Mechanical and thermal properties of untreated and chemically treated jute fibre reinforced composites

Paper

Kabir, Mohammad Mazedul, Islam, Md Mainul and Wang, Hao. 2010. "Mechanical and thermal properties of untreated and chemically treated jute fibre reinforced composites." 1st International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE 2010) . Khulna, Bangladesh 23 - 24 Dec 2010 Khulna, Bangladesh.
Paper/Presentation Title

Mechanical and thermal properties of untreated and chemically treated jute fibre reinforced composites

Presentation TypePaper
AuthorsKabir, Mohammad Mazedul (Author), Islam, Md Mainul (Author) and Wang, Hao (Author)
Journal or Proceedings TitleProceedings of the 1st International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE 2010)
Number of Pages6
Year2010
Place of PublicationKhulna, Bangladesh
ISBN9789843323064
Web Address (URL) of Paperhttp://www.kuet.ac.bd/icmiee2010/
Conference/Event1st International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE 2010)
Event Details
1st International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE 2010)
Event Date
23 to end of 24 Dec 2010
Event Location
Khulna, Bangladesh
Abstract

Composite materials based on natural fibres, especially jute, have the potential to be used in engineering load bearing applications. The presence of hydrophilic hydroxyl groups in its structure results poor adhesion with the polymeric matrix. To improve fibre matrix adhesion, different concentration of alkali (NaOH) treatment on the fibres was carried out. Differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) were used to investigate the changes of fibres chemical constituents after treatment. Jute-polyester composites were prepared by hand lay-up method. Mechanical properties such as flexural and compressive strength, modulus and strain at break of untreated and treated fibre composites were studied and compared. Best results were observed on compressive and flexural properties respectively for 5% and 7% NaOH treated samples. Thermal stability was also enhanced for the treated fibres. In general, thermal and mechanical properties of the treated fibres and their composites were superior to the untreated fibres.

Keywordsnatural fibre; jute; alkali treatment; mechanical; thermal properties
ANZSRC Field of Research 2020401602. Composite and hybrid materials
340502. Natural products and bioactive compounds
401706. Numerical modelling and mechanical characterisation
Public Notes

File reproduced in accordance with the copyright policy of the publisher/author.

Byline AffiliationsFaculty of Engineering and Surveying
Centre of Excellence in Engineered Fibre Composites
Permalink -

https://research.usq.edu.au/item/q033w/mechanical-and-thermal-properties-of-untreated-and-chemically-treated-jute-fibre-reinforced-composites

Log in to edit
  • 2221
    total views
  • 63
    total downloads
  • 0
    views this month
  • 0
    downloads this month

Export as

Related outputs

Pore accessibility matters in CO2 electrolysis: preventing H2 formation and boosting triple-phase boundary on microtubular gas-diffusion electrodes
Ge, Lei, Chen, Guoliang, Ma, Beibei, Kuang, Yizhu, Rabiee, Hesamoddin, Dorosti, Fatereh, Nanjundan, Ashok Kumar, Zhu, Zhonghua and Wang, Hao. 2025. "Pore accessibility matters in CO2 electrolysis: preventing H2 formation and boosting triple-phase boundary on microtubular gas-diffusion electrodes." Applied Catalysis B: Environment and Energy. 363. https://doi.org/10.1016/j.apcatb.2024.124803
Revelling pore microstructure impacts on the compressive strength of porous proppant based on finite and discrete element method
Liao, Zijia, Rabiee, Hesamoddin, Ge, Lei, Li, Xiaogang, Yang, Zhaozhong, Xue, Qi, Shen, Chao and Wang, Hao. 2025. "Revelling pore microstructure impacts on the compressive strength of porous proppant based on finite and discrete element method." Journal of Materials Science and Technology. 211, pp. 72-81. https://doi.org/10.1016/j.jmst.2024.05.054
Strong self-healing close-loop recyclable vitrimers via complementary dynamic covalent/non-covalent bonding
Wang, Cheng, Huo, Siqi, Ye, Guofeng, Zhang, Qi, Cao, Cheng-Fei, Lynch, Mark, Wang, Hao, Song, Pingan and Liu, Zhitian. 2024. "Strong self-healing close-loop recyclable vitrimers via complementary dynamic covalent/non-covalent bonding." Chemical Engineering Journal. https://doi.org/10.1016/j.cej.2024.157418
Green synthesis of a P/N/B-containing aggregate for boosting fire-retardancy of PA6/aluminum diethylphosphinate composites
Lu, Yixia, Chu, Tao, Huo, Siqi, Huang, Guobo, Xu, Zhiguang, Feng, Jiabing, Xie, Hongyan, Jafari, Pooya, Wang, Hao and Song, Pingan. 2024. "Green synthesis of a P/N/B-containing aggregate for boosting fire-retardancy of PA6/aluminum diethylphosphinate composites." Polymer Degradation and Stability. 229. https://doi.org/10.1016/j.polymdegradstab.2024.110949
Development of Novel Elastomeric Composites Using Agricultural and Industrial Wastes
Islam, Md Mainul. 2024. "Development of Novel Elastomeric Composites Using Agricultural and Industrial Wastes." 8th Global Conference & Expo on Materials Science and Engineering. Dubai, UAE 18 - 19 Nov 2024 Dubai, UAE.
Fire‐Safe Aerogels and Foams for Thermal Insulation: From Materials to Properties
Song, Pingan, Feng, Jiabing, Ma, Zhewen, Wu, Jianpeng, Zhou, Zhezhe, Liu, Zheng, Hou, Boyou, Zheng, Wei, Huo, Siqi, Pan, Ye-Tang, Hong, Min, Gao, Qiang, Sun, Ziqi and Wang, Hao. 2024. "Fire‐Safe Aerogels and Foams for Thermal Insulation: From Materials to Properties." Advanced Materials. https://doi.org/10.1002/adma.202411856
Non‐selective Defect Minimization towards Highly Efficient Metal‐Organic Framework Membranes for Gas Separation
Dorosti, Fatereh, Ge, Lei, Wang, Hao, Bell, John, Lin, Rijia, Hou, Jingwei and Zhu, Zhonghua. 2024. "Non‐selective Defect Minimization towards Highly Efficient Metal‐Organic Framework Membranes for Gas Separation." Angewandte Chemie. https://doi.org/10.1002/ange.202417513
A Hyperbranched Phosphorus/Nitrogen/Silicon-Containing Polymer as a Multifunctional Additive for Epoxy Resins
Zhong, Qian, Huo, Siqi, Wang, Cheng, Ye, Guofeng, Zhang, Qi, Wang, Hao and Liu, Zhitian. 2024. "A Hyperbranched Phosphorus/Nitrogen/Silicon-Containing Polymer as a Multifunctional Additive for Epoxy Resins ." Macromolecular Rapid Communications. https://doi.org/10.1002/marc.202400801
Engineering Interfacial Molecular Interactions on Ag Hollow Fibre Gas Diffusion Electrodes for High Efficiency in CO2 Conversion to CO
Kuang, Yizhu, Chen, Guoliang, Herath Mudiyanselage, Dimuthu, Rabiee, Hesamoddin, Ma, Beibei, Dorosti, Fatereh, Nanjundan, Ashok Kumar, Zhu, Zhonghua, Wang, Hao and Ge, Lei. 2024. "Engineering Interfacial Molecular Interactions on Ag Hollow Fibre Gas Diffusion Electrodes for High Efficiency in CO2 Conversion to CO." Chemistry: A European Journal. https://doi.org/10.1002/chem.202403251
Liquid phosphorus-based bis-imidazole compounds as latent curing agents for enhancing thermal, mechanical, and flame-retardant performances of single-component epoxy resins
Wang, Jingsheng, Wang, Jun, Wang, Fengyi, Yang, Shuang, Wu, Chaoqun, Chen, Xi, Chen, Kaiwen, Song, Pingan, Wang, Hao and Huo, Siqi. 2024. "Liquid phosphorus-based bis-imidazole compounds as latent curing agents for enhancing thermal, mechanical, and flame-retardant performances of single-component epoxy resins." Polymer Degradation and Stability. 230. https://doi.org/10.1016/j.polymdegradstab.2024.111066
Phosphorus/boron-containing, flame-retardant polyurethane elastomers with great mechanical, shape-memory, and recycling performances
Zhang, Tiantian, Huo, Siqi, Ye, Guofeng, Wang, Cheng, Zhang, Qi ., Xue, Yijiao, Song, Pingan, Wang, Hao and Liu, Zhitian. 2024. "Phosphorus/boron-containing, flame-retardant polyurethane elastomers with great mechanical, shape-memory, and recycling performances." Polymer Degradation and Stability. https://doi.org/10.1016/j.polymdegradstab.2024.111047
Formulation of Epoxy Prepregs, Synthesization Parameters, and Resin Impregnation Approaches—A Comprehensive Review
Epaarachchi, Jayantha, Somarathna, Yashoda, Herath, Madhubhashitha and Islam, Md Mainul. 2024. "Formulation of Epoxy Prepregs, Synthesization Parameters, and Resin Impregnation Approaches—A Comprehensive Review ." Polymers. 16 (23). https://doi.org/10.3390/polym16233326
Optimising nanoparticle dispersion time for enhanced thermomechanical properties in DGEBA-based shape memory polymer composites
Jeewantha, Janitha, Epaarachchi, Jayantha and Islam, Md Mainul. 2024. "Optimising nanoparticle dispersion time for enhanced thermomechanical properties in DGEBA-based shape memory polymer composites." Journal of Research Updates in Polymer Science. 13, pp. 147-150.
Burden turns into benefit: Potentiality of macadamia nutshells for engineered polymer composites
Islam, Md Mainul, Khan, Md Sefat and Epaarachchi, Jayantha. 2024. "Burden turns into benefit: Potentiality of macadamia nutshells for engineered polymer composites." International Journal of Management and Applied Science (IJMAS). 10 (1), pp. 169-179.
Addressing Challenges in Engineering Education: A Case Study of Materials Technology Course
Islam, Md Mainul. 2024. "Addressing Challenges in Engineering Education: A Case Study of Materials Technology Course." Educational Research Applications. 9 (1). https://doi.org/10.29011/2575-7032.100232
Effects of Mg-based admixtures on chloride diffusion in alkali-activated fly ash-slag mortars
Zhang, Jingxiao, Ma, Yuwei, Zhang, Zuhua, Yang, Xiaocong, Nong, Xingzhong and Wang, Hao. 2024. "Effects of Mg-based admixtures on chloride diffusion in alkali-activated fly ash-slag mortars." Case Studies in Construction Materials. 21. https://doi.org/10.1016/j.cscm.2024.e03659
Recyclable thermoplastic FRP bars for reinforced concrete structures: Current status and future opportunities
Zeng, Jun-Jie, Feng, Sheng-Zhao, Zhao, Bin, Wu, Feng-Yi, Zhuge, Yan and Wang, Hao. 2024. "Recyclable thermoplastic FRP bars for reinforced concrete structures: Current status and future opportunities." Composite Structures. 348. https://doi.org/10.1016/j.compstruct.2024.118438
Proppant transport in secondary Sand fracturing using Eulerian-Eulerian multiphase model Approach
Yang, Huohai, Li, Kuncheng, Liao, Zijia, Li, Xiaogang, Rabiee, Hesamoddin, Ren, Shirui, Luo, Xinwei, Chen, Qingyuan, Ge, Lei and Wang, Hao. 2024. "Proppant transport in secondary Sand fracturing using Eulerian-Eulerian multiphase model Approach." Geoenergy Science and Engineering. 241. https://doi.org/10.1016/j.geoen.2024.213186
Fine-tuning thermal expansion characteristics of solid oxide fuel cell cathode via composite cathode fabrication
Shah, Nilam, Zhu, Tianjiu, Feng, Desheng, Xu, Xiaoyong, Liang, Fengli, Wang, Hao, Zhu, Zhonghua and Ge, Lei. 2024. "Fine-tuning thermal expansion characteristics of solid oxide fuel cell cathode via composite cathode fabrication." Journal of Power Sources. 616. https://doi.org/10.1016/j.jpowsour.2024.235143
Mechanical properties and microstructure of hemp hurd reinforced polylactide biocomposites for 3D printing
Xiao, Xianglian, Chevali, Venkata S., Song, Pingan, Yu, Bin, Feng, Jiabing, Loh, Thomas W and Wang, Hao. 2024. "Mechanical properties and microstructure of hemp hurd reinforced polylactide biocomposites for 3D printing." Polymer Composites. https://doi.org/10.1002/pc.28893
Mussel‐Inspired, Self‐Healing, Highly Effective Fully Polymeric Fire‐Retardant Coatings Enabled by Group Synergy
Ma, Zhewen, Feng, Jiabing, Huo, Siqi, Sun, Ziqi, Bourbigot, Serge, Wang, Hao, Gao, Jiefeng, Tang, Longcheng, Zheng, Wei and Song, Pingan. 2024. "Mussel‐Inspired, Self‐Healing, Highly Effective Fully Polymeric Fire‐Retardant Coatings Enabled by Group Synergy." Advanced Materials. 36 (44). https://doi.org/10.1002/adma.202410453
Rational Designing Microenvironment of Gas-Diffusion Electrodes via Microgel-Augmented CO2 Availability for High-Rate and Selective CO2 Electroreduction to Ethylene
Rabiee, Hesamoddin, Li, Mengran, Yan, Penghui, Wu, Yuming, Zhang, Xueqin, Dorosti, Fatereh, Zhang, Xi, Ma, Beibei, Hu, Shihu, Wang, Hao, Zhu, Zhonghua and Ge, Lei. 2024. "Rational Designing Microenvironment of Gas-Diffusion Electrodes via Microgel-Augmented CO2 Availability for High-Rate and Selective CO2 Electroreduction to Ethylene." Advanced Science. 11 (40). https://doi.org/10.1002/advs.202402964
Bio-derived Schiff base vitrimer with outstanding flame retardancy, toughness, antibacterial, dielectric and recycling properties
Ye, Guofeng, Wang, Cheng, Zhang, Qi, Song, Pingan, Wang, Hao, Huo, Siqi and Liu, Zhitian. 2024. "Bio-derived Schiff base vitrimer with outstanding flame retardancy, toughness, antibacterial, dielectric and recycling properties." International Journal of Biological Macromolecules. 278 (Part 3). https://doi.org/10.1016/j.ijbiomac.2024.134933
Strong yet Tough Catalyst-Free Transesterification Vitrimer with Excellent Fire-Retardancy, Durability, and Closed-Loop Recyclability
Ye, Guofeng, Huo, Siqi, Wang, Cheng, Zhang, Qi, Wang, Hao, Song, Pingan and Liu, Zhitian. 2024. "Strong yet Tough Catalyst-Free Transesterification Vitrimer with Excellent Fire-Retardancy, Durability, and Closed-Loop Recyclability ." Small. 20 (43). https://doi.org/10.1002/smll.202404634
In Situ Growth of Hierarchical Silver Sub‐Nanosheets on Zinc Nanosheets‐Based Hollow Fiber Gas‐Diffusion Electrodes for Electrochemical CO2 Reduction to CO
Chen, Guoliang, Ge, Lei, Kuang, Yizhu, Rabiee, Hesamoddin, Ma, Beibei, Dorosti, Fatereh, Nanjundan, Ashok Kumar, Zhu, Zhonghua and Wang, Hao. 2024. "In Situ Growth of Hierarchical Silver Sub‐Nanosheets on Zinc Nanosheets‐Based Hollow Fiber Gas‐Diffusion Electrodes for Electrochemical CO2 Reduction to CO." Small Science. 4 (10). https://doi.org/10.1002/smsc.202400184
Bio-inspired fabrication of brick-and-mortar interphase in carbon fiber/epoxy composites with significantly improved high-temperature durability
Li, Hefeng, Liu, Cong, Zhu, Jiabao, Huan, Xianhua, Qi, Pengfei, Xu, Ke, Geng, Hongbo, Guo, Xiaodong, Wu, Haoming, Zu, Lei, Ge, Lei, Jia, Xiaolong, Yang, Xiaoping and Wang, Hao. 2024. "Bio-inspired fabrication of brick-and-mortar interphase in carbon fiber/epoxy composites with significantly improved high-temperature durability." Advanced Composites and Hybrid Materials. 7 (2). https://doi.org/10.1007/s42114-024-00876-9
Review of porous vegetation eco-concrete (PVEC) technology: From engineering requirements to material design
Zheng, Chaowei, Zhang, Zuhua, Chen, Ziye, Wang, Dongyu, Wang, Wenjing, Zhou, Zhengning, Zhu, Yingcan, Wang, Dongmin, Wang, Hao and Jiang, Zhengwu. 2024. "Review of porous vegetation eco-concrete (PVEC) technology: From engineering requirements to material design." Composites Part B: Engineering. 279. https://doi.org/10.1016/j.compositesb.2024.111442
Non-covalent and covalent-synergistical-interaction assembled GO self-supporting membrane with excellent alignment for ultrahigh H2 barrier applications
Liu, Cong, Li, Hefeng, Zhu, Jiabao, Huan, Xianhua, Xu, Ke, Geng, Hongbo, Guo, Xiaodong, Ge, Lei, Jia, Xiaolong, Yang, Xiaoping and Wang, Hao. 2024. "Non-covalent and covalent-synergistical-interaction assembled GO self-supporting membrane with excellent alignment for ultrahigh H2 barrier applications." Composites Part B: Engineering. 283. https://doi.org/10.1016/j.compositesb.2024.111652
Spider silk-inspired heterogeneous interphase featuring hybrid interaction for simultaneously improving the interfacial strength and fracture toughness between carbon fiber and epoxy by regulating hydrogen bond density
Li, Hefeng, Liu, Cong, Zhu, Jiabao, Sun, Jiangman, Huan, Xianhua, Geng, Hongbo, Li, Tianming, Ge, Lei, Jia, Xiaolong, Yang, Xiaoping and Wang, Hao. 2024. "Spider silk-inspired heterogeneous interphase featuring hybrid interaction for simultaneously improving the interfacial strength and fracture toughness between carbon fiber and epoxy by regulating hydrogen bond density." Composites Part B: Engineering. 280. https://doi.org/10.1016/j.compositesb.2024.111476
Development of single-component epoxy resin with superb thermal stability, flame retardancy, smoke suppression, and latency via Cu-based phosphorus/imidazole-containing complex
Wang, Jingsheng, Wang, Jun, Yang, Shuang, Wu, Chaoqun, Chen, Xi, Chen, Kaiwen, Song, Pingan, Wang, Hao and Huo, Siqi. 2024. "Development of single-component epoxy resin with superb thermal stability, flame retardancy, smoke suppression, and latency via Cu-based phosphorus/imidazole-containing complex." Polymer Degradation and Stability. 228. https://doi.org/10.1016/j.polymdegradstab.2024.110906
A P/N/Si-containing hyperbranched flame retardant for improving mechanical performances, fire safety, and UV resistance of epoxy resins
Wang, Haonan, Huo, Siqi, Wang, Cheng, Ye, Guofeng, Zhang, Qi, Song, Pingan, Wang, Hao and Liu, Zhitian. 2024. "A P/N/Si-containing hyperbranched flame retardant for improving mechanical performances, fire safety, and UV resistance of epoxy resins." Progress in Organic Coatings. 193. https://doi.org/10.1016/j.porgcoat.2024.108562
Steering CO Selectivity in CO2 Electroreduction over Silver Microtubular Gas-Diffusion Electrodes via Surface Reconstruction
Kuang, Yizhu, Chen, Guoliang, Rabiee, Hesamoddin, Ma, Beibei, Dorosti, Fatereh, Nanjundan, Ashok Kumar, Zhu, Zhonghua, Wang, Hao and Ge, Lei. 2024. "Steering CO Selectivity in CO2 Electroreduction over Silver Microtubular Gas-Diffusion Electrodes via Surface Reconstruction." Energy and Fuels. 38 (11), pp. 10096-10105. https://doi.org/10.1021/acs.energyfuels.4c01240
Hollow fiber gas-diffusion electrodes with tailored crystal facets for tuning syngas production in electrochemical CO2 reduction
Chen, Guoliang, Ge, Lei, Kuang, Yizhu, Rabiee, Hesamoddin, Ma, Beibei, Dorosti, Fatereh, Nanjundan, Ashok Kumar, Zhu, Zhonghua and Wang, Hao. 2024. "Hollow fiber gas-diffusion electrodes with tailored crystal facets for tuning syngas production in electrochemical CO2 reduction." Chemical Engineering Journal. 490, p. 151651. https://doi.org/10.1016/j.cej.2024.151651
Electrochemical CO2 reduction integrated with membrane/adsorption-based CO2 capture in gas-diffusion electrodes and electrolytes
Rabiee, Hesamoddin, Yan, Penghui, Wang, Hao, Zhu, Zhonghua and Ge, Lei. 2024. "Electrochemical CO2 reduction integrated with membrane/adsorption-based CO2 capture in gas-diffusion electrodes and electrolytes." EcoEnergy. 2 (1), pp. 3-21. https://doi.org/10.1002/ece2.23
A 2D biobased P/N-containing aggregate for boosting fire retardancy of PA6/aluminum diethylphosphinate via synergy
Lu, Yixia, Feng, Jiabing, Chu, Tao, Huo, Siqi, Xie, Hongyan, Xu, Zhiguang, Wang, Hao and Song, Pingan. 2024. "A 2D biobased P/N-containing aggregate for boosting fire retardancy of PA6/aluminum diethylphosphinate via synergy ." Journal of Materials Science and Technology. 198, pp. 73-82. https://doi.org/10.1016/j.jmst.2024.03.001
Compressive performance of full-scale GFRP composite sandwich wall panels with wood core
Yan, Zhihao, Shen, Chunyan, Fang, Hai, Xie, Lei, Bao, Xiangyu and Wang, Hao. 2024. "Compressive performance of full-scale GFRP composite sandwich wall panels with wood core." Journal of Building Engineering. 86. https://doi.org/10.1016/j.jobe.2024.108979
Mitigating thermal expansion effects in solid oxide fuel cell cathodes: A critical review
Shah, Nilam, Xu, Xiaoyong, Love, Jonathan, Wang, Hao, Zhu, Zhonghua and Ge, Lei. 2024. "Mitigating thermal expansion effects in solid oxide fuel cell cathodes: A critical review." Journal of Power Sources. 599. https://doi.org/10.1016/j.jpowsour.2024.234211
Fabrication of flame-retardant, strong, and tough epoxy resins by solvent-free polymerization with bioderived, reactive flame retardant
Ye, Guofeng, Huo, Siqi, Wang, Cheng, Zhang, Qi, Wang, Bingtao, Guo, Zhenghong, Wang, Hao and Liu, Zhitian. 2024. "Fabrication of flame-retardant, strong, and tough epoxy resins by solvent-free polymerization with bioderived, reactive flame retardant." Sustainable Materials and Technologies. 39. https://doi.org/10.1016/j.susmat.2024.e00853
Multifunctional phosphorus-containing imidazoliums endowing one-component epoxy resins with superior thermal latency, heat resistance, mechanical properties, and fire safety
Wang, Jingsheng, Wang, Jun, Yang, Shuang, Chen, Xi, Chen, Kaiwen, Zhou, Gen, Liu, Xian, Xu, Lin, Huo, Siqi, Song, Pingan and Wang, Hao. 2024. "Multifunctional phosphorus-containing imidazoliums endowing one-component epoxy resins with superior thermal latency, heat resistance, mechanical properties, and fire safety." Chemical Engineering Journal. 485. https://doi.org/10.1016/j.cej.2024.149852
Machine learning for expediting next-generation of fire-retardant polymer composites
Jafari, Pooya, Zhang, Ruoran, Huo, Siqi, Wang, Qingsheng, Yong, Jianming, Hong, Min, Deo, Ravinesh, Wang, Hao and Song, Pingan. 2024. "Machine learning for expediting next-generation of fire-retardant polymer composites." Composites Communications. 45. https://doi.org/10.1016/j.coco.2023.101806
Strong synergistic effects between P/N-containing supramolecular microplates and aluminum diethylphosphinate for fire-retardant PA6
Lu, Yixia, Feng, Jiabing, Yi, Degi, Xie, Hongyan, Xu, Zhiguang, Cao, Cheng-Fei, Huo, Siqi, Wang, Hao and Song, Pingan. 2024. "Strong synergistic effects between P/N-containing supramolecular microplates and aluminum diethylphosphinate for fire-retardant PA6." Composites Part A: Applied Science and Manufacturing. 176. https://doi.org/10.1016/j.compositesa.2023.107834
Construction of an epoxidized, phosphorus-based poly (styrene butadiene styrene) and its application in high-performance epoxy resin
Wang, Cheng, Huo, Siqi, Ye, Guofeng, Wang, Bingtao, Guo, Zhenghong, Zhang, Qi, Song, Pingan, Wang, Hao and Liu, Zhitian. 2024. "Construction of an epoxidized, phosphorus-based poly (styrene butadiene styrene) and its application in high-performance epoxy resin." Composites Part B: Engineering. 268. https://doi.org/10.1016/j.compositesb.2023.111075
Assessment of the performance of alkali-activated slag/fly ash using liquid and solid activators: early-age properties and efflorescence
Gong, Jihao, Ma, Yuwei, Wang, Yanru, Cao, Yubin, Fu, Jiyang and Wang, Hao. 2024. "Assessment of the performance of alkali-activated slag/fly ash using liquid and solid activators: early-age properties and efflorescence." Journal of Sustainable Cement-Based Materials. 13 (2), pp. 300-310. https://doi.org/10.1080/21650373.2023.2266837
Pathways to Next-Generation Fire-Safe Alkali-Ion Batteries
Zhang, Yubai, Feng, Jiabing, Jiadong, Qin, Zhong, Yu Lin, Zhang, Shanqing, Wang, Hao, Bell, John, Guo, Zaiping and Song, Pingan. 2023. "Pathways to Next-Generation Fire-Safe Alkali-Ion Batteries." Advanced Science. 10 (24). https://doi.org/10.1002/advs.202301056
Fibre Reinforced Polymer Wall Assemblies in Axial Compression
Xie, Lei, Qi, Yujun, Bai, Yu, Qui, Chengyu, Wang, Hao, Fang, Hai and Zhao, Xiao-Ling. 2023. "Fibre Reinforced Polymer Wall Assemblies in Axial Compression." Bai, Yu (ed.) Composites for Building Assembly: Connections, Members and Structures. Singapore. Springer Science and Business Media Deutschland GmbH. pp. 143-166
Fibre Reinforced Polymer Columns with Bolted Sleeve Joints under Eccentric Compression
Xie, Lei, Bai, Yu, Qi, Yujun and Wang, Hao. 2023. "Fibre Reinforced Polymer Columns with Bolted Sleeve Joints under Eccentric Compression." Bai, Yu (ed.) Composites for Building Assembly: Connections, Members and Structures. Singapore. Springer Science and Business Media Deutschland GmbH. pp. 167-185
Fibre Reinforced Polymer Columns in Axial Compression
Xie, Lei, Bai, Yu, Qi, Yujun, Caprani, Colin and Wang, Hao. 2023. "Fibre Reinforced Polymer Columns in Axial Compression." Bai, Yu (ed.) Composites for Building Assembly: Connections, Members and Structures. Singapore. Springer Science and Business Media Deutschland GmbH. pp. 121-142
Past, present and future prospective of global carbon fibre composite developments and applications
Zhang, Jin, Lin, Gang, Vaidya, Uday and Wang, Hao. 2023. "Past, present and future prospective of global carbon fibre composite developments and applications." Composites Part B: Engineering. 250. https://doi.org/10.1016/j.compositesb.2022.110463
Retarding effect of gypsum for hybrid alkali-activated cements (HAACs) at ambient temperature
Xue, Lili, Zhang, Zuhua, Walkley, Brant, Liu, Hongfei, Jiang, Yuanhai and Wang, Hao. 2023. "Retarding effect of gypsum for hybrid alkali-activated cements (HAACs) at ambient temperature." Materials Today Communications. 35. https://doi.org/10.1016/j.mtcomm.2023.106182
Intrinsic sulfuric acid resistance of C-(N)-A-S-H and N-A-S-H gels produced by alkali-activation of synthetic calcium aluminosilicate precursors
Wang, Yanru, Cao, Yubin, Zhang, Zuhua, Zhang, Peng, Ma, Yuwei, Wang, Aiguo and Wang, Hao. 2023. "Intrinsic sulfuric acid resistance of C-(N)-A-S-H and N-A-S-H gels produced by alkali-activation of synthetic calcium aluminosilicate precursors." Cement and Concrete Research. 165. https://doi.org/10.1016/j.cemconres.2022.107068
Enhancing fiber-matrix interface in carbon fiber/poly ether ether ketone (CF/PEEK) composites by carbon nanotube reinforcement of crystalline PEEK sizing
Wang, Shengdao, Wang, Tianjiao, Zhang, Shuwen, Dong, Zhongxin, Chevali, Venkata S., Yang, Yanchao, Wang, Guibin and Wang, Hao. 2023. "Enhancing fiber-matrix interface in carbon fiber/poly ether ether ketone (CF/PEEK) composites by carbon nanotube reinforcement of crystalline PEEK sizing." Composites Part B: Engineering. 251. https://doi.org/10.1016/j.compositesb.2022.110470
Microplastic materials in the environment: Problem and strategical solutions
Tian, Wenjie, Song, Pingan, Zhang, Huayang, Duan, Xiaoguang, Wei, Yen, Wang, Hao and Wang, Shaobin. 2023. "Microplastic materials in the environment: Problem and strategical solutions." Progress in Materials Science. 132. https://doi.org/10.1016/j.pmatsci.2022.101035
Effect of fly ash to slag ratio and Na2O content on leaching behaviour of fly Ash/Slag based alkali activated materials
Srinivasamurthy, Lakshmikanth Lakshmikanth, Chevali, Venkata S., Zhang, Zuhua and Wang, Hao. 2023. "Effect of fly ash to slag ratio and Na2O content on leaching behaviour of fly Ash/Slag based alkali activated materials." Construction and Building Materials. 383. https://doi.org/10.1016/j.conbuildmat.2023.131234
A path forward: Understanding and mitigating defects in polycrystalline membranes
Dorosti, Fatereh Dorosti, Ge, Lei, Wang, Hao and Zhu, Zhonghua. 2023. "A path forward: Understanding and mitigating defects in polycrystalline membranes." Progress in Materials Science. 137. https://doi.org/10.1016/j.pmatsci.2023.101123
Exploring the Prospects of Macadamia Nutshells for Bio-Synthetic Polymer Composites: A Review
Khan, Md Sefat, Islam, Md Mainul, Epaarachchi, Jayantha and Shibata, Shinichi. 2023. "Exploring the Prospects of Macadamia Nutshells for Bio-Synthetic Polymer Composites: A Review." Polymers. 2023 (15). https://doi.org/10.3390/polym15194007
Thermo-Mechanical Behavior of Green Sandwich Structures for Building and Construction Applications
Hossain, Forhad, Arifuzzaman, Md, Islam, Md Shariful and Islam, Md Mainul. 2023. "Thermo-Mechanical Behavior of Green Sandwich Structures for Building and Construction Applications." Processes. 2023 (11). https://doi.org/10.3390/pr11082456
A phosphorus-containing aliphatic amine curing agent towards intrinsic flame-retardant and smoke-suppressive epoxy resins
Yang, Qingshan, Wang, Jun, Yang, Shuang, Huo, Siqi, Song, Pingan, Fang, Zhengping and Wang, Hao. 2023. "A phosphorus-containing aliphatic amine curing agent towards intrinsic flame-retardant and smoke-suppressive epoxy resins." Journal of Polymer Research. 30 (2). https://doi.org/10.1007/s10965-023-03437-8
Phosphaphenanthrene-modified zirconium phosphate nanosheets for improving fire resistance, smoke suppression and water tolerance of intumescent coatings
Wang, Cheng, Huo, Siqi, Ye, Guofeng, Fang, Zhengping, Wang, Hao and Liu, Zhitian. 2023. "Phosphaphenanthrene-modified zirconium phosphate nanosheets for improving fire resistance, smoke suppression and water tolerance of intumescent coatings." Journal of Coatings Technology and Research. 20 (4), p. 1353–1367. https://doi.org/10.1007/s11998-022-00749-0
A P/Si-containing polyethylenimine curing agent towards transparent, durable fire-safe, mechanically-robust and tough epoxy resins
Wang, Cheng, Huo, Siqi, Ye, Guofeng, Song, Pingan, Wang, Hao and Liu, Zhitian. 2023. "A P/Si-containing polyethylenimine curing agent towards transparent, durable fire-safe, mechanically-robust and tough epoxy resins." Chemical Engineering Journal. 451. https://doi.org/10.1016/j.cej.2022.138768
Durable flame-retardant, strong and tough epoxy resins with well-preserved thermal and optical properties via introducing a bio-based, phosphorus-phosphorus, hyperbranched oligomer
Ye, Guofeng, Huo, Siqi, Wang, Cheng, Song, Pingan, Fang, Zhengping, Wang, Hao and Liu, Zhitian. 2023. "Durable flame-retardant, strong and tough epoxy resins with well-preserved thermal and optical properties via introducing a bio-based, phosphorus-phosphorus, hyperbranched oligomer." Polymer Degradation and Stability. 207. https://doi.org/10.1016/j.polymdegradstab.2022.110235
A benzimidazolyl-substituted cyclotriphosphazene and its application in benzoxazine: Curing behaviors, thermal properties, and fire safety
Wu, Feifan, Wang, Jun, Wang, Jingsheng, Chen, Kaiwen, Yang, Shuang, Huo, Siqi and Wang, Hao. 2023. "A benzimidazolyl-substituted cyclotriphosphazene and its application in benzoxazine: Curing behaviors, thermal properties, and fire safety." Journal of Polymer Science. 61 (5), pp. 422-431. https://doi.org/10.1002/pol.20220586
Inherent flame-retardant vinyl ester resins with improved heat resistance enabled by additional P/N-containing cross-linking points
Qiu, Mei, Chen, Xi, Wang, Jun, Wang, Jingsheng, Chen, Kaiwen, Yang, Shuang, Huo, Siqi and Wang, Hao. 2023. "Inherent flame-retardant vinyl ester resins with improved heat resistance enabled by additional P/N-containing cross-linking points." Journal of Applied Polymer Science. 140 (23). https://doi.org/10.1002/app.53937
High-performance, intrinsically fire-safe, single-component epoxy resins and carbon fiber reinforced epoxy composites based on two phosphorus-derived imidazoliums
Wang, Jingsheng, Chen, Xi, Wang, Jun, Yang, Shuang, Chen, Kaiwen, Zhu, Lu, Huo, Siqi, Song, Pingan and Wang, Hao. 2023. "High-performance, intrinsically fire-safe, single-component epoxy resins and carbon fiber reinforced epoxy composites based on two phosphorus-derived imidazoliums." Polymer Degradation and Stability. 208. https://doi.org/10.1016/j.polymdegradstab.2023.110261
A phosphorus-containing tertiary amine hardener enabled flame retardant, heat resistant and mechanically strong yet tough epoxy resins
Yang, Qingshan, Wang, Jun, Chen, Xi, Yang, Shuang, Huo, Siqi, Chen, Qiufei, Guo, Pengzong, Wang, Xiao, Liu, Fu, Chen, Wei, Song, Pingan and Wang, Hao. 2023. "A phosphorus-containing tertiary amine hardener enabled flame retardant, heat resistant and mechanically strong yet tough epoxy resins." Chemical Engineering Journal. 468. https://doi.org/10.1016/j.cej.2023.143811
Thermal stability of limestone calcined clay cement (LC3) at moderate temperatures 100–400 °C
Cao, Yubin, Wang, Yanru, Zhang, Zuhu, Ma, Yuwei and Wang, Hao. 2023. "Thermal stability of limestone calcined clay cement (LC3) at moderate temperatures 100–400 °C ." Cement and Concrete Composites. 135, pp. 1-15. https://doi.org/10.1016/j.cemconcomp.2022.104832
Sunlight to heal mortar cracks: Photocatalytic self-healing mortar
Zhou, Yiming, Elchalakani, Mohamed, Du, Peng, Sun, Chuanzhi, Zhang, Zuhua and Wang, Hao. 2023. "Sunlight to heal mortar cracks: Photocatalytic self-healing mortar ." Cement and Concrete Composites. 135, pp. 1-14. https://doi.org/10.1016/j.cemconcomp.2022.104816
Flame-retardant poly (L-lactic acid) with enhanced UV protection and well-preserved mechanical properties by a furan-containing polyphosphoramide
Yu, Lingfeng, Huo, Siqi, Wang, Cheng, Ye, Guofeng, Song, Pingan, Feng, Jiabing, Fang, Zhenping, Wang, Hao and Liu, Zhitian. 2023. "Flame-retardant poly (L-lactic acid) with enhanced UV protection and well-preserved mechanical properties by a furan-containing polyphosphoramide." International Journal of Biological Macromolecules. 234. https://doi.org/10.1016/j.ijbiomac.2023.123707
Atom-economic synthesis of an oligomeric P/N-containing fire retardant towards fire-retarding and mechanically robust polylactide biocomposites
Feng, Jiabing, Lu, Yixia, Xie, Hongyan, Zhang, Yan, Huo, Siqi, Liu, Xiaohuan, Flynn, Matt, Xu, Zhiguang, Burey, Paulomi, Lynch, Mark, Wang, Hao and Song, Pingan. 2023. "Atom-economic synthesis of an oligomeric P/N-containing fire retardant towards fire-retarding and mechanically robust polylactide biocomposites." Journal of Materials Science and Technology. 160, pp. 86-95. https://doi.org/10.1016/j.jmst.2023.04.003
Investigation of Gas Release from Recycled Plastic Shopping Bags during Melting at Low Temperatures
Eberhard, Susette, Bowtell, Les, Lenske, Brian and Islam, Mainul. 2023. "Investigation of Gas Release from Recycled Plastic Shopping Bags during Melting at Low Temperatures." Advances in Materials Science and Engineering. 2023, pp. 1-9. https://doi.org/10.1155/2023/2378231
Enhancement of the Mechanical and Thermal Properties of Polypropylene and Nylon 6.6 Composite Blends
Al-Haik, Mohammad Yousef, Aldajah, Saud Hamad, Kabir, Mohammad Mazedul, Siddique, Waseem Ahmad, Haik, Yousef and Islam, Md Mainul. 2023. "Enhancement of the Mechanical and Thermal Properties of Polypropylene and Nylon 6.6 Composite Blends." Advances in Materials Science and Engineering. 2023. https://doi.org/10.1155/2023/6535067
Tuning Flow-through Cu-based Hollow Fiber Gas-diffusion Electrode for High-efficiency Carbon Monoxide (CO) Electroreduction to C2+ products
Rabiee, Hesamoddin, Heffernan, James K., Ge, Lei, Zhang, Xueqin, Yan, Penghui, Marcellin, Esteban, Hu, Shihu, Zhu, Zhonghua, Wang, Hao and Yuan, Zhiguo. 2023. "Tuning Flow-through Cu-based Hollow Fiber Gas-diffusion Electrode for High-efficiency Carbon Monoxide (CO) Electroreduction to C2+ products." Applied Catalysis B: Environment and Energy. 330, p. 122589. https://doi.org/10.1016/j.apcatb.2023.122589
Bioinspired Strong, Tough, and Biodegradable Poly(Vinyl Alcohol) and its Applications as Substrates for Humidity Sensors
Liu, Lei, Xu, Xiaodong, Zhu, Menghe, Cui, Xihua, Feng, Jiabing, Faraji Rad, Zahra, Wang, Hao and Song, Pingan. 2023. "Bioinspired Strong, Tough, and Biodegradable Poly(Vinyl Alcohol) and its Applications as Substrates for Humidity Sensors." Advanced Materials Technologies. https://doi.org/10.1002/admt.202201414
High‐concentration electrosynthesis of formic acid/formate from CO2: reactor and electrode design strategies
Kuang, Yizhu, Rabiee,Hesamoddin, Ge, Lei, Rufford, Thomas E., Yuan, Zhiguo, Bell, John and Wang, Hao. 2023. "High‐concentration electrosynthesis of formic acid/formate from CO2: reactor and electrode design strategies." Energy and Environmental Materials. https://doi.org/10.1002/eem2.12596
A novel hyperbranched phosphorus-boron polymer for transparent, flame-retardant, smoke-suppressive, robust yet tough epoxy resins
Ye, Guofeng, Huo, Siqi, Wang, Cheng, Shi, Qiu, Yu, Lingfeng, Liu, Zhitian, Fang, Zhengping and Wang, Hao. 2021. "A novel hyperbranched phosphorus-boron polymer for transparent, flame-retardant, smoke-suppressive, robust yet tough epoxy resins." Composites Part B: Engineering. 227, pp. 1-13. https://doi.org/10.1016/j.compositesb.2021.109395
One-step and green synthesis of a bio-based high-efficiency flame retardant for poly (lactic acid)
Ye, Guofeng, Huo, Siqi, Wang, Cheng, Shi, Qiu, Liu, Zhitian and Wang, Hao. 2021. "One-step and green synthesis of a bio-based high-efficiency flame retardant for poly (lactic acid)." Polymer Degradation and Stability. 192, pp. 1-9. https://doi.org/10.1016/j.polymdegradstab.2021.109696
Structure, chain dynamics and mechanical properties of poly(vinyl alcohol)/phytic acid composites
Li, Lujuan, Xu, Xiaodong, Wang, Bingtao, Song, Pingan, Cao, Qianqian, Yang, Yang, Xu, Zhiguang and Wang, Hao. 2021. "Structure, chain dynamics and mechanical properties of poly(vinyl alcohol)/phytic acid composites." Composites Communications. 28, pp. 1-6. https://doi.org/10.1016/j.coco.2021.100970
Surface doping of non-fullerene photoactive layer by soluble polyoxometalate for printable organic solar cells
Hu, Lin, You, Wen, Sun, Lulu, Yu, Shen, Yang, Mengyuan, Wang, Hao, Li, Zaifang and Zhou, Yinhua. 2021. "Surface doping of non-fullerene photoactive layer by soluble polyoxometalate for printable organic solar cells." Chemical Communications. 57 (21), pp. 2689-2692. https://doi.org/10.1039/d1cc00032b
Solvent-Free Synthesis of Organic−Inorganic Polyphosphoramide-Halloysite Nanohybrids for Thermally Stable and Fire-Resistant Polylactide
Feng, Jiabing, Xie, Hongyan, Xu, Zhiguang, Huang, Guobo, Cao, Cheng-Fei, Zhang, Yan, Chevali, Venkata, Song, Pingan and Wang, Hao. 2022. "Solvent-Free Synthesis of Organic−Inorganic Polyphosphoramide-Halloysite Nanohybrids for Thermally Stable and Fire-Resistant Polylactide." ACS Sustainable Chemistry and Engineering. 10 (46), p. 15223−15232. https://doi.org/10.1021/acssuschemeng.2c04899
Shape memory polymer smart plaster for orthopaedic treatments
Jeewantha, Janitha, Jayalath, Sandaruwan, Emmanuel, Chris, Herath, Madhubhashitha, Forster, Elizabeth, Islam, Mainul, Leng, Jinsong and Epaarachchi, Jayantha. 2022. "Shape memory polymer smart plaster for orthopaedic treatments." Smart Materials and Structures. 31 (11), pp. 1-14. https://doi.org/10.1088/1361-665X/ac943b
Porous coordination polymer-based composite membranes for high-temperature polymer exchange membrane fuel cells
Chen, Guoliang, Ge, Lei, Lee, Joong Hee, Zhu, Zhonghua and Wang, Hao. 2022. "Porous coordination polymer-based composite membranes for high-temperature polymer exchange membrane fuel cells." Matter. 5 (7), pp. 2031-2053. https://doi.org/10.1016/j.matt.2022.05.033
New Undisputed Evidence and Strategy for Enhanced Lattice‐Oxygen Participation of Perovskite Electrocatalyst through Cation Deficiency Manipulation
Xu, Xiaomin, Pan, Yangli, Zhong, Yijun, Shi, Chenliang, Guan, Daqin, Ge, Lei, Hu, Zhiwei, Chin, Yi‐Ying, Lin, Hong‐Ji, Chen, Chien‐Te, Wang, Hao, Jiang, San Ping and Shao, Zongping. 2022. "New Undisputed Evidence and Strategy for Enhanced Lattice‐Oxygen Participation of Perovskite Electrocatalyst through Cation Deficiency Manipulation." Advanced Science. 9 (14), pp. 1-10. https://doi.org/10.1002/advs.202200530
Regulating the reaction zone of electrochemical CO2 reduction on gas-diffusion electrodes by distinctive hydrophilic-hydrophobic catalyst layers
Rabiee, Hesamoddin, Ge, Lei, Zhao, Jing, Zhang, Xueqin, Li, Mengran, Hu, Shihu, Smart, Simon, Rufford, Thomas E., Zhu, Zhonghua, Wang, Hao and Yuan, Zhiguo. 2022. "Regulating the reaction zone of electrochemical CO2 reduction on gas-diffusion electrodes by distinctive hydrophilic-hydrophobic catalyst layers." Applied Catalysis B: Environment and Energy. 310, pp. 1-11. https://doi.org/10.1016/j.apcatb.2022.121362
Composite cathodes for protonic ceramic fuel cells: Rationales and materials
Wang, Meng, Su, Chao, Zhu, Zhonghua, Wang, Hao and Ge, Lei. 2022. "Composite cathodes for protonic ceramic fuel cells: Rationales and materials." Composites Part B: Engineering. 238, pp. 1-18. https://doi.org/10.1016/j.compositesb.2022.109881
Early research of shape memory polymer vascular stents
Jeewantha, Lama Hewage Janitha, Epaarachchi, Jayantha Ananda, Forster, Elizabeth, Islam, Mainul and Leng, Jinsong. 2022. "Early research of shape memory polymer vascular stents." Express Polymer Letters. 16 (9), pp. 902-923. https://doi.org/10.3144/expresspolymlett.2023.49
Microtubular electrodes: An emerging electrode configuration for electrocatalysis, bioelectrochemical and water treatment applications
Rabiee, Hesamoddin, Ge, Lei, Hu, Shihu, Wang, Hao and Yuan, Zhiguo. 2022. "Microtubular electrodes: An emerging electrode configuration for electrocatalysis, bioelectrochemical and water treatment applications." Chemical Engineering Journal. 450 (Part 1). https://doi.org/10.1016/j.cej.2022.138476
Mechanical property and microstructure development in alkali activated fly ash slag blends due to efflorescence
Srinivasamurthy, Lakshmikanth, Chevali, Venkata S., Zhang, Zuhua, Longhi, Marlon A., Loh, Thomas W. and Wang, Hao. 2022. "Mechanical property and microstructure development in alkali activated fly ash slag blends due to efflorescence." Construction and Building Materials. 332, pp. 1-17. https://doi.org/10.1016/j.conbuildmat.2022.127273
Flexible pressure sensors via engineering microstructures for wearable human-machine interaction and health monitoring applications
Cui, Xihua, Huang, Fengli, Zhang, Xianchao, Song, Pingan, Zheng, Hua, Chevali, Venkata, Wang, Hao and Xu, Zhiguang. 2022. "Flexible pressure sensors via engineering microstructures for wearable human-machine interaction and health monitoring applications." iScience. 25 (4), pp. 1-24. https://doi.org/10.1016/j.isci.2022.104148
Small multiamine molecule enabled fire-retardant polymeric materials with enhanced strength, toughness, and self-healing properties
Liu, Lei, Zhu, Menghe, Ma, Zhewen, Xu, Xiaodong, Dai, Jinfeng, Yu, Youming, Seraji, Seyed Mohsen, Wang, Hao and Song, Pingan. 2022. "Small multiamine molecule enabled fire-retardant polymeric materials with enhanced strength, toughness, and self-healing properties." Chemical Engineering Journal. 400, pp. 1-11. https://doi.org/10.1016/j.cej.2022.135645
Bio-inspired, sustainable and mechanically robust graphene oxide-based hybrid networks for efficient fire protection and warning
Cao, Cheng-Fei, Yu, Bin, Guo, Bi-Fan, Hu, Wan-jun, Sun, Feng-Na, Zhang, Zhao-Hui, Li, Shi-Neng, Wu, Wei, Tang, Long-Cheng, Song, Pingan and Wang, Hao. 2022. "Bio-inspired, sustainable and mechanically robust graphene oxide-based hybrid networks for efficient fire protection and warning." Chemical Engineering Journal. 439. https://doi.org/10.1016/j.cej.2022.134516
A lava-inspired micro/nano-structured ceramifiable organic-inorganic hybrid fire-extinguishing coating
Ma, Zhewen, Zhang, Jianzhong, Maluk, Cristian, Yu, Youming, Seraji, Seyed Mohsen, Yu, Bin, Wang, Hao and Song, Pingan. 2022. "A lava-inspired micro/nano-structured ceramifiable organic-inorganic hybrid fire-extinguishing coating." Matter. 5 (3), pp. 911-932. https://doi.org/10.1016/j.matt.2021.12.009
Lightweight proppants in unconventional oil and natural gas development: A review
Liao, Zijia, Li, Xiaogang, Ge, Lei, Yang, Zhaozhong, Zhu, Jingyi, Xue, Qi and Wang, Hao. 2022. "Lightweight proppants in unconventional oil and natural gas development: A review." Sustainable Materials and Technologies. 33, pp. 1-18. https://doi.org/10.1016/j.susmat.2022.e00484
Investigation of curing kinetics and internal strains to enhance performances of bisphenol A based shape memory polymers
Jeewantha, L. H. J., Emmanuel, K. D. C., Herath, H. M. C. M., Epaarachchi, J. A., Islam, M. M. and Leng, J.. 2022. "Investigation of curing kinetics and internal strains to enhance performances of bisphenol A based shape memory polymers." Materialia. 21. https://doi.org/10.1016/j.mtla.2021.101264
Study of acidic degradation of alkali-activated materials using synthetic C-(N)-A-S-H and N-A-S-H gels
Wang, Yanru, Cao, Yubin, Zhang, Zuhua, Huang, Jizhong, Zhang, Peng, Ma, Yuwei and Wang, Hao. 2022. "Study of acidic degradation of alkali-activated materials using synthetic C-(N)-A-S-H and N-A-S-H gels." Composites Part B: Engineering. 230, pp. 1-14. https://doi.org/10.1016/j.compositesb.2021.109510
Flame-retardant, transparent, mechanically-strong and tough epoxy resin enabled by high-efficiency multifunctional boron-based polyphosphonamide
Huo, Siqi, Zhou, Zhongxiao, Jiang, Jiawei, Sai, Ting, Ran, Shiya, Fang, Zhengping, Song, Pingan and Wang, Hao. 2022. "Flame-retardant, transparent, mechanically-strong and tough epoxy resin enabled by high-efficiency multifunctional boron-based polyphosphonamide." Chemical Engineering Journal. 427, pp. 1-15. https://doi.org/10.1016/j.cej.2021.131578
Fire-retardant unsaturated polyester thermosets: The state-of-the-art, challenges and opportunities
Seraji, Seyed Mohsen, Song, Pingan, Varley, Russell J., Bourbigot, Serge, Voice, Dean and Wang, Hao. 2022. "Fire-retardant unsaturated polyester thermosets: The state-of-the-art, challenges and opportunities." Chemical Engineering Journal. 430, pp. 1-18. https://doi.org/10.1016/j.cej.2021.132785
A reactive copper-organophosphate-MXene heterostructure enabled antibacterial, self-extinguishing and mechanically robust polymer nanocomposites
Liu, Lei, Zhu, Menghe, Ma, Zhewen, Xu, Xiaodong, Seraji, Seyed Mohsen, Yu, Bin, Sun, Ziqi, Wang, Hao and Song, Pingan. 2022. "A reactive copper-organophosphate-MXene heterostructure enabled antibacterial, self-extinguishing and mechanically robust polymer nanocomposites." Chemical Engineering Journal. 430, pp. 1-12. https://doi.org/10.1016/j.cej.2021.132712
A Liquid Phosphaphenanthrene-Derived Imidazole for Improved Flame Retardancy and Smoke Suppression of Epoxy Resin
Huo, Siqi, Yang, Shuang, Wang, Jun, Cheng, Jianwen, Zhang, Qianqian, Hu, Yefa, Ding, Guoping, Zhang, Qiaoxin, Song, Pingan and Wang, Hao. 2020. "A Liquid Phosphaphenanthrene-Derived Imidazole for Improved Flame Retardancy and Smoke Suppression of Epoxy Resin." ACS Applied Polymer Materials. 2 (8), pp. 3566-3575. https://doi.org/10.1021/acsapm.0c00577
Advances and challenges in eco-benign fire-retardant polylactide
Xue, Yijiao, Feng, Jiabing, Ma, Zhewen, Liu, Lina, Zhang, Yan, Dai, Jinfeng, Xu, Zhiguang, Bourbigot, Serge, Wang, Hao and Song, Pingan. 2021. "Advances and challenges in eco-benign fire-retardant polylactide." Materials Today Physics. 21, pp. 1-22. https://doi.org/10.1016/j.mtphys.2021.100568
Relationship between microstructure of AgCl film and electrochemical behavior of Ag|AgCl electrode for chloride detection
Zhang, Zhangmin, Hu, Jie, Wang, Yangyang, Shi, Ruichao, Ma, Yuwei, Huang, Haoliang, Wang, Hao, Wei, Jiangxiong and Yu, Qijun. 2021. "Relationship between microstructure of AgCl film and electrochemical behavior of Ag|AgCl electrode for chloride detection." Corrosion Science. 184, pp. 1-12. https://doi.org/10.1016/j.corsci.2021.109393
Corrosion behavior of the reinforcement in chloride-contaminated alkali-activated fly ash pore solution
Zhang, Zhangmin, Chen, Rui, Hu, Jie, Wang, Yangyang, Huang, Haoliang, Ma, Yuwei, Zhang, Zuhua, Wang, Hao, Yin, Suhong, Wei, Jiangxiong and Yu, Qijun. 2021. "Corrosion behavior of the reinforcement in chloride-contaminated alkali-activated fly ash pore solution." Composites Part B: Engineering. 224, pp. 1-14. https://doi.org/10.1016/j.compositesb.2021.109215
Design and fabrication of paper-based stretchable sensor for respiration monitoring
Shivakumar Shagle, Nishith, Nguyen, Thanh, Vu, Trung-Hieu, Nguyen, Hung, Phan, Hoang-Phuong, Dau, Van, Song, Pingan, Wang, Hao, Nguyen, Nam-Trung, Dao, Dzung and Dinh, Toan. 2021. "Design and fabrication of paper-based stretchable sensor for respiration monitoring." 20th IEEE Sensors (SENSORS 2021). Virtual 31 Oct - 04 Nov 2021 United States. https://doi.org/10.1109/SENSORS47087.2021.9639648
Electrochemical CO2 reduction in membrane-electrode assemblies
Ge, Lei, Rabiee, Hesamoddin, Li, Mengran, Subramanian, Siddhartha, Zheng, Yao, Lee, Joong Hee, Burdyny, Thomas and Wang, Hao. 2022. "Electrochemical CO2 reduction in membrane-electrode assemblies." Chem. 8 (3), pp. 663-692. https://doi.org/10.1016/j.chempr.2021.12.002
A Si-containing polyphosphoramide via green chemistry for fire-retardant polylactide with well-preserved mechanical and transparent properties
Feng, Jiabing, Ma, Zhewen, Xu, Zhiguang, Xie, Hongyan, Lu, Yixia, Maluk, Cristian, Song, Pingan, Bourbigot, Serge and Wang, Hao. 2021. "A Si-containing polyphosphoramide via green chemistry for fire-retardant polylactide with well-preserved mechanical and transparent properties." Chemical Engineering Journal. 431 (Part 3), pp. 1-13. https://doi.org/10.1016/j.cej.2021.134259
Development and characterization of shape memory polymers for non-invasive biomedical applications
Jeewantha, Janitha, Emmanuel, Chris, Herath, Madhubhashitha, Islam, Mainul and Epaarachchi, Jayantha. 2021. "Development and characterization of shape memory polymers for non-invasive biomedical applications." ASME 2021 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS2021). United States and Online New York, United States. https://doi.org/10.1115/SMASIS2021-66024
Kinetics and mechanism of synergistic adsorption and persulfate activation by N-doped porous carbon for antibiotics removals in single and binary solutions
Tian, Wenjie, Lin, Jingkai, Zhang, Huayang, Duan, Xiaoguang, Wang, Hao, Sun, Hongqi and Wang, Shaobin. 2022. "Kinetics and mechanism of synergistic adsorption and persulfate activation by N-doped porous carbon for antibiotics removals in single and binary solutions." Journal of Hazardous Materials. 423 (Part A), pp. 1-8. https://doi.org/10.1016/j.jhazmat.2021.127083
Microstructure and melting properties of Ag–Cu–In intermediate-temperature brazing alloys
Ma, Xue, Li, Liang-Feng, Zhang, Zu-Hua, Wang, Hao, Wang, En-Ze and Qiu, Tai. 2015. "Microstructure and melting properties of Ag–Cu–In intermediate-temperature brazing alloys." Rare Metals. 34 (5), pp. 324-328. https://doi.org/10.1007/s12598-015-0484-7
Interfacial effect of Cu electrode enhanced energy density of amorphous aluminum oxide dielectric capacitor
Yao, Manwen, Li, Chunyu, Su, Zhen, Li, Zaifang, Wang, Hao and Yao, Xi. 2020. "Interfacial effect of Cu electrode enhanced energy density of amorphous aluminum oxide dielectric capacitor." Journal of Alloys and Compounds. 855, pp. 1-8. https://doi.org/10.1016/j.jallcom.2020.157473
Hydration mechanisms and durability of hybrid alkaline cements (HACs): A review
Xue, Lili, Zhang, Zuhua and Wang, Hao. 2020. "Hydration mechanisms and durability of hybrid alkaline cements (HACs): A review." Construction and Building Materials. 266, pp. 1-14. https://doi.org/10.1016/j.conbuildmat.2020.121039
Early hydration kinetics and microstructure development of hybrid alkali activated cements (HAACs) at room temperature
Xue, Lili, Zhang, Zuhua and Wang, Hao. 2021. "Early hydration kinetics and microstructure development of hybrid alkali activated cements (HAACs) at room temperature." Cement and Concrete Composites. 123, pp. 1-11. https://doi.org/10.1016/j.cemconcomp.2021.104200
Surface characteristics and electrochemical behaviors of passive reinforcing steel in alkali-activated slag
Wang, Yangyang, Chen, Rui, Hu, Jie, Zhang, Zhangmin, Huang, Haoliang, Ma, Yuwei, Wei, Jiangxiong, Zhang, Zuhua, Yin, Suhong, Wang, Hao and Yu, Qijun. 2021. "Surface characteristics and electrochemical behaviors of passive reinforcing steel in alkali-activated slag." Corrosion Science. 190, pp. 1-12. https://doi.org/10.1016/j.corsci.2021.109657
Ruthenium single atoms implanted continuous MoS2-Mo2C heterostructure for high-performance and stable water splitting
Hoa, Van Hien, Tran, Duy Thanh, Prabhakaran, Sampath, Kim, Do Hwan, Hameed, Nishar, Wang, Hao, Kim, Nam Hoon and Lee, Joong Hee. 2021. "Ruthenium single atoms implanted continuous MoS2-Mo2C heterostructure for high-performance and stable water splitting." Nano Energy. 88, pp. 1-11. https://doi.org/10.1016/j.nanoen.2021.106277
Enhancing the performance of basic magnesium sulfate cement-based coral aggregate concrete through gradient composite design technology
Chu, Yingjie, Wang, Aiguo, Zhu, Yingcan, Wang, Hao, Liu, Kaiwei, Ma, Rui, Guo, Liping and Sun, Daosheng. 2021. "Enhancing the performance of basic magnesium sulfate cement-based coral aggregate concrete through gradient composite design technology." Composites Part B: Engineering. 227, pp. 1-13. https://doi.org/10.1016/j.compositesb.2021.109382
Chloride diffusion in alkali-activated fly ash/slag concretes: Role of slag content, water/binder ratio, alkali content and sand-aggregate ratio
Zhang, Jingxiao, Ma, Yuwei, Zheng, Jiazheng, Hu, Jie, Fu, Jiyang, Zhang, Zuhua and Wang, Hao. 2020. "Chloride diffusion in alkali-activated fly ash/slag concretes: Role of slag content, water/binder ratio, alkali content and sand-aggregate ratio." Construction and Building Materials. 261, pp. 1-12. https://doi.org/10.1016/j.conbuildmat.2020.119940
Photoelectrochemical Water Oxidation and Longevous Photoelectric Conversion by a Photosystem II Electrode
Tian, Wenjie, Zhang, Huayang, Sibbons, Jane, Sun, Hongqi, Wang, Hao and Wang, Shaobin. 2021. "Photoelectrochemical Water Oxidation and Longevous Photoelectric Conversion by a Photosystem II Electrode." Advanced Energy Materials. 11 (30), pp. 1-13. https://doi.org/10.1002/aenm.202100911
Enhanced removals of micropollutants in binary organic systems by biomass derived porous carbon/peroxymonosulfate
Tian, Wenjie, Lin, Jingkai, Zhang, Huayang, Duan, Xiaoguang, Sun, Hongqi, Wang, Hao and Wang, Shaobin. 2020. "Enhanced removals of micropollutants in binary organic systems by biomass derived porous carbon/peroxymonosulfate." Journal of Hazardous Materials. 408, pp. 1-10. https://doi.org/10.1016/j.jhazmat.2020.124459
Comprehensive evaluation of the piezoresistive behavior of carbon nanotube-based composite strain sensors
Tang, Zhen-Hua, Li, Yuan-Qing, Huang, Pei, Wang, Hao, Hu, Ning and Fu, Shao-Yun. 2021. "Comprehensive evaluation of the piezoresistive behavior of carbon nanotube-based composite strain sensors." Composites Science and Technology. 208, pp. 1-8. https://doi.org/10.1016/j.compscitech.2021.108761
Fire safety of composites in prefabricated buildings: From fibre reinforced polymer to textile reinforced concrete
Nguyen, Kate T.Q., Navaratnam, Satheeskumar, Mendis, Priyan, Zhang, Kevin, Barnett, Jonathan and Wang, Hao. 2020. "Fire safety of composites in prefabricated buildings: From fibre reinforced polymer to textile reinforced concrete." Composites Part B: Engineering. 187, pp. 1-12. https://doi.org/10.1016/j.compositesb.2020.107815
Optimization on the piezoresistivity of alkali-activated fly ash/slag mortar by using conductive aggregates and carbon fibers
Ma, Yuwei, Liu, Weisen, Hu, Jie, Fu, Jiyang, Zhang, Zuhua and Wang, Hao. 2020. "Optimization on the piezoresistivity of alkali-activated fly ash/slag mortar by using conductive aggregates and carbon fibers." Cement and Concrete Composites. 114, pp. 1-14. https://doi.org/10.1016/j.cemconcomp.2020.103735
Current applications of poly(lactic acid) composites in tissue engineering and drug delivery
Liu, Shan, Qin, Shuhao, He, Min, Zhou, Dengfeng, Qin, Qingdong and Wang, Hao. 2020. "Current applications of poly(lactic acid) composites in tissue engineering and drug delivery." Composites Part B: Engineering. 199, pp. 1-25. https://doi.org/10.1016/j.compositesb.2020.108238
Co/Co6Mo6C@C nanoreactors derived from ZIF-67 composite for higher alcohols synthesis
Li, Fuping, Li, Jiaquan, Wang, Kai, Ao, Min, Qiu, Jieshan, Zhang, Xiwang, Wang, Hao, Pham, Gia Hung and Liu, Shaomin. 2021. "Co/Co6Mo6C@C nanoreactors derived from ZIF-67 composite for higher alcohols synthesis." Composites Part B: Engineering. 209, pp. 1-9. https://doi.org/10.1016/j.compositesb.2021.108608
Impact Properties of the Chemically Treated Hemp Fibre Reinforced Polyester Composites
Kabir, Mohammad Mazedul, Al-Haik, Mohammad Yousef, Aldajah, Saud Hamad, Lau, Kin Tak and Wang, Hao. 2020. "Impact Properties of the Chemically Treated Hemp Fibre Reinforced Polyester Composites." Fibers and Polymers. 21 (9), pp. 2098-2110. https://doi.org/10.1007/s12221-020-9630-4
Dopant-Free Hole Transport Materials Based on a Large Conjugated Electron-Deficient Core for Efficient Perovskite Solar Cells
Hai, Jiefeng, Wu, Hao, Yin, Xinxing, Song, Jiaxing, Hu, Lin, Jin, Yingzhi, Li, Ling, Su, Zhen, Xu, Zhiguang and Wang, Hao. 2021. "Dopant-Free Hole Transport Materials Based on a Large Conjugated Electron-Deficient Core for Efficient Perovskite Solar Cells." Advanced Functional Materials. 31 (51), pp. 1-8. https://doi.org/10.1002/adfm.202105458
New development of ultra-high-performance concrete (UHPC)
Du, Jiang, Meng, Weina, Khayat, Kamal H., Bao, Yi, Guo, Pengwei, Lyu, Zhenghua, Abu-obeidah, Adi, Nassif, Hani and Wang, Hao. 2021. "New development of ultra-high-performance concrete (UHPC)." Composites Part B: Engineering. 224, pp. 1-31. https://doi.org/10.1016/j.compositesb.2021.109220
Sc and Ta-doped SrCoO3-δ perovskite as a high-performance cathode for solid oxide fuel cells
Xu, Xiaoyong, Zhao, Jie, Li, Mengran, Zhuang, Linzhou, Zhang, Jinxuan, Aruliah, Sathia, Liang, Fengli, Wang, Hao and Zhu, Zhonghua. 2019. "Sc and Ta-doped SrCoO3-δ perovskite as a high-performance cathode for solid oxide fuel cells." Composites Part B: Engineering. 178, pp. 1-7. https://doi.org/10.1016/j.compositesb.2019.107491
Pultruded GFRP square hollow columns with bolted sleeve joints under eccentric compression
Xie, Lei, Bai, Yu, Qi, Yujun and Wang, Hao. 2019. "Pultruded GFRP square hollow columns with bolted sleeve joints under eccentric compression." Composites Part B: Engineering. 162, pp. 274-282. https://doi.org/10.1016/j.compositesb.2018.11.001
Geopolymer, green alkali activated cementitious material: Synthesis, applications and challenges
Wu, Yanguang, Lu, Bowen, Bai, Tao, Wang, Hao, Du, Feipeng, Zhang, Yunfei, Cai, Lu, Jiang, Can and Wang, Wenjun. 2019. "Geopolymer, green alkali activated cementitious material: Synthesis, applications and challenges." Construction and Building Materials. 224, pp. 930-949. https://doi.org/10.1016/j.conbuildmat.2019.07.112
A biomimetic multifunctional electronic hair sensor
Liu, Ya-Feng, Huang, Pei, Li, Yuan-Qing, Liu, Qun, Tao, Jiang-Ke, Xiong, De-Jian, Hu, Ning, Yan, Cheng, Wang, Hao and Fu, Shao-Yun. 2018. "A biomimetic multifunctional electronic hair sensor." Journal of Materials Chemistry A. 7 (4), pp. 1889 - 1896. https://doi.org/10.1039/c8ta10750e
Welan gum retards the hydration of calcium sulfoaluminate
Zhang, Yu, Zhang, Zuhua, Li, Weifeng, Wang, Hao and Shen, Xiaodong. 2017. "Welan gum retards the hydration of calcium sulfoaluminate." Journal of Thermal Analysis and Calorimetry: an international forum for thermal studies. 130 (2), pp. 899-908. https://doi.org/10.1007/s10973-017-6427-9
Acid‐activated and WOx‐loaded montmorillonite catalysts and their catalytic behaviors in glycerol dehydration
Yu, Weihua, Wang, Pengpeng, Zhou, Chunhui, Zhao, Hanbin, Tong, Dongshen, Zhang, Hao, Yang, Huimin, Ji, Shengfu and Wang, Hao. 2017. "Acid‐activated and WOx‐loaded montmorillonite catalysts and their catalytic behaviors in glycerol dehydration." Chinese Journal of Catalysis. 38 (6), pp. 1087-1100. https://doi.org/10.1016/S1872-2067(17)62813-4
Cobalt hollow nanospheres: controlled synthesis, modification and highly catalytic performance for hydrolysis of ammonia borane
Wei, Wangya, Wang, Zumin, Xu, Jie, Zong, Lingbo, Zhao, Kun, Wang, Hao, Li, Haiyan and Yu, Ranbo. 2017. "Cobalt hollow nanospheres: controlled synthesis, modification and highly catalytic performance for hydrolysis of ammonia borane." Science Bulletin. 62 (5), pp. 326-331. https://doi.org/10.1016/j.scib.2017.01.012
Highly active CeO2 hollow-shell spheres with Al doping
Wang, Zumin, Jiang, Shuaiyu, Li, Yanhui, Xu, Pengfei, Zhao, Kun, Zong, Lingbo, Wang, Hao and Yu, Ranbo. 2017. "Highly active CeO2 hollow-shell spheres with Al doping." Science China Materials. 60 (7), pp. 646-653. https://doi.org/10.1007/s40843-017-9042-0
Improved thermal stability of polyethylene with rare earth trifluoromethanesulfonate
Ran, Shiya, Guo, Zhenghong, Fang, Zhengping, Li, Juan and Wang, Hao. 2018. "Improved thermal stability of polyethylene with rare earth trifluoromethanesulfonate." Composites Communications. 8, pp. 19-23. https://doi.org/10.1016/j.coco.2018.03.001
A nitrogen-doped electrocatalyst from metal–organic framework-carbon nanotube composite
Ge, Lei, Lin, Rijia, Zhu, Zhonghua and Wang, Hao. 2018. "A nitrogen-doped electrocatalyst from metal–organic framework-carbon nanotube composite." Journal of Materials Research. 33 (5), pp. 538-545. https://doi.org/10.1557/jmr.2017.416
Experimental and Theoretical Deflections of Hybrid Composite Sandwich Panel under Four-point Bending Load
Fajrin, J., Zhuge, Y., Wang, H. and Bullen, F.. 2017. "Experimental and Theoretical Deflections of Hybrid Composite Sandwich Panel under Four-point Bending Load." Civil Engineering Dimension. 19 (1), pp. 29-35. https://doi.org/10.9744/CED.19.1.29-35
The structural behavior of hybrid structural insulated panels under pure bending load
Fajrin, Jauhar, Zhuge, Yan, Bullen, Frank and Wang, Hao. 2017. "The structural behavior of hybrid structural insulated panels under pure bending load." International Journal of Technology. 8 (5), pp. 777-788. https://doi.org/10.14716/ijtech.v8i5.861
Fabric Parameter Effect on the Mechanical Properties of Woven Hemp Fabric Reinforced Composites as an Alternative to Wood Products
Misnon, I. M., Islam, M. M., Epaarachchi, J. A., Lau, K. T. and Wang, H.. 2016. "Fabric Parameter Effect on the Mechanical Properties of Woven Hemp Fabric Reinforced Composites as an Alternative to Wood Products." Advance Research in Textile Engineering. 1 (1).
Flexural behaviour of hybrid sandwich panel with natural fiber composites as the intermediate layer
Fajrin, Jauhar, Zhuge, Yan, Bullen, Frank and Wang, Hao. 2016. "Flexural behaviour of hybrid sandwich panel with natural fiber composites as the intermediate layer." Journal of Mechanical Engineering and Sciences. 10 (2), pp. 1968-1983. https://doi.org/10.15282/jmes.10.2.2016.3.0187
Construction of multilayer coatings for flame retardancy of ramie fabric using layer-by-layer assembly
Yan, Hongqiang, Zhao, Li, Fang, Zhengping and Wang, Hao. 2017. "Construction of multilayer coatings for flame retardancy of ramie fabric using layer-by-layer assembly." Journal of Applied Polymer Science. 134 (48), pp. 1-11. https://doi.org/10.1002/app.45556
Application of poly(diphenolic acid-phenyl phosphate)-based layer by layer nanocoating in flame retardant ramie fabrics
Yan, Hongqiang, Li, Nannan, Fang, Zhengping and Wang, Hao. 2017. "Application of poly(diphenolic acid-phenyl phosphate)-based layer by layer nanocoating in flame retardant ramie fabrics." Journal of Applied Polymer Science. 134 (20), pp. 1-13. https://doi.org/10.1002/app.44795
Microwave plasma rapid heating towards robust cathode/electrolyte interface for solid oxide fuel cells
Liang, Fengli, Tseng, Po-hung, Sun, Qiang, Li, Mengran, Zhou, Wei, Liu, Lian X., Wang, Hao and Zhu, Zhonghua. 2022. "Microwave plasma rapid heating towards robust cathode/electrolyte interface for solid oxide fuel cells." Journal of Colloid and Interface Science. 607 (Part 1), pp. 53-60. https://doi.org/10.1016/j.jcis.2021.08.182
Multi-attribute parametric optimisation of shape memory polymer properties for adaptive orthopaedic plasters
Jeewantha, L. H. J., Emmanuel, K. D. C., Herath, H. M. C. M., Islam, M. M., Fang, L. and Epaarachchi, J. A.. 2022. "Multi-attribute parametric optimisation of shape memory polymer properties for adaptive orthopaedic plasters." Materialia. 21, pp. 1-12. https://doi.org/10.1016/j.mtla.2022.101325
Effect of hemp fibre surface treatment on the fibre-matrix interface and the influence of cellulose, hemicellulose and lignin contents on composite strength properties
Kabir, Mohammad Mazedul, Alhaik, Mohammad Yousef, Aldajah, Saud Hamad, Lau, Kin Tak, Wang, Hao and Islam, Md Mainul. 2021. "Effect of hemp fibre surface treatment on the fibre-matrix interface and the influence of cellulose, hemicellulose and lignin contents on composite strength properties." Advances in Materials Science and Engineering. 2021, pp. 1-17. https://doi.org/10.1155/2021/9753779
Fresh and hardened properties of alkali-activated fly ash/slag binders: effect of fly ash source, surface area, and additives
Wang, Yanru, Cao, Yubin, Ma, Yuwei, Xiao, Shanshan, Hu, Jie and Wang, Hao. 2021. "Fresh and hardened properties of alkali-activated fly ash/slag binders: effect of fly ash source, surface area, and additives." Journal of Sustainable Cement-Based Materials. https://doi.org/10.1080/21650373.2021.1932637
Turning sandstone clay into supplementary cementitious material: activation and pozzolanic reactivity evaluation
Cao, Yubin, Wang, Yanru, Zhang, Zuhua, Ma, Yuwei and Wang, Hao. 2021. "Turning sandstone clay into supplementary cementitious material: activation and pozzolanic reactivity evaluation." Composites Part B: Engineering. 223, pp. 1-12. https://doi.org/10.1016/j.compositesb.2021.109137
Recent progress of utilization of activated kaolinitic clay in cementitious construction materials
Cao, Yubin, Wang, Yanru, Zhang, Zuhua, Ma, Yuwei and Wang, Hao. 2021. "Recent progress of utilization of activated kaolinitic clay in cementitious construction materials." Composites Part B: Engineering. 211, pp. 1-19. https://doi.org/10.1016/j.compositesb.2021.108636
Dynamic Nanoconfinement Enabled Highly Stretchable and Supratough Polymeric Materials with Desirable Healability and Biocompatibility
Liu, Lei, Zhu, Menghe, Xu, Xiaodong, Ma, Zhewen, Jiang, Zhen, Pich, Andrij, Wang, Hao, Song, Pingan and Li, X.. 2021. "Dynamic Nanoconfinement Enabled Highly Stretchable and Supratough Polymeric Materials with Desirable Healability and Biocompatibility." Advanced Materials. 33 (51), pp. 1-11. https://doi.org/10.1002/adma.202105829
Plant Fibers, their Composites, and Applications
Rangappa, Sanjay Mavinkere, Parameswaranpillai, Jyotishkumar, Siengchin, Suchart, Ozbakkaloglu, Togay and Wang, Hao. Rangappa, Sanjay Mavinkere, Parameswaranpillai, Jyotishkumar, Siengchin, Suchart, Ozbakkaloglu, Togay and Wang, Hao (ed.) 2022. Plant Fibers, their Composites, and Applications. India. Springer.
Introduction to plant fibers and their composites
Rangappa, Sanjay Mavinkere, Puttegowda, Madhu, Parameswaranpillai, Jyotishkumar, Siengchin, Suchart, Ozbakkaloglu, Ozbakkaloglu, Togay and Wang, Hao. 2022. "Introduction to plant fibers and their composites." Rangappa, Sanjay Mavinkere, Parameswaranpillai, Jyotishkumar, Siengchin, Suchart, Ozbakkaloglu, Togay and Wang, Hao (ed.) Plant Fibers, their Composites, and Applications. India. Elsevier. pp. 1-24
Non-thermal plasma enhances performances of biochar in wastewater treatment and energy storage applications
Zhou, Rusen, Wang, Xiaoxiang, Zhou, Renwu, Weerasinghe, Janith, Zhang, Tianqi, Xin, Yanbin, Wang, Hao, Cullen, Patrick, Wang, Hongxia and Ostrikov, Kostya Ken. 2022. "Non-thermal plasma enhances performances of biochar in wastewater treatment and energy storage applications." Frontiers of Chemical Science and Engineering. 16 (4), pp. 475-483. https://doi.org/10.1007/s11705-021-2070-x
Sulfate radical-based advanced oxidation processes for water decontamination using biomass-derived carbon as catalysts
Tian, Wenjie, Chen, Si, Zhang, Huayang, Wang, Hao and Wang, Shaobin. 2022. "Sulfate radical-based advanced oxidation processes for water decontamination using biomass-derived carbon as catalysts." Current Opinion In Chemical Engineering. 37. https://doi.org/10.1016/j.coche.2022.100838
PEDOT:PSS and Its Composites for Flexible Supercapacitors
Su, Zhen, Jin, Yingzhi, Wang, Hongmei, Li, Zaifang, Huang, Liang and Wang, Hao. 2022. "PEDOT:PSS and Its Composites for Flexible Supercapacitors." ACS Applied Energy Materials. 5 (10), pp. 11915-11932. https://doi.org/10.1021/acsaem.2c01524
Fire safety performance of 3D GFRP nanocomposite as a cladding material
Soufeiani, Leila, Nguyen, Kate.T.Q., White, Nathan, Foliente, Greg, Wang, Hao and Aye, Lu. 2022. "Fire safety performance of 3D GFRP nanocomposite as a cladding material." Fire Safety Journal. 133. https://doi.org/10.1016/j.firesaf.2022.103670
Interface modulation induced by the 1T Co-WS2 shell nanosheet layer at the metallic NiTe2/Ni core–nanoskeleton: Glib electrode-kinetics for HER, OER, and ORR
Paudel, Dasu Ram, Pan, Uday Narayan, Ghising, Ram Babu, Dhakal, Purna Prasad, Dinh, Van An, Wang, Hao, Kim, Nam Hoon and Lee, Joong Hee. 2022. "Interface modulation induced by the 1T Co-WS2 shell nanosheet layer at the metallic NiTe2/Ni core–nanoskeleton: Glib electrode-kinetics for HER, OER, and ORR." Nano Energy. 102. https://doi.org/10.1016/j.nanoen.2022.107712
State-of-the-art review of product stewardship strategies for large composite wind turbine blades
Martinez-Marquez, Daniel, Florin, Nick, Hall, Wayne, Majewski, Peter, Wang, Hao and Stewart, Rodney A.. 2022. "State-of-the-art review of product stewardship strategies for large composite wind turbine blades." Resources, Conservation and Recycling Advances. 15. https://doi.org/10.1016/j.rcradv.2022.200109
Functional Carbon Nitride Materials in Photo-Fenton-Like Catalysis for Environmental Remediation
Lin, Jingkai, Tian, Wenjie, Guan, Zheyu, Zhang, Huayang, Duan, Xiaoguang, Wang, Hao, Sun, Hongqi, Fang, Yanfen, Huang, Yingping and Wang, Shaobin. 2022. "Functional Carbon Nitride Materials in Photo-Fenton-Like Catalysis for Environmental Remediation." Advanced Functional Materials. 32 (24). https://doi.org/10.1002/adfm.202201743
Carbon nitride-based Z-scheme heterojunctions for solar-driven advanced oxidation processes
Lin, Jingkai, Tian, Wenjie, Zhang, Huayang, Duan, Xiaoguang, Sun, Hongqi, Wang, Hao, Fang, Yanfen, Huang, Yingping and Wang, Shaobin. 2022. "Carbon nitride-based Z-scheme heterojunctions for solar-driven advanced oxidation processes." Journal of Hazardous Materials. 434. https://doi.org/10.1016/j.jhazmat.2022.128866
A phosphorus/silicon-based, hyperbranched polymer for high-performance, fire-safe, transparent epoxy resins
Shi, Qui, Huo, Siqi, Wang, Cheng, Ye, Guofeng, Yu, Lingfeng, Fang, Zhengping, Wang, Hao and Liu, Zhitian. 2022. "A phosphorus/silicon-based, hyperbranched polymer for high-performance, fire-safe, transparent epoxy resins." Polymer Degradation and Stability. 203, pp. 1-12. https://doi.org/10.1016/j.polymdegradstab.2022.110065
A phosphaphenanthrene-benzimidazole derivative for enhancing fire safety of epoxy resins
Xu, Yixiang, Wang, Junjie, Zhang, Wenbin, Huo, Siqi, Fang, Zhengping, Song, Pingan, Wang, Dong and Wang, Hao. 2022. "A phosphaphenanthrene-benzimidazole derivative for enhancing fire safety of epoxy resins." Reactive and Functional Polymers. 180, pp. 1-9. https://doi.org/10.1016/j.reactfunctpolym.2022.105390
Phenylboronic acid-decorated ZrP nanosheets for enhancing fire resistance, smoke suppression, and water/acid/alkali tolerance of intumescent coatings
Wang, Cheng, Huo, Siqi, Ye, Guofeng, Shi, Qui, Fang, Zhengping, Wang, Hao and Liu, Zhitian. 2022. "Phenylboronic acid-decorated ZrP nanosheets for enhancing fire resistance, smoke suppression, and water/acid/alkali tolerance of intumescent coatings." Colloids and Surfaces A: Physicochemical and Engineering Aspects. 655. https://doi.org/10.1016/j.colsurfa.2022.130292
Flame-retardant single-component epoxy resin cured by benzimidazolyl-substituted cyclotriphosphazene: Storage stability, curing behaviors and flame retardancy
Hu, Ben, Wang, Jun, Wang, Jingsheng, Yang, Shuang, Li, Chang, Wang, Fengyi, Huo, Siqi, Song, Pingan, Fang, Zhengping and Wang, Hao. 2022. "Flame-retardant single-component epoxy resin cured by benzimidazolyl-substituted cyclotriphosphazene: Storage stability, curing behaviors and flame retardancy." Polymer Degradation and Stability. 204. https://doi.org/10.1016/j.polymdegradstab.2022.110092
Corrigendum to ’A phosphorus/silicon-based, hyperbranched polymer for high-performance, fire-safe, transparent epoxy resins’ [Polymer Degradation and Stability, 203 (2022) 110065]
Shi, Qiu, Huo, Siqi, Wang, Cheng, Ye, Guofeng, Yu, Lingfeng, Fang, Zhengping, Wang, Hao and Liu, Zhitian. 2022. "Corrigendum to ’A phosphorus/silicon-based, hyperbranched polymer for high-performance, fire-safe, transparent epoxy resins’ [Polymer Degradation and Stability, 203 (2022) 110065]." Polymer Degradation and Stability. 204. https://doi.org/10.1016/j.polymdegradstab.2022.110105
Green and Facile Synthesis of Bio-Based, Flame-Retardant, Latent Imidazole Curing Agent for Single-Component Epoxy Resin
Wang, Jingsheng, Huo, Siqi, Wang, Jun, Yang, Shuang, Chen, Kaiwen, Li, Chang, Fang, De, Fang, Zhengping, Song, Pingan and Wang, Hao. 2022. "Green and Facile Synthesis of Bio-Based, Flame-Retardant, Latent Imidazole Curing Agent for Single-Component Epoxy Resin ." ACS Applied Polymer Materials. 4 (5), pp. 3564-3574. https://doi.org/10.1021/acsapm.2c00138
Utilization of fibers in ultra-high performance concrete: A review
Gong, Jihao, Ma, Yuwei, Fu, Jiyang, Hu, Jie, Ouyang, Xiaowei, Zhang, Zuhua and Wang, Hao. 2022. "Utilization of fibers in ultra-high performance concrete: A review ." Composites Part B: Engineering. 241, pp. 1-22. https://doi.org/10.1016/j.compositesb.2022.109995
Sulphate resistance of one-part geopolymer synthesized by calcium carbide residue-sodium carbonate-activation of slag
Yang, Tao, Gao, Xuan, Zhang, Jiajia, Zhuang, Xumin, Wang, Hao and Zhang, Zuhua. 2022. "Sulphate resistance of one-part geopolymer synthesized by calcium carbide residue-sodium carbonate-activation of slag ." Composites Part B: Engineering. 242, pp. 1-14. https://doi.org/10.1016/j.compositesb.2022.110024
Chloride binding behavior of synthesized reaction products in alkali-activated slag
Cai, Weixi, Xu, Zhipeng, Zhang, Zhangmin, Hu, Jie, Huang, Haoliang, Ma, Yuwei, Zhang, Zuhua, Wang, Hao, Yin, Suhong, Wei, Jiangxiong, Shi, Caijun and Yu, Qijun. 2022. "Chloride binding behavior of synthesized reaction products in alkali-activated slag ." Composites Part B: Engineering. 238, pp. 1-19. https://doi.org/10.1016/j.compositesb.2022.109919
Review on chloride transport in alkali-activated materials: Role of precursors, activators and admixtures
Zhang, Jingxiao, Ma, Yuwei, Hu, Jie, Wang, Hao and Zhang, Zuhua. 2022. "Review on chloride transport in alkali-activated materials: Role of precursors, activators and admixtures ." Construction and Building Materials. 328, pp. 1-24. https://doi.org/10.1016/j.conbuildmat.2022.127081
Recycled sand from sandstone waste: A new source of high-quality fine aggregate
Cao, Yubin, Wang, Yanru, Zhang, Zuhua and Wang, Hao. 2022. "Recycled sand from sandstone waste: A new source of high-quality fine aggregate ." Resources, Conservation and Recycling. 179, pp. 1-11. https://doi.org/10.1016/j.resconrec.2021.106116
Alkali leaching features of 3-year-old alkali activated fly ash-slag-silica fume: For a better understanding of stability
Zhu, Yingcan, Longhi, Marlon A., Wang, Aiguo, Hou, Dongshuai, Wang, Hao and Zhang, Zuhua. 2022. "Alkali leaching features of 3-year-old alkali activated fly ash-slag-silica fume: For a better understanding of stability ." Composites Part B: Engineering. 230, pp. 1-12. https://doi.org/10.1016/j.compositesb.2021.109469
Drying shrinkage behavior of hybrid alkali activated cement (HAAC) mortars
Xue, Lili, Zhang, Zuhua, Liu, Hongfei, Jiang, Yuanhai and Wang, Hao. 2022. "Drying shrinkage behavior of hybrid alkali activated cement (HAAC) mortars ." Construction and Building Materials. 316, pp. 1-9. https://doi.org/10.1016/j.conbuildmat.2021.126068
One-pot sequence-selective synthesis of polylactone-containing block terpolymers based on renewable terpenoid-derived monomer and a simple organocatalyst
Xie, Hongyan, Feng, Jiabing, Yang, Xiaoxia, Zhao, Yan, Song, Pingan, Wang, Hao and Xu, Zhiguang. 2022. "One-pot sequence-selective synthesis of polylactone-containing block terpolymers based on renewable terpenoid-derived monomer and a simple organocatalyst." Journal of Polymer Science. 60 (20), pp. 2889-2898. https://doi.org/10.1002/pol.20220188
Fire Intumescent, High-Temperature Resistant, Mechanically Flexible Graphene Oxide Network for Exceptional Fire Shielding and Ultra-Fast Fire Warning
Cao, Cheng-fei, Yu, Bin, Chen, Zuan-Yu, Qu, Yong-Xiang, Li, Yu-Tong, Shi, Yongqian, Ma, Zhewen, Sun, Feng-Na, Pan, Qing‑Hua, Tang, Long-Cheng, Song, Pingan and Wang, Hao. 2022. "Fire Intumescent, High-Temperature Resistant, Mechanically Flexible Graphene Oxide Network for Exceptional Fire Shielding and Ultra-Fast Fire Warning." Nano-Micro Letters. 14 (1). https://doi.org/10.1007/s40820-022-00837-1
Biomimetic, Mechanically Strong Supramolecular Nanosystem Enabling Solvent Resistance, Reliable Fire Protection and Ultralong Fire Warning
Cao, Cheng-Fei, Yu, Bin, Huang, Ju, Feng, Xiao-Lan, Lv, Ling-Yu, Sun, Feng-Na, Tang, Long-Cheng, Feng, Jiabing, Song, Pingan and Wang, Hao. 2022. "Biomimetic, Mechanically Strong Supramolecular Nanosystem Enabling Solvent Resistance, Reliable Fire Protection and Ultralong Fire Warning." ACS Nano. 16 (12), pp. 20865-20876. https://doi.org/10.1021/acsnano.2c08368
Effect of dispersion time for nanoparticles in DGEBA shape memory polymer composite fabrication
Islam, Mainul. 2022. "Effect of dispersion time for nanoparticles in DGEBA shape memory polymer composite fabrication." Sapuan, S. M. et al. (ed.) International Symposium on Polymeric Materials 2022 (ISPM2022). Malaysia 14 - 15 Jun 2022 Malaysia.
Carbon fibre reinforced shape memory polymer composites for deployable space habitats
Herath, H. M. C. M., Epaarachchi, J. A., Islam, M. M. and Leng, J.. 2019. "Carbon fibre reinforced shape memory polymer composites for deployable space habitats." Engineer: Journal of the Institution of Engineers. LII (1), pp. 1-9. https://doi.org/10.4038/engineer.v52i1.7323
Bioinspired, Strong, and Tough Nanostructured Poly(vinyl alcohol)/Inositol Composites: How Hydrogen-Bond Cross-Linking Works?
Xu, Xiaodong, Li, Lujuan, Seraji, Seyed Mohsen, Liu, Lei, Jiang, Zhen, Xu, Zhiguang, Li, Xin, Zhao, Sheng, Wang, Hao and Song, Pingan. 2020. "Bioinspired, Strong, and Tough Nanostructured Poly(vinyl alcohol)/Inositol Composites: How Hydrogen-Bond Cross-Linking Works?" Macromolecules. 54 (20), pp. 9510-9521. https://doi.org/10.1021/acs.macromol.1c01725
Strong, Ultrafast, Reprogrammable Hydrogel Actuators with Muscle-Mimetic Aligned Fibrous Structures
Jiang, Zhen, Seraji, Seyed Mohsen, Tan, Xiao, Zhang, Xinxing, Dinh, Toan, Mollazade, Mahdie, Rowan, Alan E, Whittaker, Andrew K, Song, Pingan and Wang, Hao. 2021. "Strong, Ultrafast, Reprogrammable Hydrogel Actuators with Muscle-Mimetic Aligned Fibrous Structures." Chemistry of Materials. 33 (19), pp. 7818-7828. https://doi.org/10.1021/acs.chemmater.1c02312
Bioinspired, Highly Adhesive, Nanostructured Polymeric Coatings for Superhydrophobic Fire-Extinguishing Thermal Insulation Foam
Ma, Zhewen, Liu, Xiaochen, Xu, Xiaodong, Liu, Lei, Yu, Bin, Maluk, Cristian, Huang, Guobo, Wang, Hao and Song, Pingan. 2021. "Bioinspired, Highly Adhesive, Nanostructured Polymeric Coatings for Superhydrophobic Fire-Extinguishing Thermal Insulation Foam." ACS Nano. 15 (7), pp. 11667-11680. https://doi.org/10.1021/acsnano.1c02254
Functionalizing MXene towards highly stretchable, ultratough, fatigue- and fire-resistant polymer nanocomposites
Liu, Lei, Zhu, Menghe, Shi, Yongqian, Xu, Xiaodong, Ma, Zhewen, Yu, Bin, Fu, Shenyuan, Huang, Guobo, Wang, Hao and Song, Pingan. 2021. "Functionalizing MXene towards highly stretchable, ultratough, fatigue- and fire-resistant polymer nanocomposites." Chemical Engineering Journal. 424, pp. 1-13. https://doi.org/10.1016/j.cej.2021.130338
Multifunctional polyurethane sponge coatings with excellent flame retardant, antibacterial, compressible, and recyclable properties
Liu, Chengwei, Zhang, Tao, Luo, Yuxin, Wang, Yixuan, Li, Jiacheng, Ye, Ting, Guo, Ruifeng, Song, Pingan, Zhou, Jiu and Wang, Hao. 2021. "Multifunctional polyurethane sponge coatings with excellent flame retardant, antibacterial, compressible, and recyclable properties." Composites Part B: Engineering. 215, pp. 1-10. https://doi.org/10.1016/j.compositesb.2021.108785
Lightweight high-performance carbon-polymer nanocomposites for electromagnetic interference shielding
Liu, Shan, Qin, Shuhao, Jiang, Yue, Song, Pingan and Wang, Hao. 2021. "Lightweight high-performance carbon-polymer nanocomposites for electromagnetic interference shielding." Composites Part A: Applied Science and Manufacturing. 145, pp. 1-30. https://doi.org/10.1016/j.compositesa.2021.106376
Insights into the hydrogen-bond cross-linking effects of small multiamine molecules on physical and mechanical properties of poly(vinly alcohol) by molecular dynamics simulations
Li, Lujuan, Xu, Xiaodong, Song, Pingan, Cao, Qianqian, Qiao, Xin, Xu, Zhiguang, Yang, Yang, Zuo, Chuncheng and Wang, Hao. 2021. "Insights into the hydrogen-bond cross-linking effects of small multiamine molecules on physical and mechanical properties of poly(vinly alcohol) by molecular dynamics simulations." Modelling and Simulation in Materials Science and Engineering. 29 (3), pp. 1-15. https://doi.org/10.1088/1361-651X/abe0aa
Stretchable strain sensors with dentate groove structure for enhanced sensing recoverability
Cui, Xihua, Jiang, Yue, Xu, Zhiguang, Xi, Man, Jiang, Yang, Song, Pingan, Zhao, Yan and Wang, Hao. 2021. "Stretchable strain sensors with dentate groove structure for enhanced sensing recoverability." Composites Part B: Engineering. 211, pp. 1-10. https://doi.org/10.1016/j.compositesb.2021.108641
A highly fire-safe and smoke-suppressive single-component epoxy resin with switchable curing temperature and rapid curing rate
Yang, Shuang, Huo, Siqi, Wang, Jun, Zhang, Bin, Wang, Jingsheng, Ran, Shiya, Fang, Zhengping, Song, Pingan and Wang, Hao. 2021. "A highly fire-safe and smoke-suppressive single-component epoxy resin with switchable curing temperature and rapid curing rate." Composites Part B: Engineering. 207, pp. 1-11. https://doi.org/10.1016/j.compositesb.2020.108601
Water governs the mechanical properties of poly(vinyl alcohol)
Li, Lujuan, Xu, Xiaodong, Liu, Lei, Song, Pingan, Cao, Qianqian, Xu, Zhiguang, Fang, Zhengping and Wang, Hao. 2021. "Water governs the mechanical properties of poly(vinyl alcohol)." Polymer. 213, pp. 1-12. https://doi.org/10.1016/j.polymer.2020.123330
Engineering MXene surface with POSS for reducing fire hazards of polystyrene with enhanced thermal stability
Yu, Bin, Yuen, Anthony Chun Yin, Xu, Xiaodong, Zhang, Zhen-Cheng, Yang, Wei, Lu, Hongdian, Fei, Bin, Yeoh, Guan Heng, Song, Pingan and Wang, Hao. 2021. "Engineering MXene surface with POSS for reducing fire hazards of polystyrene with enhanced thermal stability." Journal of Hazardous Materials. 401, pp. 1-13. https://doi.org/10.1016/j.jhazmat.2020.123342
Transparent, highly thermostable and flame retardant polycarbonate enabled by rod-like phosphorous-containing metal complex aggregates
Sai, Ting, Ran, Shiya, Guo, Zhenghong, Yan, Hongqiang, Zhang, Yan, Wang, Hao, Song, Pingan and Fang, Zhengping. 2021. "Transparent, highly thermostable and flame retardant polycarbonate enabled by rod-like phosphorous-containing metal complex aggregates." Chemical Engineering Journal. 409, pp. 1-15. https://doi.org/10.1016/j.cej.2020.128223
Failure analysis and design of grouted fibre-composite repair system for corroded steel pipes
Shamsuddoha, Md, Manalo, Allan, Aravinthan, Thiru, Islam, Md Mainul and Djukic, Luke. 2021. "Failure analysis and design of grouted fibre-composite repair system for corroded steel pipes." Engineering Failure Analysis. 119, pp. 1-15. https://doi.org/10.1016/j.engfailanal.2020.104979
Stand-alone asymmetric hollow fiber gas-diffusion electrodes with distinguished bronze phases for high-efficiency CO2 electrochemical reduction
Rabiee, Hesamoddin, Ge, Lei, Zhang, Xueqin, Hu, Shihu, Li, Mengran, Smart, Simon, Zhu, Zhonghua, Wang, Hao and Yuan, Zhiguo. 2021. "Stand-alone asymmetric hollow fiber gas-diffusion electrodes with distinguished bronze phases for high-efficiency CO2 electrochemical reduction." Applied Catalysis B: Environment and Energy. 298, pp. 1-11. https://doi.org/10.1016/j.apcatb.2021.120538
The controllable synthesis of urchin-shaped hierarchical superstructure MOFs with high catalytic activity and stability
Wang, Zhanke, Ge, Lei, Zhang, Guangxu, Chen, Yao, Gao, Rongrong, Wang, Hao and Zhu, Zhonghua. 2021. "The controllable synthesis of urchin-shaped hierarchical superstructure MOFs with high catalytic activity and stability." Chemical Communications. 57 (70), pp. 8758-8761. https://doi.org/10.1039/d1cc03547a
Improved enzymatic activity by oriented immobilization on graphene oxide with tunable surface heterogeneity
Zhou, Wenfeng, Rao, Yuan, Zhuang, Wei, Ge, Lei, Lin, Rijia, Tang, Ting, Wu, Jinglan, Li, Ming, Yang, Pengpeng, Zhu, Chenjie, Wang, Hao and Ying, Hanjie. 2021. "Improved enzymatic activity by oriented immobilization on graphene oxide with tunable surface heterogeneity." Composites Part B: Engineering. 216. https://doi.org/10.1016/j.compositesb.2021.108788
High‐performance perovskite composite electrocatalysts enabled by controllable interface engineering
Xu, Xiaomin, Pan, Yangli, Ge, Lei, Chen, Yubo, Mao, Xin, Guan, Daqin, Li, Mengran, Zhong, Yijun, Hu, Zhiwei, Peterson, Vanessa K., Saunders, Martin, Chen, Chien‐Te, Zhang, Haijuan, Ran, Ran, Du, Aijun, Wang, Hao, Jiang, San Ping, Zhou, Wei and Shao, Zongping. 2021. "High‐performance perovskite composite electrocatalysts enabled by controllable interface engineering." Small. 17 (29), pp. 1-10. https://doi.org/10.1002/smll.202101573
Phosphorus-containing flame retardant epoxy thermosets: Recent advances and future perspectives
Huo, Siqi, Song, Pingan, Yu, Bin, Ran, Shiya, Chevali, Venkata, Liu, Lei, Fang, Zhengping and Wang, Hao. 2021. "Phosphorus-containing flame retardant epoxy thermosets: Recent advances and future perspectives." Progress in Polymer Science. 114, pp. 1-36. https://doi.org/10.1016/j.progpolymsci.2021.101366
Crystal Facet Engineering of Copper-Based Metal−Organic Frameworks with Inorganic Modulators
Wang, Zhanke, Ge, Lei, Feng, Desheng, Jiang, Zongrui, Wang, Hao, Li, Mengran, Lin, Rijia and Zhu, Zhonghua. 2021. "Crystal Facet Engineering of Copper-Based Metal−Organic Frameworks with Inorganic Modulators." Crystal Growth and Design. 21 (2), pp. 926-934. https://doi.org/10.1016/j.jssc.2021.122031
Phase changes under efflorescence in alkali activated materials with mixed activators
Srinivasamurthy, Lakshmikanth, Chevali, Venkata S., Zhang, Zuhua and Wang, Hao. 2021. "Phase changes under efflorescence in alkali activated materials with mixed activators." Construction and Building Materials. 283, pp. 1-13. https://doi.org/10.1016/j.conbuildmat.2021.122678
Development of Smart Materials for Invasive Medical Applications Using Shape Memory Polymers
Jeewantha, Lama Hewage Janitha, Islam, Md Mainul and Epaarachchi, Jayantha Ananda. 2020. "Development of Smart Materials for Invasive Medical Applications Using Shape Memory Polymers." 6th International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE 2020). Khulna, Bangladesh 19 - 21 Dec 2020 Bangladesh.
One-Pot, Solvent- and Catalyst-Free Synthesis of Polyphosphoramide as an Eco-Benign and Effective Flame Retardant for Poly(lactic acid)
Feng, Jiabing, Xu, Xiaodong, Xu, Zhiguang, Xie, Hongyan, Song, Pingan, Li, Lujuan, Huang, Guobo and Wang, Hao. 2020. "One-Pot, Solvent- and Catalyst-Free Synthesis of Polyphosphoramide as an Eco-Benign and Effective Flame Retardant for Poly(lactic acid)." ACS Sustainable Chemistry and Engineering. 8 (44), pp. 16612-16623. https://doi.org/10.1021/acssuschemeng.0c05931
Flame retardant polymeric nanocomposites through the combination of nanomaterials and conventional flame retardants
He, Wentao, Song, Pingan, Yu, Bin, Fang, Zhengping and Wang, Hao. 2020. "Flame retardant polymeric nanocomposites through the combination of nanomaterials and conventional flame retardants." Progress in Materials Science. 114, pp. 1-49. https://doi.org/10.1016/j.pmatsci.2020.100687
Polyphosphoramide-intercalated MXene for simultaneously enhancing the thermal stability, flame retardancy and mechanical properties of polylactide
Xue, Yijiao, Feng, Jiabing, Huo, Siqi, Song, Pingan, Yu, Bin, Liu, Lei and Wang, Hao. 2020. "Polyphosphoramide-intercalated MXene for simultaneously enhancing the thermal stability, flame retardancy and mechanical properties of polylactide." Chemical Engineering Journal. 397, pp. 1-11. https://doi.org/10.1016/j.cej.2020.125336
Deposition growth of Zr-based MOFs on cerium phenylphosphonate lamella towards enhanced thermal stability and fire safety of polycarbonate
Sai, Ting, Ran, Shiya, Guo, Zhenghong, Yan, Hongqiang, Zhang, Yan, Song, Pingan, Zhang, Tao, Wang, Hao and Fang, Zhengping. 2020. "Deposition growth of Zr-based MOFs on cerium phenylphosphonate lamella towards enhanced thermal stability and fire safety of polycarbonate." Composites Part B: Engineering. 197, pp. 1-12. https://doi.org/10.1016/j.compositesb.2020.108064
Synthesis and Properties Investigation of Thiophene-aromatic Polyesters: Potential Alternatives for the 2,5-Furandicarboxylic Acid-based Ones
Wang, Jing-Gang, Zhang, Xiao-Qing, Sheng, Ang, Zhu, Jin, Song, Ping-An, Wang, Hao and Liu, Xiao-Qing. 2020. "Synthesis and Properties Investigation of Thiophene-aromatic Polyesters: Potential Alternatives for the 2,5-Furandicarboxylic Acid-based Ones." Chinese Journal of Polymer Science. 38, pp. 1082-1091. https://doi.org/10.1007/s10118-020-2438-2
Flexural Analysis for Syntactic Foam Sandwich Panels
Salleh, Zulzamri, Islam, M., Epaarachchi, J., Zulkarnain, M. and Ahmed, Yaseen Adenan. 2020. "Flexural Analysis for Syntactic Foam Sandwich Panels." Saw, Chun Lin, Woo, Tze Keong, Singh, Salvinder Singh a/l Karam and Salim, Didi Asmara Bin (ed.) Regional Conference on Marine and Mechanical Engineering (ReMME'18). Ipoh, Malaysia 07 - 09 Nov 2018 Singapore. https://doi.org/10.1007/978-981-15-0002-2_5
Lignin-derived bio-based flame retardants toward high-performance sustainable polymeric materials
Yang, Haitang, Yu, Bin, Xu, Xiaodong, Bourbigot, Serge, Wang, Hao and Song, Pingan. 2020. "Lignin-derived bio-based flame retardants toward high-performance sustainable polymeric materials." Green Chemistry. 22 (7), pp. 2129-2161. https://doi.org/10.1039/D0GC00449A
Manipulating interphase reactions for mechanically robust, flame-retardant and sustainable polylactide biocomposites
Xu, Xiaodong, Dai, Jinfeng, Ma, Zhewen, Liu, Lina, Zhang, Xinghong, Liu, Hongzhi, Tang, Long-Cheng, Huang, Guobo, Wang, Hao and Song, Pingan. 2020. "Manipulating interphase reactions for mechanically robust, flame-retardant and sustainable polylactide biocomposites." Composites Part B: Engineering. 190, pp. 1-15. https://doi.org/10.1016/j.compositesb.2020.107930
Grafting Lignin with Bioderived Polyacrylates for Low-Cost, Ductile, and Fully Biobased Poly(lactic acid) Composite
Sun, Yiqi, Ma, Zhewen, Xu, Xiaodong, Liu, Xiaohuan, Liu, Lina, Huang, Guobo, Liu, Lei, Wang, Hao and Song, Pingan. 2020. "Grafting Lignin with Bioderived Polyacrylates for Low-Cost, Ductile, and Fully Biobased Poly(lactic acid) Composite." ACS Sustainable Chemistry and Engineering. 8 (5), pp. 2267-2276. https://doi.org/10.1021/acssuschemeng.9b06593
Realizing simultaneous improvements in mechanical strength, flame retardancy and smoke suppression of ABS nanocomposites from multifunctional graphene
Huang, Guobo, Huo, Siqi, Xu, Xiaodong, Chen, Wei, Jin, Yanxian, Li, Rongrong, Song, Pingan and Wang, Hao. 2019. "Realizing simultaneous improvements in mechanical strength, flame retardancy and smoke suppression of ABS nanocomposites from multifunctional graphene." Composites Part B: Engineering. 177, pp. 1-10. https://doi.org/10.1016/j.compositesb.2019.107377
Surface-coating engineering for flame retardant flexible polyurethane foams: A critical review
Yang, Haitang, Yu, Bin, Song, Pingan, Maluk, Cristian and Wang, Hao. 2019. "Surface-coating engineering for flame retardant flexible polyurethane foams: A critical review." Composites Part B: Engineering. 176, pp. 1-14. https://doi.org/10.1016/j.compositesb.2019.107185
Synthesis of decorated graphene with P, N-containing compounds and its flame retardancy and smoke suppression effects on polylactic acid
Ran, Shiya, Fang, Fang, Guo, Zhenghong, Song, Pingan, Cai, Yingfeng, Fang, Zhengping and Wang, Hao. 2019. "Synthesis of decorated graphene with P, N-containing compounds and its flame retardancy and smoke suppression effects on polylactic acid." Composites Part B: Engineering. 170, pp. 41-50. https://doi.org/10.1016/j.compositesb.2019.04.037
Improved flame resistance and thermo-mechanical properties of epoxy resin nanocomposites from functionalized graphene oxide via self-assembly in water
Fang, Fang, Ran, Shiya, Fang, Zhengping, Song, Pingan and Wang, Hao. 2019. "Improved flame resistance and thermo-mechanical properties of epoxy resin nanocomposites from functionalized graphene oxide via self-assembly in water." Composites Part B: Engineering. 165, pp. 406-416. https://doi.org/10.1016/j.compositesb.2019.01.086
One-pot scalable fabrication of an oligomeric phosphoramide towards high-performance flame retardant polylactic acid with a submicron-grained structure
Xue, Yijiao, Shen, Mingxia, Zheng, Yifei, Tao, Wenzhu, Han, Yanxin, Li, Weidong, Song, Pingan and Wang, Hao. 2020. "One-pot scalable fabrication of an oligomeric phosphoramide towards high-performance flame retardant polylactic acid with a submicron-grained structure." Composites Part B: Engineering. 183, pp. 1-12. https://doi.org/10.1016/j.compositesb.2019.107695
A bio-based ionic complex with different oxidation states of phosphorus for reducing flammability and smoke release of epoxy resins
Fang, Fang, Huo, Siqi, Shen, Haifeng, Ran, Shiya, Wang, Hao, Song, Pingan and Fang, Zhengping. 2020. "A bio-based ionic complex with different oxidation states of phosphorus for reducing flammability and smoke release of epoxy resins." Composites Communications. 17, pp. 104-108. https://doi.org/10.1016/j.coco.2019.11.011
High‐performance polymeric materials through hydrogen‐bond cross‐linking
Song, Pingan and Wang, Hao. 2020. "High‐performance polymeric materials through hydrogen‐bond cross‐linking." Advanced Materials. 32 (18). https://doi.org/10.1002/adma.201901244
Engineering Interfaces toward High-Performance Polypropylene/Coir Fiber Biocomposites with Enhanced Friction and Wear Behavior
Liu, Lina, Wang, Zhenyu, Yu, Youming, Fu, Shenyuan, Nie, Yujing, Wang, Hao and Song, Pingan. 2019. "Engineering Interfaces toward High-Performance Polypropylene/Coir Fiber Biocomposites with Enhanced Friction and Wear Behavior." ACS Sustainable Chemistry and Engineering. 7 (22), pp. 18453-18462. https://doi.org/10.1021/acssuschemeng.9b04381
Preface for special issue ‘Composites Part B’: Keynote papers from the 22nd International Conference on Composite Materials
Wang, Hao. 2021. "Preface for special issue ‘Composites Part B’: Keynote papers from the 22nd International Conference on Composite Materials ." Composites Part B: Engineering. 216. https://doi.org/10.1016/j.compositesb.2020.108570
A thermally insulating vermiculite nanosheet-epoxy nanocomposite paint as a fire-resistant wood coating
Sethurajaperumal, Abimannan, Manohar, Anagha, Banerjee, Arghya, Varrla, Eswaraiah, Wang, Hao and Ostrikov, Kostya (Ken). 2021. "A thermally insulating vermiculite nanosheet-epoxy nanocomposite paint as a fire-resistant wood coating." Nanoscale Advances. 3 (14), pp. 4235-4243. https://doi.org/10.1039/d1na00207d
Mechanical and thermal properties of glass fiber–vinyl ester resin composite for pipeline repair exposed to hot-wet conditioning
Shamsuddoha, Md, Djukic, Luke P., Islam, Md Mainul, Aravinthan, Thiru and Manalo, Allan. 2017. "Mechanical and thermal properties of glass fiber–vinyl ester resin composite for pipeline repair exposed to hot-wet conditioning." Journal of Composite Materials. 51 (11), pp. 1605-1617. https://doi.org/10.1177/0021998316661869
Recent Progress in Shape Memory Polymers in Biomedical Applications
Jeewantha, Lama Hewage Janitha, Islam, Md Mainul and Epaarachchi, Jayantha Amanda. 2019. "Recent Progress in Shape Memory Polymers in Biomedical Applications." Yang, Richard, Zhang, Leo, Zhao, Ming, Fang, Gu and Islam, Rafiqul (ed.) 1st International Conference on Mechanical and Manufacturing Engineering Research and Practice (iCMMERP-2019). Sydney, Australia 24 - 28 Nov 2019 Sydney, Australia.
Light activated shape memory polymers and composites: A review
Herath, Madhubhashitha, Epaarachchi, Jayantha, Islam, Mainul, Fang, Liang and Leng, Jinsong. 2020. "Light activated shape memory polymers and composites: A review." European Polymer Journal. 136, pp. 1-27. https://doi.org/10.1016/j.eurpolymj.2020.109912
Effects of Different Relative Humidities on Flax Fibers prior to Manufacturing Their Composites Based on the Shear Response
Moudood, Abdul, Rahman, Anisur, Ochsner, Andreas, Islam, Md Mainul, Ali, Mohammad Yeakub and Francucci, Gaston. 2020. "Effects of Different Relative Humidities on Flax Fibers prior to Manufacturing Their Composites Based on the Shear Response." Advances in Materials Science and Engineering. 2020, pp. 1-7. https://doi.org/10.1155/2020/4785970
Enhanced toughness of PLLA/PCL blends using poly(d-lactide)-poly(ε-caprolactone)-poly(d-lactide) as compatibilizer
Xiao, Xianglian, Chevali, Venkata S., Song, Pingan, Yu, Bin, Yang, Yihu and Wang, Hao. 2020. "Enhanced toughness of PLLA/PCL blends using poly(d-lactide)-poly(ε-caprolactone)-poly(d-lactide) as compatibilizer." Composites Communications. 21, pp. 1-6. https://doi.org/10.1016/j.coco.2020.100385
Mechanical properties of flax fiber‐reinforced composites at different relative humidities: Experimental, geometric, and displacement potential function approaches
Moudood, Abdul, Rahman, Anisur, Huq, Nayeem Md Lutful, Ochsner, Andreas, Islam, Md Mainul and Francucci, Gaston. 2020. "Mechanical properties of flax fiber‐reinforced composites at different relative humidities: Experimental, geometric, and displacement potential function approaches." Polymer Composites. 41 (12), pp. 4963-4973. https://doi.org/10.1002/pc.25766
Performance investigation of two AE source location techniques on a Planar Multilayer Structure
Hassan, Md. Mehedi, Khan, Md. Tawhidul Islam, Hasemura, Yuji and Islam, Md. Mainul. 2020. "Performance investigation of two AE source location techniques on a Planar Multilayer Structure." International Journal of Acoustics and Vibration. 25 (2), pp. 226-235. https://doi.org/10.20855/ijav.2020.25.21635
Direct evidence of boosted oxygen evolution over perovskite by enhanced lattice oxygen participation
Pan, Yangli, Xu, Xiaomin, Zhong, Yijun, Ge, Lei, Chen, Yubo, Veder, Jean-Pierre Marcel, Guan, Daqin, O’Hayre, Ryan, Li, Mengran, Wang, Guoxiong, Wang, Hao, Zhou, Wei and Shao, Zongping. 2020. "Direct evidence of boosted oxygen evolution over perovskite by enhanced lattice oxygen participation." Nature Communications. 11, pp. 1-10. https://doi.org/10.1038/s41467-020-15873-x
Current status of carbon fibre and carbon fibre composites recycling
Zhang, Jin, Chevali, Venkata S., Wang, Hao and Wang, Chun-Hui. 2020. "Current status of carbon fibre and carbon fibre composites recycling." Composites Part B: Engineering. 193, pp. 1-15. https://doi.org/10.1016/j.compositesb.2020.108053
Performance of rare earth organic complexes based light activated shape memory polymer composites
Herath, Madhubhashitha, Epaarachchi, Jayantha, Islam, Mainul, Fang, Liang, Zhang, Fenghua and Leng, Jinsong. 2019. "Performance of rare earth organic complexes based light activated shape memory polymer composites." 22nd International Conference on Composite Materials (ICCM-22). Melbourne, Australia 11 - 16 Aug 2019 Australia.
Remote actuation of light activated shape memory polymers via D-shaped optical fibres
Herath, Madhubhashitha, Epaarachchi, Jayantha, Islam, Mainul, Zhang, Fenghua, Leng, Jinsong, Fang, Liang, Yan, Cheng, Peng, Gang Ding and Schade, Wolfgang. 2020. "Remote actuation of light activated shape memory polymers via D-shaped optical fibres." Smart Materials and Structures. 29 (4), pp. 1-8. https://doi.org/10.1088/1361-665X/ab72ea
4D printed shape memory polymer composite structures for deployable small spacecrafts
Herath, Madhubhashitha, Islam, Mainul, Epaarachchi, Jayantha, Zhang, Fenghua and Leng, Jinsong. 2019. "4D printed shape memory polymer composite structures for deployable small spacecrafts." ASME 2019 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS 2019). Louisville, United States 09 - 11 Sep 2019 United States. https://doi.org/10.1115/SMASIS2019-5583
Enhanced thermoelectric properties of nanostructured n-type Bi2Te3 by suppressing Te vacancy through non-equilibrium fast reaction
Wang, Yuan, Liu, Wei-Di, Shi, XIao-Lei, Hong, Min, Wang, Li-Jun, Li, Meng, Wang, Hao, Zou, Jin and Chen, Zhi-Gang. 2020. "Enhanced thermoelectric properties of nanostructured n-type Bi2Te3 by suppressing Te vacancy through non-equilibrium fast reaction." Chemical Engineering Journal. 391. https://doi.org/10.1016/j.cej.2019.123513
Development of a new calcium sulfoaluminate (synthetic ye'elimite) blended PII 52.5 cement
Zhang, Yu, Zhang, Zuhua, Shi, Chaoqi, Wang, Hao and Shen, Xiaodong. 2017. "Development of a new calcium sulfoaluminate (synthetic ye'elimite) blended PII 52.5 cement." Advances in Cement Research. 29 (9), pp. 373-386. https://doi.org/10.1680/jadcr.17.00027
Accurate determination of the 'time-zero' of autogenous shrinkage in alkali-activated fly ash/slag system
Ma, Y., Yang, X., Hu, J., Zhang, Z. and Wang, H.. 2019. "Accurate determination of the 'time-zero' of autogenous shrinkage in alkali-activated fly ash/slag system." Composites Part B: Engineering. 177, pp. 1-8. https://doi.org/10.1016/j.compositesb.2019.107367
Near infrared light activated shape memory polymer composite for space applications
Herath, Madhubhashitha, Epaarachchi, Jayantha, Islam, Mainul and Leng, Jinsong. 2018. "Near infrared light activated shape memory polymer composite for space applications." Wang, Hao (ed.) 11th Asian-Australasian Conference on Composite Materials (ACCM-11). Cairns, Australia 29 Jul - 01 Aug 2018
Compression and flexural properties of ground macadamia nutshell particulate composites
Bode, Rajesh Reddy, Islam, Md Mainul and Mahmood, Muhammad Nateque. 2018. "Compression and flexural properties of ground macadamia nutshell particulate composites." Wang, Hao (ed.) 11th Asian-Australasian Conference on Composite Materials (ACCM-11). Cairns, Australia 29 Jul - 01 Aug 2018
Microstructure and wear characteristics of ATZ ceramic particle reinforced gray iron matrix surface composites
Ma, Xue, Li, Liang-feng, Zhang, Fan, Zhang, Zu-hua, Wang, Hao and Wang, En-ze. 2018. "Microstructure and wear characteristics of ATZ ceramic particle reinforced gray iron matrix surface composites." China Foundry. 15 (3), pp. 167-172. https://doi.org/10.1007/s41230-018-7211-6
New selective dissolution process to quantify reaction extent and product stability in metakaolin-based geopolymers
Longhi, Marlon, Walkley, Brant, Rodriguez, Erich D, Kirchheim, Ana P, Zhang, Zuhua and Wang, Hao. 2019. "New selective dissolution process to quantify reaction extent and product stability in metakaolin-based geopolymers." Composites Part B: Engineering. 176 (1). https://doi.org/10.1016/j.compositesb.2019.107172
Polylactide/hemp hurd biocomposites as sustainable 3D printing feedstock
Xiao, Xianglian, Chevali, Venkata S., Song, Pingan, He, Dongning and Wang, Hao. 2019. "Polylactide/hemp hurd biocomposites as sustainable 3D printing feedstock." Composites Science and Technology. 184, pp. 1-8. https://doi.org/10.1016/j.compscitech.2019.107887
Efflorescence of alkali-activated cements (geopolymers) and the impacts on material structures: A critical analysis
Longhi, Marlon, Zhang, Zuhua, Rodriguez, Erich, Kirchheim, Ana and Wang, Hao. 2019. "Efflorescence of alkali-activated cements (geopolymers) and the impacts on material structures: A critical analysis." Frontiers in Materials. 6, pp. 1-13. https://doi.org/10.3389/fmats.2019.00089
A review on mixture design methods for geopolymer concrete
Li, Ning, Shi, Caijun, Zhang, Zuhua, Wang, Hao and Liu, Yiwei. 2019. "A review on mixture design methods for geopolymer concrete." Composites Part B: Engineering. 178, pp. 1-14. https://doi.org/10.1016/j.compositesb.2019.107490
Effects of selectively triggered photothermal particles on shape memory polymer composites: an investigation on structural performance, thermomechanical characteristics and photothermal behaviour
Herath, Madhubhashitha, Epaarachchi, Jayantha, Islam, Mainul, Yan, Cheng, Zhang, Fenghua and Leng, Jinsong. 2019. "Effects of selectively triggered photothermal particles on shape memory polymer composites: an investigation on structural performance, thermomechanical characteristics and photothermal behaviour." Journal of Intelligent Material Systems and Structures. 30 (20), pp. 3124-3135. https://doi.org/10.1177/1045389X19879998
New Insights into the Degradation Behavior of Air Electrodes during Solid Oxide Electrolysis and Reversible Solid Oxide Cell Operation
Khan, Muhammad Shirjeel, Xu, Xiaoyong, Knibbe, Ruth, Rehman, Ateeq Ur, Li, Zhiheng, Yago, Anya Josefa, Wang, Hao and Zhu, Zhonghua. 2020. "New Insights into the Degradation Behavior of Air Electrodes during Solid Oxide Electrolysis and Reversible Solid Oxide Cell Operation ." Energy Technology: generation, conversion, storage, distribution. 8 (9). https://doi.org/10.1002/ente.202000241
Water absorption and chloride diffusivity of concrete under the coupling effect of uniaxial compressive load and freeze-thaw cycles
Wang, Yanru, Cao, Yubin, Zhang, Peng, Ma, Yuwei, Zhao, Tiejun, Wang, Hao and Zhang, Zuhua. 2019. "Water absorption and chloride diffusivity of concrete under the coupling effect of uniaxial compressive load and freeze-thaw cycles." Construction and Building Materials. 209, pp. 566-576. https://doi.org/10.1016/j.conbuildmat.2019.03.091
Fatigue crack analysis of ferrite material by acoustic emission technique
Khan, Md. T. I., Rashid, A. A., Hidaka, R., Hattori, N. and Islam, Md. M.. 2019. "Fatigue crack analysis of ferrite material by acoustic emission technique." Journal of Mechanical Engineering and Sciences. 13 (2), pp. 5074-5089. https://doi.org/10.15282/jmes.13.2.2019.21.0418
Thermo-mechanical properties of fused borosilicate syntactic foams
Salleh, Z., Islam, M. M., Epaarachchi, J. A. and Khan, M. T. I.. 2019. "Thermo-mechanical properties of fused borosilicate syntactic foams." Journal of Mechanical Engineering and Sciences. 13 (2), pp. 4898-4910. https://doi.org/10.15282/jmes.13.2.2019.10.0407
High Porosity in Nanostructured n-Type Bi2Te3 Obtaining Ultralow Lattice Thermal Conductivity
Wang, Yuan, Liu, Wei-Di, Gao, Han, Wang, Li-Jun, Li, Meng, Shi, Xiao-Lei, Hong, Min, Wang, Hao, Zou, Jin and Chen, Zhi-Gang. 2019. "High Porosity in Nanostructured n-Type Bi2Te3 Obtaining Ultralow Lattice Thermal Conductivity ." ACS Applied Materials and Interfaces. 11 (34), pp. 31237-31244. https://doi.org/10.1021/acsami.9b12079
An investigation on the student performance in first year fundamental engineering course, Engineering Statics
Islam, Md Mainul and Epaarachchi, Jayantha Ananda. 2018. "An investigation on the student performance in first year fundamental engineering course, Engineering Statics." Educational Research Applications. 2018 (01), pp. 1-5. https://doi.org/10.29011/2575-7032/100044
Flax fiber and its composites: an overview of water and moisture absorption impact on their performance
Moudood, Abul, Rahman, Anisur, Ochsner, Andreas, Islam, Mainul and Francucci, Gaston. 2019. "Flax fiber and its composites: an overview of water and moisture absorption impact on their performance." Journal of Reinforced Plastics and Composites. 38 (7), pp. 323-339. https://doi.org/10.1177/0731684418818893
Enhanced mechanical properties at 400 °C of carbon fabric reinforced phthalonitrile composites by high temperature postcure
Sun, Bao-Gang, Lei, Qin, Guo, Ying, Shi, Han-Qiao, Sun, Jian-Bo, Yang, Kun-Xiao, Zhou, Heng, Li, Yuan-Qing, Hu, Ning, Wang, Hao and Fu, Shao-Yun. "Enhanced mechanical properties at 400 °C of carbon fabric reinforced phthalonitrile composites by high temperature postcure ." Composites Part B: Engineering. 166, pp. 681-687. https://doi.org/10.1016/j.compositesb.2019.02.066
Sediment color tool for targeting arsenic-safe aquifers for the installation of shallow drinking water tubewells
Hossain, Mohammed, Bhattacharya, Prosun, Frape, Shaun K., Jacks, Gunnar, Islam, M. Mainul, Rahman, M. Moklesur, von Bromssen, Mattias, Hasan, M. Aziz and Ahmed, Kazi Matin. 2014. "Sediment color tool for targeting arsenic-safe aquifers for the installation of shallow drinking water tubewells." Science of the Total Environment. 493, pp. 615-625. https://doi.org/10.1016/j.scitotenv.2014.05.064
Effect of drying procedures on pore structure and phase evolution of alkali-activated cements
Zhang, Zuhua, Zhu, Yingcan, Zhu, Huajun, Zhang, Yu, Provis, John L. and Wang, Hao. 2019. "Effect of drying procedures on pore structure and phase evolution of alkali-activated cements." Cement and Concrete Composites. 96, pp. 194-203. https://doi.org/10.1016/j.cemconcomp.2018.12.003
Fire-resistant, strong and green polymer nanocomposites based on poly(lactic acid) and core-shell nanofibrous flame retardants
Feng, Jiabin, Sun, Yiqi, Song, Pingan, Lei, Weiwei, Wu, Qiang, Liu, Lina, Yu, Youming and Wang, Hao. 2017. "Fire-resistant, strong and green polymer nanocomposites based on poly(lactic acid) and core-shell nanofibrous flame retardants." ACS Sustainable Chemistry and Engineering. 5 (9), pp. 7894-7904. https://doi.org/10.1021/acssuschemeng.7b01430
Orientated growth of copper-based MOF for acetylene storage
Wang, Zhanke, Ge, Lei, Li, Mengran, Lin, Rijia, Wang, Hao and Zhu, Zhonghua. 2019. "Orientated growth of copper-based MOF for acetylene storage." Chemical Engineering Journal. 357, pp. 320-327. https://doi.org/10.1016/j.cej.2018.09.148
Bioinspired design of strong, tough, and thermally stable polymeric materials via nanoconfinement
Song, Pingan, Dai, Jinfeng, Chen, Guorong, Yu, Youming, Fang, Zhengping, Lei, Weiwei, Fu, Shenyuan, Wang, Hao and Chen, Zhi-Gang. 2018. "Bioinspired design of strong, tough, and thermally stable polymeric materials via nanoconfinement." ACS Nano. 12 (9), pp. 9266-9278. https://doi.org/10.1021/acsnano.8b04002
Fabrication of flame retardant benzoxazine semi-biocomposites reinforced by ramie fabrics with bio-based flame retardant coating
Yan, Hongqiang, Li, Nannan, Cheng, Jie, Song, Pingan, Fang, Zhengping and Wang, Hao. 2018. "Fabrication of flame retardant benzoxazine semi-biocomposites reinforced by ramie fabrics with bio-based flame retardant coating." Polymer Composites. 39 (Special issue), pp. E480-E488. https://doi.org/10.1002/pc.24617
Thermal expansion properties of fused borosilicate syntactic foams
Salleh, Zulzamri, Islam, Md Mainul and Epaarachchi, Jayantha Ananda. 2018. "Thermal expansion properties of fused borosilicate syntactic foams." Nano Hybrids and Composites. 23, pp. 39-45. https://doi.org/10.4028/www.scientific.net/NHC.23.39
Arrays of planar vacancies in superior thermoelectric Ge1−x−yCdxBiyTe with band convergence
Hong, Min, Wang, Yuan, Liu, Weidi, Matsumura, Syo, Wang, Hao, Zou, Jin and Chen, Zhi-Gang. 2018. "Arrays of planar vacancies in superior thermoelectric Ge1−x−yCdxBiyTe with band convergence." Advanced Energy Materials. 8 (30), pp. 1-10. https://doi.org/10.1002/aenm.201801837
Realizing zT of 2.3 in Ge1−x−ySbxInyTe via Reducing the Phase-Transition Temperature and Introducing Resonant Energy Doping
Hong, Min, Chen, Zhi-Gang, Yang, Lei, Zou, Yi-Chao, Dargusch, Matthew, Wang, Hao and Zou, Jin. 2018. "Realizing zT of 2.3 in Ge1−x−ySbxInyTe via Reducing the Phase-Transition Temperature and Introducing Resonant Energy Doping." Advanced Materials. 30 (11), pp. 1-8. https://doi.org/10.1002/adma.201705942
Comparative Study on the drying shrinkage and mechanical properties of geopolymer foam concrete incorporating different dosages of fiber, sand and foam agents
Abdollahnejad, Zahra, Zhang, Zuhua, Wang, Hao and Mastali, Mohammad. 2018. "Comparative Study on the drying shrinkage and mechanical properties of geopolymer foam concrete incorporating different dosages of fiber, sand and foam agents." Hordijk, D. A. and Lukovic, M. (ed.) 2017 fib Symposium: High Tech Concrete: Where Technology and Engineering Meet. Maastricht, The Netherlands 12 - 14 Jun 2017 Cham, Switzerland.
A facile way to prepare phosphorus-Nitrogen-Functionalized graphene oxide for enhancing the flame retardancy of epoxy resin
Fang, Fang, Song, Pingan, Ran, Shiya, Guo, Zhenghong, Wang, Hao and Fang, Zhenping. 2018. "A facile way to prepare phosphorus-Nitrogen-Functionalized graphene oxide for enhancing the flame retardancy of epoxy resin." Composites Communications. 10, pp. 97-102. https://doi.org/10.1016/j.coco.2018.08.001
Efflorescence and subflorescence induced microstructural and mechanical evolution in fly ash-based geopolymers
Zhang, Zuhua, Provis, John L., Reid, Andrew and Wang, Hao. 2018. "Efflorescence and subflorescence induced microstructural and mechanical evolution in fly ash-based geopolymers." Cement and Concrete Composites. 92, pp. 165-177. https://doi.org/10.1016/j.cemconcomp.2018.06.010
Flammability characteristics of chemical treated woven hemp fabric reinforced vinyl ester composites
Misnon, M. I., Islam, M. M., Epaarachchi, J. A., Chen, H., Goda, K. and Khan, M. T. I.. 2018. "Flammability characteristics of chemical treated woven hemp fabric reinforced vinyl ester composites." Science and Technology of Materials. 30 (3), pp. 174-188. https://doi.org/10.1016/j.stmat.2018.06.001
Effect of welan gum on the hydration and hardening of Portland cement
Zhang, Yu, Zhang, Zuhua, Li, Xuerun, Li, Weifeng, Shen, Xiaodong and Wang, Hao. 2018. "Effect of welan gum on the hydration and hardening of Portland cement." Journal of Thermal Analysis and Calorimetry: an international forum for thermal studies. 131 (2), pp. 1277-1286. https://doi.org/10.1007/s10973-017-6589-5
Sandwich assemblies of composites square hollow sections and thin-walled panels in compression
Xie, Lei, Qi, Yujun, Bai, Yu, Qui, Chengyu, Wang Hao, Fang, Hai and Zhao, Xiao-Ling. 2019. "Sandwich assemblies of composites square hollow sections and thin-walled panels in compression ." Thin-Walled Structures. 145. https://doi.org/10.1016/j.tws.2019.106412
Investigation of FBG sensor performance in detection of delamination damage in a half-conical shape composite component
Kakei, Ayad, Manuela, Jerry, Srinivasan, Vishwas, Sharda, Arvind, Islam, Mainul and Epaarachchi, Jayantha. 2019. "Investigation of FBG sensor performance in detection of delamination damage in a half-conical shape composite component ." 12th International Workshop on Structural Health Monitoring (IWSHM). United States 10 - 12 Sep 2019 United States. https://doi.org/10.12783/shm2019/32451
Structural performance and photothermal recovery of carbon fibre reinforced shape memory polymer
Herath, H. M .C. M., Epaarachchi, J. A., Islam, M. M., Al-Azzawi, W., Leng, J. and Zhang, F.. 2018. "Structural performance and photothermal recovery of carbon fibre reinforced shape memory polymer." Composites Science and Technology. 167, pp. 206-214. https://doi.org/10.1016/j.compscitech.2018.07.042
Thermo-mechanical behaviour and shape memory characteristics of carbon fibre reinforced epoxy
Herath, Madhubhashitha, Al-Azzawi, Wessam, Epaarachchi, Jayantha, Islam, Mainul, Robertson, Scott, Leng, Jinsong and Zhang, F.. 2018. "Thermo-mechanical behaviour and shape memory characteristics of carbon fibre reinforced epoxy." 2018 International Conference on Nanoscience and Nanotechnology (ICONN 2018). Wollongong, Australia 29 Jan - 02 Feb 2018
Fracture behaviour of bamboo fiber reinforced epoxy composites
Khan, Ziaullah, Yousif, B. F. and Islam, Mainul. 2017. "Fracture behaviour of bamboo fiber reinforced epoxy composites." Composites Part B: Engineering. 116, pp. 186-199. https://doi.org/10.1016/j.compositesb.2017.02.015
Flammability characteristics of chemical treated woven hemp fabric
Misnon, Mohd Iqbal, Islam, Md Mainul, Epaarachchi, Jayantha Ananda, Chen, Haizhen, Goda, Koichi and Khan, Md Tawhidul Islam. 2018. "Flammability characteristics of chemical treated woven hemp fabric." Advances in Materials Science and Engineering. 5 (1), pp. 1-20. https://doi.org/10.5121/msej.2018.5101
Effects of water absorption on mechanical properties of glass microballoons/vinyl ester syntactic foams
Salleh, Zulzamri, Islam, Md Mainul, Epaarachchi, Jayantha Ananda and Khan, Md Tawhidul Islam. 2018. "Effects of water absorption on mechanical properties of glass microballoons/vinyl ester syntactic foams." Research and Reviews in Materials Science and Chemistry. 8 (1), pp. 59-119.
Evaluation of delamination crack tip in woven fibre glass reinforced polymer composite using FBG sensor spectra and thermo-elastic response
Kakei, Ayad, Epaarachchi, J. A., Islam, Mainul and Leng, J.. 2018. "Evaluation of delamination crack tip in woven fibre glass reinforced polymer composite using FBG sensor spectra and thermo-elastic response." Measurement. 122, pp. 178-185. https://doi.org/10.1016/j.measurement.2018.03.023
Multiscale modeling for high-performance concrete: a review
Wu, Linmei, Liu, Peng, Zhang, Zuhua, Zhu, DeJu and Wang, Hao. 2018. "Multiscale modeling for high-performance concrete: a review ." International Journal for Multiscale Computational Engineering. 16 (1), pp. 1-17. https://doi.org/10.1615/IntJMultCompEng.2018022827
Implementation of a finite element analysis procedure for structural analysis of shape memory behaviour of fibre reinforced shape memory polymer composites
Al Azzawi, Wessam, Epaarachchi, J. A., Islam, Mainul and Leng, Jinsong. 2017. "Implementation of a finite element analysis procedure for structural analysis of shape memory behaviour of fibre reinforced shape memory polymer composites." Smart Materials and Structures. 26 (12), pp. 1-13. https://doi.org/10.1088/1361-665X/aa928e
A review of extending performance of epoxy resins using carbon nanomaterials
Liu, Shan, Chevali, Venkata S., Xu, Zhiguang, Hui, David and Wang, Hao. 2018. "A review of extending performance of epoxy resins using carbon nanomaterials." Composites Part B: Engineering. 136 (1), pp. 197-214. https://doi.org/10.1016/j.compositesb.2017.08.020
Granular nanostructure: a facile biomimetic strategy for the design of supertough polymeric materials with high ductility and strength
Song, Pingan, Xu, Zhiguang, Dargusch, Matthew, Chen, Zhi-Gang, Wang, Hao and Guo, Qipeng. 2017. "Granular nanostructure: a facile biomimetic strategy for the design of supertough polymeric materials with high ductility and strength." Advanced Materials. 29 (46), pp. 1-7. https://doi.org/10.1002/adma.201704661
Flame retardant and mechanically tough poly(lactic acid) biocomposites via combining ammonia polyphosphate and polyethylene glycol
Sun, Yiqi, Sun, Shuai, Chen, Lei, Liu, Lina, Song, Pingan, Li, Wei, Yu, Youming, Lu, Fengzhu, Qian, Jun and Wang, Hao. 2017. "Flame retardant and mechanically tough poly(lactic acid) biocomposites via combining ammonia polyphosphate and polyethylene glycol." Composites Communications. 6. https://doi.org/10.1016/j.coco.2017.07.005
Quantitative and qualitative analyses of mechanical behavior and dimensional stability of styrene-based shape memory composites
Al Azzawi, Wessam, Islam, Mainul M., Leng, Jinsong, Li, Fengfeng and Epaarachchi, Jayantha A.. 2017. "Quantitative and qualitative analyses of mechanical behavior and dimensional stability of styrene-based shape memory composites." Journal of Intelligent Material Systems and Structures. 28 (20), pp. 3115-3126. https://doi.org/10.1177/1045389X17705210
Super-tough artificial nacre based on graphene oxide via synergistic interface interactions of Pi-Pi stacking and hydrogen bonding
Song, Pingan, Xu, Zhiguang, Wu, Yuanpeng, Cheng, Qunfeng, Guo, Qipeng and Wang, Hao. 2017. "Super-tough artificial nacre based on graphene oxide via synergistic interface interactions of Pi-Pi stacking and hydrogen bonding." Carbon. 111, pp. 807-812. https://doi.org/10.1016/j.carbon.2016.10.067
2D-alumina platelets enhance mechanical and abrasion properties of PA-612 via interfacial hydrogen-bond interactions
Qian, Mengbo, Sun, Yiqi, Xu, Xiaodong, Liu, Lina, Song, Pingan, Yu, Youming, Wang, Hao and Qian, Jun. 2017. "2D-alumina platelets enhance mechanical and abrasion properties of PA-612 via interfacial hydrogen-bond interactions." Chemical Engineering Journal. 308, pp. 760-771. https://doi.org/10.1016/j.cej.2016.09.124
Thermally stable, conductive and flame-retardant nylon 612 composites created by adding two-dimensional alumina platelets
Song, Pingan, Wang, Cong, Chen, Lei, Zheng, Yiqi, Liu, Lina, Wu, Qiang, Huang, Guobo, Yu, Youming and Wang, Hao. 2017. "Thermally stable, conductive and flame-retardant nylon 612 composites created by adding two-dimensional alumina platelets." Composites Part A: Applied Science and Manufacturing. 97, pp. 100-110. https://doi.org/10.1016/j.compositesa.2017.02.029
Preliminary study on the development of syntactic foams for marine applications
Salleh, Z., Islam, M. M. and Ku, H.. 2013. "Preliminary study on the development of syntactic foams for marine applications." Epaarachchi, Jayantha A., Lau, Alan Kin-tak and Leng, Jinsong (ed.) 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013). Gold Coast, Australia 10 - 12 Jul 2013 United States. https://doi.org/10.1117/12.2028279
Glycidyl methacrylate-compatibilized poly(lactic acid)/hemp hurd biocomposites: processing, crystallization, and thermo-mechanical response
Khan, Belas Ahmed, Na, Haining, Chevali, Venkata, Warner, Philip, Zhu, Jin and Wang, Hao. 2018. "Glycidyl methacrylate-compatibilized poly(lactic acid)/hemp hurd biocomposites: processing, crystallization, and thermo-mechanical response." Journal of Materials Science and Technology. 34 (2), pp. 387-397. https://doi.org/10.1016/j.jmst.2017.03.004
Controlled synthesis of silkworm cocoon-like α-Fe2O3 and its adsorptive properties for organic dyes and Cr(VI)
Liu, Hua, Wang, Zumin, Li, Haiyan, Wang, Hao and Yu, Ranbo. 2018. "Controlled synthesis of silkworm cocoon-like α-Fe2O3 and its adsorptive properties for organic dyes and Cr(VI) ." Materials Research Bulletin. 100, pp. 302-307. https://doi.org/10.1016/j.materresbull.2017.12.030
Construction of multi-shelled Bi2WO6 hollow microspheres with enhanced visible light photo-catalytic performance
Qin, Feiyu, Cui, Pengzhen, Hu, Lei, Wang, Zumin, Chen, Jun, Xing, Xianran, Wang, Hao and Yu, Ranbo. 2018. "Construction of multi-shelled Bi2WO6 hollow microspheres with enhanced visible light photo-catalytic performance ." Materials Research Bulletin. 99, pp. 331-335. https://doi.org/10.1016/j.materresbull.2017.11.016
Formation of multi-shelled nickel-based sulfide hollow spheres for rechargeable alkaline batteries
Li, Dongwei, Zhao, Xiaoxian, Yu, Ranbo, Wang, Bao, Wang, Hao and Wang, Dan. 2018. "Formation of multi-shelled nickel-based sulfide hollow spheres for rechargeable alkaline batteries." Inorganic Chemistry Frontiers. 5 (3), pp. 535-540. https://doi.org/10.1039/c7qi00760d
Effect of width–thickness ratio on capacity of pultruded square hollow polymer columns
Xie, Lei, Bai, Yu, Qi, Yujun, Caprani, Colin and Wang, Hao. 2018. "Effect of width–thickness ratio on capacity of pultruded square hollow polymer columns ." Proceedings of the Institution of Civil Engineers: Structures and Buildings. 171 (11), pp. 842-854. https://doi.org/10.1680/jstbu.16.00227
Water exposure, tensile and fatigue properties of treated hemp reinforced vinyl ester composites
Misnon, Mohd Iqbal, Islam, Mainul, Epaarachchi, Jayantha, Affandi, Nor Dalila Nor and Wang, Hao. 2018. "Water exposure, tensile and fatigue properties of treated hemp reinforced vinyl ester composites ." National Symposium on Polymeric Materials 2017 (NSPM 2017). Selangor, Malaysia 21 - 22 Oct 2017 United States . AIP Publishing. https://doi.org/10.1063/1.5047164
Toward an indexing approach to evaluate fly ashes for geopolymer manufacture
Zhang, Zuhua, Provis, John L., Zou, Jin, Reid, Andrew and Wang, Hao. 2016. "Toward an indexing approach to evaluate fly ashes for geopolymer manufacture." Cement and Concrete Research. 85, pp. 163-173. https://doi.org/10.1016/j.cemconres.2016.04.007
Preparation of natural rubber/silica nanocomposites using one- and two-dimensional dispersants by latex blending process
Luo, Yongyue, Qian, Jiangzuo, He, Dongning, Tao, Jinlong, Zhao, Pengfei, Gong, Wei, Zhang, Zuhua, Peng, Zheng, Chen, Xianfei, Wang, Hao and Dan, Yi. 2018. "Preparation of natural rubber/silica nanocomposites using one- and two-dimensional dispersants by latex blending process." Polymer Composites. 39 (5), pp. 1413-1419. https://doi.org/10.1002/pc.24081
Superior flame retardancy of epoxy resin by the combined addition of graphene nanosheets and DOPO
Liu, Shan, Fang, Zhengping, Yan, Hongqiang and Wang, Hao. 2016. "Superior flame retardancy of epoxy resin by the combined addition of graphene nanosheets and DOPO." RSC Advances: an international journal to further the chemical sciences. 6 (7), pp. 5288-5295. https://doi.org/10.1039/c5ra25988f
Advanced composites with natural reinforcement
Low, Jim, Davies, Ian J., Dong, Yu, Ahmed, Shaikh Faiz Uddin, Wang, Hao and Akil, Hazizan Md. 2014. "Advanced composites with natural reinforcement ." Advances in Materials Science and Engineering. 2014, pp. 1-2. https://doi.org/10.1155/2014/376351
Activated carbon derived from bio-waste hemp hurd and retted hemp hurd for CO2 adsorption
Liu, Shan, Ge, Lei, Gao, Shuai, Zhuang, Linzhou, Zhu, Zhonghua and Wang, Hao. 2017. "Activated carbon derived from bio-waste hemp hurd and retted hemp hurd for CO2 adsorption." Composites Communications. 5, pp. 27-30. https://doi.org/10.1016/j.coco.2017.06.002
Use of an elasto-plastic model and strain measurements of embedded fibre Bragg grating sensors to detect Mode I delamination crack propagation in woven cloth (0/90) composite materials
Kakei, Ayad Arab, Islam, Mainul, Leng, Jingsong and Epaarachchi, Jayantha A.. 2018. "Use of an elasto-plastic model and strain measurements of embedded fibre Bragg grating sensors to detect Mode I delamination crack propagation in woven cloth (0/90) composite materials." Structural Health Monitoring: an international journal. 17 (2), pp. 363-378. https://doi.org/10.1177/1475921717694812
Determination of coefficient thermal expansion of glass microballoon/vinyl ester syntactic foams
Salleh, Zulzamri, Islam, Md Mainul and Epaarachchi, Jayantha Ananda. 2016. "Determination of coefficient thermal expansion of glass microballoon/vinyl ester syntactic foams." 3rd Advanced Materials Conference (AMC 2016): Advanced Materials for Sustainability and Growth. Langkawi, Malaysia 28 - 29 Nov 2016 Malaysia. AIP Publishing. https://doi.org/10.1063/1.5010477
Thermogravimetry analysis on fused borosilicate syntactic foams
Salleh, Zulzamri, Islam, Md Mainul and Epaarachchi, Jayantha Ananda. 2017. "Thermogravimetry analysis on fused borosilicate syntactic foams." 3rd Advanced Materials Conference (AMC 2016): Advanced Materials for Sustainability and Growth. Langkawi, Malaysia 28 - 29 Nov 2016 Kulim, Kedah, Malaysia. AIP Publishing. https://doi.org/10.1063/1.5010542
Analysis of stress concentration factor for tensile characteristics of syntactic foam using finite element method
Salleh, Zulzamri, Islam, Md Mainul and Epaarachchi, Jayantha Ananda. 2017. "Analysis of stress concentration factor for tensile characteristics of syntactic foam using finite element method." Journal of Research Updates in Polymer Science. 6 (1), pp. 21-32. https://doi.org/10.6000/1929-5995.2017.06.01.4
Autogenous shrinkage of high performance concrete: a review
Wu, Linmei, Farzadnia, Nima, Shi, Caijun, Zhang, Zuhua and Wang, Hao. 2017. "Autogenous shrinkage of high performance concrete: a review." Construction and Building Materials. 149, pp. 62-75. https://doi.org/10.1016/j.conbuildmat.2017.05.064
Vinyl ester/glass microballoon syntactic foams with low density
Salleh, Zulzamri, Islam, Md Mainul, Epaarachchi, Jayantha Ananda and Su, Haibin. 2017. "Vinyl ester/glass microballoon syntactic foams with low density." International Research Journal of Materials Sciences and Applications. 2017 (1), pp. 1-25.
Effect of degumming on tussah silk fibre
Ho, M. P., Lau, K. T. and Wang, H.. 2011. "Effect of degumming on tussah silk fibre." Lee, Woo (ed.) 18th International Conference on Composite Materials (ICCM-18). Jeju, Korea 21 - 26 Aug 2011 Seoul, Korea.
Identification of distortions to FBG spectrum using FBG fixed filters
Kahandawa, G. C., Epaarachchi, J. A. and Wang, H.. 2011. "Identification of distortions to FBG spectrum using FBG fixed filters." Lee, Woo (ed.) 18th International Conference on Composite Materials (ICCM-18). Jeju, Korea 21 - 26 Aug 2011 Korea.
Mechanical properties of activated carbon (AC) coconut shell reinforced polypropylene composites encapsulated with epoxy resin
Salleh, Z., Islam, M. M., Yusop, M. Y. M. and Idrus, M. A. Munaim M.. 2014. "Mechanical properties of activated carbon (AC) coconut shell reinforced polypropylene composites encapsulated with epoxy resin." Xuan, Li (ed.) 5th International Conference on Chemical, Biological and Environmental Engineering (ICBEE 2013). New Delhi, India 14 - 15 Sep 2013 United States. https://doi.org/10.1016/j.apcbee.2014.01.017
Synthesis and characterization of novel soybean-oil-based elastomers with favorable processability and tunable properties
Wang, Zhao, Zhang, Xing, Wang, Runguo, Kang, Hailan, Qiao, Bo, Ma, Jun, Zhang, Liqun and Wang, Hao. 2012. "Synthesis and characterization of novel soybean-oil-based elastomers with favorable processability and tunable properties." Macromolecules. 45 (22), pp. 9010-9019. https://doi.org/10.1021/ma301938a
Tensile behaviours of activated carbon (AC) coconut shell reinforced recycle polyethylene (PET) hybrid composites
Salleh, Zulzamri, Islam, Md Mainul, Yusop, M. Y. M. and Muhamad, M. S.. 2013. "Tensile behaviours of activated carbon (AC) coconut shell reinforced recycle polyethylene (PET) hybrid composites." 12th International Conference on Frontiers of Polymers and Advanced Materials (ICFPAM 2013). Auckland, New Zealand 08 - 13 Dec 2013
Cure shrinkage in epoxy grouts for grouted repairs
Shamsuddoha, Md, Islam, Md Mainul, Aravinthan, Thiru, Manalo, Allan and Lau, Kin-tak. 2013. "Cure shrinkage in epoxy grouts for grouted repairs." Epaarachchi, Jayantha A., Lau, Alan Kin-tak and Leng, Jinsong (ed.) 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013). Gold Coast, Australia 10 - 12 Jul 2013 United States. https://doi.org/10.1117/12.2028085
Selection of hemp fabric as reinforcement in composite materials
Misnon, Mohd Iqbal, Islam, Md Mainul, Epaarachchi, Jayantha Ananda and Lau, Kin-tak. 2014. "Selection of hemp fabric as reinforcement in composite materials." Mashud, Mohammad (ed.) 3rd International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE 2014). Khulna, Bangladesh 26 - 27 Dec 2014 Khulna, Bangladesh.
Compressive properties of ceramic microballoon syntactic foams
Salleh, Zulzamri, Islam, Md Mainul and Epaarachchi, Jayantha Ananda. 2014. "Compressive properties of ceramic microballoon syntactic foams." Mashud, Mohammad (ed.) 3rd International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE 2014). Khulna, Bangladesh 26 - 27 Dec 2014 Khulna, Bangladesh.
Compressive, tensile and thermal properties of epoxy grouts subjected to underwater conditioning at elevated temperature
Shamsuddoha, M., Islam, M. M., Aravinthan, T., Manalo, A. and Djukic, L. P.. 2014. "Compressive, tensile and thermal properties of epoxy grouts subjected to underwater conditioning at elevated temperature." Smith, Scott T. (ed.) 23rd Australasian Conference on the Mechanics of Structures and Materials (ACMSM23). Byron Bay, Australia 09 - 12 Dec 2014 Lismore, Australia.
Development of fracture and damage modeling concepts for composite materials
Kakei, Ayad Arab Ghaidan, Epaarachchi, Jayantha Ananda, Islam, M. Mainul and Leng, Jinsong. 2016. "Development of fracture and damage modeling concepts for composite materials." Epaarachchi, Jayantha Ananda and Kahandawa, Gayan Chanaka (ed.) Structural health monitoring technologies and next-generation smart composite structures. Roca Raton, USA. CRC Press. pp. 341-368
Inorganic polymer foams: transform from non-structural to structural upon fire
Zhang, Zuhua, Yang, Tao, Wang, Hao and Yao, Xiao. 2013. "Inorganic polymer foams: transform from non-structural to structural upon fire." Epaarachchi, Jayantha A., Lau, Alan Kin-tak and Leng, Jinsong (ed.) 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013). Gold Coast, Australia 10 - 12 Jul 2013 Bellingham, WA. United States. https://doi.org/10.1117/12.2027739
Integration of textile fabric and coconut shell in particleboard
Misnon, M. I., Bahari, S. A., Islam, M. M. and Epaarachchi, J. A.. 2013. "Integration of textile fabric and coconut shell in particleboard ." Epaarachchi, Jayantha A., Lau, Alan Kin-tak and Leng, Jinsong (ed.) 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013). Gold Coast, Australia 10 - 12 Jul 2013 United States. https://doi.org/10.1117/12.2027836
Effect of hygrothermal conditioning on the mechanical and thermal properties of epoxy grouts for offshore pipeline rehabilitation
Shamsuddoha, Md, Islam, Md Mainul, Aravinthan, Thiru, Manalo, Allan and Djukic, Luke P.. 2016. "Effect of hygrothermal conditioning on the mechanical and thermal properties of epoxy grouts for offshore pipeline rehabilitation." AIMS Material Science. 3 (3), pp. 832-850. https://doi.org/10.3934/matersci.2016.3.832
Novel self-supporting zeolitic block with tunable porosity and crystallinity for water treatment
Zhang, Zuhua, Li, Liangfeng, He, Dongning, Ma, Xue, Yan, Chunjie and Wang, Hao. 2016. "Novel self-supporting zeolitic block with tunable porosity and crystallinity for water treatment." Materials Letters. 178, pp. 151-154. https://doi.org/10.1016/j.matlet.2016.04.214
A dynamic tester to evaluate the thermal and moisture behaviour of the surface of textiles
Li, Wenbin, Xu, Weilin, Wang, Hao and Wang, Xin. 2016. "A dynamic tester to evaluate the thermal and moisture behaviour of the surface of textiles." Journal of Thermal Biology. 55, pp. 14-19. https://doi.org/10.1016/j.jtherbio.2015.11.005
Compositional, microstructural and mechanical properties of ambient condition cured alkali-activated cement
Zhang, Zuhua, Li, Liangfeng, Ma, Xue and Wang, Hao. 2016. "Compositional, microstructural and mechanical properties of ambient condition cured alkali-activated cement." Construction and Building Materials. 113, pp. 237-245. https://doi.org/10.1016/j.conbuildmat.2016.03.043
Synthesis of an intrinsically flame retardant bio-based benzoxazine resin
Yan, Hongquiang, Sun, Chuang, Fang, Zhengping, Liu, Xiaoqing, Zhu, Jin and Wang, Hao. 2016. "Synthesis of an intrinsically flame retardant bio-based benzoxazine resin." Polymer. 97, pp. 418-427. https://doi.org/10.1016/j.polymer.2016.05.053
The pore characteristics of geopolymer foam concrete and their impact on the compressive strength and modulus
Zhang, Zuhua and Wang, Hao. 2016. "The pore characteristics of geopolymer foam concrete and their impact on the compressive strength and modulus." Frontiers in Materials. 3, pp. 1-11. https://doi.org/10.3389/fmats.2016.00038
Fly ash-based geopolymer: clean production, properties and applications
Zhuang, Xiao Yu, Chen, Liang, Komarneni, Sridhar, Zhou, Chun Hui, Tong, Dong Shen, Yang, Hui Min, Yu, Wei Hua and Wang, Hao. 2016. "Fly ash-based geopolymer: clean production, properties and applications." Journal of Cleaner Production. 125, pp. 253-267. https://doi.org/10.1016/j.jclepro.2016.03.019
Conversion of local industrial wastes into greener cement through geopolymer technology: a case study of high-magnesium nickel slag
Zhang, Zuhua, Zhu, Yingcan, Yang, Tao, Li, Liangfeng, Zhu, Huajun and Wang, Hao. 2017. "Conversion of local industrial wastes into greener cement through geopolymer technology: a case study of high-magnesium nickel slag." Journal of Cleaner Production. 141, pp. 463-471. https://doi.org/10.1016/j.jclepro.2016.09.147
Microstructure and properties of Mg-Nd-Zn-Zr alloys
Wang, H., Ning, Z. L., Liang, W. Z., Cao, F. Y. and Sun, J. F.. 2010. "Microstructure and properties of Mg-Nd-Zn-Zr alloys." 2009 International Conference and Exhibition on Materials and AustCeram (MA 2009). Gold Coast, Australia 01 - 03 Jul 2009 Melbourne, Australia.
Hemp hurd based carbon template for reaction formed silicon carbide ceramic
Yan, Z. L., Ma, T., Zhang, J. C., Zhang, H. and Wang, H.. 2013. "Hemp hurd based carbon template for reaction formed silicon carbide ceramic." Hoa, Suong Van and Hubert, Pascal (ed.) 19th International Conference on Composite Materials (ICCM-19). Montreal, Canada 28 Jul - 02 Aug 2013 Canada.
Mechanical properties of sandwich composite made of syntactic foam core and GFRP skins
Salleh, Zulzamri, Islam, Md Mainul, Epaarachchi, Jayantha Ananda and Su, Haibin. 2016. "Mechanical properties of sandwich composite made of syntactic foam core and GFRP skins." AIMS Material Science. 3 (4), pp. 1704-1727. https://doi.org/10.3934/matersci.2016.4.1704
Analysis of stress concentration factor around the hole of syntactic foam tensile specimens
Salleh, Z., Islam, M. M. and Epaarachchi, J. A.. 2016. "Analysis of stress concentration factor around the hole of syntactic foam tensile specimens." International Journal of Advances in Science, Engineering and Technology (IJASEAT). 4 (3), pp. 102-106.
Woven hemp fabric reinforced vinyl ester composite: effect of water absorption on the mechanical properties degradation
Misnon, Mohd Iqbal, Islam, Md Mainul, Epaarachchi, Jayantha Ananda, Wang, Hao and Lau, Kin-tak. 2016. "Woven hemp fabric reinforced vinyl ester composite: effect of water absorption on the mechanical properties degradation." International Journal of Advances in Science, Engineering and Technology (IJASEAT). 4 (3), pp. 96-101.
Woven hemp fabric reinforced vinyl ester composite treated with fire retardant
Misnon, Mohd Iqbal, Islam, Md Mainul, Epaarachchi, Jayantha Ananda, Chen, Haizhen and Wang, Hao. 2016. "Woven hemp fabric reinforced vinyl ester composite treated with fire retardant." International Journal of Advances in Science, Engineering and Technology (IJASEAT). 4 (3), pp. 90-95.
Geopolymer from Kaolin in China: an overview
Zhang, Z. H., Zhu, H. J., Zhou, C. H. and Wang, H.. 2016. "Geopolymer from Kaolin in China: an overview." Applied Clay Science. 119 (1), pp. 31-41. https://doi.org/10.1016/j.clay.2015.04.023
Green Composite Materials
Wang, Hao, Schubel, Peter, Yi, Xiaosu, Zhu, Jin, Ulven, Chad and Qiu, Yiping. 2015. "Green Composite Materials." Advances in Materials Science and Engineering. 2015. https://doi.org/10.1155/2015/487416
Shape memory polymers and their applications
Al Azzawi, W. S., Epaarachchi, Jayantha Ananda, Islam, M. Mainul and Leng, Jinsong. 2016. "Shape memory polymers and their applications." Epaarachchi, Jayantha Ananda and Kahandawa, Gayan Chanaka (ed.) Structural health monitoring technologies and next-generation smart composite structures. Boca Raton, Florida. CRC Press. pp. 447-478
Synergistic flame retardancy effect of graphene nanosheets and traditional retardants on epoxy resin
Liu, Shan, Fang, Zhengping, Yan, Hongqiang, Chevali, Venkata S. and Wang, Hao. 2016. "Synergistic flame retardancy effect of graphene nanosheets and traditional retardants on epoxy resin." Composites Part A: Applied Science and Manufacturing. 89, pp. 26-32. https://doi.org/10.1016/j.compositesa.2016.03.012
Processing and properties of antibacterial silver nanoparticle-loaded hemp hurd/poly(lactic acid) biocomposites
Khan, Belas A., Chevali, Venkata S., Na, Haining, Zhu, Jin, Warner, Philip and Wang, Hao. 2016. "Processing and properties of antibacterial silver nanoparticle-loaded hemp hurd/poly(lactic acid) biocomposites." Composites Part B: Engineering. 100, pp. 10-18. https://doi.org/10.1016/j.compositesb.2016.06.022
Detection and characterisation of delamination damage propagation in woven glass fibre reinforced polymer composite using thermoelastic response mapping
Kakei, Ayad, Epaarachchi, J. A., Islam, Mainul, Leng, J. and Rajic, N.. 2016. "Detection and characterisation of delamination damage propagation in woven glass fibre reinforced polymer composite using thermoelastic response mapping." Composite Structures. 153, pp. 442-450. https://doi.org/10.1016/j.compstruct.2016.06.044
Improving the quality of experimental research in civil engineering by employing statistical design of experiment: a case study in developing composite hybrid sandwich panel
Fajrin, Jauhar, Zhuge, Yan, Bullen, Frank and Wang, Hao. 2015. "Improving the quality of experimental research in civil engineering by employing statistical design of experiment: a case study in developing composite hybrid sandwich panel." Zulkifli, Fitri Yuli and Suwartha, Nyoman (ed.) 14th International conference on QIR (Quality in Research). Lombok, Indonesia 10 - 13 Aug 2015 Lombok, Indonesia.
Mechanical properties of low density glass microballoon/vinyl ester syntactic foam for marine application
Salleh, Zulzamri, Islam, Md Mainul and Epaarachchi, Jayantha Ananda. 2015. "Mechanical properties of low density glass microballoon/vinyl ester syntactic foam for marine application." 12th Composites Australia and CRC-ACS Conference 2015: Game On! Winning with Composites. Gold Coast, Australia 21 - 23 Apr 2015
On the flameproof treatment of ramie fabrics using a spray-assisted layer-by-layer technique
Zhao, Li, Yan, Hongqiang, Fang, Zhengping, Wang, Jing and Wang, Hao. 2015. "On the flameproof treatment of ramie fabrics using a spray-assisted layer-by-layer technique." Polymer Degradation and Stability. 121, pp. 11-17. https://doi.org/10.1016/j.polymdegradstab.2015.08.007
Recent advances in clay mineral-containing nanocomposite hydrogels
Zhao, Li Zhi, Zhou, Chun Hui, Wang, Jing, Tong, Dong Shen, Yu, Wei Hua and Wang, Hao. 2015. "Recent advances in clay mineral-containing nanocomposite hydrogels." Soft Matter. 11 (48), pp. 9229-9246. https://doi.org/10.1039/c5sm01277e
Mechanical, thermal insulation, thermal resistance and acoustic absorption properties of geopolymer foam concrete
Zhang, Zuhua, Provis, John L., Reid, Andrew and Wang, Hao. 2015. "Mechanical, thermal insulation, thermal resistance and acoustic absorption properties of geopolymer foam concrete." Cement and Concrete Composites. 62, pp. 97-105. https://doi.org/10.1016/j.cemconcomp.2015.03.013
Compressive behaviour of low density polymeric syntactic foams
Salleh, Zulzamri, Islam, Md Mainul and Epaarachchi, Jayantha Ananda. 2015. "Compressive behaviour of low density polymeric syntactic foams." Applied Mechanics and Materials. 799-800, pp. 135-139. https://doi.org/10.4028/www.scientific.net/AMM.799-800.135
Effect of iron acetylacetonate on the crosslink structure, thermal and flammability properties of novel aromatic diamine-based benzoxazines containing cyano group
Yan, Hongqiang, Wang, Huaqing, Cheng, Jie, Fang, Zhengping and Wang, Hao. 2015. "Effect of iron acetylacetonate on the crosslink structure, thermal and flammability properties of novel aromatic diamine-based benzoxazines containing cyano group." RSC Advances: an international journal to further the chemical sciences. 5 (24), pp. 18538-18545. https://doi.org/10.1039/c4ra15035j
Analyses of woven hemp fabric characteristics for composite reinforcement
Misnon, M. I., Islam, M. M., Epaarachchi, J. A. and Lau, K. T.. 2015. "Analyses of woven hemp fabric characteristics for composite reinforcement." Materials and Design. 66 (A), pp. 82-92. https://doi.org/10.1016/j.matdes.2014.10.037
Effects of rare earth La on microstructure and properties of Ag-21Cu-25Sn alloy ribbon prepared by melt spinning
Ma, Xue, Li, Liangfeng, Zhang, Zuhua, Wang, Hao, Wang, Enze and Qiu, Tai. 2015. "Effects of rare earth La on microstructure and properties of Ag-21Cu-25Sn alloy ribbon prepared by melt spinning ." Materials and Design. 83, pp. 1-5. https://doi.org/10.1016/j.matdes.2015.05.083
Flame retarding and reinforcing modification of ramie/polybenzoxazine composites by surface treatment of ramie fabric
Li, Nannan, Yan, Hongqiang, Xia, Lei, Mao, Lebo, Fang, Zhengping, Song, Yihu and Wang, Hao. 2015. "Flame retarding and reinforcing modification of ramie/polybenzoxazine composites by surface treatment of ramie fabric." Composites Science and Technology. 121, pp. 82-88. https://doi.org/10.1016/j.compscitech.2015.07.013
Ground hemp fibers as filler/reinforcement for thermoplastic biocomposites
Etaati, Amir, Pather, Selvan, Rahman, Moloud and Wang, Hao. 2015. "Ground hemp fibers as filler/reinforcement for thermoplastic biocomposites." Advances in Materials Science and Engineering. 2015. https://doi.org/10.1155/2015/513590
Research difference of strain distribution and microstructure evolution between rolling direction and transverse direction of AM50 Mg alloy plate by digital image correlation
Li, Qiang, Hua, Fuan, Li, Jianping and Wang, Hao. 2015. "Research difference of strain distribution and microstructure evolution between rolling direction and transverse direction of AM50 Mg alloy plate by digital image correlation ." Advances in Materials Science and Engineering. 2015. https://doi.org/10.1155/2015/175873
Formation of defects in the graphite oxidization process: a positron study
Gong, Wei, He, Dongning, Tao, Jinlong, Zhao, Pengfei, Kong, Lingxue, Luo, Yongyue, Peng, Zheng and Wang, Hao. 2015. "Formation of defects in the graphite oxidization process: a positron study." RSC Advances: an international journal to further the chemical sciences. 5 (108), pp. 88908-88914. https://doi.org/10.1039/c5ra14660g
Improvement on the properties of polylactic acid (PLA) using bamboo charcoal particles
Ho, Mei-po, Lau, Kin-tak, Wang, Hao and Hui, David. 2015. "Improvement on the properties of polylactic acid (PLA) using bamboo charcoal particles." Composites Part B: Engineering. 81, pp. 14-25. https://doi.org/10.1016/j.compositesb.2015.05.048
Alkali-activated cements for protective coating of OPC concrete
Zhang, Z. and Wang, H.. 2015. "Alkali-activated cements for protective coating of OPC concrete." Pacheco-Torgal, Fernando, Labrincha, Joao, Leonelli, C., Palomo, A. and Chindaprasirt, P. (ed.) Handbook of alkali-activated cements, mortars and concretes. Cambridge, United Kingdom. Woodhead Publishing Limited. pp. 605-626
Analysing the relation between pore structure and permeability of alkali-activated concrete binders
Zhang, Z. and Wang, H.. 2015. "Analysing the relation between pore structure and permeability of alkali-activated concrete binders." Pacheco-Torgal, Fernando, Labrincha, Joao, Leonelli, C., Palomo, A. and Chindaprasirt, P. (ed.) Handbook of alkali-activated cements, mortars and concretes. Cambridge, United Kingdom. Woodhead Publishing Limited. pp. 235-264
Flame-retardant coating by alternate assembly of poly(vinylphosphonic acid) and polyethylenimine for ramie fabrics
Wang, Li-li, Zhang, Tao, Yan, Hong-quiang, Peng, Mao, Fang, Zheng-ping, Li, Yan and Wang, Hao. 2014. "Flame-retardant coating by alternate assembly of poly(vinylphosphonic acid) and polyethylenimine for ramie fabrics." Chinese Journal of Polymer Science. 32 (3), pp. 305-314. https://doi.org/10.1007/s10118-014-1408-y
Antibacterial properties of hemp and other natural fibre plants: a review
Khan, Belas Ahmed, Warner, Philip and Wang, Hao. 2014. "Antibacterial properties of hemp and other natural fibre plants: a review." BioResources. 9 (2), pp. 3642-3659.
Antibacterial properties of hemp hurd powder against E. coli
Khan, Belas Ahmed, Wang, Jing, Warner, Philip and Wang, Hao. 2015. "Antibacterial properties of hemp hurd powder against E. coli." Journal of Applied Polymer Science. 132 (10), pp. 41588/1-41588/6. https://doi.org/10.1002/app.41588
A fundamental approach to design and develop fly ash based geopolymers
Wang, Hao and Zhang, Zuhua. 2014. "A fundamental approach to design and develop fly ash based geopolymers." Shi, Caijun and Shen, Xiaodong (ed.) 2nd International Conference on Advances in Chemically Activated Materials (CAM 2014). Changsha, China 01 - 03 Jun 2014 Bagneux, France.
The importance of fly ash property in the manufacture of geopolymers
Zhang, Zuhua, Zhu, Yingcan, Reid, Andrew and Wang, Hao. 2014. "The importance of fly ash property in the manufacture of geopolymers." Shi, Caijun and Shen, Xiaodong (ed.) 2nd International Conference on Advances in Chemically Activated Materials (CAM 2014). Changsha, China 01 - 03 Jun 2014 Bagneux, France.
Hemp reinforced composites with alkalization and acetylation fibre treatments
Wang, H., Kabir, M. M. and Lau, K. T.. 2014. "Hemp reinforced composites with alkalization and acetylation fibre treatments." Polymers and Polymer Composites. 22 (3), pp. 247-252. https://doi.org/10.1177/096739111402200
Effect of surface modifications on the thermal and moisture behavior of wool fabric
Wang, Xin, Zhao, Yuan, Li, Wenbin and Wang, Hao. 2015. "Effect of surface modifications on the thermal and moisture behavior of wool fabric." Applied Surface Science. 342, pp. 101-105. https://doi.org/10.1016/j.apsusc.2015.03.027
Injection molded noil hemp fiber composites: interfacial shear strength, fiber strength, and aspect ratio
Etaati, Amir, Pather, Selvan, Cardona, Francisco and Wang, Hao. 2016. "Injection molded noil hemp fiber composites: interfacial shear strength, fiber strength, and aspect ratio." Polymer Composites. 37 (1), pp. 213-220. https://doi.org/10.1002/pc.23172
Characterisation of the mechanical properties of pultruded fibre-reinforced polymer tube
Guades, Ernesto, Aravinthan, Thiru and Islam, Md Mainul. 2014. "Characterisation of the mechanical properties of pultruded fibre-reinforced polymer tube." Materials and Design. 63, pp. 305-315. https://doi.org/10.1016/j.matdes.2014.06.018
Study on the surface temperature of fabric in the process of dynamic moisture liberation
Wang, Xin, Li, Wenbin, Xu, Weilin and Wang, Hao. 2014. "Study on the surface temperature of fabric in the process of dynamic moisture liberation." Fibers and Polymers. 15 (11), pp. 2437-2440. https://doi.org/10.1007/s12221-014-2437-4
Effects of indium addition on properties and wettability of Sn–0.7Cu–0.2Ni lead-free solders
Li, L. F., Cheng, Y. K., Xu, G. L., Wang, E. Z., Zhang, Z. H. and Wang, H.. 2014. "Effects of indium addition on properties and wettability of Sn–0.7Cu–0.2Ni lead-free solders." Materials and Design. 64, pp. 15-20. https://doi.org/10.1016/j.matdes.2014.07.035
Effects of acid treatments on bamboo cellulose nanocrystals
Zhang, Pengpeng, Tong, Dongshen, Lin, Chunxiang, Yang, Huimin, Zhong, Zheke, Yu, Wei Hua, Wang, Hao and Zhou, Chunhui. 2014. "Effects of acid treatments on bamboo cellulose nanocrystals." Asia Pacific Journal of Chemical Engineering. 9 (5), pp. 686-695. https://doi.org/10.1002/apj.1812
Clean production of CTAB-montmorillonite: formation mechanism and swelling behavior in xylene
Yu, Wei Hua, Ren, Qian Qian, Tong, Dong Shen, Zhou, Chun Hui and Wang, Hao. 2014. "Clean production of CTAB-montmorillonite: formation mechanism and swelling behavior in xylene ." Applied Clay Science. 97-98, pp. 222-234. https://doi.org/10.1016/j.clay.2014.06.007
Signal monitoring system for monitoring strain applied to a composite component
Kahandawa Appuhamillage, Gayan Chanaka, Epaarachchi, Jayantha and Wang, Hao. 2015. Signal monitoring system for monitoring strain applied to a composite component. US Patent No. 9063032 B2/23rd June 2015
Bio-corrosion of a magnesium alloy with different processing histories
Wang, H., Estrin, Y. and Zuberova, Z.. 2008. "Bio-corrosion of a magnesium alloy with different processing histories." Materials Letters. 62 (16), pp. 2476-2479. https://doi.org/10.1016/j.matlet.2007.12.052
Potentiality of utilising natural textile materials for engineering composites applications
Misnon, Mohd Iqbal, Islam, Md Mainul, Epaarachchi, Jayantha Ananda and Lau, Kin-tak. 2014. "Potentiality of utilising natural textile materials for engineering composites applications." Materials and Design. 59, pp. 359-368. https://doi.org/10.1016/j.matdes.2014.03.022
Controlled nucleation method: a new process for semisolid metal forming
Wang, Hao. 2005. "Controlled nucleation method: a new process for semisolid metal forming." Special Casting and Non-ferrous Alloys (Tezhong Zhuzao Ji Youse Hejin) .
Fly ash-based geopolymers: the relationship between composition, pore structure and efflorescence
Zhang, Zuhua, Provis, John L., Reid, Andrew and Wang, Hao. 2014. "Fly ash-based geopolymers: the relationship between composition, pore structure and efflorescence." Cement and Concrete Research. 64, pp. 30-41. https://doi.org/10.1016/j.cemconres.2014.06.004
Thermochemistry study of the effect of alkali content on the early geopolymerisation at room temperature
Zhang, Z., Yao, X. and Wang, H.. 2010. "Thermochemistry study of the effect of alkali content on the early geopolymerisation at room temperature." Shi, Caijun and Shen, Xiadong (ed.) 1st International Conference on Advances in Chemically-Activated Materials (CAM 2010). Jinan, China 09 - 12 May 2010 Bagneux, France.
Using fly ash to partially substitute metakaolin in geopolymer synthesis
Zhang, Zuhua, Wang, Hao, Zhu, Yingcan, Reid, Andrew, Provis, John L. and Bullen, Frank. 2014. "Using fly ash to partially substitute metakaolin in geopolymer synthesis." Applied Clay Science. 88-89, pp. 194-201. https://doi.org/10.1016/j.clay.2013.12.025
Geopolymer foam concrete: an emerging material for sustainable construction
Zhang, Zuhua, Provis, John L., Reid, Andrew and Wang, Hao. 2014. "Geopolymer foam concrete: an emerging material for sustainable construction." Construction and Building Materials. 56, pp. 113-127. https://doi.org/10.1016/j.conbuildmat.2014.01.081
Chemical treatments on hemp fibre composites
Wang, Hao, Kabir, Mazed and Lau, K. T.. 2013. "Chemical treatments on hemp fibre composites." Wang, Xungai (ed.) Fiber Society Spring 2013 Technical Conference (FS 2013): Advancing Scientific Knowledge Pertaining to Fibers and Fibrous Materials. Geelong, Australia 22 - 24 May 2013 Raleigh, NC. United States.
Fourier transform infrared spectroscopy analysis for hydrothermal transformation of microcrystalline cellulose on montmorillonite
Wu, Lin Mei, Tong, Dong Shen, Zhao, Li Zhi, Yu, Wei Hua, Zhou, Chun Hui and Wang, Hao. 2014. "Fourier transform infrared spectroscopy analysis for hydrothermal transformation of microcrystalline cellulose on montmorillonite." Applied Clay Science. 95, pp. 74-82. https://doi.org/10.1016/j.clay.2014.03.014
Novel hydrothermal carbonization of cellulose catalyzed by montmorillonite to produce kerogen-like hydrochar
Wu, Lin Mei, Zhou, Chun Hui, Tong, Dong Shen, Yu, Wei Hua and Wang, Hao. 2014. "Novel hydrothermal carbonization of cellulose catalyzed by montmorillonite to produce kerogen-like hydrochar ." Cellulose. 21 (4), pp. 2845-2857. https://doi.org/10.1007/s10570-014-0323-2
Hemp and hemp-based composites
Wang, Hao and Lau, Alan K.T.. 2013. "Hemp and hemp-based composites." Thakur, Vijay Kumar (ed.) Green composites from natural resources. Boca Raton, FL. United States. CRC Press. pp. 63-94
Effect of in-situ TiC particles on hot deformation behavior of spray formed 7075 Al alloy
Liu, Hui-min, Li, Zhi-peng and Wang, Hao. 2013. "Effect of in-situ TiC particles on hot deformation behavior of spray formed 7075 Al alloy." Transactions of Materials and Heat Treatment (Cailiao Rechuli Xuebao). 34 (S2), pp. 173-178.
Effect of graphene nanosheets and layered double hydroxides on the flame retardancy and thermal degradation of epoxy resin
Liu, Shan, Yan, Hongqiang, Fang, Zhengping, Guo, Zhenghong and Wang, Hao. 2014. "Effect of graphene nanosheets and layered double hydroxides on the flame retardancy and thermal degradation of epoxy resin." RSC Advances: an international journal to further the chemical sciences. 4 (36), pp. 18652-18659. https://doi.org/10.1039/c4ra01267d
Efflorescence: a critical challenge for geopolymer applications?
Zhang, Zuhua, Wang, Hao, Provis, John L. and Reid, Andrew. 2013. "Efflorescence: a critical challenge for geopolymer applications?" Dao, Vinh and Dux, Peter (ed.) Concrete Institute of Australia's Biennial National Conference (Concrete 2013): Understanding Concrete. Gold Coast, Australia 16 - 18 Oct 2013 Sydney, Australia.
The study of fibre/matrix bond strength in short hemp polypropylene composites from dynamic mechanical analysis
Etaati, Amir, Pather, Selvan, Fang, Zhengping and Wang, Hao. 2014. "The study of fibre/matrix bond strength in short hemp polypropylene composites from dynamic mechanical analysis." Composites Part B: Engineering. 62, pp. 19-28. https://doi.org/10.1016/j.compositesb.2014.02.011
Durability of fly ash based-geopolymers: effect of crystallization on mechanical properties
Zhang, Zuhua, Wang, Hao, Provis, John L., Reid, Andrew and Li, Qiang. 2013. "Durability of fly ash based-geopolymers: effect of crystallization on mechanical properties." Wensheng, Zhang (ed.) 8th International Symposium on Cement and Concrete (ISCC 2013). Nanjing, China 20 - 23 Sep 2013 Beijing, China.
Mechanical and thermal properties of jute fibre reinforced composites
Kabir, Mohammad Mazedul, Islam, Md Mainul and Wang, Hao. 2013. "Mechanical and thermal properties of jute fibre reinforced composites." Journal of Multifunctional Composites. 1 (1), pp. 71-77. https://doi.org/10.12783/issn.2168-4286/1.1/Islam
Vibration damping characteristics of short hemp fibre thermoplastic composites
Etaati, Amir, Mehdizadeh, Saman Abdanan, Wang, Hao and Pather, Selvan. 2014. "Vibration damping characteristics of short hemp fibre thermoplastic composites." Journal of Reinforced Plastics and Composites. 33 (4), pp. 330-341. https://doi.org/10.1177/0731684413512228
Hybrid sandwich panel with natural fibre composite intermediate layer: manufacturing process and significance analysis
Fajrin, Jauhar, Zhuge, Yan, Bullen, Frank and Wang, Hao. 2013. "Hybrid sandwich panel with natural fibre composite intermediate layer: manufacturing process and significance analysis." Malaysian Journal of Civil Engineering. 25 (Special issue 1), pp. 95-111.
Significance analysis of flexural behaviour of hybrid sandwich panels
Fajrin, Jauhar, Zhuge, Yan, Bullen, Frank and Wang, Hao. 2013. "Significance analysis of flexural behaviour of hybrid sandwich panels." Open Journal of Civil Engineering. 3 (3B), pp. 1-7. https://doi.org/10.4236/ojce.2013.33B001
Effectiveness of using fibre-reinforced polymer composites for underwater steel pipeline repairs
Shamsuddoha, Md, Islam, Md Mainul, Aravinthan, Thiru, Manalo, Allan and Lau, Kin-tak. 2013. "Effectiveness of using fibre-reinforced polymer composites for underwater steel pipeline repairs." Composite Structures. 100, pp. 40-54. https://doi.org/10.1016/j.compstruct.2012.12.019
Prediction of obsolete FBG sensor using ANN for efficient and robust operation of SHM systems
Kahandawa, Gayan C., Epaarachchi, Jayantha A., Wang, Hao and Lau, K. T.. 2013. "Prediction of obsolete FBG sensor using ANN for efficient and robust operation of SHM systems." 4th Asia-Pacific Workshop on Structural Health Monitoring (APWSHM 2012). Melbourne, Australia 05 - 07 Dec 2012 Zurich, Switzerland. https://doi.org/10.4028/www.scientific.net/KEM.558.546
Smart structure for small wind turbine blade
Supeni, E. E., Epaarachchi, J. A., Islam, M. M. and Lau, K. T.. 2013. "Smart structure for small wind turbine blade." Epaarachchi, Jayantha A., Lau, Alan Kin-tak and Leng, Jinsong (ed.) 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013). Gold Coast, Australia 10 - 12 Jul 2013 United States. https://doi.org/10.1117/12.2027725
Mechanical properties of epoxy grouts for structural repair
Shamsuddoha, M., Islam, M. M., Aravinthan, T., Manalo, A. C. and Lau, K. T.. 2013. "Mechanical properties of epoxy grouts for structural repair." Samali, Bijan, Attard, Mario M. and Song, Chongmin (ed.) 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM22). Sydney, Australia 11 - 14 Dec 2012 London, United Kingdom.
Effect of coarse filler on shrinkages and dynamic mechanical properties of epoxy grouts
Shamsuddoha, Md, Islam, Md Mainul, Aravinthan, Thiru, Manalo, Allan and Lau, Kin-Tak. 2014. "Effect of coarse filler on shrinkages and dynamic mechanical properties of epoxy grouts." Journal of Multifunctional Composites. 2 (1), pp. 61-66. https://doi.org/10.12783/issn.2168-4286/2.1/
Sustainable composites
Yousif, Belal F., Islam, Md Mainul and Salit, Mohd Sapuan. 2013. "Sustainable composites." Advances in Materials Science and Engineering. https://doi.org/10.1155/2013/142718
Confinement of C60 nanoparticles on the dynamics of polystyrene studied by anelastic spectroscopy and rheometrics
Fang, Zhengping, Shang, Shuying and Wang, Hao. 2013. "Confinement of C60 nanoparticles on the dynamics of polystyrene studied by anelastic spectroscopy and rheometrics." Epaarachchi, Jayantha A. , Lau, Alan Kin-tak and Leng, Jinsong (ed.) 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013). Gold Coast, Australia 10 - 12 Jul 2013 Bellingham, WA. United States. SPIE. https://doi.org/10.1117/12.2028373
Embedded fibre optic sensors under multi-axial loading: a pilot study
Peauril, J., Epaarachchi, J., Lau, K. T. and Wang, H.. 2013. "Embedded fibre optic sensors under multi-axial loading: a pilot study." Epaarachchi, Jayantha A. , Lau, Alan Kin-tak and Leng, Jinsong (ed.) 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013). Gold Coast, Australia 10 - 12 Jul 2013 Bellingham, WA. United States. SPIE. https://doi.org/10.1117/12.2027958
Characterisation of mechanical and thermal properties of epoxy grouts for composite repair of steel pipelines
Shamsuddoha, Md, Islam, Md Mainul, Aravinthan, Thiru, Manalo, Allan and Lau, Kin-tak. 2013. "Characterisation of mechanical and thermal properties of epoxy grouts for composite repair of steel pipelines." Materials and Design. 52, pp. 315-327. https://doi.org/10.1016/j.matdes.2013.05.068
Study on compressive properties of syntactic foams for marine applications
Salleh, Z., Islam, M. M. and Ku, H.. 2014. "Study on compressive properties of syntactic foams for marine applications." Journal of Multifunctional Composites. 2 (1), pp. 21-27. https://doi.org/10.12783/issn.2168-4286/2.1/Salleh
Effect of graphene nanosheets on morphology, thermal stability and flame retardancy of epoxy resin
Liu, Shan, Yan, Hongqiang, Fang, Zhengping and Wang, Hao. 2014. "Effect of graphene nanosheets on morphology, thermal stability and flame retardancy of epoxy resin ." Composites Science and Technology. 90, pp. 40-47. https://doi.org/10.1016/j.compscitech.2013.10.012
Fabrication process optimization of hemp fibre-reinforced polypropylene composites
Yan, Z. L., Zhang, J. C., Lin, G., Zhang, H., Ding, Y. and Wang, H.. 2013. "Fabrication process optimization of hemp fibre-reinforced polypropylene composites." Journal of Reinforced Plastics and Composites. 32 (20), pp. 1504-1512. https://doi.org/10.1177/0731684413501925
Improvement of mechanical properties of noil hemp fiber reinforced polypropylene composites by resin modification and fiber treatment
Yan, Zili, Zhang, Jianchun, Zhang, Hua and Wang, Hao. 2013. "Improvement of mechanical properties of noil hemp fiber reinforced polypropylene composites by resin modification and fiber treatment." Advances in Materials Science and Engineering. 2013, pp. 1-7. https://doi.org/10.1155/2013/941617
Extraction and processing of real time strain of embedded FBG sensors using a fixed filter FBG circuit and an artificial neural network
Kahandawa, Gayan C., Epaarachchi, Jayantha, Wang, Hao, Canning, John and Lau, K. T.. 2013. "Extraction and processing of real time strain of embedded FBG sensors using a fixed filter FBG circuit and an artificial neural network." Measurement. 46 (10), pp. 4045-4051. https://doi.org/10.1016/j.measurement.2013.07.029
Development of artificial neural network model in predicting performance of the smart wind turbine blade
Supeni, E. E., Epaarachchi, J. A., Islam, M. M. and Lau, K. T.. 2013. "Development of artificial neural network model in predicting performance of the smart wind turbine blade." 3rd Malaysian Postgraduate Conference (MPC 2013). Sydney, Australia 04 - 05 Jul 2013 Sydney, Australia.
Textile material forms for reinforcement materials: a review
Misnon, M. I., Islam, M. M., Epaarachchi, J. and Lau, K. T.. 2013. "Textile material forms for reinforcement materials: a review." 3rd Malaysian Postgraduate Conference (MPC 2013). Sydney, Australia 04 - 05 Jul 2013 Sydney, Australia.
Tensile behaviours of activated carbon coconut shell filled epoxy composites
Salleh, Z., Islam, M. M. and Ku, H.. 2013. "Tensile behaviours of activated carbon coconut shell filled epoxy composites." Noor, M. M., Rahman, M. M. and Ismail, J. (ed.) 3rd Malaysian Postgraduate Conference (MPC 2013). Sydney, Australia 04 - 05 Jul 2013 Sydney, Australia.
Quantitative kinetic and structural analysis of geopolymers Part 2. thermodynamics of sodium silicate activation of metakaolin
Zhang, Zuhua, Provis, John L., Wang, Hao, Bullen, Frank and Reid, Andrew. 2013. "Quantitative kinetic and structural analysis of geopolymers Part 2. thermodynamics of sodium silicate activation of metakaolin." Thermochimica Acta. 565, pp. 163-171. https://doi.org/10.1016/j.tca.2013.01.040
Effects of chemical treatments on hemp fibre structure
Kabir, M. M., Wang, H., Lau, K. T. and Cardona, F.. 2013. "Effects of chemical treatments on hemp fibre structure." Applied Surface Science. 276, pp. 13-23. https://doi.org/10.1016/j.apsusc.2013.02.086
Tensile properties of chemically treated hemp fibres as reinforcement for composites
Kabir, M. M., Wang, H., Lau, K. T. and Cardona, F.. 2013. "Tensile properties of chemically treated hemp fibres as reinforcement for composites." Composites Part B: Engineering. 53, pp. 362-368. https://doi.org/10.1016/j.compositesb.2013.05.048
Damage modelling of repeatedly impacted square fibre reinforced polymer composite tube
Guades, Ernesto, Aravinthan, Thiru, Manalo, Allan and Islam, Mainul. 2013. "Damage modelling of repeatedly impacted square fibre reinforced polymer composite tube." Materials and Design. 47, pp. 687-697. https://doi.org/10.1016/j.matdes.2012.12.051
Fibre composites for high pressure pipeline repairs, in-air and subsea: an overview
Shamsuddoha, Md, Islam, Md Mainul, Aravinthan, Thiru, Manalo, Allan, Lau, Kin-tak and Elder, David. 2012. "Fibre composites for high pressure pipeline repairs, in-air and subsea: an overview." Ueda, Tamon (ed.) 3rd Asia-Pacific Conference on FRP in Structures (APFIS 2012). Sapporo, Japan 02 - 04 Feb 2012 Hokkaido, Japan.
Behaviour of pultruded FRP hollow sections under eccentric loading
Islam, Md Mainul, Aravinthan, Thiru and Williams, Paul Garreth. 2012. "Behaviour of pultruded FRP hollow sections under eccentric loading." Monti, Georgio (ed.) 6th International Conference on FRP Composites in Civil Engineering (CICE 2012). Rome, Italy 13 - 15 Jun 2012 Rome, Italy.
Silk fibers and their unidirectional polymer composites
Ahmed, Mansur, Islam, Md Saiful, Ahsan, Qumrul and Islam, Md Mainul. 2012. "Silk fibers and their unidirectional polymer composites." Thomas, Sabu, Ninan, Neethu, Mohan, Mohan and Francis, Elizabeth (ed.) Natural polymers, biopolymers, biomaterials, and their composites, blends, and IPNs. Oakville, ON. Canada . Apple Academic Press (CRC Press). pp. 79-90
3D X-ray microtomography study on fibre breakage in noil hemp fibre reinforced polypropylene composites
Etaati, A., Wang, H., Pather, S., Yan, Z. and Mehdizadeh, S. Abdanan. 2013. "3D X-ray microtomography study on fibre breakage in noil hemp fibre reinforced polypropylene composites." Composites Part B: Engineering. 50, pp. 239-246. https://doi.org/10.1016/j.compositesb.2013.02.029
Numerical simulation of porosity on thermal properties and fire resistance of foamed concrete
Li, Qiang, Wang, Hao, Zhang, Zuhua and Reid, Andrew. 2013. "Numerical simulation of porosity on thermal properties and fire resistance of foamed concrete." Journal of Sustainable Cement-Based Materials. 2 (1), pp. 13-19. https://doi.org/10.1080/21650373.2012.755748
Mechanical property and structure of alkali-activated fly ash and slag blends
Yang, Tao, Yao, Xiao, Zhang, Zuhua and Wang, Hao. 2012. "Mechanical property and structure of alkali-activated fly ash and slag blends." Journal of Sustainable Cement-Based Materials. 1 (4), pp. 167-178. https://doi.org/10.1080/21650373.2012.752621
Optimized FBG sensor network for efficient detection of a delamination in FRP structures
Kahandawa, G. C., Epaarachchi, J. A., Wang, H. and Lau, K. T.. 2012. "Optimized FBG sensor network for efficient detection of a delamination in FRP structures." Jaafar, M., Azura, A. R., Leong, K. H. and Leong, A. Y. L. (ed.) 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today. Kuala Lumpur, Malaysia 06 - 08 Nov 2012 Kowloon, Hong Kong.
Fabrication process optimization of hemp fibre reinforced polypropylene composites
Yan, Z. L., Wang, H., Lau, K. T., Zhang, J. C., Zhang, H. and Ding, Y.. 2012. "Fabrication process optimization of hemp fibre reinforced polypropylene composites." Jaafar, M., Azura, A. R., Leong, K. H. and Leong, A. Y L. (ed.) 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today. Kuala Lumpur, Malaysia 06 - 08 Nov 2012 Kowloon, Hong Kong.
Mechanical properties of a bamboo charcoal reinforced polylactic acid composite
Ho, M. P., Wang, H., Lau, K. T., Jayaraman, K. and Bhattacharyya, D.. 2012. "Mechanical properties of a bamboo charcoal reinforced polylactic acid composite." Jaafar, M., Azura, A. R., Leong, K. H. and Leong, A. Y. (ed.) 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today. Kuala Lumpur, Malaysia 06 - 08 Nov 2012 Kowloon, Hong Kong.
The reactivity of fly ash in geopolymer synthesis: a qualification study by FTIR
Zhang, Z., Wang, H. and Provis, J. L.. 2012. "The reactivity of fly ash in geopolymer synthesis: a qualification study by FTIR ." Jaafar, M., Azura, A. R., Leong, K. H. and Leong, A. Y. L. (ed.) 8th Asian-Australasian Conference on Composite Materials (ACCM 8): Enabling Tomorrow's Industry Today . Kuala Lumpur, Malaysia 06 - 08 Nov 2012 Kowloon, Hong Kong.
A pilot study on flexural properties of epoxy nanoclay reinforced composites
Ku, H., Fung, S. Y., Islam, M., Li, X. and Chong, Y. P.. 2013. "A pilot study on flexural properties of epoxy nanoclay reinforced composites ." Journal of Reinforced Plastics and Composites. 32 (2), pp. 96-104. https://doi.org/10.1177/0731684412459246
Development of smart wind turbine blades
Supeni, E. E., Epaarachchi, J. A., Islam, M. M. and Lau, K. T.. 2012. "Development of smart wind turbine blades." Jaafar, M., Azura, A. R., Leong, K. H and Leong, A. Y. L (ed.) 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today. Kuala Lumpur, Malaysia 06 - 08 Nov 2012 Kowloon, Hong Kong.
Semisolid processing technology
Xie, Shuisheng, Li, Xinggang, Wang, Hao and Zhang, Ying. 2012. Semisolid processing technology. Beijing, China. Metallurgical Industry Press.
Thermal properties and structure conformation on silkworm silk fibre
Ho, Mei-po, Wang, Hao and Lau, Kin-tak. 2012. "Thermal properties and structure conformation on silkworm silk fibre." Heslehurst, Rikard Benton and Byrne, Ann (ed.) Composites Australia and the CRC for Advanced Composite Structures Conference 2012: Diversity in Composites. Leura, Australia 15 - 16 Mar 2012 Melbourne, Australia.
Compressive properties of chemically-treated hemp fibre reinforced composites
Kabir, Mohammad Mazedul, Wang, Hao, Lau, Alan, Cardona, Francisco and Aravinthan, Thiru. 2012. "Compressive properties of chemically-treated hemp fibre reinforced composites." Heslehurst, Rikard Benton and Byrne, Ann (ed.) Composites Australia and the CRC for Advanced Composite Structures Conference 2012: Diversity in Composites. Leura, Australia 15 - 16 Mar 2012 Melbourne, Australia.
Stiffness of FRP pultruded tubes under repeated axial impacts
Guades, Ernesto J., Aravinthan, Thiru, Islam, Md. Mainul and Manalo, Allan C.. 2012. "Stiffness of FRP pultruded tubes under repeated axial impacts." Ueda, Tamon (ed.) 3rd Asia-Pacific Conference on FRP in Structures (APFIS 2012). Sapporo, Japan 02 - 04 Feb 2012 Hokkaido, Japan.
Predicting the flow stress behavior of Ni-42.5Ti-3Cu during hot deformation using constitutive equations
Etaati, Amir, Dehghani, Kamran, Ebrahimi, G. R. and Wang, Hao. 2013. "Predicting the flow stress behavior of Ni-42.5Ti-3Cu during hot deformation using constitutive equations." Metals and Materials International. 19 (1), pp. 5-9. https://doi.org/10.1007/s12540-013-1002-9
Effects of energy level and impact repetitions on the impact fatigue behaviour and post-impact flexural properties of square FRP pultruded tubes
Guades, E. J., Aravinthan, T., Manalo, A. C. and Islam, M. M.. 2013. "Effects of energy level and impact repetitions on the impact fatigue behaviour and post-impact flexural properties of square FRP pultruded tubes." Samali, Bijan, Attard, Mario M. and Song, Chongmin (ed.) 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM22). Sydney, Australia 11 - 14 Dec 2012 London, United Kingdom.
Use of fixed wavelength Fibre-Bragg Grating (FBG) filters to capture time domain data from the distorted spectrum of an embedded FBG sensor to estimate strain with an artificial neural network
Kahandawa, G. C., Epaarachchi, J. A., Wang, H., Followell, D. and Birt, P.. 2013. "Use of fixed wavelength Fibre-Bragg Grating (FBG) filters to capture time domain data from the distorted spectrum of an embedded FBG sensor to estimate strain with an artificial neural network." Sensors and Actuators A: Physical. 194, pp. 1-7. https://doi.org/10.1016/j.sna.2012.12.028
Quantitative kinetic and structural analysis of geopolymers. Part 1. The activation of metakaolin with sodium hydroxide
Zhang, Zuhua, Wang, Hao, Provis, John L., Bullen, Frank, Reid, Andrew and Zhu, Yingcan. 2012. "Quantitative kinetic and structural analysis of geopolymers. Part 1. The activation of metakaolin with sodium hydroxide." Thermochimica Acta. 539, pp. 23-33. https://doi.org/10.1016/j.tca.2012.03.021
Sandwich composites made of syntactic foam core and paper skin: manufacturing and mechanical behavior
Islam, Md Mainul and Kim, Ho Sung. 2012. "Sandwich composites made of syntactic foam core and paper skin: manufacturing and mechanical behavior." Journal of Sandwich Structures and Materials. 14 (1), pp. 111-127. https://doi.org/10.1177/1099636211413564
Design of smart structures for wind turbine blades
Supeni, E. E., Epaarachchi, J. A., Islam, M. M. and Lau, K. T.. 2012. "Design of smart structures for wind turbine blades." Noor, M. M., Rahman, M. M. and Ismail, J. (ed.) 2nd Malaysian Postgraduate Conference (MPC 2012). Gold Coast, Australia 07 - 09 Jul 2012 Sydney, Australia.
Numerical simulation of porous structure in foam concrete on thermal insulation property
Li, Qiang, Wang, Hao, Bullen, Frank and Reid, Andrew. 2012. "Numerical simulation of porous structure in foam concrete on thermal insulation property ." Jaafar, M, Azura, A. R., Leong, K. H. and Leong, A. Y. L. (ed.) 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today. Kuala Lumpur, Malaysia 06 - 08 Nov 2012 Kowloon, Hong Kong.
A study on the dynamic mechanical properties of silk fibre composites
Ho, Mei-po, Wang, Hao, Ho, Chun-kit and Lau, Kin-tak. 2012. "A study on the dynamic mechanical properties of silk fibre composites." Advanced Materials Research. 410, pp. 106-109. https://doi.org/10.4028/www.scientific.net/AMR.410.106
Effects of ground granulated blast furnace slag on the mechanical and microstructure of fly ash-based geopolymer binders
Yang, T., Yao, X., Zhang, Z. and Wang, H.. 2012. "Effects of ground granulated blast furnace slag on the mechanical and microstructure of fly ash-based geopolymer binders." 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today. Kuala Lumpur, Malaysia 06 - 08 Nov 2012 Kowloon, Hong Kong.
Quantitative study of the reactivity of fly ash in geopolymerization by FTIR
Zhang, Zuhua, Wang, Hao and Provis, John L.. 2012. "Quantitative study of the reactivity of fly ash in geopolymerization by FTIR." Journal of Sustainable Cement-Based Materials. 1 (4), pp. 154-166. https://doi.org/10.1080/21650373.2012.752620
Effect of degumming time on silkworm silk fibre for biodegradable polymer composites
Ho, Mei-po, Wang, Hao and Lau, Kin-tak. 2012. "Effect of degumming time on silkworm silk fibre for biodegradable polymer composites." Applied Surface Science. 258 (8), pp. 3948-3955. https://doi.org/10.1016/j.apsusc.2011.12.068
Chemical treatments on plant-based natural fibre reinforced polymer composites: an overview
Kabir, M. M., Wang, H., Lau, K. T. and Cardona, F.. 2012. "Chemical treatments on plant-based natural fibre reinforced polymer composites: an overview ." Composites Part B: Engineering. 43 (7), pp. 2883-2892. https://doi.org/10.1016/j.compositesb.2012.04.053
Interfacial bonding and degumming effects on silk fibre/polymer biocomposites
Ho, Mei-po, Wang, Hao, Lau, Kin-tak, Lee, Joong-hee and Hui, David. 2012. "Interfacial bonding and degumming effects on silk fibre/polymer biocomposites ." Composites Part B: Engineering. 43 (7), pp. 2801-2812. https://doi.org/10.1016/j.compositesb.2012.04.042
Potential application of geopolymers as protection coatings for marine concrete III. Field experiment
Zhang, Zuhua, Yao, Xiao and Wang, Hao. 2012. "Potential application of geopolymers as protection coatings for marine concrete III. Field experiment ." Applied Clay Science. 67-68, pp. 57-60. https://doi.org/10.1016/j.clay.2012.05.008
Experimental investigation on the behaviour of square FRP composite tubes under repeated axial impact
Guades, Ernesto, Aravinthan, Thiru, Manalo, Allan and Islam, Mainul. 2013. "Experimental investigation on the behaviour of square FRP composite tubes under repeated axial impact." Composite Structures. 97, pp. 211-221. https://doi.org/10.1016/j.compstruct.2012.10.033
Signal monitoring system and methods of operating same
Kahandawa, Gayan Chanaka, Epaarachchi, Jayantha and Wang, Hao. 2013. Signal monitoring system and methods of operating same. WO/2013/151607
A review on the driving performance of FRP composite piles
Guades, Ernesto, Aravinthan, Thiru, Islam, Mainul and Manalo, Allan. 2012. "A review on the driving performance of FRP composite piles." Composite Structures. 94 (6), pp. 1932-1942. https://doi.org/10.1016/j.compstruct.2012.02.004
New concept for optimal application of natural fibre reinforced plastic (NFRP) in building construction
Fajrin, Jauhar, Zhuge, Yan, Bullen, Frank and Wang, Hao. 2012. "New concept for optimal application of natural fibre reinforced plastic (NFRP) in building construction ." Noor, Norhazilan and Ismail, Mohammad (ed.) 8th Asia Pacific Structural Engineering and Construction Conference and 1st International Conference on Civil Engineering Research (APSEC-ICCER 2012): Sustaining the World with Better Structures and Construction Practice. Surabaya, Indonesia 02 - 04 Oct 2012 Johor, Malaysia.
Reinforcement of polypropylene with hemp fibres
Yan, Z. L., Wang, H., Lau, K. T., Pather, S., Zhang, J. C., Lin, G. and Ding, Y.. 2013. "Reinforcement of polypropylene with hemp fibres." Composites Part B: Engineering. 46, pp. 221-226. https://doi.org/10.1016/j.compositesb.2012.09.027
Effects of halloysite in kaolin on the formation and properties of geopolymers
Zhang, Z., Wang, H., Yao, X. and Zhu, Y.. 2012. "Effects of halloysite in kaolin on the formation and properties of geopolymers." Cement and Concrete Composites. 34 (5), pp. 709-715. https://doi.org/10.1016/j.cemconcomp.2012.02.003
Critical factors on manufacturing processes of natural fibre composites
Ho, Mei-po, Wang, Hao, Lee, Joong-Hee, Ho, Chun-kit, Lau, Kin-tak, Leng, Jinsong and Hui, David. 2012. "Critical factors on manufacturing processes of natural fibre composites." Composites Part B: Engineering. 43 (8), pp. 3549-3562. https://doi.org/10.1016/j.compositesb.2011.10.001
Effect of silk fiber to the mechanical and thermal properties of its biodegradable composites
Ho, Mei-Po, Wang, Hao, Lau, Kin-Tak and Leng, Jinsong. 2013. "Effect of silk fiber to the mechanical and thermal properties of its biodegradable composites ." Journal of Applied Polymer Science. 127 (4), pp. 2389-2396. https://doi.org/10.1002/app.37539
Mechanical properties of chemically-treated hemp fibre reinforced sandwich composites
Kabir, M. M., Wang, H., Lau, K. T., Cardona, F. and Aravinthan, T.. 2012. "Mechanical properties of chemically-treated hemp fibre reinforced sandwich composites." Composites Part B: Engineering. 43 (2), pp. 159-169. https://doi.org/10.1016/j.compositesb.2011.06.003
Observation and prediction of the hot tear susceptibility of ternary Al-Si-Mg alloys
Easton, Mark A., Wang, Hao, Grandfield, John, Davidson, Cameron J., StJohn, David H., Sweet, Lisa D. and Couper, Malcolm J.. 2012. "Observation and prediction of the hot tear susceptibility of ternary Al-Si-Mg alloys." Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 43 (9), pp. 3227-3238. https://doi.org/10.1007/s11661-012-1132-6
Compressive strength characterization of polyester based fillers
Sirimanna, Chamila Sampath, Lokuge, Weena, Islam, Md Mainul and Aravinthan, Thiru. 2012. "Compressive strength characterization of polyester based fillers." Advanced Materials Research. https://doi.org/10.4028/www.scientific.net/AMR.410.32
Use of FBG sensors for SHM in aerospace structures
Kahandawa, Gayan C., Epaarachchi, Jayantha, Wang, Hao and Lau, K. T.. 2012. "Use of FBG sensors for SHM in aerospace structures." Photonic Sensors. 2 (3), pp. 203-214. https://doi.org/10.1007/s13320-012-0065-4
Numerical simulation the temperature field of the multi-coil batch during annealing process in Bell-type furnace
Mo, Chun-li, Li, Qiang, Guo, Xu-ming and Wang, Hao. 2012. "Numerical simulation the temperature field of the multi-coil batch during annealing process in Bell-type furnace." 2nd International Conference on Advanced Engineering Materials and Technology (AEMT 2012). Zhuhai, China 06 Jul 2012 Zurich, Switzerland. https://doi.org/10.4028/www.scientific.net/AMR.538-541.637
The effect of fibre chemical treatments on hemp reinforced composites
Wang, H., Kabir, M. M. and Lau, K. T.. 2011. "The effect of fibre chemical treatments on hemp reinforced composites ." 18th International Conference on Composite Materials (ICCM-18). Jeju, Korea 21 - 26 Aug 2011 Seoul, Korea.
Natural fibre composites with QLD based fibres and vegetable oils
Manthey, N. W., Cardona, F., Aravinthan, T., Wang, H. and Cooney, T.. 2011. "Natural fibre composites with QLD based fibres and vegetable oils." Fragomeni, Sam, Venkatesan, Srikanth, Lam, Nelson T. K. and Setunge, Sujeeva (ed.) 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM 21). Melbourne, Australia 07 - 10 Dec 2010 Leiden, Netherlands.
The implementation of statistical inference to study the bending strength of sustainable hybrid sandwich panel composite
Fajrin, Jauhar, Zhuge, Yan, Bullen, Frank and Wang, Hao. 2011. "The implementation of statistical inference to study the bending strength of sustainable hybrid sandwich panel composite." Advanced Materials Research. 250-253, pp. 956-961. https://doi.org/10.4028/www.scientific.net/AMR.250-253.956
Driveability of composite piles
Guades, E. J., Aravinthan, T. and Islam, M. M.. 2011. "Driveability of composite piles." Cowled, Craig J. L. (ed.) 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing (eddBE 2011). Brisbane, Australia 27 - 29 Apr 2011 Brisbane, Australia.
Effects of fly ash source and curing procedure on strength development of geopolymers
Zhang, Z., Wang, H., Reid, A. and Aravinthan, T.. 2011. "Effects of fly ash source and curing procedure on strength development of geopolymers." Fragomeni, Sam, Venkatesan, Srikanth, Lam, Nelson and Setunge, Sujeeva (ed.) 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM 21). Melbourne, Australia 07 - 10 Dec 2010 London, United Kingdom.
Effect of chemical treatment on the mechanical and thermal properties of hemp fibre reinforced thermoset sandwich composites
Kabir, M. M., Wang, H., Cardona, F. and Aravinthan, T.. 2011. "Effect of chemical treatment on the mechanical and thermal properties of hemp fibre reinforced thermoset sandwich composites." Fragomeni, Sam, Venkatesan, Srikanth, Lam, Nelson T. K. and Setunge, Sujeeva (ed.) 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM 21). Melbourne, Australia 07 - 10 Dec 2010 Leiden, Netherlands. https://doi.org/10.1201/b10571-78
Mechanical properties of an injected silk fibre reinforced PLA composite
Ho, Mei-Po, Lau, Kin-tak, Wang, Hao and Bhattacharyya, Debes. 2011. "Mechanical properties of an injected silk fibre reinforced PLA composite." Bhattacharyya, D., Lin, R. J. T. and Srivatsan, T. S. (ed.) 19th International Symposium on Processing and Fabrication of Advanced Materials (PFAM XIX). Auckland, New Zealand 14 - 17 Jan 2011 Auckland, New Zealand.
Behaviour of fibre composite pile under axial compression load
Guades, E. J., Sirimanna, C. S., Aravinthan, T. and Islam, M. M.. 2011. "Behaviour of fibre composite pile under axial compression load." Venkatesan, Srikanth, Lam, Nelson T. K. and Setunge, Sujeeva (ed.) 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM 21). Melbourne, Australia 07 - 10 Dec 2010 Leiden, Netherlands. https://doi.org/10.1201/b10571-81
Preliminary development of polymer based filler materials for GFRP tubular connector
Sirimanna, C. S., Islam, M. M. and Aravinthan, T.. 2011. "Preliminary development of polymer based filler materials for GFRP tubular connector." Fragomeni, Sam, Venkatesan, Srikanth, Lam, Nelson T. K. and Setunge, Sujeeva (ed.) 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM 21). Melbourne, Australia 07 - 10 Dec 2010 Leiden, Netherlands. https://doi.org/10.1201/b10571-79
Behaviour of fibre composite sandwich panels under uniformly distributed loading
Islam, M. M. and Aravinthan, T.. 2011. "Behaviour of fibre composite sandwich panels under uniformly distributed loading." Fragomeni, Sam, Venkatesan, Srikanth, Lam, Nelson T. K. and Setunge, Sujeeva (ed.) 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM 21). Melbourne, Australia 07 - 10 Dec 2010 Leiden, Netherlands. https://doi.org/10.1201/b10571-77
Flexural strength of sandwich panel with lignocellulosic composites intermediate layer: a statistic approach
Fajrin, Jauhar, Zhuge, Yan, Bullen, Frank and Wang, Hao. 2011. "Flexural strength of sandwich panel with lignocellulosic composites intermediate layer: a statistic approach." International Journal of Protective Structures. 2 (4), pp. 453-464. https://doi.org/10.1260/2041-4196.2.4.453
In vitro biodegradation behavior of magnesium and magnesium alloy
Wang, Hao and Shi, Zhiming. 2011. "In vitro biodegradation behavior of magnesium and magnesium alloy ." Journal of Biomedical Materials Research Part B: Applied Biomaterials. 98B (2), pp. 203-209. https://doi.org/10.1002/jbm.b.31769
Numerical simulation of rolling process and microstructure evolution of AM50 Mg alloy during hot rolling process
Hua, Fuan, Zhang, Chaoyi, Li, Qiang, Yu, Baoyi, Liu, Weihua, Li, Runxia, Xie, Shuisheng, Huang, Guojie, Cheng, Lei, Fu, Yao and Wang, Hao. 2011. "Numerical simulation of rolling process and microstructure evolution of AM50 Mg alloy during hot rolling process ." Advanced Materials Research. 291-294, pp. 449-454. https://doi.org/10.4028/www.scientific.net/AMR.291-294.449
Influence of fly ash proportions on properties of polymer concrete with polyester resin
Lokuge, Weena, Aravinthan, Thiru, Sirimanna, Chamila Sampath and Islam, Mainul. 2011. "Influence of fly ash proportions on properties of polymer concrete with polyester resin." 25th Biennial Conference of the Concrete Institute of Australia (Concrete 2011): Building a Sustainable Future. Perth, Australia 12 - 14 Oct 2011 Sydney, Australia.
Effects of chemical treatments on hemp fibre reinforced polyester composites
Kabir, Mohammad Mazedul. 2012. Effects of chemical treatments on hemp fibre reinforced polyester composites. PhD Thesis Doctor of Philosophy. University of Southern Queensland.
An investigation on the student performance in first year fundamental engineering course engineering statistics
Islam, Md Mainul and Epaarachchi, Jayantha Ananda. 2012. "An investigation on the student performance in first year fundamental engineering course engineering statistics." Mortimer, Rachel (ed.) 15th International First Year in Higher Education Conference (FYHE 2012) . Brisbane, Australia 26 - 29 Jun 2012 Brisbane, Australia.
Deformation behaviour of aluminum alloy A356 in semisolid state
Wang, H. and Ning, Z. L.. 2009. "Deformation behaviour of aluminum alloy A356 in semisolid state ." Aravinthan, Thiru, Karunasena, Warna (Karu) and Wang, Hao (ed.) 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM20). Toowoomba, Australia 02 - 05 Dec 2008 London, United Kingdom.
Influence of casting temperature on the thermal stability of Cu- and Zr-based metallic glasses: theoretical analysis and experiments
Zhu, Z. W., Zhang, H. F., Wang, H., Ding, B. Z. and Hu, Z. Q.. 2008. "Influence of casting temperature on the thermal stability of Cu- and Zr-based metallic glasses: theoretical analysis and experiments." Journal of Materials Research. 23 (10), pp. 2714-2719. https://doi.org/10.1557/jmr.2008.0335
Solidification microstructure modelling using cellular automaton method
Wang, H. and Li, Q.. 2008. "Solidification microstructure modelling using cellular automaton method." International Conference on Frontiers in Materials Science and Technology (FMST 2008). Brisbane, Australia 26 - 28 Mar 2008 Zurich, Switzerland. https://doi.org/10.4028/www.scientific.net/AMR.32.271
The development of a new grain refiner for magnesium alloys using the edge-to-edge model
Fu, H. M., Qiu, D., Zhang, M. X., Wang, H., Kelly, P. M. and Taylor, J. A.. 2008. "The development of a new grain refiner for magnesium alloys using the edge-to-edge model." Journal of Alloys and Compounds. 456 (1-2), pp. 390-394. https://doi.org/10.1016/j.jallcom.2007.02.076
Cu-based bulk amorphous alloy with larger glass-forming ability and supercooled liquid region
Fu, H. M., Zhang, H. F., Wang, H. and Hu, Z. Q.. 2008. "Cu-based bulk amorphous alloy with larger glass-forming ability and supercooled liquid region." Journal of Alloys and Compounds. 458 (1-2), pp. 390-393. https://doi.org/10.1016/j.jallcom.2007.03.114
Study of biodegradation of pure magnesium
Ren, Yibin, Wang, Hao, Huang, Jingjing, Zhang, Bingchun and Yang, Ke. 2007. "Study of biodegradation of pure magnesium." Kim, Young-Ha, Cho, Chong-Su, Kang, Inn-Kyu, Kim, Suk Young and Kwon, Oh Hyeong (ed.) ASBM7: 7th Asian Symposium on Biomedical Materials. Jeju, Korea 20 - 23 Aug 2006 Switzerland. John Wiley & Sons. https://doi.org/10.4028/www.scientific.net/KEM.342-343.601
The use of simulated games in an undergraduate course manufacturing processes
Pather, Selvan and Wang, Hao. 2009. "The use of simulated games in an undergraduate course manufacturing processes." Kestell, Colin, Grainger, Steven and Cheung, John (ed.) 20th Annual Conference for the Australasian Association of Engineering Education (AAEE 2009). Adelaide, Australia 06 - 09 Dec 2009 Adelaide, Australia.
Influence of casting temperature on microstructures and mechanical properties of Cu50Zr45.5Ti2.5Y2 metallic glass prepared using copper mold casting
Zhu, Zhengwang, Zhang, Haifeng, Wang, Hao, Ding, Bingzhe, Hu, Zhuang-Qi and Huang, Han. 2009. "Influence of casting temperature on microstructures and mechanical properties of Cu50Zr45.5Ti2.5Y2 metallic glass prepared using copper mold casting ." Journal of Materials Research. 24 (10), pp. 3108-3115. https://doi.org/10.1557/jmr.2009.0373
Development of hot drawing process for nitinol tube
Chen, Wei, Wang, H., Zhang, Lei and Tang, Xiushan. 2009. "Development of hot drawing process for nitinol tube." International Journal of Modern Physics B. 23 (6/7), pp. 1968-1974. https://doi.org/10.1142/S0217979209061913
Study of bio-corrosion of pure magnesium
Ren, Yibin, Huang, Jingjing, Yang, Ke, Zhang, Bingchun, Yao, Zhiming and Wang, Hao. 2005. "Study of bio-corrosion of pure magnesium." Acta Metallurgica Sinica (English Letters). 41 (11), pp. 1228-1232.
Hydrogen storage of magnesium-based nanocomposites system
Yao, X., Wu, C. Z., Wang, H., Cheng, H. M. and Lu, G. Q. Max. 2005. "Hydrogen storage of magnesium-based nanocomposites system." Journal of Materials Science and Technology. 21 (1 (Supplement)), pp. 57-60.
Fabrication of bulk amorphous Mg65Cu25Gd10 alloy of 12mm rod by water quenching
Liu, W. Y., Zhang, H. F., Hu, Z. Q., Wang, H. and Yao, X. D.. 2005. "Fabrication of bulk amorphous Mg65Cu25Gd10 alloy of 12mm rod by water quenching." Ke, W., Han, E. H., Han, Y. F., Kainer, K. and Luo, A. A. (ed.) Magnesium – Science, Technology and Applications. Zurich, Switzerland. Trans Tech Publications. pp. 211-214
Modeling of columnar-to-equiaxed transition in solidified Al-Si alloys
Yao, Xiangdong, Wang, Hao, He, B. and Zhou, X.. 2005. "Modeling of columnar-to-equiaxed transition in solidified Al-Si alloys." Zhong, Z., Saka, H., Kim, T. H., Holm, E. A., Han, Y. and Xie, X. (ed.) 5th Pacific Rim International Conference on Advanced Materials and Processing (PRICM 5). Beijing, China 02 - 05 Nov 2004 Zurich, Switzerland. Scientific.Net. https://doi.org/10.4028/www.scientific.net/MSF.475-479.3141
Formation and mechanical properties of Mg65Cu25Er10 and Mg65Cu15Ag10Er10 bulk amorphous alloys
Liu, Weili, Zhang, H. F., Hu, Z. Q. and Wang, Hao. 2005. "Formation and mechanical properties of Mg65Cu25Er10 and Mg65Cu15Ag10Er10 bulk amorphous alloys." Journal of Alloys and Compounds. 397 (1-2), pp. 202-206. https://doi.org/10.1016/j.jallcom.2005.01.043
Synthesis and mechanical properties of Cu-based bulk metallic glass composites containing in-situ TiC particles
Fu, H. M., Zhang, H. F., Wang, Hao, Zhang, Qingsheng and Hu, Z. Q.. 2005. "Synthesis and mechanical properties of Cu-based bulk metallic glass composites containing in-situ TiC particles." Scripta Materialia. 52 (7), pp. 669-673. https://doi.org/10.1016/j.scriptamat.2004.10.031
Crystallization behavior of (Cu60Zr30Ti10)99Sn1 bulk metallic glass
Wang, Hao, Song, Xiaoping, Yao, Xiangdong, Zhang, Haifeng and Hu, Zhuangqui. 2005. "Crystallization behavior of (Cu60Zr30Ti10)99Sn1 bulk metallic glass." Journal of Materials Science and Technology. 21 (Supl 1), pp. 51-53.
Preface to futures in mechanics of structures and materials conference. ACMSM20
Aravinthan, Thiru, Karunasena, Warna (Karu) and Wang, Hao. 2009. "Preface to futures in mechanics of structures and materials conference. ACMSM20." Aravinthan, Thiru, Karunasena, Warna (Karu) and Wang, Hao (ed.) 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM20). Toowoomba, Australia 02 - 05 Dec 2008 London, United Kingdom.
Manufacture of syntactic foams using starch as binder: post-mold processing
Islam, Md Mainul and Kim, Ho Sung. 2008. "Manufacture of syntactic foams using starch as binder: post-mold processing." Materials and Manufacturing Processes. 23 (8), pp. 884-892. https://doi.org/10.1080/10426910802413661
Syntactic foams consolidated with starch: mixing behaviour for post-mould processing
Islam, Md Mainul and Kim, Ho Sung. 2006. "Syntactic foams consolidated with starch: mixing behaviour for post-mould processing." 4th International Conference on Advanced Materials & Processing (ICAMP-4). Hamilton, New Zealand 10 - 13 Dec 2006 Hamilton, New Zealand.
Syntactic foams consolidated with starch: modelling for pre-mould processing
Islam, Md Mainul and Kim, Ho Sung. 2006. "Syntactic foams consolidated with starch: modelling for pre-mould processing." 4th International Conference on Advanced Materials & Processing (ICAMP-4). Hamilton, New Zealand 10 - 13 Dec 2006 Hamilton, New Zealand.
Novel syntactic foams made of ceramic hollow micro-spheres and starch - theory, structure and properties
Islam, Md Mainul and Kim, Ho Sung. 2006. "Novel syntactic foams made of ceramic hollow micro-spheres and starch - theory, structure and properties." Bandyopadhyay, Sri, Zeng, Q., Berndt, Christopher C., Rizkalla, S., Gowripalan, N. and Matison, Janison (ed.) ACUN-5 International Composites Conference. Sydney, Australia 11 - 14 Jul 2006 Sydney, Australia.
Syntactic foams consolidated with starch: mixing behaviour for post-mould processing
Islam, Md Mainul and Kim, Ho Sung. 2007. "Syntactic foams consolidated with starch: mixing behaviour for post-mould processing." Advanced Materials Research. 29-30, pp. 169-172.
Syntactic foams consolidated with starch: modelling for pre-mould processing
Islam, Md Mainul and Kim, Ho Sung. 2007. "Syntactic foams consolidated with starch: modelling for pre-mould processing." Advanced Materials Research. 29-30, pp. 165-168.
Novel syntactic foams made of ceramic hollow micro-spheres and starch: theory, structure and properties
Islam, Md Mainul and Kim, Ho Sung. 2007. "Novel syntactic foams made of ceramic hollow micro-spheres and starch: theory, structure and properties." Journal of Materials Science. 42 (15), pp. 6123-6132. https://doi.org/10.1007/s10853-006-1091-7
Manufacture of syntactic foams: pre-mold processing
Islam, Md Mainul and Kim, Ho Sung. 2007. "Manufacture of syntactic foams: pre-mold processing." Materials and Manufacturing Processes. 22 (1), pp. 28-36. https://doi.org/10.1080/10426910601015857
Pre-mould processing for syntactic foams: modelling, theory and experiment
Islam, Md Mainul and Kim, Ho Sung. 2008. "Pre-mould processing for syntactic foams: modelling, theory and experiment." 13th International Conference on Applied Mechanics and Mechanical Engineering (AMME-13). Cairo, Egypt 27 - 29 May 2008 Cairo, Egypt.
Magnesium thixotropic structure produced by controlled nucleation method
Wang, Hao and Ning, Zhiliang. 2007. "Magnesium thixotropic structure produced by controlled nucleation method ." Tezhong Zhuzao Ji Youse Hejin (Special Casting and Nonferrous Alloys).
A practical thermodynamic method to calculate the best glass-forming composition for bulk metallic glasses
Wang, Hao, Fu, H. M., Zhang, H. F. and Hu, Z. Q.. 2007. "A practical thermodynamic method to calculate the best glass-forming composition for bulk metallic glasses." International Journal of Nonlinear Sciences and Numerical Simulation. 8 (2), pp. 171-178. https://doi.org/10.1515/IJNSNS.2007.8.2.171
Effect of cooling conditions on grain size of AZ91 alloy
Ning, Zhiliang, Cao, P., Wang, Hao, Sun, Jianfei and Liu, Diankun. 2007. "Effect of cooling conditions on grain size of AZ91 alloy." Journal of Materials Science and Technology. 23 (5), pp. 645-649.
In-situ Si/Al composite produced by semisolid metal processing
Wang, Hao. 2007. "In-situ Si/Al composite produced by semisolid metal processing." Materials and Manufacturing Processes. 22 (5-6), pp. 696-699. https://doi.org/10.1080/10426910701384963
The effect of pre-processing and grain structure on the bio-corrosion and fatigue resistance of magnesium alloy AZ31
Wang, H., Estrin, Y., Fu, H. M., Song, G. L. and Zuberova, Z.. 2007. "The effect of pre-processing and grain structure on the bio-corrosion and fatigue resistance of magnesium alloy AZ31." Advanced Engineering Materials. 9 (11), pp. 967-972. https://doi.org/10.1002/adem.200700200
Bulk metallic glass composites
Wang, Hao. 2005. "Bulk metallic glass composites." Journal of Materials Science and Technology. 21 (Supl 1), pp. 86-90.
Semisolid structure formation and semisolid casting
Wang, Hao. 2005. "Semisolid structure formation and semisolid casting." Journal of Materials Science and Technology. 21 (Supl 1), pp. 65-71.
Effects of Carbon Nanotubes and Metal Catalysts on Hydrogen Storage in Magnesium Nanocomposites
Yao, X. D., Wu, C. Z., Wang, Hao, Cheng, H. M. and Lu, G. Q.. 2006. "Effects of Carbon Nanotubes and Metal Catalysts on Hydrogen Storage in Magnesium Nanocomposites." Journal of Nanoscience and Nanotechnology. 6 (2), pp. 494-498. https://doi.org/10.1166/jnn.2006.098
In situ TiB-reinforced cu-based bulk metallic glass composites
Fu, H. M., Wang, Hao, Zhang, H. F. and Hu, Z. Q.. 2006. "In situ TiB-reinforced cu-based bulk metallic glass composites." Scripta Materialia. 54 (11), pp. 1961-1966. https://doi.org/10.1016/j.scriptamat.2006.01.048
Numerical simulation of dendrite growth during solidification
Yao, X., Wang, H., He, B. and Zhou, X.. 2006. "Numerical simulation of dendrite growth during solidification." International Journal of Nonlinear Sciences and Numerical Simulation. 7 (2), pp. 171-176. https://doi.org/10.1515/IJNSNS.2006.7.2.171
In-situ Cu-based bulk metallic glass composite
Wang, Hao, Fu, H. M., Zhang, H. F. and Hu, Z. Q.. 2006. "In-situ Cu-based bulk metallic glass composite." International Journal of Modern Physics B. 20 (25-27), pp. 3963-3968. https://doi.org/10.1142/S0217979206040696
The effect of Gd addition on the glass-forming ability of Cu-Zr-Al alloy
Fu, H. M., Wang, Hao, Zhang, H. F. and Hu, Z. Q.. 2006. "The effect of Gd addition on the glass-forming ability of Cu-Zr-Al alloy." Scripta Materialia. 55 (2), pp. 147-150. https://doi.org/10.1016/j.scriptamat.2006.03.052
Modeling of semisolid structure formation in controlled nucleation method
Yao, X. and Wang, H.. 2006. "Modeling of semisolid structure formation in controlled nucleation method ." International Journal of Modern Physics B. 20 (25-27), pp. 4123-4128. https://doi.org/10.1142/S0217979206040969
In-situ Si/Al composite produced by semisolid metal processing
Wang, Hao. 2006. "In-situ Si/Al composite produced by semisolid metal processing ." Bandyopadhyay, Sri, Zeng, Q., Berndt, Christopher C., Rizkalla, S., Gowripalan, N. and Matison, Janison (ed.) ACUN-5 International Composites Conference. Sydney, Australia 11 - 14 Jul 2006 Sydney, Australia.
Tungsten fibre reinforced Zr-based bulk metallic glass composites
Wang, Hao, Zhang, H. F. and Hu, Z. Q.. 2006. "Tungsten fibre reinforced Zr-based bulk metallic glass composites ." Bandyopadhyay, Sri, Zeng, Q., Berndt, Christopher C., Rizkalla, S., Gowripalan, N. and Matison, Janison (ed.) ACUN-5 International Composites Conference. Sydney, Australia 11 - 14 Jul 2006 Sydney, Australia.
Tungsten fibre reinforced Zr-based bulk metallic glass composites
Wang, Hao, Zhang, H. F. and Hu, Z. Q.. 2007. "Tungsten fibre reinforced Zr-based bulk metallic glass composites." Materials and Manufacturing Processes. 22 (5-6), pp. 687-691. https://doi.org/10.1080/10426910701384922
Semisolid structure simulation in controlled nucleation process
Wang, H. and Yao, X. D.. 2006. "Semisolid structure simulation in controlled nucleation process." Solid State Phenomena. 116-117, pp. 614-617. https://doi.org/10.4028/www.scientific.net/SSP.116-117.614
The effect of initial microstructure of A356 alloys on the mechanical behavior in the semisolid state
Ning, Zhiliang, Wang, Hao and Sun, Jianfei. 2006. "The effect of initial microstructure of A356 alloys on the mechanical behavior in the semisolid state." Solid State Phenomena. 116-117, pp. 449-452. https://doi.org/10.4028/www.scientific.net/SSP.116-117.449
Semisolid casting of automotive component: water pump lid
Wang, Hao and Xu, Jun. 2006. "Semisolid casting of automotive component: water pump lid." Solid State Phenomena. 116-117, pp. 88-91. https://doi.org/10.4028/www.scientific.net/SSP.116-117.88
The developments of structural health/integrity monitoring systems using FBG sensors at CEEFC of USQ
Kahandawa, Gayan C., Epaarachchi, Jayantha A., Wang, Hao and Aravinthan, Thiru. 2010. "The developments of structural health/integrity monitoring systems using FBG sensors at CEEFC of USQ." Goh, Steven C. and Wang, Hao (ed.) 2010 Southern Region Engineering Conference (SREC 2010). Toowoomba, Australia 11 - 12 Nov 2010 Toowoomba, Australia.
Sustainable materials research at USQ
Wang, Hao. 2010. "Sustainable materials research at USQ." Goh, Steven C. and Wang, Hao (ed.) 2010 Southern Region Engineering Conference (SREC 2010). Toowoomba, Australia 11 - 12 Nov 2010 Toowoomba, Australia .
Temperature effects on full scale FRP bridge using innovative composite components
Sirimanna, C. S., Islam, M. M. and Aravinthan, T.. 2011. "Temperature effects on full scale FRP bridge using innovative composite components." Ye, Lieping, Feng, Peng and Yue, Qingrui (ed.) 5th International Conference on FRP Composites in Civil Engineering (CICE 2010). Beijing, China 27 - 29 Sep 2010 Beijing, China.
Deformation behavior of semisolid A356 alloy prepared by low temperature pouring
Ning, Z. L., Wang, H. and Sun, J. F.. 2010. "Deformation behavior of semisolid A356 alloy prepared by low temperature pouring." Materials and Manufacturing Processes. 25 (7), pp. 648-653. https://doi.org/10.1080/10426910903447279
Effects of Nd on microstructures and properties at the elevated temperature of a Mg-0.3Zn-0.32Zr alloy
Ning, Z. L., Wang, H., Liu, H. H., Cao, F. Y., Wang, S. T. and Sun, J. F.. 2010. "Effects of Nd on microstructures and properties at the elevated temperature of a Mg-0.3Zn-0.32Zr alloy." Materials and Design. 31 (9), pp. 4438-4444. https://doi.org/10.1016/j.matdes.2010.04.021
The role of casting temperature in preparation of bulk metallic glasses
Wang, Hao. 2010. "The role of casting temperature in preparation of bulk metallic glasses ." Chandra, T., Wanderka, N., Reimers, W. and Ionescu, M. (ed.) 6th International Conference on Processing and Manufacturing of Advanced Materials (THERMEC 2009): Processing, Fabrication, Properties, Applications. Berlin, Germany 25 - 29 Aug 2009 Switzerland. https://doi.org/10.4028/www.scientific.net/MSF.638-642.1671
Characteristics of a silk fibre reinforced biodegradable plastic
Ho, Mei-Po, Lau, Kin-Tak, Wang, Hao and Bhattacharyya, Debes. 2011. "Characteristics of a silk fibre reinforced biodegradable plastic." Composites Part B: Engineering. 42 (2), pp. 117-122. https://doi.org/10.1016/j.compositesb.2010.10.007
Effects of natural fibre surface on composite properties: a review
Kabir, M. M., Wang, H., Aravinthan, T., Cardona, F. and Lau, K. -T.. 2011. "Effects of natural fibre surface on composite properties: a review." Cowled, Craig J. L. (ed.) 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing (eddBE 2011). Brisbane, Australia 27 - 29 Apr 2011 Brisbane, Australia.
Behaviour of structural fibre composite sandwich panels under point load and uniformly distributed load
Islam, Md Mainul and Aravinthan, Thiru. 2010. "Behaviour of structural fibre composite sandwich panels under point load and uniformly distributed load." Composite Structures. 93 (1), pp. 206-215. https://doi.org/10.1016/j.compstruct.2010.05.019
Polymer based filler materials as infill for GFRP pile connector
Sirimanna, Chamila Sampath, Islam, Md Mainul and Aravinthan, Thiru. 2011. "Polymer based filler materials as infill for GFRP pile connector." Key Engineering Materials. 471-472, pp. 763-768. https://doi.org/10.4028/www.scientific.net/KEM.471-472.763
Fabrication and characterization of unidirectional silk fibre composites
Ahmed, Mansur, Islam, Md Saiful, Ahsan, Qumrul and Islam, Md Mainul. 2011. "Fabrication and characterization of unidirectional silk fibre composites." Key Engineering Materials. 471-472 (1), pp. 20-25. https://doi.org/10.4028/www.scientific.net/KEM.471-472.20
A review on the tensile properties of natural fiber reinforced polymer composites
Ku, H., Wang, H., Pattarachaiyakoop, N. and Trada, M.. 2011. "A review on the tensile properties of natural fiber reinforced polymer composites ." Composites Part B: Engineering. 42 (4), pp. 856-873. https://doi.org/10.1016/j.compositesb.2011.01.010
Cellular automaton modeling of semisolid microstructure formation
Li, Qiang, Yu, Baoyi, Zhang, Huawen, Li, Runxia, Wang, Feng, Xie, Shuisheng, Huang, Guojie and Wang, Hao. 2010. "Cellular automaton modeling of semisolid microstructure formation." China Foundry. 7 (2), pp. 143-148.
Flexural behaviour of structural fibre composite sandwich beams in flatwise and edgewise positions
Manalo, A. C., Aravinthan, T., Karunasena, W. and Islam, M. M.. 2010. "Flexural behaviour of structural fibre composite sandwich beams in flatwise and edgewise positions." Composite Structures. 92 (4), pp. 984-995. https://doi.org/10.1016/j.compstruct.2009.09.046
Pre-mould processing technique for syntactic foams: generalised modelling, theory and experiment
Islam, Md Mainul and Kim, Ho Sung. 2011. "Pre-mould processing technique for syntactic foams: generalised modelling, theory and experiment." Journal of Materials Processing Technology. 211 (4), pp. 708-716. https://doi.org/10.1016/j.jmatprotec.2010.12.006
An overview on syntactic foam core and paper skin sandwich composites as potential building materials
Islam, Md Mainul, Kim, Ho Sung and Kabir, Mohammad Mazedul. 2010. "An overview on syntactic foam core and paper skin sandwich composites as potential building materials." 2010 International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE2010). Khulna, Bangladesh 23 - 24 Dec 2010 Khulna, Bangladesh.
Effects of temperature on a pultruded FRP composite
Sirimanna, Chamila S., Islam, Md Mainul and Aravinthan, Thiru. 2010. "Effects of temperature on a pultruded FRP composite." Teh, Kian, Davies, Ian and Howard, Ian (ed.) 6th Australasian Congress on Applied Mechanics (ACAM 6). Perth, Western Australia 12 - 15 Dec 2010 Perth, Australia.
An investigation of spectral response of embedded Fibre Bragg Grating (FBG) sensors in a hollow composite cylindrical beam under pure torsion and combined loading
Kahandawa, Gayan C., Epaarachchi, Jayantha A., Wang, Hao, Followell, David, Birt, Peter, Canning, John and Stevenson, Michael. 2010. "An investigation of spectral response of embedded Fibre Bragg Grating (FBG) sensors in a hollow composite cylindrical beam under pure torsion and combined loading." Teh, Kian, Davies, Ian and Howard, Ian (ed.) 6th Australasian Congress on Applied Mechanics (ACAM 6). Perth, Western Australia 12 - 15 Dec 2010 Perth, Australia.
Effects of the self distortions of embedded FBG sensors on spectral response due to torsional and combined loads
Kahandawa, Gayan C., Epaarachchi, Jayantha A., Wang, Hao and Canning, John. 2010. "Effects of the self distortions of embedded FBG sensors on spectral response due to torsional and combined loads." 3rd Asia-Pacific Workshop on Structural Health Monitoring (APWSHM 2010). Tokyo, Japan 30 Nov - 02 Dec 2010 Tokyo, Japan.
Natural fibre composites with epoxidized vegetable oil (EVO) resins: a review
Manthey, N. W., Cardona, F., Aravinthan, T., Wang, H. and Cooney, T.. 2010. "Natural fibre composites with epoxidized vegetable oil (EVO) resins: a review." Goh, Steven C. and Wang, Hao (ed.) 2010 Southern Region Engineering Conference (SREC 2010). Toowoomba, Australia 11 - 12 Nov 2010 Toowoomba, Australia.
An overview on the application of FRP composites in piling system
Guades, E. J., Aravinthan, T. and Islam, M. M.. 2010. "An overview on the application of FRP composites in piling system." Goh, Steven C. and Wang, Hao (ed.) 2010 Southern Region Engineering Conference (SREC 2010). Toowoomba, Australia 11 - 12 Nov 2010 Canberra, Australia.
Physical and tensile properties of raw and treated silk fibres
Ahmed, Mansur, Islam, Md Saiful, Ahsan, Qumrul and Islam, Md Mainul. 2010. "Physical and tensile properties of raw and treated silk fibres." 2nd International Conference on Natural Polymers, Bio-Polymers, Bio-Materials, their Composites, Blends, IPN's and Gels Polyelectrolytes and Gels: Macro to Nano Scales (ICNP - 2010). Kottayam, India 24 - 26 Sep 2010 India.
Manufacturing and behaviour of sandwich composites made of starch as binder for core and adhesive between core and skins
Islam, Md Mainul and Kim, Ho Sung. 2010. "Manufacturing and behaviour of sandwich composites made of starch as binder for core and adhesive between core and skins." 2nd International Conference on Natural Polymers, Bio-Polymers, Bio-Materials, their Composites, Blends, IPN's and Gels Polyelectrolytes and Gels: Macro to Nano Scales (ICNP - 2010). Kottayam, India 24 - 26 Sep 2010 India.
Magnesium and magnesium alloys as degradable metallic biomaterials
Wang, H., Shi, Z. M. and Yang, K.. 2008. "Magnesium and magnesium alloys as degradable metallic biomaterials." Bell, John, Yan, Cheng, Ye, Lin and Zhang, Liangchi (ed.) International Conference on Frontiers in Materials Science and Technology (FMST 2008). Brisbane, Australia 26 - 28 Mar 2008 Zurich, Switzerland. https://doi.org/10.4028/www.scientific.net/AMR.32.207
Investigation for a suitable screw of a briquetting machine
Ali, Md Nawsher, Islam, Md Mainul and Ferdous, Chy. Md Refaul. 2004. "Investigation for a suitable screw of a briquetting machine." Hossain, M. Imtiaz (ed.) 2nd BSME-ASME lnternational Conference on Thermal Engineering. Dhaka, Bangladesh 02 - 04 Jan 2004 Dhaka, Bangladesh.
An overview of energy profile for Bangladesh: past, present and future uses
Khan, Kamrujjaman, Islam, Md Mainul, Rahman, M. L. and Ali, Md Nawsher. 2003. "An overview of energy profile for Bangladesh: past, present and future uses." 2003 National Seminar on the Role of Renewable and Alternative Energy Sources for National Development (SRRAESND-2003). Khulna, Bangladesh 19 - 20 Dec 2003 Pathumthani, Thailand.
An investigation on the raw materials and products of the briquetting machine
Islam, Md Mainul, Khan, Kamrujjaman, Ali, Md Nawsher and Islam, Md Shahidul. 2003. "An investigation on the raw materials and products of the briquetting machine." 2003 National Seminar on the Role of Renewable and Alternative Energy Sources for National Development (SRRAESND-2003). Khulna, Bangladesh 19 - 20 Dec 2003 Pathumthani, Thailand.
Syntactic foams as building materials consisting of inorganic hollow microspheres and starch binder
Kim, Ho Sung and Islam, Md Mainul. 2009. "Syntactic foams as building materials consisting of inorganic hollow microspheres and starch binder." Cornejo, Donald N. and Haro, Jason L. (ed.) Building materials: properties, performance and applications. New York, USA. Nova Science Publishers.
Behaviour of innovative fibre composite sandwich panels
Islam, Md Mainul. 2009. "Behaviour of innovative fibre composite sandwich panels." Workshop on Life Cycle Assessment of Sustainable FRP Materials (2009). Saitama, Japan 14 Dec 2009
Behaviour of innovative fibre composite sandwich panels under point loading
Islam, M. M., Aravinthan, T. and Van Erp, G.. 2009. "Behaviour of innovative fibre composite sandwich panels under point loading." Sim, Jongsung (ed.) 2nd Asia-Pacific Conference on FRP in Structures (APFIS 2009). Seoul, Korea 09 - 11 Dec 2009 Seoul, Korea.
Solar photovoltaic technology and Bangladesh
Ferdous, C. M. R., Islam, M. Shahidul, Islam, M. Mainul, Alam, M. M. Asraful and Rahman, A. N. M.Mizanur. 2003. "Solar photovoltaic technology and Bangladesh." 2003 National Seminar on the Role of Renewable and Alternative Energy Sources for National Development (SRRAESND-2003). Khulna, Bangladesh 19 - 20 Dec 2003 Pathumthani, Thailand.
Evaluation of the properties of raw materials and products of briquetting machine
Islam, Md Mainul, Ali, Md Nawsher and Mia, Sobahan. 2004. "Evaluation of the properties of raw materials and products of briquetting machine." Hossain, M. Imtiaz (ed.) 2nd BSME-ASME International Conference on Thermal Engineering. Dhaka, Bangladesh 02 - 04 Jan 2004 Dhaka, Bangladesh.
Present status and future trends in production of semisolid materials
Wang, Hao. 2003. "Present status and future trends in production of semisolid materials." Tezhong Zhuzao Ji Youse Hejin (Special Casting and Nonferrous Alloys). 131, pp. 332-334.
Crack opening behavior in aluminum alloy 5083
Islam, Md Mainul and Watanabe, Taiji. 2003. "Crack opening behavior in aluminum alloy 5083." Journal of Mechanical Engineering, Institution of Engineers, Bangladesh. ME 32, pp. 26-35.
Microstructure of MmM5/Mg multi-layer hydrogen storage films prepared by magnetron sputtering
Ouyang, L. Z., Wang, Hao, Zhu, M., Zou, Jin and Chung, C. Y.. 2004. "Microstructure of MmM5/Mg multi-layer hydrogen storage films prepared by magnetron sputtering." Microscopy Research and Technique. 64 (4), pp. 323-329. https://doi.org/10.1002/jemt.20089
Special Section: Design of Nonomaterials and Nanostructures [Foreword]
Lau, Kin-Tak, Wang, Hao and Yin, Yansheng. "Special Section: Design of Nonomaterials and Nanostructures [Foreword]." Materials and Design. 31 (4), pp. 1657-1657. https://doi.org/10.1016/j.matdes.2009.07.051
Erratum: “Influence of casting temperature on microstructures and mechanical properties of Cu50Zr45.5Ti2.5Y2 metallic glass prepared using copper mold casting” [J. Mater. Res. 24, 3108 (2009)]
Zhu, Zhengwang, Zhang, Haifeng, Wang, Hao, Ding, Bingzhe, Hu, Zhuang-Qi and Huang, Han. 2010. "Erratum: “Influence of casting temperature on microstructures and mechanical properties of Cu50Zr45.5Ti2.5Y2 metallic glass prepared using copper mold casting” [J. Mater. Res. 24, 3108 (2009)] ." Journal of Materials Research. 25 (3), pp. 605-605. https://doi.org/10.1557/JMR.2010.0080
Flexural behaviour of composite sandwiches for structural applications
Manalo, Allan, Aravinthan, Thiru, Karunasena, Warna and Islam, Mainul. 2009. "Flexural behaviour of composite sandwiches for structural applications." Oehlers, D. J., Griffith, M. C. and Seracino, R. (ed.) 9th International Symposium on Fibre Reinforced Polymers for Reinforced Concrete Structures (FRPRCS-9): Current Challenges and Future Trends. Sydney, Australia 13 - 15 Jul 2009 Adelaide, Australia.
Use of wireless tablet PCs as an effective learning and teaching enhancement tool
Xiang, Wei, Goh, Steven, Pather, Selvan, Maxwell, Andrew, Wang, Hao and Ku, Harry. 2009. "Use of wireless tablet PCs as an effective learning and teaching enhancement tool." Foley, Chris (ed.) EDUCAUSE Australasia Conference 2009: Innovate, Collaborate and Sustain. Perth, Australia 03 - 06 May 2009 Wembley, Western Australia.
Bid-Winning Potential Optimization for Concession Schemes with Imprecise Investment Parameters
Islam, Md. Mainul and Mohamed, Sherif. 2009. "Bid-Winning Potential Optimization for Concession Schemes with Imprecise Investment Parameters ." Journal of Construction Engineering and Management. 135 (8), pp. 690-700. https://doi.org/10.1061/(ASCE)CO.1943-7862.0000032
Futures in mechanics of structures and materials: proceedings of the 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM20), Toowoomba, Australia, 2-5 December 2008
Aravinthan, Thiru, Karunasena, Warna (Karu) and Wang, Hao. Aravinthan, Thiru, Karunasena, Warna (Karu) and Wang, Hao (ed.) 2009. Futures in mechanics of structures and materials: proceedings of the 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM20), Toowoomba, Australia, 2-5 December 2008. London, United Kingdom. CRC Press.
An overview on manufacturing and properties of syntactic foams made of ceramic hollow microspheres and starch
Islam, M. M. and Kim, H. S.. 2009. "An overview on manufacturing and properties of syntactic foams made of ceramic hollow microspheres and starch ." Aravinthan, Thiru, Karunasena, Warna and Wang, Hao (ed.) 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM20). Toowoomba, Australia 02 - 05 Dec 2008 London, United Kingdom.
Development of bulk metallic glass composites
Wang, Hao and Fu, Huameng. 2007. "Development of bulk metallic glass composites ." Fan, Cang (ed.) The world of bulk metallic glasses and their composites. Kerala, India. Research Signpost. pp. 73-92
Properties and mechanical behaviour of novel sandwich composites made of syntactic foam and paper skin
Islam, Md Mainul and Kim, Ho Sung. 2007. "Properties and mechanical behaviour of novel sandwich composites made of syntactic foam and paper skin." Veidt, Martin, Albermani, Faris, Daniel, Bill, Griffiths, John, Hargreaves, Doug, McAree, Ross, Meehan, Paul and Tan, Andy (ed.) 5th Australasian Congress on Applied Mechanics (ACAM 2007). Brisbane, Australia 10 - 12 Dec 2007 Sydney, Australia.
Multifarious fracture features of CuZrAlGd(Ag) bulk metallic glasses
Fu, H. M., Zhang, H. F., Wang, Hao and Hu, Z. Q.. 2007. "Multifarious fracture features of CuZrAlGd(Ag) bulk metallic glasses." Advanced Materials Research. 29-30, pp. 47-50.
Effect of pouring temperature on thixotropic microstructure formation of AZ91
Ning, Zhiliang, Wu, Peilian, Wang, Hao, Cao, Fuyang and Sun, Jianfei. 2007. "Effect of pouring temperature on thixotropic microstructure formation of AZ91." Rare Metals. 26 (S1), pp. 180-184.
Anomalous grain coarsening behaviour observed in grain-refined aluminium alloy cast using low superheat
Taylor, J. A., Wang, H., StJohn, D. H. and Bainbridge, I. F.. 2001. "Anomalous grain coarsening behaviour observed in grain-refined aluminium alloy cast using low superheat." Anjier, Joseph L. (ed.) 130th TMS Annual MeetingLight Metals 2001. New Orleans, Louisanna 11 - 15 Feb 2001 Warrendale, PA. United States.
Semisolid microstructural evolution of AlSi7Mg during partial remelting
Wang, Hao, Davidson, C. J. and StJohn, David H.. 2004. "Semisolid microstructural evolution of AlSi7Mg during partial remelting." Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing. 368 (1-2), pp. 159-167. https://doi.org/10.1016/j.msea.2003.10.305
Biocorrosion behaviour of magnesium alloys under pseudo-physiological conditions
Wang, Hao, Zhang, M. X., Shi, Z. M. and Yang, Ke. 2006. "Biocorrosion behaviour of magnesium alloys under pseudo-physiological conditions." Tissue Engineering. 12 (4), pp. 1067-1067.
Facile one-pot synthesis of MOF supported gold pseudo-single-atom catalysts for hydrogenation reactions
Wang, Zumin, Gu, Lin, Song, Li, Wang, Hao and Yu, Ranbo. 201. "Facile one-pot synthesis of MOF supported gold pseudo-single-atom catalysts for hydrogenation reactions." Materials Chemistry Frontiers. 2 (5), pp. 1024-1030. https://doi.org/10.1039/c8qm00081f