Flammability characteristics of chemical treated woven hemp fabric

Article


Misnon, Mohd Iqbal, Islam, Md Mainul, Epaarachchi, Jayantha Ananda, Chen, Haizhen, Goda, Koichi and Khan, Md Tawhidul Islam. 2018. "Flammability characteristics of chemical treated woven hemp fabric." Advances in Materials Science and Engineering. 5 (1), pp. 1-20. https://doi.org/10.5121/msej.2018.5101
Article Title

Flammability characteristics of chemical treated woven hemp fabric

ERA Journal ID44448
Article CategoryArticle
AuthorsMisnon, Mohd Iqbal (Author), Islam, Md Mainul (Author), Epaarachchi, Jayantha Ananda (Author), Chen, Haizhen (Author), Goda, Koichi (Author) and Khan, Md Tawhidul Islam (Author)
Journal TitleAdvances in Materials Science and Engineering
Journal Citation5 (1), pp. 1-20
Number of Pages20
Year2018
PublisherHindawi Publishing Corporation
Place of PublicationNew York, NY. United States
ISSN1687-8434
1687-8442
Digital Object Identifier (DOI)https://doi.org/10.5121/msej.2018.5101
Web Address (URL)https://airccse.com/msej/papers/5118msej01.pdf
Abstract

Woven hemp fabric was treated with sodium hydroxide, commercial flame retardant chemical, and combination of both to increase its fire-retardant properties. Treatments of fire-retardant changed the properties of woven hemp fabric such as increased its fabric shrinkage and density of fibres which ranges from 0.67 to 5% and 1.43 to 1.53 g/cm3 respectively. After the treatment, the fire retardancy of the fabric increased tremendously which was observed by the burning, thermogravimetry and limiting oxygen index tests. Some of the samples were not burnt when exposed to flame source and the burning rate needed to be measured under exaggeration of flame at longer time. The limiting oxygen index value increased from 18.6 to 51 after the treatments which explained the scenario happened in the burning tests. Nevertheless, its
mechanical properties decreased slightly that ranges from 18 to 32% and 23 to 39% for warp and weft respectively compared to untreated fibre.

Keywordswoven hemp fabric, fire retardant properties, fabric properties, themogravimetry, limiting oxygen index & burning tests
ANZSRC Field of Research 2020401602. Composite and hybrid materials
Public Notes

File reproduced in accordance with the copyright policy of the publisher/author.

Byline AffiliationsCentre for Future Materials
Zhejiang Textile and Fashion College, China
Yamaguchi University, Japan
Saga University, Japan
Institution of OriginUniversity of Southern Queensland
Permalink -

https://research.usq.edu.au/item/q4x81/flammability-characteristics-of-chemical-treated-woven-hemp-fabric

Download files


Published Version
Published.pdf
File access level: Anyone

  • 541
    total views
  • 214
    total downloads
  • 8
    views this month
  • 23
    downloads this month

Export as

Related outputs

Computer-aided feature recognition of CFRP plates based on real-time strain fields reflected from FBG measured signals
Wang, Hua-Ping, Ni, Yi-Qing, Chen, Cong, Jayawickrema, Minol and Epaarachchi, Jayantha. 2023. "Computer-aided feature recognition of CFRP plates based on real-time strain fields reflected from FBG measured signals." Composites Part B: Engineering. 263. https://doi.org/10.1016/j.compositesb.2023.110866
Optical Fibre Sensing and Deep Learning-Based Disaster and Climate Change Risk Assessments of Civil Infrastructure: Current Status and Future Perspective
Anjana, R. W. K., Herath, H. M. C., Jayawickrema, U. M. N. and Epaarachchi, J. A.. 2023. "Optical Fibre Sensing and Deep Learning-Based Disaster and Climate Change Risk Assessments of Civil Infrastructure: Current Status and Future Perspective." 13th International Conference on Sustainable Built Environment. Kandy, Sri Lanka 16 - 18 Dec 2022 Singapore . Springer. https://doi.org/10.1007/978-981-99-3471-3_33
Development of exfoliated mica waste/natural rubber composites by latex stage mixing
Somarathna, Y.R., Rathnayake, G.L.H., Rupasinghe, P.S.V., Samarasinghe, I.H.K., Sudusingha, Y.C.Y., Siriwardena, S. and Epaarachchi, J.A.. 2023. "Development of exfoliated mica waste/natural rubber composites by latex stage mixing." Polymer-Plastics Technology and Materials. 62 (16), pp. 2143-2158. https://doi.org/10.1080/25740881.2023.2252894
Light and Shape-Memory Polymers: Characterization, Preparation, Stimulation, and Application
Fang, Liang, Yan, Wan, Chen, Shunping, Duan, Qiong, Herath, Madhubhashitha, Epaarachchi, Jayantha, Liu, Yue and Lu, Chunhua. 2023. "Light and Shape-Memory Polymers: Characterization, Preparation, Stimulation, and Application." Macromolecular Materials and Engineering. 308 (12). https://doi.org/10.1002/mame.202300158
Thermo-Mechanical Behavior of Green Sandwich Structures for Building and Construction Applications
Hossain, Forhad, Arifuzzaman, Md, Islam, Md Shariful and Islam, Md Mainul. 2023. "Thermo-Mechanical Behavior of Green Sandwich Structures for Building and Construction Applications." Processes. 2023 (11). https://doi.org/10.3390/pr11082456
Impact of Spectral Shift Quality (SSQ) on Fibre Optic Sensor Readings in Reinforced Concrete Beams
Udagedara, U. M. N., Herath, H. M. C. M., Henarachchi, N. K., Sooriyaarachchi, H. P., Banerjee, S. and Epaarachchi, J. A.. 2023. "Impact of Spectral Shift Quality (SSQ) on Fibre Optic Sensor Readings in Reinforced Concrete Beams." 14th International Workshop on Structural Health Monitoring. Stanford University, Stanford, CA 12 - 14 Sep 2023 United States. DEStech Publications, Inc.
Sensory methods and machine learning based damage identification of fibre-reinforced composite structures: An introductory review
Bandara, Senaka, Herath, Madhubhashitha and Epaarachchi, Jayantha. 2023. "Sensory methods and machine learning based damage identification of fibre-reinforced composite structures: An introductory review." Journal of Reinforced Plastics and Composites. 42 (21-22), pp. 1119-1146. https://doi.org/10.1177/07316844221145972
Shape memory polymer composite circular and square hollow members for deployable structures
Emmanuel, K.D.C., Jeewantha, L.H.J., Herath, H.M.C.M., Epaarachchi, J.A. and Aravinthan, T.. 2023. "Shape memory polymer composite circular and square hollow members for deployable structures ." Composites Part A: Applied Science and Manufacturing. 171. https://doi.org/10.1016/j.compositesa.2023.107559
Investigation of Gas Release from Recycled Plastic Shopping Bags during Melting at Low Temperatures
Eberhard, Susette, Bowtell, Les, Lenske, Brian and Islam, Mainul. 2023. "Investigation of Gas Release from Recycled Plastic Shopping Bags during Melting at Low Temperatures." Advances in Materials Science and Engineering. 2023, pp. 1-9. https://doi.org/10.1155/2023/2378231
Enhancement of the Mechanical and Thermal Properties of Polypropylene and Nylon 6.6 Composite Blends
Al-Haik, Mohammad Yousef, Aldajah, Saud Hamad, Kabir, Mohammad Mazedul, Siddique, Waseem Ahmad, Haik, Yousef and Islam, Md Mainul. 2023. "Enhancement of the Mechanical and Thermal Properties of Polypropylene and Nylon 6.6 Composite Blends." Advances in Materials Science and Engineering. 2023. https://doi.org/10.1155/2023/6535067
Durability and long-term behaviour of shape memory polymers and composites for the space industry - A review of current status and future perspectives
Jayalath, Sandaruwan, Herath, Madhubhashitha, Epaarachchi, Jayantha, Trifoni, Eduardo, Gdoutos, Eleftherios E. and Fang, Liang. 2023. "Durability and long-term behaviour of shape memory polymers and composites for the space industry - A review of current status and future perspectives ." Polymer Degradation and Stability. 211. https://doi.org/10.1016/j.polymdegradstab.2023.110297
The use of fibre reinforced polymer composites for construction of structural supercapacitors: a review
Anurangi, Jayani, Herath, Madhubhashitha, Galhena, Dona T.L. and Epaarachchi, Jayantha. 2023. "The use of fibre reinforced polymer composites for construction of structural supercapacitors: a review ." Advanced Composite Materials. 32 (6), pp. 942-986. https://doi.org/10.1080/09243046.2023.2180792
Strain patterns of short span reinforced concrete beams under flexural loading: A comparison between distributed sensing and concrete damaged plasticity modelling
Udagedara, Minol, Kumar, Arjun, Herath, Madhubhashitha, Hettiarachchi, Nandita, Sooriyaarachchi, Harsha and Epaarachchi, Jayantha. 2023. "Strain patterns of short span reinforced concrete beams under flexural loading: A comparison between distributed sensing and concrete damaged plasticity modelling." Journal of Intelligent Material Systems and Structures. 34 (10), p. 1123–1135. https://doi.org/10.1177/1045389X221128764
Damage onset analysis of optimized shape memory polymer composites during programming into curved shapes
Emmanuel, K. D. C., Jeewantha, L. H. J., Herath, H. M. C. M., Epaarachchi, J. A. and Aravinthan, T.. 2022. "Damage onset analysis of optimized shape memory polymer composites during programming into curved shapes." Materialia. 26, pp. 1-11. https://doi.org/10.1016/j.mtla.2022.101599
Fibre-optic sensor and deep learning-based structural health monitoring systems for civil structures: A review
Jayawickrema, U. M. N., Herath, H. M. C. M., Hettiarachchi, N. K., Sooriyaarachchi, H. P. and Epaarachchi, J. A.. 2022. "Fibre-optic sensor and deep learning-based structural health monitoring systems for civil structures: A review." Measurement. 199, pp. 1-31. https://doi.org/10.1016/j.measurement.2022.111543
Shape memory polymer smart plaster for orthopaedic treatments
Jeewantha, Janitha, Jayalath, Sandaruwan, Emmanuel, Chris, Herath, Madhubhashitha, Forster, Elizabeth, Islam, Mainul, Leng, Jinsong and Epaarachchi, Jayantha. 2022. "Shape memory polymer smart plaster for orthopaedic treatments." Smart Materials and Structures. 31 (11), pp. 1-14. https://doi.org/10.1088/1361-665X/ac943b
Early research of shape memory polymer vascular stents
Jeewantha, Lama Hewage Janitha, Epaarachchi, Jayantha Ananda, Forster, Elizabeth, Islam, Mainul and Leng, Jinsong. 2022. "Early research of shape memory polymer vascular stents." Express Polymer Letters. 16 (9), pp. 902-923. https://doi.org/10.3144/expresspolymlett.2023.49
Distributed sensing based real-time process monitoring of shape memory polymer components
Herath, Madhubhashitha, Emmanuel, Chris, Jeewantha, Janitha, Epaarachchi, Jayantha and Leng, Jinsong. 2022. "Distributed sensing based real-time process monitoring of shape memory polymer components." Journal of Applied Polymer Science. 139 (22). https://doi.org/10.1002/app.52247
Investigation of curing kinetics and internal strains to enhance performances of bisphenol A based shape memory polymers
Jeewantha, L. H. J., Emmanuel, K. D. C., Herath, H. M. C. M., Epaarachchi, J. A., Islam, M. M. and Leng, J.. 2022. "Investigation of curing kinetics and internal strains to enhance performances of bisphenol A based shape memory polymers." Materialia. 21. https://doi.org/10.1016/j.mtla.2021.101264
Surface-Mounted Distributed Fiber Optic Sensor Measurements, and Concrete Damaged Plasticity Modeling for Damage Analysis of Reinforced Concrete Beams
Jayawickrema, U. M. N., Kumar, A. S., Herath, H. M. C. M., Hettiarachchi, N. K., Sooriyaarachchi, H. P. and Epaarachchi, J. A.. 2021. "Surface-Mounted Distributed Fiber Optic Sensor Measurements, and Concrete Damaged Plasticity Modeling for Damage Analysis of Reinforced Concrete Beams." ASME 2021 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS2021). United States and Online United States. https://doi.org/10.1115/SMASIS2021-67524
In-situ performance evaluation of large shape memory polymer components via distributed optical fibre sensors
Herath, Madhubhashitha, Emmanuel, Chris, Epaarachchi, Jayantha and Jeewantha, Janitha. 2021. "In-situ performance evaluation of large shape memory polymer components via distributed optical fibre sensors." 10th International Conference on Information and Automation for Sustainability (ICIAfS 2021). Negambo, Sri Lanka 11 - 13 Aug 2021 United States. https://doi.org/10.1109/ICIAfS52090.2021.9605868
Development and characterization of shape memory polymers for non-invasive biomedical applications
Jeewantha, Janitha, Emmanuel, Chris, Herath, Madhubhashitha, Islam, Mainul and Epaarachchi, Jayantha. 2021. "Development and characterization of shape memory polymers for non-invasive biomedical applications." ASME 2021 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS2021). United States and Online New York, United States. https://doi.org/10.1115/SMASIS2021-66024
Shape memory polymer composites and their smart structural applications
Herath, Madhubhashitha and Epaarachchi, Jayantha. 2021. "Shape memory polymer composites and their smart structural applications." Low, It-Meng and Dong, Yu (ed.) Composite materials: manufacturing, properties and applications. Netherlands. Elsevier. pp. 581-610
Fabric Parameter Effect on the Mechanical Properties of Woven Hemp Fabric Reinforced Composites as an Alternative to Wood Products
Misnon, I. M., Islam, M. M., Epaarachchi, J. A., Lau, K. T. and Wang, H.. 2016. "Fabric Parameter Effect on the Mechanical Properties of Woven Hemp Fabric Reinforced Composites as an Alternative to Wood Products." Advance Research in Textile Engineering. 1 (1).
Multi-attribute parametric optimisation of shape memory polymer properties for adaptive orthopaedic plasters
Jeewantha, L. H. J., Emmanuel, K. D. C., Herath, H. M. C. M., Islam, M. M., Fang, L. and Epaarachchi, J. A.. 2022. "Multi-attribute parametric optimisation of shape memory polymer properties for adaptive orthopaedic plasters." Materialia. 21, pp. 1-12. https://doi.org/10.1016/j.mtla.2022.101325
Effect of hemp fibre surface treatment on the fibre-matrix interface and the influence of cellulose, hemicellulose and lignin contents on composite strength properties
Kabir, Mohammad Mazedul, Alhaik, Mohammad Yousef, Aldajah, Saud Hamad, Lau, Kin Tak, Wang, Hao and Islam, Md Mainul. 2021. "Effect of hemp fibre surface treatment on the fibre-matrix interface and the influence of cellulose, hemicellulose and lignin contents on composite strength properties." Advances in Materials Science and Engineering. 2021, pp. 1-17. https://doi.org/10.1155/2021/9753779
Numerical Study of an Improved Non-Circular MC Fuelled with H/Air for Thermo-Photovoltaic (TPV) Applications
Ayad, Kakei A., Khdher, Abdolbaqi Mohammed, Albazzaz, Kamal Jalal Tawfeeq, Kakahy, Amer Najat Najmaldeen, Abdulkarim, Ali Hussein and Epaarachchi, Jayantha. 2022. "Numerical Study of an Improved Non-Circular MC Fuelled with H/Air for Thermo-Photovoltaic (TPV) Applications." Mathematical Modelling of Engineering Problems. 9 (4), pp. 897-905. https://doi.org/10.18280/mmep.090406
Cyanate esters as a high performing shape memory polymer: A review
Jayalath, H.T.S., Herath, Madhubhashitha and Epaarachchi, Jayantha. 2022. "Cyanate esters as a high performing shape memory polymer: A review." 3rd International Conference on Aspects of Materials Science and Engineering (ICAMSE2022). Chandigarh, India 04 - 05 Mar 2022 Netherlands. Elsevier. https://doi.org/10.1016/j.matpr.2022.02.121
Effects of Ligands in Rare Earth Complex on Properties, Functions, and Intelligent Behaviors of Polyurea–Urethane Composites
Zhou, Lu, Yang, Hongwei, Zhang, Zhen, Liu, Yue, Epaarachchi, Jayantha, Fang, Zhenggang, Fang, Liang, Lu, Chunhua and Xu, Zhongzi. 2022. "Effects of Ligands in Rare Earth Complex on Properties, Functions, and Intelligent Behaviors of Polyurea–Urethane Composites." Polymer. 14 (10), pp. 1-16. https://doi.org//10.3390/polym14102098
Effect of dispersion time for nanoparticles in DGEBA shape memory polymer composite fabrication
Islam, Mainul. 2022. "Effect of dispersion time for nanoparticles in DGEBA shape memory polymer composite fabrication." Sapuan, S. M. et al. (ed.) International Symposium on Polymeric Materials 2022 (ISPM2022). Malaysia 14 - 15 Jun 2022 Malaysia.
Evaluating the temperature and glass fibre reinforcement effects on the damping properties of the shape memory polymers
Al Azzawi, Wessam, Epaarachchi, Jayantha A. and Leng, Jinsong. 2017. "Evaluating the temperature and glass fibre reinforcement effects on the damping properties of the shape memory polymers." 21st International Conference on Composite Materials (ICCM-21). Xi’an, China 20 - 25 Aug 2017 China.
Carbon fibre reinforced shape memory polymer composites for deployable space habitats
Herath, H. M. C. M., Epaarachchi, J. A., Islam, M. M. and Leng, J.. 2019. "Carbon fibre reinforced shape memory polymer composites for deployable space habitats." Engineer: Journal of the Institution of Engineers. LII (1), pp. 1-9. https://doi.org/10.4038/engineer.v52i1.7323
Failure analysis and design of grouted fibre-composite repair system for corroded steel pipes
Shamsuddoha, Md, Manalo, Allan, Aravinthan, Thiru, Islam, Md Mainul and Djukic, Luke. 2021. "Failure analysis and design of grouted fibre-composite repair system for corroded steel pipes." Engineering Failure Analysis. 119, pp. 1-15. https://doi.org/10.1016/j.engfailanal.2020.104979
Thermomechanical and fire performance of DGEBA based shape memory polymer composites for constructions
Emmanuel, K. D. C., Herath, H. M. C. M., Jeewantha, L. H. J., Epaarachchi, J. A. and Aravinthan, T.. 2021. "Thermomechanical and fire performance of DGEBA based shape memory polymer composites for constructions." Construction and Building Materials. 303. https://doi.org/10.1016/j.conbuildmat.2021.124442
Development of Smart Materials for Invasive Medical Applications Using Shape Memory Polymers
Jeewantha, Lama Hewage Janitha, Islam, Md Mainul and Epaarachchi, Jayantha Ananda. 2020. "Development of Smart Materials for Invasive Medical Applications Using Shape Memory Polymers." 6th International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE 2020). Khulna, Bangladesh 19 - 21 Dec 2020 Bangladesh.
Monitoring Structural Performances of Concrete Beams Using Fibre Bragg Grating (FBG) Sensors
Jayawickrema, U. M. N., Epaarachchi, J. A., Hettiarachchi, N. K., Jeewantha, L. H. J. and Herath, H. M. C. M.. 2019. "Monitoring Structural Performances of Concrete Beams Using Fibre Bragg Grating (FBG) Sensors." 10th International Conference on Structural Engineering and Construction Management (ICSECM 2019). Kandy, Sri Lanka 12 - 14 Dec 2019
Flexural Analysis for Syntactic Foam Sandwich Panels
Salleh, Zulzamri, Islam, M., Epaarachchi, J., Zulkarnain, M. and Ahmed, Yaseen Adenan. 2020. "Flexural Analysis for Syntactic Foam Sandwich Panels." Saw, Chun Lin, Woo, Tze Keong, Singh, Salvinder Singh a/l Karam and Salim, Didi Asmara Bin (ed.) Regional Conference on Marine and Mechanical Engineering (ReMME'18). Ipoh, Malaysia 07 - 09 Nov 2018 Singapore. https://doi.org/10.1007/978-981-15-0002-2_5
Behaviour of continuous fibre composite sandwich core under low-velocity impact
Zangana, Sartip, Epaarachchi, Jayantha, Ferdous, Wahid, Leng, Jinsong and Schubel, Peter. 2021. "Behaviour of continuous fibre composite sandwich core under low-velocity impact." Thin-Walled Structures. 158, pp. 1-11. https://doi.org/10.1016/j.tws.2020.107157
Effect of thickness on the shape memory properties of bisphenol a epoxy based shape memory polymer composites
Emmanue, K. D. C., Jeewantha, J., Herath, M., Epaarachchi J. and Aravinthan T.. 2021. "Effect of thickness on the shape memory properties of bisphenol a epoxy based shape memory polymer composites." ASME 2021 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS2021). United States and Online United States. https://doi.org/10.1115/SMASIS2021-67111
Mechanical and thermal properties of glass fiber–vinyl ester resin composite for pipeline repair exposed to hot-wet conditioning
Shamsuddoha, Md, Djukic, Luke P., Islam, Md Mainul, Aravinthan, Thiru and Manalo, Allan. 2017. "Mechanical and thermal properties of glass fiber–vinyl ester resin composite for pipeline repair exposed to hot-wet conditioning." Journal of Composite Materials. 51 (11), pp. 1605-1617. https://doi.org/10.1177/0021998316661869
Recent Progress in Shape Memory Polymers in Biomedical Applications
Jeewantha, Lama Hewage Janitha, Islam, Md Mainul and Epaarachchi, Jayantha Amanda. 2019. "Recent Progress in Shape Memory Polymers in Biomedical Applications." Yang, Richard, Zhang, Leo, Zhao, Ming, Fang, Gu and Islam, Rafiqul (ed.) 1st International Conference on Mechanical and Manufacturing Engineering Research and Practice (iCMMERP-2019). Sydney, Australia 24 - 28 Nov 2019 Sydney, Australia.
Light activated shape memory polymers and composites: A review
Herath, Madhubhashitha, Epaarachchi, Jayantha, Islam, Mainul, Fang, Liang and Leng, Jinsong. 2020. "Light activated shape memory polymers and composites: A review." European Polymer Journal. 136, pp. 1-27. https://doi.org/10.1016/j.eurpolymj.2020.109912
Effects of Different Relative Humidities on Flax Fibers prior to Manufacturing Their Composites Based on the Shear Response
Moudood, Abdul, Rahman, Anisur, Ochsner, Andreas, Islam, Md Mainul, Ali, Mohammad Yeakub and Francucci, Gaston. 2020. "Effects of Different Relative Humidities on Flax Fibers prior to Manufacturing Their Composites Based on the Shear Response." Advances in Materials Science and Engineering. 2020, pp. 1-7. https://doi.org/10.1155/2020/4785970
Mechanical properties of flax fiber‐reinforced composites at different relative humidities: Experimental, geometric, and displacement potential function approaches
Moudood, Abdul, Rahman, Anisur, Huq, Nayeem Md Lutful, Ochsner, Andreas, Islam, Md Mainul and Francucci, Gaston. 2020. "Mechanical properties of flax fiber‐reinforced composites at different relative humidities: Experimental, geometric, and displacement potential function approaches." Polymer Composites. 41 (12), pp. 4963-4973. https://doi.org/10.1002/pc.25766
Performance investigation of two AE source location techniques on a Planar Multilayer Structure
Hassan, Md. Mehedi, Khan, Md. Tawhidul Islam, Hasemura, Yuji and Islam, Md. Mainul. 2020. "Performance investigation of two AE source location techniques on a Planar Multilayer Structure." International Journal of Acoustics and Vibration. 25 (2), pp. 226-235. https://doi.org/10.20855/ijav.2020.25.21635
Performance of rare earth organic complexes based light activated shape memory polymer composites
Herath, Madhubhashitha, Epaarachchi, Jayantha, Islam, Mainul, Fang, Liang, Zhang, Fenghua and Leng, Jinsong. 2019. "Performance of rare earth organic complexes based light activated shape memory polymer composites." 22nd International Conference on Composite Materials (ICCM-22). Melbourne, Australia 11 - 16 Aug 2019 Australia.
Remote actuation of light activated shape memory polymers via D-shaped optical fibres
Herath, Madhubhashitha, Epaarachchi, Jayantha, Islam, Mainul, Zhang, Fenghua, Leng, Jinsong, Fang, Liang, Yan, Cheng, Peng, Gang Ding and Schade, Wolfgang. 2020. "Remote actuation of light activated shape memory polymers via D-shaped optical fibres." Smart Materials and Structures. 29 (4), pp. 1-8. https://doi.org/10.1088/1361-665X/ab72ea
4D printed shape memory polymer composite structures for deployable small spacecrafts
Herath, Madhubhashitha, Islam, Mainul, Epaarachchi, Jayantha, Zhang, Fenghua and Leng, Jinsong. 2019. "4D printed shape memory polymer composite structures for deployable small spacecrafts." ASME 2019 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS 2019). Louisville, United States 09 - 11 Sep 2019 United States. https://doi.org/10.1115/SMASIS2019-5583
Mechanical properties and thermomechanical behaviour of poly (ethylene-co-vinyl acetate) based shape memory polymer composites
Herath, M., James, G. and Epaarachchi, J.. 2019. "Mechanical properties and thermomechanical behaviour of poly (ethylene-co-vinyl acetate) based shape memory polymer composites." 13th International Conference on the Mechanical Behaviour of Materials (ICM13). Melbourne, Australia 11 - 14 Jun 2019 Melbourne, Australia.
A novel hybridised composite sandwich core with glass, kevlar and zylon fibres – investigation under low-velocity impact
Zanagan, Sartip, Epaarachchi, Jayantha, Ferdous, Wahid and Leng, Jinsong. 2020. "A novel hybridised composite sandwich core with glass, kevlar and zylon fibres – investigation under low-velocity impact." International Journal of Impact Engineering. 137, pp. 1-10. https://doi.org/10.1016/j.ijimpeng.2019.103430
Near infrared light activated shape memory polymer composite for space applications
Herath, Madhubhashitha, Epaarachchi, Jayantha, Islam, Mainul and Leng, Jinsong. 2018. "Near infrared light activated shape memory polymer composite for space applications." Wang, Hao (ed.) 11th Asian-Australasian Conference on Composite Materials (ACCM-11). Cairns, Australia 29 Jul - 01 Aug 2018
Compression and flexural properties of ground macadamia nutshell particulate composites
Bode, Rajesh Reddy, Islam, Md Mainul and Mahmood, Muhammad Nateque. 2018. "Compression and flexural properties of ground macadamia nutshell particulate composites." Wang, Hao (ed.) 11th Asian-Australasian Conference on Composite Materials (ACCM-11). Cairns, Australia 29 Jul - 01 Aug 2018
Light-induced rare earth organic complex/shape-memory polymer composites with high strength and luminescence based on hydrogen bonding
Wang, Hangning, Fang, Liang, Zhang, Zhen, Epaarachchi, Jayantha, Li, Lingyu, Hu, Xin, Lu, Chunhua and Xu, Zhongzi. 2019. "Light-induced rare earth organic complex/shape-memory polymer composites with high strength and luminescence based on hydrogen bonding." Composites Part A: Applied Science and Manufacturing. 125, pp. 1-9. https://doi.org/10.1016/j.compositesa.2019.105525
Effects of selectively triggered photothermal particles on shape memory polymer composites: an investigation on structural performance, thermomechanical characteristics and photothermal behaviour
Herath, Madhubhashitha, Epaarachchi, Jayantha, Islam, Mainul, Yan, Cheng, Zhang, Fenghua and Leng, Jinsong. 2019. "Effects of selectively triggered photothermal particles on shape memory polymer composites: an investigation on structural performance, thermomechanical characteristics and photothermal behaviour." Journal of Intelligent Material Systems and Structures. 30 (20), pp. 3124-3135. https://doi.org/10.1177/1045389X19879998
Modeling, analysis, and testing of viscoelastic properties of shape memory polymer composites and a brief review of their space engineering applications
Al Azzawi, Wessam, Herath, Madhubhashitha and Epaarachchi, Jayantha. 2019. "Modeling, analysis, and testing of viscoelastic properties of shape memory polymer composites and a brief review of their space engineering applications." Guedes, Rui Miranda (ed.) Creep and fatigue in polymer matrix composites. United Kingdom. Woodhead Publishing Limited. pp. 465-495
Fatigue crack analysis of ferrite material by acoustic emission technique
Khan, Md. T. I., Rashid, A. A., Hidaka, R., Hattori, N. and Islam, Md. M.. 2019. "Fatigue crack analysis of ferrite material by acoustic emission technique." Journal of Mechanical Engineering and Sciences. 13 (2), pp. 5074-5089. https://doi.org/10.15282/jmes.13.2.2019.21.0418
Thermo-mechanical properties of fused borosilicate syntactic foams
Salleh, Z., Islam, M. M., Epaarachchi, J. A. and Khan, M. T. I.. 2019. "Thermo-mechanical properties of fused borosilicate syntactic foams." Journal of Mechanical Engineering and Sciences. 13 (2), pp. 4898-4910. https://doi.org/10.15282/jmes.13.2.2019.10.0407
An investigation on the student performance in first year fundamental engineering course, Engineering Statics
Islam, Md Mainul and Epaarachchi, Jayantha Ananda. 2018. "An investigation on the student performance in first year fundamental engineering course, Engineering Statics." Educational Research Applications. 2018 (01), pp. 1-5. https://doi.org/10.29011/2575-7032/100044
Flax fiber and its composites: an overview of water and moisture absorption impact on their performance
Moudood, Abul, Rahman, Anisur, Ochsner, Andreas, Islam, Mainul and Francucci, Gaston. 2019. "Flax fiber and its composites: an overview of water and moisture absorption impact on their performance." Journal of Reinforced Plastics and Composites. 38 (7), pp. 323-339. https://doi.org/10.1177/0731684418818893
Sediment color tool for targeting arsenic-safe aquifers for the installation of shallow drinking water tubewells
Hossain, Mohammed, Bhattacharya, Prosun, Frape, Shaun K., Jacks, Gunnar, Islam, M. Mainul, Rahman, M. Moklesur, von Bromssen, Mattias, Hasan, M. Aziz and Ahmed, Kazi Matin. 2014. "Sediment color tool for targeting arsenic-safe aquifers for the installation of shallow drinking water tubewells." Science of the Total Environment. 493, pp. 615-625. https://doi.org/10.1016/j.scitotenv.2014.05.064
Thermal expansion properties of fused borosilicate syntactic foams
Salleh, Zulzamri, Islam, Md Mainul and Epaarachchi, Jayantha Ananda. 2018. "Thermal expansion properties of fused borosilicate syntactic foams." Nano Hybrids and Composites. 23, pp. 39-45. https://doi.org/10.4028/www.scientific.net/NHC.23.39
Flammability characteristics of chemical treated woven hemp fabric reinforced vinyl ester composites
Misnon, M. I., Islam, M. M., Epaarachchi, J. A., Chen, H., Goda, K. and Khan, M. T. I.. 2018. "Flammability characteristics of chemical treated woven hemp fabric reinforced vinyl ester composites." Science and Technology of Materials. 30 (3), pp. 174-188. https://doi.org/10.1016/j.stmat.2018.06.001
Investigation of ultraviolet radiation effects on thermomechanical properties and shape memory behaviour of styrene-based shape memory polymers and its composite
Al Azzawi, Wessam, Epaarachchi, J. A. and Leng, Jinsong. 2018. "Investigation of ultraviolet radiation effects on thermomechanical properties and shape memory behaviour of styrene-based shape memory polymers and its composite." Composites Science and Technology. 165, pp. 266-273. https://doi.org/10.1016/j.compscitech.2018.07.001
Investigation of FBG sensor performance in detection of delamination damage in a half-conical shape composite component
Kakei, Ayad, Manuela, Jerry, Srinivasan, Vishwas, Sharda, Arvind, Islam, Mainul and Epaarachchi, Jayantha. 2019. "Investigation of FBG sensor performance in detection of delamination damage in a half-conical shape composite component ." 12th International Workshop on Structural Health Monitoring (IWSHM). United States 10 - 12 Sep 2019 United States. https://doi.org/10.12783/shm2019/32451
Simulation of Tensile Stress Concentration Evaluation using Finite Element Performance
Salleh, Zulzamri, Islam, Md Mainul and Epaarachchi, Jayantha. 2019. "Simulation of Tensile Stress Concentration Evaluation using Finite Element Performance." International Journal of Innovative Technology and Exploring Engineering. 8 (12), pp. 5647-5652. https://doi.org/10.35940/ijitee.L3989.1081219
Structural performance and photothermal recovery of carbon fibre reinforced shape memory polymer
Herath, H. M .C. M., Epaarachchi, J. A., Islam, M. M., Al-Azzawi, W., Leng, J. and Zhang, F.. 2018. "Structural performance and photothermal recovery of carbon fibre reinforced shape memory polymer." Composites Science and Technology. 167, pp. 206-214. https://doi.org/10.1016/j.compscitech.2018.07.042
Thermo-mechanical behaviour and shape memory characteristics of carbon fibre reinforced epoxy
Herath, Madhubhashitha, Al-Azzawi, Wessam, Epaarachchi, Jayantha, Islam, Mainul, Robertson, Scott, Leng, Jinsong and Zhang, F.. 2018. "Thermo-mechanical behaviour and shape memory characteristics of carbon fibre reinforced epoxy." 2018 International Conference on Nanoscience and Nanotechnology (ICONN 2018). Wollongong, Australia 29 Jan - 02 Feb 2018
Fracture behaviour of bamboo fiber reinforced epoxy composites
Khan, Ziaullah, Yousif, B. F. and Islam, Mainul. 2017. "Fracture behaviour of bamboo fiber reinforced epoxy composites." Composites Part B: Engineering. 116, pp. 186-199. https://doi.org/10.1016/j.compositesb.2017.02.015
Effects of water absorption on mechanical properties of glass microballoons/vinyl ester syntactic foams
Salleh, Zulzamri, Islam, Md Mainul, Epaarachchi, Jayantha Ananda and Khan, Md Tawhidul Islam. 2018. "Effects of water absorption on mechanical properties of glass microballoons/vinyl ester syntactic foams." Research and Reviews in Materials Science and Chemistry. 8 (1), pp. 59-119.
Evaluation of delamination crack tip in woven fibre glass reinforced polymer composite using FBG sensor spectra and thermo-elastic response
Kakei, Ayad, Epaarachchi, J. A., Islam, Mainul and Leng, J.. 2018. "Evaluation of delamination crack tip in woven fibre glass reinforced polymer composite using FBG sensor spectra and thermo-elastic response." Measurement. 122, pp. 178-185. https://doi.org/10.1016/j.measurement.2018.03.023
Use of fiber Bragg grating sensors for monitoring delamination damage propagation in glass-fiber reinforced composite structures
Kakei, Ayad and Epaarachchi, Jayantha A.. 2018. "Use of fiber Bragg grating sensors for monitoring delamination damage propagation in glass-fiber reinforced composite structures." Frontiers of Optoelectronics. 11 (1), pp. 60-68. https://doi.org/10.1007/s12200-018-0761-9
Implementation of a finite element analysis procedure for structural analysis of shape memory behaviour of fibre reinforced shape memory polymer composites
Al Azzawi, Wessam, Epaarachchi, J. A., Islam, Mainul and Leng, Jinsong. 2017. "Implementation of a finite element analysis procedure for structural analysis of shape memory behaviour of fibre reinforced shape memory polymer composites." Smart Materials and Structures. 26 (12), pp. 1-13. https://doi.org/10.1088/1361-665X/aa928e
Quantitative and qualitative analyses of mechanical behavior and dimensional stability of styrene-based shape memory composites
Al Azzawi, Wessam, Islam, Mainul M., Leng, Jinsong, Li, Fengfeng and Epaarachchi, Jayantha A.. 2017. "Quantitative and qualitative analyses of mechanical behavior and dimensional stability of styrene-based shape memory composites." Journal of Intelligent Material Systems and Structures. 28 (20), pp. 3115-3126. https://doi.org/10.1177/1045389X17705210
Preliminary study on the development of syntactic foams for marine applications
Salleh, Z., Islam, M. M. and Ku, H.. 2013. "Preliminary study on the development of syntactic foams for marine applications." Epaarachchi, Jayantha A., Lau, Alan Kin-tak and Leng, Jinsong (ed.) 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013). Gold Coast, Australia 10 - 12 Jul 2013 United States. https://doi.org/10.1117/12.2028279
Water exposure, tensile and fatigue properties of treated hemp reinforced vinyl ester composites
Misnon, Mohd Iqbal, Islam, Mainul, Epaarachchi, Jayantha, Affandi, Nor Dalila Nor and Wang, Hao. 2018. "Water exposure, tensile and fatigue properties of treated hemp reinforced vinyl ester composites ." National Symposium on Polymeric Materials 2017 (NSPM 2017). Selangor, Malaysia 21 - 22 Oct 2017 United States . AIP Publishing. https://doi.org/10.1063/1.5047164
Use of an elasto-plastic model and strain measurements of embedded fibre Bragg grating sensors to detect Mode I delamination crack propagation in woven cloth (0/90) composite materials
Kakei, Ayad Arab, Islam, Mainul, Leng, Jingsong and Epaarachchi, Jayantha A.. 2018. "Use of an elasto-plastic model and strain measurements of embedded fibre Bragg grating sensors to detect Mode I delamination crack propagation in woven cloth (0/90) composite materials." Structural Health Monitoring: an international journal. 17 (2), pp. 363-378. https://doi.org/10.1177/1475921717694812
Determination of coefficient thermal expansion of glass microballoon/vinyl ester syntactic foams
Salleh, Zulzamri, Islam, Md Mainul and Epaarachchi, Jayantha Ananda. 2016. "Determination of coefficient thermal expansion of glass microballoon/vinyl ester syntactic foams." 3rd Advanced Materials Conference (AMC 2016): Advanced Materials for Sustainability and Growth. Langkawi, Malaysia 28 - 29 Nov 2016 Malaysia. AIP Publishing. https://doi.org/10.1063/1.5010477
Thermogravimetry analysis on fused borosilicate syntactic foams
Salleh, Zulzamri, Islam, Md Mainul and Epaarachchi, Jayantha Ananda. 2017. "Thermogravimetry analysis on fused borosilicate syntactic foams." 3rd Advanced Materials Conference (AMC 2016): Advanced Materials for Sustainability and Growth. Langkawi, Malaysia 28 - 29 Nov 2016 Kulim, Kedah, Malaysia. AIP Publishing. https://doi.org/10.1063/1.5010542
Analysis of stress concentration factor for tensile characteristics of syntactic foam using finite element method
Salleh, Zulzamri, Islam, Md Mainul and Epaarachchi, Jayantha Ananda. 2017. "Analysis of stress concentration factor for tensile characteristics of syntactic foam using finite element method." Journal of Research Updates in Polymer Science. 6 (1), pp. 21-32. https://doi.org/10.6000/1929-5995.2017.06.01.4
Vinyl ester/glass microballoon syntactic foams with low density
Salleh, Zulzamri, Islam, Md Mainul, Epaarachchi, Jayantha Ananda and Su, Haibin. 2017. "Vinyl ester/glass microballoon syntactic foams with low density." International Research Journal of Materials Sciences and Applications. 2017 (1), pp. 1-25.
Investigation of the impact properties of glass fibre / HMPP fibre hybrid composite materials for civil infrastructure constructions
Malvern, J. L., Epaarachchi, J. A. and Lau, K. T.. 2011. "Investigation of the impact properties of glass fibre / HMPP fibre hybrid composite materials for civil infrastructure constructions." 18th International Conference on Composite Materials (ICCM-18). Jeju, Korea 21 - 26 Aug 2011 Korea.
Development of hemp fabric reinforced composites
Misnon, Mohd Iqbal. 2016. Development of hemp fabric reinforced composites. PhD Thesis Doctor of Philosophy. University of Southern Queensland.
Identification of distortions to FBG spectrum using FBG fixed filters
Kahandawa, G. C., Epaarachchi, J. A. and Wang, H.. 2011. "Identification of distortions to FBG spectrum using FBG fixed filters." Lee, Woo (ed.) 18th International Conference on Composite Materials (ICCM-18). Jeju, Korea 21 - 26 Aug 2011 Korea.
Mechanical properties of activated carbon (AC) coconut shell reinforced polypropylene composites encapsulated with epoxy resin
Salleh, Z., Islam, M. M., Yusop, M. Y. M. and Idrus, M. A. Munaim M.. 2014. "Mechanical properties of activated carbon (AC) coconut shell reinforced polypropylene composites encapsulated with epoxy resin." Xuan, Li (ed.) 5th International Conference on Chemical, Biological and Environmental Engineering (ICBEE 2013). New Delhi, India 14 - 15 Sep 2013 United States. https://doi.org/10.1016/j.apcbee.2014.01.017
Tensile behaviours of activated carbon (AC) coconut shell reinforced recycle polyethylene (PET) hybrid composites
Salleh, Zulzamri, Islam, Md Mainul, Yusop, M. Y. M. and Muhamad, M. S.. 2013. "Tensile behaviours of activated carbon (AC) coconut shell reinforced recycle polyethylene (PET) hybrid composites." 12th International Conference on Frontiers of Polymers and Advanced Materials (ICFPAM 2013). Auckland, New Zealand 08 - 13 Dec 2013
Cure shrinkage in epoxy grouts for grouted repairs
Shamsuddoha, Md, Islam, Md Mainul, Aravinthan, Thiru, Manalo, Allan and Lau, Kin-tak. 2013. "Cure shrinkage in epoxy grouts for grouted repairs." Epaarachchi, Jayantha A., Lau, Alan Kin-tak and Leng, Jinsong (ed.) 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013). Gold Coast, Australia 10 - 12 Jul 2013 United States. https://doi.org/10.1117/12.2028085
Selection of hemp fabric as reinforcement in composite materials
Misnon, Mohd Iqbal, Islam, Md Mainul, Epaarachchi, Jayantha Ananda and Lau, Kin-tak. 2014. "Selection of hemp fabric as reinforcement in composite materials." Mashud, Mohammad (ed.) 3rd International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE 2014). Khulna, Bangladesh 26 - 27 Dec 2014 Khulna, Bangladesh.
Compressive properties of ceramic microballoon syntactic foams
Salleh, Zulzamri, Islam, Md Mainul and Epaarachchi, Jayantha Ananda. 2014. "Compressive properties of ceramic microballoon syntactic foams." Mashud, Mohammad (ed.) 3rd International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE 2014). Khulna, Bangladesh 26 - 27 Dec 2014 Khulna, Bangladesh.
Compressive, tensile and thermal properties of epoxy grouts subjected to underwater conditioning at elevated temperature
Shamsuddoha, M., Islam, M. M., Aravinthan, T., Manalo, A. and Djukic, L. P.. 2014. "Compressive, tensile and thermal properties of epoxy grouts subjected to underwater conditioning at elevated temperature." Smith, Scott T. (ed.) 23rd Australasian Conference on the Mechanics of Structures and Materials (ACMSM23). Byron Bay, Australia 09 - 12 Dec 2014 Lismore, Australia.
Development of fracture and damage modeling concepts for composite materials
Kakei, Ayad Arab Ghaidan, Epaarachchi, Jayantha Ananda, Islam, M. Mainul and Leng, Jinsong. 2016. "Development of fracture and damage modeling concepts for composite materials." Epaarachchi, Jayantha Ananda and Kahandawa, Gayan Chanaka (ed.) Structural health monitoring technologies and next-generation smart composite structures. Roca Raton, USA. CRC Press. pp. 341-368
Effect of a nano-fibrous structure on the nanofiber mat's hydrophobicity
Javazmi, L., Khodami, A., Mazrouei-Sebdani, Z. and Epaarachchi, J.. 2016. "Effect of a nano-fibrous structure on the nanofiber mat's hydrophobicity." 2016 International Conference on Nanoscience and Nanotechnology (ICONN 2016) . Canberra, Australia 07 - 11 Feb 2016
Integration of textile fabric and coconut shell in particleboard
Misnon, M. I., Bahari, S. A., Islam, M. M. and Epaarachchi, J. A.. 2013. "Integration of textile fabric and coconut shell in particleboard ." Epaarachchi, Jayantha A., Lau, Alan Kin-tak and Leng, Jinsong (ed.) 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013). Gold Coast, Australia 10 - 12 Jul 2013 United States. https://doi.org/10.1117/12.2027836
Effect of hygrothermal conditioning on the mechanical and thermal properties of epoxy grouts for offshore pipeline rehabilitation
Shamsuddoha, Md, Islam, Md Mainul, Aravinthan, Thiru, Manalo, Allan and Djukic, Luke P.. 2016. "Effect of hygrothermal conditioning on the mechanical and thermal properties of epoxy grouts for offshore pipeline rehabilitation." AIMS Material Science. 3 (3), pp. 832-850. https://doi.org/10.3934/matersci.2016.3.832
Mechanical properties of sandwich composite made of syntactic foam core and GFRP skins
Salleh, Zulzamri, Islam, Md Mainul, Epaarachchi, Jayantha Ananda and Su, Haibin. 2016. "Mechanical properties of sandwich composite made of syntactic foam core and GFRP skins." AIMS Material Science. 3 (4), pp. 1704-1727. https://doi.org/10.3934/matersci.2016.4.1704
Analysis of stress concentration factor around the hole of syntactic foam tensile specimens
Salleh, Z., Islam, M. M. and Epaarachchi, J. A.. 2016. "Analysis of stress concentration factor around the hole of syntactic foam tensile specimens." International Journal of Advances in Science, Engineering and Technology (IJASEAT). 4 (3), pp. 102-106.
Woven hemp fabric reinforced vinyl ester composite: effect of water absorption on the mechanical properties degradation
Misnon, Mohd Iqbal, Islam, Md Mainul, Epaarachchi, Jayantha Ananda, Wang, Hao and Lau, Kin-tak. 2016. "Woven hemp fabric reinforced vinyl ester composite: effect of water absorption on the mechanical properties degradation." International Journal of Advances in Science, Engineering and Technology (IJASEAT). 4 (3), pp. 96-101.
Woven hemp fabric reinforced vinyl ester composite treated with fire retardant
Misnon, Mohd Iqbal, Islam, Md Mainul, Epaarachchi, Jayantha Ananda, Chen, Haizhen and Wang, Hao. 2016. "Woven hemp fabric reinforced vinyl ester composite treated with fire retardant." International Journal of Advances in Science, Engineering and Technology (IJASEAT). 4 (3), pp. 90-95.
Shape memory polymers and their applications
Al Azzawi, W. S., Epaarachchi, Jayantha Ananda, Islam, M. Mainul and Leng, Jinsong. 2016. "Shape memory polymers and their applications." Epaarachchi, Jayantha Ananda and Kahandawa, Gayan Chanaka (ed.) Structural health monitoring technologies and next-generation smart composite structures. Boca Raton, Florida. CRC Press. pp. 447-478
Important aspects of finite element modeling of low density thermo plastic closed cell foams
Thota, N. M., Epaarachchi, J. A. and Lau, K. T.. 2013. "Important aspects of finite element modeling of low density thermo plastic closed cell foams." Mishra, G. C. and Sanskriti, Krishi (ed.) 3rd World Congress on Frontiers of Mechanical, Aerospace and Automotive Engineering (WCFMAAE 2013). New Delhi, India 02 - 03 Feb 2013 New Delhi, India.
Detection and characterisation of delamination damage propagation in woven glass fibre reinforced polymer composite using thermoelastic response mapping
Kakei, Ayad, Epaarachchi, J. A., Islam, Mainul, Leng, J. and Rajic, N.. 2016. "Detection and characterisation of delamination damage propagation in woven glass fibre reinforced polymer composite using thermoelastic response mapping." Composite Structures. 153, pp. 442-450. https://doi.org/10.1016/j.compstruct.2016.06.044
Mechanical properties of low density glass microballoon/vinyl ester syntactic foam for marine application
Salleh, Zulzamri, Islam, Md Mainul and Epaarachchi, Jayantha Ananda. 2015. "Mechanical properties of low density glass microballoon/vinyl ester syntactic foam for marine application." 12th Composites Australia and CRC-ACS Conference 2015: Game On! Winning with Composites. Gold Coast, Australia 21 - 23 Apr 2015
Compressive behaviour of low density polymeric syntactic foams
Salleh, Zulzamri, Islam, Md Mainul and Epaarachchi, Jayantha Ananda. 2015. "Compressive behaviour of low density polymeric syntactic foams." Applied Mechanics and Materials. 799-800, pp. 135-139. https://doi.org/10.4028/www.scientific.net/AMM.799-800.135
Analyses of woven hemp fabric characteristics for composite reinforcement
Misnon, M. I., Islam, M. M., Epaarachchi, J. A. and Lau, K. T.. 2015. "Analyses of woven hemp fabric characteristics for composite reinforcement." Materials and Design. 66 (A), pp. 82-92. https://doi.org/10.1016/j.matdes.2014.10.037
Characterisation of the mechanical properties of pultruded fibre-reinforced polymer tube
Guades, Ernesto, Aravinthan, Thiru and Islam, Md Mainul. 2014. "Characterisation of the mechanical properties of pultruded fibre-reinforced polymer tube." Materials and Design. 63, pp. 305-315. https://doi.org/10.1016/j.matdes.2014.06.018
Evaluation of the blunt thoracic trauma caused by solid sports ball impacts
Thota, Narasimha, Epaarachchi, Jayantha and Lau, Kin Tak. 2015. "Evaluation of the blunt thoracic trauma caused by solid sports ball impacts." Journal of Biomechanical Science and Engineering. 10 (2). https://doi.org/10.1299/jbse.14-00264
Viscous criterion and its relation with the projectile-thorax energy interactions
Thota, Narasimha, Epaarachchi, Jayantha and Lau, Kin Tak. 2014. "Viscous criterion and its relation with the projectile-thorax energy interactions." 8th Australasian Congress on Applied Mechanics (ACAM 8). Melbourne, Australia 24 - 28 Nov 2014
Evaluation of the blunt thoracic trauma due to baseball impacts – review of the Blunt Criterion
Thota, Narasimha M., Epaarachchi, Jayantha A. and Lau, Kin Tak. 2014. "Evaluation of the blunt thoracic trauma due to baseball impacts – review of the Blunt Criterion." 8th Australasian Congress on Applied Mechanics (ACAM 8). Melbourne, Australia 24 - 28 Nov 2014
Effect of energy absorbing mechanisms on the blunt thoracic trauma caused by ballistic impacts
Thota, Narasimha M., Epaarachchi, Jayantha A. and Lau, Kin Tak. 2014. "Effect of energy absorbing mechanisms on the blunt thoracic trauma caused by ballistic impacts." 8th Australasian Congress on Applied Mechanics (ACAM 8). Melbourne, Australia 24 - 28 Nov 2014
Review of anthropomorphic test dummies for the evaluation of thoracic trauma due to blunt ballistic impacts
Thota, Narasimha M., Epaarachchi, Jayantha A. and Lau, Kin Tak. 2014. "Review of anthropomorphic test dummies for the evaluation of thoracic trauma due to blunt ballistic impacts." 8th Australasian Congress on Applied Mechanics (ACAM 8). Melbourne, Australia 24 - 28 Nov 2014
Impact location determination on thin laminated composite plates using an NIR-FBG sensor system
Hafizi, Z. M., Epaarachchi, J. and Lau, K. T.. 2015. "Impact location determination on thin laminated composite plates using an NIR-FBG sensor system." Measurement. 61, pp. 51-57. https://doi.org/10.1016/j.measurement.2014.08.040
Signal monitoring system for monitoring strain applied to a composite component
Kahandawa Appuhamillage, Gayan Chanaka, Epaarachchi, Jayantha and Wang, Hao. 2015. Signal monitoring system for monitoring strain applied to a composite component. US Patent No. 9063032 B2/23rd June 2015
CAE simulation based methodology for airbag compliant vehicle front protection system development
Thota, Narasimha, Epaarachchi, Jayantha and Lau, Kin Tak. 2013. "CAE simulation based methodology for airbag compliant vehicle front protection system development." International Journal of Vehicle Structures and Systems. 5 (3-4), pp. 95-104. https://doi.org/10.4273/ijvss.5.3-4.04
Potentiality of utilising natural textile materials for engineering composites applications
Misnon, Mohd Iqbal, Islam, Md Mainul, Epaarachchi, Jayantha Ananda and Lau, Kin-tak. 2014. "Potentiality of utilising natural textile materials for engineering composites applications." Materials and Design. 59, pp. 359-368. https://doi.org/10.1016/j.matdes.2014.03.022
Development and validation of a thorax surrogate FE model for assessment of trauma due to high speed blunt impacts
Thota, Narasimha, Epaarachchi, Jayantha and Lau, Kin-Tak. 2014. "Development and validation of a thorax surrogate FE model for assessment of trauma due to high speed blunt impacts." Journal of Biomechanical Science and Engineering. 9 (1), pp. 08-1. https://doi.org/10.1299/jbse.2014jbse0008
An investigation of acoustic emission signal attenuation for monitoring of progressive failure in fiberglass reinforced composite laminates
Hafizi, Z. M., Epaarachchi, J. and Lau, K. T.. 2013. "An investigation of acoustic emission signal attenuation for monitoring of progressive failure in fiberglass reinforced composite laminates ." International Journal of Automotive and Mechanical Engineering. 8 (1), pp. 1442-1456. https://doi.org/10.15282/ijame.8.2013.31.0119
Mechanical and thermal properties of jute fibre reinforced composites
Kabir, Mohammad Mazedul, Islam, Md Mainul and Wang, Hao. 2013. "Mechanical and thermal properties of jute fibre reinforced composites." Journal of Multifunctional Composites. 1 (1), pp. 71-77. https://doi.org/10.12783/issn.2168-4286/1.1/Islam
Effectiveness of using fibre-reinforced polymer composites for underwater steel pipeline repairs
Shamsuddoha, Md, Islam, Md Mainul, Aravinthan, Thiru, Manalo, Allan and Lau, Kin-tak. 2013. "Effectiveness of using fibre-reinforced polymer composites for underwater steel pipeline repairs." Composite Structures. 100, pp. 40-54. https://doi.org/10.1016/j.compstruct.2012.12.019
Prediction of obsolete FBG sensor using ANN for efficient and robust operation of SHM systems
Kahandawa, Gayan C., Epaarachchi, Jayantha A., Wang, Hao and Lau, K. T.. 2013. "Prediction of obsolete FBG sensor using ANN for efficient and robust operation of SHM systems." 4th Asia-Pacific Workshop on Structural Health Monitoring (APWSHM 2012). Melbourne, Australia 05 - 07 Dec 2012 Zurich, Switzerland. https://doi.org/10.4028/www.scientific.net/KEM.558.546
Smart structure for small wind turbine blade
Supeni, E. E., Epaarachchi, J. A., Islam, M. M. and Lau, K. T.. 2013. "Smart structure for small wind turbine blade." Epaarachchi, Jayantha A., Lau, Alan Kin-tak and Leng, Jinsong (ed.) 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013). Gold Coast, Australia 10 - 12 Jul 2013 United States. https://doi.org/10.1117/12.2027725
Mechanical properties of epoxy grouts for structural repair
Shamsuddoha, M., Islam, M. M., Aravinthan, T., Manalo, A. C. and Lau, K. T.. 2013. "Mechanical properties of epoxy grouts for structural repair." Samali, Bijan, Attard, Mario M. and Song, Chongmin (ed.) 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM22). Sydney, Australia 11 - 14 Dec 2012 London, United Kingdom.
Effect of coarse filler on shrinkages and dynamic mechanical properties of epoxy grouts
Shamsuddoha, Md, Islam, Md Mainul, Aravinthan, Thiru, Manalo, Allan and Lau, Kin-Tak. 2014. "Effect of coarse filler on shrinkages and dynamic mechanical properties of epoxy grouts." Journal of Multifunctional Composites. 2 (1), pp. 61-66. https://doi.org/10.12783/issn.2168-4286/2.1/
Sustainable composites
Yousif, Belal F., Islam, Md Mainul and Salit, Mohd Sapuan. 2013. "Sustainable composites." Advances in Materials Science and Engineering. https://doi.org/10.1155/2013/142718
Embedded fibre optic sensors under multi-axial loading: a pilot study
Peauril, J., Epaarachchi, J., Lau, K. T. and Wang, H.. 2013. "Embedded fibre optic sensors under multi-axial loading: a pilot study." Epaarachchi, Jayantha A. , Lau, Alan Kin-tak and Leng, Jinsong (ed.) 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013). Gold Coast, Australia 10 - 12 Jul 2013 Bellingham, WA. United States. SPIE. https://doi.org/10.1117/12.2027958
NIR fibre bragg grating as dynamic sensor: an application of 1D digital wavelet analysis for signal denoising
Hafizi, Z. M., Kahandawa, G. C., Epaarachchi, J., Lau, K. T., Canning, J. and Cook, K.. 2013. "NIR fibre bragg grating as dynamic sensor: an application of 1D digital wavelet analysis for signal denoising ." Epaarachchi, Jayantha A. , Lau, Alan Kin-tak and Leng, Jinsong (ed.) 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013). Gold Coast, Australia 10 - 12 Jul 2013 Bellingham, WA. United States. https://doi.org/10.1117/12.2026668
Characterisation of mechanical and thermal properties of epoxy grouts for composite repair of steel pipelines
Shamsuddoha, Md, Islam, Md Mainul, Aravinthan, Thiru, Manalo, Allan and Lau, Kin-tak. 2013. "Characterisation of mechanical and thermal properties of epoxy grouts for composite repair of steel pipelines." Materials and Design. 52, pp. 315-327. https://doi.org/10.1016/j.matdes.2013.05.068
Study on compressive properties of syntactic foams for marine applications
Salleh, Z., Islam, M. M. and Ku, H.. 2014. "Study on compressive properties of syntactic foams for marine applications." Journal of Multifunctional Composites. 2 (1), pp. 21-27. https://doi.org/10.12783/issn.2168-4286/2.1/Salleh
Indexing damage using distortion of embedded FBG sensor response spectra
Kahandawa, Gayan C., Epaarachchi, Jayantha A. and Lau, K. T.. 2013. "Indexing damage using distortion of embedded FBG sensor response spectra ." Epaarachchi, Jayantha A. , Lau, Alan Kin-tak and Leng, Jinsong (ed.) 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013). Gold Coast, Australia 10 - 12 Jul 2013 Bellingham, WA. United States. https://doi.org/10.1117/12.2027945
Extraction and processing of real time strain of embedded FBG sensors using a fixed filter FBG circuit and an artificial neural network
Kahandawa, Gayan C., Epaarachchi, Jayantha, Wang, Hao, Canning, John and Lau, K. T.. 2013. "Extraction and processing of real time strain of embedded FBG sensors using a fixed filter FBG circuit and an artificial neural network." Measurement. 46 (10), pp. 4045-4051. https://doi.org/10.1016/j.measurement.2013.07.029
Development of artificial neural network model in predicting performance of the smart wind turbine blade
Supeni, E. E., Epaarachchi, J. A., Islam, M. M. and Lau, K. T.. 2013. "Development of artificial neural network model in predicting performance of the smart wind turbine blade." 3rd Malaysian Postgraduate Conference (MPC 2013). Sydney, Australia 04 - 05 Jul 2013 Sydney, Australia.
Textile material forms for reinforcement materials: a review
Misnon, M. I., Islam, M. M., Epaarachchi, J. and Lau, K. T.. 2013. "Textile material forms for reinforcement materials: a review." 3rd Malaysian Postgraduate Conference (MPC 2013). Sydney, Australia 04 - 05 Jul 2013 Sydney, Australia.
Wave propogation scattering due to defect on thin composite plates
Hafizi, Z. M., Epaarachchi, J. and Lau, K. T.. 2013. "Wave propogation scattering due to defect on thin composite plates." 3rd Malaysian Postgraduate Conference (MPC 2013). Sydney, Australia 04 - 05 Jul 2013 Sydney, Australia.
Tensile behaviours of activated carbon coconut shell filled epoxy composites
Salleh, Z., Islam, M. M. and Ku, H.. 2013. "Tensile behaviours of activated carbon coconut shell filled epoxy composites." Noor, M. M., Rahman, M. M. and Ismail, J. (ed.) 3rd Malaysian Postgraduate Conference (MPC 2013). Sydney, Australia 04 - 05 Jul 2013 Sydney, Australia.
Estimation of strain of distorted FBG sensor spectra using a fixed FBG filter circuit and an artificial neural network
Kahandawa, Gayan C., Epaarachchi, Jayantha, Lau, K. T. and Canning, John. 2013. "Estimation of strain of distorted FBG sensor spectra using a fixed FBG filter circuit and an artificial neural network ." Palaniswami, M., Leckie, C., Kanhere, S. and Gubbi, J. (ed.) IEEE 8th International Conference on Intelligent Sensors, Sensor Networks and Information Processing (ISSNIP 2013): Sensing the Future. Melbourne, Australia 02 - 05 Apr 2013 Piscataway, NJ. United States. https://doi.org/10.1109/ISSNIP.2013.6529770
Effect of the energy absorbing mechanisms on the blunt thoracic trauma caused by a typical foam projectile
Thota, Narasimha M., Epaarachchi, Jayantha A. and Lau, Kin-tak. 2013. "Effect of the energy absorbing mechanisms on the blunt thoracic trauma caused by a typical foam projectile." Mishra, G. C. and Sanskriti, Krishi (ed.) 3rd World Congress on Frontiers of Mechanical, Aerospace and Automotive Engineering (WCFMAAE 2013). New Delhi, India 02 - 03 Feb 2013 New Delhi, India.
Effect of the foam embellishments on the pedestrian safety of the vehicle front protection systems
Thota, N. M., Epaarachchi, J. A. and Lau, K. T.. 2013. "Effect of the foam embellishments on the pedestrian safety of the vehicle front protection systems." Mishra, G. C. and Sanskriti, Krishi (ed.) 3rd World Congress on Frontiers of Mechanical, Aerospace and Automotive Engineering (WCFMAAE 2013). New Delhi, India 02 - 03 Feb 2013 New Delhi, India.
Damage modelling of repeatedly impacted square fibre reinforced polymer composite tube
Guades, Ernesto, Aravinthan, Thiru, Manalo, Allan and Islam, Mainul. 2013. "Damage modelling of repeatedly impacted square fibre reinforced polymer composite tube." Materials and Design. 47, pp. 687-697. https://doi.org/10.1016/j.matdes.2012.12.051
Fibre composites for high pressure pipeline repairs, in-air and subsea: an overview
Shamsuddoha, Md, Islam, Md Mainul, Aravinthan, Thiru, Manalo, Allan, Lau, Kin-tak and Elder, David. 2012. "Fibre composites for high pressure pipeline repairs, in-air and subsea: an overview." Ueda, Tamon (ed.) 3rd Asia-Pacific Conference on FRP in Structures (APFIS 2012). Sapporo, Japan 02 - 04 Feb 2012 Hokkaido, Japan.
Behaviour of pultruded FRP hollow sections under eccentric loading
Islam, Md Mainul, Aravinthan, Thiru and Williams, Paul Garreth. 2012. "Behaviour of pultruded FRP hollow sections under eccentric loading." Monti, Georgio (ed.) 6th International Conference on FRP Composites in Civil Engineering (CICE 2012). Rome, Italy 13 - 15 Jun 2012 Rome, Italy.
Silk fibers and their unidirectional polymer composites
Ahmed, Mansur, Islam, Md Saiful, Ahsan, Qumrul and Islam, Md Mainul. 2012. "Silk fibers and their unidirectional polymer composites." Thomas, Sabu, Ninan, Neethu, Mohan, Mohan and Francis, Elizabeth (ed.) Natural polymers, biopolymers, biomaterials, and their composites, blends, and IPNs. Oakville, ON. Canada . Apple Academic Press (CRC Press). pp. 79-90
Non-velocity based analysis of passive ultrasonic signal for source location detection in composite plates: a pilot study
Hafizi, Z. M., Epaarachchi, J., Nizwan, C. K. E. and Lau, K. T.. 2012. "Non-velocity based analysis of passive ultrasonic signal for source location detection in composite plates: a pilot study." 1st International Conference of Mechanical Engineering Research (ICMER 2011). Kuantan, Malaysia 05 - 07 Dec 2011 Bristol, United Kingdom . https://doi.org/10.1088/1757-899X/36/1/012008
Modal acoustic emission investigation for progressive failure monitoring in thin composite plates under tensile test
Hafizi, Mohd Zohari, Epaarachchi, Jayantha Ananda and Lau, K. T.. 2013. "Modal acoustic emission investigation for progressive failure monitoring in thin composite plates under tensile test." Key Engineering Materials. 558 (558), pp. 65-75. https://doi.org/10.4028/www.scientific.net/KEM.558.65
Optimized FBG sensor network for efficient detection of a delamination in FRP structures
Kahandawa, G. C., Epaarachchi, J. A., Wang, H. and Lau, K. T.. 2012. "Optimized FBG sensor network for efficient detection of a delamination in FRP structures." Jaafar, M., Azura, A. R., Leong, K. H. and Leong, A. Y. L. (ed.) 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today. Kuala Lumpur, Malaysia 06 - 08 Nov 2012 Kowloon, Hong Kong.
Detecting delamination in a composite structure using an embedded FBG-AE hybrid system
Kahandawa, G. C., Hafizi, Z. M., Epaarachchi, J. and Lau, K. T.. 2012. "Detecting delamination in a composite structure using an embedded FBG-AE hybrid system." Kotousov, Andrei (ed.) 7th Australasian Congress on Applied Mechanics (ACAM 2012). Adelaide, Australia 09 - 12 Dec 2012 Canberra, Australia.
Modelling of tensile properties glass powder/epoxy composites post-cured in an oven and in microwaves
Ku, H., Epaarachchi, J., Trada, M. and Wong, P.. 2013. "Modelling of tensile properties glass powder/epoxy composites post-cured in an oven and in microwaves ." Journal of Reinforced Plastics and Composites. 32 (10), pp. 689-699. https://doi.org/10.1177/0731684412475333
An investigation of effective detection length of a localized micro-failure in a laminated thin composite plate using FBG sensor integrated AE system
Hafizi, Z. M., Epaarachchi, J. and Lau, K. T.. 2012. "An investigation of effective detection length of a localized micro-failure in a laminated thin composite plate using FBG sensor integrated AE system." Jaafar, M., Azura, A. R., Leong, K. H. and Leong, A. Y. L. (ed.) 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today. Kuala Lumpur, Malaysia 06 - 08 Nov 2012 Kowloon, Hong Kong.
A pilot study on flexural properties of epoxy nanoclay reinforced composites
Ku, H., Fung, S. Y., Islam, M., Li, X. and Chong, Y. P.. 2013. "A pilot study on flexural properties of epoxy nanoclay reinforced composites ." Journal of Reinforced Plastics and Composites. 32 (2), pp. 96-104. https://doi.org/10.1177/0731684412459246
Development of smart wind turbine blades
Supeni, E. E., Epaarachchi, J. A., Islam, M. M. and Lau, K. T.. 2012. "Development of smart wind turbine blades." Jaafar, M., Azura, A. R., Leong, K. H and Leong, A. Y. L (ed.) 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today. Kuala Lumpur, Malaysia 06 - 08 Nov 2012 Kowloon, Hong Kong.
Stiffness of FRP pultruded tubes under repeated axial impacts
Guades, Ernesto J., Aravinthan, Thiru, Islam, Md. Mainul and Manalo, Allan C.. 2012. "Stiffness of FRP pultruded tubes under repeated axial impacts." Ueda, Tamon (ed.) 3rd Asia-Pacific Conference on FRP in Structures (APFIS 2012). Sapporo, Japan 02 - 04 Feb 2012 Hokkaido, Japan.
Develop and validate a biomechanical surrogate of the human thorax using corrugated sheets: a feasibility study
Thota, Narasimha Murthy, Eepaarachchi, Jayantha A. and Lau, K. T.. 2012. "Develop and validate a biomechanical surrogate of the human thorax using corrugated sheets: a feasibility study." 7th Australasian Congress on Applied Mechanics (ACAM 2012). Adelaide, Australia 09 - 12 Dec 2012 Canberra, Australia.
Effects of energy level and impact repetitions on the impact fatigue behaviour and post-impact flexural properties of square FRP pultruded tubes
Guades, E. J., Aravinthan, T., Manalo, A. C. and Islam, M. M.. 2013. "Effects of energy level and impact repetitions on the impact fatigue behaviour and post-impact flexural properties of square FRP pultruded tubes." Samali, Bijan, Attard, Mario M. and Song, Chongmin (ed.) 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM22). Sydney, Australia 11 - 14 Dec 2012 London, United Kingdom.
Use of fixed wavelength Fibre-Bragg Grating (FBG) filters to capture time domain data from the distorted spectrum of an embedded FBG sensor to estimate strain with an artificial neural network
Kahandawa, G. C., Epaarachchi, J. A., Wang, H., Followell, D. and Birt, P.. 2013. "Use of fixed wavelength Fibre-Bragg Grating (FBG) filters to capture time domain data from the distorted spectrum of an embedded FBG sensor to estimate strain with an artificial neural network." Sensors and Actuators A: Physical. 194, pp. 1-7. https://doi.org/10.1016/j.sna.2012.12.028
Sandwich composites made of syntactic foam core and paper skin: manufacturing and mechanical behavior
Islam, Md Mainul and Kim, Ho Sung. 2012. "Sandwich composites made of syntactic foam core and paper skin: manufacturing and mechanical behavior." Journal of Sandwich Structures and Materials. 14 (1), pp. 111-127. https://doi.org/10.1177/1099636211413564
Design of smart structures for wind turbine blades
Supeni, E. E., Epaarachchi, J. A., Islam, M. M. and Lau, K. T.. 2012. "Design of smart structures for wind turbine blades." Noor, M. M., Rahman, M. M. and Ismail, J. (ed.) 2nd Malaysian Postgraduate Conference (MPC 2012). Gold Coast, Australia 07 - 09 Jul 2012 Sydney, Australia.
Experimental investigation on the behaviour of square FRP composite tubes under repeated axial impact
Guades, Ernesto, Aravinthan, Thiru, Manalo, Allan and Islam, Mainul. 2013. "Experimental investigation on the behaviour of square FRP composite tubes under repeated axial impact." Composite Structures. 97, pp. 211-221. https://doi.org/10.1016/j.compstruct.2012.10.033
Signal monitoring system and methods of operating same
Kahandawa, Gayan Chanaka, Epaarachchi, Jayantha and Wang, Hao. 2013. Signal monitoring system and methods of operating same. WO/2013/151607
A review on the driving performance of FRP composite piles
Guades, Ernesto, Aravinthan, Thiru, Islam, Mainul and Manalo, Allan. 2012. "A review on the driving performance of FRP composite piles." Composite Structures. 94 (6), pp. 1932-1942. https://doi.org/10.1016/j.compstruct.2012.02.004
Modal analysis of high frequency acoustic signal approach for progressive failure monitoring in thin composite plates
Hafizi, Z. M., Epaarachchi, J. and Lau, K. T.. 2012. "Modal analysis of high frequency acoustic signal approach for progressive failure monitoring in thin composite plates." 2nd Malaysian Postgraduate Conference (MPC 2012). Gold Coast, Australia 07 - 09 Jul 2012 Sydney, Australia.
Compressive strength characterization of polyester based fillers
Sirimanna, Chamila Sampath, Lokuge, Weena, Islam, Md Mainul and Aravinthan, Thiru. 2012. "Compressive strength characterization of polyester based fillers." Advanced Materials Research. https://doi.org/10.4028/www.scientific.net/AMR.410.32
Use of FBG sensors for SHM in aerospace structures
Kahandawa, Gayan C., Epaarachchi, Jayantha, Wang, Hao and Lau, K. T.. 2012. "Use of FBG sensors for SHM in aerospace structures." Photonic Sensors. 2 (3), pp. 203-214. https://doi.org/10.1007/s13320-012-0065-4
Driveability of composite piles
Guades, E. J., Aravinthan, T. and Islam, M. M.. 2011. "Driveability of composite piles." Cowled, Craig J. L. (ed.) 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing (eddBE 2011). Brisbane, Australia 27 - 29 Apr 2011 Brisbane, Australia.
Behaviour of fibre composite pile under axial compression load
Guades, E. J., Sirimanna, C. S., Aravinthan, T. and Islam, M. M.. 2011. "Behaviour of fibre composite pile under axial compression load." Venkatesan, Srikanth, Lam, Nelson T. K. and Setunge, Sujeeva (ed.) 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM 21). Melbourne, Australia 07 - 10 Dec 2010 Leiden, Netherlands. https://doi.org/10.1201/b10571-81
Preliminary development of polymer based filler materials for GFRP tubular connector
Sirimanna, C. S., Islam, M. M. and Aravinthan, T.. 2011. "Preliminary development of polymer based filler materials for GFRP tubular connector." Fragomeni, Sam, Venkatesan, Srikanth, Lam, Nelson T. K. and Setunge, Sujeeva (ed.) 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM 21). Melbourne, Australia 07 - 10 Dec 2010 Leiden, Netherlands. https://doi.org/10.1201/b10571-79
Behaviour of fibre composite sandwich panels under uniformly distributed loading
Islam, M. M. and Aravinthan, T.. 2011. "Behaviour of fibre composite sandwich panels under uniformly distributed loading." Fragomeni, Sam, Venkatesan, Srikanth, Lam, Nelson T. K. and Setunge, Sujeeva (ed.) 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM 21). Melbourne, Australia 07 - 10 Dec 2010 Leiden, Netherlands. https://doi.org/10.1201/b10571-77
Influence of fly ash proportions on properties of polymer concrete with polyester resin
Lokuge, Weena, Aravinthan, Thiru, Sirimanna, Chamila Sampath and Islam, Mainul. 2011. "Influence of fly ash proportions on properties of polymer concrete with polyester resin." 25th Biennial Conference of the Concrete Institute of Australia (Concrete 2011): Building a Sustainable Future. Perth, Australia 12 - 14 Oct 2011 Sydney, Australia.
An investigation on the student performance in first year fundamental engineering course engineering statistics
Islam, Md Mainul and Epaarachchi, Jayantha Ananda. 2012. "An investigation on the student performance in first year fundamental engineering course engineering statistics." Mortimer, Rachel (ed.) 15th International First Year in Higher Education Conference (FYHE 2012) . Brisbane, Australia 26 - 29 Jun 2012 Brisbane, Australia.
An experimental investigation of early damage localization for thin glass fibre reinforced symmetric composite laminates
Hafizi, Z. M., Epaarachchi, J. and Lau, K. T.. 2012. "An experimental investigation of early damage localization for thin glass fibre reinforced symmetric composite laminates." Heslehurst, Rikard Benton and Byrne, Ann (ed.) Composites Australia and the CRC for Advanced Composite Structures Conference 2012: Diversity in Composites. Leura, Australia 15 - 16 Mar 2012 Melbourne, Australia.
Accelerated full scale fatigue testing of a small composite wind turbine blade using a mechanically operated test rig
Epaarachchi, Jayantha A. and Clausen, Philip D.. 2004. "Accelerated full scale fatigue testing of a small composite wind turbine blade using a mechanically operated test rig." Atrens, Andrej, Boland, J. N., Clegg, Richard and Griffiths, John (ed.) 2004 Structural Integrity and Fracture International Conference (SIF2004). Brisbane, Australia 26 - 29 Sep 2004 Australia.
Investigation of embedded near infrared fibre Bragg grating (FBG) sensors (830 nm) in structural health monitoring of glass fibre composite structures
Epaarachchi, Jayantha A., Canning, John and Stevenson, Michael. 2008. "Investigation of embedded near infrared fibre Bragg grating (FBG) sensors (830 nm) in structural health monitoring of glass fibre composite structures ." Sampson, David D. (ed.) 19th International Conference on Optical Fibre Sensors (OFS-19). Perth, Australia 15 - 18 Apr 2008 Bellingham, WA. United States. SPIE. https://doi.org/10.1117/12.786896
Dynamic behavior of hybrid composite bridge girder
Epaarachchi, J. A., Karunasena, W. and Aravinthan, T.. 2008. "Dynamic behavior of hybrid composite bridge girder." Aravinthan, Thiru, Karunasena, Warna (Karu) and Wang, Hao (ed.) 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM20). Toowoomba, Australia 02 - 05 Dec 2008 London, United Kingdom.
Manufacture of syntactic foams using starch as binder: post-mold processing
Islam, Md Mainul and Kim, Ho Sung. 2008. "Manufacture of syntactic foams using starch as binder: post-mold processing." Materials and Manufacturing Processes. 23 (8), pp. 884-892. https://doi.org/10.1080/10426910802413661
Syntactic foams consolidated with starch: mixing behaviour for post-mould processing
Islam, Md Mainul and Kim, Ho Sung. 2006. "Syntactic foams consolidated with starch: mixing behaviour for post-mould processing." 4th International Conference on Advanced Materials & Processing (ICAMP-4). Hamilton, New Zealand 10 - 13 Dec 2006 Hamilton, New Zealand.
Syntactic foams consolidated with starch: modelling for pre-mould processing
Islam, Md Mainul and Kim, Ho Sung. 2006. "Syntactic foams consolidated with starch: modelling for pre-mould processing." 4th International Conference on Advanced Materials & Processing (ICAMP-4). Hamilton, New Zealand 10 - 13 Dec 2006 Hamilton, New Zealand.
Novel syntactic foams made of ceramic hollow micro-spheres and starch - theory, structure and properties
Islam, Md Mainul and Kim, Ho Sung. 2006. "Novel syntactic foams made of ceramic hollow micro-spheres and starch - theory, structure and properties." Bandyopadhyay, Sri, Zeng, Q., Berndt, Christopher C., Rizkalla, S., Gowripalan, N. and Matison, Janison (ed.) ACUN-5 International Composites Conference. Sydney, Australia 11 - 14 Jul 2006 Sydney, Australia.
Syntactic foams consolidated with starch: mixing behaviour for post-mould processing
Islam, Md Mainul and Kim, Ho Sung. 2007. "Syntactic foams consolidated with starch: mixing behaviour for post-mould processing." Advanced Materials Research. 29-30, pp. 169-172.
Syntactic foams consolidated with starch: modelling for pre-mould processing
Islam, Md Mainul and Kim, Ho Sung. 2007. "Syntactic foams consolidated with starch: modelling for pre-mould processing." Advanced Materials Research. 29-30, pp. 165-168.
Novel syntactic foams made of ceramic hollow micro-spheres and starch: theory, structure and properties
Islam, Md Mainul and Kim, Ho Sung. 2007. "Novel syntactic foams made of ceramic hollow micro-spheres and starch: theory, structure and properties." Journal of Materials Science. 42 (15), pp. 6123-6132. https://doi.org/10.1007/s10853-006-1091-7
Manufacture of syntactic foams: pre-mold processing
Islam, Md Mainul and Kim, Ho Sung. 2007. "Manufacture of syntactic foams: pre-mold processing." Materials and Manufacturing Processes. 22 (1), pp. 28-36. https://doi.org/10.1080/10426910601015857
Pre-mould processing for syntactic foams: modelling, theory and experiment
Islam, Md Mainul and Kim, Ho Sung. 2008. "Pre-mould processing for syntactic foams: modelling, theory and experiment." 13th International Conference on Applied Mechanics and Mechanical Engineering (AMME-13). Cairo, Egypt 27 - 29 May 2008 Cairo, Egypt.
The developments of structural health/integrity monitoring systems using FBG sensors at CEEFC of USQ
Kahandawa, Gayan C., Epaarachchi, Jayantha A., Wang, Hao and Aravinthan, Thiru. 2010. "The developments of structural health/integrity monitoring systems using FBG sensors at CEEFC of USQ." Goh, Steven C. and Wang, Hao (ed.) 2010 Southern Region Engineering Conference (SREC 2010). Toowoomba, Australia 11 - 12 Nov 2010 Toowoomba, Australia.
The effect of viscoelasticity on fatigue behaviour of polymer matrix composites
Epaarachchi, J. A.. 2011. "The effect of viscoelasticity on fatigue behaviour of polymer matrix composites ." Guedes, Rui Miranda (ed.) Creep and fatigue in polymer matrix composites. Cambridge, United Kingdom. Woodhead Publishing Limited. pp. 492-513
Assessment of damage accumulation in glass fibre reinforced plastic (GFRP) composites under spectrum fatigue loading
Epaarachchi, Jayantha A.. 2006. "Assessment of damage accumulation in glass fibre reinforced plastic (GFRP) composites under spectrum fatigue loading." Hoffman, Mark and Price, John (ed.) 2006 International Conference on Structural Integrity and Failure (SIF2006). Sydney, Australia 27 - 29 Sep 2006 Australia.
Temperature effects on full scale FRP bridge using innovative composite components
Sirimanna, C. S., Islam, M. M. and Aravinthan, T.. 2011. "Temperature effects on full scale FRP bridge using innovative composite components." Ye, Lieping, Feng, Peng and Yue, Qingrui (ed.) 5th International Conference on FRP Composites in Civil Engineering (CICE 2010). Beijing, China 27 - 29 Sep 2010 Beijing, China.
Change of dynamic response of pultruded composite components used in advanced composite structures due to fatigue and fracture
Epaarachchi, J. A.. 2008. "Change of dynamic response of pultruded composite components used in advanced composite structures due to fatigue and fracture ." Aravinthan, Thiru, Karunasena, Warna and Wang, Hao (ed.) 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM20). Toowoomba, Australia 02 - 05 Dec 2008 London, United Kingdom.
Sensors, actuators, and intelligent processing [Preface]
Lau, Kin-Tak, Epaarachchi, Jayantha and Sudarshan, T. S.. 2010. "Sensors, actuators, and intelligent processing [Preface]." Materials and Manufacturing Processes. 25 (4), pp. 211-211. https://doi.org/10.1080/10426910903425036
Behaviour of structural fibre composite sandwich panels under point load and uniformly distributed load
Islam, Md Mainul and Aravinthan, Thiru. 2010. "Behaviour of structural fibre composite sandwich panels under point load and uniformly distributed load." Composite Structures. 93 (1), pp. 206-215. https://doi.org/10.1016/j.compstruct.2010.05.019
Polymer based filler materials as infill for GFRP pile connector
Sirimanna, Chamila Sampath, Islam, Md Mainul and Aravinthan, Thiru. 2011. "Polymer based filler materials as infill for GFRP pile connector." Key Engineering Materials. 471-472, pp. 763-768. https://doi.org/10.4028/www.scientific.net/KEM.471-472.763
Fabrication and characterization of unidirectional silk fibre composites
Ahmed, Mansur, Islam, Md Saiful, Ahsan, Qumrul and Islam, Md Mainul. 2011. "Fabrication and characterization of unidirectional silk fibre composites." Key Engineering Materials. 471-472 (1), pp. 20-25. https://doi.org/10.4028/www.scientific.net/KEM.471-472.20
Flexural behaviour of structural fibre composite sandwich beams in flatwise and edgewise positions
Manalo, A. C., Aravinthan, T., Karunasena, W. and Islam, M. M.. 2010. "Flexural behaviour of structural fibre composite sandwich beams in flatwise and edgewise positions." Composite Structures. 92 (4), pp. 984-995. https://doi.org/10.1016/j.compstruct.2009.09.046
Pre-mould processing technique for syntactic foams: generalised modelling, theory and experiment
Islam, Md Mainul and Kim, Ho Sung. 2011. "Pre-mould processing technique for syntactic foams: generalised modelling, theory and experiment." Journal of Materials Processing Technology. 211 (4), pp. 708-716. https://doi.org/10.1016/j.jmatprotec.2010.12.006
Mechanical and thermal properties of untreated and chemically treated jute fibre reinforced composites
Kabir, Mohammad Mazedul, Islam, Md Mainul and Wang, Hao. 2010. "Mechanical and thermal properties of untreated and chemically treated jute fibre reinforced composites." 1st International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE 2010) . Khulna, Bangladesh 23 - 24 Dec 2010 Khulna, Bangladesh.
An overview on syntactic foam core and paper skin sandwich composites as potential building materials
Islam, Md Mainul, Kim, Ho Sung and Kabir, Mohammad Mazedul. 2010. "An overview on syntactic foam core and paper skin sandwich composites as potential building materials." 2010 International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE2010). Khulna, Bangladesh 23 - 24 Dec 2010 Khulna, Bangladesh.
Response Fibre Bragg Grating (FBG) strain sensors embedded at different locations through the thickness around a delamination in a composite lamina
Epaarachchi, Jayantha A., Rathnaweera, Gayan, Canning, John and Stevenson, Michael. 2010. "Response Fibre Bragg Grating (FBG) strain sensors embedded at different locations through the thickness around a delamination in a composite lamina." 7th Asian-Australasian Conference on Composites (ACCM7). Taipei, Taiwan 15 - 18 Nov 2010 Taipei, Taiwan.
Performance of aluminium/vinylester particulate composite
Epaarachchi, Jayantha A. and Reushle, Matthew T.. 2010. "Performance of aluminium/vinylester particulate composite." Nie, Jian-Feng and Morton, Allan (ed.) PRICM7: 7th Pacific Rim International Conference on Advanced Materials and Processing. Cairns, Australia 02 - 06 Aug 2010 Zurich, Switzerland. https://doi.org/10.4028/www.scientific.net/MSF.654-656.2656
Effects of temperature on a pultruded FRP composite
Sirimanna, Chamila S., Islam, Md Mainul and Aravinthan, Thiru. 2010. "Effects of temperature on a pultruded FRP composite." Teh, Kian, Davies, Ian and Howard, Ian (ed.) 6th Australasian Congress on Applied Mechanics (ACAM 6). Perth, Western Australia 12 - 15 Dec 2010 Perth, Australia.
An investigation of spectral response of embedded Fibre Bragg Grating (FBG) sensors in a hollow composite cylindrical beam under pure torsion and combined loading
Kahandawa, Gayan C., Epaarachchi, Jayantha A., Wang, Hao, Followell, David, Birt, Peter, Canning, John and Stevenson, Michael. 2010. "An investigation of spectral response of embedded Fibre Bragg Grating (FBG) sensors in a hollow composite cylindrical beam under pure torsion and combined loading." Teh, Kian, Davies, Ian and Howard, Ian (ed.) 6th Australasian Congress on Applied Mechanics (ACAM 6). Perth, Western Australia 12 - 15 Dec 2010 Perth, Australia.
Effects of the self distortions of embedded FBG sensors on spectral response due to torsional and combined loads
Kahandawa, Gayan C., Epaarachchi, Jayantha A., Wang, Hao and Canning, John. 2010. "Effects of the self distortions of embedded FBG sensors on spectral response due to torsional and combined loads." 3rd Asia-Pacific Workshop on Structural Health Monitoring (APWSHM 2010). Tokyo, Japan 30 Nov - 02 Dec 2010 Tokyo, Japan.
An overview on the application of FRP composites in piling system
Guades, E. J., Aravinthan, T. and Islam, M. M.. 2010. "An overview on the application of FRP composites in piling system." Goh, Steven C. and Wang, Hao (ed.) 2010 Southern Region Engineering Conference (SREC 2010). Toowoomba, Australia 11 - 12 Nov 2010 Canberra, Australia.
The response of embedded NIR (830 nm) fiber Bragg grating sensors in glass fiber composites under fatigue loading
Epaarachchi, Jayantha A., Canning, John and Stevenson, Michael. 2010. "The response of embedded NIR (830 nm) fiber Bragg grating sensors in glass fiber composites under fatigue loading." Journal of Composite Materials. 44 (7), pp. 809-819. https://doi.org/10.1177/0021998309346382
Physical and tensile properties of raw and treated silk fibres
Ahmed, Mansur, Islam, Md Saiful, Ahsan, Qumrul and Islam, Md Mainul. 2010. "Physical and tensile properties of raw and treated silk fibres." 2nd International Conference on Natural Polymers, Bio-Polymers, Bio-Materials, their Composites, Blends, IPN's and Gels Polyelectrolytes and Gels: Macro to Nano Scales (ICNP - 2010). Kottayam, India 24 - 26 Sep 2010 India.
Manufacturing and behaviour of sandwich composites made of starch as binder for core and adhesive between core and skins
Islam, Md Mainul and Kim, Ho Sung. 2010. "Manufacturing and behaviour of sandwich composites made of starch as binder for core and adhesive between core and skins." 2nd International Conference on Natural Polymers, Bio-Polymers, Bio-Materials, their Composites, Blends, IPN's and Gels Polyelectrolytes and Gels: Macro to Nano Scales (ICNP - 2010). Kottayam, India 24 - 26 Sep 2010 India.
Investigation for a suitable screw of a briquetting machine
Ali, Md Nawsher, Islam, Md Mainul and Ferdous, Chy. Md Refaul. 2004. "Investigation for a suitable screw of a briquetting machine." Hossain, M. Imtiaz (ed.) 2nd BSME-ASME lnternational Conference on Thermal Engineering. Dhaka, Bangladesh 02 - 04 Jan 2004 Dhaka, Bangladesh.
An overview of energy profile for Bangladesh: past, present and future uses
Khan, Kamrujjaman, Islam, Md Mainul, Rahman, M. L. and Ali, Md Nawsher. 2003. "An overview of energy profile for Bangladesh: past, present and future uses." 2003 National Seminar on the Role of Renewable and Alternative Energy Sources for National Development (SRRAESND-2003). Khulna, Bangladesh 19 - 20 Dec 2003 Pathumthani, Thailand.
An investigation on the raw materials and products of the briquetting machine
Islam, Md Mainul, Khan, Kamrujjaman, Ali, Md Nawsher and Islam, Md Shahidul. 2003. "An investigation on the raw materials and products of the briquetting machine." 2003 National Seminar on the Role of Renewable and Alternative Energy Sources for National Development (SRRAESND-2003). Khulna, Bangladesh 19 - 20 Dec 2003 Pathumthani, Thailand.
Syntactic foams as building materials consisting of inorganic hollow microspheres and starch binder
Kim, Ho Sung and Islam, Md Mainul. 2009. "Syntactic foams as building materials consisting of inorganic hollow microspheres and starch binder." Cornejo, Donald N. and Haro, Jason L. (ed.) Building materials: properties, performance and applications. New York, USA. Nova Science Publishers.
Dynamic behaviour of laterally loaded pultruted composite beams
Epaarachchi, Jayantha A. and Birt, Peter. 2009. "Dynamic behaviour of laterally loaded pultruted composite beams." Dyckmans, Gunther (ed.) 9th International Conference of the Mechanical and Physical Behaviour of Materials Under Dynamic Loading (DYMAT 2009). Brussels, Belgium 07 - 11 Sep 2009 France.
Behaviour of innovative fibre composite sandwich panels
Islam, Md Mainul. 2009. "Behaviour of innovative fibre composite sandwich panels." Workshop on Life Cycle Assessment of Sustainable FRP Materials (2009). Saitama, Japan 14 Dec 2009
Behaviour of innovative fibre composite sandwich panels under point loading
Islam, M. M., Aravinthan, T. and Van Erp, G.. 2009. "Behaviour of innovative fibre composite sandwich panels under point loading." Sim, Jongsung (ed.) 2nd Asia-Pacific Conference on FRP in Structures (APFIS 2009). Seoul, Korea 09 - 11 Dec 2009 Seoul, Korea.
Solar photovoltaic technology and Bangladesh
Ferdous, C. M. R., Islam, M. Shahidul, Islam, M. Mainul, Alam, M. M. Asraful and Rahman, A. N. M.Mizanur. 2003. "Solar photovoltaic technology and Bangladesh." 2003 National Seminar on the Role of Renewable and Alternative Energy Sources for National Development (SRRAESND-2003). Khulna, Bangladesh 19 - 20 Dec 2003 Pathumthani, Thailand.
Evaluation of the properties of raw materials and products of briquetting machine
Islam, Md Mainul, Ali, Md Nawsher and Mia, Sobahan. 2004. "Evaluation of the properties of raw materials and products of briquetting machine." Hossain, M. Imtiaz (ed.) 2nd BSME-ASME International Conference on Thermal Engineering. Dhaka, Bangladesh 02 - 04 Jan 2004 Dhaka, Bangladesh.
Effects of static fatigue on the tension-tension fatigue life of glass / polyester composites
Epaarachchi, Jayantha A.. 2005. "Effects of static fatigue on the tension-tension fatigue life of glass / polyester composites." Xie, Mike, Mouritz, Adrian, Khatibi, Akbar Afaghi, Gardiner, Craig and Chiu, Wing Kong (ed.) 4th Australasian Congress on Applied Mechanics (ACAM 2005): Advances in Applied Mechanics. Melbourne, Australia 16 - 18 Feb 2005 North Melbourne, Vic, Australia.
Crack opening behavior in aluminum alloy 5083
Islam, Md Mainul and Watanabe, Taiji. 2003. "Crack opening behavior in aluminum alloy 5083." Journal of Mechanical Engineering, Institution of Engineers, Bangladesh. ME 32, pp. 26-35.
A simplified empirical model for prediction of mechanical properties of random short fiber/vinylester composites
Epaarachchi, J., Ku, H. and Gohel, K.. 2010. "A simplified empirical model for prediction of mechanical properties of random short fiber/vinylester composites." Journal of Composite Materials. 44 (6), pp. 779-788. https://doi.org/10.1177/0021998309346383
Flexural behaviour of composite sandwiches for structural applications
Manalo, Allan, Aravinthan, Thiru, Karunasena, Warna and Islam, Mainul. 2009. "Flexural behaviour of composite sandwiches for structural applications." Oehlers, D. J., Griffith, M. C. and Seracino, R. (ed.) 9th International Symposium on Fibre Reinforced Polymers for Reinforced Concrete Structures (FRPRCS-9): Current Challenges and Future Trends. Sydney, Australia 13 - 15 Jul 2009 Adelaide, Australia.
An overview on manufacturing and properties of syntactic foams made of ceramic hollow microspheres and starch
Islam, M. M. and Kim, H. S.. 2009. "An overview on manufacturing and properties of syntactic foams made of ceramic hollow microspheres and starch ." Aravinthan, Thiru, Karunasena, Warna and Wang, Hao (ed.) 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM20). Toowoomba, Australia 02 - 05 Dec 2008 London, United Kingdom.
Properties and mechanical behaviour of novel sandwich composites made of syntactic foam and paper skin
Islam, Md Mainul and Kim, Ho Sung. 2007. "Properties and mechanical behaviour of novel sandwich composites made of syntactic foam and paper skin." Veidt, Martin, Albermani, Faris, Daniel, Bill, Griffiths, John, Hargreaves, Doug, McAree, Ross, Meehan, Paul and Tan, Andy (ed.) 5th Australasian Congress on Applied Mechanics (ACAM 2007). Brisbane, Australia 10 - 12 Dec 2007 Sydney, Australia.
Investigation of dynamic behaviour of a hybrid composite bridge girder
Epaarachchi, Jayantha A., Karunasena, Warna and Aravinthan, Thiru. 2007. "Investigation of dynamic behaviour of a hybrid composite bridge girder." Marshall, Ian (ed.) 14th International Conference on Composite Structures (ICCS 14). Melbourne, Australia 19 - 21 Nov 2007 Melbourne, Australia.
An investigation of the response of embedded near infrared fibre bragg grating (FBG) sensors (830nm) in glass fibre composites under fatigue loading
Epaarachchi, Jayantha A., Canning, John and Stevenson, Michael. 2007. "An investigation of the response of embedded near infrared fibre bragg grating (FBG) sensors (830nm) in glass fibre composites under fatigue loading." Marshall, Ian (ed.) 14th International Conference on Composite Structures (ICCS 14). Melbourne, Australia 19 - 21 Nov 2007 Melbourne, Australia.
Investigation of the use of near infrared FBG (830nm) sensors for monitoring the structural response of 0/90 woven cloth/CSM glass fibre/vynylester composite under static and fatigue loading
Epaarachchi, Jayantha A., Clegg, Richard E. and Canning, John. 2007. "Investigation of the use of near infrared FBG (830nm) sensors for monitoring the structural response of 0/90 woven cloth/CSM glass fibre/vynylester composite under static and fatigue loading." HUMS 2007: 5th DSTO International Conference on Health and Usage Monitoring . Melbourne, Australia 19 - 22 Mar 2007 Australia.
An experimental investigation of the properties of cross-ply laminate used for manufacturing of small aircraft components
Epaarachchi, Jayantha A. and Clegg, Richard. 2006. "An experimental investigation of the properties of cross-ply laminate used for manufacturing of small aircraft components." Composite Structures. 75 (1-4), pp. 93-99. https://doi.org/10.1016/j.compstruct.2006.04.080
A study of estimation of damage accumulation of glass fibre reinforce plastic (GFRP) composites under a block loading situation
Epaarachchi, Jayantha A.. 2006. "A study of estimation of damage accumulation of glass fibre reinforce plastic (GFRP) composites under a block loading situation." Composite Structures. 75 (1-4), pp. 88-92. https://doi.org/10.1016/j.compstruct.2006.04.063
The development of a fatigue loading spectrum for small wind turbine blades
Epaarachchi, Jayantha A. and Clausen, Philip D.. 2006. "The development of a fatigue loading spectrum for small wind turbine blades." Journal of Wind Engineering and Industrial Aerodynamics. 94, pp. 207-223. https://doi.org/10.1016/j.jweia.2005.12.007
Effects of static-fatigue (tension) on the tension-tension fatigue life of glass fibre reinforced plastic composites
Epaarachchi, Jayantha A.. 2006. "Effects of static-fatigue (tension) on the tension-tension fatigue life of glass fibre reinforced plastic composites." Composite Structures. 74 (4), pp. 419-425. https://doi.org/10.1016/j.compstruct.2005.04.022
A new cumulative fatigue damage model for glass fibre reinforced plastic composites under step/discrete loading
Epaarachchi, Jayantha A. and Clausen, Philip D.. 2005. "A new cumulative fatigue damage model for glass fibre reinforced plastic composites under step/discrete loading." Composites Part A: Applied Science and Manufacturing. 36 (9), pp. 1236-1245. https://doi.org/10.1016/j.compositesa.2005.01.021
An empirical model for fatigue behavior prediction of glass fibre-reinforced plastic (GFRP) composites for various stress ratios and test frequencies
Epaarachchi, Jayantha A. and Clausen, Philip D.. 2003. "An empirical model for fatigue behavior prediction of glass fibre-reinforced plastic (GFRP) composites for various stress ratios and test frequencies." Composites Part A: Applied Science and Manufacturing. 34 (4), pp. 313-326. https://doi.org/10.1016/S1359-835X(03)00052-6