Development and validation of a thorax surrogate FE model for assessment of trauma due to high speed blunt impacts

Article


Thota, Narasimha, Epaarachchi, Jayantha and Lau, Kin-Tak. 2014. "Development and validation of a thorax surrogate FE model for assessment of trauma due to high speed blunt impacts." Journal of Biomechanical Science and Engineering. 9 (1), pp. 08-1. https://doi.org/10.1299/jbse.2014jbse0008
Article Title

Development and validation of a thorax surrogate FE model for assessment of trauma due to high speed blunt impacts

ERA Journal ID210805
Article CategoryArticle
AuthorsThota, Narasimha, Epaarachchi, Jayantha and Lau, Kin-Tak
Journal TitleJournal of Biomechanical Science and Engineering
Journal Citation9 (1), pp. 08-1
Number of Pages22
Year2014
Place of PublicationJapan
ISSN1880-9863
Digital Object Identifier (DOI)https://doi.org/10.1299/jbse.2014jbse0008
Web Address (URL)https://www.jstage.jst.go.jp/article/jbse/9/1/9_2014jbse0008/_pdf
Abstract

Without being able to evaluate blunt thoracic trauma in terms of an acceptable injury criterion, it is not possible
to develop or validate non-lethal projectiles, bullet proof vests and chest protectors for sports personnel etc.
In order for the assessment of the blunt trauma caused by high speed projectiles, a novel design of a
mechanical surrogate of the thorax (Mechanical THOrax for Trauma Assessment: MTHOTA) was conceptualized. An iterative impact analyses in the virtual testing environment were carried out by impacting the finite element model of the mechanical thorax with 37 mm diameter, 100 mm long wooden baton weighing 140 grams (20 m/s and 40 m/s impact speeds) and 37 mm diameter, 28.5 mm long wooden baton weighing 30
grams with 60 m/s impact speed. From the output of every simulation, force dynamic response (force-time), deflection dynamic response (deflection-time) and force-deflection response were elicited and compared with the corresponding human response corridors developed by Wayne State University’s researchers. By suitably changing the design parameters of the mechanical surrogate, simulation iterations were continued till the responses were correlated with the human response corridors. Values of viscous criterion (VCmax), product of
maximum chest deflection and the rate at which chest deforms, obtained from MTHOTA were in very good agreement with those obtained from the cadaveric test data. The methodology, concept and validation of the
MTHOTA have been presented in this paper.

Keywordsblunt thoracic trauma, surrogate, viscous injury, sports injury, viscous criterion, chest protective equipment, less-lethal ammunition, MTHOTA, 3-RCS
ANZSRC Field of Research 2020400303. Biomechanical engineering
401006. Systems engineering
Public Notes

Published version made available according to copyright transfer form for authors. Copyright: Japan Society of Mechanical Engineers

A license for reproduction and distribution of this paper will be granted to the Author by the JSME provided a copyright notice is included in each copy.

Byline AffiliationsCentre of Excellence in Engineered Fibre Composites
Institution of OriginUniversity of Southern Queensland
Permalink -

https://research.usq.edu.au/item/q26q3/development-and-validation-of-a-thorax-surrogate-fe-model-for-assessment-of-trauma-due-to-high-speed-blunt-impacts

Download files


Published Version
  • 1794
    total views
  • 273
    total downloads
  • 3
    views this month
  • 0
    downloads this month

Export as

Related outputs

Enhanced electromechanical performance of structural supercapacitor composites with high loading of graphene nanoplatelet at the fibre/matrix interface
Anurangi, Jayani, Jeewantha, Janitha, Herath, Madhubhashitha, Galhena, Dona T.L. and Epaarachchi, Jayantha. 2024. "Enhanced electromechanical performance of structural supercapacitor composites with high loading of graphene nanoplatelet at the fibre/matrix interface." Composites Part A: Applied Science and Manufacturing. 190. https://doi.org/10.1016/j.compositesa.2024.108617
Formulation of Epoxy Prepregs, Synthesization Parameters, and Resin Impregnation Approaches—A Comprehensive Review
Epaarachchi, Jayantha, Somarathna, Yashoda, Herath, Madhubhashitha and Islam, Md Mainul. 2024. "Formulation of Epoxy Prepregs, Synthesization Parameters, and Resin Impregnation Approaches—A Comprehensive Review ." Polymers. 16 (23). https://doi.org/10.3390/polym16233326
Optimising nanoparticle dispersion time for enhanced thermomechanical properties in DGEBA-based shape memory polymer composites
Jeewantha, Janitha, Epaarachchi, Jayantha and Islam, Md Mainul. 2024. "Optimising nanoparticle dispersion time for enhanced thermomechanical properties in DGEBA-based shape memory polymer composites." Journal of Research Updates in Polymer Science. 13, pp. 147-150.
Burden turns into benefit: Potentiality of macadamia nutshells for engineered polymer composites
Islam, Md Mainul, Khan, Md Sefat and Epaarachchi, Jayantha. 2024. "Burden turns into benefit: Potentiality of macadamia nutshells for engineered polymer composites." International Journal of Management and Applied Science (IJMAS). 10 (1), pp. 169-179.
Air thermal management platform assessment in centralized and decentralized air-conditioning systems
Salman, Ahmed Saadallah, Abdulkarim, Ali Hussein, Ali, Qays A., Ayad, Kakei A., Koca, Aliihsan, Epaarachchi, Jayantha and Dalkilic, Ahmet Selim. 2024. "Air thermal management platform assessment in centralized and decentralized air-conditioning systems." Journal of Thermal Analysis and Calorimetry: an international forum for thermal studies. https://doi.org/10.1007/s10973-024-13546-1
Distributed Optical Fibre-Based Pore Water Pressure Sensor for Early Warning of Geohazards
Anjana, Kusumi, Herath, Madhubhashitha, Epaarachchi, Jayantha and Priyankara, Nadeej. 2024. "Distributed Optical Fibre-Based Pore Water Pressure Sensor for Early Warning of Geohazards." 5th International Conference on Geotechnics for Sustainable Infrastructure Development (GEOTEC 2023). Hanoi, Vietnam 14 - 15 Dec 2023 Singapore. Springer. https://doi.org/10.1007/978-981-99-9722-0_132
Effect of atomic oxygen and vacuum thermal aging on graphene and glass fibre reinforced cyanate ester-based shape memory polymer composite for deployable thin wall structures
Epaarachchi, Jayantha, Jayalath, Sandaruwan, Trifoni, Eduardo, Herath, Madhubhashitha, Gdoutos, Eleftherios E. and Samarasekara, Bandu. 2024. "Effect of atomic oxygen and vacuum thermal aging on graphene and glass fibre reinforced cyanate ester-based shape memory polymer composite for deployable thin wall structures." Composites Science and Technology. 258. https://doi.org/10.1016/j.compscitech.2024.110870
Electrochemical and structural performances of carbon and glass fiber-reinforced structural supercapacitor composite at elevated temperatures
Anurangi, Jayani, Herath, Madhubhashitha, Galhena, Dona T L and Epaarachchi, Jayantha. 2024. "Electrochemical and structural performances of carbon and glass fiber-reinforced structural supercapacitor composite at elevated temperatures." Functional Composites and Structures. 6 (3). https://doi.org/10.1088/2631-6331/ad5e32
Cyanate ester and polyethylene glycol based high temperature resistant shape memory polymer development for space applications
Jayalath, Sandaruwan, Herath, Madhubhashitha, Epaarachchi, Jayantha, Trifoni, Eduardo, Gdoutos, Eleftherios E. and Samarasekara, Bandu. 2024. "Cyanate ester and polyethylene glycol based high temperature resistant shape memory polymer development for space applications." Reactive and Functional Polymers. 201. https://doi.org/10.1016/j.reactfunctpolym.2024.105949
Acrylonitrile Butadiene Styrene (ABS) membrane for Air Filtration
Samarathunga, Imesha R, Epaarachchi, Jayantha, Sethunga, G S M D P and Herath, Madhubhashitha. 2024. "Acrylonitrile Butadiene Styrene (ABS) membrane for Air Filtration." 11th Australasian Congress on Applied Mechanics (ACAM2024). Brisbane, Australia 07 - 09 Feb 2024 Australia.
Lay-up configuration of glass fibre on cyanate ester based shape memory polymer composites
Jayalath, Sandaruwan, Epaarachchi, Jayantha and Herath, Madhubhashitha. 2024. "Lay-up configuration of glass fibre on cyanate ester based shape memory polymer composites." 11th Australasian Congress on Applied Mechanics (ACAM2024). Brisbane, Australia 07 - 09 Feb 2024 Australia.
Carbon Fibre Reinforced Bishphenol A Epoxy Composite Structures with Energy Storage Capability
Anurangi, Jayani, Herath, Madhubhashitha and Epaarachchi, Jayantha. 2024. "Carbon Fibre Reinforced Bishphenol A Epoxy Composite Structures with Energy Storage Capability." 11th Australasian Congress on Applied Mechanics (ACAM2024). Brisbane, Australia 07 - 09 Feb 2024 Australia.
Optical fibre sensors for geohazard monitoring – A review
Anjana, Kusumi, Herath, Madhubhashitha and Epaarachchi, Jayantha. 2024. "Optical fibre sensors for geohazard monitoring – A review." Measurement. 235. https://doi.org/10.1016/j.measurement.2024.114846
Enhanced thermo-mechanical properties of carbon fiber reinforced thermoresistant polymer, a blend of di-functional epoxy bisphenol A and a tri-functional epoxy Tactix 742
Anurangi, Jayani, Jayalath, Sandaruwan, Senevirathna, Sandhya Rani, Herath, Madhubhashitha and Epaarachchi, Jayantha. 2024. "Enhanced thermo-mechanical properties of carbon fiber reinforced thermoresistant polymer, a blend of di-functional epoxy bisphenol A and a tri-functional epoxy Tactix 742." Polymer Composites. 45 (12), pp. 10898-10910. https://doi.org/10.1002/pc.28517
Computer-aided feature recognition of CFRP plates based on real-time strain fields reflected from FBG measured signals
Wang, Hua-Ping, Ni, Yi-Qing, Chen, Cong, Jayawickrema, Minol and Epaarachchi, Jayantha. 2023. "Computer-aided feature recognition of CFRP plates based on real-time strain fields reflected from FBG measured signals." Composites Part B: Engineering. 263. https://doi.org/10.1016/j.compositesb.2023.110866
Optical Fibre Sensing and Deep Learning-Based Disaster and Climate Change Risk Assessments of Civil Infrastructure: Current Status and Future Perspective
Anjana, R. W. K., Herath, H. M. C., Jayawickrema, U. M. N. and Epaarachchi, J. A.. 2023. "Optical Fibre Sensing and Deep Learning-Based Disaster and Climate Change Risk Assessments of Civil Infrastructure: Current Status and Future Perspective." 13th International Conference on Sustainable Built Environment. Kandy, Sri Lanka 16 - 18 Dec 2022 Singapore . Springer. https://doi.org/10.1007/978-981-99-3471-3_33
Development of exfoliated mica waste/natural rubber composites by latex stage mixing
Somarathna, Y.R., Rathnayake, G.L.H., Rupasinghe, P.S.V., Samarasinghe, I.H.K., Sudusingha, Y.C.Y., Siriwardena, S. and Epaarachchi, J.A.. 2023. "Development of exfoliated mica waste/natural rubber composites by latex stage mixing." Polymer-Plastics Technology and Materials. 62 (16), pp. 2143-2158. https://doi.org/10.1080/25740881.2023.2252894
Overview of emerging hybrid and composite materials for space applications
Ince, J.C., Peerzada, M., Mathews, L.D., Pai, A.R., Al‑qatatsheh, A., Abbasi, S., Yin, Y., Hameed, N., Duffy, A.R., Lau, K. and Salim, N.V.. 2023. "Overview of emerging hybrid and composite materials for space applications." Advanced Composites and Hybrid Materials. 6 (4). https://doi.org/10.1007/s42114-023-00678-5
Light and Shape-Memory Polymers: Characterization, Preparation, Stimulation, and Application
Fang, Liang, Yan, Wan, Chen, Shunping, Duan, Qiong, Herath, Madhubhashitha, Epaarachchi, Jayantha, Liu, Yue and Lu, Chunhua. 2023. "Light and Shape-Memory Polymers: Characterization, Preparation, Stimulation, and Application." Macromolecular Materials and Engineering. 308 (12). https://doi.org/10.1002/mame.202300158
Exploring the Prospects of Macadamia Nutshells for Bio-Synthetic Polymer Composites: A Review
Khan, Md Sefat, Islam, Md Mainul, Epaarachchi, Jayantha and Shibata, Shinichi. 2023. "Exploring the Prospects of Macadamia Nutshells for Bio-Synthetic Polymer Composites: A Review." Polymers. 2023 (15). https://doi.org/10.3390/polym15194007
Impact of Spectral Shift Quality (SSQ) on Fibre Optic Sensor Readings in Reinforced Concrete Beams
Udagedara, U. M. N., Herath, H. M. C. M., Henarachchi, N. K., Sooriyaarachchi, H. P., Banerjee, S. and Epaarachchi, J. A.. 2023. "Impact of Spectral Shift Quality (SSQ) on Fibre Optic Sensor Readings in Reinforced Concrete Beams." 14th International Workshop on Structural Health Monitoring. Stanford University, Stanford, CA 12 - 14 Sep 2023 United States. DEStech Publications, Inc.
Sensory methods and machine learning based damage identification of fibre-reinforced composite structures: An introductory review
Bandara, Senaka, Herath, Madhubhashitha and Epaarachchi, Jayantha. 2023. "Sensory methods and machine learning based damage identification of fibre-reinforced composite structures: An introductory review." Journal of Reinforced Plastics and Composites. 42 (21-22), pp. 1119-1146. https://doi.org/10.1177/07316844221145972
Shape memory polymer composite circular and square hollow members for deployable structures
Emmanuel, K.D.C., Jeewantha, L.H.J., Herath, H.M.C.M., Epaarachchi, J.A. and Aravinthan, T.. 2023. "Shape memory polymer composite circular and square hollow members for deployable structures ." Composites Part A: Applied Science and Manufacturing. 171. https://doi.org/10.1016/j.compositesa.2023.107559
Durability and long-term behaviour of shape memory polymers and composites for the space industry - A review of current status and future perspectives
Jayalath, Sandaruwan, Herath, Madhubhashitha, Epaarachchi, Jayantha, Trifoni, Eduardo, Gdoutos, Eleftherios E. and Fang, Liang. 2023. "Durability and long-term behaviour of shape memory polymers and composites for the space industry - A review of current status and future perspectives ." Polymer Degradation and Stability. 211. https://doi.org/10.1016/j.polymdegradstab.2023.110297
The use of fibre reinforced polymer composites for construction of structural supercapacitors: a review
Anurangi, Jayani, Herath, Madhubhashitha, Galhena, Dona T.L. and Epaarachchi, Jayantha. 2023. "The use of fibre reinforced polymer composites for construction of structural supercapacitors: a review ." Advanced Composite Materials. 32 (6), pp. 942-986. https://doi.org/10.1080/09243046.2023.2180792
Strain patterns of short span reinforced concrete beams under flexural loading: A comparison between distributed sensing and concrete damaged plasticity modelling
Udagedara, Minol, Kumar, Arjun, Herath, Madhubhashitha, Hettiarachchi, Nandita, Sooriyaarachchi, Harsha and Epaarachchi, Jayantha. 2023. "Strain patterns of short span reinforced concrete beams under flexural loading: A comparison between distributed sensing and concrete damaged plasticity modelling." Journal of Intelligent Material Systems and Structures. 34 (10), p. 1123–1135. https://doi.org/10.1177/1045389X221128764
Damage onset analysis of optimized shape memory polymer composites during programming into curved shapes
Emmanuel, K. D. C., Jeewantha, L. H. J., Herath, H. M. C. M., Epaarachchi, J. A. and Aravinthan, T.. 2022. "Damage onset analysis of optimized shape memory polymer composites during programming into curved shapes." Materialia. 26, pp. 1-11. https://doi.org/10.1016/j.mtla.2022.101599
Fibre-optic sensor and deep learning-based structural health monitoring systems for civil structures: A review
Jayawickrema, U. M. N., Herath, H. M. C. M., Hettiarachchi, N. K., Sooriyaarachchi, H. P. and Epaarachchi, J. A.. 2022. "Fibre-optic sensor and deep learning-based structural health monitoring systems for civil structures: A review." Measurement. 199, pp. 1-31. https://doi.org/10.1016/j.measurement.2022.111543
Shape memory polymer smart plaster for orthopaedic treatments
Jeewantha, Janitha, Jayalath, Sandaruwan, Emmanuel, Chris, Herath, Madhubhashitha, Forster, Elizabeth, Islam, Mainul, Leng, Jinsong and Epaarachchi, Jayantha. 2022. "Shape memory polymer smart plaster for orthopaedic treatments." Smart Materials and Structures. 31 (11), pp. 1-14. https://doi.org/10.1088/1361-665X/ac943b
Early research of shape memory polymer vascular stents
Jeewantha, Lama Hewage Janitha, Epaarachchi, Jayantha Ananda, Forster, Elizabeth, Islam, Mainul and Leng, Jinsong. 2022. "Early research of shape memory polymer vascular stents." Express Polymer Letters. 16 (9), pp. 902-923. https://doi.org/10.3144/expresspolymlett.2023.49
Distributed sensing based real-time process monitoring of shape memory polymer components
Herath, Madhubhashitha, Emmanuel, Chris, Jeewantha, Janitha, Epaarachchi, Jayantha and Leng, Jinsong. 2022. "Distributed sensing based real-time process monitoring of shape memory polymer components." Journal of Applied Polymer Science. 139 (22). https://doi.org/10.1002/app.52247
Investigation of curing kinetics and internal strains to enhance performances of bisphenol A based shape memory polymers
Jeewantha, L. H. J., Emmanuel, K. D. C., Herath, H. M. C. M., Epaarachchi, J. A., Islam, M. M. and Leng, J.. 2022. "Investigation of curing kinetics and internal strains to enhance performances of bisphenol A based shape memory polymers." Materialia. 21. https://doi.org/10.1016/j.mtla.2021.101264
Surface-Mounted Distributed Fiber Optic Sensor Measurements, and Concrete Damaged Plasticity Modeling for Damage Analysis of Reinforced Concrete Beams
Jayawickrema, U. M. N., Kumar, A. S., Herath, H. M. C. M., Hettiarachchi, N. K., Sooriyaarachchi, H. P. and Epaarachchi, J. A.. 2021. "Surface-Mounted Distributed Fiber Optic Sensor Measurements, and Concrete Damaged Plasticity Modeling for Damage Analysis of Reinforced Concrete Beams." ASME 2021 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS2021). United States and Online United States. https://doi.org/10.1115/SMASIS2021-67524
In-situ performance evaluation of large shape memory polymer components via distributed optical fibre sensors
Herath, Madhubhashitha, Emmanuel, Chris, Epaarachchi, Jayantha and Jeewantha, Janitha. 2021. "In-situ performance evaluation of large shape memory polymer components via distributed optical fibre sensors." 10th International Conference on Information and Automation for Sustainability (ICIAfS 2021). Negambo, Sri Lanka 11 - 13 Aug 2021 United States. https://doi.org/10.1109/ICIAfS52090.2021.9605868
Development and characterization of shape memory polymers for non-invasive biomedical applications
Jeewantha, Janitha, Emmanuel, Chris, Herath, Madhubhashitha, Islam, Mainul and Epaarachchi, Jayantha. 2021. "Development and characterization of shape memory polymers for non-invasive biomedical applications." ASME 2021 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS2021). United States and Online New York, United States. https://doi.org/10.1115/SMASIS2021-66024
Shape memory polymer composites and their smart structural applications
Herath, Madhubhashitha and Epaarachchi, Jayantha. 2021. "Shape memory polymer composites and their smart structural applications." Low, It-Meng and Dong, Yu (ed.) Composite materials: manufacturing, properties and applications. Netherlands. Elsevier. pp. 581-610
Impact Properties of the Chemically Treated Hemp Fibre Reinforced Polyester Composites
Kabir, Mohammad Mazedul, Al-Haik, Mohammad Yousef, Aldajah, Saud Hamad, Lau, Kin Tak and Wang, Hao. 2020. "Impact Properties of the Chemically Treated Hemp Fibre Reinforced Polyester Composites." Fibers and Polymers. 21 (9), pp. 2098-2110. https://doi.org/10.1007/s12221-020-9630-4
Fabric Parameter Effect on the Mechanical Properties of Woven Hemp Fabric Reinforced Composites as an Alternative to Wood Products
Misnon, I. M., Islam, M. M., Epaarachchi, J. A., Lau, K. T. and Wang, H.. 2016. "Fabric Parameter Effect on the Mechanical Properties of Woven Hemp Fabric Reinforced Composites as an Alternative to Wood Products." Advance Research in Textile Engineering. 1 (1).
Multi-attribute parametric optimisation of shape memory polymer properties for adaptive orthopaedic plasters
Jeewantha, L. H. J., Emmanuel, K. D. C., Herath, H. M. C. M., Islam, M. M., Fang, L. and Epaarachchi, J. A.. 2022. "Multi-attribute parametric optimisation of shape memory polymer properties for adaptive orthopaedic plasters." Materialia. 21, pp. 1-12. https://doi.org/10.1016/j.mtla.2022.101325
Effect of hemp fibre surface treatment on the fibre-matrix interface and the influence of cellulose, hemicellulose and lignin contents on composite strength properties
Kabir, Mohammad Mazedul, Alhaik, Mohammad Yousef, Aldajah, Saud Hamad, Lau, Kin Tak, Wang, Hao and Islam, Md Mainul. 2021. "Effect of hemp fibre surface treatment on the fibre-matrix interface and the influence of cellulose, hemicellulose and lignin contents on composite strength properties." Advances in Materials Science and Engineering. 2021, pp. 1-17. https://doi.org/10.1155/2021/9753779
Numerical Study of an Improved Non-Circular MC Fuelled with H/Air for Thermo-Photovoltaic (TPV) Applications
Ayad, Kakei A., Khdher, Abdolbaqi Mohammed, Albazzaz, Kamal Jalal Tawfeeq, Kakahy, Amer Najat Najmaldeen, Abdulkarim, Ali Hussein and Epaarachchi, Jayantha. 2022. "Numerical Study of an Improved Non-Circular MC Fuelled with H/Air for Thermo-Photovoltaic (TPV) Applications." Mathematical Modelling of Engineering Problems. 9 (4), pp. 897-905. https://doi.org/10.18280/mmep.090406
Cyanate esters as a high performing shape memory polymer: A review
Jayalath, H.T.S., Herath, Madhubhashitha and Epaarachchi, Jayantha. 2022. "Cyanate esters as a high performing shape memory polymer: A review." 3rd International Conference on Aspects of Materials Science and Engineering (ICAMSE2022). Chandigarh, India 04 - 05 Mar 2022 Netherlands. Elsevier. https://doi.org/10.1016/j.matpr.2022.02.121
Effects of Ligands in Rare Earth Complex on Properties, Functions, and Intelligent Behaviors of Polyurea–Urethane Composites
Zhou, Lu, Yang, Hongwei, Zhang, Zhen, Liu, Yue, Epaarachchi, Jayantha, Fang, Zhenggang, Fang, Liang, Lu, Chunhua and Xu, Zhongzi. 2022. "Effects of Ligands in Rare Earth Complex on Properties, Functions, and Intelligent Behaviors of Polyurea–Urethane Composites." Polymer. 14 (10), pp. 1-16. https://doi.org//10.3390/polym14102098
Evaluating the temperature and glass fibre reinforcement effects on the damping properties of the shape memory polymers
Al Azzawi, Wessam, Epaarachchi, Jayantha A. and Leng, Jinsong. 2017. "Evaluating the temperature and glass fibre reinforcement effects on the damping properties of the shape memory polymers." 21st International Conference on Composite Materials (ICCM-21). Xi’an, China 20 - 25 Aug 2017 China.
Carbon fibre reinforced shape memory polymer composites for deployable space habitats
Herath, H. M. C. M., Epaarachchi, J. A., Islam, M. M. and Leng, J.. 2019. "Carbon fibre reinforced shape memory polymer composites for deployable space habitats." Engineer: Journal of the Institution of Engineers. LII (1), pp. 1-9. https://doi.org/10.4038/engineer.v52i1.7323
Thermomechanical and fire performance of DGEBA based shape memory polymer composites for constructions
Emmanuel, K. D. C., Herath, H. M. C. M., Jeewantha, L. H. J., Epaarachchi, J. A. and Aravinthan, T.. 2021. "Thermomechanical and fire performance of DGEBA based shape memory polymer composites for constructions." Construction and Building Materials. 303. https://doi.org/10.1016/j.conbuildmat.2021.124442
Development of Smart Materials for Invasive Medical Applications Using Shape Memory Polymers
Jeewantha, Lama Hewage Janitha, Islam, Md Mainul and Epaarachchi, Jayantha Ananda. 2020. "Development of Smart Materials for Invasive Medical Applications Using Shape Memory Polymers." 6th International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE 2020). Khulna, Bangladesh 19 - 21 Dec 2020 Bangladesh.
Monitoring Structural Performances of Concrete Beams Using Fibre Bragg Grating (FBG) Sensors
Jayawickrema, U. M. N., Epaarachchi, J. A., Hettiarachchi, N. K., Jeewantha, L. H. J. and Herath, H. M. C. M.. 2019. "Monitoring Structural Performances of Concrete Beams Using Fibre Bragg Grating (FBG) Sensors." 10th International Conference on Structural Engineering and Construction Management (ICSECM 2019). Kandy, Sri Lanka 12 - 14 Dec 2019
Flexural Analysis for Syntactic Foam Sandwich Panels
Salleh, Zulzamri, Islam, M., Epaarachchi, J., Zulkarnain, M. and Ahmed, Yaseen Adenan. 2020. "Flexural Analysis for Syntactic Foam Sandwich Panels." Saw, Chun Lin, Woo, Tze Keong, Singh, Salvinder Singh a/l Karam and Salim, Didi Asmara Bin (ed.) Regional Conference on Marine and Mechanical Engineering (ReMME'18). Ipoh, Malaysia 07 - 09 Nov 2018 Singapore. https://doi.org/10.1007/978-981-15-0002-2_5
Behaviour of continuous fibre composite sandwich core under low-velocity impact
Zangana, Sartip, Epaarachchi, Jayantha, Ferdous, Wahid, Leng, Jinsong and Schubel, Peter. 2021. "Behaviour of continuous fibre composite sandwich core under low-velocity impact." Thin-Walled Structures. 158, pp. 1-11. https://doi.org/10.1016/j.tws.2020.107157
Europium complex with functionalized carbon nanotubes: a new lanthanide photoluminescence nanomaterial
Li, Xiao-Feng, An, Yan, Lau, Kin-Tak, Li, Wen-Ge and Yin, Yan-Sheng. 2012. "Europium complex with functionalized carbon nanotubes: a new lanthanide photoluminescence nanomaterial." Lau, Alan K.-T., Srivatsan, T. S., Bhattacharyya, Debes, Zhang, Ming Qiu and Ho, Mabel M. P. (ed.) 20th International Symposium on Processing and Fabrication of Advanced Materials (PFAM 20). Hong Kong 15 - 18 Dec 2011 Zurich, Switzerland. https://doi.org/10.4028/www.scientific.net/AMR.410.129
Interfacial bonding in a nanoclay/polymer composite
Chan, Mo-lin, Lau, Kin-Tak and Wong, T. T.. 2012. "Interfacial bonding in a nanoclay/polymer composite." Lau, Alan K.-T., Srivatsan, T. S., Bhattacharyya, Debes, Zhang, Ming Qiu and Ho, Mabel M. P. (ed.) 20th International Symposium on Processing and Fabrication of Advanced Materials (PFAM 20). Hong Kong 15 - 18 Dec 2011 Zurich, Switzerland. https://doi.org/10.4028/www.scientific.net/AMR.410.156
Effect of thickness on the shape memory properties of bisphenol a epoxy based shape memory polymer composites
Emmanue, K. D. C., Jeewantha, J., Herath, M., Epaarachchi J. and Aravinthan T.. 2021. "Effect of thickness on the shape memory properties of bisphenol a epoxy based shape memory polymer composites." ASME 2021 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS2021). United States and Online United States. https://doi.org/10.1115/SMASIS2021-67111
Recent Progress in Shape Memory Polymers in Biomedical Applications
Jeewantha, Lama Hewage Janitha, Islam, Md Mainul and Epaarachchi, Jayantha Amanda. 2019. "Recent Progress in Shape Memory Polymers in Biomedical Applications." Yang, Richard, Zhang, Leo, Zhao, Ming, Fang, Gu and Islam, Rafiqul (ed.) 1st International Conference on Mechanical and Manufacturing Engineering Research and Practice (iCMMERP-2019). Sydney, Australia 24 - 28 Nov 2019 Sydney, Australia.
Light activated shape memory polymers and composites: A review
Herath, Madhubhashitha, Epaarachchi, Jayantha, Islam, Mainul, Fang, Liang and Leng, Jinsong. 2020. "Light activated shape memory polymers and composites: A review." European Polymer Journal. 136, pp. 1-27. https://doi.org/10.1016/j.eurpolymj.2020.109912
Performance of rare earth organic complexes based light activated shape memory polymer composites
Herath, Madhubhashitha, Epaarachchi, Jayantha, Islam, Mainul, Fang, Liang, Zhang, Fenghua and Leng, Jinsong. 2019. "Performance of rare earth organic complexes based light activated shape memory polymer composites." 22nd International Conference on Composite Materials (ICCM-22). Melbourne, Australia 11 - 16 Aug 2019 Australia.
Remote actuation of light activated shape memory polymers via D-shaped optical fibres
Herath, Madhubhashitha, Epaarachchi, Jayantha, Islam, Mainul, Zhang, Fenghua, Leng, Jinsong, Fang, Liang, Yan, Cheng, Peng, Gang Ding and Schade, Wolfgang. 2020. "Remote actuation of light activated shape memory polymers via D-shaped optical fibres." Smart Materials and Structures. 29 (4), pp. 1-8. https://doi.org/10.1088/1361-665X/ab72ea
4D printed shape memory polymer composite structures for deployable small spacecrafts
Herath, Madhubhashitha, Islam, Mainul, Epaarachchi, Jayantha, Zhang, Fenghua and Leng, Jinsong. 2019. "4D printed shape memory polymer composite structures for deployable small spacecrafts." ASME 2019 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS 2019). Louisville, United States 09 - 11 Sep 2019 United States. https://doi.org/10.1115/SMASIS2019-5583
Mechanical properties and thermomechanical behaviour of poly (ethylene-co-vinyl acetate) based shape memory polymer composites
Herath, M., James, G. and Epaarachchi, J.. 2019. "Mechanical properties and thermomechanical behaviour of poly (ethylene-co-vinyl acetate) based shape memory polymer composites." 13th International Conference on the Mechanical Behaviour of Materials (ICM13). Melbourne, Australia 11 - 14 Jun 2019 Melbourne, Australia.
A novel hybridised composite sandwich core with glass, kevlar and zylon fibres – investigation under low-velocity impact
Zanagan, Sartip, Epaarachchi, Jayantha, Ferdous, Wahid and Leng, Jinsong. 2020. "A novel hybridised composite sandwich core with glass, kevlar and zylon fibres – investigation under low-velocity impact." International Journal of Impact Engineering. 137, pp. 1-10. https://doi.org/10.1016/j.ijimpeng.2019.103430
Near infrared light activated shape memory polymer composite for space applications
Herath, Madhubhashitha, Epaarachchi, Jayantha, Islam, Mainul and Leng, Jinsong. 2018. "Near infrared light activated shape memory polymer composite for space applications." Wang, Hao (ed.) 11th Asian-Australasian Conference on Composite Materials (ACCM-11). Cairns, Australia 29 Jul - 01 Aug 2018
Light-induced rare earth organic complex/shape-memory polymer composites with high strength and luminescence based on hydrogen bonding
Wang, Hangning, Fang, Liang, Zhang, Zhen, Epaarachchi, Jayantha, Li, Lingyu, Hu, Xin, Lu, Chunhua and Xu, Zhongzi. 2019. "Light-induced rare earth organic complex/shape-memory polymer composites with high strength and luminescence based on hydrogen bonding." Composites Part A: Applied Science and Manufacturing. 125, pp. 1-9. https://doi.org/10.1016/j.compositesa.2019.105525
Effects of selectively triggered photothermal particles on shape memory polymer composites: an investigation on structural performance, thermomechanical characteristics and photothermal behaviour
Herath, Madhubhashitha, Epaarachchi, Jayantha, Islam, Mainul, Yan, Cheng, Zhang, Fenghua and Leng, Jinsong. 2019. "Effects of selectively triggered photothermal particles on shape memory polymer composites: an investigation on structural performance, thermomechanical characteristics and photothermal behaviour." Journal of Intelligent Material Systems and Structures. 30 (20), pp. 3124-3135. https://doi.org/10.1177/1045389X19879998
Modeling, analysis, and testing of viscoelastic properties of shape memory polymer composites and a brief review of their space engineering applications
Al Azzawi, Wessam, Herath, Madhubhashitha and Epaarachchi, Jayantha. 2019. "Modeling, analysis, and testing of viscoelastic properties of shape memory polymer composites and a brief review of their space engineering applications." Guedes, Rui Miranda (ed.) Creep and fatigue in polymer matrix composites. United Kingdom. Woodhead Publishing Limited. pp. 465-495
Thermo-mechanical properties of fused borosilicate syntactic foams
Salleh, Z., Islam, M. M., Epaarachchi, J. A. and Khan, M. T. I.. 2019. "Thermo-mechanical properties of fused borosilicate syntactic foams." Journal of Mechanical Engineering and Sciences. 13 (2), pp. 4898-4910. https://doi.org/10.15282/jmes.13.2.2019.10.0407
An investigation on the student performance in first year fundamental engineering course, Engineering Statics
Islam, Md Mainul and Epaarachchi, Jayantha Ananda. 2018. "An investigation on the student performance in first year fundamental engineering course, Engineering Statics." Educational Research Applications. 2018 (01), pp. 1-5. https://doi.org/10.29011/2575-7032/100044
Thermal expansion properties of fused borosilicate syntactic foams
Salleh, Zulzamri, Islam, Md Mainul and Epaarachchi, Jayantha Ananda. 2018. "Thermal expansion properties of fused borosilicate syntactic foams." Nano Hybrids and Composites. 23, pp. 39-45. https://doi.org/10.4028/www.scientific.net/NHC.23.39
Flammability characteristics of chemical treated woven hemp fabric reinforced vinyl ester composites
Misnon, M. I., Islam, M. M., Epaarachchi, J. A., Chen, H., Goda, K. and Khan, M. T. I.. 2018. "Flammability characteristics of chemical treated woven hemp fabric reinforced vinyl ester composites." Science and Technology of Materials. 30 (3), pp. 174-188. https://doi.org/10.1016/j.stmat.2018.06.001
Investigation of ultraviolet radiation effects on thermomechanical properties and shape memory behaviour of styrene-based shape memory polymers and its composite
Al Azzawi, Wessam, Epaarachchi, J. A. and Leng, Jinsong. 2018. "Investigation of ultraviolet radiation effects on thermomechanical properties and shape memory behaviour of styrene-based shape memory polymers and its composite." Composites Science and Technology. 165, pp. 266-273. https://doi.org/10.1016/j.compscitech.2018.07.001
Investigation of FBG sensor performance in detection of delamination damage in a half-conical shape composite component
Kakei, Ayad, Manuela, Jerry, Srinivasan, Vishwas, Sharda, Arvind, Islam, Mainul and Epaarachchi, Jayantha. 2019. "Investigation of FBG sensor performance in detection of delamination damage in a half-conical shape composite component ." 12th International Workshop on Structural Health Monitoring (IWSHM). United States 10 - 12 Sep 2019 United States. https://doi.org/10.12783/shm2019/32451
Simulation of Tensile Stress Concentration Evaluation using Finite Element Performance
Salleh, Zulzamri, Islam, Md Mainul and Epaarachchi, Jayantha. 2019. "Simulation of Tensile Stress Concentration Evaluation using Finite Element Performance." International Journal of Innovative Technology and Exploring Engineering. 8 (12), pp. 5647-5652. https://doi.org/10.35940/ijitee.L3989.1081219
Structural performance and photothermal recovery of carbon fibre reinforced shape memory polymer
Herath, H. M .C. M., Epaarachchi, J. A., Islam, M. M., Al-Azzawi, W., Leng, J. and Zhang, F.. 2018. "Structural performance and photothermal recovery of carbon fibre reinforced shape memory polymer." Composites Science and Technology. 167, pp. 206-214. https://doi.org/10.1016/j.compscitech.2018.07.042
Thermo-mechanical behaviour and shape memory characteristics of carbon fibre reinforced epoxy
Herath, Madhubhashitha, Al-Azzawi, Wessam, Epaarachchi, Jayantha, Islam, Mainul, Robertson, Scott, Leng, Jinsong and Zhang, F.. 2018. "Thermo-mechanical behaviour and shape memory characteristics of carbon fibre reinforced epoxy." 2018 International Conference on Nanoscience and Nanotechnology (ICONN 2018). Wollongong, Australia 29 Jan - 02 Feb 2018
Flammability characteristics of chemical treated woven hemp fabric
Misnon, Mohd Iqbal, Islam, Md Mainul, Epaarachchi, Jayantha Ananda, Chen, Haizhen, Goda, Koichi and Khan, Md Tawhidul Islam. 2018. "Flammability characteristics of chemical treated woven hemp fabric." Advances in Materials Science and Engineering. 5 (1), pp. 1-20. https://doi.org/10.5121/msej.2018.5101
Effects of water absorption on mechanical properties of glass microballoons/vinyl ester syntactic foams
Salleh, Zulzamri, Islam, Md Mainul, Epaarachchi, Jayantha Ananda and Khan, Md Tawhidul Islam. 2018. "Effects of water absorption on mechanical properties of glass microballoons/vinyl ester syntactic foams." Research and Reviews in Materials Science and Chemistry. 8 (1), pp. 59-119.
Evaluation of delamination crack tip in woven fibre glass reinforced polymer composite using FBG sensor spectra and thermo-elastic response
Kakei, Ayad, Epaarachchi, J. A., Islam, Mainul and Leng, J.. 2018. "Evaluation of delamination crack tip in woven fibre glass reinforced polymer composite using FBG sensor spectra and thermo-elastic response." Measurement. 122, pp. 178-185. https://doi.org/10.1016/j.measurement.2018.03.023
Use of fiber Bragg grating sensors for monitoring delamination damage propagation in glass-fiber reinforced composite structures
Kakei, Ayad and Epaarachchi, Jayantha A.. 2018. "Use of fiber Bragg grating sensors for monitoring delamination damage propagation in glass-fiber reinforced composite structures." Frontiers of Optoelectronics. 11 (1), pp. 60-68. https://doi.org/10.1007/s12200-018-0761-9
Implementation of a finite element analysis procedure for structural analysis of shape memory behaviour of fibre reinforced shape memory polymer composites
Al Azzawi, Wessam, Epaarachchi, J. A., Islam, Mainul and Leng, Jinsong. 2017. "Implementation of a finite element analysis procedure for structural analysis of shape memory behaviour of fibre reinforced shape memory polymer composites." Smart Materials and Structures. 26 (12), pp. 1-13. https://doi.org/10.1088/1361-665X/aa928e
Quantitative and qualitative analyses of mechanical behavior and dimensional stability of styrene-based shape memory composites
Al Azzawi, Wessam, Islam, Mainul M., Leng, Jinsong, Li, Fengfeng and Epaarachchi, Jayantha A.. 2017. "Quantitative and qualitative analyses of mechanical behavior and dimensional stability of styrene-based shape memory composites." Journal of Intelligent Material Systems and Structures. 28 (20), pp. 3115-3126. https://doi.org/10.1177/1045389X17705210
Water exposure, tensile and fatigue properties of treated hemp reinforced vinyl ester composites
Misnon, Mohd Iqbal, Islam, Mainul, Epaarachchi, Jayantha, Affandi, Nor Dalila Nor and Wang, Hao. 2018. "Water exposure, tensile and fatigue properties of treated hemp reinforced vinyl ester composites ." National Symposium on Polymeric Materials 2017 (NSPM 2017). Selangor, Malaysia 21 - 22 Oct 2017 United States . AIP Publishing. https://doi.org/10.1063/1.5047164
Use of an elasto-plastic model and strain measurements of embedded fibre Bragg grating sensors to detect Mode I delamination crack propagation in woven cloth (0/90) composite materials
Kakei, Ayad Arab, Islam, Mainul, Leng, Jingsong and Epaarachchi, Jayantha A.. 2018. "Use of an elasto-plastic model and strain measurements of embedded fibre Bragg grating sensors to detect Mode I delamination crack propagation in woven cloth (0/90) composite materials." Structural Health Monitoring: an international journal. 17 (2), pp. 363-378. https://doi.org/10.1177/1475921717694812
Determination of coefficient thermal expansion of glass microballoon/vinyl ester syntactic foams
Salleh, Zulzamri, Islam, Md Mainul and Epaarachchi, Jayantha Ananda. 2016. "Determination of coefficient thermal expansion of glass microballoon/vinyl ester syntactic foams." 3rd Advanced Materials Conference (AMC 2016): Advanced Materials for Sustainability and Growth. Langkawi, Malaysia 28 - 29 Nov 2016 Malaysia. AIP Publishing. https://doi.org/10.1063/1.5010477
Thermogravimetry analysis on fused borosilicate syntactic foams
Salleh, Zulzamri, Islam, Md Mainul and Epaarachchi, Jayantha Ananda. 2017. "Thermogravimetry analysis on fused borosilicate syntactic foams." 3rd Advanced Materials Conference (AMC 2016): Advanced Materials for Sustainability and Growth. Langkawi, Malaysia 28 - 29 Nov 2016 Kulim, Kedah, Malaysia. AIP Publishing. https://doi.org/10.1063/1.5010542
Analysis of stress concentration factor for tensile characteristics of syntactic foam using finite element method
Salleh, Zulzamri, Islam, Md Mainul and Epaarachchi, Jayantha Ananda. 2017. "Analysis of stress concentration factor for tensile characteristics of syntactic foam using finite element method." Journal of Research Updates in Polymer Science. 6 (1), pp. 21-32. https://doi.org/10.6000/1929-5995.2017.06.01.4
Vinyl ester/glass microballoon syntactic foams with low density
Salleh, Zulzamri, Islam, Md Mainul, Epaarachchi, Jayantha Ananda and Su, Haibin. 2017. "Vinyl ester/glass microballoon syntactic foams with low density." International Research Journal of Materials Sciences and Applications. 2017 (1), pp. 1-25.
Durability characteristics and property prediction of glass fibre reinforced mixed plastics composites
Bajracharya, Rohan Muni, Manalo, Allan C., Karunasena, Warna and Lau, Kin-tak. 2017. "Durability characteristics and property prediction of glass fibre reinforced mixed plastics composites." Composites Part B: Engineering. 116, pp. 16-29. https://doi.org/10.1016/j.compositesb.2017.02.027
Investigation of the impact properties of glass fibre / HMPP fibre hybrid composite materials for civil infrastructure constructions
Malvern, J. L., Epaarachchi, J. A. and Lau, K. T.. 2011. "Investigation of the impact properties of glass fibre / HMPP fibre hybrid composite materials for civil infrastructure constructions." 18th International Conference on Composite Materials (ICCM-18). Jeju, Korea 21 - 26 Aug 2011 Korea.
Effect of degumming on tussah silk fibre
Ho, M. P., Lau, K. T. and Wang, H.. 2011. "Effect of degumming on tussah silk fibre." Lee, Woo (ed.) 18th International Conference on Composite Materials (ICCM-18). Jeju, Korea 21 - 26 Aug 2011 Seoul, Korea.
Identification of distortions to FBG spectrum using FBG fixed filters
Kahandawa, G. C., Epaarachchi, J. A. and Wang, H.. 2011. "Identification of distortions to FBG spectrum using FBG fixed filters." Lee, Woo (ed.) 18th International Conference on Composite Materials (ICCM-18). Jeju, Korea 21 - 26 Aug 2011 Korea.
Cure shrinkage in epoxy grouts for grouted repairs
Shamsuddoha, Md, Islam, Md Mainul, Aravinthan, Thiru, Manalo, Allan and Lau, Kin-tak. 2013. "Cure shrinkage in epoxy grouts for grouted repairs." Epaarachchi, Jayantha A., Lau, Alan Kin-tak and Leng, Jinsong (ed.) 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013). Gold Coast, Australia 10 - 12 Jul 2013 United States. https://doi.org/10.1117/12.2028085
Selection of hemp fabric as reinforcement in composite materials
Misnon, Mohd Iqbal, Islam, Md Mainul, Epaarachchi, Jayantha Ananda and Lau, Kin-tak. 2014. "Selection of hemp fabric as reinforcement in composite materials." Mashud, Mohammad (ed.) 3rd International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE 2014). Khulna, Bangladesh 26 - 27 Dec 2014 Khulna, Bangladesh.
Compressive properties of ceramic microballoon syntactic foams
Salleh, Zulzamri, Islam, Md Mainul and Epaarachchi, Jayantha Ananda. 2014. "Compressive properties of ceramic microballoon syntactic foams." Mashud, Mohammad (ed.) 3rd International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE 2014). Khulna, Bangladesh 26 - 27 Dec 2014 Khulna, Bangladesh.
Development of fracture and damage modeling concepts for composite materials
Kakei, Ayad Arab Ghaidan, Epaarachchi, Jayantha Ananda, Islam, M. Mainul and Leng, Jinsong. 2016. "Development of fracture and damage modeling concepts for composite materials." Epaarachchi, Jayantha Ananda and Kahandawa, Gayan Chanaka (ed.) Structural health monitoring technologies and next-generation smart composite structures. Roca Raton, USA. CRC Press. pp. 341-368
Effect of a nano-fibrous structure on the nanofiber mat's hydrophobicity
Javazmi, L., Khodami, A., Mazrouei-Sebdani, Z. and Epaarachchi, J.. 2016. "Effect of a nano-fibrous structure on the nanofiber mat's hydrophobicity." 2016 International Conference on Nanoscience and Nanotechnology (ICONN 2016) . Canberra, Australia 07 - 11 Feb 2016
Integration of textile fabric and coconut shell in particleboard
Misnon, M. I., Bahari, S. A., Islam, M. M. and Epaarachchi, J. A.. 2013. "Integration of textile fabric and coconut shell in particleboard ." Epaarachchi, Jayantha A., Lau, Alan Kin-tak and Leng, Jinsong (ed.) 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013). Gold Coast, Australia 10 - 12 Jul 2013 United States. https://doi.org/10.1117/12.2027836
Experimental investigation on the interfacial adhesion of date palm fibres with epoxy matrix
Alsaeed, T., Alajmi, A., Yousif, B. F., Ku, H. and Lau, Alan Kin-tak. 2012. "Experimental investigation on the interfacial adhesion of date palm fibres with epoxy matrix." Heslehurst, Rikard Benton and Byrne, Ann (ed.) Composites Australia and the CRC for Advanced Composite Structures Conference 2012: Diversity in Composites. Leura, Australia 15 - 16 Mar 2012 Melbourne, Australia.
Mechanical properties of sandwich composite made of syntactic foam core and GFRP skins
Salleh, Zulzamri, Islam, Md Mainul, Epaarachchi, Jayantha Ananda and Su, Haibin. 2016. "Mechanical properties of sandwich composite made of syntactic foam core and GFRP skins." AIMS Material Science. 3 (4), pp. 1704-1727. https://doi.org/10.3934/matersci.2016.4.1704
Analysis of stress concentration factor around the hole of syntactic foam tensile specimens
Salleh, Z., Islam, M. M. and Epaarachchi, J. A.. 2016. "Analysis of stress concentration factor around the hole of syntactic foam tensile specimens." International Journal of Advances in Science, Engineering and Technology (IJASEAT). 4 (3), pp. 102-106.
Woven hemp fabric reinforced vinyl ester composite: effect of water absorption on the mechanical properties degradation
Misnon, Mohd Iqbal, Islam, Md Mainul, Epaarachchi, Jayantha Ananda, Wang, Hao and Lau, Kin-tak. 2016. "Woven hemp fabric reinforced vinyl ester composite: effect of water absorption on the mechanical properties degradation." International Journal of Advances in Science, Engineering and Technology (IJASEAT). 4 (3), pp. 96-101.
Woven hemp fabric reinforced vinyl ester composite treated with fire retardant
Misnon, Mohd Iqbal, Islam, Md Mainul, Epaarachchi, Jayantha Ananda, Chen, Haizhen and Wang, Hao. 2016. "Woven hemp fabric reinforced vinyl ester composite treated with fire retardant." International Journal of Advances in Science, Engineering and Technology (IJASEAT). 4 (3), pp. 90-95.
Effect of elevated temperature on the tensile properties of recycled mixed plastic waste
Bajracharya, Rohan Muni, Manalo, Allan C., Karunasena, Warna and Lau, Kin-tak. 2014. "Effect of elevated temperature on the tensile properties of recycled mixed plastic waste." Smith, S. T. (ed.) 23rd Australasian Conference on the Mechanics of Structures and Materials (ACMSM23). Byron Bay, Australia 09 - 12 Dec 2014 Lismore, Australia.
Glass fibre and recycled mixed plastic wastes: recent developments and applications
Bajracharya, Rohan M., Manalo, Allan C., Karunasena, Warna and Lau, Kin-tak. 2014. "Glass fibre and recycled mixed plastic wastes: recent developments and applications." Smith, S. T. (ed.) 23rd Australasian Conference on the Mechanics of Structures and Materials (ACMSM23). Byron Bay, Australia 09 - 12 Dec 2014 Australia.
Shape memory polymers and their applications
Al Azzawi, W. S., Epaarachchi, Jayantha Ananda, Islam, M. Mainul and Leng, Jinsong. 2016. "Shape memory polymers and their applications." Epaarachchi, Jayantha Ananda and Kahandawa, Gayan Chanaka (ed.) Structural health monitoring technologies and next-generation smart composite structures. Boca Raton, Florida. CRC Press. pp. 447-478
Important aspects of finite element modeling of low density thermo plastic closed cell foams
Thota, N. M., Epaarachchi, J. A. and Lau, K. T.. 2013. "Important aspects of finite element modeling of low density thermo plastic closed cell foams." Mishra, G. C. and Sanskriti, Krishi (ed.) 3rd World Congress on Frontiers of Mechanical, Aerospace and Automotive Engineering (WCFMAAE 2013). New Delhi, India 02 - 03 Feb 2013 New Delhi, India.
Detection and characterisation of delamination damage propagation in woven glass fibre reinforced polymer composite using thermoelastic response mapping
Kakei, Ayad, Epaarachchi, J. A., Islam, Mainul, Leng, J. and Rajic, N.. 2016. "Detection and characterisation of delamination damage propagation in woven glass fibre reinforced polymer composite using thermoelastic response mapping." Composite Structures. 153, pp. 442-450. https://doi.org/10.1016/j.compstruct.2016.06.044
Experimental and theoretical studies on the properties of injection moulded glass fibre reinforced mixed plastics composites
Bajracharya, Rohan Muni, Manalo, Allan C., Karunasena, Warna and Lau, Kin-tak. 2016. "Experimental and theoretical studies on the properties of injection moulded glass fibre reinforced mixed plastics composites." Composites Part A: Applied Science and Manufacturing. 84, pp. 393-405. https://doi.org/10.1016/j.compositesa.2016.02.025
Behaviour of new building products from recycled-mixed plastic wastes
Bajracharya, Rohan Muni, Manalo, Allan C., Karunasena, Warna and Lau, Kin-tak. 2015. "Behaviour of new building products from recycled-mixed plastic wastes." 12th Composites Australia and CRC-ACS Conference 2015: Game On! Winning with Composites. Gold Coast, Australia 21 - 23 Apr 2015
Characterisation of recycled mixed plastic solid wastes: coupon and full-scale investigation
Bajracharya, Rohan Muni, Manalo, Allan C., Karunasena, Warna and Lau, Kin-tak. 2016. "Characterisation of recycled mixed plastic solid wastes: coupon and full-scale investigation." Waste Management. 48, pp. 72-80. https://doi.org/10.1016/j.wasman.2015.11.017
Mechanical properties of low density glass microballoon/vinyl ester syntactic foam for marine application
Salleh, Zulzamri, Islam, Md Mainul and Epaarachchi, Jayantha Ananda. 2015. "Mechanical properties of low density glass microballoon/vinyl ester syntactic foam for marine application." 12th Composites Australia and CRC-ACS Conference 2015: Game On! Winning with Composites. Gold Coast, Australia 21 - 23 Apr 2015
Compressive behaviour of low density polymeric syntactic foams
Salleh, Zulzamri, Islam, Md Mainul and Epaarachchi, Jayantha Ananda. 2015. "Compressive behaviour of low density polymeric syntactic foams." Applied Mechanics and Materials. 799-800, pp. 135-139. https://doi.org/10.4028/www.scientific.net/AMM.799-800.135
Analyses of woven hemp fabric characteristics for composite reinforcement
Misnon, M. I., Islam, M. M., Epaarachchi, J. A. and Lau, K. T.. 2015. "Analyses of woven hemp fabric characteristics for composite reinforcement." Materials and Design. 66 (A), pp. 82-92. https://doi.org/10.1016/j.matdes.2014.10.037
Effects of alkali treatment and elevated temperature on the mechanical properties of bamboo fibre-polyester composites
Manalo, Allan C., Wani, Evans, Zulkarnain, Noor Azwa, Karunasena, Warna and Lau, Kin-tak. 2015. "Effects of alkali treatment and elevated temperature on the mechanical properties of bamboo fibre-polyester composites." Composites Part B: Engineering. 80 (1), pp. 73-83. https://doi.org/10.1016/j.compositesb.2015.05.033
Improvement on the properties of polylactic acid (PLA) using bamboo charcoal particles
Ho, Mei-po, Lau, Kin-tak, Wang, Hao and Hui, David. 2015. "Improvement on the properties of polylactic acid (PLA) using bamboo charcoal particles." Composites Part B: Engineering. 81, pp. 14-25. https://doi.org/10.1016/j.compositesb.2015.05.048
Hemp reinforced composites with alkalization and acetylation fibre treatments
Wang, H., Kabir, M. M. and Lau, K. T.. 2014. "Hemp reinforced composites with alkalization and acetylation fibre treatments." Polymers and Polymer Composites. 22 (3), pp. 247-252. https://doi.org/10.1177/096739111402200
Evaluation of the blunt thoracic trauma caused by solid sports ball impacts
Thota, Narasimha, Epaarachchi, Jayantha and Lau, Kin Tak. 2015. "Evaluation of the blunt thoracic trauma caused by solid sports ball impacts." Journal of Biomechanical Science and Engineering. 10 (2). https://doi.org/10.1299/jbse.14-00264
Natural composites for bettering the environment [Keynote]
Lau, Alan K. T.. 2012. "Natural composites for bettering the environment [Keynote]." BIT's 1st Annual World Congress of Advanced Materials (WCAM 2012):Innovation, Cutting-Edge, and Smartness . Beijing, China 06 - 08 Jun 2012
Viscous criterion and its relation with the projectile-thorax energy interactions
Thota, Narasimha, Epaarachchi, Jayantha and Lau, Kin Tak. 2014. "Viscous criterion and its relation with the projectile-thorax energy interactions." 8th Australasian Congress on Applied Mechanics (ACAM 8). Melbourne, Australia 24 - 28 Nov 2014
Evaluation of the blunt thoracic trauma due to baseball impacts – review of the Blunt Criterion
Thota, Narasimha M., Epaarachchi, Jayantha A. and Lau, Kin Tak. 2014. "Evaluation of the blunt thoracic trauma due to baseball impacts – review of the Blunt Criterion." 8th Australasian Congress on Applied Mechanics (ACAM 8). Melbourne, Australia 24 - 28 Nov 2014
Effect of energy absorbing mechanisms on the blunt thoracic trauma caused by ballistic impacts
Thota, Narasimha M., Epaarachchi, Jayantha A. and Lau, Kin Tak. 2014. "Effect of energy absorbing mechanisms on the blunt thoracic trauma caused by ballistic impacts." 8th Australasian Congress on Applied Mechanics (ACAM 8). Melbourne, Australia 24 - 28 Nov 2014
Review of anthropomorphic test dummies for the evaluation of thoracic trauma due to blunt ballistic impacts
Thota, Narasimha M., Epaarachchi, Jayantha A. and Lau, Kin Tak. 2014. "Review of anthropomorphic test dummies for the evaluation of thoracic trauma due to blunt ballistic impacts." 8th Australasian Congress on Applied Mechanics (ACAM 8). Melbourne, Australia 24 - 28 Nov 2014
Impact location determination on thin laminated composite plates using an NIR-FBG sensor system
Hafizi, Z. M., Epaarachchi, J. and Lau, K. T.. 2015. "Impact location determination on thin laminated composite plates using an NIR-FBG sensor system." Measurement. 61, pp. 51-57. https://doi.org/10.1016/j.measurement.2014.08.040
Signal monitoring system for monitoring strain applied to a composite component
Kahandawa Appuhamillage, Gayan Chanaka, Epaarachchi, Jayantha and Wang, Hao. 2015. Signal monitoring system for monitoring strain applied to a composite component. US Patent No. 9063032 B2/23rd June 2015
Recent research trend in marine engineering materials (Keynote lecture)
Lau, Kin-Tak. 2010. "Recent research trend in marine engineering materials (Keynote lecture) ." 160th Eastern Forum of Sciences and Technology . Shanghai, China 20 - 21 Sep 2011
CAE simulation based methodology for airbag compliant vehicle front protection system development
Thota, Narasimha, Epaarachchi, Jayantha and Lau, Kin Tak. 2013. "CAE simulation based methodology for airbag compliant vehicle front protection system development." International Journal of Vehicle Structures and Systems. 5 (3-4), pp. 95-104. https://doi.org/10.4273/ijvss.5.3-4.04
Potentiality of utilising natural textile materials for engineering composites applications
Misnon, Mohd Iqbal, Islam, Md Mainul, Epaarachchi, Jayantha Ananda and Lau, Kin-tak. 2014. "Potentiality of utilising natural textile materials for engineering composites applications." Materials and Design. 59, pp. 359-368. https://doi.org/10.1016/j.matdes.2014.03.022
Glass-fibre reinforced recycled mixed plastics (GMP): totally recyclable and renewable composites
Bajracharya, Rohan Muni, Manalo, Allan, Karunasena, Karu and Lau, Kin-tak. 2014. "Glass-fibre reinforced recycled mixed plastics (GMP): totally recyclable and renewable composites." IEEE Australia and New Zealand Student and Young Professional Congress (ANZSCON 2014). Brisbane, Australia 03 - 05 Jul 2014
Optimization effect of micro hardness by nanoclay clusters in nanoclay/epoxy composites
Lam, Chun-Ki and Lau, Kin-Tak. 2009. "Optimization effect of micro hardness by nanoclay clusters in nanoclay/epoxy composites ." Journal of Thermoplastic Composite Materials. 22 (2), pp. 213-225. https://doi.org/10.1177/0892705708091856
Polycarbonate-carbon nanofibers composites: an electron spin resonance study
Chipara, Mircea, Brittain, Wiliam J., Lau, Kin-Tak and Chipara, Magdalena Dorina. 2008. "Polycarbonate-carbon nanofibers composites: an electron spin resonance study ." Polymers and Polymer Composites. 16 (8), pp. 519-526.
Chemical treatments on hemp fibre composites
Wang, Hao, Kabir, Mazed and Lau, K. T.. 2013. "Chemical treatments on hemp fibre composites." Wang, Xungai (ed.) Fiber Society Spring 2013 Technical Conference (FS 2013): Advancing Scientific Knowledge Pertaining to Fibers and Fibrous Materials. Geelong, Australia 22 - 24 May 2013 Raleigh, NC. United States.
Analysis of heat-treated bovine cortical bone by thermal gravimetric and nanoindentation
Lau, Mei-ling, Lau, Kin-tak, Ku, Harry, Cardona, Francisco and Lee, Joong-Hee. 2013. "Analysis of heat-treated bovine cortical bone by thermal gravimetric and nanoindentation ." Composites Part B: Engineering. 55, pp. 447-452. https://doi.org/10.1016/j.compositesb.2013.06.027
An investigation of acoustic emission signal attenuation for monitoring of progressive failure in fiberglass reinforced composite laminates
Hafizi, Z. M., Epaarachchi, J. and Lau, K. T.. 2013. "An investigation of acoustic emission signal attenuation for monitoring of progressive failure in fiberglass reinforced composite laminates ." International Journal of Automotive and Mechanical Engineering. 8 (1), pp. 1442-1456. https://doi.org/10.15282/ijame.8.2013.31.0119
Effects of processing conditions of poly(methylmethacrylate) encapsulated liquid curing agent on the properties of self-healing composites
Li, Qi, Mishra, Ananta Kumar, Kim, Nam Hoon, Kuila, Tapas, Lau, Kin-tak and Lee, Joong Hee. 2013. "Effects of processing conditions of poly(methylmethacrylate) encapsulated liquid curing agent on the properties of self-healing composites ." Composites Part B: Engineering. 49, pp. 6-15. https://doi.org/10.1016/j.compositesb.2013.01.011
Hemp and hemp-based composites
Wang, Hao and Lau, Alan K.T.. 2013. "Hemp and hemp-based composites." Thakur, Vijay Kumar (ed.) Green composites from natural resources. Boca Raton, FL. United States. CRC Press. pp. 63-94
An overview of mechanical properties and durability of glass-fibre reinforced recycled mixed plastic waste composites
Bajracharya, Rohan Muni, Manalo, Allan C., Karunasena, Warna and Lau, Kin-tak. 2014. "An overview of mechanical properties and durability of glass-fibre reinforced recycled mixed plastic waste composites." Materials and Design. 62, pp. 98-112. https://doi.org/10.1016/j.matdes.2014.04.081
Tensile properties of glass fibre reinforced recycled mixed plastic composites
Bajracharya, Rohan Muni, Manalo, Allan C., Karunasena, Warna and Lau, Kin-tak. 2014. "Tensile properties of glass fibre reinforced recycled mixed plastic composites." Australasian Composites Conference (CA 2014): Materials for a Lighter and Smarter World. Newcastle, Australia 07 - 09 Apr 2014 Melbourne, Australia.
Effectiveness of using fibre-reinforced polymer composites for underwater steel pipeline repairs
Shamsuddoha, Md, Islam, Md Mainul, Aravinthan, Thiru, Manalo, Allan and Lau, Kin-tak. 2013. "Effectiveness of using fibre-reinforced polymer composites for underwater steel pipeline repairs." Composite Structures. 100, pp. 40-54. https://doi.org/10.1016/j.compstruct.2012.12.019
Prediction of obsolete FBG sensor using ANN for efficient and robust operation of SHM systems
Kahandawa, Gayan C., Epaarachchi, Jayantha A., Wang, Hao and Lau, K. T.. 2013. "Prediction of obsolete FBG sensor using ANN for efficient and robust operation of SHM systems." 4th Asia-Pacific Workshop on Structural Health Monitoring (APWSHM 2012). Melbourne, Australia 05 - 07 Dec 2012 Zurich, Switzerland. https://doi.org/10.4028/www.scientific.net/KEM.558.546
Mechanical properties of bamboo fiber-polyester composites
Manalo, A. C., Karunasena, W. and Lau, K. T.. 2013. "Mechanical properties of bamboo fiber-polyester composites." Samali, Bijan, Attard, Mario and Song, Chongmin (ed.) 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM22). Sydney, Australia 11 - 14 Dec 2012 Leiden, Netherlands.
Smart structure for small wind turbine blade
Supeni, E. E., Epaarachchi, J. A., Islam, M. M. and Lau, K. T.. 2013. "Smart structure for small wind turbine blade." Epaarachchi, Jayantha A., Lau, Alan Kin-tak and Leng, Jinsong (ed.) 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013). Gold Coast, Australia 10 - 12 Jul 2013 United States. https://doi.org/10.1117/12.2027725
Mechanical properties of epoxy grouts for structural repair
Shamsuddoha, M., Islam, M. M., Aravinthan, T., Manalo, A. C. and Lau, K. T.. 2013. "Mechanical properties of epoxy grouts for structural repair." Samali, Bijan, Attard, Mario M. and Song, Chongmin (ed.) 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM22). Sydney, Australia 11 - 14 Dec 2012 London, United Kingdom.
Structural evaluation of concrete expanded polystyrene sandwich panels for slab applications
Bajracharya, R. M., Lokuge, W. P., Karunasena, W., Lau, K. T. and Mosallam, A. S.. 2013. "Structural evaluation of concrete expanded polystyrene sandwich panels for slab applications." Samali, Bijan, Attard, Mario M. and Song, Chongmin (ed.) 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM22). Sydney, Australia 11 - 14 Dec 2012 London, United Kingdom.
Effect of coarse filler on shrinkages and dynamic mechanical properties of epoxy grouts
Shamsuddoha, Md, Islam, Md Mainul, Aravinthan, Thiru, Manalo, Allan and Lau, Kin-Tak. 2014. "Effect of coarse filler on shrinkages and dynamic mechanical properties of epoxy grouts." Journal of Multifunctional Composites. 2 (1), pp. 61-66. https://doi.org/10.12783/issn.2168-4286/2.1/
Embedded fibre optic sensors under multi-axial loading: a pilot study
Peauril, J., Epaarachchi, J., Lau, K. T. and Wang, H.. 2013. "Embedded fibre optic sensors under multi-axial loading: a pilot study." Epaarachchi, Jayantha A. , Lau, Alan Kin-tak and Leng, Jinsong (ed.) 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013). Gold Coast, Australia 10 - 12 Jul 2013 Bellingham, WA. United States. SPIE. https://doi.org/10.1117/12.2027958
NIR fibre bragg grating as dynamic sensor: an application of 1D digital wavelet analysis for signal denoising
Hafizi, Z. M., Kahandawa, G. C., Epaarachchi, J., Lau, K. T., Canning, J. and Cook, K.. 2013. "NIR fibre bragg grating as dynamic sensor: an application of 1D digital wavelet analysis for signal denoising ." Epaarachchi, Jayantha A. , Lau, Alan Kin-tak and Leng, Jinsong (ed.) 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013). Gold Coast, Australia 10 - 12 Jul 2013 Bellingham, WA. United States. https://doi.org/10.1117/12.2026668
Characterisation of mechanical and thermal properties of epoxy grouts for composite repair of steel pipelines
Shamsuddoha, Md, Islam, Md Mainul, Aravinthan, Thiru, Manalo, Allan and Lau, Kin-tak. 2013. "Characterisation of mechanical and thermal properties of epoxy grouts for composite repair of steel pipelines." Materials and Design. 52, pp. 315-327. https://doi.org/10.1016/j.matdes.2013.05.068
Development and validation of a mechanical thorax surrogate for the evaluation of the blunt trauma due to ballistic impacts
Thota, Narasimha. 2014. Development and validation of a mechanical thorax surrogate for the evaluation of the blunt trauma due to ballistic impacts. Doctorate other than PhD Doctor of Engineering. University of Southern Queensland.
Indexing damage using distortion of embedded FBG sensor response spectra
Kahandawa, Gayan C., Epaarachchi, Jayantha A. and Lau, K. T.. 2013. "Indexing damage using distortion of embedded FBG sensor response spectra ." Epaarachchi, Jayantha A. , Lau, Alan Kin-tak and Leng, Jinsong (ed.) 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013). Gold Coast, Australia 10 - 12 Jul 2013 Bellingham, WA. United States. https://doi.org/10.1117/12.2027945
Extraction and processing of real time strain of embedded FBG sensors using a fixed filter FBG circuit and an artificial neural network
Kahandawa, Gayan C., Epaarachchi, Jayantha, Wang, Hao, Canning, John and Lau, K. T.. 2013. "Extraction and processing of real time strain of embedded FBG sensors using a fixed filter FBG circuit and an artificial neural network." Measurement. 46 (10), pp. 4045-4051. https://doi.org/10.1016/j.measurement.2013.07.029
Development of artificial neural network model in predicting performance of the smart wind turbine blade
Supeni, E. E., Epaarachchi, J. A., Islam, M. M. and Lau, K. T.. 2013. "Development of artificial neural network model in predicting performance of the smart wind turbine blade." 3rd Malaysian Postgraduate Conference (MPC 2013). Sydney, Australia 04 - 05 Jul 2013 Sydney, Australia.
Textile material forms for reinforcement materials: a review
Misnon, M. I., Islam, M. M., Epaarachchi, J. and Lau, K. T.. 2013. "Textile material forms for reinforcement materials: a review." 3rd Malaysian Postgraduate Conference (MPC 2013). Sydney, Australia 04 - 05 Jul 2013 Sydney, Australia.
Wave propogation scattering due to defect on thin composite plates
Hafizi, Z. M., Epaarachchi, J. and Lau, K. T.. 2013. "Wave propogation scattering due to defect on thin composite plates." 3rd Malaysian Postgraduate Conference (MPC 2013). Sydney, Australia 04 - 05 Jul 2013 Sydney, Australia.
Estimation of strain of distorted FBG sensor spectra using a fixed FBG filter circuit and an artificial neural network
Kahandawa, Gayan C., Epaarachchi, Jayantha, Lau, K. T. and Canning, John. 2013. "Estimation of strain of distorted FBG sensor spectra using a fixed FBG filter circuit and an artificial neural network ." Palaniswami, M., Leckie, C., Kanhere, S. and Gubbi, J. (ed.) IEEE 8th International Conference on Intelligent Sensors, Sensor Networks and Information Processing (ISSNIP 2013): Sensing the Future. Melbourne, Australia 02 - 05 Apr 2013 Piscataway, NJ. United States. https://doi.org/10.1109/ISSNIP.2013.6529770
Effect of the energy absorbing mechanisms on the blunt thoracic trauma caused by a typical foam projectile
Thota, Narasimha M., Epaarachchi, Jayantha A. and Lau, Kin-tak. 2013. "Effect of the energy absorbing mechanisms on the blunt thoracic trauma caused by a typical foam projectile." Mishra, G. C. and Sanskriti, Krishi (ed.) 3rd World Congress on Frontiers of Mechanical, Aerospace and Automotive Engineering (WCFMAAE 2013). New Delhi, India 02 - 03 Feb 2013 New Delhi, India.
Effect of the foam embellishments on the pedestrian safety of the vehicle front protection systems
Thota, N. M., Epaarachchi, J. A. and Lau, K. T.. 2013. "Effect of the foam embellishments on the pedestrian safety of the vehicle front protection systems." Mishra, G. C. and Sanskriti, Krishi (ed.) 3rd World Congress on Frontiers of Mechanical, Aerospace and Automotive Engineering (WCFMAAE 2013). New Delhi, India 02 - 03 Feb 2013 New Delhi, India.
Effects of chemical treatments on hemp fibre structure
Kabir, M. M., Wang, H., Lau, K. T. and Cardona, F.. 2013. "Effects of chemical treatments on hemp fibre structure." Applied Surface Science. 276, pp. 13-23. https://doi.org/10.1016/j.apsusc.2013.02.086
Tensile properties of chemically treated hemp fibres as reinforcement for composites
Kabir, M. M., Wang, H., Lau, K. T. and Cardona, F.. 2013. "Tensile properties of chemically treated hemp fibres as reinforcement for composites." Composites Part B: Engineering. 53, pp. 362-368. https://doi.org/10.1016/j.compositesb.2013.05.048
Nafion-peptized laponite clay nanocomposite membrane for PEMFC
Mishra, Ananta Kumar, Bae, Seon-Hyeong, Kim, Nam Hoon, Lau, Kin-tak and Lee, Joong Hee. 2012. "Nafion-peptized laponite clay nanocomposite membrane for PEMFC ." Lau, Alan K-T, Srivatsan, T. S., Bhattacharyya, Debes, Zhang, Ming Qiu and Ho, Mabel M. P. (ed.) 20th International Symposium on Processing and Fabrication of Advanced Materials (PFAM 20). Hong Kong 15 - 18 Dec 2011 Zurich, Switzerland . https://doi.org/10.4028/www.scientific.net/AMR.410.148
Fibre composites for high pressure pipeline repairs, in-air and subsea: an overview
Shamsuddoha, Md, Islam, Md Mainul, Aravinthan, Thiru, Manalo, Allan, Lau, Kin-tak and Elder, David. 2012. "Fibre composites for high pressure pipeline repairs, in-air and subsea: an overview." Ueda, Tamon (ed.) 3rd Asia-Pacific Conference on FRP in Structures (APFIS 2012). Sapporo, Japan 02 - 04 Feb 2012 Hokkaido, Japan.
Non-velocity based analysis of passive ultrasonic signal for source location detection in composite plates: a pilot study
Hafizi, Z. M., Epaarachchi, J., Nizwan, C. K. E. and Lau, K. T.. 2012. "Non-velocity based analysis of passive ultrasonic signal for source location detection in composite plates: a pilot study." 1st International Conference of Mechanical Engineering Research (ICMER 2011). Kuantan, Malaysia 05 - 07 Dec 2011 Bristol, United Kingdom . https://doi.org/10.1088/1757-899X/36/1/012008
Modal acoustic emission investigation for progressive failure monitoring in thin composite plates under tensile test
Hafizi, Mohd Zohari, Epaarachchi, Jayantha Ananda and Lau, K. T.. 2013. "Modal acoustic emission investigation for progressive failure monitoring in thin composite plates under tensile test." Key Engineering Materials. 558 (558), pp. 65-75. https://doi.org/10.4028/www.scientific.net/KEM.558.65
Optimized FBG sensor network for efficient detection of a delamination in FRP structures
Kahandawa, G. C., Epaarachchi, J. A., Wang, H. and Lau, K. T.. 2012. "Optimized FBG sensor network for efficient detection of a delamination in FRP structures." Jaafar, M., Azura, A. R., Leong, K. H. and Leong, A. Y. L. (ed.) 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today. Kuala Lumpur, Malaysia 06 - 08 Nov 2012 Kowloon, Hong Kong.
Detecting delamination in a composite structure using an embedded FBG-AE hybrid system
Kahandawa, G. C., Hafizi, Z. M., Epaarachchi, J. and Lau, K. T.. 2012. "Detecting delamination in a composite structure using an embedded FBG-AE hybrid system." Kotousov, Andrei (ed.) 7th Australasian Congress on Applied Mechanics (ACAM 2012). Adelaide, Australia 09 - 12 Dec 2012 Canberra, Australia.
Modelling of tensile properties glass powder/epoxy composites post-cured in an oven and in microwaves
Ku, H., Epaarachchi, J., Trada, M. and Wong, P.. 2013. "Modelling of tensile properties glass powder/epoxy composites post-cured in an oven and in microwaves ." Journal of Reinforced Plastics and Composites. 32 (10), pp. 689-699. https://doi.org/10.1177/0731684412475333
Fabrication process optimization of hemp fibre reinforced polypropylene composites
Yan, Z. L., Wang, H., Lau, K. T., Zhang, J. C., Zhang, H. and Ding, Y.. 2012. "Fabrication process optimization of hemp fibre reinforced polypropylene composites." Jaafar, M., Azura, A. R., Leong, K. H. and Leong, A. Y L. (ed.) 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today. Kuala Lumpur, Malaysia 06 - 08 Nov 2012 Kowloon, Hong Kong.
Mechanical properties of a bamboo charcoal reinforced polylactic acid composite
Ho, M. P., Wang, H., Lau, K. T., Jayaraman, K. and Bhattacharyya, D.. 2012. "Mechanical properties of a bamboo charcoal reinforced polylactic acid composite." Jaafar, M., Azura, A. R., Leong, K. H. and Leong, A. Y. (ed.) 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today. Kuala Lumpur, Malaysia 06 - 08 Nov 2012 Kowloon, Hong Kong.
An investigation of effective detection length of a localized micro-failure in a laminated thin composite plate using FBG sensor integrated AE system
Hafizi, Z. M., Epaarachchi, J. and Lau, K. T.. 2012. "An investigation of effective detection length of a localized micro-failure in a laminated thin composite plate using FBG sensor integrated AE system." Jaafar, M., Azura, A. R., Leong, K. H. and Leong, A. Y. L. (ed.) 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today. Kuala Lumpur, Malaysia 06 - 08 Nov 2012 Kowloon, Hong Kong.
Development of smart wind turbine blades
Supeni, E. E., Epaarachchi, J. A., Islam, M. M. and Lau, K. T.. 2012. "Development of smart wind turbine blades." Jaafar, M., Azura, A. R., Leong, K. H and Leong, A. Y. L (ed.) 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today. Kuala Lumpur, Malaysia 06 - 08 Nov 2012 Kowloon, Hong Kong.
Thermal properties and structure conformation on silkworm silk fibre
Ho, Mei-po, Wang, Hao and Lau, Kin-tak. 2012. "Thermal properties and structure conformation on silkworm silk fibre." Heslehurst, Rikard Benton and Byrne, Ann (ed.) Composites Australia and the CRC for Advanced Composite Structures Conference 2012: Diversity in Composites. Leura, Australia 15 - 16 Mar 2012 Melbourne, Australia.
Compressive properties of chemically-treated hemp fibre reinforced composites
Kabir, Mohammad Mazedul, Wang, Hao, Lau, Alan, Cardona, Francisco and Aravinthan, Thiru. 2012. "Compressive properties of chemically-treated hemp fibre reinforced composites." Heslehurst, Rikard Benton and Byrne, Ann (ed.) Composites Australia and the CRC for Advanced Composite Structures Conference 2012: Diversity in Composites. Leura, Australia 15 - 16 Mar 2012 Melbourne, Australia.
Develop and validate a biomechanical surrogate of the human thorax using corrugated sheets: a feasibility study
Thota, Narasimha Murthy, Eepaarachchi, Jayantha A. and Lau, K. T.. 2012. "Develop and validate a biomechanical surrogate of the human thorax using corrugated sheets: a feasibility study." 7th Australasian Congress on Applied Mechanics (ACAM 2012). Adelaide, Australia 09 - 12 Dec 2012 Canberra, Australia.
Use of fixed wavelength Fibre-Bragg Grating (FBG) filters to capture time domain data from the distorted spectrum of an embedded FBG sensor to estimate strain with an artificial neural network
Kahandawa, G. C., Epaarachchi, J. A., Wang, H., Followell, D. and Birt, P.. 2013. "Use of fixed wavelength Fibre-Bragg Grating (FBG) filters to capture time domain data from the distorted spectrum of an embedded FBG sensor to estimate strain with an artificial neural network." Sensors and Actuators A: Physical. 194, pp. 1-7. https://doi.org/10.1016/j.sna.2012.12.028
Measurements of heat treatment effects on bovine cortical bones by nanoindentation and compression testing
Lau, Mei-Ling, Lau, Kin-Tak, Ku, Harry, Bahattacharyya, Debes and Yao, Yan-Dong. 2012. "Measurements of heat treatment effects on bovine cortical bones by nanoindentation and compression testing." Journal of Biomaterials and Nanobiotechnology. 3 (1), pp. 105-113. https://doi.org/10.4236/jbnb.2012.31014
Design of smart structures for wind turbine blades
Supeni, E. E., Epaarachchi, J. A., Islam, M. M. and Lau, K. T.. 2012. "Design of smart structures for wind turbine blades." Noor, M. M., Rahman, M. M. and Ismail, J. (ed.) 2nd Malaysian Postgraduate Conference (MPC 2012). Gold Coast, Australia 07 - 09 Jul 2012 Sydney, Australia.
A study on the dynamic mechanical properties of silk fibre composites
Ho, Mei-po, Wang, Hao, Ho, Chun-kit and Lau, Kin-tak. 2012. "A study on the dynamic mechanical properties of silk fibre composites." Advanced Materials Research. 410, pp. 106-109. https://doi.org/10.4028/www.scientific.net/AMR.410.106
Duct noise control by using very light composite plate
Choy, Y. S., Liu, Y. and Lau, K. T.. 2012. "Duct noise control by using very light composite plate." Advanced Materials Research. 410, pp. 361-365. https://doi.org/10.4028/www.scientific.net/AMR.410.361
Effect of degumming time on silkworm silk fibre for biodegradable polymer composites
Ho, Mei-po, Wang, Hao and Lau, Kin-tak. 2012. "Effect of degumming time on silkworm silk fibre for biodegradable polymer composites." Applied Surface Science. 258 (8), pp. 3948-3955. https://doi.org/10.1016/j.apsusc.2011.12.068
Chemical treatments on plant-based natural fibre reinforced polymer composites: an overview
Kabir, M. M., Wang, H., Lau, K. T. and Cardona, F.. 2012. "Chemical treatments on plant-based natural fibre reinforced polymer composites: an overview ." Composites Part B: Engineering. 43 (7), pp. 2883-2892. https://doi.org/10.1016/j.compositesb.2012.04.053
Interfacial bonding and degumming effects on silk fibre/polymer biocomposites
Ho, Mei-po, Wang, Hao, Lau, Kin-tak, Lee, Joong-hee and Hui, David. 2012. "Interfacial bonding and degumming effects on silk fibre/polymer biocomposites ." Composites Part B: Engineering. 43 (7), pp. 2801-2812. https://doi.org/10.1016/j.compositesb.2012.04.042
Signal monitoring system and methods of operating same
Kahandawa, Gayan Chanaka, Epaarachchi, Jayantha and Wang, Hao. 2013. Signal monitoring system and methods of operating same. WO/2013/151607
Design of an impact resistant glass fibre/epoxy composites using short silk fibres
Ho, Mei-po and Lau, Kin-tak. 2012. "Design of an impact resistant glass fibre/epoxy composites using short silk fibres." Materials and Design. 35 (1), pp. 664-669. https://doi.org/10.1016/j.matdes.2011.10.003
Modal analysis of high frequency acoustic signal approach for progressive failure monitoring in thin composite plates
Hafizi, Z. M., Epaarachchi, J. and Lau, K. T.. 2012. "Modal analysis of high frequency acoustic signal approach for progressive failure monitoring in thin composite plates." 2nd Malaysian Postgraduate Conference (MPC 2012). Gold Coast, Australia 07 - 09 Jul 2012 Sydney, Australia.
A critical review on the manufacturing processes in relation to the properties of nanoclay/polymer composites
Albdiry, M. T., Yousif, B. F., Ku, H. and Lau, K. T.. 2013. "A critical review on the manufacturing processes in relation to the properties of nanoclay/polymer composites." Journal of Composite Materials. 47 (9), pp. 1093-1115. https://doi.org/10.1177/0021998312445592
Reinforcement of polypropylene with hemp fibres
Yan, Z. L., Wang, H., Lau, K. T., Pather, S., Zhang, J. C., Lin, G. and Ding, Y.. 2013. "Reinforcement of polypropylene with hemp fibres." Composites Part B: Engineering. 46, pp. 221-226. https://doi.org/10.1016/j.compositesb.2012.09.027
A potential material for tissue engineering: silkworm silk/PLA biocomposite
Cheung, Hoi-Yan, Lau, Kin-tak, Tao, Xiao-Ming and Hui, David. 2008. "A potential material for tissue engineering: silkworm silk/PLA biocomposite ." Composites Part B: Engineering. 39 (6), pp. 1026-1033. https://doi.org/10.1016/j.compositesb.2007.11.009
Sonication effect on the mechanical properties of MWCNTs reinforced natural rubber
Tarawneh, Mou’ad A., Ahmad, Sahrim Hj., EhNoum, SeYong and Lau, Kin-tak. 2013. "Sonication effect on the mechanical properties of MWCNTs reinforced natural rubber." Journal of Composite Materials. 47 (5), pp. 579-585. https://doi.org/10.1177/0021998312443394
Critical factors on manufacturing processes of natural fibre composites
Ho, Mei-po, Wang, Hao, Lee, Joong-Hee, Ho, Chun-kit, Lau, Kin-tak, Leng, Jinsong and Hui, David. 2012. "Critical factors on manufacturing processes of natural fibre composites." Composites Part B: Engineering. 43 (8), pp. 3549-3562. https://doi.org/10.1016/j.compositesb.2011.10.001
Micro-crack behavior of carbon fiber reinforced thermoplastic modified epoxy composites for cryogenic applications
He, Yu-xin, Li, Qi, Kuila, Tapas, Kim, Nam Hoon, Jiang, Tongwu, Lau, Kin-tak and Lee, Joong Hee. 2013. "Micro-crack behavior of carbon fiber reinforced thermoplastic modified epoxy composites for cryogenic applications." Composites Part B: Engineering. 44 (1), pp. 533-539. https://doi.org/10.1016/j.compositesb.2012.03.014
Effect of silk fiber to the mechanical and thermal properties of its biodegradable composites
Ho, Mei-Po, Wang, Hao, Lau, Kin-Tak and Leng, Jinsong. 2013. "Effect of silk fiber to the mechanical and thermal properties of its biodegradable composites ." Journal of Applied Polymer Science. 127 (4), pp. 2389-2396. https://doi.org/10.1002/app.37539
Mechanical properties of chemically-treated hemp fibre reinforced sandwich composites
Kabir, M. M., Wang, H., Lau, K. T., Cardona, F. and Aravinthan, T.. 2012. "Mechanical properties of chemically-treated hemp fibre reinforced sandwich composites." Composites Part B: Engineering. 43 (2), pp. 159-169. https://doi.org/10.1016/j.compositesb.2011.06.003
Use of FBG sensors for SHM in aerospace structures
Kahandawa, Gayan C., Epaarachchi, Jayantha, Wang, Hao and Lau, K. T.. 2012. "Use of FBG sensors for SHM in aerospace structures." Photonic Sensors. 2 (3), pp. 203-214. https://doi.org/10.1007/s13320-012-0065-4
Development of composite plate for compact silencer design
Choy, Y. S., Liu, Y., Cheung, H. Y., Xi, Q. and Lau, K. T.. 2012. "Development of composite plate for compact silencer design ." Journal of Sound and Vibration. 331 (10), pp. 2348-2364. https://doi.org/10.1016/j.jsv.2011.12.023
The effect of fibre chemical treatments on hemp reinforced composites
Wang, H., Kabir, M. M. and Lau, K. T.. 2011. "The effect of fibre chemical treatments on hemp reinforced composites ." 18th International Conference on Composite Materials (ICCM-18). Jeju, Korea 21 - 26 Aug 2011 Seoul, Korea.
Introduction to multifunctional polymer nanocomposites
Leng, Jinsong, Li, Jianjun and Lau, Alan kin-tak. 2011. "Introduction to multifunctional polymer nanocomposites." Leng, Jinsong and Lau, Alan kin-tak (ed.) Multifunctional polymer nanocomposites. Boca Raton, FL. United States. CRC Press. pp. 1-18
Mechanical properties of an injected silk fibre reinforced PLA composite
Ho, Mei-Po, Lau, Kin-tak, Wang, Hao and Bhattacharyya, Debes. 2011. "Mechanical properties of an injected silk fibre reinforced PLA composite." Bhattacharyya, D., Lin, R. J. T. and Srivatsan, T. S. (ed.) 19th International Symposium on Processing and Fabrication of Advanced Materials (PFAM XIX). Auckland, New Zealand 14 - 17 Jan 2011 Auckland, New Zealand.
Recent research trend in natural-fibre composites
Lau, Alan K. T. and Ho, Mabel M. P.. 2011. "Recent research trend in natural-fibre composites." JEC Composites Magazine.
Electrochemical performance of a graphene polypyrrole nanocomposite as a supercapacitor electrode
Bose, Saswata, Kim, Nam Hoon, Kuila, Tapas, Lau, Kin-tak and Lee, Joong Hee. 2011. "Electrochemical performance of a graphene polypyrrole nanocomposite as a supercapacitor electrode ." Nanotechnology. 22 (29), p. 5202. https://doi.org/10.1088/0957-4484/22/29/295202
Assessing heat-treatment effects on bovine cortical bones by nanoindentation
Lau, Mei-ling, Lau, Kin-tak, Ku, Harry, Bahattacharyya, Debes and Lee, Joong-Hee. 2012. "Assessing heat-treatment effects on bovine cortical bones by nanoindentation ." Advanced Materials Research. https://doi.org/10.4028/www.scientific.net/AMR.410.110
Electromechanical stability of compressible dielectric elastomer actuators
Liu, Liwi, Liu, Yanju, Leng, Jinsong and Lau, Kin-tak. 2011. "Electromechanical stability of compressible dielectric elastomer actuators ." Smart Materials and Structures. 20 (11), p. 115015. https://doi.org/10.1088/0964-1726/20/11/115015
Novel phenolic resins with improved mechanical and toughness properties
Cardona, Francisco, Lau, Alan Kin-Tak and Fedrigo, Jessica. 2012. "Novel phenolic resins with improved mechanical and toughness properties." Journal of Applied Polymer Science. 123 (4), pp. 2131-2139. https://doi.org/10.1002/app.34719
Property enhancement of a carbon fiber/epoxy composite by using carbon nanotubes
Kim, M. T., Rhee, K. Y., Lee, J. H., Hui, D. and Lau, Alan K. T.. 2011. "Property enhancement of a carbon fiber/epoxy composite by using carbon nanotubes ." Composites Part B: Engineering. 42 (5), pp. 1257-1261. https://doi.org/10.1016/j.compositesb.2011.02.005
Correlation of mechanical performance and morphological structures of epoxy micro/nanoparticulate composites
Dong, Yu, Chaudhary, Deeptangshu, Ploumis, Charlie and Lau, Kin-tak. 2011. "Correlation of mechanical performance and morphological structures of epoxy micro/nanoparticulate composites ." Composites Part A: Applied Science and Manufacturing. 42 (10), pp. 1483-1492. https://doi.org/10.1016/j.compositesa.2011.06.015
Mechanism of reinforcement in a nanoclay/polymer composite
Chan, Mo-lin, Lau, Kin-tak, Wong, Tsun-tat, Ho, Mei-po and Hui, David. 2011. "Mechanism of reinforcement in a nanoclay/polymer composite ." Composites Part B: Engineering. 42 (6), pp. 1708-1712. https://doi.org/10.1016/j.compositesb.2011.03.011
An investigation on the student performance in first year fundamental engineering course engineering statistics
Islam, Md Mainul and Epaarachchi, Jayantha Ananda. 2012. "An investigation on the student performance in first year fundamental engineering course engineering statistics." Mortimer, Rachel (ed.) 15th International First Year in Higher Education Conference (FYHE 2012) . Brisbane, Australia 26 - 29 Jun 2012 Brisbane, Australia.
An experimental investigation of early damage localization for thin glass fibre reinforced symmetric composite laminates
Hafizi, Z. M., Epaarachchi, J. and Lau, K. T.. 2012. "An experimental investigation of early damage localization for thin glass fibre reinforced symmetric composite laminates." Heslehurst, Rikard Benton and Byrne, Ann (ed.) Composites Australia and the CRC for Advanced Composite Structures Conference 2012: Diversity in Composites. Leura, Australia 15 - 16 Mar 2012 Melbourne, Australia.
Accelerated full scale fatigue testing of a small composite wind turbine blade using a mechanically operated test rig
Epaarachchi, Jayantha A. and Clausen, Philip D.. 2004. "Accelerated full scale fatigue testing of a small composite wind turbine blade using a mechanically operated test rig." Atrens, Andrej, Boland, J. N., Clegg, Richard and Griffiths, John (ed.) 2004 Structural Integrity and Fracture International Conference (SIF2004). Brisbane, Australia 26 - 29 Sep 2004 Australia.
Investigation of embedded near infrared fibre Bragg grating (FBG) sensors (830 nm) in structural health monitoring of glass fibre composite structures
Epaarachchi, Jayantha A., Canning, John and Stevenson, Michael. 2008. "Investigation of embedded near infrared fibre Bragg grating (FBG) sensors (830 nm) in structural health monitoring of glass fibre composite structures ." Sampson, David D. (ed.) 19th International Conference on Optical Fibre Sensors (OFS-19). Perth, Australia 15 - 18 Apr 2008 Bellingham, WA. United States. SPIE. https://doi.org/10.1117/12.786896
Dynamic behavior of hybrid composite bridge girder
Epaarachchi, J. A., Karunasena, W. and Aravinthan, T.. 2008. "Dynamic behavior of hybrid composite bridge girder." Aravinthan, Thiru, Karunasena, Warna (Karu) and Wang, Hao (ed.) 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM20). Toowoomba, Australia 02 - 05 Dec 2008 London, United Kingdom.
The developments of structural health/integrity monitoring systems using FBG sensors at CEEFC of USQ
Kahandawa, Gayan C., Epaarachchi, Jayantha A., Wang, Hao and Aravinthan, Thiru. 2010. "The developments of structural health/integrity monitoring systems using FBG sensors at CEEFC of USQ." Goh, Steven C. and Wang, Hao (ed.) 2010 Southern Region Engineering Conference (SREC 2010). Toowoomba, Australia 11 - 12 Nov 2010 Toowoomba, Australia.
Carbon nanotubes for space and bio-engineering applications
Lau, Kin-Tak, Cheung, Hoi-Yan, Lu, Jian Ping, Yin, Yan-Sheng, Hui, David and Li, Hu-Lin. 2008. "Carbon nanotubes for space and bio-engineering applications ." Journal of Computational and Theoretical Nanoscience. 5 (1), pp. 23-35. https://doi.org/10.1166/jctn.2008.003
Interfacial bonding characteristic of nanoclay/polymer composites
Chan, Mo-lin, Lau, Kin-tak, Wong, T. T. and Cardona, Francisco. 2011. "Interfacial bonding characteristic of nanoclay/polymer composites." Applied Surface Science. 258 (2), pp. 860-864. https://doi.org/10.1016/j.apsusc.2011.09.016
The effect of viscoelasticity on fatigue behaviour of polymer matrix composites
Epaarachchi, J. A.. 2011. "The effect of viscoelasticity on fatigue behaviour of polymer matrix composites ." Guedes, Rui Miranda (ed.) Creep and fatigue in polymer matrix composites. Cambridge, United Kingdom. Woodhead Publishing Limited. pp. 492-513
Assessment of damage accumulation in glass fibre reinforced plastic (GFRP) composites under spectrum fatigue loading
Epaarachchi, Jayantha A.. 2006. "Assessment of damage accumulation in glass fibre reinforced plastic (GFRP) composites under spectrum fatigue loading." Hoffman, Mark and Price, John (ed.) 2006 International Conference on Structural Integrity and Failure (SIF2006). Sydney, Australia 27 - 29 Sep 2006 Australia.
Preparation and study of polypropylene/polyethylene terephthalate composite fibres
Si, Xiaojuan, Guo, Linfeng, Wang, Yimin and Lau, Kin-Tak. 2008. "Preparation and study of polypropylene/polyethylene terephthalate composite fibres." Composites Science and Technology. 68 (14), pp. 2943-2947. https://doi.org/10.1016/j.compscitech.2007.11.008
Mechanical and thermal properties of chicken feather fiber/PLA green composites
Cheng, Sha, Lau, Kin-Tak, Liu, Tao, Zhao, Yong-Qing, Lam, Pou-Man and Yin, Yansheng. 2009. "Mechanical and thermal properties of chicken feather fiber/PLA green composites ." Composites Part B: Engineering. 40 (7), pp. 650-654. https://doi.org/10.1016/j.compositesb.2009.04.011
Sliding wear performance of nano-SiO2/short carbon fiber/epoxy hybrid composites
Guo, Qing Bing, Rong, Min Zhi, Jia, Guo Liang, Lau, Kin-Tak and Zhang, Ming Qiu. 2009. "Sliding wear performance of nano-SiO2/short carbon fiber/epoxy hybrid composites ." Wear. 266 (7-8), pp. 658-665. https://doi.org/10.1016/j.wear.2008.08.005
Synthesis of zirconia nanoparticles on carbon nanotubes and their potential for enhancing the fracture toughness of alumina ceramics
Zhu, Yue-Feng, Shi, Lei, Liang, Ji, Hui, David and Lau, Kin-Tak. 2008. "Synthesis of zirconia nanoparticles on carbon nanotubes and their potential for enhancing the fracture toughness of alumina ceramics." Composites Part B: Engineering. 39 (7-8), pp. 1136-1141. https://doi.org/10.1016/j.compositesb.2008.03.006
Fabrication and mechanical properties of exfoliated clay-CNTs/epoxy nanocomposites
Wang, Zhicai, Xu, Cailing, Zhao, Yongqing, Zhao, Dandan, Wang, Zhe, Li, Hulin and Lau, Kin-Tak. 2008. "Fabrication and mechanical properties of exfoliated clay-CNTs/epoxy nanocomposites." Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing. 490 (1-2), pp. 481-487. https://doi.org/10.1016/j.msea.2008.01.040
Mechanical properties of epoxy-based composites using coiled carbon nanotubes
Li, Xiao-Feng, Lau, Kin-Tak and Yin, Yan-Sheng. 2008. "Mechanical properties of epoxy-based composites using coiled carbon nanotubes." Composites Science and Technology. 68 (14), pp. 2876-2881. https://doi.org/10.1016/j.compscitech.2007.10.019
Imparting ultra-low friction and wear rate to epoxy by the incorporation of microencapsulated lubricant?
Guo, Qing Bing, Lau, Kin-Tak, Zheng, Bing Fa, Rong, Min Zhi and Zhang, Ming Qiu. 2009. "Imparting ultra-low friction and wear rate to epoxy by the incorporation of microencapsulated lubricant?" Macromolecular Materials and Engineering. 294 (1), pp. 20-24. https://doi.org/10.1002/mame.200800257
Strain monitoring of RC members strengthened with smart NSM FRP bars
Wang, Bo, Teng, J. G., De Lorenzis, Laura, Zhou, Li-Min, Ou, Jinping, Jin, Wei and Lau, K. T.. 2009. "Strain monitoring of RC members strengthened with smart NSM FRP bars." Construction and Building Materials. 23 (4), pp. 1698-1711. https://doi.org/10.1016/j.conbuildmat.2008.07.027
Acousto-ultrasonic sensing for delaminated GFRP composites using an embedded FBG sensor
Lam, Pou-Man, Lau, Kin-Tak, Ling, Hang-Yin, Su, Zhong-Qing and Tam, Hwa-Yaw. 2009. "Acousto-ultrasonic sensing for delaminated GFRP composites using an embedded FBG sensor." Optics and Lasers in Engineering. 47 (10), pp. 1049-1055. https://doi.org/10.1016/j.optlaseng.2009.01.010
Composite panels for reducing noise in air conditioning and ventilation systems
Choy, Yat-Sze, Lau, Kin-Tak, Wang, C., Chau, C. W., Liu, Yang and Hui, D.. 2009. "Composite panels for reducing noise in air conditioning and ventilation systems." Composites Part B: Engineering. 40 (4), pp. 259-266. https://doi.org/10.1016/j.compositesb.2009.01.004
Change of dynamic response of pultruded composite components used in advanced composite structures due to fatigue and fracture
Epaarachchi, J. A.. 2008. "Change of dynamic response of pultruded composite components used in advanced composite structures due to fatigue and fracture ." Aravinthan, Thiru, Karunasena, Warna and Wang, Hao (ed.) 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM20). Toowoomba, Australia 02 - 05 Dec 2008 London, United Kingdom.
Carbon nanotube-reinforced nanocomposites
Lau, Alan kin-tak. 2011. "Carbon nanotube-reinforced nanocomposites." Lau, Alan kin-tak and Leng, Jinsong (ed.) Multifunctional polymer nanocomposites. Boca Raton, FL. United States. CRC Press. pp. 19-45
Sensors, actuators, and intelligent processing [Preface]
Lau, Kin-Tak, Epaarachchi, Jayantha and Sudarshan, T. S.. 2010. "Sensors, actuators, and intelligent processing [Preface]." Materials and Manufacturing Processes. 25 (4), pp. 211-211. https://doi.org/10.1080/10426910903425036
Biocomposites: their multifunctionality
Lau, Kin-tak, Ho, Mei-po, Au-Yeung, Chi-ting and Cheung, Hoi-yan. 2010. "Biocomposites: their multifunctionality." International Journal of Smart and Nano Materials. 1 (1), pp. 13-27. https://doi.org/10.1080/19475411003589780
Characteristics of a silk fibre reinforced biodegradable plastic
Ho, Mei-Po, Lau, Kin-Tak, Wang, Hao and Bhattacharyya, Debes. 2011. "Characteristics of a silk fibre reinforced biodegradable plastic." Composites Part B: Engineering. 42 (2), pp. 117-122. https://doi.org/10.1016/j.compositesb.2010.10.007
Effects of natural fibre surface on composite properties: a review
Kabir, M. M., Wang, H., Aravinthan, T., Cardona, F. and Lau, K. -T.. 2011. "Effects of natural fibre surface on composite properties: a review." Cowled, Craig J. L. (ed.) 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing (eddBE 2011). Brisbane, Australia 27 - 29 Apr 2011 Brisbane, Australia.
I-V characteristics and electro-mechanical response of different carbon black/epoxy composites
Ji, Xiaoyong, Li, Hui, Hui, David, Hsiao, Kuang-Ting, Ou, Jinping and Lau, Alan K. T.. 2010. "I-V characteristics and electro-mechanical response of different carbon black/epoxy composites." Composites Part B: Engineering. 41 (1), pp. 25-32. https://doi.org/10.1016/j.compositesb.2009.05.001
A shape memory alloy energy absorber for backpack design
Lau, Sindy Mei-Ling, Lau, Kin-Tak, Yin, Yan-Sheng, Li, Lan, Wong, May, Chan, Kevin and Chen, William. 2010. "A shape memory alloy energy absorber for backpack design." Materials and Manufacturing Processes. 25 (4), pp. 281-286. https://doi.org/10.1080/10426910903426471
Optimization of tribological and mechanical properties of epoxy through hybrid filling
Guo, Qing Bing, Lau, Kin-Tak, Rong, Min Zhi and Zhang, Ming Qiu. 2010. "Optimization of tribological and mechanical properties of epoxy through hybrid filling." Wear. 269 (1-2), pp. 13-20. https://doi.org/10.1016/j.wear.2010.03.001
Silkworm silk/poly(lactic acid) biocomposites: dynamic mechanical, thermal and biodegradable properties
Zhao, Yong-Qing, Cheung, Hoi-Yan, Lau, Kin-Tak, Xu, Cai-Ling, Zhao, Dan-Dan and Li, Hu-Lin. 2010. "Silkworm silk/poly(lactic acid) biocomposites: dynamic mechanical, thermal and biodegradable properties." Polymer Degradation and Stability. 95 (10), pp. 1978-1987. https://doi.org/10.1016/j.polymdegradstab.2010.07.015
Thermal behavior of MWNT-reinforced thermoplastic natural rubber nanocomposites
Tarawneh, Mouad. A., Ahmad, Sahrim Hj., Rasid, Rozaidi, Yahya, S. Y., Lau, Kin-tak, Kong, Ing and Noum, Se Yong Eh. 2011. "Thermal behavior of MWNT-reinforced thermoplastic natural rubber nanocomposites." Journal of Reinforced Plastics and Composites. 30 (3), pp. 216-221. https://doi.org/10.1177/0731684410391512
Effect of surface treatment with potassium persulfate on dispersion stability of multi-walled carbon nanotubes
Park, Ok-kyung, Kim, Nam Hoon, Lau, Kin-Tak and Lee, Joong Hee. 2010. "Effect of surface treatment with potassium persulfate on dispersion stability of multi-walled carbon nanotubes." Materials Letters. 64 (6), pp. 718-721. https://doi.org/10.1016/j.matlet.2009.12.048
The electrochemistry corrosion behavior of Fe3Al-type intermetallic with super-hydrophobic surfaces
Liu, Tao, Lau, Kin-Tak, Chen, Shougang, Cheng, Sha, He, Tian and Yin, Yansheng. 2010. "The electrochemistry corrosion behavior of Fe3Al-type intermetallic with super-hydrophobic surfaces." Materials and Manufacturing Processes. 25 (5), pp. 298-301. https://doi.org/10.1080/10426911003747717
Measurement of bovine bone properties through surface indentation technique
Lau, Mei-ling, Lau, Kin-tak, Yao Yeo, Yan-Dong, Au Yeung, Chi-ting and Lee, Joong-hee. 2010. "Measurement of bovine bone properties through surface indentation technique." Materials and Manufacturing Processes. 25 (5), pp. 324-328. https://doi.org/10.1080/10426911003748137
Microscopical observation of the marine bacterium vibrio natriegeus growth on metallic corrosion
Cheng, Sha, Lau, Kin-Tak, Chen, Shougang, Chang, Xueting, Liu, Tao and Yin, Yansheng. 2010. "Microscopical observation of the marine bacterium vibrio natriegeus growth on metallic corrosion." Materials and Manufacturing Processes. 25 (5), pp. 293-297. https://doi.org/10.1080/10426911003747642
Polymer membranes for high temperature proton exchange membrane fuel cell: recent advances and challenge
Bose, Saswata, Kuila, Tapas, Nguyen, Thi Xuan Hien, Kim, Nam Hoon, Lau, Kin-tak and Lee, Joong Hee. 2011. "Polymer membranes for high temperature proton exchange membrane fuel cell: recent advances and challenge." Progress in Polymer Science. 36 (6), pp. 813-843. https://doi.org/10.1016/j.progpolymsci.2011.01.003
Response Fibre Bragg Grating (FBG) strain sensors embedded at different locations through the thickness around a delamination in a composite lamina
Epaarachchi, Jayantha A., Rathnaweera, Gayan, Canning, John and Stevenson, Michael. 2010. "Response Fibre Bragg Grating (FBG) strain sensors embedded at different locations through the thickness around a delamination in a composite lamina." 7th Asian-Australasian Conference on Composites (ACCM7). Taipei, Taiwan 15 - 18 Nov 2010 Taipei, Taiwan.
Study on the mechanical properties of different silkworm silk fibers
Cheung, Hoi-Yan, Ho, Mei-po, Lau, Kin-tak and Mosallam, Ayman. 2009. "Study on the mechanical properties of different silkworm silk fibers." Journal of Composite Materials. 43 (22), pp. 2521-2531. https://doi.org/10.1177/0021998309345347
Performance of aluminium/vinylester particulate composite
Epaarachchi, Jayantha A. and Reushle, Matthew T.. 2010. "Performance of aluminium/vinylester particulate composite." Nie, Jian-Feng and Morton, Allan (ed.) PRICM7: 7th Pacific Rim International Conference on Advanced Materials and Processing. Cairns, Australia 02 - 06 Aug 2010 Zurich, Switzerland. https://doi.org/10.4028/www.scientific.net/MSF.654-656.2656
Biodegradation of a silkworm silk/PLA composite
Cheung, Hoi-Yan, Lau, Kin-Tak, Pow, Yu-Fung, Zhao, Yong-Qing and Hui, David. 2010. "Biodegradation of a silkworm silk/PLA composite." Composites Part B: Engineering. 41 (3), pp. 223-228. https://doi.org/10.1016/j.compositesb.2009.09.004
An investigation of spectral response of embedded Fibre Bragg Grating (FBG) sensors in a hollow composite cylindrical beam under pure torsion and combined loading
Kahandawa, Gayan C., Epaarachchi, Jayantha A., Wang, Hao, Followell, David, Birt, Peter, Canning, John and Stevenson, Michael. 2010. "An investigation of spectral response of embedded Fibre Bragg Grating (FBG) sensors in a hollow composite cylindrical beam under pure torsion and combined loading." Teh, Kian, Davies, Ian and Howard, Ian (ed.) 6th Australasian Congress on Applied Mechanics (ACAM 6). Perth, Western Australia 12 - 15 Dec 2010 Perth, Australia.
Effects of the self distortions of embedded FBG sensors on spectral response due to torsional and combined loads
Kahandawa, Gayan C., Epaarachchi, Jayantha A., Wang, Hao and Canning, John. 2010. "Effects of the self distortions of embedded FBG sensors on spectral response due to torsional and combined loads." 3rd Asia-Pacific Workshop on Structural Health Monitoring (APWSHM 2010). Tokyo, Japan 30 Nov - 02 Dec 2010 Tokyo, Japan.
In-situ synthesis and characterization of electrically conductive polypyrrole/graphene nanocomposites
Bose, Saswata, Kuila, Tapas, Uddin, Md. Elias, Kim, Nam Hoon, Lau, Alan K. T. and Lee, Joong Hee. 2010. "In-situ synthesis and characterization of electrically conductive polypyrrole/graphene nanocomposites." Polymer. 51 (25), pp. 5921-5928. https://doi.org/10.1016/j.polymer.2010.10.014
Nanodiamond/poly (lactic acid) nanocomposites: effect of nanodiamond on structure and properties of poly (lactic acid)
Zhao, Yong-Qing, Lau, Kin-Tak, Kim, Jang-Kyo, Xu, Cai-Ling, Zhao, Dan-Dan and Li, Hu-Lin. 2010. "Nanodiamond/poly (lactic acid) nanocomposites: effect of nanodiamond on structure and properties of poly (lactic acid)." Composites Part B: Engineering. 41 (8), pp. 646-653. https://doi.org/10.1016/j.compositesb.2010.09.003
The response of embedded NIR (830 nm) fiber Bragg grating sensors in glass fiber composites under fatigue loading
Epaarachchi, Jayantha A., Canning, John and Stevenson, Michael. 2010. "The response of embedded NIR (830 nm) fiber Bragg grating sensors in glass fiber composites under fatigue loading." Journal of Composite Materials. 44 (7), pp. 809-819. https://doi.org/10.1177/0021998309346382
Dynamic behaviour of laterally loaded pultruted composite beams
Epaarachchi, Jayantha A. and Birt, Peter. 2009. "Dynamic behaviour of laterally loaded pultruted composite beams." Dyckmans, Gunther (ed.) 9th International Conference of the Mechanical and Physical Behaviour of Materials Under Dynamic Loading (DYMAT 2009). Brussels, Belgium 07 - 11 Sep 2009 France.
Effects of static fatigue on the tension-tension fatigue life of glass / polyester composites
Epaarachchi, Jayantha A.. 2005. "Effects of static fatigue on the tension-tension fatigue life of glass / polyester composites." Xie, Mike, Mouritz, Adrian, Khatibi, Akbar Afaghi, Gardiner, Craig and Chiu, Wing Kong (ed.) 4th Australasian Congress on Applied Mechanics (ACAM 2005). Melbourne, Australia 16 - 18 Feb 2005 North Melbourne, Vic, Australia.
Natural fibre-reinforced composites for bioengineering and environmental engineering
Cheung, Hoi-Yan, Ho, Mei-Po, Lau, Kin-Tak, Cardona, Francisco and Hui, David. 2009. "Natural fibre-reinforced composites for bioengineering and environmental engineering." Composites Part B: Engineering. 40 (7), pp. 655-663. https://doi.org/10.1016/j.compositesb.2009.04.014
Special Section: Design of Nonomaterials and Nanostructures [Foreword]
Lau, Kin-Tak, Wang, Hao and Yin, Yansheng. "Special Section: Design of Nonomaterials and Nanostructures [Foreword]." Materials and Design. 31 (4), pp. 1657-1657. https://doi.org/10.1016/j.matdes.2009.07.051
A simplified empirical model for prediction of mechanical properties of random short fiber/vinylester composites
Epaarachchi, J., Ku, H. and Gohel, K.. 2010. "A simplified empirical model for prediction of mechanical properties of random short fiber/vinylester composites." Journal of Composite Materials. 44 (6), pp. 779-788. https://doi.org/10.1177/0021998309346383
Investigation of dynamic behaviour of a hybrid composite bridge girder
Epaarachchi, Jayantha A., Karunasena, Warna and Aravinthan, Thiru. 2007. "Investigation of dynamic behaviour of a hybrid composite bridge girder." Marshall, Ian (ed.) 14th International Conference on Composite Structures (ICCS 14). Melbourne, Australia 19 - 21 Nov 2007 Melbourne, Australia.
An investigation of the response of embedded near infrared fibre bragg grating (FBG) sensors (830nm) in glass fibre composites under fatigue loading
Epaarachchi, Jayantha A., Canning, John and Stevenson, Michael. 2007. "An investigation of the response of embedded near infrared fibre bragg grating (FBG) sensors (830nm) in glass fibre composites under fatigue loading." Marshall, Ian (ed.) 14th International Conference on Composite Structures (ICCS 14). Melbourne, Australia 19 - 21 Nov 2007 Melbourne, Australia.
Investigation of the use of near infrared FBG (830nm) sensors for monitoring the structural response of 0/90 woven cloth/CSM glass fibre/vynylester composite under static and fatigue loading
Epaarachchi, Jayantha A., Clegg, Richard E. and Canning, John. 2007. "Investigation of the use of near infrared FBG (830nm) sensors for monitoring the structural response of 0/90 woven cloth/CSM glass fibre/vynylester composite under static and fatigue loading." HUMS 2007: 5th DSTO International Conference on Health and Usage Monitoring . Melbourne, Australia 19 - 22 Mar 2007 Australia.
An experimental investigation of the properties of cross-ply laminate used for manufacturing of small aircraft components
Epaarachchi, Jayantha A. and Clegg, Richard. 2006. "An experimental investigation of the properties of cross-ply laminate used for manufacturing of small aircraft components." Composite Structures. 75 (1-4), pp. 93-99. https://doi.org/10.1016/j.compstruct.2006.04.080
A study of estimation of damage accumulation of glass fibre reinforce plastic (GFRP) composites under a block loading situation
Epaarachchi, Jayantha A.. 2006. "A study of estimation of damage accumulation of glass fibre reinforce plastic (GFRP) composites under a block loading situation." Composite Structures. 75 (1-4), pp. 88-92. https://doi.org/10.1016/j.compstruct.2006.04.063
The development of a fatigue loading spectrum for small wind turbine blades
Epaarachchi, Jayantha A. and Clausen, Philip D.. 2006. "The development of a fatigue loading spectrum for small wind turbine blades." Journal of Wind Engineering and Industrial Aerodynamics. 94, pp. 207-223. https://doi.org/10.1016/j.jweia.2005.12.007
Effects of static-fatigue (tension) on the tension-tension fatigue life of glass fibre reinforced plastic composites
Epaarachchi, Jayantha A.. 2006. "Effects of static-fatigue (tension) on the tension-tension fatigue life of glass fibre reinforced plastic composites." Composite Structures. 74 (4), pp. 419-425. https://doi.org/10.1016/j.compstruct.2005.04.022
A new cumulative fatigue damage model for glass fibre reinforced plastic composites under step/discrete loading
Epaarachchi, Jayantha A. and Clausen, Philip D.. 2005. "A new cumulative fatigue damage model for glass fibre reinforced plastic composites under step/discrete loading." Composites Part A: Applied Science and Manufacturing. 36 (9), pp. 1236-1245. https://doi.org/10.1016/j.compositesa.2005.01.021
An empirical model for fatigue behavior prediction of glass fibre-reinforced plastic (GFRP) composites for various stress ratios and test frequencies
Epaarachchi, Jayantha A. and Clausen, Philip D.. 2003. "An empirical model for fatigue behavior prediction of glass fibre-reinforced plastic (GFRP) composites for various stress ratios and test frequencies." Composites Part A: Applied Science and Manufacturing. 34 (4), pp. 313-326. https://doi.org/10.1016/S1359-835X(03)00052-6