defect on thin composite plates
Hafizi, Z. M., Epaarachchi, J. and Lau, K. T.. 2013. "Wave propogation scattering due to defect on thin composite plates." 3rd Malaysian Postgraduate Conference (MPC 2013). Sydney, Australia 04 - 05 Jul 2013 Sydney, Australia.
Tensile behaviours of activated carbon coconut shell filled epoxy composites
Salleh, Z., Islam, M. M. and Ku, H.. 2013. "Tensile behaviours of activated carbon coconut shell filled epoxy composites." Noor, M. M., Rahman, M. M. and Ismail, J. (ed.) 3rd Malaysian Postgraduate Conference (MPC 2013). Sydney, Australia 04 - 05 Jul 2013 Sydney, Australia.
Estimation of strain of distorted FBG sensor spectra using a fixed FBG filter circuit and an artificial neural network
Kahandawa, Gayan C., Epaarachchi, Jayantha, Lau, K. T. and Canning, John. 2013. "Estimation of strain of distorted FBG sensor spectra using a fixed FBG filter circuit and an artificial neural network ." Palaniswami, M., Leckie, C., Kanhere, S. and Gubbi, J. (ed.) IEEE 8th International Conference on Intelligent Sensors, Sensor Networks and Information Processing (ISSNIP 2013): Sensing the Future. Melbourne, Australia 02 - 05 Apr 2013 Piscataway, NJ. United States. https://doi.org/10.1109/ISSNIP.2013.6529770
Effect of the energy absorbing mechanisms on the blunt thoracic trauma caused by a typical foam projectile
Thota, Narasimha M., Epaarachchi, Jayantha A. and Lau, Kin-tak. 2013. "Effect of the energy absorbing mechanisms on the blunt thoracic trauma caused by a typical foam projectile." Mishra, G. C. and Sanskriti, Krishi (ed.) 3rd World Congress on Frontiers of Mechanical, Aerospace and Automotive Engineering (WCFMAAE 2013). New Delhi, India 02 - 03 Feb 2013 New Delhi, India.
Effect of the foam embellishments on the pedestrian safety of the vehicle front protection systems
Thota, N. M., Epaarachchi, J. A. and Lau, K. T.. 2013. "Effect of the foam embellishments on the pedestrian safety of the vehicle front protection systems." Mishra, G. C. and Sanskriti, Krishi (ed.) 3rd World Congress on Frontiers of Mechanical, Aerospace and Automotive Engineering (WCFMAAE 2013). New Delhi, India 02 - 03 Feb 2013 New Delhi, India.
Effects of chemical treatments on hemp fibre structure
Kabir, M. M., Wang, H., Lau, K. T. and Cardona, F.. 2013. "Effects of chemical treatments on hemp fibre structure." Applied Surface Science. 276, pp. 13-23. https://doi.org/10.1016/j.apsusc.2013.02.086
Tensile properties of chemically treated hemp fibres as reinforcement for composites
Kabir, M. M., Wang, H., Lau, K. T. and Cardona, F.. 2013. "Tensile properties of chemically treated hemp fibres as reinforcement for composites." Composites Part B: Engineering. 53, pp. 362-368. https://doi.org/10.1016/j.compositesb.2013.05.048
Nafion-peptized laponite clay nanocomposite membrane for PEMFC
Mishra, Ananta Kumar, Bae, Seon-Hyeong, Kim, Nam Hoon, Lau, Kin-tak and Lee, Joong Hee. 2012. "Nafion-peptized laponite clay nanocomposite membrane for PEMFC ." Lau, Alan K-T, Srivatsan, T. S., Bhattacharyya, Debes, Zhang, Ming Qiu and Ho, Mabel M. P. (ed.) 20th International Symposium on Processing and Fabrication of Advanced Materials (PFAM 20). Hong Kong 15 - 18 Dec 2011 Zurich, Switzerland . https://doi.org/10.4028/www.scientific.net/AMR.410.148
Fibre composites for high pressure pipeline repairs, in-air and subsea: an overview
Shamsuddoha, Md, Islam, Md Mainul, Aravinthan, Thiru, Manalo, Allan, Lau, Kin-tak and Elder, David. 2012. "Fibre composites for high pressure pipeline repairs, in-air and subsea: an overview." Ueda, Tamon (ed.) 3rd Asia-Pacific Conference on FRP in Structures (APFIS 2012). Sapporo, Japan 02 - 04 Feb 2012 Hokkaido, Japan.
Adhesive wear characteristics of natural fiber-reinforced composites
Yousif, Belal F.. 2012. "Adhesive wear characteristics of natural fiber-reinforced composites." Davim, J. Paulo (ed.) Wear of advanced materials. London, United Kingdom. John Wiley & Sons. pp. 61-97
Processing of materials using electromagnetic fields
Ku, Harry S.. 2012. "Processing of materials using electromagnetic fields." Nicolais, Luigi and Borzacchiello, Assunta (ed.) Wiley encyclopedia of composites, 2nd ed.. Hoboken, NJ. United States. John Wiley & Sons. pp. 2487-2500
The potential of using date palm fibres as reinforcement for polymeric composites
Alsaeed, T., Yousif, B. F. and Ku, H.. 2013. "The potential of using date palm fibres as reinforcement for polymeric composites." Materials and Design. 43, pp. 177-184. https://doi.org/10.1016/j.matdes.2012.06.061
Non-velocity based analysis of passive ultrasonic signal for source location detection in composite plates: a pilot study
Hafizi, Z. M., Epaarachchi, J., Nizwan, C. K. E. and Lau, K. T.. 2012. "Non-velocity based analysis of passive ultrasonic signal for source location detection in composite plates: a pilot study." 1st International Conference of Mechanical Engineering Research (ICMER 2011). Kuantan, Malaysia 05 - 07 Dec 2011 Bristol, United Kingdom . https://doi.org/10.1088/1757-899X/36/1/012008
Modal acoustic emission investigation for progressive failure monitoring in thin composite plates under tensile test
Hafizi, Mohd Zohari, Epaarachchi, Jayantha Ananda and Lau, K. T.. 2013. "Modal acoustic emission investigation for progressive failure monitoring in thin composite plates under tensile test." Key Engineering Materials. 558 (558), pp. 65-75. https://doi.org/10.4028/www.scientific.net/KEM.558.65
Optimized FBG sensor network for efficient detection of a delamination in FRP structures
Kahandawa, G. C., Epaarachchi, J. A., Wang, H. and Lau, K. T.. 2012. "Optimized FBG sensor network for efficient detection of a delamination in FRP structures." Jaafar, M., Azura, A. R., Leong, K. H. and Leong, A. Y. L. (ed.) 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today. Kuala Lumpur, Malaysia 06 - 08 Nov 2012 Kowloon, Hong Kong.
Detecting delamination in a composite structure using an embedded FBG-AE hybrid system
Kahandawa, G. C., Hafizi, Z. M., Epaarachchi, J. and Lau, K. T.. 2012. "Detecting delamination in a composite structure using an embedded FBG-AE hybrid system." Kotousov, Andrei (ed.) 7th Australasian Congress on Applied Mechanics (ACAM 2012). Adelaide, Australia 09 - 12 Dec 2012 Canberra, Australia.
Modelling of tensile properties glass powder/epoxy composites post-cured in an oven and in microwaves
Ku, H., Epaarachchi, J., Trada, M. and Wong, P.. 2013. "Modelling of tensile properties glass powder/epoxy composites post-cured in an oven and in microwaves ." Journal of Reinforced Plastics and Composites. 32 (10), pp. 689-699. https://doi.org/10.1177/0731684412475333
Dielectric properties of sawdust reinforced epoxy composites post-cured in microwaves
Ku, H., Trada, M. and Tai, P.. 2013. "Dielectric properties of sawdust reinforced epoxy composites post-cured in microwaves ." Journal of Reinforced Plastics and Composites. 32 (10), pp. 765-774. https://doi.org/10.1177/0731684412475250
Fabrication process optimization of hemp fibre reinforced polypropylene composites
Yan, Z. L., Wang, H., Lau, K. T., Zhang, J. C., Zhang, H. and Ding, Y.. 2012. "Fabrication process optimization of hemp fibre reinforced polypropylene composites." Jaafar, M., Azura, A. R., Leong, K. H. and Leong, A. Y L. (ed.) 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today. Kuala Lumpur, Malaysia 06 - 08 Nov 2012 Kowloon, Hong Kong.
Tensile properties of bagasse reinforced epoxy composites
Trada, M., Mandava, J., Ku, H. and Yousif, B.. 2012. "Tensile properties of bagasse reinforced epoxy composites." Jaafar, M., Azura, A. R., Leong, K. H. and Leong, A. Y. L. (ed.) 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today. Kuala Lumpur, Malaysia 06 - 08 Nov 2012 Kowloon, Hong Kong.
Mechanical properties of a bamboo charcoal reinforced polylactic acid composite
Ho, M. P., Wang, H., Lau, K. T., Jayaraman, K. and Bhattacharyya, D.. 2012. "Mechanical properties of a bamboo charcoal reinforced polylactic acid composite." Jaafar, M., Azura, A. R., Leong, K. H. and Leong, A. Y. (ed.) 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today. Kuala Lumpur, Malaysia 06 - 08 Nov 2012 Kowloon, Hong Kong.
An investigation of effective detection length of a localized micro-failure in a laminated thin composite plate using FBG sensor integrated AE system
Hafizi, Z. M., Epaarachchi, J. and Lau, K. T.. 2012. "An investigation of effective detection length of a localized micro-failure in a laminated thin composite plate using FBG sensor integrated AE system." Jaafar, M., Azura, A. R., Leong, K. H. and Leong, A. Y. L. (ed.) 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today. Kuala Lumpur, Malaysia 06 - 08 Nov 2012 Kowloon, Hong Kong.
Implementing multimedia resources in online learning and its effect on student understanding
Yousif, B. F., Basson, Marita and Hobohm, Carola. 2012. "Implementing multimedia resources in online learning and its effect on student understanding." Mann, Llewellyn and Daniel, Scott (ed.) 23rd Annual Conference of the Australasian Association for Engineering Education (AAEE 2012). Melbourne, Australia 03 - 05 Dec 2012 Melbourne, Australia.
A pilot study on flexural properties of epoxy nanoclay reinforced composites
Ku, H., Fung, S. Y., Islam, M., Li, X. and Chong, Y. P.. 2013. "A pilot study on flexural properties of epoxy nanoclay reinforced composites ." Journal of Reinforced Plastics and Composites. 32 (2), pp. 96-104. https://doi.org/10.1177/0731684412459246
Development of smart wind turbine blades
Supeni, E. E., Epaarachchi, J. A., Islam, M. M. and Lau, K. T.. 2012. "Development of smart wind turbine blades." Jaafar, M., Azura, A. R., Leong, K. H and Leong, A. Y. L (ed.) 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today. Kuala Lumpur, Malaysia 06 - 08 Nov 2012 Kowloon, Hong Kong.
Thermal properties and structure conformation on silkworm silk fibre
Ho, Mei-po, Wang, Hao and Lau, Kin-tak. 2012. "Thermal properties and structure conformation on silkworm silk fibre." Heslehurst, Rikard Benton and Byrne, Ann (ed.) Composites Australia and the CRC for Advanced Composite Structures Conference 2012: Diversity in Composites. Leura, Australia 15 - 16 Mar 2012 Melbourne, Australia.
Compressive properties of chemically-treated hemp fibre reinforced composites
Kabir, Mohammad Mazedul, Wang, Hao, Lau, Alan, Cardona, Francisco and Aravinthan, Thiru. 2012. "Compressive properties of chemically-treated hemp fibre reinforced composites." Heslehurst, Rikard Benton and Byrne, Ann (ed.) Composites Australia and the CRC for Advanced Composite Structures Conference 2012: Diversity in Composites. Leura, Australia 15 - 16 Mar 2012 Melbourne, Australia.
Develop and validate a biomechanical surrogate of the human thorax using corrugated sheets: a feasibility study
Thota, Narasimha Murthy, Eepaarachchi, Jayantha A. and Lau, K. T.. 2012. "Develop and validate a biomechanical surrogate of the human thorax using corrugated sheets: a feasibility study." 7th Australasian Congress on Applied Mechanics (ACAM 2012). Adelaide, Australia 09 - 12 Dec 2012 Canberra, Australia.
Tribological consideration in roller mill machines for agriculture applications
Al-Sandooq, J. M., Yousif, B. F. and Jensen, T. A.. 2012. "Tribological consideration in roller mill machines for agriculture applications." Surface Review and Letters. 19 (6), pp. 1250065-1. https://doi.org/10.1142/S0218625X12500655
Characteristics of kenaf fibre immersed in different solutions
Yousif, B. F., Orupabo, C. and Azwa, Z. N.. 2012. "Characteristics of kenaf fibre immersed in different solutions." Journal of Natural Fibers. 9 (4), pp. 207-218. https://doi.org/10.1080/15440478.2012.733149
Review on using packages to enhance the teaching of critical path networks
Ku, Harry S.. 2012. "Review on using packages to enhance the teaching of critical path networks." Ao, S. I., Castillo, Oscar, Douglas, Craig, Feng, David Dagan and Lee, Jeong-A. (ed.) 2012 International MultiConference of Engineers and Computer Scientists (IMECS 2012). Hong Kong, China 14 - 16 Mar 2012 Hong Kong.
Epoxy composite based on kenaf fibers for tribological applications under wet contact conditions
Yousif, B. F. and Chin, C. W.. 2012. "Epoxy composite based on kenaf fibers for tribological applications under wet contact conditions." Surface Review and Letters. 19 (5), pp. 1250050-1. https://doi.org/10.1142/S0218625X12500503
Measurements of heat treatment effects on bovine cortical bones by nanoindentation and compression testing
Lau, Mei-Ling, Lau, Kin-Tak, Ku, Harry, Bahattacharyya, Debes and Yao, Yan-Dong. 2012. "Measurements of heat treatment effects on bovine cortical bones by nanoindentation and compression testing." Journal of Biomaterials and Nanobiotechnology. 3 (1), pp. 105-113. https://doi.org/10.4236/jbnb.2012.31014
Suitability of using coir fiber/polymeric composite for the design of liquid storage tanks
Yousif, B. F. and Ku, H.. 2012. "Suitability of using coir fiber/polymeric composite for the design of liquid storage tanks." Materials and Design. 36, pp. 847-853. https://doi.org/10.1016/j.matdes.2011.01.063
The synergistic effect of hybrid flame retardants on pyrolysis behaviour of hybrid composite materials
Albdiry, M. T., Almosawi, A. I. and Yousif, B. F.. 2012. "The synergistic effect of hybrid flame retardants on pyrolysis behaviour of hybrid composite materials." Journal of Engineering Science and Technology. 7 (3), pp. 351-359.
Design of smart structures for wind turbine blades
Supeni, E. E., Epaarachchi, J. A., Islam, M. M. and Lau, K. T.. 2012. "Design of smart structures for wind turbine blades." Noor, M. M., Rahman, M. M. and Ismail, J. (ed.) 2nd Malaysian Postgraduate Conference (MPC 2012). Gold Coast, Australia 07 - 09 Jul 2012 Sydney, Australia.
Tribo performance of T-BFRP composite subjected to dry/wet contact conditions
Nirmal, Umar, Hashim, Jamil, Rilling, Dirk, Brevern, P. V. and Yousif, B. F.. 2012. "Tribo performance of T-BFRP composite subjected to dry/wet contact conditions." Francis, Elizabeth (ed.) Natural polymers, biopolymers, biomaterials, and their composites, blends, and IPNs. Toronto, Canada. Apple Academic Press (CRC Press). pp. 311-325
Flexural properties of treated and untreated kenaf/epoxy composites
Yousif, B. F., Shalwan, A., Chin, C. W. and Ming, K. C.. 2012. "Flexural properties of treated and untreated kenaf/epoxy composites." Materials and Design. 40, pp. 378-385. https://doi.org/10.1016/j.matdes.2012.04.017
A study on the dynamic mechanical properties of silk fibre composites
Ho, Mei-po, Wang, Hao, Ho, Chun-kit and Lau, Kin-tak. 2012. "A study on the dynamic mechanical properties of silk fibre composites." Advanced Materials Research. 410, pp. 106-109. https://doi.org/10.4028/www.scientific.net/AMR.410.106
Modeling the flexural properties of SLG reinforced phenol formaldehyde composites using Langrage’s Method
Ku, H., Zhou, Hong, Wong, Peter, Su, Gang and Vadher, Jayent. 2012. "Modeling the flexural properties of SLG reinforced phenol formaldehyde composites using Langrage’s Method ." Advanced Materials Research. 410, pp. 305-308. https://doi.org/10.4028/www.scientific.net/AMR.410.305
Flexural properties of epoxy composites filled with glass powder: preliminary results
Ku, H., Wong, P., Huang, J., Fung, H. and Trada, M.. 2012. "Flexural properties of epoxy composites filled with glass powder: preliminary results." Advanced Materials Research. 410, pp. 309-312. https://doi.org/10.4028/www.scientific.net/AMR.410.309
Duct noise control by using very light composite plate
Choy, Y. S., Liu, Y. and Lau, K. T.. 2012. "Duct noise control by using very light composite plate." Advanced Materials Research. 410, pp. 361-365. https://doi.org/10.4028/www.scientific.net/AMR.410.361
Design of newly fabricated tribological machine for wear and frictional experiments under dry/wet condition
Yousif, B. F.. 2013. "Design of newly fabricated tribological machine for wear and frictional experiments under dry/wet condition." Materials and Design. 48, pp. 2-13. https://doi.org/10.1016/j.matdes.2012.06.046
Effect of degumming time on silkworm silk fibre for biodegradable polymer composites
Ho, Mei-po, Wang, Hao and Lau, Kin-tak. 2012. "Effect of degumming time on silkworm silk fibre for biodegradable polymer composites." Applied Surface Science. 258 (8), pp. 3948-3955. https://doi.org/10.1016/j.apsusc.2011.12.068
Tensile properties of phenol-formaldehyde nanoclay reinforced composites: a pilot study
Ku, H., Yap, Y. S., Lee, T. S. and Trada, M.. 2012. "Tensile properties of phenol-formaldehyde nanoclay reinforced composites: a pilot study ." Journal of Applied Polymer Science. 126 (2 (Supplement)), pp. E142-E150. https://doi.org/10.1002/app.35232
Chemical treatments on plant-based natural fibre reinforced polymer composites: an overview
Kabir, M. M., Wang, H., Lau, K. T. and Cardona, F.. 2012. "Chemical treatments on plant-based natural fibre reinforced polymer composites: an overview ." Composites Part B: Engineering. 43 (7), pp. 2883-2892. https://doi.org/10.1016/j.compositesb.2012.04.053
Interfacial bonding and degumming effects on silk fibre/polymer biocomposites
Ho, Mei-po, Wang, Hao, Lau, Kin-tak, Lee, Joong-hee and Hui, David. 2012. "Interfacial bonding and degumming effects on silk fibre/polymer biocomposites ." Composites Part B: Engineering. 43 (7), pp. 2801-2812. https://doi.org/10.1016/j.compositesb.2012.04.042
Betelnut fibres as an alternative to glass fibres to reinforce thermoset composites: a comparative study
Nirmal, Umar, Hashim, Jamil, Lau, Saijod T. W., Yuhazri, M. Y. and Yousif, B. F.. 2012. "Betelnut fibres as an alternative to glass fibres to reinforce thermoset composites: a comparative study." Textile Research Journal. 82 (11), pp. 1107-1120. https://doi.org/10.1177/0040517512439945
Morphological structures and tribological performance of unsaturated polyester based untreated/silane-treated halloysite nanotubes
Albdiry, M. T. and Yousif, B. F.. 2013. "Morphological structures and tribological performance of unsaturated polyester based untreated/silane-treated halloysite nanotubes." Materials and Design. 48, pp. 68-76. https://doi.org/10.1016/j.matdes.2012.08.035
Tribological behaviour of graphite/date palm fibres reinforced epoxy composites
Al-Ajmi, Abdullah. 2013. Tribological behaviour of graphite/date palm fibres reinforced epoxy composites. PhD Thesis Doctor of Philosophy. University of Southern Queensland.
Design of an impact resistant glass fibre/epoxy composites using short silk fibres
Ho, Mei-po and Lau, Kin-tak. 2012. "Design of an impact resistant glass fibre/epoxy composites using short silk fibres." Materials and Design. 35 (1), pp. 664-669. https://doi.org/10.1016/j.matdes.2011.10.003
Modal analysis of high frequency acoustic signal approach for progressive failure monitoring in thin composite plates
Hafizi, Z. M., Epaarachchi, J. and Lau, K. T.. 2012. "Modal analysis of high frequency acoustic signal approach for progressive failure monitoring in thin composite plates." 2nd Malaysian Postgraduate Conference (MPC 2012). Gold Coast, Australia 07 - 09 Jul 2012 Sydney, Australia.
A critical review on the manufacturing processes in relation to the properties of nanoclay/polymer composites
Albdiry, M. T., Yousif, B. F., Ku, H. and Lau, K. T.. 2013. "A critical review on the manufacturing processes in relation to the properties of nanoclay/polymer composites." Journal of Composite Materials. 47 (9), pp. 1093-1115. https://doi.org/10.1177/0021998312445592
Reinforcement of polypropylene with hemp fibres
Yan, Z. L., Wang, H., Lau, K. T., Pather, S., Zhang, J. C., Lin, G. and Ding, Y.. 2013. "Reinforcement of polypropylene with hemp fibres." Composites Part B: Engineering. 46, pp. 221-226. https://doi.org/10.1016/j.compositesb.2012.09.027
A potential material for tissue engineering: silkworm silk/PLA biocomposite
Cheung, Hoi-Yan, Lau, Kin-tak, Tao, Xiao-Ming and Hui, David. 2008. "A potential material for tissue engineering: silkworm silk/PLA biocomposite ." Composites Part B: Engineering. 39 (6), pp. 1026-1033. https://doi.org/10.1016/j.compositesb.2007.11.009
Fracture toughness of vinyl ester composites reinforced with sawdust and postcured in microwaves
Ku, H., Prajapati, M. and Trada, M.. 2012. "Fracture toughness of vinyl ester composites reinforced with sawdust and postcured in microwaves." International Journal of Microwave Science and Technology. 2012, pp. 1-8. https://doi.org/10.1155/2012/152726
Sonication effect on the mechanical properties of MWCNTs reinforced natural rubber
Tarawneh, Mou’ad A., Ahmad, Sahrim Hj., EhNoum, SeYong and Lau, Kin-tak. 2013. "Sonication effect on the mechanical properties of MWCNTs reinforced natural rubber." Journal of Composite Materials. 47 (5), pp. 579-585. https://doi.org/10.1177/0021998312443394
Critical factors on manufacturing processes of natural fibre composites
Ho, Mei-po, Wang, Hao, Lee, Joong-Hee, Ho, Chun-kit, Lau, Kin-tak, Leng, Jinsong and Hui, David. 2012. "Critical factors on manufacturing processes of natural fibre composites." Composites Part B: Engineering. 43 (8), pp. 3549-3562. https://doi.org/10.1016/j.compositesb.2011.10.001
Micro-crack behavior of carbon fiber reinforced thermoplastic modified epoxy composites for cryogenic applications
He, Yu-xin, Li, Qi, Kuila, Tapas, Kim, Nam Hoon, Jiang, Tongwu, Lau, Kin-tak and Lee, Joong Hee. 2013. "Micro-crack behavior of carbon fiber reinforced thermoplastic modified epoxy composites for cryogenic applications." Composites Part B: Engineering. 44 (1), pp. 533-539. https://doi.org/10.1016/j.compositesb.2012.03.014
Effect of silk fiber to the mechanical and thermal properties of its biodegradable composites
Ho, Mei-Po, Wang, Hao, Lau, Kin-Tak and Leng, Jinsong. 2013. "Effect of silk fiber to the mechanical and thermal properties of its biodegradable composites ." Journal of Applied Polymer Science. 127 (4), pp. 2389-2396. https://doi.org/10.1002/app.37539
Courses for teaching leadership capacity in professional engineering degrees in Australia and Europe
Khattak, Hamid, Ku, Harry and Goh, Steven. 2012. "Courses for teaching leadership capacity in professional engineering degrees in Australia and Europe." European Journal of Engineering Education. 37 (3), pp. 279-296. https://doi.org/10.1080/03043797.2012.684671
Thermal properties of calcium carbonate powder reinforced vinyl ester composites: pilot study
Ku, Harry, Cardona, Francisco and Jamal Eddine, Mustapha. 2013. "Thermal properties of calcium carbonate powder reinforced vinyl ester composites: pilot study." Journal of Applied Polymer Science. 127 (4), pp. 2996-3001. https://doi.org/10.1002/app.37973
Flexural properties of sawdust-reinforced epoxy composites post-cured in microwaves
Ku, H., Donald, M., Cardona, F. and Trada, M.. 2012. "Flexural properties of sawdust-reinforced epoxy composites post-cured in microwaves." Journal of Composite Materials. 46 (22), pp. 2879-2890. https://doi.org/10.1177/0021998311433437
Mechanical properties of chemically-treated hemp fibre reinforced sandwich composites
Kabir, M. M., Wang, H., Lau, K. T., Cardona, F. and Aravinthan, T.. 2012. "Mechanical properties of chemically-treated hemp fibre reinforced sandwich composites." Composites Part B: Engineering. 43 (2), pp. 159-169. https://doi.org/10.1016/j.compositesb.2011.06.003
Use of FBG sensors for SHM in aerospace structures
Kahandawa, Gayan C., Epaarachchi, Jayantha, Wang, Hao and Lau, K. T.. 2012. "Use of FBG sensors for SHM in aerospace structures." Photonic Sensors. 2 (3), pp. 203-214. https://doi.org/10.1007/s13320-012-0065-4
Development of composite plate for compact silencer design
Choy, Y. S., Liu, Y., Cheung, H. Y., Xi, Q. and Lau, K. T.. 2012. "Development of composite plate for compact silencer design ." Journal of Sound and Vibration. 331 (10), pp. 2348-2364. https://doi.org/10.1016/j.jsv.2011.12.023
Contrast on tensile and flexural properties of glass powder reinforced epoxy composites: pilot study
Ku, H. and Wong, P.. 2012. "Contrast on tensile and flexural properties of glass powder reinforced epoxy composites: pilot study ." Journal of Applied Polymer Science. 123 (1), pp. 152-161. https://doi.org/10.1002/app.34469
The effect of fibre chemical treatments on hemp reinforced composites
Wang, H., Kabir, M. M. and Lau, K. T.. 2011. "The effect of fibre chemical treatments on hemp reinforced composites ." 18th International Conference on Composite Materials (ICCM-18). Jeju, Korea 21 - 26 Aug 2011 Seoul, Korea.
Introduction to multifunctional polymer nanocomposites
Leng, Jinsong, Li, Jianjun and Lau, Alan kin-tak. 2011. "Introduction to multifunctional polymer nanocomposites." Leng, Jinsong and Lau, Alan kin-tak (ed.) Multifunctional polymer nanocomposites. Boca Raton, FL. United States. CRC Press. pp. 1-18
On integration of mirror collector and Stirling engine for solar power system
Yousif, B. F., Al-Shalabi, Ammar and Rilling, Dirk G.. 2011. "On integration of mirror collector and Stirling engine for solar power system." Gökçekuş, Hüseyin, Umut, Türker and LaMoreaux, James W. (ed.) 2007 International Conference on Environment: Survival and Sustainability (ESS 2007). Nicosia, Northern Cyprus 19 - 24 Feb 2007 Germany. https://doi.org/10.1007/978-3-540-95991-5_47
Crude palm oil fuel for diesel-engines: experimental and ANN simulation approaches
Yusaf, T. F., Yousif, B. F. and Elawad, M. M.. 2011. "Crude palm oil fuel for diesel-engines: experimental and ANN simulation approaches." Energy. 36 (8), pp. 4871-4878. https://doi.org/10.1016/j.energy.2011.05.032
Wear and frictional performance of polymeric composites aged in various solutions
Yousif, B. F. and Nirmal, Umar. 2011. "Wear and frictional performance of polymeric composites aged in various solutions." Wear. 272 (1), pp. 97-104. https://doi.org/10.1016/j.wear.2011.07.006
Using computer software packages to enhance the teaching of engineering management science: part 1 - critical path networks
Ku, H., Fulcher, R. and Xiang, W.. 2011. "Using computer software packages to enhance the teaching of engineering management science: part 1 - critical path networks." Computer Applications in Engineering Education. 19 (1), pp. 26-39. https://doi.org/10.1002/cae.20286
A pilot study on the relationship between mechanical and electrical loss tangents of glass powder reinforced epoxy composites post-cured in microwaves
Ku, H., Wong, P., Maxwell, A., Huang, J., Fung, H. and Mohan, T.. 2011. "A pilot study on the relationship between mechanical and electrical loss tangents of glass powder reinforced epoxy composites post-cured in microwaves." Zhu, Zeng (ed.) ICKEM 2011: 1st International Conference on Key Engineering Materials. Sanya, China 25 - 27 Mar 2011 Zurich, Switzerland. https://doi.org/10.4028/www.scientific.net/AMR.214.26
Flexible engineering degree programs with remote access laboratories in an Australian regional university known for its excellence in e-learning
Ku, H., Goh, S. and Ahfock, A.. 2011. "Flexible engineering degree programs with remote access laboratories in an Australian regional university known for its excellence in e-learning." Computer Applications in Engineering Education. 19 (1), pp. 18-25. https://doi.org/10.1002/cae.20284
Adhesive wear of thermoplastic composite based on kenaf fibres
Singh, N., Yousif, B. F. and Rilling, D.. 2011. "Adhesive wear of thermoplastic composite based on kenaf fibres." Proceedings of the Institution of Mechanical Engineers Part J: Journal of Engineering Tribology. 225 (2), pp. 101-109. https://doi.org/10.1177/2041305X10394053
Mechanical properties of an injected silk fibre reinforced PLA composite
Ho, Mei-Po, Lau, Kin-tak, Wang, Hao and Bhattacharyya, Debes. 2011. "Mechanical properties of an injected silk fibre reinforced PLA composite." Bhattacharyya, D., Lin, R. J. T. and Srivatsan, T. S. (ed.) 19th International Symposium on Processing and Fabrication of Advanced Materials (PFAM XIX). Auckland, New Zealand 14 - 17 Jan 2011 Auckland, New Zealand.
Recent research trend in natural-fibre composites
Lau, Alan K. T. and Ho, Mabel M. P.. 2011. "Recent research trend in natural-fibre composites." JEC Composites Magazine.
Electrochemical performance of a graphene polypyrrole nanocomposite as a supercapacitor electrode
Bose, Saswata, Kim, Nam Hoon, Kuila, Tapas, Lau, Kin-tak and Lee, Joong Hee. 2011. "Electrochemical performance of a graphene polypyrrole nanocomposite as a supercapacitor electrode ." Nanotechnology. 22 (29), p. 5202. https://doi.org/10.1088/0957-4484/22/29/295202
Assessing heat-treatment effects on bovine cortical bones by nanoindentation
Lau, Mei-ling, Lau, Kin-tak, Ku, Harry, Bahattacharyya, Debes and Lee, Joong-Hee. 2012. "Assessing heat-treatment effects on bovine cortical bones by nanoindentation ." Advanced Materials Research. https://doi.org/10.4028/www.scientific.net/AMR.410.110
Tribological characteristics of sustainable fibre reinforced thermoplastic composites under wet adhesive wear
Singh, Narish, Yousif, B. F. and Rilling, Dirk. 2011. "Tribological characteristics of sustainable fibre reinforced thermoplastic composites under wet adhesive wear." Tribology Transactions. 54 (5), pp. 736-748. https://doi.org/10.1080/10402004.2011.597544
Electromechanical stability of compressible dielectric elastomer actuators
Liu, Liwi, Liu, Yanju, Leng, Jinsong and Lau, Kin-tak. 2011. "Electromechanical stability of compressible dielectric elastomer actuators ." Smart Materials and Structures. 20 (11), p. 115015. https://doi.org/10.1088/0964-1726/20/11/115015
Relationship between different mechanical properties of phenol formaldehyde SLG-reinforced composites
Ku, H. S.. 2011. "Relationship between different mechanical properties of phenol formaldehyde SLG-reinforced composites." Journal of Reinforced Plastics and Composites. 30 (15), pp. 1281-1292. https://doi.org/10.1177/0731684411418705
Novel phenolic resins with improved mechanical and toughness properties
Cardona, Francisco, Lau, Alan Kin-Tak and Fedrigo, Jessica. 2012. "Novel phenolic resins with improved mechanical and toughness properties." Journal of Applied Polymer Science. 123 (4), pp. 2131-2139. https://doi.org/10.1002/app.34719
Relationship between electrical and mechanical loss tangents of hollow glass powder reinforced epoxy composites: a pilot study
Ku, H., Maxwell, A., Wong, P., Huang, J. and Fung, H.. 2011. "Relationship between electrical and mechanical loss tangents of hollow glass powder reinforced epoxy composites: a pilot study ." Journal of Applied Polymer Science. 119 (5), pp. 2945-2952. https://doi.org/10.1002/app.33009
Property enhancement of a carbon fiber/epoxy composite by using carbon nanotubes
Kim, M. T., Rhee, K. Y., Lee, J. H., Hui, D. and Lau, Alan K. T.. 2011. "Property enhancement of a carbon fiber/epoxy composite by using carbon nanotubes ." Composites Part B: Engineering. 42 (5), pp. 1257-1261. https://doi.org/10.1016/j.compositesb.2011.02.005
Investigations on wear and frictional properties of kenaf fibre polyurethane composites under dry and wet contact conditions
Singh, Narish, Yousif, B. F. and Rilling, Dirk. 2011. "Investigations on wear and frictional properties of kenaf fibre polyurethane composites under dry and wet contact conditions." International Journal of Precision Technology. 2 (4), pp. 375-387. https://doi.org/10.1504/IJPTECH.2011.044904
Correlation of mechanical performance and morphological structures of epoxy micro/nanoparticulate composites
Dong, Yu, Chaudhary, Deeptangshu, Ploumis, Charlie and Lau, Kin-tak. 2011. "Correlation of mechanical performance and morphological structures of epoxy micro/nanoparticulate composites ." Composites Part A: Applied Science and Manufacturing. 42 (10), pp. 1483-1492. https://doi.org/10.1016/j.compositesa.2011.06.015
Mechanism of reinforcement in a nanoclay/polymer composite
Chan, Mo-lin, Lau, Kin-tak, Wong, Tsun-tat, Ho, Mei-po and Hui, David. 2011. "Mechanism of reinforcement in a nanoclay/polymer composite ." Composites Part B: Engineering. 42 (6), pp. 1708-1712. https://doi.org/10.1016/j.compositesb.2011.03.011
An experimental investigation of early damage localization for thin glass fibre reinforced symmetric composite laminates
Hafizi, Z. M., Epaarachchi, J. and Lau, K. T.. 2012. "An experimental investigation of early damage localization for thin glass fibre reinforced symmetric composite laminates." Heslehurst, Rikard Benton and Byrne, Ann (ed.) Composites Australia and the CRC for Advanced Composite Structures Conference 2012: Diversity in Composites. Leura, Australia 15 - 16 Mar 2012 Melbourne, Australia.
ANN for tribological applications
Nasir, Touqeer, Salih, Nbhan D., Hui, Liew T., Wen, Chin Chee and Yousif, B. F.. 2010. "ANN for tribological applications." Ghia, Urmila (ed.) 2009 ASME International Mechanical Engineering Congress and Exposition (IMECE 2009). Florida, United States of America 13 - 19 Nov 2009 United States. https://doi.org/10.1115/IMECE2009-10161
Wet adhesive wear characteristics of untreated oil palm fibre-reinforced polyester and treated oil palm fibre-reinforced polyester composites using the pin-on-disc and block-on-ring techniques
Yousif, B. F. and El-Tayeb, N. S. M.. 2010. "Wet adhesive wear characteristics of untreated oil palm fibre-reinforced polyester and treated oil palm fibre-reinforced polyester composites using the pin-on-disc and block-on-ring techniques." Proceedings of the Institution of Mechanical Engineers Part J: Journal of Engineering Tribology. 224 (2), pp. 123-131. https://doi.org/10.1243/13506501JET655
An investigation into the application of research strategies in the final-year undergraduate engineering and surveying projects
Cochrane, Sandra, Goh, Steven and Ku, Harry. 2009. "An investigation into the application of research strategies in the final-year undergraduate engineering and surveying projects." Kestell, Colin, Grainger, Steven and Cheung, John (ed.) 20th Annual Conference for the Australasian Association of Engineering Education (AAEE 2009). Adelaide, Australia 06 - 09 Dec 2009 Adelaide, Australia.
Engineering education - undergraduate and masters: China and down under
Ku, Harry, Wen, Paul, Xiang, Wei and Goh, Steven. 2009. "Engineering education - undergraduate and masters: China and down under." Kestell, Colin, Grainger, Steven and Cheung, John (ed.) 20th Annual Conference for the Australasian Association of Engineering Education (AAEE 2009). Adelaide, Australia 06 - 09 Dec 2009 Adelaide, Australia.
Research design for investigation of Nigeria manufacturing management
Mustapha, U. M., Ku, H. and Goh, S.. 2009. "Research design for investigation of Nigeria manufacturing management." Wen, Peng, Li, Yuefeng, Polkowski, Lech, Yao, Yiyu, Tsumoto, Shusaku and Wang, Guoyin (ed.) 4th International Conference on Rough Sets and Knowledge Technology (RSKT 2009). Gold Coast, Australia 14 - 16 Jul 2009 Berlin, Germany. Springer. https://doi.org/10.1007/978-3-642-02962-2_58
Effects of chopped hemp on mechanical and thermal properties of epoxy resins
Vandenbroucke, A., Cardona, F., Ku, H. and Rogers, D.. 2009. "Effects of chopped hemp on mechanical and thermal properties of epoxy resins ." Aravinthan, Thiru, Karunasena, Warna (Karu) and Wang, Hao (ed.) 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM20). Toowoomba, Australia 02 - 05 Dec 2008 London, United Kingdom.
Effects of EPON on mechanical and thermal properties of epoxy resins
Ku, H., Cardona, F., Rogers, D. and Vandenbroucke, A.. 2008. "Effects of EPON on mechanical and thermal properties of epoxy resins ." Lau, Alan K. T., Lu, J., Varadan, Vijay K., Chang, F. K., Tu, J. P. and Lam, P. M. (ed.) ICMMSE 2008: International Conference on Multifunctional Materials and Structures. Hong Kong, China 28 - 31 Jul 2008 Stafa-Zurich, Switzerland. https://doi.org/10.4028/www.scientific.net/AMR.47-50.536
Weldability and heat affected zone (HAZ) evaluation for high energy rate joining of thermoplastic composites using microwaves
Ku, Harry S., Siores, Elias and Ball, James A. R.. 1997. "Weldability and heat affected zone (HAZ) evaluation for high energy rate joining of thermoplastic composites using microwaves ." Herszberg, Isreal (ed.) 11th International Conference on Composite Materials (ICCM-11). Gold Coast, Australia 14 - 18 Jul 1997 Cambridge, United Kingdom.
Complex permittivity of low loss thermoplastic composites using a resonant cavity method
Ku, Harry S., Ball, James A. R., Siores, Elias and Chan, Peter. 1999. "Complex permittivity of low loss thermoplastic composites using a resonant cavity method ." Massard, Thierry and Vautrin, Alain (ed.) 12th International Conference on Composite Materials (ICCM-12). Paris, France 05 - 09 Jul 1999 Cambridge, United Kingdom.
Prediction of crushing stress in composite materials
Goh, S., Ku, H. and Ang, S. L.. 2008. "Prediction of crushing stress in composite materials." Journal of Composite Materials. 42 (5), pp. 467-484. https://doi.org/10.1177/0021998307086204
Micrographs of fractured vinyl ester composites
Ku, Harry S., Ang, Soh Fong, Snook, Chris and Baddeley, Douglas. 2007. "Micrographs of fractured vinyl ester composites." Journal of Reinforced Plastics and Composites. 26 (11), pp. 1111-1134. https://doi.org/10.1177/0731684407079778
Processing of polymer matrix composites using variable frequency microwave (VFM)
Ku, Harry S., Siores, Elias, Ball, James A. R. and Chan, Peter. 2001. "Processing of polymer matrix composites using variable frequency microwave (VFM) ." Zhang, Yao (ed.) 13th International Conference on Composite Materials (ICCM-13) . Beijing, China 25 - 29 Jun 2001 China.
Variable frequency microwave (VFM) processing facilities and application in processing thermoplastic matrix composites
Ku, H. S., Siu, F., Siores, E. and Ball, J. A. R.. 2003. "Variable frequency microwave (VFM) processing facilities and application in processing thermoplastic matrix composites." Journal of Materials Processing Technology. 139 (1-3), pp. 291-295. https://doi.org/10.1016/S0924-0136(03)00238-3
Impact strength of vinyl ester composites cured by microwave irradiation: preliminary results
Cheng, Y. M., Ku, Harry S., Snook, Chris and Baddeley, Douglas. 2004. "Impact strength of vinyl ester composites cured by microwave irradiation: preliminary results." Proceedings of the Institution of Mechanical Engineers Part L: Journal of Materials, Design and Applications. https://doi.org/10.1177/146442070421800405
Short bar tests for vinyl ester particulate reinforced composites cured by microwaves
Ku, Harry S., Tsang, Shing Hin, Baddeley, Douglas and Snook, Chris. 2006. "Short bar tests for vinyl ester particulate reinforced composites cured by microwaves." Australian Journal of Structural Engineering. 7 (1), pp. 65-73.
Fracture toughness of vinyl ester composites cured by microwave irradiation: preliminary results
Ku, Harry S., Baddeley, Douglas, Snook, Chris and Chew, C. S.. 2005. "Fracture toughness of vinyl ester composites cured by microwave irradiation: preliminary results." Journal of Reinforced Plastics and Composites. 24 (11), pp. 1181-1202. https://doi.org/10.1177/0731684405048841
Micrographs of the fracture of vinyl ester composites cured by microwaves: pilot study
Chew, C. S., Ku, Harry S., Baddeley, Douglas and Snook, Chris. 2005. "Micrographs of the fracture of vinyl ester composites cured by microwaves: pilot study." Journal of Electromagnetic Waves and Applications. 19 (1), pp. 67-82. https://doi.org/10.1163/1569393052955080
Drop weight impact test fracture of vinyl ester composites: micrographs of pilot study
Ku, Harry S., Cheng, Y. M., Snook, Chris and Baddeley, Douglas. 2005. "Drop weight impact test fracture of vinyl ester composites: micrographs of pilot study." Journal of Composite Materials. 39 (18), pp. 1607-1620. https://doi.org/10.1177/0021998305051111
Fruit drying process: analysis, modeling and simulation
Abdulla, Shahab, Wen, Paul, Landers, Richard and Yousif, B. F.. 2011. "Fruit drying process: analysis, modeling and simulation." Scientific Research and Essays. 6 (23), pp. 4915-4924.
Carbon nanotubes for space and bio-engineering applications
Lau, Kin-Tak, Cheung, Hoi-Yan, Lu, Jian Ping, Yin, Yan-Sheng, Hui, David and Li, Hu-Lin. 2008. "Carbon nanotubes for space and bio-engineering applications ." Journal of Computational and Theoretical Nanoscience. 5 (1), pp. 23-35. https://doi.org/10.1166/jctn.2008.003
Flexural properties of phenolic resin reinforced with glass powder: preliminary results
Ku, H., Trada, M., Nixon, R. and Wong, P.. 2010. "Flexural properties of phenolic resin reinforced with glass powder: preliminary results ." Journal of Applied Polymer Science. 116 (1), pp. 347-354. https://doi.org/10.1002/app.31608
Interfacial bonding characteristic of nanoclay/polymer composites
Chan, Mo-lin, Lau, Kin-tak, Wong, T. T. and Cardona, Francisco. 2011. "Interfacial bonding characteristic of nanoclay/polymer composites." Applied Surface Science. 258 (2), pp. 860-864. https://doi.org/10.1016/j.apsusc.2011.09.016
Tensile tests of phenol formaldehyde glass-powder-reinforced composites: pilot study
Ku, H., Trada, M., Cecil, T. and Wong, P.. 2010. "Tensile tests of phenol formaldehyde glass-powder-reinforced composites: pilot study." Journal of Applied Polymer Science. 116 (1), pp. 10-17. https://doi.org/10.1002/app.31424
Effects of fillers on the fracture behaviour of particulate polyester composites
Wong, K. J., Yousif, B. F., Low, K. O., Ng, Y. and Tan, S. L.. 2010. "Effects of fillers on the fracture behaviour of particulate polyester composites." Journal of Strain Analysis for Engineering Design. 45 (1), pp. 67-78. https://doi.org/10.1243/03093247JSA553
Effect of betelnut fibres treatment and contact conditions on adhesive wear and frictional performance of polyester composites
Nirmal, Umar, Yousif, B. F., Rilling, Dirk and Brevern, P. V.. 2010. "Effect of betelnut fibres treatment and contact conditions on adhesive wear and frictional performance of polyester composites." Wear. 268 (11-12), pp. 1354-1370. https://doi.org/10.1016/j.wear.2010.02.004
The possibility of using polymers in agriculture milling equipment
Al-Sandooq, J. M., Yousif, B. F. and Jensen, T. A.. 2011. "The possibility of using polymers in agriculture milling equipment." Banhazi, T., Saunders, C. and Hegarty, R. (ed.) SEAg 2011: Diverse Challenges, Innovative Solutions. Gold Coast, Australia 29 - 30 Sep 2011 Canberra, Australia.
Preparation and study of polypropylene/polyethylene terephthalate composite fibres
Si, Xiaojuan, Guo, Linfeng, Wang, Yimin and Lau, Kin-Tak. 2008. "Preparation and study of polypropylene/polyethylene terephthalate composite fibres." Composites Science and Technology. 68 (14), pp. 2943-2947. https://doi.org/10.1016/j.compscitech.2007.11.008
Mechanical and thermal properties of chicken feather fiber/PLA green composites
Cheng, Sha, Lau, Kin-Tak, Liu, Tao, Zhao, Yong-Qing, Lam, Pou-Man and Yin, Yansheng. 2009. "Mechanical and thermal properties of chicken feather fiber/PLA green composites ." Composites Part B: Engineering. 40 (7), pp. 650-654. https://doi.org/10.1016/j.compositesb.2009.04.011
The effects of alkali treatment on the interfacial adhesion of bamboo fibres
Wong, K. J., Yousif, B. F. and Low, K. O.. 2010. "The effects of alkali treatment on the interfacial adhesion of bamboo fibres." Proceedings of the Institution of Mechanical Engineers Part L: Journal of Materials, Design and Applications. 224 (3), pp. 139-148. https://doi.org/10.1243/14644207JMDA304
Sliding wear performance of nano-SiO2/short carbon fiber/epoxy hybrid composites
Guo, Qing Bing, Rong, Min Zhi, Jia, Guo Liang, Lau, Kin-Tak and Zhang, Ming Qiu. 2009. "Sliding wear performance of nano-SiO2/short carbon fiber/epoxy hybrid composites ." Wear. 266 (7-8), pp. 658-665. https://doi.org/10.1016/j.wear.2008.08.005
Synthesis of zirconia nanoparticles on carbon nanotubes and their potential for enhancing the fracture toughness of alumina ceramics
Zhu, Yue-Feng, Shi, Lei, Liang, Ji, Hui, David and Lau, Kin-Tak. 2008. "Synthesis of zirconia nanoparticles on carbon nanotubes and their potential for enhancing the fracture toughness of alumina ceramics." Composites Part B: Engineering. 39 (7-8), pp. 1136-1141. https://doi.org/10.1016/j.compositesb.2008.03.006
Remote access laboratories in Australia and Europe
Ku, H., Ahfock, T. and Yusaf, T.. 2011. "Remote access laboratories in Australia and Europe." European Journal of Engineering Education. 36 (3), pp. 253-268. https://doi.org/10.1080/03043797.2011.578244
Fabrication and mechanical properties of exfoliated clay-CNTs/epoxy nanocomposites
Wang, Zhicai, Xu, Cailing, Zhao, Yongqing, Zhao, Dandan, Wang, Zhe, Li, Hulin and Lau, Kin-Tak. 2008. "Fabrication and mechanical properties of exfoliated clay-CNTs/epoxy nanocomposites." Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing. 490 (1-2), pp. 481-487. https://doi.org/10.1016/j.msea.2008.01.040
Mechanical properties of epoxy-based composites using coiled carbon nanotubes
Li, Xiao-Feng, Lau, Kin-Tak and Yin, Yan-Sheng. 2008. "Mechanical properties of epoxy-based composites using coiled carbon nanotubes." Composites Science and Technology. 68 (14), pp. 2876-2881. https://doi.org/10.1016/j.compscitech.2007.10.019
Imparting ultra-low friction and wear rate to epoxy by the incorporation of microencapsulated lubricant?
Guo, Qing Bing, Lau, Kin-Tak, Zheng, Bing Fa, Rong, Min Zhi and Zhang, Ming Qiu. 2009. "Imparting ultra-low friction and wear rate to epoxy by the incorporation of microencapsulated lubricant?" Macromolecular Materials and Engineering. 294 (1), pp. 20-24. https://doi.org/10.1002/mame.200800257
Strain monitoring of RC members strengthened with smart NSM FRP bars
Wang, Bo, Teng, J. G., De Lorenzis, Laura, Zhou, Li-Min, Ou, Jinping, Jin, Wei and Lau, K. T.. 2009. "Strain monitoring of RC members strengthened with smart NSM FRP bars." Construction and Building Materials. 23 (4), pp. 1698-1711. https://doi.org/10.1016/j.conbuildmat.2008.07.027
Acousto-ultrasonic sensing for delaminated GFRP composites using an embedded FBG sensor
Lam, Pou-Man, Lau, Kin-Tak, Ling, Hang-Yin, Su, Zhong-Qing and Tam, Hwa-Yaw. 2009. "Acousto-ultrasonic sensing for delaminated GFRP composites using an embedded FBG sensor." Optics and Lasers in Engineering. 47 (10), pp. 1049-1055. https://doi.org/10.1016/j.optlaseng.2009.01.010
Composite panels for reducing noise in air conditioning and ventilation systems
Choy, Yat-Sze, Lau, Kin-Tak, Wang, C., Chau, C. W., Liu, Yang and Hui, D.. 2009. "Composite panels for reducing noise in air conditioning and ventilation systems." Composites Part B: Engineering. 40 (4), pp. 259-266. https://doi.org/10.1016/j.compositesb.2009.01.004
Literature review of past and present performance of the Nigerian manufacturing sector
Ku, H. S-L., Mustapha, U. and Goh, S.. 2010. "Literature review of past and present performance of the Nigerian manufacturing sector ." IMechE 2010: Institution of Mechanical Engineers. Lyon, France 04 Nov 2010 United Kingdom. SAGE Publications Ltd. https://doi.org/10.1243/09544054JEM1818
Carbon nanotube-reinforced nanocomposites
Lau, Alan kin-tak. 2011. "Carbon nanotube-reinforced nanocomposites." Lau, Alan kin-tak and Leng, Jinsong (ed.) Multifunctional polymer nanocomposites. Boca Raton, FL. United States. CRC Press. pp. 19-45
CNG-diesel engine performance and exhaust emission analysis with the aid of artificial neural network
Yusaf, Talal F., Buttsworth, D. R., Saleh, Khalid H. and Yousif, B. F.. 2010. "CNG-diesel engine performance and exhaust emission analysis with the aid of artificial neural network." Applied Energy. 87 (5), pp. 1661-1669. https://doi.org/10.1016/j.apenergy.2009.10.009
Sensors, actuators, and intelligent processing [Preface]
Lau, Kin-Tak, Epaarachchi, Jayantha and Sudarshan, T. S.. 2010. "Sensors, actuators, and intelligent processing [Preface]." Materials and Manufacturing Processes. 25 (4), pp. 211-211. https://doi.org/10.1080/10426910903425036
Tribological behaviour of KFRE composite
Chin, C. W. and Yousif, B. F.. 2010. "Tribological behaviour of KFRE composite." International Journal of Modern Physics B. 24 (28), pp. 5589-5599. https://doi.org/10.1142/S0217979210056232
Biocomposites: their multifunctionality
Lau, Kin-tak, Ho, Mei-po, Au-Yeung, Chi-ting and Cheung, Hoi-yan. 2010. "Biocomposites: their multifunctionality." International Journal of Smart and Nano Materials. 1 (1), pp. 13-27. https://doi.org/10.1080/19475411003589780
Effect of oil palm fibres volume fraction on mechanical properties of polyester composites
Yousif, B. F.. 2010. "Effect of oil palm fibres volume fraction on mechanical properties of polyester composites." International Journal of Modern Physics B. 24 (23), pp. 4459-4470. https://doi.org/10.1142/S0217979210056633
Three-body abrasion on wear and frictional performance of treated betelnut fibre reinforced epoxy (T-BFRE) composite
Yousif, B. F., Nirmal, Umar and Wong, K. J.. 2010. "Three-body abrasion on wear and frictional performance of treated betelnut fibre reinforced epoxy (T-BFRE) composite." Materials and Design. 31 (9), pp. 4514-4521. https://doi.org/10.1016/j.matdes.2010.04.008
Wear characteristics of thermoset composite under high stress three-body abrasive
Yousif, B. F. and El-Tayeb, N. S. M.. 2010. "Wear characteristics of thermoset composite under high stress three-body abrasive." Tribology International. 43 (12), pp. 2365-2371. https://doi.org/10.1016/j.triboint.2010.08.010
Characteristics of a silk fibre reinforced biodegradable plastic
Ho, Mei-Po, Lau, Kin-Tak, Wang, Hao and Bhattacharyya, Debes. 2011. "Characteristics of a silk fibre reinforced biodegradable plastic." Composites Part B: Engineering. 42 (2), pp. 117-122. https://doi.org/10.1016/j.compositesb.2010.10.007
Preliminary results on literature review skills of students doing capstone projects
Ku, Harry S. and Goh, Steven C.. 2010. "Preliminary results on literature review skills of students doing capstone projects." Goh, Steven C. and Wang, Hao (ed.) 2010 Southern Region Engineering Conference (SREC 2010). Toowoomba, Australia 11 - 12 Nov 2010 Toowoomba, Australia.
Effects of natural fibre surface on composite properties: a review
Kabir, M. M., Wang, H., Aravinthan, T., Cardona, F. and Lau, K. -T.. 2011. "Effects of natural fibre surface on composite properties: a review." Cowled, Craig J. L. (ed.) 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing (eddBE 2011). Brisbane, Australia 27 - 29 Apr 2011 Brisbane, Australia.
I-V characteristics and electro-mechanical response of different carbon black/epoxy composites
Ji, Xiaoyong, Li, Hui, Hui, David, Hsiao, Kuang-Ting, Ou, Jinping and Lau, Alan K. T.. 2010. "I-V characteristics and electro-mechanical response of different carbon black/epoxy composites." Composites Part B: Engineering. 41 (1), pp. 25-32. https://doi.org/10.1016/j.compositesb.2009.05.001
A review on the tensile properties of natural fiber reinforced polymer composites
Ku, H., Wang, H., Pattarachaiyakoop, N. and Trada, M.. 2011. "A review on the tensile properties of natural fiber reinforced polymer composites ." Composites Part B: Engineering. 42 (4), pp. 856-873. https://doi.org/10.1016/j.compositesb.2011.01.010
Thermal properties of sawdust reinforced vinyl ester composites post-cured in microwaves: a pilot study
Ku, H., Prajapati, M. and Cardona, F.. 2011. "Thermal properties of sawdust reinforced vinyl ester composites post-cured in microwaves: a pilot study ." Composites Part B: Engineering. 42 (4), pp. 898-906. https://doi.org/10.1016/j.compositesb.2011.01.008
A shape memory alloy energy absorber for backpack design
Lau, Sindy Mei-Ling, Lau, Kin-Tak, Yin, Yan-Sheng, Li, Lan, Wong, May, Chan, Kevin and Chen, William. 2010. "A shape memory alloy energy absorber for backpack design." Materials and Manufacturing Processes. 25 (4), pp. 281-286. https://doi.org/10.1080/10426910903426471
Optimization of tribological and mechanical properties of epoxy through hybrid filling
Guo, Qing Bing, Lau, Kin-Tak, Rong, Min Zhi and Zhang, Ming Qiu. 2010. "Optimization of tribological and mechanical properties of epoxy through hybrid filling." Wear. 269 (1-2), pp. 13-20. https://doi.org/10.1016/j.wear.2010.03.001
Silkworm silk/poly(lactic acid) biocomposites: dynamic mechanical, thermal and biodegradable properties
Zhao, Yong-Qing, Cheung, Hoi-Yan, Lau, Kin-Tak, Xu, Cai-Ling, Zhao, Dan-Dan and Li, Hu-Lin. 2010. "Silkworm silk/poly(lactic acid) biocomposites: dynamic mechanical, thermal and biodegradable properties." Polymer Degradation and Stability. 95 (10), pp. 1978-1987. https://doi.org/10.1016/j.polymdegradstab.2010.07.015
Thermal behavior of MWNT-reinforced thermoplastic natural rubber nanocomposites
Tarawneh, Mouad. A., Ahmad, Sahrim Hj., Rasid, Rozaidi, Yahya, S. Y., Lau, Kin-tak, Kong, Ing and Noum, Se Yong Eh. 2011. "Thermal behavior of MWNT-reinforced thermoplastic natural rubber nanocomposites." Journal of Reinforced Plastics and Composites. 30 (3), pp. 216-221. https://doi.org/10.1177/0731684410391512
Effect of surface treatment with potassium persulfate on dispersion stability of multi-walled carbon nanotubes
Park, Ok-kyung, Kim, Nam Hoon, Lau, Kin-Tak and Lee, Joong Hee. 2010. "Effect of surface treatment with potassium persulfate on dispersion stability of multi-walled carbon nanotubes." Materials Letters. 64 (6), pp. 718-721. https://doi.org/10.1016/j.matlet.2009.12.048
The electrochemistry corrosion behavior of Fe3Al-type intermetallic with super-hydrophobic surfaces
Liu, Tao, Lau, Kin-Tak, Chen, Shougang, Cheng, Sha, He, Tian and Yin, Yansheng. 2010. "The electrochemistry corrosion behavior of Fe3Al-type intermetallic with super-hydrophobic surfaces." Materials and Manufacturing Processes. 25 (5), pp. 298-301. https://doi.org/10.1080/10426911003747717
Measurement of bovine bone properties through surface indentation technique
Lau, Mei-ling, Lau, Kin-tak, Yao Yeo, Yan-Dong, Au Yeung, Chi-ting and Lee, Joong-hee. 2010. "Measurement of bovine bone properties through surface indentation technique." Materials and Manufacturing Processes. 25 (5), pp. 324-328. https://doi.org/10.1080/10426911003748137
Microscopical observation of the marine bacterium vibrio natriegeus growth on metallic corrosion
Cheng, Sha, Lau, Kin-Tak, Chen, Shougang, Chang, Xueting, Liu, Tao and Yin, Yansheng. 2010. "Microscopical observation of the marine bacterium vibrio natriegeus growth on metallic corrosion." Materials and Manufacturing Processes. 25 (5), pp. 293-297. https://doi.org/10.1080/10426911003747642
Polymer membranes for high temperature proton exchange membrane fuel cell: recent advances and challenge
Bose, Saswata, Kuila, Tapas, Nguyen, Thi Xuan Hien, Kim, Nam Hoon, Lau, Kin-tak and Lee, Joong Hee. 2011. "Polymer membranes for high temperature proton exchange membrane fuel cell: recent advances and challenge." Progress in Polymer Science. 36 (6), pp. 813-843. https://doi.org/10.1016/j.progpolymsci.2011.01.003
Thin-layer drying characteristics of banana slices in a force convection indirect solar drying
Fadhel, M. I., Abdo, Ramez Abdulwasea, Yousif, B. F., Zaharim, Azami and Sopian, K.. 2011. "Thin-layer drying characteristics of banana slices in a force convection indirect solar drying." Bojkovic, Zoran, Kacprzyk, Janusz, Mastorakis, Nikos, Mladenov, Valeri, Revetria, Roberto, Zadeh, Lotfi A. and Zemliak, Alexander (ed.) 6th IASME/WSEAS International Conference on Energy and Environment (EE 2011): Recent Researches in Energy and Environment. Cambridge, United Kingdom 23 - 25 Feb 2011 Cambridge, United Kingdom.
Badminton training machine with impact mechanism
Yousif, B. F. and Yeh, Kok Soon. 2011. "Badminton training machine with impact mechanism." Journal of Engineering Science and Technology. 6 (1), pp. 61-68.
Qualitative methodologies for dummies: engineers in investigating the quality of final year engineering research project
Goh, Steven and Ku, Harry. 2010. "Qualitative methodologies for dummies: engineers in investigating the quality of final year engineering research project." Hudson, Peter, Chandra, Vinesh, King, Donna and Lee, Kar-Tin (ed.) 1st Science, Technology, Engineering and Mathematics in Education Conference (STEM 2010). Brisbane, Australia 26 - 27 Nov 2010 Brisbane, Australia.
Study on the mechanical properties of different silkworm silk fibers
Cheung, Hoi-Yan, Ho, Mei-po, Lau, Kin-tak and Mosallam, Ayman. 2009. "Study on the mechanical properties of different silkworm silk fibers." Journal of Composite Materials. 43 (22), pp. 2521-2531. https://doi.org/10.1177/0021998309345347
Effect of tannin on flexural properties of phenol formaldehyde glycerol reinforced composites: preliminary results
Cardona, F., Ku, H. and Chouzenoux, L.. 2010. "Effect of tannin on flexural properties of phenol formaldehyde glycerol reinforced composites: preliminary results ." Journal of Reinforced Plastics and Composites. 29 (24), pp. 3543-3553. https://doi.org/10.1177/0731684410381152
Biodegradation of a silkworm silk/PLA composite
Cheung, Hoi-Yan, Lau, Kin-Tak, Pow, Yu-Fung, Zhao, Yong-Qing and Hui, David. 2010. "Biodegradation of a silkworm silk/PLA composite." Composites Part B: Engineering. 41 (3), pp. 223-228. https://doi.org/10.1016/j.compositesb.2009.09.004
Work in Progress - Intervening to Improve the Dissertation of Final Year Engineering Research Projects
Goh, Steven and Ku, Harry. 2011. "Work in Progress - Intervening to Improve the Dissertation of Final Year Engineering Research Projects." 41st ASEE/IEEE Frontiers in Education Conference (FIE 2011): Celebrating 41 Years of Monumental Innovations from around the World. Rapid City, United States 12 - 15 Oct 2011 United States. https://doi.org/10.1109/FIE.2011.6142897
In-situ synthesis and characterization of electrically conductive polypyrrole/graphene nanocomposites
Bose, Saswata, Kuila, Tapas, Uddin, Md. Elias, Kim, Nam Hoon, Lau, Alan K. T. and Lee, Joong Hee. 2010. "In-situ synthesis and characterization of electrically conductive polypyrrole/graphene nanocomposites." Polymer. 51 (25), pp. 5921-5928. https://doi.org/10.1016/j.polymer.2010.10.014
Nanodiamond/poly (lactic acid) nanocomposites: effect of nanodiamond on structure and properties of poly (lactic acid)
Zhao, Yong-Qing, Lau, Kin-Tak, Kim, Jang-Kyo, Xu, Cai-Ling, Zhao, Dan-Dan and Li, Hu-Lin. 2010. "Nanodiamond/poly (lactic acid) nanocomposites: effect of nanodiamond on structure and properties of poly (lactic acid)." Composites Part B: Engineering. 41 (8), pp. 646-653. https://doi.org/10.1016/j.compositesb.2010.09.003
Using computer software packages to enhance the teaching in engineering management science: part 3 - simulation
Ku, H. and Fulcher, R.. 2012. "Using computer software packages to enhance the teaching in engineering management science: part 3 - simulation ." Computer Applications in Engineering Education. 20 (3), pp. 547-552. https://doi.org/10.1002/cae.20423
Using computer software packages to enhance the teaching in engineering management science: part 2 - programming techniques
Ku, H. and Fulcher, R.. 2012. "Using computer software packages to enhance the teaching in engineering management science: part 2 - programming techniques ." Computer Applications in Engineering Education. 20 ( 1), pp. 114-123. https://doi.org/10.1002/cae.20379
The potential of using treated betelnut fibres as reinforcement for tribo-bio polymeric composites subjected to dry/wet contact conditions
Nirmal, Umar, Jamil, Nadia, Yousif, B. F., Rilling, Dirk and Brevern, P. V.. 2010. "The potential of using treated betelnut fibres as reinforcement for tribo-bio polymeric composites subjected to dry/wet contact conditions." 2nd International Conference on Natural Polymers, Bio-Polymers, Bio-Materials, their Composites, Blends, IPN's and Gels Polyelectrolytes and Gels: Macro to Nano Scales (ICNP - 2010). Kottayam, India 24 - 26 Sep 2010 India.
On the development of solar drying system
Chai, Adrian Ngu Ming, Ibrahim, M., Chuan, Cheah Bin and Yousif, B. F.. 2010. "On the development of solar drying system." 2009 ASME International Mechanical Engineering Congress and Exposition (IMECE 2009). Florida, United States of America 13 - 19 Nov 2009 Boston, MA. United States. https://doi.org/10.1115/IMECE2009-12294
The potential of using betelnut fibres for tribo-polyester composites considering three different orientations
Yousif, B. F., Gill, Nirmal Singh, Lau, Saijod T. W. and Devadas, Alvin. 2009. "The potential of using betelnut fibres for tribo-polyester composites considering three different orientations." 2008 ASME International Mechanical Engineering Congress and Exposition (IMECE 2008). Boston, United States of America 31 Oct - 06 Nov 2008 Boston, MA. United States. https://doi.org/10.1115/IMECE2008-68648
Adhesive and frictional behaviour of polymeric composites based on kenaf fibre
Chin, C. W. and Yousif, B. F.. 2008. "Adhesive and frictional behaviour of polymeric composites based on kenaf fibre." Sinha, Sujeet (ed.) 2nd International Conference on Advanced Tribology (iCAT 2008). Singapore 03 - 05 Dec 2008 Singapore.
A pilot study on the flexural properties of vinyl ester composites filled with glass powder
Ku, H., Trada, M. and Huq, R.. 2010. "A pilot study on the flexural properties of vinyl ester composites filled with glass powder ." Advanced Materials Research. 123-125, pp. 3-6. https://doi.org/10.4028/www.scientific.net/AMR.123-125.3
Tribological evaluations of polyester composites considering three orientations of CSM glass fibres using BOR machine
Yousif, B. F. and El-Tayeb, N. S. M.. 2007. "Tribological evaluations of polyester composites considering three orientations of CSM glass fibres using BOR machine." Applied Composite Materials. 14 (2), pp. 105-116. https://doi.org/10.1007/s10443-007-9034-2
Design consideration of low temperature differential double-acting Stirling engine for solar application
Abdullah, Shahrir, Yousif, B. F. and Sopian, Kamaruzzaman. 2005. "Design consideration of low temperature differential double-acting Stirling engine for solar application." Renewable Energy. 30 (1), pp. 1923-1941. https://doi.org/10.1016/j.renene.2004.11.011
Abrasive wear behaviour of epoxy composite based on kenaf fibres
Yousif, B. F. and Yusaf, Talal. 2010. "Abrasive wear behaviour of epoxy composite based on kenaf fibres." Gwidon, Stachowiak (ed.) ASIATRIB 2010: Frontiers in Tribology - Knowledge and Friendship. Perth, Australia 05 - 09 Dec 2010
Adhesive wear and frictional characteristics of UHMWPE and HDPE sliding against different counterfaces under dry contact condition
Yousif, B. F., Alsofyani, I. M. and Yusaf, Talal. 2010. "Adhesive wear and frictional characteristics of UHMWPE and HDPE sliding against different counterfaces under dry contact condition." Tribology. 4 (2), pp. 78-85. https://doi.org/10.1179/175158310X12678019274408
An investigation on worn surfaces of chopped glass fibre reinforced polyester through SEM observations
El-Tayeb, N. S. M., Yousif, B. F. and Yap, T. C.. 2008. "An investigation on worn surfaces of chopped glass fibre reinforced polyester through SEM observations." Tribology International. 41 (5), pp. 331-340. https://doi.org/10.1016/j.triboint.2007.07.007
Frictional and wear performance of polyester composites based on coir fibres
Yousif, B. F.. 2009. "Frictional and wear performance of polyester composites based on coir fibres." Proceedings of the Institution of Mechanical Engineers Part J: Journal of Engineering Tribology. 223 (1), pp. 51 -59. https://doi.org/10.1243/13506501JET455
Wear and frictional performance of betelnut fibre-reinforced polyester composite
Gill, N. Singh and Yousif, B. F.. 2009. "Wear and frictional performance of betelnut fibre-reinforced polyester composite." Proceedings of the Institution of Mechanical Engineers Part J: Journal of Engineering Tribology. 223 (2), pp. 183-194. https://doi.org/10.1243/13506501JET516
Evaluation of glass fiber reinforced polyester composite for multi-pass abrasive wear applications
El-Tayeb, N. S. M. and Yousif, B. F.. 2007. "Evaluation of glass fiber reinforced polyester composite for multi-pass abrasive wear applications." Wear. 262 (9-10), pp. 1140-1151. https://doi.org/10.1016/j.wear.2006.11.015
Tribological studies of polyester reinforced with CSM 450-R-glass fiber sliding against smooth stainless steel counterface
El-Tayeb, N. S. M., Yousif, B. F. and Yap, T. C.. 2005. "Tribological studies of polyester reinforced with CSM 450-R-glass fiber sliding against smooth stainless steel counterface." Wear. 261 (3-4), pp. 443-452. https://doi.org/10.1016/j.wear.2005.12.014
On the effect of counterface materials on tribo-behavior of steel wire sliding under dry contact condition
Chee, Su Be, Al Shalabi, Ammar and Yousif, B. F.. 2008. "On the effect of counterface materials on tribo-behavior of steel wire sliding under dry contact condition." Surface Review and Letters. 15 (4), pp. 355-360. https://doi.org/10.1142/S0218625X08011482
Adhesive wear performance of CFRP multilayered polyester composites under dry/wet contact conditions
Danaelan, D. and Yousif, B. F.. 2008. "Adhesive wear performance of CFRP multilayered polyester composites under dry/wet contact conditions." Surface Review and Letters. 15 (6), pp. 919-925. https://doi.org/10.1142/S0218625X08012116
The effect of oil palm fibers as reinforcement on tribological performance of polyester composite
Yousif, B. F. and El-Tayeb, N. S. M.. 2007. "The effect of oil palm fibers as reinforcement on tribological performance of polyester composite." Surface Review and Letters. 14 (6), pp. 1095-1102. https://doi.org/10.1142/S0218625X07010561
On the effect of woven glass fabric orientations on wear and friction properties of polyester composite
Yousif, B. F. and El-Tayeb, N. S. M.. 2007. "On the effect of woven glass fabric orientations on wear and friction properties of polyester composite." Surface Review and Letters. 14 (3), pp. 489-497. https://doi.org/10.1142/S0218625X07009487
Effect of water as lubricant on friction and wear properties of CGRP composite evaluated by POD and BOR techniques
Yousif, B. F. and El-Tayeb, N. S. M.. 2007. "Effect of water as lubricant on friction and wear properties of CGRP composite evaluated by POD and BOR techniques." Surface Review and Letters. 14 (2), pp. 185-191. https://doi.org/10.1142/S0218625X07009244
Development of polymer network of phenolic and epoxies resins mixed with linseed oil: pilot study
Ku, H., Cardona, F., Rogers, D. and Munoz, J.-C.. 2010. "Development of polymer network of phenolic and epoxies resins mixed with linseed oil: pilot study ." Journal of Materials Engineering and Performance. 19 (6), pp. 912-919. https://doi.org/10.1007/s11665-009-9549-9
Replacing of glass fibres with seed oil palm fibres for tribopolymeric composites
Yousif, B. F.. 2008. "Replacing of glass fibres with seed oil palm fibres for tribopolymeric composites." Tribology. 2 (2), pp. 99-103. https://doi.org/10.1179/175158308X383189
Final year engineering projects in Australia and Europe
Ku, H. and Goh, S.. 2010. "Final year engineering projects in Australia and Europe." European Journal of Engineering Education. 35 (2), pp. 161-173. https://doi.org/10.1080/03043790903497336
Optimum percentage of fly ash reinforcement in vinyl ester composites
Ku, H., Kota, V. and Trada, M.. 2010. "Optimum percentage of fly ash reinforcement in vinyl ester composites ." Journal of Materials in Civil Engineering. 22 (1), pp. 104-107. https://doi.org/10.1061/(ASCE)0899-1561(2010)22:1(104)
A lucrative export - engineering education: down under
Ross, David, Ku, Harry S. and Penfold, Peter. 2009. "A lucrative export - engineering education: down under." DIAS Technology Review. 5 (2), pp. 14-23.
Adhesive wear performance of T-OPRP and UT-OPRP composites
El-Tayeb, N. S. M. and Yousif, B. F.. 2008. "Adhesive wear performance of T-OPRP and UT-OPRP composites." Tribology Letters. 32 (3), pp. 199-208. https://doi.org/10.1007/s11249-008-9381-7
Fracture behaviour of glass fibre-reinforced polyester composite
Leonard, L. W. H., Wong, K. J., Low, K. O. and Yousif, B. F.. 2009. "Fracture behaviour of glass fibre-reinforced polyester composite." Proceedings of the Institution of Mechanical Engineers Part L: Journal of Materials, Design and Applications. 223 (2), pp. 83-89. https://doi.org/10.1243/14644207JMDA224
An artificial neural network for prediction of the friction coefficient of multi-layer polymeric composites in three different orientations
Nasir, T., Yousif, B. F., McWilliam, S., Salih, N. D. and Hui, L. T.. 2010. "An artificial neural network for prediction of the friction coefficient of multi-layer polymeric composites in three different orientations." Proceedings of the Institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science. 224 (2), pp. 419-429. https://doi.org/10.1243/09544062JMES1677
Polyester composite based on betelnut fibre for tribological applications
Yousif, B. F., Lau, Saijod T. W. and McWilliam, S.. 2010. "Polyester composite based on betelnut fibre for tribological applications." Tribology International. 43 (1-2), pp. 503-511. https://doi.org/10.1016/j.triboint.2009.08.006
Flexural properties of sawdust reinforced phenolic composites: pilot study
Ku, Harry Siu-Lung, Cardona, Francisco, Trada, Mohar and Vigier, Gurlaume. 2009. "Flexural properties of sawdust reinforced phenolic composites: pilot study." Journal of Applied Polymer Science. 114 (3), pp. 1927-1934. https://doi.org/10.1002/app.30610
Engineering education in China and Australia: addressing the demand-supply gap
Ku, Siu Lung Harry, Wen, Peng and Xiang, Wei. 2010. "Engineering education in China and Australia: addressing the demand-supply gap." Hong Kong Institution of Engineers, Transactions. 17 (2), pp. 20-26.
Flexural properties of phenolic resin reinforced with glass powder
Ku, Harry S., Trada, Mohan, Zong, Xuejin and Wong, Peter. 2009. "Flexural properties of phenolic resin reinforced with glass powder." Liao, W. H. (ed.) ICAST 2009: 20th International Conference on Adaptive Structures and Technologies . Shatin, Hong Kong 20 - 22 Oct 2009 Hong Kong.
Flexural strength of phenol formaldehyde composites post-cured in microwaves: preliminary results
Trada, Mohan, Ku, Harry and Vedhar, Jayant. 2009. "Flexural strength of phenol formaldehyde composites post-cured in microwaves: preliminary results ." Advanced Materials Research. https://doi.org/10.4028/www.scientific.net/AMR.79-82.1399
Teaching of critical path networks using software packages
Ku, H.. 2009. "Teaching of critical path networks using software packages ." Wen, Peng, Li, Yuefeng, Polkowski, Lech, Yao, Yiyu, Tsumoto, Shusaku and Wang, Guoyin (ed.) 4th International Conference on Rough Sets and Knowledge Technology (RSKT 2009). Gold Coast, Australia 14 - 16 Jul 2009 Berlin, Germany. Springer. https://doi.org/10.1007/978-3-642-02962-2_55
Potential of kenaf fibres as reinforcement for tribological applications
Chin, C. W. and Yousif, B. F.. 2009. "Potential of kenaf fibres as reinforcement for tribological applications." Wear. 267 (9-10), pp. 1550-1557. https://doi.org/10.1016/j.wear.2009.06.002
Natural fibre-reinforced composites for bioengineering and environmental engineering
Cheung, Hoi-Yan, Ho, Mei-Po, Lau, Kin-Tak, Cardona, Francisco and Hui, David. 2009. "Natural fibre-reinforced composites for bioengineering and environmental engineering." Composites Part B: Engineering. 40 (7), pp. 655-663. https://doi.org/10.1016/j.compositesb.2009.04.014
Fracture toughness of phenol formaldehyde composites reinforced with e-spheres
Ku, H., Cardona, F., Pattarachaiyakoop, N. and Trada, M.. 2009. "Fracture toughness of phenol formaldehyde composites reinforced with e-spheres ." Journal of Composite Materials. 43 (7), pp. 741-754. https://doi.org/10.1177/0021998308101296
Contrasts on fracture toughness and flexural strength of varying percentages of SLG-reinforced phenolic composites
Ku, H. S., Fok, S. C. and Siores, E.. 2009. "Contrasts on fracture toughness and flexural strength of varying percentages of SLG-reinforced phenolic composites." Journal of Composite Materials. 43 (8), pp. 885-895. https://doi.org/10.1177/0021998308103159
A simplified empirical model for prediction of mechanical properties of random short fiber/vinylester composites
Epaarachchi, J., Ku, H. and Gohel, K.. 2010. "A simplified empirical model for prediction of mechanical properties of random short fiber/vinylester composites." Journal of Composite Materials. 44 (6), pp. 779-788. https://doi.org/10.1177/0021998309346383
Flexural tests of phenol formaldehyde and SLG composites: pilot study
Cardona, F., Rogers, D., Gurney, R., Trada, M. and Ku, H.. 2009. "Flexural tests of phenol formaldehyde and SLG composites: pilot study ." Journal of Reinforced Plastics and Composites. 28 (22), pp. 2761-2769. https://doi.org/10.1177/0731684408093871
Performance and exhaust emission of a SI engine fuelled with potato waste ethanol and its blends with gasoline
Najafi, G., Yusaf, T. F., Ghobadian, B., Najmeddin, V. R. and Yousif, B. F.. 2009. "Performance and exhaust emission of a SI engine fuelled with potato waste ethanol and its blends with gasoline." International Energy Journal. 10 (4), pp. 215-226.
Use of wireless tablet PCs as an effective learning and teaching enhancement tool
Xiang, Wei, Goh, Steven, Pather, Selvan, Maxwell, Andrew, Wang, Hao and Ku, Harry. 2009. "Use of wireless tablet PCs as an effective learning and teaching enhancement tool." Foley, Chris (ed.) EDUCAUSE Australasia Conference 2009: Innovate, Collaborate and Sustain. Perth, Australia 03 - 06 May 2009 Wembley, Western Australia.
Mathematical modeling of the fracture toughness of phenol formaldehyde composites reinforced with E-spheres
Ku, H., Xiang, W. and Pattarachaiyakoop, N.. 2009. "Mathematical modeling of the fracture toughness of phenol formaldehyde composites reinforced with E-spheres ." Advanced Materials Research. 79-82, pp. 1165-1168. https://doi.org/10.4028/www.scientific.net/AMR.79-82.1165
Adhesive wear and frictional behaviour of multilayered polyester composite based on betelnut fiber mats under wet contact conditions
Yousif, B. F., Devadas, Alvin and Yusaf, Talal. 2009. "Adhesive wear and frictional behaviour of multilayered polyester composite based on betelnut fiber mats under wet contact conditions." Surface Review and Letters. 16 (3), pp. 407-414. https://doi.org/10.1142/S0218625X09012792
Tensile tests of phenol formaldehyde SLG reinforced composites: pilot study
Ku, H., Jacobson, W., Trada, M., Cardona, F. and Rogers, D.. 2008. "Tensile tests of phenol formaldehyde SLG reinforced composites: pilot study." Journal of Composite Materials. 42 (26), pp. 2783-2793. https://doi.org/10.1177/0021998308096334
Editorial
Venkatesh, V. C. and Yousif, Belal F.. 2009. "Editorial." International Journal of Manufacturing Technology and Management. 17 (4).
Relationship between electrical and mechanical loss tangents of SLG reinforced phenolic composites: pilot study
Ku, H., Cardona, F., Ball, J., Jacobson, W. and Trada, M.. 2008. "Relationship between electrical and mechanical loss tangents of SLG reinforced phenolic composites: pilot study ." Journal of Composite Materials. 42 (19), pp. 2083-2095. https://doi.org/10.1177/0021998308094548
Hong Kong Higher Diploma in Engineering and Australian Bachelor of Technology in Engineering: similarities and differences
Morgan, Michael J., Fulcher, Robert and Ku, Harry S.. 1996. "Hong Kong Higher Diploma in Engineering and Australian Bachelor of Technology in Engineering: similarities and differences." Asia Engineer.
Articulation, credit transfer and flexible delivery of engineering degree courses: Australia, Malaysia and Hong Kong
Morgan, M. J., Fulcher, R. L. and Ku, H. S.. 1998. "Articulation, credit transfer and flexible delivery of engineering degree courses: Australia, Malaysia and Hong Kong." Jurutera: Institution of Engineers Malaysia Monthly Bulletin. 1998 (1), pp. 57-67.
Innovative residential schools for engineering degree courses
Morgan, Michael J., Fulcher, Robert and Ku, Harry S.. 1999. "Innovative residential schools for engineering degree courses ." Quarterly Journal of Singapore Institute of Engineering Technologists. 18 (4), pp. 53-58.
Loss tangent for low loss thermoplastic composites
Ku, Harry S., Ball, James A. R., Siores, Elias and Chan, Peter. 1999. "Loss tangent for low loss thermoplastic composites ." Science and Engineering of Composite Materials. 8 (3), pp. 123-128.
Microwave facilities for welding thermoplastic composites and preliminary results
Ku, Harry S., Siores, Elias and Ball, James A. R.. 1999. "Microwave facilities for welding thermoplastic composites and preliminary results." Journal of Microwave Power and Electromagnetic Energy. 34 (4), pp. 195-205.
Variable frequency microwave (VFM) processing facilities and application in processing thermoplastic matrix composites
Ku, Harry S., Siu, Fred, Siores, Elias, Ball, James A. R. and Blicblau, A. S.. 2000. "Variable frequency microwave (VFM) processing facilities and application in processing thermoplastic matrix composites ." Lee, W. B. (ed.) IMCC'2000: 9th International Manufacturing Conference in China: Innovation and Technology for the New Millennium. Hong Kong, China 16 - 17 Aug 2000 Hong Kong.
Microwave processing and permittivity measurement of thermoplastic composites at elevated temperature
Ku, Harry S., Ball, James A. R., Siores, Elias and Horsfield, Brendan. 1999. "Microwave processing and permittivity measurement of thermoplastic composites at elevated temperature ." Journal of Materials Processing Technology. 89-90, pp. 419-424. https://doi.org/10.1016/S0924-0136(99)00018-7
An important step in microwave processing of materials: permittivity measurements of thermoplastic composites at elevated temperatures
Ku, Harry S., Siores, Elias, Ball, James A. R. and Horsfield, Brendan. 1998. "An important step in microwave processing of materials: permittivity measurements of thermoplastic composites at elevated temperatures." Salem, Sam (ed.) 1998 Pacific Conference on Manufacturing. Brisbane, Australia 18 - 21 Aug 1998 Brisbane, Australia.
Characterisation of thermoplastic matrix composites (TPC) using variable frequency micorwave (VFM)
Ku, Harry S., MacRobert, Martin, Siores, Elias and Ball, James A. R.. 2000. "Characterisation of thermoplastic matrix composites (TPC) using variable frequency micorwave (VFM)." Plastics Rubber and Composites. 29 (6), pp. 285-287.
Variable frequency microwave processing of thermoplastic composites
Ku, Harry S., MacRobert, Martin, Siores, Elias and Ball, James A. R.. 2000. "Variable frequency microwave processing of thermoplastic composites ." Plastics Rubber and Composites. 29 (6), pp. 278-284.
Effects of catalysts and post-curing conditions in the polymer network of epoxy and phenolic resins: preliminary results
Munoz, J.-C., Ku, H., Cardona, F. and Rogers, D.. 2008. "Effects of catalysts and post-curing conditions in the polymer network of epoxy and phenolic resins: preliminary results ." Journal of Materials Processing Technology. 202 (1-3), pp. 486-492. https://doi.org/10.1016/j.jmatprotec.2007.10.025
Influence of material structure properties on sliding contact performance of CGRP composite
Yousif, B. F., El-Tayeb, N. S. M. and Yusaf, Talal. 2008. "Influence of material structure properties on sliding contact performance of CGRP composite." International Journal for Manufacturing Science and Technology. 10 (1), pp. 1-7.
Fracture toughness of phenol formaldehyde composites: pilot study
Ku, Harry, Rogers, David, Davey, Robert, Cardona, Francisco and Trada, Mohan. 2008. "Fracture toughness of phenol formaldehyde composites: pilot study." Journal of Materials Engineering and Performance. 17 (1), pp. 85-90. https://doi.org/10.1007/s11665-007-9115-2
Contrast joints of glass-fibre with carbon-fibre reinforced low density polyethylene composite bonded by microwave irradiation
Ku, H. S.. 2008. "Contrast joints of glass-fibre with carbon-fibre reinforced low density polyethylene composite bonded by microwave irradiation." Journal of Electromagnetic Waves and Applications. 22 (1), pp. 69-84. https://doi.org/10.1163/156939308783122760
Processing of composites using variable and fixed frequency microwave facilities
Ku, Harry S. and Yusaf, Talal. 2008. "Processing of composites using variable and fixed frequency microwave facilities." Progress in Electromagnetic Research B. 5, pp. 185-205. https://doi.org/10.2528/PIERB08011304
Shrinkage reduction of thermoset fibre composites during hardening using microwaves irradiation for curing
Ku, Harry S., Van Erp, Gerard, Ball, James A. R., Ayers, Stephen R. and Siu, Fred. 2002. "Shrinkage reduction of thermoset fibre composites during hardening using microwaves irradiation for curing." Wong, S. V., Osman, M. R., Yusuff, R. M. and Ismail, N. (ed.) 2nd World Engineering Congress (WEC 2002). Sarawak, Malaysia 22 - 25 Jul 2002 Malaysia.
An evaluation of fracture toughness of vinyl ester composites cured under microwave conditions
Ku, H., Chan, W. L., Trada, M. and Baddeley, D.. 2007. "An evaluation of fracture toughness of vinyl ester composites cured under microwave conditions." Journal of Materials Engineering and Performance. 16 (6), pp. 741-745. https://doi.org/10.1007/s11665-007-9104-5
Managing the delivery of 'Manufacturing Processes' in an Australian regional university known for excellence in e-learning
Ross, David and Ku, Harry S.. 2007. "Managing the delivery of 'Manufacturing Processes' in an Australian regional university known for excellence in e-learning ." Delhi Institute of Advanced Studies Technology Review. 4 (1), pp. 46-54.
Relationship between microwave irradiation and constituents of composites during joining process
Ku, H. S., Ball, J. A. R. and Siores, E.. 2000. "Relationship between microwave irradiation and constituents of composites during joining process." Transactions, Hong Kong Institution of Engineers. 7 (3), pp. 43-49. https://doi.org/10.1080/1023697X.2000.10667833
Applications of microwaves in non-destructive testing
Ku, H. S., Siu, F., Siores, E. and Ball, J. A. R.. 2001. "Applications of microwaves in non-destructive testing." 10th Asia Pacific Conference on Non-Destructive Testing (2001). Brisbane, Australia 17 - 21 Sep 2001 Melbourne, Australia.
The process of updating engineering management science in an Australian regional university excellence in developing e-learning
Ku, Harry S. and Fulcher, Robert. 2007. "The process of updating engineering management science in an Australian regional university excellence in developing e-learning ." European Journal of Engineering Education. 32 (5), pp. 527-538. https://doi.org/10.1080/03043790701433319
Fracture toughness of phenol formaldehyde composites post-cured in microwaves
Cardona, F., Ku, H., Pattarachaiyakoop, N., Rogers, D. and Trada, M.. 2007. "Fracture toughness of phenol formaldehyde composites post-cured in microwaves." Journal of Electromagnetic Waves and Applications. 21 (14), pp. 2137-2146. https://doi.org/10.1163/156939307783152867
Characterisation of chip-on-board (COB) encapsulate epoxies used in the printed circuit board assembly (PCBA) industry using variable frequency microwave (VFM) facilities
Ku, H. S., Siu, F., Mok, P. L., Siores, E. and Ball, J. A. R.. 2002. "Characterisation of chip-on-board (COB) encapsulate epoxies used in the printed circuit board assembly (PCBA) industry using variable frequency microwave (VFM) facilities." Wong, S. V., Osman, M. R., Yusuff, R. M. and Ismail, N. (ed.) 2nd World Engineering Congress (WEC 2002). Sarawak, Malaysia 22 - 25 Jul 2002 Selangor Darul Ehsan, Malaysia.
Applications of fixed and variable frequency microwave (VFM) facilities in polymeric materials processing and joining
Ku, H. S., Siu, F., Siores, E. and Ball, J. A. R.. 2002. "Applications of fixed and variable frequency microwave (VFM) facilities in polymeric materials processing and joining ." Wong, S. V., Osman, M. R., Yusuff, R. M. and Ismail, N. (ed.) 2nd World Engineering Congress (WEC 2002). Sarawak, Malaysia 22 - 25 Jul 2002 Selangor Darul Ehsan, Malaysia.
Contrast joints of glass-fibre with carbon-fibre reinforced polystyrene composite bonded by microwave irradiation
Ku, Harry S.. 2003. "Contrast joints of glass-fibre with carbon-fibre reinforced polystyrene composite bonded by microwave irradiation ." Transactions, Hong Kong Institution of Engineers. 10 (2), pp. 10-16.
Review - microwave processing of materials: part III
Ku, Harry S., Siores, Elias and Ball, James A. R.. 2001. "Review - microwave processing of materials: part III." Transactions, Hong Kong Institution of Engineers. 8 (3), pp. 44-50.
Review - microwave processing of materials: part II
Ku, Harry S., Siores, Elias and Ball, James A. R.. 2001. "Review - microwave processing of materials: part II." Transactions, Hong Kong Institution of Engineers. 8 (3), pp. 38-43.
Review - microwave processing of materials: part I
Ku, Harry S., Siores, Elias and Ball, James A. R.. 2001. "Review - microwave processing of materials: part I." Transactions, Hong Kong Institution of Engineers. 8 (3), pp. 31-37.
Permittivity measurement of thermoplastic composites at elevated temperature
Ku, Harry S., Horsfield, Brendan, Ball, James A. R. and Siores, Elias. 2001. "Permittivity measurement of thermoplastic composites at elevated temperature." Journal of Microwave Power and Electromagnetic Energy. 36 (2), pp. 101-111.
Applications of fixed and variable frequency microwave (VFM) facilities in polymeric materials processing and joining
Ku, H. S., Siu, F., Siores, E., Ball, J. A. R. and Blicblau, A. S.. 2001. "Applications of fixed and variable frequency microwave (VFM) facilities in polymeric materials processing and joining." 5th Asia Pacific Conference on Materials Processing. Seoul, South Korea 25 Jun 2001 Lausanne, Switzerland. https://doi.org/10.1016/S0924-0136(01)00642-2
Heat distribution and thermal analysis of joining thermoplastic composites using microwave energy
Ku, Harry S., Li, Chun Wai and Lee, Kin Fung. 2002. "Heat distribution and thermal analysis of joining thermoplastic composites using microwave energy." Institution of Engineers, Malaysia. Journal. 64 (2), pp. 6-12.
Microwave energy effects on polymer-matrix and fibre reinforcement of composites during bonding process by microwaves
Ku, Harry S., Siores, Elias and Ball, James A. R.. 2002. "Microwave energy effects on polymer-matrix and fibre reinforcement of composites during bonding process by microwaves." Institution of Engineers, Malaysia. Journal. 63 (4), pp. 20-27.
Lap shear strength comparison between two types of random carbon fibre reinforced thermoplastic matrix composites bonded using variable frequency microwaves (VFM) irradiation
Ku, Harry S., Siores, Elias and Ball, James A. R.. 2002. "Lap shear strength comparison between two types of random carbon fibre reinforced thermoplastic matrix composites bonded using variable frequency microwaves (VFM) irradiation." Journal of Materials Synthesis and Processing. 9 (6), pp. 353-361.
Joining of thirty three percent by weight random glass fibre reinforced polystyrene using variable frequency microwave
Ku, Harry S., Siores, Elias, Ball, James A. R. and Taube, Alex. 2002. "Joining of thirty three percent by weight random glass fibre reinforced polystyrene using variable frequency microwave." Institution of Engineers, Malaysia. Journal. 63 (2), pp. 18-24.
Risks involved in curing vinyl ester resins using microwaves irradiation
Ku, Harry S.. 2002. "Risks involved in curing vinyl ester resins using microwaves irradiation." Journal of Materials Synthesis and Processing. 10 (2), pp. 97-106.
Productivity improvements through the use of industrial microwave technologies
Ku, Harry S., Siores, Elias, Taube, Alex and Ball, James A. R.. 2002. "Productivity improvements through the use of industrial microwave technologies." Computers and Industrial Engineering. 42 (2-4), pp. 281-290.
Curing vinyl ester particle-reinforced composites using microwaves
Ku, H.. 2003. "Curing vinyl ester particle-reinforced composites using microwaves." Journal of Composite Materials. 37 (22), pp. 2027-2042. https://doi.org/10.1177/0021998303036266
Thermal analysis comparison between two random glass fibre reinforced thermoplastic matrix composites bonded by adhesives using microwaves: preliminary results
Ku, Harry S., Lee, Kin Fung and Li, Chun Wai. 2003. "Thermal analysis comparison between two random glass fibre reinforced thermoplastic matrix composites bonded by adhesives using microwaves: preliminary results." Journal of Electromagnetic Waves and Applications. 17 (6), pp. 901-918. https://doi.org/10.1163/156939303322503501
Thermal analysis of joining thermoplastic matrix composites using microwaves
Ku, Harry S., Lee, Kin Fung and Li, Chun Wai. 2003. "Thermal analysis of joining thermoplastic matrix composites using microwaves." Transactions, Hong Kong Institution of Engineers. 10 (1), pp. 14-20.
Lap shear strength comparison between different random glass fibre reinforced thermoplastic matrix composites bonded by adhesives using variable frequency microwaves (VFM) irradiation
Ku, Harry S., Siores, Elias, Ball, James A. R., Taube, Alex and Siu, Fred. 2003. "Lap shear strength comparison between different random glass fibre reinforced thermoplastic matrix composites bonded by adhesives using variable frequency microwaves (VFM) irradiation." Proceedings of the Institution of Mechanical Engineers Part L: Journal of Materials, Design and Applications. 217 (1), pp. 65-75.
Joining of thirty three percent by weight random carbon fibre reinforced low density polyethylene using variable frequency microwave
Ku, Harry S.. 2003. "Joining of thirty three percent by weight random carbon fibre reinforced low density polyethylene using variable frequency microwave ." Journal of The Institution of Engineers, Singapore. 43 (1), pp. 20-25.
Thermal analysis of joining Nylon 66 composites using microwave irradiations
Ku, Harry S., Widjaya, Budiman, Lee, Kin Fung and Li, Chun Wai. 2003. "Thermal analysis of joining Nylon 66 composites using microwave irradiations." Transactions of the Canadian Society for Mechanical Engineering. 27 (3), pp. 259-278.
Shrinkage reduction of thermoset matrix particle reinforced composites during curing using microwaves irradiation
Ku, Harry S. and Siores, Elias. 2004. "Shrinkage reduction of thermoset matrix particle reinforced composites during curing using microwaves irradiation." Transactions, Hong Kong Institution of Engineers. 11 (3), pp. 29-34.
Productivity improvement of composites processing through the use of industrial microwave technologies
Ku, Harry S.. 2006. "Productivity improvement of composites processing through the use of industrial microwave technologies." Progress in Electromagnetics Research (PIER). 66, pp. 267-285. https://doi.org/10.2528/PIER06111901
Young's modulus of vinyl ester composites cured by microwave irradiation: preliminary results
Ku, Harry S., Puttgunta, V. C. and Trada, Mohan. 2006. "Young's modulus of vinyl ester composites cured by microwave irradiation: preliminary results." Journal of Electromagnetic Waves and Applications. 20 (14), pp. 1911-1924. https://doi.org/10.1163/156939306779322675
The effects of load and velocity on friction and interface temperature of CGRP sliding against smooth stainless steel
Yousif, B. F., El-Tayeb, N. S. M. and Yusaf, Talal. 2006. "The effects of load and velocity on friction and interface temperature of CGRP sliding against smooth stainless steel." Zannetti, Luca (ed.) 8th Biennial ASME Conference on Engineering Systems Design and Analysis (ESDA 2006). Torino, Italy 04 - 07 Jul 2006 Italy.
Mechanical properties of vinyl ester composites cured by microwave irradiation: pilot study
Ku, H., Trada, M. and Puttgunta, V. C.. 2007. "Mechanical properties of vinyl ester composites cured by microwave irradiation: pilot study." Key Engineering Materials. 334-33, pp. 537-540. https://doi.org/10.4028/www.scientific.net/KEM.334-335.537
Yield and tensile strength of vinyl ester composites cured by microwaves
Ku, H., Trada, M., Puttgunta, V. C. and Kota, V.. 2007. "Yield and tensile strength of vinyl ester composites cured by microwaves ." Journal of Electromagnetic Waves and Applications. 21 (4), pp. 517-526. https://doi.org/10.1163/156939307780616847
Design of multi-purpose carbide end mill
Ku, Harry S. and Chia, Wee Chong. 2006. "Design of multi-purpose carbide end mill." Institution of Engineers, Malaysia. Journal. 67 (2), pp. 34-40.
Thermal analysis comparison between three random glass fibre-reinforced thermoplastic matrix composites bonded by adhesives using microwaves
Ku, Harry S., Widjaya, Budiman, Lee, Kin Fung and Li, Chun Wai. 2004. "Thermal analysis comparison between three random glass fibre-reinforced thermoplastic matrix composites bonded by adhesives using microwaves ." Journal of Reinforced Plastics and Composites. 23 (3), pp. 1443-1460.
Contrast joints of glass-fibre with carbon-fibre reinforced low density polyethylene composite bonded by microwave irradiation
Ku, Harry S.. 2005. "Contrast joints of glass-fibre with carbon-fibre reinforced low density polyethylene composite bonded by microwave irradiation." Journal of Reinforced Plastics and Composites. 24 (10), pp. 1035-1049. https://doi.org/10.1177/0731684405048203
Application of variable frequency microwave (VFM) to adhesives
Ku, Harry S., Siores, Elias and Ball, James A. R.. 2005. "Application of variable frequency microwave (VFM) to adhesives." Journal of Electromagnetic Waves and Applications. 19 (11), pp. 1467-1484.