Manufacture of syntactic foams using starch as binder: post-mold processing

Article

Islam, Md Mainul and Kim, Ho Sung. 2008. "Manufacture of syntactic foams using starch as binder: post-mold processing." Materials and Manufacturing Processes. 23 (8), pp. 884-892. https://doi.org/10.1080/10426910802413661
Article Title

Manufacture of syntactic foams using starch as binder: post-mold processing

ERA Journal ID3642
Article CategoryArticle
AuthorsIslam, Md Mainul (Author) and Kim, Ho Sung (Author)
Journal TitleMaterials and Manufacturing Processes
Journal Citation23 (8), pp. 884-892
Number of Pages9
Year2008
Place of PublicationUnited States
ISSN1042-6914
1532-2475
Digital Object Identifier (DOI)https://doi.org/10.1080/10426910802413661
Abstract

Syntactic foam manufacturing method, ‘post-mold processing,’ based on the buoyancy of hollow microspheres was studied for potential building material applications. The post-mold processing involves mixing starch particles and ceramic hollow microspheres in water. It was found
starch particles tend to adhere to hollow microspheres, forming agglomerations, during mixing. It was also found that “volume fraction of starch particles on a microsphere making a relative density of 1.0” (VFSMRD) is an indicator for mixture volume transitions. Both the maximum total
volume expansion of mixture and a transition in formation, after phase separation, of mixture volume in water referred to as “top phase” in a mixing container were taken place at a calculated VFSMRD. It was found that hollow microsphere size effect on attracting starch particles was relatively high but IBVMS effect was not significant. Also, no effect of water volume for a given diameter of cylindrical container was found. Starch-microsphere inter-distance was discussed and considered to be an important parameter affecting starch content in an agglomeration. A Simple Cubic cell model for the starch-microsphere inter-distance was adopted to quantitatively explain various effects on starch content in agglomeration such as hollow microsphere size, initial bulk volume of hollow microspheres (IBVMS), and water volume. Further, the following were found for manufactured syntactic foams: (a) volume fraction of starch in foam is of linear relation with starch content before mixing for a given experimental data range and (b)shrinkage is relatively high for small hollow microspheres with high starch content.

Keywordsagglomeration; bulk volume; bulk volume expansion; buoyancy; gelatinization; hollow microsphere; manufacture; mixing; model; phase volume; post-mold processing; shrinkage; simple cubic cell; starch; syntactic foam; transition
ANZSRC Field of Research 2020400505. Construction materials
401602. Composite and hybrid materials
490109. Theoretical and applied mechanics
Public Notes

File reproduced in accordance with the copyright policy of the publisher/author.

Byline AffiliationsCentre of Excellence in Engineered Fibre Composites
University of Newcastle
Permalink -

https://research.usq.edu.au/item/9yx3x/manufacture-of-syntactic-foams-using-starch-as-binder-post-mold-processing

Log in to edit

Download files

Accepted Version
Islam_Kim_MMP_v23n8_Author_version.pdf
File access level: Anyone

  • 2150
    total views
  • 484
    total downloads
  • 4
    views this month
  • 0
    downloads this month

Export as

Related outputs

Sustainable macadamia nutshell-based particulate composites: Mechanical performance and application potential in structural materials
Islam, Md Mainul, Bode, Rajesh Reddy, Dumaru, Sanjay Shrestha and Singh, Onkar Deep. 2025. "Sustainable macadamia nutshell-based particulate composites: Mechanical performance and application potential in structural materials." Journal of Sustainable Smart Materials and Structural Systems (JSSMSS) . 1, pp. 1-8.
Development of novel composite core using powdered macadamia nutshell and its sandwich structures for building and other engineering applications
Islam, Md Mainul, Chowdhury, Sutirtha and Khan, Md Sefat. 2025. "Development of novel composite core using powdered macadamia nutshell and its sandwich structures for building and other engineering applications." Materials. 18 (18). https://doi.org/10.3390/ma18184369
Advancing Sustainable Materials: Fabrication and Performance of Macadamia Nutshell Composite Cores and Sandwich Structures
Islam, Md Mainul. 2025. "Advancing Sustainable Materials: Fabrication and Performance of Macadamia Nutshell Composite Cores and Sandwich Structures." Precision Global Forum on Polymer Science and Engineering (PPOLY2025). Tokyo, Japan 10 - 12 Sep 2025 Japan.
Syntactic Foams and Foam Core Composites
Islam, Md Mainul and Arthanayake, Chayana. 2025. "Syntactic Foams and Foam Core Composites." International Experts Summit on Material Science (IESMSSO2025). London, United Kingdom 04 - 06 Aug 2025 United Kingdom.
A review of the recent advances in heat transfer through ducting in the rotational moulding process and the future trends
Chowdhury, Sutirtha, Epaarachchi, Jayantha, Sharifian-Barforoush, Ahmad and Islam, Md Mainul. 2025. "A review of the recent advances in heat transfer through ducting in the rotational moulding process and the future trends." International Journal of Thermofluids. 27 (2025). https://doi.org/10.1016/j.ijft.2025.101239
Advancing Epoxy Prepreg Technology: Innovations in Formulation, Processing, and Applications
Islam, Mainul, Somarathna, Yashoda, Epaarachchi, Jayantha and Herath, Madhubhashitha. 2025. "Advancing Epoxy Prepreg Technology: Innovations in Formulation, Processing, and Applications." International Materials Summit 2025. Boston, MA, United States 17 - 19 Feb 2025
Manufacturing and Properties of Jute Fiber-Reinforced Polymer Composites—A Comprehensive Review
Iqbal, Raiyan Mohammad, Ahammad, Raju, Arifuzzaman, Md, Islam, Md Shariful and Islam, Md Mainul. 2025. "Manufacturing and Properties of Jute Fiber-Reinforced Polymer Composites—A Comprehensive Review ." Materials. 18 (5). https://doi.org/10.3390/ma18051016
Flexural and Flammability Characteristics of Woven Jute Fabric Reinforced Vinyl Ester Treated with Ammonium Polyphosphate
Misnon, Mohd Iqbal, Rodzi, Khairul Naseem Mohd, Fajrin, Jauhar and Islam, Md Mainul. 2024. "Flexural and Flammability Characteristics of Woven Jute Fabric Reinforced Vinyl Ester Treated with Ammonium Polyphosphate." International Conference on Wood and Eco-Products 2022 (ICWEP 2022). Selangor, Malaysia 15 - 16 Nov 2022 United Kingdom. https://doi.org/10.21834/e-bpj.v9iSI17.5421
Development of Novel Elastomeric Composites Using Agricultural and Industrial Wastes
Islam, Md Mainul. 2024. "Development of Novel Elastomeric Composites Using Agricultural and Industrial Wastes." 8th Global Conference & Expo on Materials Science and Engineering. Dubai, UAE 18 - 19 Nov 2024 Dubai, UAE.
Engineering Education Challenges Addressed Through a Case Study
Islam, Md Mainul. 2024. "Engineering Education Challenges Addressed Through a Case Study." 35th Annual Conference of the Australasian Association for Engineering Education (AAEE 2024). Christchurch, New Zealand 08 - 11 Dec 2024 New Zealand.
Formulation of Epoxy Prepregs, Synthesization Parameters, and Resin Impregnation Approaches—A Comprehensive Review
Epaarachchi, Jayantha, Somarathna, Yashoda, Herath, Madhubhashitha and Islam, Md Mainul. 2024. "Formulation of Epoxy Prepregs, Synthesization Parameters, and Resin Impregnation Approaches—A Comprehensive Review ." Polymers. 16 (23). https://doi.org/10.3390/polym16233326
Optimising nanoparticle dispersion time for enhanced thermomechanical properties in DGEBA-based shape memory polymer composites
Jeewantha, Janitha, Epaarachchi, Jayantha and Islam, Md Mainul. 2024. "Optimising nanoparticle dispersion time for enhanced thermomechanical properties in DGEBA-based shape memory polymer composites." Journal of Research Updates in Polymer Science. 13, pp. 147-150.
Burden turns into benefit: Potentiality of macadamia nutshells for engineered polymer composites
Islam, Md Mainul, Khan, Md Sefat and Epaarachchi, Jayantha. 2024. "Burden turns into benefit: Potentiality of macadamia nutshells for engineered polymer composites." International Journal of Management and Applied Science (IJMAS). 10 (1), pp. 169-179.
Addressing Challenges in Engineering Education: A Case Study of Materials Technology Course
Islam, Md Mainul. 2024. "Addressing Challenges in Engineering Education: A Case Study of Materials Technology Course." Educational Research Applications. 9 (1). https://doi.org/10.29011/2575-7032.100232
Exploring the Prospects of Macadamia Nutshells for Bio-Synthetic Polymer Composites: A Review
Khan, Md Sefat, Islam, Md Mainul, Epaarachchi, Jayantha and Shibata, Shinichi. 2023. "Exploring the Prospects of Macadamia Nutshells for Bio-Synthetic Polymer Composites: A Review." Polymers. 2023 (15). https://doi.org/10.3390/polym15194007
Thermo-Mechanical Behavior of Green Sandwich Structures for Building and Construction Applications
Hossain, Forhad, Arifuzzaman, Md, Islam, Md Shariful and Islam, Md Mainul. 2023. "Thermo-Mechanical Behavior of Green Sandwich Structures for Building and Construction Applications." Processes. 2023 (11). https://doi.org/10.3390/pr11082456
Investigation of Gas Release from Recycled Plastic Shopping Bags during Melting at Low Temperatures
Eberhard, Susette, Bowtell, Les, Lenske, Brian and Islam, Mainul. 2023. "Investigation of Gas Release from Recycled Plastic Shopping Bags during Melting at Low Temperatures." Advances in Materials Science and Engineering. 2023, pp. 1-9. https://doi.org/10.1155/2023/2378231
Enhancement of the Mechanical and Thermal Properties of Polypropylene and Nylon 6.6 Composite Blends
Al-Haik, Mohammad Yousef, Aldajah, Saud Hamad, Kabir, Mohammad Mazedul, Siddique, Waseem Ahmad, Haik, Yousef and Islam, Md Mainul. 2023. "Enhancement of the Mechanical and Thermal Properties of Polypropylene and Nylon 6.6 Composite Blends." Advances in Materials Science and Engineering. 2023. https://doi.org/10.1155/2023/6535067
Shape memory polymer smart plaster for orthopaedic treatments
Jeewantha, Janitha, Jayalath, Sandaruwan, Emmanuel, Chris, Herath, Madhubhashitha, Forster, Elizabeth, Islam, Mainul, Leng, Jinsong and Epaarachchi, Jayantha. 2022. "Shape memory polymer smart plaster for orthopaedic treatments." Smart Materials and Structures. 31 (11), pp. 1-14. https://doi.org/10.1088/1361-665X/ac943b
Early research of shape memory polymer vascular stents
Jeewantha, Lama Hewage Janitha, Epaarachchi, Jayantha Ananda, Forster, Elizabeth, Islam, Mainul and Leng, Jinsong. 2022. "Early research of shape memory polymer vascular stents." Express Polymer Letters. 16 (9), pp. 902-923. https://doi.org/10.3144/expresspolymlett.2023.49
Investigation of curing kinetics and internal strains to enhance performances of bisphenol A based shape memory polymers
Jeewantha, L. H. J., Emmanuel, K. D. C., Herath, H. M. C. M., Epaarachchi, J. A., Islam, M. M. and Leng, J.. 2022. "Investigation of curing kinetics and internal strains to enhance performances of bisphenol A based shape memory polymers." Materialia. 21. https://doi.org/10.1016/j.mtla.2021.101264
Development and characterization of shape memory polymers for non-invasive biomedical applications
Jeewantha, Janitha, Emmanuel, Chris, Herath, Madhubhashitha, Islam, Mainul and Epaarachchi, Jayantha. 2021. "Development and characterization of shape memory polymers for non-invasive biomedical applications." ASME 2021 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS2021). United States and Online New York, United States. https://doi.org/10.1115/SMASIS2021-66024
Fabric Parameter Effect on the Mechanical Properties of Woven Hemp Fabric Reinforced Composites as an Alternative to Wood Products
Misnon, I. M., Islam, M. M., Epaarachchi, J. A., Lau, K. T. and Wang, H.. 2016. "Fabric Parameter Effect on the Mechanical Properties of Woven Hemp Fabric Reinforced Composites as an Alternative to Wood Products." Advance Research in Textile Engineering. 1 (1).
Multi-attribute parametric optimisation of shape memory polymer properties for adaptive orthopaedic plasters
Jeewantha, L. H. J., Emmanuel, K. D. C., Herath, H. M. C. M., Islam, M. M., Fang, L. and Epaarachchi, J. A.. 2022. "Multi-attribute parametric optimisation of shape memory polymer properties for adaptive orthopaedic plasters." Materialia. 21, pp. 1-12. https://doi.org/10.1016/j.mtla.2022.101325
Effect of hemp fibre surface treatment on the fibre-matrix interface and the influence of cellulose, hemicellulose and lignin contents on composite strength properties
Kabir, Mohammad Mazedul, Alhaik, Mohammad Yousef, Aldajah, Saud Hamad, Lau, Kin Tak, Wang, Hao and Islam, Md Mainul. 2021. "Effect of hemp fibre surface treatment on the fibre-matrix interface and the influence of cellulose, hemicellulose and lignin contents on composite strength properties." Advances in Materials Science and Engineering. 2021, pp. 1-17. https://doi.org/10.1155/2021/9753779
Effect of dispersion time for nanoparticles in DGEBA shape memory polymer composite fabrication
Islam, Mainul. 2022. "Effect of dispersion time for nanoparticles in DGEBA shape memory polymer composite fabrication." Sapuan, S. M. et al. (ed.) International Symposium on Polymeric Materials 2022 (ISPM2022). Malaysia 14 - 15 Jun 2022 Malaysia.
Carbon fibre reinforced shape memory polymer composites for deployable space habitats
Herath, H. M. C. M., Epaarachchi, J. A., Islam, M. M. and Leng, J.. 2019. "Carbon fibre reinforced shape memory polymer composites for deployable space habitats." Engineer: Journal of the Institution of Engineers. LII (1), pp. 1-9. https://doi.org/10.4038/engineer.v52i1.7323
Failure analysis and design of grouted fibre-composite repair system for corroded steel pipes
Shamsuddoha, Md, Manalo, Allan, Aravinthan, Thiru, Islam, Md Mainul and Djukic, Luke. 2021. "Failure analysis and design of grouted fibre-composite repair system for corroded steel pipes." Engineering Failure Analysis. 119, pp. 1-15. https://doi.org/10.1016/j.engfailanal.2020.104979
Development of Smart Materials for Invasive Medical Applications Using Shape Memory Polymers
Jeewantha, Lama Hewage Janitha, Islam, Md Mainul and Epaarachchi, Jayantha Ananda. 2020. "Development of Smart Materials for Invasive Medical Applications Using Shape Memory Polymers." 6th International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE 2020). Khulna, Bangladesh 19 - 21 Dec 2020 Bangladesh.
Flexural Analysis for Syntactic Foam Sandwich Panels
Salleh, Zulzamri, Islam, M., Epaarachchi, J., Zulkarnain, M. and Ahmed, Yaseen Adenan. 2020. "Flexural Analysis for Syntactic Foam Sandwich Panels." Saw, Chun Lin, Woo, Tze Keong, Singh, Salvinder Singh a/l Karam and Salim, Didi Asmara Bin (ed.) Regional Conference on Marine and Mechanical Engineering (ReMME'18). Ipoh, Malaysia 07 - 09 Nov 2018 Singapore. https://doi.org/10.1007/978-981-15-0002-2_5
Mechanical and thermal properties of glass fiber–vinyl ester resin composite for pipeline repair exposed to hot-wet conditioning
Shamsuddoha, Md, Djukic, Luke P., Islam, Md Mainul, Aravinthan, Thiru and Manalo, Allan. 2017. "Mechanical and thermal properties of glass fiber–vinyl ester resin composite for pipeline repair exposed to hot-wet conditioning." Journal of Composite Materials. 51 (11), pp. 1605-1617. https://doi.org/10.1177/0021998316661869
Recent Progress in Shape Memory Polymers in Biomedical Applications
Jeewantha, Lama Hewage Janitha, Islam, Md Mainul and Epaarachchi, Jayantha Amanda. 2019. "Recent Progress in Shape Memory Polymers in Biomedical Applications." Yang, Richard, Zhang, Leo, Zhao, Ming, Fang, Gu and Islam, Rafiqul (ed.) 1st International Conference on Mechanical and Manufacturing Engineering Research and Practice (iCMMERP-2019). Sydney, Australia 24 - 28 Nov 2019 Sydney, Australia.
Light activated shape memory polymers and composites: A review
Herath, Madhubhashitha, Epaarachchi, Jayantha, Islam, Mainul, Fang, Liang and Leng, Jinsong. 2020. "Light activated shape memory polymers and composites: A review." European Polymer Journal. 136, pp. 1-27. https://doi.org/10.1016/j.eurpolymj.2020.109912
Effects of Different Relative Humidities on Flax Fibers prior to Manufacturing Their Composites Based on the Shear Response
Moudood, Abdul, Rahman, Anisur, Ochsner, Andreas, Islam, Md Mainul, Ali, Mohammad Yeakub and Francucci, Gaston. 2020. "Effects of Different Relative Humidities on Flax Fibers prior to Manufacturing Their Composites Based on the Shear Response." Advances in Materials Science and Engineering. 2020, pp. 1-7. https://doi.org/10.1155/2020/4785970
Mechanical properties of flax fiber‐reinforced composites at different relative humidities: Experimental, geometric, and displacement potential function approaches
Moudood, Abdul, Rahman, Anisur, Huq, Nayeem Md Lutful, Ochsner, Andreas, Islam, Md Mainul and Francucci, Gaston. 2020. "Mechanical properties of flax fiber‐reinforced composites at different relative humidities: Experimental, geometric, and displacement potential function approaches." Polymer Composites. 41 (12), pp. 4963-4973. https://doi.org/10.1002/pc.25766
Performance investigation of two AE source location techniques on a Planar Multilayer Structure
Hassan, Md. Mehedi, Khan, Md. Tawhidul Islam, Hasemura, Yuji and Islam, Md. Mainul. 2020. "Performance investigation of two AE source location techniques on a Planar Multilayer Structure." International Journal of Acoustics and Vibration. 25 (2), pp. 226-235. https://doi.org/10.20855/ijav.2020.25.21635
Performance of rare earth organic complexes based light activated shape memory polymer composites
Herath, Madhubhashitha, Epaarachchi, Jayantha, Islam, Mainul, Fang, Liang, Zhang, Fenghua and Leng, Jinsong. 2019. "Performance of rare earth organic complexes based light activated shape memory polymer composites." 22nd International Conference on Composite Materials (ICCM-22). Melbourne, Australia 11 - 16 Aug 2019 Australia.
Remote actuation of light activated shape memory polymers via D-shaped optical fibres
Herath, Madhubhashitha, Epaarachchi, Jayantha, Islam, Mainul, Zhang, Fenghua, Leng, Jinsong, Fang, Liang, Yan, Cheng, Peng, Gang Ding and Schade, Wolfgang. 2020. "Remote actuation of light activated shape memory polymers via D-shaped optical fibres." Smart Materials and Structures. 29 (4), pp. 1-8. https://doi.org/10.1088/1361-665X/ab72ea
4D printed shape memory polymer composite structures for deployable small spacecrafts
Herath, Madhubhashitha, Islam, Mainul, Epaarachchi, Jayantha, Zhang, Fenghua and Leng, Jinsong. 2019. "4D printed shape memory polymer composite structures for deployable small spacecrafts." ASME 2019 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS 2019). Louisville, United States 09 - 11 Sep 2019 United States. https://doi.org/10.1115/SMASIS2019-5583
Near infrared light activated shape memory polymer composite for space applications
Herath, Madhubhashitha, Epaarachchi, Jayantha, Islam, Mainul and Leng, Jinsong. 2018. "Near infrared light activated shape memory polymer composite for space applications." Wang, Hao (ed.) 11th Asian-Australasian Conference on Composite Materials (ACCM-11). Cairns, Australia 29 Jul - 01 Aug 2018
Compression and flexural properties of ground macadamia nutshell particulate composites
Bode, Rajesh Reddy, Islam, Md Mainul and Mahmood, Muhammad Nateque. 2018. "Compression and flexural properties of ground macadamia nutshell particulate composites." Wang, Hao (ed.) 11th Asian-Australasian Conference on Composite Materials (ACCM-11). Cairns, Australia 29 Jul - 01 Aug 2018
Effects of selectively triggered photothermal particles on shape memory polymer composites: an investigation on structural performance, thermomechanical characteristics and photothermal behaviour
Herath, Madhubhashitha, Epaarachchi, Jayantha, Islam, Mainul, Yan, Cheng, Zhang, Fenghua and Leng, Jinsong. 2019. "Effects of selectively triggered photothermal particles on shape memory polymer composites: an investigation on structural performance, thermomechanical characteristics and photothermal behaviour." Journal of Intelligent Material Systems and Structures. 30 (20), pp. 3124-3135. https://doi.org/10.1177/1045389X19879998
Fatigue crack analysis of ferrite material by acoustic emission technique
Khan, Md. T. I., Rashid, A. A., Hidaka, R., Hattori, N. and Islam, Md. M.. 2019. "Fatigue crack analysis of ferrite material by acoustic emission technique." Journal of Mechanical Engineering and Sciences. 13 (2), pp. 5074-5089. https://doi.org/10.15282/jmes.13.2.2019.21.0418
Thermo-mechanical properties of fused borosilicate syntactic foams
Salleh, Z., Islam, M. M., Epaarachchi, J. A. and Khan, M. T. I.. 2019. "Thermo-mechanical properties of fused borosilicate syntactic foams." Journal of Mechanical Engineering and Sciences. 13 (2), pp. 4898-4910. https://doi.org/10.15282/jmes.13.2.2019.10.0407
An investigation on the student performance in first year fundamental engineering course, Engineering Statics
Islam, Md Mainul and Epaarachchi, Jayantha Ananda. 2018. "An investigation on the student performance in first year fundamental engineering course, Engineering Statics." Educational Research Applications. 2018 (01), pp. 1-5. https://doi.org/10.29011/2575-7032/100044
Flax fiber and its composites: an overview of water and moisture absorption impact on their performance
Moudood, Abul, Rahman, Anisur, Ochsner, Andreas, Islam, Mainul and Francucci, Gaston. 2019. "Flax fiber and its composites: an overview of water and moisture absorption impact on their performance." Journal of Reinforced Plastics and Composites. 38 (7), pp. 323-339. https://doi.org/10.1177/0731684418818893
Sediment color tool for targeting arsenic-safe aquifers for the installation of shallow drinking water tubewells
Hossain, Mohammed, Bhattacharya, Prosun, Frape, Shaun K., Jacks, Gunnar, Islam, M. Mainul, Rahman, M. Moklesur, von Bromssen, Mattias, Hasan, M. Aziz and Ahmed, Kazi Matin. 2014. "Sediment color tool for targeting arsenic-safe aquifers for the installation of shallow drinking water tubewells." Science of the Total Environment. 493, pp. 615-625. https://doi.org/10.1016/j.scitotenv.2014.05.064
Thermal expansion properties of fused borosilicate syntactic foams
Salleh, Zulzamri, Islam, Md Mainul and Epaarachchi, Jayantha Ananda. 2018. "Thermal expansion properties of fused borosilicate syntactic foams." Nano Hybrids and Composites. 23, pp. 39-45. https://doi.org/10.4028/www.scientific.net/NHC.23.39
Flammability characteristics of chemical treated woven hemp fabric reinforced vinyl ester composites
Misnon, M. I., Islam, M. M., Epaarachchi, J. A., Chen, H., Goda, K. and Khan, M. T. I.. 2018. "Flammability characteristics of chemical treated woven hemp fabric reinforced vinyl ester composites." Science and Technology of Materials. 30 (3), pp. 174-188. https://doi.org/10.1016/j.stmat.2018.06.001
Investigation of FBG sensor performance in detection of delamination damage in a half-conical shape composite component
Kakei, Ayad, Manuela, Jerry, Srinivasan, Vishwas, Sharda, Arvind, Islam, Mainul and Epaarachchi, Jayantha. 2019. "Investigation of FBG sensor performance in detection of delamination damage in a half-conical shape composite component ." 12th International Workshop on Structural Health Monitoring (IWSHM). United States 10 - 12 Sep 2019 United States. https://doi.org/10.12783/shm2019/32451
Structural performance and photothermal recovery of carbon fibre reinforced shape memory polymer
Herath, H. M .C. M., Epaarachchi, J. A., Islam, M. M., Al-Azzawi, W., Leng, J. and Zhang, F.. 2018. "Structural performance and photothermal recovery of carbon fibre reinforced shape memory polymer." Composites Science and Technology. 167, pp. 206-214. https://doi.org/10.1016/j.compscitech.2018.07.042
Thermo-mechanical behaviour and shape memory characteristics of carbon fibre reinforced epoxy
Herath, Madhubhashitha, Al-Azzawi, Wessam, Epaarachchi, Jayantha, Islam, Mainul, Robertson, Scott, Leng, Jinsong and Zhang, F.. 2018. "Thermo-mechanical behaviour and shape memory characteristics of carbon fibre reinforced epoxy." 2018 International Conference on Nanoscience and Nanotechnology (ICONN 2018). Wollongong, Australia 29 Jan - 02 Feb 2018
Fracture behaviour of bamboo fiber reinforced epoxy composites
Khan, Ziaullah, Yousif, B. F. and Islam, Mainul. 2017. "Fracture behaviour of bamboo fiber reinforced epoxy composites." Composites Part B: Engineering. 116, pp. 186-199. https://doi.org/10.1016/j.compositesb.2017.02.015
Flammability characteristics of chemical treated woven hemp fabric
Misnon, Mohd Iqbal, Islam, Md Mainul, Epaarachchi, Jayantha Ananda, Chen, Haizhen, Goda, Koichi and Khan, Md Tawhidul Islam. 2018. "Flammability characteristics of chemical treated woven hemp fabric." Advances in Materials Science and Engineering. 5 (1), pp. 1-20. https://doi.org/10.5121/msej.2018.5101
Effects of water absorption on mechanical properties of glass microballoons/vinyl ester syntactic foams
Salleh, Zulzamri, Islam, Md Mainul, Epaarachchi, Jayantha Ananda and Khan, Md Tawhidul Islam. 2018. "Effects of water absorption on mechanical properties of glass microballoons/vinyl ester syntactic foams." Research and Reviews in Materials Science and Chemistry. 8 (1), pp. 59-119.
Evaluation of delamination crack tip in woven fibre glass reinforced polymer composite using FBG sensor spectra and thermo-elastic response
Kakei, Ayad, Epaarachchi, J. A., Islam, Mainul and Leng, J.. 2018. "Evaluation of delamination crack tip in woven fibre glass reinforced polymer composite using FBG sensor spectra and thermo-elastic response." Measurement. 122, pp. 178-185. https://doi.org/10.1016/j.measurement.2018.03.023
Implementation of a finite element analysis procedure for structural analysis of shape memory behaviour of fibre reinforced shape memory polymer composites
Al Azzawi, Wessam, Epaarachchi, J. A., Islam, Mainul and Leng, Jinsong. 2017. "Implementation of a finite element analysis procedure for structural analysis of shape memory behaviour of fibre reinforced shape memory polymer composites." Smart Materials and Structures. 26 (12), pp. 1-13. https://doi.org/10.1088/1361-665X/aa928e
Quantitative and qualitative analyses of mechanical behavior and dimensional stability of styrene-based shape memory composites
Al Azzawi, Wessam, Islam, Mainul M., Leng, Jinsong, Li, Fengfeng and Epaarachchi, Jayantha A.. 2017. "Quantitative and qualitative analyses of mechanical behavior and dimensional stability of styrene-based shape memory composites." Journal of Intelligent Material Systems and Structures. 28 (20), pp. 3115-3126. https://doi.org/10.1177/1045389X17705210
Preliminary study on the development of syntactic foams for marine applications
Salleh, Z., Islam, M. M. and Ku, H.. 2013. "Preliminary study on the development of syntactic foams for marine applications." Epaarachchi, Jayantha A., Lau, Alan Kin-tak and Leng, Jinsong (ed.) 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013). Gold Coast, Australia 10 - 12 Jul 2013 United States. https://doi.org/10.1117/12.2028279
Water exposure, tensile and fatigue properties of treated hemp reinforced vinyl ester composites
Misnon, Mohd Iqbal, Islam, Mainul, Epaarachchi, Jayantha, Affandi, Nor Dalila Nor and Wang, Hao. 2018. "Water exposure, tensile and fatigue properties of treated hemp reinforced vinyl ester composites ." National Symposium on Polymeric Materials 2017 (NSPM 2017). Selangor, Malaysia 21 - 22 Oct 2017 United States . AIP Publishing. https://doi.org/10.1063/1.5047164
Use of an elasto-plastic model and strain measurements of embedded fibre Bragg grating sensors to detect Mode I delamination crack propagation in woven cloth (0/90) composite materials
Kakei, Ayad Arab, Islam, Mainul, Leng, Jingsong and Epaarachchi, Jayantha A.. 2018. "Use of an elasto-plastic model and strain measurements of embedded fibre Bragg grating sensors to detect Mode I delamination crack propagation in woven cloth (0/90) composite materials." Structural Health Monitoring: an international journal. 17 (2), pp. 363-378. https://doi.org/10.1177/1475921717694812
Determination of coefficient thermal expansion of glass microballoon/vinyl ester syntactic foams
Salleh, Zulzamri, Islam, Md Mainul and Epaarachchi, Jayantha Ananda. 2016. "Determination of coefficient thermal expansion of glass microballoon/vinyl ester syntactic foams." 3rd Advanced Materials Conference (AMC 2016): Advanced Materials for Sustainability and Growth. Langkawi, Malaysia 28 - 29 Nov 2016 Malaysia. AIP Publishing. https://doi.org/10.1063/1.5010477
Thermogravimetry analysis on fused borosilicate syntactic foams
Salleh, Zulzamri, Islam, Md Mainul and Epaarachchi, Jayantha Ananda. 2017. "Thermogravimetry analysis on fused borosilicate syntactic foams." 3rd Advanced Materials Conference (AMC 2016): Advanced Materials for Sustainability and Growth. Langkawi, Malaysia 28 - 29 Nov 2016 Kulim, Kedah, Malaysia. AIP Publishing. https://doi.org/10.1063/1.5010542
Analysis of stress concentration factor for tensile characteristics of syntactic foam using finite element method
Salleh, Zulzamri, Islam, Md Mainul and Epaarachchi, Jayantha Ananda. 2017. "Analysis of stress concentration factor for tensile characteristics of syntactic foam using finite element method." Journal of Research Updates in Polymer Science. 6 (1), pp. 21-32. https://doi.org/10.6000/1929-5995.2017.06.01.4
Vinyl ester/glass microballoon syntactic foams with low density
Salleh, Zulzamri, Islam, Md Mainul, Epaarachchi, Jayantha Ananda and Su, Haibin. 2017. "Vinyl ester/glass microballoon syntactic foams with low density." International Research Journal of Materials Sciences and Applications. 2017 (1), pp. 1-25.
Mechanical properties of activated carbon (AC) coconut shell reinforced polypropylene composites encapsulated with epoxy resin
Salleh, Z., Islam, M. M., Yusop, M. Y. M. and Idrus, M. A. Munaim M.. 2014. "Mechanical properties of activated carbon (AC) coconut shell reinforced polypropylene composites encapsulated with epoxy resin." Xuan, Li (ed.) 5th International Conference on Chemical, Biological and Environmental Engineering (ICBEE 2013). New Delhi, India 14 - 15 Sep 2013 United States. https://doi.org/10.1016/j.apcbee.2014.01.017
Tensile behaviours of activated carbon (AC) coconut shell reinforced recycle polyethylene (PET) hybrid composites
Salleh, Zulzamri, Islam, Md Mainul, Yusop, M. Y. M. and Muhamad, M. S.. 2013. "Tensile behaviours of activated carbon (AC) coconut shell reinforced recycle polyethylene (PET) hybrid composites." 12th International Conference on Frontiers of Polymers and Advanced Materials (ICFPAM 2013). Auckland, New Zealand 08 - 13 Dec 2013
Cure shrinkage in epoxy grouts for grouted repairs
Shamsuddoha, Md, Islam, Md Mainul, Aravinthan, Thiru, Manalo, Allan and Lau, Kin-tak. 2013. "Cure shrinkage in epoxy grouts for grouted repairs." Epaarachchi, Jayantha A., Lau, Alan Kin-tak and Leng, Jinsong (ed.) 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013). Gold Coast, Australia 10 - 12 Jul 2013 United States. https://doi.org/10.1117/12.2028085
Selection of hemp fabric as reinforcement in composite materials
Misnon, Mohd Iqbal, Islam, Md Mainul, Epaarachchi, Jayantha Ananda and Lau, Kin-tak. 2014. "Selection of hemp fabric as reinforcement in composite materials." Mashud, Mohammad (ed.) 3rd International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE 2014). Khulna, Bangladesh 26 - 27 Dec 2014 Khulna, Bangladesh.
Compressive properties of ceramic microballoon syntactic foams
Salleh, Zulzamri, Islam, Md Mainul and Epaarachchi, Jayantha Ananda. 2014. "Compressive properties of ceramic microballoon syntactic foams." Mashud, Mohammad (ed.) 3rd International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE 2014). Khulna, Bangladesh 26 - 27 Dec 2014 Khulna, Bangladesh.
Compressive, tensile and thermal properties of epoxy grouts subjected to underwater conditioning at elevated temperature
Shamsuddoha, M., Islam, M. M., Aravinthan, T., Manalo, A. and Djukic, L. P.. 2014. "Compressive, tensile and thermal properties of epoxy grouts subjected to underwater conditioning at elevated temperature." Smith, Scott T. (ed.) 23rd Australasian Conference on the Mechanics of Structures and Materials (ACMSM23). Byron Bay, Australia 09 - 12 Dec 2014 Lismore, Australia.
Development of fracture and damage modeling concepts for composite materials
Kakei, Ayad Arab Ghaidan, Epaarachchi, Jayantha Ananda, Islam, M. Mainul and Leng, Jinsong. 2016. "Development of fracture and damage modeling concepts for composite materials." Epaarachchi, Jayantha Ananda and Kahandawa, Gayan Chanaka (ed.) Structural health monitoring technologies and next-generation smart composite structures. Roca Raton, USA. CRC Press. pp. 341-368
Integration of textile fabric and coconut shell in particleboard
Misnon, M. I., Bahari, S. A., Islam, M. M. and Epaarachchi, J. A.. 2013. "Integration of textile fabric and coconut shell in particleboard ." Epaarachchi, Jayantha A., Lau, Alan Kin-tak and Leng, Jinsong (ed.) 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013). Gold Coast, Australia 10 - 12 Jul 2013 United States. https://doi.org/10.1117/12.2027836
Effect of hygrothermal conditioning on the mechanical and thermal properties of epoxy grouts for offshore pipeline rehabilitation
Shamsuddoha, Md, Islam, Md Mainul, Aravinthan, Thiru, Manalo, Allan and Djukic, Luke P.. 2016. "Effect of hygrothermal conditioning on the mechanical and thermal properties of epoxy grouts for offshore pipeline rehabilitation." AIMS Material Science. 3 (3), pp. 832-850. https://doi.org/10.3934/matersci.2016.3.832
Mechanical properties of sandwich composite made of syntactic foam core and GFRP skins
Salleh, Zulzamri, Islam, Md Mainul, Epaarachchi, Jayantha Ananda and Su, Haibin. 2016. "Mechanical properties of sandwich composite made of syntactic foam core and GFRP skins." AIMS Material Science. 3 (4), pp. 1704-1727. https://doi.org/10.3934/matersci.2016.4.1704
Analysis of stress concentration factor around the hole of syntactic foam tensile specimens
Salleh, Z., Islam, M. M. and Epaarachchi, J. A.. 2016. "Analysis of stress concentration factor around the hole of syntactic foam tensile specimens." International Journal of Advances in Science, Engineering and Technology (IJASEAT). 4 (3), pp. 102-106.
Woven hemp fabric reinforced vinyl ester composite: effect of water absorption on the mechanical properties degradation
Misnon, Mohd Iqbal, Islam, Md Mainul, Epaarachchi, Jayantha Ananda, Wang, Hao and Lau, Kin-tak. 2016. "Woven hemp fabric reinforced vinyl ester composite: effect of water absorption on the mechanical properties degradation." International Journal of Advances in Science, Engineering and Technology (IJASEAT). 4 (3), pp. 96-101.
Woven hemp fabric reinforced vinyl ester composite treated with fire retardant
Misnon, Mohd Iqbal, Islam, Md Mainul, Epaarachchi, Jayantha Ananda, Chen, Haizhen and Wang, Hao. 2016. "Woven hemp fabric reinforced vinyl ester composite treated with fire retardant." International Journal of Advances in Science, Engineering and Technology (IJASEAT). 4 (3), pp. 90-95.
Shape memory polymers and their applications
Al Azzawi, W. S., Epaarachchi, Jayantha Ananda, Islam, M. Mainul and Leng, Jinsong. 2016. "Shape memory polymers and their applications." Epaarachchi, Jayantha Ananda and Kahandawa, Gayan Chanaka (ed.) Structural health monitoring technologies and next-generation smart composite structures. Boca Raton, Florida. CRC Press. pp. 447-478
Detection and characterisation of delamination damage propagation in woven glass fibre reinforced polymer composite using thermoelastic response mapping
Kakei, Ayad, Epaarachchi, J. A., Islam, Mainul, Leng, J. and Rajic, N.. 2016. "Detection and characterisation of delamination damage propagation in woven glass fibre reinforced polymer composite using thermoelastic response mapping." Composite Structures. 153, pp. 442-450. https://doi.org/10.1016/j.compstruct.2016.06.044
Mechanical properties of low density glass microballoon/vinyl ester syntactic foam for marine application
Salleh, Zulzamri, Islam, Md Mainul and Epaarachchi, Jayantha Ananda. 2015. "Mechanical properties of low density glass microballoon/vinyl ester syntactic foam for marine application." 12th Composites Australia and CRC-ACS Conference 2015: Game On! Winning with Composites. Gold Coast, Australia 21 - 23 Apr 2015
Compressive behaviour of low density polymeric syntactic foams
Salleh, Zulzamri, Islam, Md Mainul and Epaarachchi, Jayantha Ananda. 2015. "Compressive behaviour of low density polymeric syntactic foams." Applied Mechanics and Materials. 799-800, pp. 135-139. https://doi.org/10.4028/www.scientific.net/AMM.799-800.135
Analyses of woven hemp fabric characteristics for composite reinforcement
Misnon, M. I., Islam, M. M., Epaarachchi, J. A. and Lau, K. T.. 2015. "Analyses of woven hemp fabric characteristics for composite reinforcement." Materials and Design. 66 (A), pp. 82-92. https://doi.org/10.1016/j.matdes.2014.10.037
Characterisation of the mechanical properties of pultruded fibre-reinforced polymer tube
Guades, Ernesto, Aravinthan, Thiru and Islam, Md Mainul. 2014. "Characterisation of the mechanical properties of pultruded fibre-reinforced polymer tube." Materials and Design. 63, pp. 305-315. https://doi.org/10.1016/j.matdes.2014.06.018
Potentiality of utilising natural textile materials for engineering composites applications
Misnon, Mohd Iqbal, Islam, Md Mainul, Epaarachchi, Jayantha Ananda and Lau, Kin-tak. 2014. "Potentiality of utilising natural textile materials for engineering composites applications." Materials and Design. 59, pp. 359-368. https://doi.org/10.1016/j.matdes.2014.03.022
Mechanical and thermal properties of jute fibre reinforced composites
Kabir, Mohammad Mazedul, Islam, Md Mainul and Wang, Hao. 2013. "Mechanical and thermal properties of jute fibre reinforced composites." Journal of Multifunctional Composites. 1 (1), pp. 71-77. https://doi.org/10.12783/issn.2168-4286/1.1/Islam
Effectiveness of using fibre-reinforced polymer composites for underwater steel pipeline repairs
Shamsuddoha, Md, Islam, Md Mainul, Aravinthan, Thiru, Manalo, Allan and Lau, Kin-tak. 2013. "Effectiveness of using fibre-reinforced polymer composites for underwater steel pipeline repairs." Composite Structures. 100, pp. 40-54. https://doi.org/10.1016/j.compstruct.2012.12.019
Smart structure for small wind turbine blade
Supeni, E. E., Epaarachchi, J. A., Islam, M. M. and Lau, K. T.. 2013. "Smart structure for small wind turbine blade." Epaarachchi, Jayantha A., Lau, Alan Kin-tak and Leng, Jinsong (ed.) 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013). Gold Coast, Australia 10 - 12 Jul 2013 United States. https://doi.org/10.1117/12.2027725
Mechanical properties of epoxy grouts for structural repair
Shamsuddoha, M., Islam, M. M., Aravinthan, T., Manalo, A. C. and Lau, K. T.. 2013. "Mechanical properties of epoxy grouts for structural repair." Samali, Bijan, Attard, Mario M. and Song, Chongmin (ed.) 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM22). Sydney, Australia 11 - 14 Dec 2012 London, United Kingdom.
Effect of coarse filler on shrinkages and dynamic mechanical properties of epoxy grouts
Shamsuddoha, Md, Islam, Md Mainul, Aravinthan, Thiru, Manalo, Allan and Lau, Kin-Tak. 2014. "Effect of coarse filler on shrinkages and dynamic mechanical properties of epoxy grouts." Journal of Multifunctional Composites. 2 (1), pp. 61-66. https://doi.org/10.12783/issn.2168-4286/2.1/
Sustainable composites
Yousif, Belal F., Islam, Md Mainul and Salit, Mohd Sapuan. 2013. "Sustainable composites." Advances in Materials Science and Engineering. https://doi.org/10.1155/2013/142718
Characterisation of mechanical and thermal properties of epoxy grouts for composite repair of steel pipelines
Shamsuddoha, Md, Islam, Md Mainul, Aravinthan, Thiru, Manalo, Allan and Lau, Kin-tak. 2013. "Characterisation of mechanical and thermal properties of epoxy grouts for composite repair of steel pipelines." Materials and Design. 52, pp. 315-327. https://doi.org/10.1016/j.matdes.2013.05.068
Study on compressive properties of syntactic foams for marine applications
Salleh, Z., Islam, M. M. and Ku, H.. 2014. "Study on compressive properties of syntactic foams for marine applications." Journal of Multifunctional Composites. 2 (1), pp. 21-27. https://doi.org/10.12783/issn.2168-4286/2.1/Salleh
Development of artificial neural network model in predicting performance of the smart wind turbine blade
Supeni, E. E., Epaarachchi, J. A., Islam, M. M. and Lau, K. T.. 2013. "Development of artificial neural network model in predicting performance of the smart wind turbine blade." 3rd Malaysian Postgraduate Conference (MPC 2013). Sydney, Australia 04 - 05 Jul 2013 Sydney, Australia.
Textile material forms for reinforcement materials: a review
Misnon, M. I., Islam, M. M., Epaarachchi, J. and Lau, K. T.. 2013. "Textile material forms for reinforcement materials: a review." 3rd Malaysian Postgraduate Conference (MPC 2013). Sydney, Australia 04 - 05 Jul 2013 Sydney, Australia.
Tensile behaviours of activated carbon coconut shell filled epoxy composites
Salleh, Z., Islam, M. M. and Ku, H.. 2013. "Tensile behaviours of activated carbon coconut shell filled epoxy composites." Noor, M. M., Rahman, M. M. and Ismail, J. (ed.) 3rd Malaysian Postgraduate Conference (MPC 2013). Sydney, Australia 04 - 05 Jul 2013 Sydney, Australia.
Damage modelling of repeatedly impacted square fibre reinforced polymer composite tube
Guades, Ernesto, Aravinthan, Thiru, Manalo, Allan and Islam, Mainul. 2013. "Damage modelling of repeatedly impacted square fibre reinforced polymer composite tube." Materials and Design. 47, pp. 687-697. https://doi.org/10.1016/j.matdes.2012.12.051
Fibre composites for high pressure pipeline repairs, in-air and subsea: an overview
Shamsuddoha, Md, Islam, Md Mainul, Aravinthan, Thiru, Manalo, Allan, Lau, Kin-tak and Elder, David. 2012. "Fibre composites for high pressure pipeline repairs, in-air and subsea: an overview." Ueda, Tamon (ed.) 3rd Asia-Pacific Conference on FRP in Structures (APFIS 2012). Sapporo, Japan 02 - 04 Feb 2012 Hokkaido, Japan.
Behaviour of pultruded FRP hollow sections under eccentric loading
Islam, Md Mainul, Aravinthan, Thiru and Williams, Paul Garreth. 2012. "Behaviour of pultruded FRP hollow sections under eccentric loading." Monti, Georgio (ed.) 6th International Conference on FRP Composites in Civil Engineering (CICE 2012). Rome, Italy 13 - 15 Jun 2012 Rome, Italy.
Silk fibers and their unidirectional polymer composites
Ahmed, Mansur, Islam, Md Saiful, Ahsan, Qumrul and Islam, Md Mainul. 2012. "Silk fibers and their unidirectional polymer composites." Thomas, Sabu, Ninan, Neethu, Mohan, Mohan and Francis, Elizabeth (ed.) Natural polymers, biopolymers, biomaterials, and their composites, blends, and IPNs. Oakville, ON. Canada . Apple Academic Press (CRC Press). pp. 79-90
A pilot study on flexural properties of epoxy nanoclay reinforced composites
Ku, H., Fung, S. Y., Islam, M., Li, X. and Chong, Y. P.. 2013. "A pilot study on flexural properties of epoxy nanoclay reinforced composites ." Journal of Reinforced Plastics and Composites. 32 (2), pp. 96-104. https://doi.org/10.1177/0731684412459246
Development of smart wind turbine blades
Supeni, E. E., Epaarachchi, J. A., Islam, M. M. and Lau, K. T.. 2012. "Development of smart wind turbine blades." Jaafar, M., Azura, A. R., Leong, K. H and Leong, A. Y. L (ed.) 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today. Kuala Lumpur, Malaysia 06 - 08 Nov 2012 Kowloon, Hong Kong.
Stiffness of FRP pultruded tubes under repeated axial impacts
Guades, Ernesto J., Aravinthan, Thiru, Islam, Md. Mainul and Manalo, Allan C.. 2012. "Stiffness of FRP pultruded tubes under repeated axial impacts." Ueda, Tamon (ed.) 3rd Asia-Pacific Conference on FRP in Structures (APFIS 2012). Sapporo, Japan 02 - 04 Feb 2012 Hokkaido, Japan.
Effects of energy level and impact repetitions on the impact fatigue behaviour and post-impact flexural properties of square FRP pultruded tubes
Guades, E. J., Aravinthan, T., Manalo, A. C. and Islam, M. M.. 2013. "Effects of energy level and impact repetitions on the impact fatigue behaviour and post-impact flexural properties of square FRP pultruded tubes." Samali, Bijan, Attard, Mario M. and Song, Chongmin (ed.) 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM22). Sydney, Australia 11 - 14 Dec 2012 London, United Kingdom.
Sandwich composites made of syntactic foam core and paper skin: manufacturing and mechanical behavior
Islam, Md Mainul and Kim, Ho Sung. 2012. "Sandwich composites made of syntactic foam core and paper skin: manufacturing and mechanical behavior." Journal of Sandwich Structures and Materials. 14 (1), pp. 111-127. https://doi.org/10.1177/1099636211413564
Design of smart structures for wind turbine blades
Supeni, E. E., Epaarachchi, J. A., Islam, M. M. and Lau, K. T.. 2012. "Design of smart structures for wind turbine blades." Noor, M. M., Rahman, M. M. and Ismail, J. (ed.) 2nd Malaysian Postgraduate Conference (MPC 2012). Gold Coast, Australia 07 - 09 Jul 2012 Sydney, Australia.
Experimental investigation on the behaviour of square FRP composite tubes under repeated axial impact
Guades, Ernesto, Aravinthan, Thiru, Manalo, Allan and Islam, Mainul. 2013. "Experimental investigation on the behaviour of square FRP composite tubes under repeated axial impact." Composite Structures. 97, pp. 211-221. https://doi.org/10.1016/j.compstruct.2012.10.033
A review on the driving performance of FRP composite piles
Guades, Ernesto, Aravinthan, Thiru, Islam, Mainul and Manalo, Allan. 2012. "A review on the driving performance of FRP composite piles." Composite Structures. 94 (6), pp. 1932-1942. https://doi.org/10.1016/j.compstruct.2012.02.004
Compressive strength characterization of polyester based fillers
Sirimanna, Chamila Sampath, Lokuge, Weena, Islam, Md Mainul and Aravinthan, Thiru. 2012. "Compressive strength characterization of polyester based fillers." Advanced Materials Research. https://doi.org/10.4028/www.scientific.net/AMR.410.32
Driveability of composite piles
Guades, E. J., Aravinthan, T. and Islam, M. M.. 2011. "Driveability of composite piles." Cowled, Craig J. L. (ed.) 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing (eddBE 2011). Brisbane, Australia 27 - 29 Apr 2011 Brisbane, Australia.
Behaviour of fibre composite pile under axial compression load
Guades, E. J., Sirimanna, C. S., Aravinthan, T. and Islam, M. M.. 2011. "Behaviour of fibre composite pile under axial compression load." Venkatesan, Srikanth, Lam, Nelson T. K. and Setunge, Sujeeva (ed.) 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM 21). Melbourne, Australia 07 - 10 Dec 2010 Leiden, Netherlands. https://doi.org/10.1201/b10571-81
Preliminary development of polymer based filler materials for GFRP tubular connector
Sirimanna, C. S., Islam, M. M. and Aravinthan, T.. 2011. "Preliminary development of polymer based filler materials for GFRP tubular connector." Fragomeni, Sam, Venkatesan, Srikanth, Lam, Nelson T. K. and Setunge, Sujeeva (ed.) 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM 21). Melbourne, Australia 07 - 10 Dec 2010 Leiden, Netherlands. https://doi.org/10.1201/b10571-79
Behaviour of fibre composite sandwich panels under uniformly distributed loading
Islam, M. M. and Aravinthan, T.. 2011. "Behaviour of fibre composite sandwich panels under uniformly distributed loading." Fragomeni, Sam, Venkatesan, Srikanth, Lam, Nelson T. K. and Setunge, Sujeeva (ed.) 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM 21). Melbourne, Australia 07 - 10 Dec 2010 Leiden, Netherlands. https://doi.org/10.1201/b10571-77
Influence of fly ash proportions on properties of polymer concrete with polyester resin
Lokuge, Weena, Aravinthan, Thiru, Sirimanna, Chamila Sampath and Islam, Mainul. 2011. "Influence of fly ash proportions on properties of polymer concrete with polyester resin." 25th Biennial Conference of the Concrete Institute of Australia (Concrete 2011): Building a Sustainable Future. Perth, Australia 12 - 14 Oct 2011 Sydney, Australia.
An investigation on the student performance in first year fundamental engineering course engineering statistics
Islam, Md Mainul and Epaarachchi, Jayantha Ananda. 2012. "An investigation on the student performance in first year fundamental engineering course engineering statistics." Mortimer, Rachel (ed.) 15th International First Year in Higher Education Conference (FYHE 2012) . Brisbane, Australia 26 - 29 Jun 2012 Brisbane, Australia.
Syntactic foams consolidated with starch: mixing behaviour for post-mould processing
Islam, Md Mainul and Kim, Ho Sung. 2006. "Syntactic foams consolidated with starch: mixing behaviour for post-mould processing." 4th International Conference on Advanced Materials & Processing (ICAMP-4). Hamilton, New Zealand 10 - 13 Dec 2006 Hamilton, New Zealand.
Syntactic foams consolidated with starch: modelling for pre-mould processing
Islam, Md Mainul and Kim, Ho Sung. 2006. "Syntactic foams consolidated with starch: modelling for pre-mould processing." 4th International Conference on Advanced Materials & Processing (ICAMP-4). Hamilton, New Zealand 10 - 13 Dec 2006 Hamilton, New Zealand.
Novel syntactic foams made of ceramic hollow micro-spheres and starch - theory, structure and properties
Islam, Md Mainul and Kim, Ho Sung. 2006. "Novel syntactic foams made of ceramic hollow micro-spheres and starch - theory, structure and properties." Bandyopadhyay, Sri, Zeng, Q., Berndt, Christopher C., Rizkalla, S., Gowripalan, N. and Matison, Janison (ed.) ACUN-5 International Composites Conference. Sydney, Australia 11 - 14 Jul 2006 Sydney, Australia.
Syntactic foams consolidated with starch: mixing behaviour for post-mould processing
Islam, Md Mainul and Kim, Ho Sung. 2007. "Syntactic foams consolidated with starch: mixing behaviour for post-mould processing." Advanced Materials Research. 29-30, pp. 169-172.
Syntactic foams consolidated with starch: modelling for pre-mould processing
Islam, Md Mainul and Kim, Ho Sung. 2007. "Syntactic foams consolidated with starch: modelling for pre-mould processing." Advanced Materials Research. 29-30, pp. 165-168.
Novel syntactic foams made of ceramic hollow micro-spheres and starch: theory, structure and properties
Islam, Md Mainul and Kim, Ho Sung. 2007. "Novel syntactic foams made of ceramic hollow micro-spheres and starch: theory, structure and properties." Journal of Materials Science. 42 (15), pp. 6123-6132. https://doi.org/10.1007/s10853-006-1091-7
Manufacture of syntactic foams: pre-mold processing
Islam, Md Mainul and Kim, Ho Sung. 2007. "Manufacture of syntactic foams: pre-mold processing." Materials and Manufacturing Processes. 22 (1), pp. 28-36. https://doi.org/10.1080/10426910601015857
Pre-mould processing for syntactic foams: modelling, theory and experiment
Islam, Md Mainul and Kim, Ho Sung. 2008. "Pre-mould processing for syntactic foams: modelling, theory and experiment." 13th International Conference on Applied Mechanics and Mechanical Engineering (AMME-13). Cairo, Egypt 27 - 29 May 2008 Cairo, Egypt.
Temperature effects on full scale FRP bridge using innovative composite components
Sirimanna, C. S., Islam, M. M. and Aravinthan, T.. 2011. "Temperature effects on full scale FRP bridge using innovative composite components." Ye, Lieping, Feng, Peng and Yue, Qingrui (ed.) 5th International Conference on FRP Composites in Civil Engineering (CICE 2010). Beijing, China 27 - 29 Sep 2010 Beijing, China.
Behaviour of structural fibre composite sandwich panels under point load and uniformly distributed load
Islam, Md Mainul and Aravinthan, Thiru. 2010. "Behaviour of structural fibre composite sandwich panels under point load and uniformly distributed load." Composite Structures. 93 (1), pp. 206-215. https://doi.org/10.1016/j.compstruct.2010.05.019
Polymer based filler materials as infill for GFRP pile connector
Sirimanna, Chamila Sampath, Islam, Md Mainul and Aravinthan, Thiru. 2011. "Polymer based filler materials as infill for GFRP pile connector." Key Engineering Materials. 471-472, pp. 763-768. https://doi.org/10.4028/www.scientific.net/KEM.471-472.763
Fabrication and characterization of unidirectional silk fibre composites
Ahmed, Mansur, Islam, Md Saiful, Ahsan, Qumrul and Islam, Md Mainul. 2011. "Fabrication and characterization of unidirectional silk fibre composites." Key Engineering Materials. 471-472 (1), pp. 20-25. https://doi.org/10.4028/www.scientific.net/KEM.471-472.20
Flexural behaviour of structural fibre composite sandwich beams in flatwise and edgewise positions
Manalo, A. C., Aravinthan, T., Karunasena, W. and Islam, M. M.. 2010. "Flexural behaviour of structural fibre composite sandwich beams in flatwise and edgewise positions." Composite Structures. 92 (4), pp. 984-995. https://doi.org/10.1016/j.compstruct.2009.09.046
Pre-mould processing technique for syntactic foams: generalised modelling, theory and experiment
Islam, Md Mainul and Kim, Ho Sung. 2011. "Pre-mould processing technique for syntactic foams: generalised modelling, theory and experiment." Journal of Materials Processing Technology. 211 (4), pp. 708-716. https://doi.org/10.1016/j.jmatprotec.2010.12.006
Mechanical and thermal properties of untreated and chemically treated jute fibre reinforced composites
Kabir, Mohammad Mazedul, Islam, Md Mainul and Wang, Hao. 2010. "Mechanical and thermal properties of untreated and chemically treated jute fibre reinforced composites." 1st International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE 2010) . Khulna, Bangladesh 23 - 24 Dec 2010 Khulna, Bangladesh.
An overview on syntactic foam core and paper skin sandwich composites as potential building materials
Islam, Md Mainul, Kim, Ho Sung and Kabir, Mohammad Mazedul. 2010. "An overview on syntactic foam core and paper skin sandwich composites as potential building materials." 2010 International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE2010). Khulna, Bangladesh 23 - 24 Dec 2010 Khulna, Bangladesh.
Effects of temperature on a pultruded FRP composite
Sirimanna, Chamila S., Islam, Md Mainul and Aravinthan, Thiru. 2010. "Effects of temperature on a pultruded FRP composite." Teh, Kian, Davies, Ian and Howard, Ian (ed.) 6th Australasian Congress on Applied Mechanics (ACAM 6). Perth, Western Australia 12 - 15 Dec 2010 Perth, Australia.
An overview on the application of FRP composites in piling system
Guades, E. J., Aravinthan, T. and Islam, M. M.. 2010. "An overview on the application of FRP composites in piling system." Goh, Steven C. and Wang, Hao (ed.) 2010 Southern Region Engineering Conference (SREC 2010). Toowoomba, Australia 11 - 12 Nov 2010 Canberra, Australia.
Physical and tensile properties of raw and treated silk fibres
Ahmed, Mansur, Islam, Md Saiful, Ahsan, Qumrul and Islam, Md Mainul. 2010. "Physical and tensile properties of raw and treated silk fibres." 2nd International Conference on Natural Polymers, Bio-Polymers, Bio-Materials, their Composites, Blends, IPN's and Gels Polyelectrolytes and Gels: Macro to Nano Scales (ICNP - 2010). Kottayam, India 24 - 26 Sep 2010 India.
Manufacturing and behaviour of sandwich composites made of starch as binder for core and adhesive between core and skins
Islam, Md Mainul and Kim, Ho Sung. 2010. "Manufacturing and behaviour of sandwich composites made of starch as binder for core and adhesive between core and skins." 2nd International Conference on Natural Polymers, Bio-Polymers, Bio-Materials, their Composites, Blends, IPN's and Gels Polyelectrolytes and Gels: Macro to Nano Scales (ICNP - 2010). Kottayam, India 24 - 26 Sep 2010 India.
Investigation for a suitable screw of a briquetting machine
Ali, Md Nawsher, Islam, Md Mainul and Ferdous, Chy. Md Refaul. 2004. "Investigation for a suitable screw of a briquetting machine." Hossain, M. Imtiaz (ed.) 2nd BSME-ASME lnternational Conference on Thermal Engineering. Dhaka, Bangladesh 02 - 04 Jan 2004 Dhaka, Bangladesh.
An overview of energy profile for Bangladesh: past, present and future uses
Khan, Kamrujjaman, Islam, Md Mainul, Rahman, M. L. and Ali, Md Nawsher. 2003. "An overview of energy profile for Bangladesh: past, present and future uses." 2003 National Seminar on the Role of Renewable and Alternative Energy Sources for National Development (SRRAESND-2003). Khulna, Bangladesh 19 - 20 Dec 2003 Pathumthani, Thailand.
An investigation on the raw materials and products of the briquetting machine
Islam, Md Mainul, Khan, Kamrujjaman, Ali, Md Nawsher and Islam, Md Shahidul. 2003. "An investigation on the raw materials and products of the briquetting machine." 2003 National Seminar on the Role of Renewable and Alternative Energy Sources for National Development (SRRAESND-2003). Khulna, Bangladesh 19 - 20 Dec 2003 Pathumthani, Thailand.
Syntactic foams as building materials consisting of inorganic hollow microspheres and starch binder
Kim, Ho Sung and Islam, Md Mainul. 2009. "Syntactic foams as building materials consisting of inorganic hollow microspheres and starch binder." Cornejo, Donald N. and Haro, Jason L. (ed.) Building materials: properties, performance and applications. New York, USA. Nova Science Publishers.
Behaviour of innovative fibre composite sandwich panels
Islam, Md Mainul. 2009. "Behaviour of innovative fibre composite sandwich panels." Workshop on Life Cycle Assessment of Sustainable FRP Materials (2009). Saitama, Japan 14 Dec 2009
Behaviour of innovative fibre composite sandwich panels under point loading
Islam, M. M., Aravinthan, T. and Van Erp, G.. 2009. "Behaviour of innovative fibre composite sandwich panels under point loading." Sim, Jongsung (ed.) 2nd Asia-Pacific Conference on FRP in Structures (APFIS 2009). Seoul, Korea 09 - 11 Dec 2009 Seoul, Korea.
Solar photovoltaic technology and Bangladesh
Ferdous, C. M. R., Islam, M. Shahidul, Islam, M. Mainul, Alam, M. M. Asraful and Rahman, A. N. M.Mizanur. 2003. "Solar photovoltaic technology and Bangladesh." 2003 National Seminar on the Role of Renewable and Alternative Energy Sources for National Development (SRRAESND-2003). Khulna, Bangladesh 19 - 20 Dec 2003 Pathumthani, Thailand.
Evaluation of the properties of raw materials and products of briquetting machine
Islam, Md Mainul, Ali, Md Nawsher and Mia, Sobahan. 2004. "Evaluation of the properties of raw materials and products of briquetting machine." Hossain, M. Imtiaz (ed.) 2nd BSME-ASME International Conference on Thermal Engineering. Dhaka, Bangladesh 02 - 04 Jan 2004 Dhaka, Bangladesh.
Crack opening behavior in aluminum alloy 5083
Islam, Md Mainul and Watanabe, Taiji. 2003. "Crack opening behavior in aluminum alloy 5083." Journal of Mechanical Engineering, Institution of Engineers, Bangladesh. ME 32, pp. 26-35.
Flexural behaviour of composite sandwiches for structural applications
Manalo, Allan, Aravinthan, Thiru, Karunasena, Warna and Islam, Mainul. 2009. "Flexural behaviour of composite sandwiches for structural applications." Oehlers, D. J., Griffith, M. C. and Seracino, R. (ed.) 9th International Symposium on Fibre Reinforced Polymers for Reinforced Concrete Structures (FRPRCS-9): Current Challenges and Future Trends. Sydney, Australia 13 - 15 Jul 2009 Adelaide, Australia.
Bid-Winning Potential Optimization for Concession Schemes with Imprecise Investment Parameters
Islam, Md. Mainul and Mohamed, Sherif. 2009. "Bid-Winning Potential Optimization for Concession Schemes with Imprecise Investment Parameters ." Journal of Construction Engineering and Management. 135 (8), pp. 690-700. https://doi.org/10.1061/(ASCE)CO.1943-7862.0000032
An overview on manufacturing and properties of syntactic foams made of ceramic hollow microspheres and starch
Islam, M. M. and Kim, H. S.. 2009. "An overview on manufacturing and properties of syntactic foams made of ceramic hollow microspheres and starch ." Aravinthan, Thiru, Karunasena, Warna and Wang, Hao (ed.) 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM20). Toowoomba, Australia 02 - 05 Dec 2008 London, United Kingdom.
Properties and mechanical behaviour of novel sandwich composites made of syntactic foam and paper skin
Islam, Md Mainul and Kim, Ho Sung. 2007. "Properties and mechanical behaviour of novel sandwich composites made of syntactic foam and paper skin." Veidt, Martin, Albermani, Faris, Daniel, Bill, Griffiths, John, Hargreaves, Doug, McAree, Ross, Meehan, Paul and Tan, Andy (ed.) 5th Australasian Congress on Applied Mechanics (ACAM 2007). Brisbane, Australia 10 - 12 Dec 2007 Sydney, Australia.