Woven hemp fabric reinforced vinyl ester composite treated with fire retardant

Article

Misnon, Mohd Iqbal, Islam, Md Mainul, Epaarachchi, Jayantha Ananda, Chen, Haizhen and Wang, Hao. 2016. "Woven hemp fabric reinforced vinyl ester composite treated with fire retardant." International Journal of Advances in Science, Engineering and Technology (IJASEAT). 4 (3), pp. 90-95.

Article Title	Woven hemp fabric reinforced vinyl ester composite treated with fire retardant
ERA Journal ID	210616
Article Category	Article
Authors	Misnon, Mohd Iqbal (Author), Islam, Md Mainul (Author), Epaarachchi, Jayantha Ananda (Author), Chen, Haizhen (Author) and Wang, Hao (Author)
Journal Title	International Journal of Advances in Science, Engineering and Technology (IJASEAT)
Journal Citation	4 (3), pp. 90-95
Number of Pages	6
Year	2016
Place of Publication	India
ISSN	2321-8991
	2321-9009
Web Address (URL)	http://iraj.in/journal/IJASEAT/
Abstract	Natural fibre composites are potentially used as low load bearing material in building infrastructure industry. For this targeted applications, the ability to inhibit fire are strongly suggested to be most priority for these materials. Common method incorporating fire retardant (FR) agent is by adding it during the mixing process between fibre and matrix or by using FR compounded resin. However, there are fewer works on applying FR agent to the reinforcement directly (especially on hemp fabric) and effect of this treated reinforcement in composite material. Thus, in this work, a commercial FR was used to treat woven hemp fabric (WHF) in order to enhance its FR properties and these properties were characterised employing burning, thermo-gravimetry and limiting oxygen index tests. This treated WHF was then converted into composite by means of vinyl ester resin, and similar tests as mentioned before were done in order to determine composite’s FR properties. Based on the results, utilising WHF treated with FR can be used to enhance FR properties of hemp fabric reinforced vinyl ester (HVE) composite. Thus, this procedure can be used as an alternative method to produce FR composite materials.
Keywords	burning test, composites, FR, limiting oxygen index, mechanical properties, woven hemp fabric.
ANZSRC Field of Research 2020	401602. Composite and hybrid materials
Public Notes	Files associated with this item cannot be displayed due to copyright restrictions.
Byline Affiliations	Centre of Excellence in Engineered Fibre Composites
	Zhejiang Textile and Fashion College, China
Institution of Origin	University of Southern Queensland

Permalink -

https://research.usq.edu.au/item/q3vyw/woven-hemp-fabric-reinforced-vinyl-ester-composite-treated-with-fire-retardant

1672
total views
13
total downloads
3
views this month
0
downloads this month

Export as

Related outputs

Pore accessibility matters in CO2 electrolysis: preventing H2 formation and boosting triple-phase boundary on microtubular gas-diffusion electrodes

Ge, Lei, Chen, Guoliang, Ma, Beibei, Kuang, Yizhu, Rabiee, Hesamoddin, Dorosti, Fatereh, Nanjundan, Ashok Kumar, Zhu, Zhonghua and Wang, Hao. 2025. "Pore accessibility matters in CO2 electrolysis: preventing H2 formation and boosting triple-phase boundary on microtubular gas-diffusion electrodes." Applied Catalysis B: Environment and Energy. 363. https://doi.org/10.1016/j.apcatb.2024.124803

Revelling pore microstructure impacts on the compressive strength of porous proppant based on finite and discrete element method

Liao, Zijia, Rabiee, Hesamoddin, Ge, Lei, Li, Xiaogang, Yang, Zhaozhong, Xue, Qi, Shen, Chao and Wang, Hao. 2025. "Revelling pore microstructure impacts on the compressive strength of porous proppant based on finite and discrete element method." Journal of Materials Science and Technology. 211, pp. 72-81. https://doi.org/10.1016/j.jmst.2024.05.054

Strong self-healing close-loop recyclable vitrimers via complementary dynamic covalent/non-covalent bonding

Wang, Cheng, Huo, Siqi, Ye, Guofeng, Zhang, Qi, Cao, Cheng-Fei, Lynch, Mark, Wang, Hao, Song, Pingan and Liu, Zhitian. 2024. "Strong self-healing close-loop recyclable vitrimers via complementary dynamic covalent/non-covalent bonding." Chemical Engineering Journal. https://doi.org/10.1016/j.cej.2024.157418

Green synthesis of a P/N/B-containing aggregate for boosting fire-retardancy of PA6/aluminum diethylphosphinate composites

Lu, Yixia, Chu, Tao, Huo, Siqi, Huang, Guobo, Xu, Zhiguang, Feng, Jiabing, Xie, Hongyan, Jafari, Pooya, Wang, Hao and Song, Pingan. 2024. "Green synthesis of a P/N/B-containing aggregate for boosting fire-retardancy of PA6/aluminum diethylphosphinate composites." Polymer Degradation and Stability. 229. https://doi.org/10.1016/j.polymdegradstab.2024.110949

A Hyperbranched Phosphorus/Nitrogen/Silicon-Containing Polymer as a Multifunctional Additive for Epoxy Resins

Zhong, Qian, Huo, Siqi, Wang, Cheng, Ye, Guofeng, Zhang, Qi, Wang, Hao and Liu, Zhitian. 2024. "A Hyperbranched Phosphorus/Nitrogen/Silicon-Containing Polymer as a Multifunctional Additive for Epoxy Resins ." Macromolecular Rapid Communications. https://doi.org/10.1002/marc.202400801

Engineering Interfacial Molecular Interactions on Ag Hollow Fibre Gas Diffusion Electrodes for High Efficiency in CO2 Conversion to CO

Ge, Lei, Kuang, Yizhu, Chen, Guoliang, Herath Mudiyanselage, Dimuthu, Rabiee, Hesamoddin, Ma, Beibei, Dorosti, Fatereh, Nanjundan, Ashok Kumar, Zhu, Zhonghua and Wang, Hao. 2024. "Engineering Interfacial Molecular Interactions on Ag Hollow Fibre Gas Diffusion Electrodes for High Efficiency in CO2 Conversion to CO." Chemistry: A European Journal. https://doi.org/10.1002/chem.202403251

Liquid phosphorus-based bis-imidazole compounds as latent curing agents for enhancing thermal, mechanical, and flame-retardant performances of single-component epoxy resins

Wang, Jingsheng, Wang, Jun, Wang, Fengyi, Yang, Shuang, Wu, Chaoqun, Chen, Xi, Chen, Kaiwen, Song, Pingan, Wang, Hao and Huo, Siqi. 2024. "Liquid phosphorus-based bis-imidazole compounds as latent curing agents for enhancing thermal, mechanical, and flame-retardant performances of single-component epoxy resins." Polymer Degradation and Stability. 230. https://doi.org/10.1016/j.polymdegradstab.2024.111066

Phosphorus/boron-containing, flame-retardant polyurethane elastomers with great mechanical, shape-memory, and recycling performances

Zhang, Tiantian, Huo, Siqi, Ye, Guofeng, Wang, Cheng, Zhang, Qi ., Xue, Yijiao, Song, Pingan, Wang, Hao and Liu, Zhitian. 2024. "Phosphorus/boron-containing, flame-retardant polyurethane elastomers with great mechanical, shape-memory, and recycling performances." Polymer Degradation and Stability. https://doi.org/10.1016/j.polymdegradstab.2024.111047

Optimising nanoparticle dispersion time for enhanced thermomechanical properties in DGEBA-based shape memory polymer composites

Jeewantha, Janitha, Epaarachchi, Jayantha and Islam, Md Mainul. 2024. "Optimising nanoparticle dispersion time for enhanced thermomechanical properties in DGEBA-based shape memory polymer composites." Journal of Research Updates in Polymer Science. 13, pp. 147-150.

Burden turns into benefit: Potentiality of macadamia nutshells for engineered polymer composites

Islam, Md Mainul, Khan, Md Sefat and Epaarachchi, Jayantha. 2024. "Burden turns into benefit: Potentiality of macadamia nutshells for engineered polymer composites." International Journal of Management and Applied Science (IJMAS). 10 (1), pp. 169-179.

Addressing Challenges in Engineering Education: A Case Study of Materials Technology Course

Islam, Md Mainul. 2024. "Addressing Challenges in Engineering Education: A Case Study of Materials Technology Course." Educational Research Applications. 9 (1). https://doi.org/10.29011/2575-7032.100232

Effects of Mg-based admixtures on chloride diffusion in alkali-activated fly ash-slag mortars

Zhang, Jingxiao, Ma, Yuwei, Zhang, Zuhua, Yang, Xiaocong, Nong, Xingzhong and Wang, Hao. 2024. "Effects of Mg-based admixtures on chloride diffusion in alkali-activated fly ash-slag mortars." Case Studies in Construction Materials. 21. https://doi.org/10.1016/j.cscm.2024.e03659

Recyclable thermoplastic FRP bars for reinforced concrete structures: Current status and future opportunities

Zeng, Jun-Jie, Feng, Sheng-Zhao, Zhao, Bin, Wu, Feng-Yi, Zhuge, Yan and Wang, Hao. 2024. "Recyclable thermoplastic FRP bars for reinforced concrete structures: Current status and future opportunities." Composite Structures. 348. https://doi.org/10.1016/j.compstruct.2024.118438

Proppant transport in secondary Sand fracturing using Eulerian-Eulerian multiphase model Approach

Yang, Huohai, Li, Kuncheng, Liao, Zijia, Li, Xiaogang, Rabiee, Hesamoddin, Ren, Shirui, Luo, Xinwei, Chen, Qingyuan, Ge, Lei and Wang, Hao. 2024. "Proppant transport in secondary Sand fracturing using Eulerian-Eulerian multiphase model Approach." Geoenergy Science and Engineering. 241. https://doi.org/10.1016/j.geoen.2024.213186

Fine-tuning thermal expansion characteristics of solid oxide fuel cell cathode via composite cathode fabrication

Shah, Nilam, Zhu, Tianjiu, Feng, Desheng, Xu, Xiaoyong, Liang, Fengli, Wang, Hao, Zhu, Zhonghua and Ge, Lei. 2024. "Fine-tuning thermal expansion characteristics of solid oxide fuel cell cathode via composite cathode fabrication." Journal of Power Sources. 616. https://doi.org/10.1016/j.jpowsour.2024.235143

Air thermal management platform assessment in centralized and decentralized air-conditioning systems

Salman, Ahmed Saadallah, Abdulkarim, Ali Hussein, Ali, Qays A., Ayad, Kakei A., Koca, Aliihsan, Epaarachchi, Jayantha and Dalkilic, Ahmet Selim. 2024. "Air thermal management platform assessment in centralized and decentralized air-conditioning systems." Journal of Thermal Analysis and Calorimetry: an international forum for thermal studies. https://doi.org/10.1007/s10973-024-13546-1

Distributed Optical Fibre-Based Pore Water Pressure Sensor for Early Warning of Geohazards

Anjana, Kusumi, Herath, Madhubhashitha, Epaarachchi, Jayantha and Priyankara, Nadeej. 2024. "Distributed Optical Fibre-Based Pore Water Pressure Sensor for Early Warning of Geohazards." 5th International Conference on Geotechnics for Sustainable Infrastructure Development (GEOTEC 2023). Hanoi, Vietnam 14 - 15 Dec 2023 Singapore. Springer. https://doi.org/10.1007/978-981-99-9722-0_132

Effect of atomic oxygen and vacuum thermal aging on graphene and glass fibre reinforced cyanate ester-based shape memory polymer composite for deployable thin wall structures

Epaarachchi, Jayantha, Jayalath, Sandaruwan, Trifoni, Eduardo, Herath, Madhubhashitha, Gdoutos, Eleftherios E. and Samarasekara, Bandu. 2024. "Effect of atomic oxygen and vacuum thermal aging on graphene and glass fibre reinforced cyanate ester-based shape memory polymer composite for deployable thin wall structures." Composites Science and Technology. 258. https://doi.org/10.1016/j.compscitech.2024.110870

Mechanical properties and microstructure of hemp hurd reinforced polylactide biocomposites for 3D printing

Xiao, Xianglian, Chevali, Venkata S., Song, Pingan, Yu, Bin, Feng, Jiabing, Loh, Thomas W and Wang, Hao. 2024. "Mechanical properties and microstructure of hemp hurd reinforced polylactide biocomposites for 3D printing." Polymer Composites. https://doi.org/10.1002/pc.28893

Mussel‐Inspired, Self‐Healing, Highly Effective Fully Polymeric Fire‐Retardant Coatings Enabled by Group Synergy

Ma, Zhewen, Feng, Jiabing, Huo, Siqi, Sun, Ziqi, Bourbigot, Serge, Wang, Hao, Gao, Jiefeng, Tang, Longcheng, Zheng, Wei and Song, Pingan. 2024. "Mussel‐Inspired, Self‐Healing, Highly Effective Fully Polymeric Fire‐Retardant Coatings Enabled by Group Synergy." Advanced Materials. https://doi.org/10.1002/adma.202410453

Rational Designing Microenvironment of Gas-Diffusion Electrodes via Microgel-Augmented CO2 Availability for High-Rate and Selective CO2 Electroreduction to Ethylene

Rabiee, Hesamoddin, Li, Mengran, Yan, Penghui, Wu, Yuming, Zhang, Xueqin, Dorosti, Fatereh, Zhang, Xi, Ma, Beibei, Hu, Shihu, Wang, Hao, Zhu, Zhonghua and Ge, Lei. 2024. "Rational Designing Microenvironment of Gas-Diffusion Electrodes via Microgel-Augmented CO2 Availability for High-Rate and Selective CO2 Electroreduction to Ethylene." Advanced Science. https://doi.org/10.1002/advs.202402964

Electrochemical and structural performances of carbon and glass fiber-reinforced structural supercapacitor composite at elevated temperatures

Anurangi, Jayani, Herath, Madhubhashitha, Galhena, Dona T L and Epaarachchi, Jayantha. 2024. "Electrochemical and structural performances of carbon and glass fiber-reinforced structural supercapacitor composite at elevated temperatures." Functional Composites and Structures. 6 (3). https://doi.org/10.1088/2631-6331/ad5e32

Bio-derived Schiff base vitrimer with outstanding flame retardancy, toughness, antibacterial, dielectric and recycling properties

Ye, Guofeng, Wang, Cheng, Zhang, Qi, Song, Pingan, Wang, Hao, Huo, Siqi and Liu, Zhitian. 2024. "Bio-derived Schiff base vitrimer with outstanding flame retardancy, toughness, antibacterial, dielectric and recycling properties." International Journal of Biological Macromolecules. 278 (Part 3). https://doi.org/10.1016/j.ijbiomac.2024.134933

Cyanate ester and polyethylene glycol based high temperature resistant shape memory polymer development for space applications

Jayalath, Sandaruwan, Herath, Madhubhashitha, Epaarachchi, Jayantha, Trifoni, Eduardo, Gdoutos, Eleftherios E. and Samarasekara, Bandu. 2024. "Cyanate ester and polyethylene glycol based high temperature resistant shape memory polymer development for space applications." Reactive and Functional Polymers. 201. https://doi.org/10.1016/j.reactfunctpolym.2024.105949

Strong yet Tough Catalyst-Free Transesterification Vitrimer with Excellent Fire-Retardancy, Durability, and Closed-Loop Recyclability

Ye, Guofeng, Huo, Siqi, Wang, Cheng, Zhang, Qi, Wang, Hao, Song, Pingan and Liu, Zhitian. 2024. "Strong yet Tough Catalyst-Free Transesterification Vitrimer with Excellent Fire-Retardancy, Durability, and Closed-Loop Recyclability ." Small. https://doi.org/10.1002/smll.202404634

In Situ Growth of Hierarchical Silver Sub‐Nanosheets on Zinc Nanosheets‐Based Hollow Fiber Gas‐Diffusion Electrodes for Electrochemical CO2 Reduction to CO

Chen, Guoliang, Ge, Lei, Kuang, Yizhu, Rabiee, Hesamoddin, Ma, Beibei, Dorosti, Fatereh, Nanjundan, Ashok Kumar, Zhu, Zhonghua and Wang, Hao. 2024. "In Situ Growth of Hierarchical Silver Sub‐Nanosheets on Zinc Nanosheets‐Based Hollow Fiber Gas‐Diffusion Electrodes for Electrochemical CO2 Reduction to CO." Small Science. https://doi.org/10.1002/smsc.202400184

Bio-inspired fabrication of brick-and-mortar interphase in carbon fiber/epoxy composites with significantly improved high-temperature durability

Li, Hefeng, Liu, Cong, Zhu, Jiabao, Huan, Xianhua, Qi, Pengfei, Xu, Ke, Geng, Hongbo, Guo, Xiaodong, Wu, Haoming, Zu, Lei, Ge, Lei, Jia, Xiaolong, Yang, Xiaoping and Wang, Hao. 2024. "Bio-inspired fabrication of brick-and-mortar interphase in carbon fiber/epoxy composites with significantly improved high-temperature durability." Advanced Composites and Hybrid Materials. 7 (2). https://doi.org/10.1007/s42114-024-00876-9

Acrylonitrile Butadiene Styrene (ABS) membrane for Air Filtration

Samarathunga, Imesha R, Epaarachchi, Jayantha, Sethunga, G S M D P and Herath, Madhubhashitha. 2024. "Acrylonitrile Butadiene Styrene (ABS) membrane for Air Filtration." 11th Australasian Congress on Applied Mechanics (ACAM2024). Brisbane, Australia 07 - 09 Feb 2024 Australia.

Lay-up configuration of glass fibre on cyanate ester based shape memory polymer composites

Jayalath, Sandaruwan, Epaarachchi, Jayantha and Herath, Madhubhashitha. 2024. "Lay-up configuration of glass fibre on cyanate ester based shape memory polymer composites." 11th Australasian Congress on Applied Mechanics (ACAM2024). Brisbane, Australia 07 - 09 Feb 2024 Australia.

Carbon Fibre Reinforced Bishphenol A Epoxy Composite Structures with Energy Storage Capability

Anurangi, Jayani, Herath, Madhubhashitha and Epaarachchi, Jayantha. 2024. "Carbon Fibre Reinforced Bishphenol A Epoxy Composite Structures with Energy Storage Capability." 11th Australasian Congress on Applied Mechanics (ACAM2024). Brisbane, Australia 07 - 09 Feb 2024 Australia.

Review of porous vegetation eco-concrete (PVEC) technology: From engineering requirements to material design

Zheng, Chaowei, Zhang, Zuhua, Chen, Ziye, Wang, Dongyu, Wang, Wenjing, Zhou, Zhengning, Zhu, Yingcan, Wang, Dongmin, Wang, Hao and Jiang, Zhengwu. 2024. "Review of porous vegetation eco-concrete (PVEC) technology: From engineering requirements to material design." Composites Part B: Engineering. 279. https://doi.org/10.1016/j.compositesb.2024.111442

Non-covalent and covalent-synergistical-interaction assembled GO self-supporting membrane with excellent alignment for ultrahigh H2 barrier applications

Liu, Cong, Li, Hefeng, Zhu, Jiabao, Huan, Xianhua, Xu, Ke, Geng, Hongbo, Guo, Xiaodong, Ge, Lei, Jia, Xiaolong, Yang, Xiaoping and Wang, Hao. 2024. "Non-covalent and covalent-synergistical-interaction assembled GO self-supporting membrane with excellent alignment for ultrahigh H2 barrier applications." Composites Part B: Engineering. 283. https://doi.org/10.1016/j.compositesb.2024.111652

Spider silk-inspired heterogeneous interphase featuring hybrid interaction for simultaneously improving the interfacial strength and fracture toughness between carbon fiber and epoxy by regulating hydrogen bond density

Li, Hefeng, Liu, Cong, Zhu, Jiabao, Sun, Jiangman, Huan, Xianhua, Geng, Hongbo, Li, Tianming, Ge, Lei, Jia, Xiaolong, Yang, Xiaoping and Wang, Hao. 2024. "Spider silk-inspired heterogeneous interphase featuring hybrid interaction for simultaneously improving the interfacial strength and fracture toughness between carbon fiber and epoxy by regulating hydrogen bond density." Composites Part B: Engineering. 280. https://doi.org/10.1016/j.compositesb.2024.111476

Optical fibre sensors for geohazard monitoring – A review

Anjana, Kusumi, Herath, Madhubhashitha and Epaarachchi, Jayantha. 2024. "Optical fibre sensors for geohazard monitoring – A review." Measurement. 235. https://doi.org/10.1016/j.measurement.2024.114846

Development of single-component epoxy resin with superb thermal stability, flame retardancy, smoke suppression, and latency via Cu-based phosphorus/imidazole-containing complex

Wang, Jingsheng, Wang, Jun, Yang, Shuang, Wu, Chaoqun, Chen, Xi, Chen, Kaiwen, Song, Pingan, Wang, Hao and Huo, Siqi. 2024. "Development of single-component epoxy resin with superb thermal stability, flame retardancy, smoke suppression, and latency via Cu-based phosphorus/imidazole-containing complex." Polymer Degradation and Stability. 228. https://doi.org/10.1016/j.polymdegradstab.2024.110906

A P/N/Si-containing hyperbranched flame retardant for improving mechanical performances, fire safety, and UV resistance of epoxy resins

Wang, Haonan, Huo, Siqi, Wang, Cheng, Ye, Guofeng, Zhang, Qi, Song, Pingan, Wang, Hao and Liu, Zhitian. 2024. "A P/N/Si-containing hyperbranched flame retardant for improving mechanical performances, fire safety, and UV resistance of epoxy resins." Progress in Organic Coatings. 193. https://doi.org/10.1016/j.porgcoat.2024.108562

Steering CO Selectivity in CO2 Electroreduction over Silver Microtubular Gas-Diffusion Electrodes via Surface Reconstruction

Kuang, Yizhu, Chen, Guoliang, Rabiee, Hesamoddin, Ma, Beibei, Dorosti, Fatereh, Nanjundan, Ashok Kumar, Zhu, Zhonghua, Wang, Hao and Ge, Lei. 2024. "Steering CO Selectivity in CO2 Electroreduction over Silver Microtubular Gas-Diffusion Electrodes via Surface Reconstruction." Energy and Fuels. 38 (11), pp. 10096-10105. https://doi.org/10.1021/acs.energyfuels.4c01240

Hollow fiber gas-diffusion electrodes with tailored crystal facets for tuning syngas production in electrochemical CO2 reduction

Chen, Guoliang, Ge, Lei, Kuang, Yizhu, Rabiee, Hesamoddin, Ma, Beibei, Dorosti, Fatereh, Nanjundan, Ashok Kumar, Zhu, Zhonghua and Wang, Hao. 2024. "Hollow fiber gas-diffusion electrodes with tailored crystal facets for tuning syngas production in electrochemical CO2 reduction." Chemical Engineering Journal. 490, p. 151651. https://doi.org/10.1016/j.cej.2024.151651

Electrochemical CO2 reduction integrated with membrane/adsorption-based CO2 capture in gas-diffusion electrodes and electrolytes

Rabiee, Hesamoddin, Yan, Penghui, Wang, Hao, Zhu, Zhonghua and Ge, Lei. 2024. "Electrochemical CO2 reduction integrated with membrane/adsorption-based CO2 capture in gas-diffusion electrodes and electrolytes." EcoEnergy. 2 (1), pp. 3-21. https://doi.org/10.1002/ece2.23

Enhanced thermo-mechanical properties of carbon fiber reinforced thermoresistant polymer, a blend of di-functional epoxy bisphenol A and a tri-functional epoxy Tactix 742

Anurangi, Jayani, Jayalath, Sandaruwan, Senevirathna, Sandhya Rani, Herath, Madhubhashitha and Epaarachchi, Jayantha. 2024. "Enhanced thermo-mechanical properties of carbon fiber reinforced thermoresistant polymer, a blend of di-functional epoxy bisphenol A and a tri-functional epoxy Tactix 742." Polymer Composites. 45 (12), pp. 10898-10910. https://doi.org/10.1002/pc.28517

A 2D biobased P/N-containing aggregate for boosting fire retardancy of PA6/aluminum diethylphosphinate via synergy

Lu, Yixia, Feng, Jiabing, Chu, Tao, Huo, Siqi, Xie, Hongyan, Xu, Zhiguang, Wang, Hao and Song, Pingan. 2024. "A 2D biobased P/N-containing aggregate for boosting fire retardancy of PA6/aluminum diethylphosphinate via synergy ." Journal of Materials Science and Technology. 198, pp. 73-82. https://doi.org/10.1016/j.jmst.2024.03.001

Compressive performance of full-scale GFRP composite sandwich wall panels with wood core

Yan, Zhihao, Shen, Chunyan, Fang, Hai, Xie, Lei, Bao, Xiangyu and Wang, Hao. 2024. "Compressive performance of full-scale GFRP composite sandwich wall panels with wood core." Journal of Building Engineering. 86. https://doi.org/10.1016/j.jobe.2024.108979

Mitigating thermal expansion effects in solid oxide fuel cell cathodes: A critical review

Shah, Nilam, Xu, Xiaoyong, Love, Jonathan, Wang, Hao, Zhu, Zhonghua and Ge, Lei. 2024. "Mitigating thermal expansion effects in solid oxide fuel cell cathodes: A critical review." Journal of Power Sources. 599. https://doi.org/10.1016/j.jpowsour.2024.234211

Fabrication of flame-retardant, strong, and tough epoxy resins by solvent-free polymerization with bioderived, reactive flame retardant

Ye, Guofeng, Huo, Siqi, Wang, Cheng, Zhang, Qi, Wang, Bingtao, Guo, Zhenghong, Wang, Hao and Liu, Zhitian. 2024. "Fabrication of flame-retardant, strong, and tough epoxy resins by solvent-free polymerization with bioderived, reactive flame retardant." Sustainable Materials and Technologies. 39. https://doi.org/10.1016/j.susmat.2024.e00853

Multifunctional phosphorus-containing imidazoliums endowing one-component epoxy resins with superior thermal latency, heat resistance, mechanical properties, and fire safety

Wang, Jingsheng, Wang, Jun, Yang, Shuang, Chen, Xi, Chen, Kaiwen, Zhou, Gen, Liu, Xian, Xu, Lin, Huo, Siqi, Song, Pingan and Wang, Hao. 2024. "Multifunctional phosphorus-containing imidazoliums endowing one-component epoxy resins with superior thermal latency, heat resistance, mechanical properties, and fire safety." Chemical Engineering Journal. 485. https://doi.org/10.1016/j.cej.2024.149852

Machine learning for expediting next-generation of fire-retardant polymer composites

Jafari, Pooya, Zhang, Ruoran, Huo, Siqi, Wang, Qingsheng, Yong, Jianming, Hong, Min, Deo, Ravinesh, Wang, Hao and Song, Pingan. 2024. "Machine learning for expediting next-generation of fire-retardant polymer composites." Composites Communications. 45. https://doi.org/10.1016/j.coco.2023.101806

Strong synergistic effects between P/N-containing supramolecular microplates and aluminum diethylphosphinate for fire-retardant PA6

Lu, Yixia, Feng, Jiabing, Yi, Degi, Xie, Hongyan, Xu, Zhiguang, Cao, Cheng-Fei, Huo, Siqi, Wang, Hao and Song, Pingan. 2024. "Strong synergistic effects between P/N-containing supramolecular microplates and aluminum diethylphosphinate for fire-retardant PA6." Composites Part A: Applied Science and Manufacturing. 176. https://doi.org/10.1016/j.compositesa.2023.107834

Construction of an epoxidized, phosphorus-based poly (styrene butadiene styrene) and its application in high-performance epoxy resin

Wang, Cheng, Huo, Siqi, Ye, Guofeng, Wang, Bingtao, Guo, Zhenghong, Zhang, Qi, Song, Pingan, Wang, Hao and Liu, Zhitian. 2024. "Construction of an epoxidized, phosphorus-based poly (styrene butadiene styrene) and its application in high-performance epoxy resin." Composites Part B: Engineering. 268. https://doi.org/10.1016/j.compositesb.2023.111075

Assessment of the performance of alkali-activated slag/fly ash using liquid and solid activators: early-age properties and efflorescence

Gong, Jihao, Ma, Yuwei, Wang, Yanru, Cao, Yubin, Fu, Jiyang and Wang, Hao. 2024. "Assessment of the performance of alkali-activated slag/fly ash using liquid and solid activators: early-age properties and efflorescence." Journal of Sustainable Cement-Based Materials. 13 (2), pp. 300-310. https://doi.org/10.1080/21650373.2023.2266837

Computer-aided feature recognition of CFRP plates based on real-time strain fields reflected from FBG measured signals

Wang, Hua-Ping, Ni, Yi-Qing, Chen, Cong, Jayawickrema, Minol and Epaarachchi, Jayantha. 2023. "Computer-aided feature recognition of CFRP plates based on real-time strain fields reflected from FBG measured signals." Composites Part B: Engineering. 263. https://doi.org/10.1016/j.compositesb.2023.110866

Pathways to Next-Generation Fire-Safe Alkali-Ion Batteries

Zhang, Yubai, Feng, Jiabing, Jiadong, Qin, Zhong, Yu Lin, Zhang, Shanqing, Wang, Hao, Bell, John, Guo, Zaiping and Song, Pingan. 2023. "Pathways to Next-Generation Fire-Safe Alkali-Ion Batteries." Advanced Science. 10 (24). https://doi.org/10.1002/advs.202301056

Fibre Reinforced Polymer Wall Assemblies in Axial Compression

Xie, Lei, Qi, Yujun, Bai, Yu, Qui, Chengyu, Wang, Hao, Fang, Hai and Zhao, Xiao-Ling. 2023. "Fibre Reinforced Polymer Wall Assemblies in Axial Compression." Bai, Yu (ed.) Composites for Building Assembly: Connections, Members and Structures. Singapore. Springer Science and Business Media Deutschland GmbH. pp. 143-166

Fibre Reinforced Polymer Columns with Bolted Sleeve Joints under Eccentric Compression

Xie, Lei, Bai, Yu, Qi, Yujun and Wang, Hao. 2023. "Fibre Reinforced Polymer Columns with Bolted Sleeve Joints under Eccentric Compression." Bai, Yu (ed.) Composites for Building Assembly: Connections, Members and Structures. Singapore. Springer Science and Business Media Deutschland GmbH. pp. 167-185

Fibre Reinforced Polymer Columns in Axial Compression

Xie, Lei, Bai, Yu, Qi, Yujun, Caprani, Colin and Wang, Hao. 2023. "Fibre Reinforced Polymer Columns in Axial Compression." Bai, Yu (ed.) Composites for Building Assembly: Connections, Members and Structures. Singapore. Springer Science and Business Media Deutschland GmbH. pp. 121-142

Optical Fibre Sensing and Deep Learning-Based Disaster and Climate Change Risk Assessments of Civil Infrastructure: Current Status and Future Perspective

Anjana, R. W. K., Herath, H. M. C., Jayawickrema, U. M. N. and Epaarachchi, J. A.. 2023. "Optical Fibre Sensing and Deep Learning-Based Disaster and Climate Change Risk Assessments of Civil Infrastructure: Current Status and Future Perspective." 13th International Conference on Sustainable Built Environment. Kandy, Sri Lanka 16 - 18 Dec 2022 Singapore . Springer. https://doi.org/10.1007/978-981-99-3471-3_33

Past, present and future prospective of global carbon fibre composite developments and applications

Zhang, Jin, Lin, Gang, Vaidya, Uday and Wang, Hao. 2023. "Past, present and future prospective of global carbon fibre composite developments and applications." Composites Part B: Engineering. 250. https://doi.org/10.1016/j.compositesb.2022.110463

Retarding effect of gypsum for hybrid alkali-activated cements (HAACs) at ambient temperature

Xue, Lili, Zhang, Zuhua, Walkley, Brant, Liu, Hongfei, Jiang, Yuanhai and Wang, Hao. 2023. "Retarding effect of gypsum for hybrid alkali-activated cements (HAACs) at ambient temperature." Materials Today Communications. 35. https://doi.org/10.1016/j.mtcomm.2023.106182

Intrinsic sulfuric acid resistance of C-(N)-A-S-H and N-A-S-H gels produced by alkali-activation of synthetic calcium aluminosilicate precursors

Wang, Yanru, Cao, Yubin, Zhang, Zuhua, Zhang, Peng, Ma, Yuwei, Wang, Aiguo and Wang, Hao. 2023. "Intrinsic sulfuric acid resistance of C-(N)-A-S-H and N-A-S-H gels produced by alkali-activation of synthetic calcium aluminosilicate precursors." Cement and Concrete Research. 165. https://doi.org/10.1016/j.cemconres.2022.107068

Enhancing fiber-matrix interface in carbon fiber/poly ether ether ketone (CF/PEEK) composites by carbon nanotube reinforcement of crystalline PEEK sizing

Wang, Shengdao, Wang, Tianjiao, Zhang, Shuwen, Dong, Zhongxin, Chevali, Venkata S., Yang, Yanchao, Wang, Guibin and Wang, Hao. 2023. "Enhancing fiber-matrix interface in carbon fiber/poly ether ether ketone (CF/PEEK) composites by carbon nanotube reinforcement of crystalline PEEK sizing." Composites Part B: Engineering. 251. https://doi.org/10.1016/j.compositesb.2022.110470

Microplastic materials in the environment: Problem and strategical solutions

Tian, Wenjie, Song, Pingan, Zhang, Huayang, Duan, Xiaoguang, Wei, Yen, Wang, Hao and Wang, Shaobin. 2023. "Microplastic materials in the environment: Problem and strategical solutions." Progress in Materials Science. 132. https://doi.org/10.1016/j.pmatsci.2022.101035

Effect of fly ash to slag ratio and Na2O content on leaching behaviour of fly Ash/Slag based alkali activated materials

Srinivasamurthy, Lakshmikanth Lakshmikanth, Chevali, Venkata S., Zhang, Zuhua and Wang, Hao. 2023. "Effect of fly ash to slag ratio and Na2O content on leaching behaviour of fly Ash/Slag based alkali activated materials." Construction and Building Materials. 383. https://doi.org/10.1016/j.conbuildmat.2023.131234

Development of exfoliated mica waste/natural rubber composites by latex stage mixing

Somarathna, Y.R., Rathnayake, G.L.H., Rupasinghe, P.S.V., Samarasinghe, I.H.K., Sudusingha, Y.C.Y., Siriwardena, S. and Epaarachchi, J.A.. 2023. "Development of exfoliated mica waste/natural rubber composites by latex stage mixing." Polymer-Plastics Technology and Materials. 62 (16), pp. 2143-2158. https://doi.org/10.1080/25740881.2023.2252894

Light and Shape-Memory Polymers: Characterization, Preparation, Stimulation, and Application

Fang, Liang, Yan, Wan, Chen, Shunping, Duan, Qiong, Herath, Madhubhashitha, Epaarachchi, Jayantha, Liu, Yue and Lu, Chunhua. 2023. "Light and Shape-Memory Polymers: Characterization, Preparation, Stimulation, and Application." Macromolecular Materials and Engineering. 308 (12). https://doi.org/10.1002/mame.202300158

A path forward: Understanding and mitigating defects in polycrystalline membranes

Dorosti, Fatereh Dorosti, Ge, Lei, Wang, Hao and Zhu, Zhonghua. 2023. "A path forward: Understanding and mitigating defects in polycrystalline membranes." Progress in Materials Science. 137. https://doi.org/10.1016/j.pmatsci.2023.101123

Exploring the Prospects of Macadamia Nutshells for Bio-Synthetic Polymer Composites: A Review

Khan, Md Sefat, Islam, Md Mainul, Epaarachchi, Jayantha and Shibata, Shinichi. 2023. "Exploring the Prospects of Macadamia Nutshells for Bio-Synthetic Polymer Composites: A Review." Polymers. 2023 (15). https://doi.org/10.3390/polym15194007

Thermo-Mechanical Behavior of Green Sandwich Structures for Building and Construction Applications

Hossain, Forhad, Arifuzzaman, Md, Islam, Md Shariful and Islam, Md Mainul. 2023. "Thermo-Mechanical Behavior of Green Sandwich Structures for Building and Construction Applications." Processes. 2023 (11). https://doi.org/10.3390/pr11082456

Impact of Spectral Shift Quality (SSQ) on Fibre Optic Sensor Readings in Reinforced Concrete Beams

Udagedara, U. M. N., Herath, H. M. C. M., Henarachchi, N. K., Sooriyaarachchi, H. P., Banerjee, S. and Epaarachchi, J. A.. 2023. "Impact of Spectral Shift Quality (SSQ) on Fibre Optic Sensor Readings in Reinforced Concrete Beams." 14th International Workshop on Structural Health Monitoring. Stanford University, Stanford, CA 12 - 14 Sep 2023 United States. DEStech Publications, Inc.

Sensory methods and machine learning based damage identification of fibre-reinforced composite structures: An introductory review

Bandara, Senaka, Herath, Madhubhashitha and Epaarachchi, Jayantha. 2023. "Sensory methods and machine learning based damage identification of fibre-reinforced composite structures: An introductory review." Journal of Reinforced Plastics and Composites. 42 (21-22), pp. 1119-1146. https://doi.org/10.1177/07316844221145972

Shape memory polymer composite circular and square hollow members for deployable structures

Emmanuel, K.D.C., Jeewantha, L.H.J., Herath, H.M.C.M., Epaarachchi, J.A. and Aravinthan, T.. 2023. "Shape memory polymer composite circular and square hollow members for deployable structures ." Composites Part A: Applied Science and Manufacturing. 171. https://doi.org/10.1016/j.compositesa.2023.107559

A phosphorus-containing aliphatic amine curing agent towards intrinsic flame-retardant and smoke-suppressive epoxy resins

Yang, Qingshan, Wang, Jun, Yang, Shuang, Huo, Siqi, Song, Pingan, Fang, Zhengping and Wang, Hao. 2023. "A phosphorus-containing aliphatic amine curing agent towards intrinsic flame-retardant and smoke-suppressive epoxy resins." Journal of Polymer Research. 30 (2). https://doi.org/10.1007/s10965-023-03437-8

Phosphaphenanthrene-modified zirconium phosphate nanosheets for improving fire resistance, smoke suppression and water tolerance of intumescent coatings

Wang, Cheng, Huo, Siqi, Ye, Guofeng, Fang, Zhengping, Wang, Hao and Liu, Zhitian. 2023. "Phosphaphenanthrene-modified zirconium phosphate nanosheets for improving fire resistance, smoke suppression and water tolerance of intumescent coatings." Journal of Coatings Technology and Research. 20 (4), p. 1353–1367. https://doi.org/10.1007/s11998-022-00749-0

A P/Si-containing polyethylenimine curing agent towards transparent, durable fire-safe, mechanically-robust and tough epoxy resins

Wang, Cheng, Huo, Siqi, Ye, Guofeng, Song, Pingan, Wang, Hao and Liu, Zhitian. 2023. "A P/Si-containing polyethylenimine curing agent towards transparent, durable fire-safe, mechanically-robust and tough epoxy resins." Chemical Engineering Journal. 451. https://doi.org/10.1016/j.cej.2022.138768

Durable flame-retardant, strong and tough epoxy resins with well-preserved thermal and optical properties via introducing a bio-based, phosphorus-phosphorus, hyperbranched oligomer

Ye, Guofeng, Huo, Siqi, Wang, Cheng, Song, Pingan, Fang, Zhengping, Wang, Hao and Liu, Zhitian. 2023. "Durable flame-retardant, strong and tough epoxy resins with well-preserved thermal and optical properties via introducing a bio-based, phosphorus-phosphorus, hyperbranched oligomer." Polymer Degradation and Stability. 207. https://doi.org/10.1016/j.polymdegradstab.2022.110235

A benzimidazolyl-substituted cyclotriphosphazene and its application in benzoxazine: Curing behaviors, thermal properties, and fire safety

Wu, Feifan, Wang, Jun, Wang, Jingsheng, Chen, Kaiwen, Yang, Shuang, Huo, Siqi and Wang, Hao. 2023. "A benzimidazolyl-substituted cyclotriphosphazene and its application in benzoxazine: Curing behaviors, thermal properties, and fire safety." Journal of Polymer Science. 61 (5), pp. 422-431. https://doi.org/10.1002/pol.20220586

Inherent flame-retardant vinyl ester resins with improved heat resistance enabled by additional P/N-containing cross-linking points

Qiu, Mei, Chen, Xi, Wang, Jun, Wang, Jingsheng, Chen, Kaiwen, Yang, Shuang, Huo, Siqi and Wang, Hao. 2023. "Inherent flame-retardant vinyl ester resins with improved heat resistance enabled by additional P/N-containing cross-linking points." Journal of Applied Polymer Science. 140 (23). https://doi.org/10.1002/app.53937

High-performance, intrinsically fire-safe, single-component epoxy resins and carbon fiber reinforced epoxy composites based on two phosphorus-derived imidazoliums

Wang, Jingsheng, Chen, Xi, Wang, Jun, Yang, Shuang, Chen, Kaiwen, Zhu, Lu, Huo, Siqi, Song, Pingan and Wang, Hao. 2023. "High-performance, intrinsically fire-safe, single-component epoxy resins and carbon fiber reinforced epoxy composites based on two phosphorus-derived imidazoliums." Polymer Degradation and Stability. 208. https://doi.org/10.1016/j.polymdegradstab.2023.110261

A phosphorus-containing tertiary amine hardener enabled flame retardant, heat resistant and mechanically strong yet tough epoxy resins

Yang, Qingshan, Wang, Jun, Chen, Xi, Yang, Shuang, Huo, Siqi, Chen, Qiufei, Guo, Pengzong, Wang, Xiao, Liu, Fu, Chen, Wei, Song, Pingan and Wang, Hao. 2023. "A phosphorus-containing tertiary amine hardener enabled flame retardant, heat resistant and mechanically strong yet tough epoxy resins." Chemical Engineering Journal. 468. https://doi.org/10.1016/j.cej.2023.143811

Thermal stability of limestone calcined clay cement (LC3) at moderate temperatures 100–400 °C

Cao, Yubin, Wang, Yanru, Zhang, Zuhu, Ma, Yuwei and Wang, Hao. 2023. "Thermal stability of limestone calcined clay cement (LC3) at moderate temperatures 100–400 °C ." Cement and Concrete Composites. 135, pp. 1-15. https://doi.org/10.1016/j.cemconcomp.2022.104832

Sunlight to heal mortar cracks: Photocatalytic self-healing mortar

Zhou, Yiming, Elchalakani, Mohamed, Du, Peng, Sun, Chuanzhi, Zhang, Zuhua and Wang, Hao. 2023. "Sunlight to heal mortar cracks: Photocatalytic self-healing mortar ." Cement and Concrete Composites. 135, pp. 1-14. https://doi.org/10.1016/j.cemconcomp.2022.104816

Flame-retardant poly (L-lactic acid) with enhanced UV protection and well-preserved mechanical properties by a furan-containing polyphosphoramide

Yu, Lingfeng, Huo, Siqi, Wang, Cheng, Ye, Guofeng, Song, Pingan, Feng, Jiabing, Fang, Zhenping, Wang, Hao and Liu, Zhitian. 2023. "Flame-retardant poly (L-lactic acid) with enhanced UV protection and well-preserved mechanical properties by a furan-containing polyphosphoramide." International Journal of Biological Macromolecules. 234. https://doi.org/10.1016/j.ijbiomac.2023.123707

Atom-economic synthesis of an oligomeric P/N-containing fire retardant towards fire-retarding and mechanically robust polylactide biocomposites

Feng, Jiabing, Lu, Yixia, Xie, Hongyan, Zhang, Yan, Huo, Siqi, Liu, Xiaohuan, Flynn, Matt, Xu, Zhiguang, Burey, Paulomi, Lynch, Mark, Wang, Hao and Song, Pingan. 2023. "Atom-economic synthesis of an oligomeric P/N-containing fire retardant towards fire-retarding and mechanically robust polylactide biocomposites." Journal of Materials Science and Technology. 160, pp. 86-95. https://doi.org/10.1016/j.jmst.2023.04.003

Investigation of Gas Release from Recycled Plastic Shopping Bags during Melting at Low Temperatures

Eberhard, Susette, Bowtell, Les, Lenske, Brian and Islam, Mainul. 2023. "Investigation of Gas Release from Recycled Plastic Shopping Bags during Melting at Low Temperatures." Advances in Materials Science and Engineering. 2023, pp. 1-9. https://doi.org/10.1155/2023/2378231

Enhancement of the Mechanical and Thermal Properties of Polypropylene and Nylon 6.6 Composite Blends

Al-Haik, Mohammad Yousef, Aldajah, Saud Hamad, Kabir, Mohammad Mazedul, Siddique, Waseem Ahmad, Haik, Yousef and Islam, Md Mainul. 2023. "Enhancement of the Mechanical and Thermal Properties of Polypropylene and Nylon 6.6 Composite Blends." Advances in Materials Science and Engineering. 2023. https://doi.org/10.1155/2023/6535067

Durability and long-term behaviour of shape memory polymers and composites for the space industry - A review of current status and future perspectives

Jayalath, Sandaruwan, Herath, Madhubhashitha, Epaarachchi, Jayantha, Trifoni, Eduardo, Gdoutos, Eleftherios E. and Fang, Liang. 2023. "Durability and long-term behaviour of shape memory polymers and composites for the space industry - A review of current status and future perspectives ." Polymer Degradation and Stability. 211. https://doi.org/10.1016/j.polymdegradstab.2023.110297

The use of fibre reinforced polymer composites for construction of structural supercapacitors: a review

Anurangi, Jayani, Herath, Madhubhashitha, Galhena, Dona T.L. and Epaarachchi, Jayantha. 2023. "The use of fibre reinforced polymer composites for construction of structural supercapacitors: a review ." Advanced Composite Materials. 32 (6), pp. 942-986. https://doi.org/10.1080/09243046.2023.2180792

Tuning Flow-through Cu-based Hollow Fiber Gas-diffusion Electrode for High-efficiency Carbon Monoxide (CO) Electroreduction to C2+ products

Rabiee, Hesamoddin, Heffernan, James K., Ge, Lei, Zhang, Xueqin, Yan, Penghui, Marcellin, Esteban, Hu, Shihu, Zhu, Zhonghua, Wang, Hao and Yuan, Zhiguo. 2023. "Tuning Flow-through Cu-based Hollow Fiber Gas-diffusion Electrode for High-efficiency Carbon Monoxide (CO) Electroreduction to C2+ products." Applied Catalysis B: Environment and Energy. 330, p. 122589. https://doi.org/10.1016/j.apcatb.2023.122589

Bioinspired Strong, Tough, and Biodegradable Poly(Vinyl Alcohol) and its Applications as Substrates for Humidity Sensors

Liu, Lei, Xu, Xiaodong, Zhu, Menghe, Cui, Xihua, Feng, Jiabing, Faraji Rad, Zahra, Wang, Hao and Song, Pingan. 2023. "Bioinspired Strong, Tough, and Biodegradable Poly(Vinyl Alcohol) and its Applications as Substrates for Humidity Sensors." Advanced Materials Technologies. https://doi.org/10.1002/admt.202201414

High‐concentration electrosynthesis of formic acid/formate from CO2: reactor and electrode design strategies

Kuang, Yizhu, Rabiee,Hesamoddin, Ge, Lei, Rufford, Thomas E., Yuan, Zhiguo, Bell, John and Wang, Hao. 2023. "High‐concentration electrosynthesis of formic acid/formate from CO2: reactor and electrode design strategies." Energy and Environmental Materials. https://doi.org/10.1002/eem2.12596

A novel hyperbranched phosphorus-boron polymer for transparent, flame-retardant, smoke-suppressive, robust yet tough epoxy resins

Ye, Guofeng, Huo, Siqi, Wang, Cheng, Shi, Qiu, Yu, Lingfeng, Liu, Zhitian, Fang, Zhengping and Wang, Hao. 2021. "A novel hyperbranched phosphorus-boron polymer for transparent, flame-retardant, smoke-suppressive, robust yet tough epoxy resins." Composites Part B: Engineering. 227, pp. 1-13. https://doi.org/10.1016/j.compositesb.2021.109395

One-step and green synthesis of a bio-based high-efficiency flame retardant for poly (lactic acid)

Ye, Guofeng, Huo, Siqi, Wang, Cheng, Shi, Qiu, Liu, Zhitian and Wang, Hao. 2021. "One-step and green synthesis of a bio-based high-efficiency flame retardant for poly (lactic acid)." Polymer Degradation and Stability. 192, pp. 1-9. https://doi.org/10.1016/j.polymdegradstab.2021.109696

Structure, chain dynamics and mechanical properties of poly(vinyl alcohol)/phytic acid composites

Li, Lujuan, Xu, Xiaodong, Wang, Bingtao, Song, Pingan, Cao, Qianqian, Yang, Yang, Xu, Zhiguang and Wang, Hao. 2021. "Structure, chain dynamics and mechanical properties of poly(vinyl alcohol)/phytic acid composites." Composites Communications. 28, pp. 1-6. https://doi.org/10.1016/j.coco.2021.100970

Surface doping of non-fullerene photoactive layer by soluble polyoxometalate for printable organic solar cells

Hu, Lin, You, Wen, Sun, Lulu, Yu, Shen, Yang, Mengyuan, Wang, Hao, Li, Zaifang and Zhou, Yinhua. 2021. "Surface doping of non-fullerene photoactive layer by soluble polyoxometalate for printable organic solar cells." Chemical Communications. 57 (21), pp. 2689-2692. https://doi.org/10.1039/d1cc00032b

Biomimetic, Mechanically Strong Supramolecular Nanosystem Enabling Solvent Resistance, Reliable Fire Protection and Ultralong Fire Warning

Cao, Cheng-Fei, Yu, Bin, Huang, Ju, Feng, Xiao-Lan, Lv, Ling-Yu, Sun, Feng-Na, Tang, Long-Cheng, Feng, Jiabing, Song, Pingan and Wang, Hao. 2022. "Biomimetic, Mechanically Strong Supramolecular Nanosystem Enabling Solvent Resistance, Reliable Fire Protection and Ultralong Fire Warning." ACS Nano. 16 (12), pp. 20865-20876. https://doi.org/10.1021/acsnano.2c08368

Solvent-Free Synthesis of Organic−Inorganic Polyphosphoramide-Halloysite Nanohybrids for Thermally Stable and Fire-Resistant Polylactide

Feng, Jiabing, Xie, Hongyan, Xu, Zhiguang, Huang, Guobo, Cao, Cheng-Fei, Zhang, Yan, Chevali, Venkata, Song, Pingan and Wang, Hao. 2022. "Solvent-Free Synthesis of Organic−Inorganic Polyphosphoramide-Halloysite Nanohybrids for Thermally Stable and Fire-Resistant Polylactide." ACS Sustainable Chemistry and Engineering. 10 (46), p. 15223−15232. https://doi.org/10.1021/acssuschemeng.2c04899

Strain patterns of short span reinforced concrete beams under flexural loading: A comparison between distributed sensing and concrete damaged plasticity modelling

Udagedara, Minol, Kumar, Arjun, Herath, Madhubhashitha, Hettiarachchi, Nandita, Sooriyaarachchi, Harsha and Epaarachchi, Jayantha. 2023. "Strain patterns of short span reinforced concrete beams under flexural loading: A comparison between distributed sensing and concrete damaged plasticity modelling." Journal of Intelligent Material Systems and Structures. 34 (10), p. 1123–1135. https://doi.org/10.1177/1045389X221128764

Damage onset analysis of optimized shape memory polymer composites during programming into curved shapes

Emmanuel, K. D. C., Jeewantha, L. H. J., Herath, H. M. C. M., Epaarachchi, J. A. and Aravinthan, T.. 2022. "Damage onset analysis of optimized shape memory polymer composites during programming into curved shapes." Materialia. 26, pp. 1-11. https://doi.org/10.1016/j.mtla.2022.101599

Fibre-optic sensor and deep learning-based structural health monitoring systems for civil structures: A review

Jayawickrema, U. M. N., Herath, H. M. C. M., Hettiarachchi, N. K., Sooriyaarachchi, H. P. and Epaarachchi, J. A.. 2022. "Fibre-optic sensor and deep learning-based structural health monitoring systems for civil structures: A review." Measurement. 199, pp. 1-31. https://doi.org/10.1016/j.measurement.2022.111543

One-pot sequence-selective synthesis of polylactone-containing block terpolymers based on renewable terpenoid-derived monomer and a simple organocatalyst

Xie, Hongyan, Feng, Jiabing, Yang, Xiaoxia, Zhao, Yan, Song, Pingan, Wang, Hao and Xu, Zhiguang. 2022. "One-pot sequence-selective synthesis of polylactone-containing block terpolymers based on renewable terpenoid-derived monomer and a simple organocatalyst." Journal of Polymer Science. 60 (20), pp. 2889-2898. https://doi.org/10.1002/pol.20220188

Shape memory polymer smart plaster for orthopaedic treatments

Jeewantha, Janitha, Jayalath, Sandaruwan, Emmanuel, Chris, Herath, Madhubhashitha, Forster, Elizabeth, Islam, Mainul, Leng, Jinsong and Epaarachchi, Jayantha. 2022. "Shape memory polymer smart plaster for orthopaedic treatments." Smart Materials and Structures. 31 (11), pp. 1-14. https://doi.org/10.1088/1361-665X/ac943b

Porous coordination polymer-based composite membranes for high-temperature polymer exchange membrane fuel cells

Chen, Guoliang, Ge, Lei, Lee, Joong Hee, Zhu, Zhonghua and Wang, Hao. 2022. "Porous coordination polymer-based composite membranes for high-temperature polymer exchange membrane fuel cells." Matter. 5 (7), pp. 2031-2053. https://doi.org/10.1016/j.matt.2022.05.033

New Undisputed Evidence and Strategy for Enhanced Lattice‐Oxygen Participation of Perovskite Electrocatalyst through Cation Deficiency Manipulation

Xu, Xiaomin, Pan, Yangli, Zhong, Yijun, Shi, Chenliang, Guan, Daqin, Ge, Lei, Hu, Zhiwei, Chin, Yi‐Ying, Lin, Hong‐Ji, Chen, Chien‐Te, Wang, Hao, Jiang, San Ping and Shao, Zongping. 2022. "New Undisputed Evidence and Strategy for Enhanced Lattice‐Oxygen Participation of Perovskite Electrocatalyst through Cation Deficiency Manipulation." Advanced Science. 9 (14), pp. 1-10. https://doi.org/10.1002/advs.202200530

Regulating the reaction zone of electrochemical CO2 reduction on gas-diffusion electrodes by distinctive hydrophilic-hydrophobic catalyst layers

Rabiee, Hesamoddin, Ge, Lei, Zhao, Jing, Zhang, Xueqin, Li, Mengran, Hu, Shihu, Smart, Simon, Rufford, Thomas E., Zhu, Zhonghua, Wang, Hao and Yuan, Zhiguo. 2022. "Regulating the reaction zone of electrochemical CO2 reduction on gas-diffusion electrodes by distinctive hydrophilic-hydrophobic catalyst layers." Applied Catalysis B: Environment and Energy. 310, pp. 1-11. https://doi.org/10.1016/j.apcatb.2022.121362

Composite cathodes for protonic ceramic fuel cells: Rationales and materials

Wang, Meng, Su, Chao, Zhu, Zhonghua, Wang, Hao and Ge, Lei. 2022. "Composite cathodes for protonic ceramic fuel cells: Rationales and materials." Composites Part B: Engineering. 238, pp. 1-18. https://doi.org/10.1016/j.compositesb.2022.109881

Early research of shape memory polymer vascular stents

Jeewantha, Lama Hewage Janitha, Epaarachchi, Jayantha Ananda, Forster, Elizabeth, Islam, Mainul and Leng, Jinsong. 2022. "Early research of shape memory polymer vascular stents." Express Polymer Letters. 16 (9), pp. 902-923. https://doi.org/10.3144/expresspolymlett.2023.49

Microtubular electrodes: An emerging electrode configuration for electrocatalysis, bioelectrochemical and water treatment applications

Rabiee, Hesamoddin, Ge, Lei, Hu, Shihu, Wang, Hao and Yuan, Zhiguo. 2022. "Microtubular electrodes: An emerging electrode configuration for electrocatalysis, bioelectrochemical and water treatment applications." Chemical Engineering Journal. 450 (Part 1). https://doi.org/10.1016/j.cej.2022.138476

Mechanical property and microstructure development in alkali activated fly ash slag blends due to efflorescence

Srinivasamurthy, Lakshmikanth, Chevali, Venkata S., Zhang, Zuhua, Longhi, Marlon A., Loh, Thomas W. and Wang, Hao. 2022. "Mechanical property and microstructure development in alkali activated fly ash slag blends due to efflorescence." Construction and Building Materials. 332, pp. 1-17. https://doi.org/10.1016/j.conbuildmat.2022.127273

Flexible pressure sensors via engineering microstructures for wearable human-machine interaction and health monitoring applications

Cui, Xihua, Huang, Fengli, Zhang, Xianchao, Song, Pingan, Zheng, Hua, Chevali, Venkata, Wang, Hao and Xu, Zhiguang. 2022. "Flexible pressure sensors via engineering microstructures for wearable human-machine interaction and health monitoring applications." iScience. 25 (4), pp. 1-24. https://doi.org/10.1016/j.isci.2022.104148

Small multiamine molecule enabled fire-retardant polymeric materials with enhanced strength, toughness, and self-healing properties

Liu, Lei, Zhu, Menghe, Ma, Zhewen, Xu, Xiaodong, Dai, Jinfeng, Yu, Youming, Seraji, Seyed Mohsen, Wang, Hao and Song, Pingan. 2022. "Small multiamine molecule enabled fire-retardant polymeric materials with enhanced strength, toughness, and self-healing properties." Chemical Engineering Journal. 400, pp. 1-11. https://doi.org/10.1016/j.cej.2022.135645

Bio-inspired, sustainable and mechanically robust graphene oxide-based hybrid networks for efficient fire protection and warning

Cao, Cheng-Fei, Yu, Bin, Guo, Bi-Fan, Hu, Wan-jun, Sun, Feng-Na, Zhang, Zhao-Hui, Li, Shi-Neng, Wu, Wei, Tang, Long-Cheng, Song, Pingan and Wang, Hao. 2022. "Bio-inspired, sustainable and mechanically robust graphene oxide-based hybrid networks for efficient fire protection and warning." Chemical Engineering Journal. 439. https://doi.org/10.1016/j.cej.2022.134516

A lava-inspired micro/nano-structured ceramifiable organic-inorganic hybrid fire-extinguishing coating

Ma, Zhewen, Zhang, Jianzhong, Maluk, Cristian, Yu, Youming, Seraji, Seyed Mohsen, Yu, Bin, Wang, Hao and Song, Pingan. 2022. "A lava-inspired micro/nano-structured ceramifiable organic-inorganic hybrid fire-extinguishing coating." Matter. 5 (3), pp. 911-932. https://doi.org/10.1016/j.matt.2021.12.009

Distributed sensing based real-time process monitoring of shape memory polymer components

Herath, Madhubhashitha, Emmanuel, Chris, Jeewantha, Janitha, Epaarachchi, Jayantha and Leng, Jinsong. 2022. "Distributed sensing based real-time process monitoring of shape memory polymer components." Journal of Applied Polymer Science. 139 (22). https://doi.org/10.1002/app.52247

Lightweight proppants in unconventional oil and natural gas development: A review

Liao, Zijia, Li, Xiaogang, Ge, Lei, Yang, Zhaozhong, Zhu, Jingyi, Xue, Qi and Wang, Hao. 2022. "Lightweight proppants in unconventional oil and natural gas development: A review." Sustainable Materials and Technologies. 33, pp. 1-18. https://doi.org/10.1016/j.susmat.2022.e00484

Investigation of curing kinetics and internal strains to enhance performances of bisphenol A based shape memory polymers

Jeewantha, L. H. J., Emmanuel, K. D. C., Herath, H. M. C. M., Epaarachchi, J. A., Islam, M. M. and Leng, J.. 2022. "Investigation of curing kinetics and internal strains to enhance performances of bisphenol A based shape memory polymers." Materialia. 21. https://doi.org/10.1016/j.mtla.2021.101264

Study of acidic degradation of alkali-activated materials using synthetic C-(N)-A-S-H and N-A-S-H gels

Wang, Yanru, Cao, Yubin, Zhang, Zuhua, Huang, Jizhong, Zhang, Peng, Ma, Yuwei and Wang, Hao. 2022. "Study of acidic degradation of alkali-activated materials using synthetic C-(N)-A-S-H and N-A-S-H gels." Composites Part B: Engineering. 230, pp. 1-14. https://doi.org/10.1016/j.compositesb.2021.109510

Flame-retardant, transparent, mechanically-strong and tough epoxy resin enabled by high-efficiency multifunctional boron-based polyphosphonamide

Huo, Siqi, Zhou, Zhongxiao, Jiang, Jiawei, Sai, Ting, Ran, Shiya, Fang, Zhengping, Song, Pingan and Wang, Hao. 2022. "Flame-retardant, transparent, mechanically-strong and tough epoxy resin enabled by high-efficiency multifunctional boron-based polyphosphonamide." Chemical Engineering Journal. 427, pp. 1-15. https://doi.org/10.1016/j.cej.2021.131578

Fire-retardant unsaturated polyester thermosets: The state-of-the-art, challenges and opportunities

Seraji, Seyed Mohsen, Song, Pingan, Varley, Russell J., Bourbigot, Serge, Voice, Dean and Wang, Hao. 2022. "Fire-retardant unsaturated polyester thermosets: The state-of-the-art, challenges and opportunities." Chemical Engineering Journal. 430, pp. 1-18. https://doi.org/10.1016/j.cej.2021.132785

A reactive copper-organophosphate-MXene heterostructure enabled antibacterial, self-extinguishing and mechanically robust polymer nanocomposites

Liu, Lei, Zhu, Menghe, Ma, Zhewen, Xu, Xiaodong, Seraji, Seyed Mohsen, Yu, Bin, Sun, Ziqi, Wang, Hao and Song, Pingan. 2022. "A reactive copper-organophosphate-MXene heterostructure enabled antibacterial, self-extinguishing and mechanically robust polymer nanocomposites." Chemical Engineering Journal. 430, pp. 1-12. https://doi.org/10.1016/j.cej.2021.132712

A Liquid Phosphaphenanthrene-Derived Imidazole for Improved Flame Retardancy and Smoke Suppression of Epoxy Resin

Huo, Siqi, Yang, Shuang, Wang, Jun, Cheng, Jianwen, Zhang, Qianqian, Hu, Yefa, Ding, Guoping, Zhang, Qiaoxin, Song, Pingan and Wang, Hao. 2020. "A Liquid Phosphaphenanthrene-Derived Imidazole for Improved Flame Retardancy and Smoke Suppression of Epoxy Resin." ACS Applied Polymer Materials. 2 (8), pp. 3566-3575. https://doi.org/10.1021/acsapm.0c00577

Advances and challenges in eco-benign fire-retardant polylactide

Xue, Yijiao, Feng, Jiabing, Ma, Zhewen, Liu, Lina, Zhang, Yan, Dai, Jinfeng, Xu, Zhiguang, Bourbigot, Serge, Wang, Hao and Song, Pingan. 2021. "Advances and challenges in eco-benign fire-retardant polylactide." Materials Today Physics. 21, pp. 1-22. https://doi.org/10.1016/j.mtphys.2021.100568

Relationship between microstructure of AgCl film and electrochemical behavior of Ag|AgCl electrode for chloride detection

Zhang, Zhangmin, Hu, Jie, Wang, Yangyang, Shi, Ruichao, Ma, Yuwei, Huang, Haoliang, Wang, Hao, Wei, Jiangxiong and Yu, Qijun. 2021. "Relationship between microstructure of AgCl film and electrochemical behavior of Ag|AgCl electrode for chloride detection." Corrosion Science. 184, pp. 1-12. https://doi.org/10.1016/j.corsci.2021.109393

Corrosion behavior of the reinforcement in chloride-contaminated alkali-activated fly ash pore solution

Zhang, Zhangmin, Chen, Rui, Hu, Jie, Wang, Yangyang, Huang, Haoliang, Ma, Yuwei, Zhang, Zuhua, Wang, Hao, Yin, Suhong, Wei, Jiangxiong and Yu, Qijun. 2021. "Corrosion behavior of the reinforcement in chloride-contaminated alkali-activated fly ash pore solution." Composites Part B: Engineering. 224, pp. 1-14. https://doi.org/10.1016/j.compositesb.2021.109215

Design and fabrication of paper-based stretchable sensor for respiration monitoring

Shivakumar Shagle, Nishith, Nguyen, Thanh, Vu, Trung-Hieu, Nguyen, Hung, Phan, Hoang-Phuong, Dau, Van, Song, Pingan, Wang, Hao, Nguyen, Nam-Trung, Dao, Dzung and Dinh, Toan. 2021. "Design and fabrication of paper-based stretchable sensor for respiration monitoring." 20th IEEE Sensors (SENSORS 2021). Virtual 31 Oct - 04 Nov 2021 United States. https://doi.org/10.1109/SENSORS47087.2021.9639648

Surface-Mounted Distributed Fiber Optic Sensor Measurements, and Concrete Damaged Plasticity Modeling for Damage Analysis of Reinforced Concrete Beams

Jayawickrema, U. M. N., Kumar, A. S., Herath, H. M. C. M., Hettiarachchi, N. K., Sooriyaarachchi, H. P. and Epaarachchi, J. A.. 2021. "Surface-Mounted Distributed Fiber Optic Sensor Measurements, and Concrete Damaged Plasticity Modeling for Damage Analysis of Reinforced Concrete Beams." ASME 2021 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS2021). United States and Online United States. https://doi.org/10.1115/SMASIS2021-67524

Green and Facile Synthesis of Bio-Based, Flame-Retardant, Latent Imidazole Curing Agent for Single-Component Epoxy Resin

Wang, Jingsheng, Huo, Siqi, Wang, Jun, Yang, Shuang, Chen, Kaiwen, Li, Chang, Fang, De, Fang, Zhengping, Song, Pingan and Wang, Hao. 2022. "Green and Facile Synthesis of Bio-Based, Flame-Retardant, Latent Imidazole Curing Agent for Single-Component Epoxy Resin ." ACS Applied Polymer Materials. 4 (5), pp. 3564-3574. https://doi.org/10.1021/acsapm.2c00138

Electrochemical CO2 reduction in membrane-electrode assemblies

Ge, Lei, Rabiee, Hesamoddin, Li, Mengran, Subramanian, Siddhartha, Zheng, Yao, Lee, Joong Hee, Burdyny, Thomas and Wang, Hao. 2022. "Electrochemical CO2 reduction in membrane-electrode assemblies." Chem. 8 (3), pp. 663-692. https://doi.org/10.1016/j.chempr.2021.12.002

A Si-containing polyphosphoramide via green chemistry for fire-retardant polylactide with well-preserved mechanical and transparent properties

Feng, Jiabing, Ma, Zhewen, Xu, Zhiguang, Xie, Hongyan, Lu, Yixia, Maluk, Cristian, Song, Pingan, Bourbigot, Serge and Wang, Hao. 2021. "A Si-containing polyphosphoramide via green chemistry for fire-retardant polylactide with well-preserved mechanical and transparent properties." Chemical Engineering Journal. 431 (Part 3), pp. 1-13. https://doi.org/10.1016/j.cej.2021.134259

In-situ performance evaluation of large shape memory polymer components via distributed optical fibre sensors

Herath, Madhubhashitha, Emmanuel, Chris, Epaarachchi, Jayantha and Jeewantha, Janitha. 2021. "In-situ performance evaluation of large shape memory polymer components via distributed optical fibre sensors." 10th International Conference on Information and Automation for Sustainability (ICIAfS 2021). Negambo, Sri Lanka 11 - 13 Aug 2021 United States. https://doi.org/10.1109/ICIAfS52090.2021.9605868

Development and characterization of shape memory polymers for non-invasive biomedical applications

Jeewantha, Janitha, Emmanuel, Chris, Herath, Madhubhashitha, Islam, Mainul and Epaarachchi, Jayantha. 2021. "Development and characterization of shape memory polymers for non-invasive biomedical applications." ASME 2021 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS2021). United States and Online New York, United States. https://doi.org/10.1115/SMASIS2021-66024

Shape memory polymer composites and their smart structural applications

Herath, Madhubhashitha and Epaarachchi, Jayantha. 2021. "Shape memory polymer composites and their smart structural applications." Low, It-Meng and Dong, Yu (ed.) Composite materials: manufacturing, properties and applications. Netherlands. Elsevier. pp. 581-610

Kinetics and mechanism of synergistic adsorption and persulfate activation by N-doped porous carbon for antibiotics removals in single and binary solutions

Tian, Wenjie, Lin, Jingkai, Zhang, Huayang, Duan, Xiaoguang, Wang, Hao, Sun, Hongqi and Wang, Shaobin. 2022. "Kinetics and mechanism of synergistic adsorption and persulfate activation by N-doped porous carbon for antibiotics removals in single and binary solutions." Journal of Hazardous Materials. 423 (Part A), pp. 1-8. https://doi.org/10.1016/j.jhazmat.2021.127083

Microstructure and melting properties of Ag–Cu–In intermediate-temperature brazing alloys

Ma, Xue, Li, Liang-Feng, Zhang, Zu-Hua, Wang, Hao, Wang, En-Ze and Qiu, Tai. 2015. "Microstructure and melting properties of Ag–Cu–In intermediate-temperature brazing alloys." Rare Metals. 34 (5), pp. 324-328. https://doi.org/10.1007/s12598-015-0484-7

Interfacial effect of Cu electrode enhanced energy density of amorphous aluminum oxide dielectric capacitor

Yao, Manwen, Li, Chunyu, Su, Zhen, Li, Zaifang, Wang, Hao and Yao, Xi. 2020. "Interfacial effect of Cu electrode enhanced energy density of amorphous aluminum oxide dielectric capacitor." Journal of Alloys and Compounds. 855, pp. 1-8. https://doi.org/10.1016/j.jallcom.2020.157473

Hydration mechanisms and durability of hybrid alkaline cements (HACs): A review

Xue, Lili, Zhang, Zuhua and Wang, Hao. 2020. "Hydration mechanisms and durability of hybrid alkaline cements (HACs): A review." Construction and Building Materials. 266, pp. 1-14. https://doi.org/10.1016/j.conbuildmat.2020.121039

Early hydration kinetics and microstructure development of hybrid alkali activated cements (HAACs) at room temperature

Xue, Lili, Zhang, Zuhua and Wang, Hao. 2021. "Early hydration kinetics and microstructure development of hybrid alkali activated cements (HAACs) at room temperature." Cement and Concrete Composites. 123, pp. 1-11. https://doi.org/10.1016/j.cemconcomp.2021.104200

Surface characteristics and electrochemical behaviors of passive reinforcing steel in alkali-activated slag

Wang, Yangyang, Chen, Rui, Hu, Jie, Zhang, Zhangmin, Huang, Haoliang, Ma, Yuwei, Wei, Jiangxiong, Zhang, Zuhua, Yin, Suhong, Wang, Hao and Yu, Qijun. 2021. "Surface characteristics and electrochemical behaviors of passive reinforcing steel in alkali-activated slag." Corrosion Science. 190, pp. 1-12. https://doi.org/10.1016/j.corsci.2021.109657

Ruthenium single atoms implanted continuous MoS2-Mo2C heterostructure for high-performance and stable water splitting

Hoa, Van Hien, Tran, Duy Thanh, Prabhakaran, Sampath, Kim, Do Hwan, Hameed, Nishar, Wang, Hao, Kim, Nam Hoon and Lee, Joong Hee. 2021. "Ruthenium single atoms implanted continuous MoS2-Mo2C heterostructure for high-performance and stable water splitting." Nano Energy. 88, pp. 1-11. https://doi.org/10.1016/j.nanoen.2021.106277

Enhancing the performance of basic magnesium sulfate cement-based coral aggregate concrete through gradient composite design technology

Chu, Yingjie, Wang, Aiguo, Zhu, Yingcan, Wang, Hao, Liu, Kaiwei, Ma, Rui, Guo, Liping and Sun, Daosheng. 2021. "Enhancing the performance of basic magnesium sulfate cement-based coral aggregate concrete through gradient composite design technology." Composites Part B: Engineering. 227, pp. 1-13. https://doi.org/10.1016/j.compositesb.2021.109382

Chloride diffusion in alkali-activated fly ash/slag concretes: Role of slag content, water/binder ratio, alkali content and sand-aggregate ratio

Zhang, Jingxiao, Ma, Yuwei, Zheng, Jiazheng, Hu, Jie, Fu, Jiyang, Zhang, Zuhua and Wang, Hao. 2020. "Chloride diffusion in alkali-activated fly ash/slag concretes: Role of slag content, water/binder ratio, alkali content and sand-aggregate ratio." Construction and Building Materials. 261, pp. 1-12. https://doi.org/10.1016/j.conbuildmat.2020.119940

Photoelectrochemical Water Oxidation and Longevous Photoelectric Conversion by a Photosystem II Electrode

Tian, Wenjie, Zhang, Huayang, Sibbons, Jane, Sun, Hongqi, Wang, Hao and Wang, Shaobin. 2021. "Photoelectrochemical Water Oxidation and Longevous Photoelectric Conversion by a Photosystem II Electrode." Advanced Energy Materials. 11 (30), pp. 1-13. https://doi.org/10.1002/aenm.202100911

Enhanced removals of micropollutants in binary organic systems by biomass derived porous carbon/peroxymonosulfate

Tian, Wenjie, Lin, Jingkai, Zhang, Huayang, Duan, Xiaoguang, Sun, Hongqi, Wang, Hao and Wang, Shaobin. 2020. "Enhanced removals of micropollutants in binary organic systems by biomass derived porous carbon/peroxymonosulfate." Journal of Hazardous Materials. 408, pp. 1-10. https://doi.org/10.1016/j.jhazmat.2020.124459

Comprehensive evaluation of the piezoresistive behavior of carbon nanotube-based composite strain sensors

Tang, Zhen-Hua, Li, Yuan-Qing, Huang, Pei, Wang, Hao, Hu, Ning and Fu, Shao-Yun. 2021. "Comprehensive evaluation of the piezoresistive behavior of carbon nanotube-based composite strain sensors." Composites Science and Technology. 208, pp. 1-8. https://doi.org/10.1016/j.compscitech.2021.108761

Fire safety of composites in prefabricated buildings: From fibre reinforced polymer to textile reinforced concrete

Nguyen, Kate T.Q., Navaratnam, Satheeskumar, Mendis, Priyan, Zhang, Kevin, Barnett, Jonathan and Wang, Hao. 2020. "Fire safety of composites in prefabricated buildings: From fibre reinforced polymer to textile reinforced concrete." Composites Part B: Engineering. 187, pp. 1-12. https://doi.org/10.1016/j.compositesb.2020.107815

Optimization on the piezoresistivity of alkali-activated fly ash/slag mortar by using conductive aggregates and carbon fibers

Ma, Yuwei, Liu, Weisen, Hu, Jie, Fu, Jiyang, Zhang, Zuhua and Wang, Hao. 2020. "Optimization on the piezoresistivity of alkali-activated fly ash/slag mortar by using conductive aggregates and carbon fibers." Cement and Concrete Composites. 114, pp. 1-14. https://doi.org/10.1016/j.cemconcomp.2020.103735

Current applications of poly(lactic acid) composites in tissue engineering and drug delivery

Liu, Shan, Qin, Shuhao, He, Min, Zhou, Dengfeng, Qin, Qingdong and Wang, Hao. 2020. "Current applications of poly(lactic acid) composites in tissue engineering and drug delivery." Composites Part B: Engineering. 199, pp. 1-25. https://doi.org/10.1016/j.compositesb.2020.108238

Co/Co6Mo6C@C nanoreactors derived from ZIF-67 composite for higher alcohols synthesis

Li, Fuping, Li, Jiaquan, Wang, Kai, Ao, Min, Qiu, Jieshan, Zhang, Xiwang, Wang, Hao, Pham, Gia Hung and Liu, Shaomin. 2021. "Co/Co6Mo6C@C nanoreactors derived from ZIF-67 composite for higher alcohols synthesis." Composites Part B: Engineering. 209, pp. 1-9. https://doi.org/10.1016/j.compositesb.2021.108608

Impact Properties of the Chemically Treated Hemp Fibre Reinforced Polyester Composites

Kabir, Mohammad Mazedul, Al-Haik, Mohammad Yousef, Aldajah, Saud Hamad, Lau, Kin Tak and Wang, Hao. 2020. "Impact Properties of the Chemically Treated Hemp Fibre Reinforced Polyester Composites." Fibers and Polymers. 21 (9), pp. 2098-2110. https://doi.org/10.1007/s12221-020-9630-4

Dopant-Free Hole Transport Materials Based on a Large Conjugated Electron-Deficient Core for Efficient Perovskite Solar Cells

Hai, Jiefeng, Wu, Hao, Yin, Xinxing, Song, Jiaxing, Hu, Lin, Jin, Yingzhi, Li, Ling, Su, Zhen, Xu, Zhiguang and Wang, Hao. 2021. "Dopant-Free Hole Transport Materials Based on a Large Conjugated Electron-Deficient Core for Efficient Perovskite Solar Cells." Advanced Functional Materials. 31 (51), pp. 1-8. https://doi.org/10.1002/adfm.202105458

New development of ultra-high-performance concrete (UHPC)

Du, Jiang, Meng, Weina, Khayat, Kamal H., Bao, Yi, Guo, Pengwei, Lyu, Zhenghua, Abu-obeidah, Adi, Nassif, Hani and Wang, Hao. 2021. "New development of ultra-high-performance concrete (UHPC)." Composites Part B: Engineering. 224, pp. 1-31. https://doi.org/10.1016/j.compositesb.2021.109220

Sc and Ta-doped SrCoO3-δ perovskite as a high-performance cathode for solid oxide fuel cells

Xu, Xiaoyong, Zhao, Jie, Li, Mengran, Zhuang, Linzhou, Zhang, Jinxuan, Aruliah, Sathia, Liang, Fengli, Wang, Hao and Zhu, Zhonghua. 2019. "Sc and Ta-doped SrCoO3-δ perovskite as a high-performance cathode for solid oxide fuel cells." Composites Part B: Engineering. 178, pp. 1-7. https://doi.org/10.1016/j.compositesb.2019.107491

Pultruded GFRP square hollow columns with bolted sleeve joints under eccentric compression

Xie, Lei, Bai, Yu, Qi, Yujun and Wang, Hao. 2019. "Pultruded GFRP square hollow columns with bolted sleeve joints under eccentric compression." Composites Part B: Engineering. 162, pp. 274-282. https://doi.org/10.1016/j.compositesb.2018.11.001

Geopolymer, green alkali activated cementitious material: Synthesis, applications and challenges

Wu, Yanguang, Lu, Bowen, Bai, Tao, Wang, Hao, Du, Feipeng, Zhang, Yunfei, Cai, Lu, Jiang, Can and Wang, Wenjun. 2019. "Geopolymer, green alkali activated cementitious material: Synthesis, applications and challenges." Construction and Building Materials. 224, pp. 930-949. https://doi.org/10.1016/j.conbuildmat.2019.07.112

A biomimetic multifunctional electronic hair sensor

Liu, Ya-Feng, Huang, Pei, Li, Yuan-Qing, Liu, Qun, Tao, Jiang-Ke, Xiong, De-Jian, Hu, Ning, Yan, Cheng, Wang, Hao and Fu, Shao-Yun. 2018. "A biomimetic multifunctional electronic hair sensor." Journal of Materials Chemistry A. 7 (4), pp. 1889 - 1896. https://doi.org/10.1039/c8ta10750e

Welan gum retards the hydration of calcium sulfoaluminate

Zhang, Yu, Zhang, Zuhua, Li, Weifeng, Wang, Hao and Shen, Xiaodong. 2017. "Welan gum retards the hydration of calcium sulfoaluminate." Journal of Thermal Analysis and Calorimetry: an international forum for thermal studies. 130 (2), pp. 899-908. https://doi.org/10.1007/s10973-017-6427-9

Acid‐activated and WOx‐loaded montmorillonite catalysts and their catalytic behaviors in glycerol dehydration

Yu, Weihua, Wang, Pengpeng, Zhou, Chunhui, Zhao, Hanbin, Tong, Dongshen, Zhang, Hao, Yang, Huimin, Ji, Shengfu and Wang, Hao. 2017. "Acid‐activated and WOx‐loaded montmorillonite catalysts and their catalytic behaviors in glycerol dehydration." Chinese Journal of Catalysis. 38 (6), pp. 1087-1100. https://doi.org/10.1016/S1872-2067(17)62813-4

Cobalt hollow nanospheres: controlled synthesis, modification and highly catalytic performance for hydrolysis of ammonia borane

Wei, Wangya, Wang, Zumin, Xu, Jie, Zong, Lingbo, Zhao, Kun, Wang, Hao, Li, Haiyan and Yu, Ranbo. 2017. "Cobalt hollow nanospheres: controlled synthesis, modification and highly catalytic performance for hydrolysis of ammonia borane." Science Bulletin. 62 (5), pp. 326-331. https://doi.org/10.1016/j.scib.2017.01.012

Highly active CeO2 hollow-shell spheres with Al doping

Wang, Zumin, Jiang, Shuaiyu, Li, Yanhui, Xu, Pengfei, Zhao, Kun, Zong, Lingbo, Wang, Hao and Yu, Ranbo. 2017. "Highly active CeO2 hollow-shell spheres with Al doping." Science China Materials. 60 (7), pp. 646-653. https://doi.org/10.1007/s40843-017-9042-0

Improved thermal stability of polyethylene with rare earth trifluoromethanesulfonate

Ran, Shiya, Guo, Zhenghong, Fang, Zhengping, Li, Juan and Wang, Hao. 2018. "Improved thermal stability of polyethylene with rare earth trifluoromethanesulfonate." Composites Communications. 8, pp. 19-23. https://doi.org/10.1016/j.coco.2018.03.001

A nitrogen-doped electrocatalyst from metal–organic framework-carbon nanotube composite

Ge, Lei, Lin, Rijia, Zhu, Zhonghua and Wang, Hao. 2018. "A nitrogen-doped electrocatalyst from metal–organic framework-carbon nanotube composite." Journal of Materials Research. 33 (5), pp. 538-545. https://doi.org/10.1557/jmr.2017.416

Experimental and Theoretical Deflections of Hybrid Composite Sandwich Panel under Four-point Bending Load

Fajrin, J., Zhuge, Y., Wang, H. and Bullen, F.. 2017. "Experimental and Theoretical Deflections of Hybrid Composite Sandwich Panel under Four-point Bending Load." Civil Engineering Dimension. 19 (1), pp. 29-35. https://doi.org/10.9744/CED.19.1.29-35

The structural behavior of hybrid structural insulated panels under pure bending load

Fajrin, Jauhar, Zhuge, Yan, Bullen, Frank and Wang, Hao. 2017. "The structural behavior of hybrid structural insulated panels under pure bending load." International Journal of Technology. 8 (5), pp. 777-788. https://doi.org/10.14716/ijtech.v8i5.861

Fabric Parameter Effect on the Mechanical Properties of Woven Hemp Fabric Reinforced Composites as an Alternative to Wood Products

Misnon, I. M., Islam, M. M., Epaarachchi, J. A., Lau, K. T. and Wang, H.. 2016. "Fabric Parameter Effect on the Mechanical Properties of Woven Hemp Fabric Reinforced Composites as an Alternative to Wood Products." Advance Research in Textile Engineering. 1 (1).

Flexural behaviour of hybrid sandwich panel with natural fiber composites as the intermediate layer

Fajrin, Jauhar, Zhuge, Yan, Bullen, Frank and Wang, Hao. 2016. "Flexural behaviour of hybrid sandwich panel with natural fiber composites as the intermediate layer." Journal of Mechanical Engineering and Sciences. 10 (2), pp. 1968-1983. https://doi.org/10.15282/jmes.10.2.2016.3.0187

Construction of multilayer coatings for flame retardancy of ramie fabric using layer-by-layer assembly

Yan, Hongqiang, Zhao, Li, Fang, Zhengping and Wang, Hao. 2017. "Construction of multilayer coatings for flame retardancy of ramie fabric using layer-by-layer assembly." Journal of Applied Polymer Science. 134 (48), pp. 1-11. https://doi.org/10.1002/app.45556

Application of poly(diphenolic acid-phenyl phosphate)-based layer by layer nanocoating in flame retardant ramie fabrics

Yan, Hongqiang, Li, Nannan, Fang, Zhengping and Wang, Hao. 2017. "Application of poly(diphenolic acid-phenyl phosphate)-based layer by layer nanocoating in flame retardant ramie fabrics." Journal of Applied Polymer Science. 134 (20), pp. 1-13. https://doi.org/10.1002/app.44795

Microwave plasma rapid heating towards robust cathode/electrolyte interface for solid oxide fuel cells

Liang, Fengli, Tseng, Po-hung, Sun, Qiang, Li, Mengran, Zhou, Wei, Liu, Lian X., Wang, Hao and Zhu, Zhonghua. 2022. "Microwave plasma rapid heating towards robust cathode/electrolyte interface for solid oxide fuel cells." Journal of Colloid and Interface Science. 607 (Part 1), pp. 53-60. https://doi.org/10.1016/j.jcis.2021.08.182

Multi-attribute parametric optimisation of shape memory polymer properties for adaptive orthopaedic plasters

Jeewantha, L. H. J., Emmanuel, K. D. C., Herath, H. M. C. M., Islam, M. M., Fang, L. and Epaarachchi, J. A.. 2022. "Multi-attribute parametric optimisation of shape memory polymer properties for adaptive orthopaedic plasters." Materialia. 21, pp. 1-12. https://doi.org/10.1016/j.mtla.2022.101325

Effect of hemp fibre surface treatment on the fibre-matrix interface and the influence of cellulose, hemicellulose and lignin contents on composite strength properties

Kabir, Mohammad Mazedul, Alhaik, Mohammad Yousef, Aldajah, Saud Hamad, Lau, Kin Tak, Wang, Hao and Islam, Md Mainul. 2021. "Effect of hemp fibre surface treatment on the fibre-matrix interface and the influence of cellulose, hemicellulose and lignin contents on composite strength properties." Advances in Materials Science and Engineering. 2021, pp. 1-17. https://doi.org/10.1155/2021/9753779

Fresh and hardened properties of alkali-activated fly ash/slag binders: effect of fly ash source, surface area, and additives

Wang, Yanru, Cao, Yubin, Ma, Yuwei, Xiao, Shanshan, Hu, Jie and Wang, Hao. 2021. "Fresh and hardened properties of alkali-activated fly ash/slag binders: effect of fly ash source, surface area, and additives." Journal of Sustainable Cement-Based Materials. https://doi.org/10.1080/21650373.2021.1932637

Turning sandstone clay into supplementary cementitious material: activation and pozzolanic reactivity evaluation

Cao, Yubin, Wang, Yanru, Zhang, Zuhua, Ma, Yuwei and Wang, Hao. 2021. "Turning sandstone clay into supplementary cementitious material: activation and pozzolanic reactivity evaluation." Composites Part B: Engineering. 223, pp. 1-12. https://doi.org/10.1016/j.compositesb.2021.109137

Recent progress of utilization of activated kaolinitic clay in cementitious construction materials

Cao, Yubin, Wang, Yanru, Zhang, Zuhua, Ma, Yuwei and Wang, Hao. 2021. "Recent progress of utilization of activated kaolinitic clay in cementitious construction materials." Composites Part B: Engineering. 211, pp. 1-19. https://doi.org/10.1016/j.compositesb.2021.108636

Dynamic Nanoconfinement Enabled Highly Stretchable and Supratough Polymeric Materials with Desirable Healability and Biocompatibility

Liu, Lei, Zhu, Menghe, Xu, Xiaodong, Ma, Zhewen, Jiang, Zhen, Pich, Andrij, Wang, Hao, Song, Pingan and Li, X.. 2021. "Dynamic Nanoconfinement Enabled Highly Stretchable and Supratough Polymeric Materials with Desirable Healability and Biocompatibility." Advanced Materials. 33 (51), pp. 1-11. https://doi.org/10.1002/adma.202105829

Plant Fibers, their Composites, and Applications

Rangappa, Sanjay Mavinkere, Parameswaranpillai, Jyotishkumar, Siengchin, Suchart, Ozbakkaloglu, Togay and Wang, Hao. Rangappa, Sanjay Mavinkere, Parameswaranpillai, Jyotishkumar, Siengchin, Suchart, Ozbakkaloglu, Togay and Wang, Hao (ed.) 2022. Plant Fibers, their Composites, and Applications. India. Springer.

Introduction to plant fibers and their composites

Rangappa, Sanjay Mavinkere, Puttegowda, Madhu, Parameswaranpillai, Jyotishkumar, Siengchin, Suchart, Ozbakkaloglu, Ozbakkaloglu, Togay and Wang, Hao. 2022. "Introduction to plant fibers and their composites." Rangappa, Sanjay Mavinkere, Parameswaranpillai, Jyotishkumar, Siengchin, Suchart, Ozbakkaloglu, Togay and Wang, Hao (ed.) Plant Fibers, their Composites, and Applications. India. Elsevier. pp. 1-24

Non-thermal plasma enhances performances of biochar in wastewater treatment and energy storage applications

Zhou, Rusen, Wang, Xiaoxiang, Zhou, Renwu, Weerasinghe, Janith, Zhang, Tianqi, Xin, Yanbin, Wang, Hao, Cullen, Patrick, Wang, Hongxia and Ostrikov, Kostya Ken. 2022. "Non-thermal plasma enhances performances of biochar in wastewater treatment and energy storage applications." Frontiers of Chemical Science and Engineering. 16 (4), pp. 475-483. https://doi.org/10.1007/s11705-021-2070-x

Sulfate radical-based advanced oxidation processes for water decontamination using biomass-derived carbon as catalysts

Tian, Wenjie, Chen, Si, Zhang, Huayang, Wang, Hao and Wang, Shaobin. 2022. "Sulfate radical-based advanced oxidation processes for water decontamination using biomass-derived carbon as catalysts." Current Opinion In Chemical Engineering. 37. https://doi.org/10.1016/j.coche.2022.100838

PEDOT:PSS and Its Composites for Flexible Supercapacitors

Su, Zhen, Jin, Yingzhi, Wang, Hongmei, Li, Zaifang, Huang, Liang and Wang, Hao. 2022. "PEDOT:PSS and Its Composites for Flexible Supercapacitors." ACS Applied Energy Materials. 5 (10), pp. 11915-11932. https://doi.org/10.1021/acsaem.2c01524

Fire safety performance of 3D GFRP nanocomposite as a cladding material

Soufeiani, Leila, Nguyen, Kate.T.Q., White, Nathan, Foliente, Greg, Wang, Hao and Aye, Lu. 2022. "Fire safety performance of 3D GFRP nanocomposite as a cladding material." Fire Safety Journal. 133. https://doi.org/10.1016/j.firesaf.2022.103670

Interface modulation induced by the 1T Co-WS2 shell nanosheet layer at the metallic NiTe2/Ni core–nanoskeleton: Glib electrode-kinetics for HER, OER, and ORR

Paudel, Dasu Ram, Pan, Uday Narayan, Ghising, Ram Babu, Dhakal, Purna Prasad, Dinh, Van An, Wang, Hao, Kim, Nam Hoon and Lee, Joong Hee. 2022. "Interface modulation induced by the 1T Co-WS2 shell nanosheet layer at the metallic NiTe2/Ni core–nanoskeleton: Glib electrode-kinetics for HER, OER, and ORR." Nano Energy. 102. https://doi.org/10.1016/j.nanoen.2022.107712

State-of-the-art review of product stewardship strategies for large composite wind turbine blades

Martinez-Marquez, Daniel, Florin, Nick, Hall, Wayne, Majewski, Peter, Wang, Hao and Stewart, Rodney A.. 2022. "State-of-the-art review of product stewardship strategies for large composite wind turbine blades." Resources, Conservation and Recycling Advances. 15. https://doi.org/10.1016/j.rcradv.2022.200109

Functional Carbon Nitride Materials in Photo-Fenton-Like Catalysis for Environmental Remediation

Lin, Jingkai, Tian, Wenjie, Guan, Zheyu, Zhang, Huayang, Duan, Xiaoguang, Wang, Hao, Sun, Hongqi, Fang, Yanfen, Huang, Yingping and Wang, Shaobin. 2022. "Functional Carbon Nitride Materials in Photo-Fenton-Like Catalysis for Environmental Remediation." Advanced Functional Materials. 32 (24). https://doi.org/10.1002/adfm.202201743

Carbon nitride-based Z-scheme heterojunctions for solar-driven advanced oxidation processes

Lin, Jingkai, Tian, Wenjie, Zhang, Huayang, Duan, Xiaoguang, Sun, Hongqi, Wang, Hao, Fang, Yanfen, Huang, Yingping and Wang, Shaobin. 2022. "Carbon nitride-based Z-scheme heterojunctions for solar-driven advanced oxidation processes." Journal of Hazardous Materials. 434. https://doi.org/10.1016/j.jhazmat.2022.128866

Numerical Study of an Improved Non-Circular MC Fuelled with H/Air for Thermo-Photovoltaic (TPV) Applications

Ayad, Kakei A., Khdher, Abdolbaqi Mohammed, Albazzaz, Kamal Jalal Tawfeeq, Kakahy, Amer Najat Najmaldeen, Abdulkarim, Ali Hussein and Epaarachchi, Jayantha. 2022. "Numerical Study of an Improved Non-Circular MC Fuelled with H/Air for Thermo-Photovoltaic (TPV) Applications." Mathematical Modelling of Engineering Problems. 9 (4), pp. 897-905. https://doi.org/10.18280/mmep.090406

A phosphorus/silicon-based, hyperbranched polymer for high-performance, fire-safe, transparent epoxy resins

Shi, Qui, Huo, Siqi, Wang, Cheng, Ye, Guofeng, Yu, Lingfeng, Fang, Zhengping, Wang, Hao and Liu, Zhitian. 2022. "A phosphorus/silicon-based, hyperbranched polymer for high-performance, fire-safe, transparent epoxy resins." Polymer Degradation and Stability. 203, pp. 1-12. https://doi.org/10.1016/j.polymdegradstab.2022.110065

A phosphaphenanthrene-benzimidazole derivative for enhancing fire safety of epoxy resins

Xu, Yixiang, Wang, Junjie, Zhang, Wenbin, Huo, Siqi, Fang, Zhengping, Song, Pingan, Wang, Dong and Wang, Hao. 2022. "A phosphaphenanthrene-benzimidazole derivative for enhancing fire safety of epoxy resins." Reactive and Functional Polymers. 180, pp. 1-9. https://doi.org/10.1016/j.reactfunctpolym.2022.105390

Phenylboronic acid-decorated ZrP nanosheets for enhancing fire resistance, smoke suppression, and water/acid/alkali tolerance of intumescent coatings

Wang, Cheng, Huo, Siqi, Ye, Guofeng, Shi, Qui, Fang, Zhengping, Wang, Hao and Liu, Zhitian. 2022. "Phenylboronic acid-decorated ZrP nanosheets for enhancing fire resistance, smoke suppression, and water/acid/alkali tolerance of intumescent coatings." Colloids and Surfaces A: Physicochemical and Engineering Aspects. 655. https://doi.org/10.1016/j.colsurfa.2022.130292

Flame-retardant single-component epoxy resin cured by benzimidazolyl-substituted cyclotriphosphazene: Storage stability, curing behaviors and flame retardancy

Hu, Ben, Wang, Jun, Wang, Jingsheng, Yang, Shuang, Li, Chang, Wang, Fengyi, Huo, Siqi, Song, Pingan, Fang, Zhengping and Wang, Hao. 2022. "Flame-retardant single-component epoxy resin cured by benzimidazolyl-substituted cyclotriphosphazene: Storage stability, curing behaviors and flame retardancy." Polymer Degradation and Stability. 204. https://doi.org/10.1016/j.polymdegradstab.2022.110092

Corrigendum to ’A phosphorus/silicon-based, hyperbranched polymer for high-performance, fire-safe, transparent epoxy resins’ [Polymer Degradation and Stability, 203 (2022) 110065]

Shi, Qiu, Huo, Siqi, Wang, Cheng, Ye, Guofeng, Yu, Lingfeng, Fang, Zhengping, Wang, Hao and Liu, Zhitian. 2022. "Corrigendum to ’A phosphorus/silicon-based, hyperbranched polymer for high-performance, fire-safe, transparent epoxy resins’ [Polymer Degradation and Stability, 203 (2022) 110065]." Polymer Degradation and Stability. 204. https://doi.org/10.1016/j.polymdegradstab.2022.110105

Utilization of fibers in ultra-high performance concrete: A review

Gong, Jihao, Ma, Yuwei, Fu, Jiyang, Hu, Jie, Ouyang, Xiaowei, Zhang, Zuhua and Wang, Hao. 2022. "Utilization of fibers in ultra-high performance concrete: A review ." Composites Part B: Engineering. 241, pp. 1-22. https://doi.org/10.1016/j.compositesb.2022.109995

Sulphate resistance of one-part geopolymer synthesized by calcium carbide residue-sodium carbonate-activation of slag

Yang, Tao, Gao, Xuan, Zhang, Jiajia, Zhuang, Xumin, Wang, Hao and Zhang, Zuhua. 2022. "Sulphate resistance of one-part geopolymer synthesized by calcium carbide residue-sodium carbonate-activation of slag ." Composites Part B: Engineering. 242, pp. 1-14. https://doi.org/10.1016/j.compositesb.2022.110024

Chloride binding behavior of synthesized reaction products in alkali-activated slag

Cai, Weixi, Xu, Zhipeng, Zhang, Zhangmin, Hu, Jie, Huang, Haoliang, Ma, Yuwei, Zhang, Zuhua, Wang, Hao, Yin, Suhong, Wei, Jiangxiong, Shi, Caijun and Yu, Qijun. 2022. "Chloride binding behavior of synthesized reaction products in alkali-activated slag ." Composites Part B: Engineering. 238, pp. 1-19. https://doi.org/10.1016/j.compositesb.2022.109919

Review on chloride transport in alkali-activated materials: Role of precursors, activators and admixtures

Zhang, Jingxiao, Ma, Yuwei, Hu, Jie, Wang, Hao and Zhang, Zuhua. 2022. "Review on chloride transport in alkali-activated materials: Role of precursors, activators and admixtures ." Construction and Building Materials. 328, pp. 1-24. https://doi.org/10.1016/j.conbuildmat.2022.127081

Recycled sand from sandstone waste: A new source of high-quality fine aggregate

Cao, Yubin, Wang, Yanru, Zhang, Zuhua and Wang, Hao. 2022. "Recycled sand from sandstone waste: A new source of high-quality fine aggregate ." Resources, Conservation and Recycling. 179, pp. 1-11. https://doi.org/10.1016/j.resconrec.2021.106116

Alkali leaching features of 3-year-old alkali activated fly ash-slag-silica fume: For a better understanding of stability

Zhu, Yingcan, Longhi, Marlon A., Wang, Aiguo, Hou, Dongshuai, Wang, Hao and Zhang, Zuhua. 2022. "Alkali leaching features of 3-year-old alkali activated fly ash-slag-silica fume: For a better understanding of stability ." Composites Part B: Engineering. 230, pp. 1-12. https://doi.org/10.1016/j.compositesb.2021.109469

Drying shrinkage behavior of hybrid alkali activated cement (HAAC) mortars

Xue, Lili, Zhang, Zuhua, Liu, Hongfei, Jiang, Yuanhai and Wang, Hao. 2022. "Drying shrinkage behavior of hybrid alkali activated cement (HAAC) mortars ." Construction and Building Materials. 316, pp. 1-9. https://doi.org/10.1016/j.conbuildmat.2021.126068

Cyanate esters as a high performing shape memory polymer: A review

Jayalath, H.T.S., Herath, Madhubhashitha and Epaarachchi, Jayantha. 2022. "Cyanate esters as a high performing shape memory polymer: A review." 3rd International Conference on Aspects of Materials Science and Engineering (ICAMSE2022). Chandigarh, India 04 - 05 Mar 2022 Netherlands. Elsevier. https://doi.org/10.1016/j.matpr.2022.02.121

Fire Intumescent, High-Temperature Resistant, Mechanically Flexible Graphene Oxide Network for Exceptional Fire Shielding and Ultra-Fast Fire Warning

Cao, Cheng-fei, Yu, Bin, Chen, Zuan-Yu, Qu, Yong-Xiang, Li, Yu-Tong, Shi, Yongqian, Ma, Zhewen, Sun, Feng-Na, Pan, Qing‑Hua, Tang, Long-Cheng, Song, Pingan and Wang, Hao. 2022. "Fire Intumescent, High-Temperature Resistant, Mechanically Flexible Graphene Oxide Network for Exceptional Fire Shielding and Ultra-Fast Fire Warning." Nano-Micro Letters. 14 (1). https://doi.org/10.1007/s40820-022-00837-1

Effects of Ligands in Rare Earth Complex on Properties, Functions, and Intelligent Behaviors of Polyurea–Urethane Composites

Zhou, Lu, Yang, Hongwei, Zhang, Zhen, Liu, Yue, Epaarachchi, Jayantha, Fang, Zhenggang, Fang, Liang, Lu, Chunhua and Xu, Zhongzi. 2022. "Effects of Ligands in Rare Earth Complex on Properties, Functions, and Intelligent Behaviors of Polyurea–Urethane Composites." Polymer. 14 (10), pp. 1-16. https://doi.org//10.3390/polym14102098

Effect of dispersion time for nanoparticles in DGEBA shape memory polymer composite fabrication

Islam, Mainul. 2022. "Effect of dispersion time for nanoparticles in DGEBA shape memory polymer composite fabrication." Sapuan, S. M. et al. (ed.) International Symposium on Polymeric Materials 2022 (ISPM2022). Malaysia 14 - 15 Jun 2022 Malaysia.

Evaluating the temperature and glass fibre reinforcement effects on the damping properties of the shape memory polymers

Al Azzawi, Wessam, Epaarachchi, Jayantha A. and Leng, Jinsong. 2017. "Evaluating the temperature and glass fibre reinforcement effects on the damping properties of the shape memory polymers." 21st International Conference on Composite Materials (ICCM-21). Xi’an, China 20 - 25 Aug 2017 China.

Carbon fibre reinforced shape memory polymer composites for deployable space habitats

Herath, H. M. C. M., Epaarachchi, J. A., Islam, M. M. and Leng, J.. 2019. "Carbon fibre reinforced shape memory polymer composites for deployable space habitats." Engineer: Journal of the Institution of Engineers. LII (1), pp. 1-9. https://doi.org/10.4038/engineer.v52i1.7323

Bioinspired, Strong, and Tough Nanostructured Poly(vinyl alcohol)/Inositol Composites: How Hydrogen-Bond Cross-Linking Works?

Xu, Xiaodong, Li, Lujuan, Seraji, Seyed Mohsen, Liu, Lei, Jiang, Zhen, Xu, Zhiguang, Li, Xin, Zhao, Sheng, Wang, Hao and Song, Pingan. 2020. "Bioinspired, Strong, and Tough Nanostructured Poly(vinyl alcohol)/Inositol Composites: How Hydrogen-Bond Cross-Linking Works?" Macromolecules. 54 (20), pp. 9510-9521. https://doi.org/10.1021/acs.macromol.1c01725

Strong, Ultrafast, Reprogrammable Hydrogel Actuators with Muscle-Mimetic Aligned Fibrous Structures

Jiang, Zhen, Seraji, Seyed Mohsen, Tan, Xiao, Zhang, Xinxing, Dinh, Toan, Mollazade, Mahdie, Rowan, Alan E, Whittaker, Andrew K, Song, Pingan and Wang, Hao. 2021. "Strong, Ultrafast, Reprogrammable Hydrogel Actuators with Muscle-Mimetic Aligned Fibrous Structures." Chemistry of Materials. 33 (19), pp. 7818-7828. https://doi.org/10.1021/acs.chemmater.1c02312

Bioinspired, Highly Adhesive, Nanostructured Polymeric Coatings for Superhydrophobic Fire-Extinguishing Thermal Insulation Foam

Ma, Zhewen, Liu, Xiaochen, Xu, Xiaodong, Liu, Lei, Yu, Bin, Maluk, Cristian, Huang, Guobo, Wang, Hao and Song, Pingan. 2021. "Bioinspired, Highly Adhesive, Nanostructured Polymeric Coatings for Superhydrophobic Fire-Extinguishing Thermal Insulation Foam." ACS Nano. 15 (7), pp. 11667-11680. https://doi.org/10.1021/acsnano.1c02254

Functionalizing MXene towards highly stretchable, ultratough, fatigue- and fire-resistant polymer nanocomposites

Liu, Lei, Zhu, Menghe, Shi, Yongqian, Xu, Xiaodong, Ma, Zhewen, Yu, Bin, Fu, Shenyuan, Huang, Guobo, Wang, Hao and Song, Pingan. 2021. "Functionalizing MXene towards highly stretchable, ultratough, fatigue- and fire-resistant polymer nanocomposites." Chemical Engineering Journal. 424, pp. 1-13. https://doi.org/10.1016/j.cej.2021.130338

Multifunctional polyurethane sponge coatings with excellent flame retardant, antibacterial, compressible, and recyclable properties

Liu, Chengwei, Zhang, Tao, Luo, Yuxin, Wang, Yixuan, Li, Jiacheng, Ye, Ting, Guo, Ruifeng, Song, Pingan, Zhou, Jiu and Wang, Hao. 2021. "Multifunctional polyurethane sponge coatings with excellent flame retardant, antibacterial, compressible, and recyclable properties." Composites Part B: Engineering. 215, pp. 1-10. https://doi.org/10.1016/j.compositesb.2021.108785

Lightweight high-performance carbon-polymer nanocomposites for electromagnetic interference shielding

Liu, Shan, Qin, Shuhao, Jiang, Yue, Song, Pingan and Wang, Hao. 2021. "Lightweight high-performance carbon-polymer nanocomposites for electromagnetic interference shielding." Composites Part A: Applied Science and Manufacturing. 145, pp. 1-30. https://doi.org/10.1016/j.compositesa.2021.106376

Insights into the hydrogen-bond cross-linking effects of small multiamine molecules on physical and mechanical properties of poly(vinly alcohol) by molecular dynamics simulations

Li, Lujuan, Xu, Xiaodong, Song, Pingan, Cao, Qianqian, Qiao, Xin, Xu, Zhiguang, Yang, Yang, Zuo, Chuncheng and Wang, Hao. 2021. "Insights into the hydrogen-bond cross-linking effects of small multiamine molecules on physical and mechanical properties of poly(vinly alcohol) by molecular dynamics simulations." Modelling and Simulation in Materials Science and Engineering. 29 (3), pp. 1-15. https://doi.org/10.1088/1361-651X/abe0aa

Stretchable strain sensors with dentate groove structure for enhanced sensing recoverability

Cui, Xihua, Jiang, Yue, Xu, Zhiguang, Xi, Man, Jiang, Yang, Song, Pingan, Zhao, Yan and Wang, Hao. 2021. "Stretchable strain sensors with dentate groove structure for enhanced sensing recoverability." Composites Part B: Engineering. 211, pp. 1-10. https://doi.org/10.1016/j.compositesb.2021.108641

A highly fire-safe and smoke-suppressive single-component epoxy resin with switchable curing temperature and rapid curing rate

Yang, Shuang, Huo, Siqi, Wang, Jun, Zhang, Bin, Wang, Jingsheng, Ran, Shiya, Fang, Zhengping, Song, Pingan and Wang, Hao. 2021. "A highly fire-safe and smoke-suppressive single-component epoxy resin with switchable curing temperature and rapid curing rate." Composites Part B: Engineering. 207, pp. 1-11. https://doi.org/10.1016/j.compositesb.2020.108601

Water governs the mechanical properties of poly(vinyl alcohol)

Li, Lujuan, Xu, Xiaodong, Liu, Lei, Song, Pingan, Cao, Qianqian, Xu, Zhiguang, Fang, Zhengping and Wang, Hao. 2021. "Water governs the mechanical properties of poly(vinyl alcohol)." Polymer. 213, pp. 1-12. https://doi.org/10.1016/j.polymer.2020.123330

Engineering MXene surface with POSS for reducing fire hazards of polystyrene with enhanced thermal stability

Yu, Bin, Yuen, Anthony Chun Yin, Xu, Xiaodong, Zhang, Zhen-Cheng, Yang, Wei, Lu, Hongdian, Fei, Bin, Yeoh, Guan Heng, Song, Pingan and Wang, Hao. 2021. "Engineering MXene surface with POSS for reducing fire hazards of polystyrene with enhanced thermal stability." Journal of Hazardous Materials. 401, pp. 1-13. https://doi.org/10.1016/j.jhazmat.2020.123342

Transparent, highly thermostable and flame retardant polycarbonate enabled by rod-like phosphorous-containing metal complex aggregates

Sai, Ting, Ran, Shiya, Guo, Zhenghong, Yan, Hongqiang, Zhang, Yan, Wang, Hao, Song, Pingan and Fang, Zhengping. 2021. "Transparent, highly thermostable and flame retardant polycarbonate enabled by rod-like phosphorous-containing metal complex aggregates." Chemical Engineering Journal. 409, pp. 1-15. https://doi.org/10.1016/j.cej.2020.128223

Failure analysis and design of grouted fibre-composite repair system for corroded steel pipes

Shamsuddoha, Md, Manalo, Allan, Aravinthan, Thiru, Islam, Md Mainul and Djukic, Luke. 2021. "Failure analysis and design of grouted fibre-composite repair system for corroded steel pipes." Engineering Failure Analysis. 119, pp. 1-15. https://doi.org/10.1016/j.engfailanal.2020.104979

Thermomechanical and fire performance of DGEBA based shape memory polymer composites for constructions

Emmanuel, K. D. C., Herath, H. M. C. M., Jeewantha, L. H. J., Epaarachchi, J. A. and Aravinthan, T.. 2021. "Thermomechanical and fire performance of DGEBA based shape memory polymer composites for constructions." Construction and Building Materials. 303. https://doi.org/10.1016/j.conbuildmat.2021.124442

Stand-alone asymmetric hollow fiber gas-diffusion electrodes with distinguished bronze phases for high-efficiency CO2 electrochemical reduction

Rabiee, Hesamoddin, Ge, Lei, Zhang, Xueqin, Hu, Shihu, Li, Mengran, Smart, Simon, Zhu, Zhonghua, Wang, Hao and Yuan, Zhiguo. 2021. "Stand-alone asymmetric hollow fiber gas-diffusion electrodes with distinguished bronze phases for high-efficiency CO2 electrochemical reduction." Applied Catalysis B: Environment and Energy. 298, pp. 1-11. https://doi.org/10.1016/j.apcatb.2021.120538

The controllable synthesis of urchin-shaped hierarchical superstructure MOFs with high catalytic activity and stability

Wang, Zhanke, Ge, Lei, Zhang, Guangxu, Chen, Yao, Gao, Rongrong, Wang, Hao and Zhu, Zhonghua. 2021. "The controllable synthesis of urchin-shaped hierarchical superstructure MOFs with high catalytic activity and stability." Chemical Communications. 57 (70), pp. 8758-8761. https://doi.org/10.1039/d1cc03547a

Improved enzymatic activity by oriented immobilization on graphene oxide with tunable surface heterogeneity

Zhou, Wenfeng, Rao, Yuan, Zhuang, Wei, Ge, Lei, Lin, Rijia, Tang, Ting, Wu, Jinglan, Li, Ming, Yang, Pengpeng, Zhu, Chenjie, Wang, Hao and Ying, Hanjie. 2021. "Improved enzymatic activity by oriented immobilization on graphene oxide with tunable surface heterogeneity." Composites Part B: Engineering. 216. https://doi.org/10.1016/j.compositesb.2021.108788

High‐performance perovskite composite electrocatalysts enabled by controllable interface engineering

Xu, Xiaomin, Pan, Yangli, Ge, Lei, Chen, Yubo, Mao, Xin, Guan, Daqin, Li, Mengran, Zhong, Yijun, Hu, Zhiwei, Peterson, Vanessa K., Saunders, Martin, Chen, Chien‐Te, Zhang, Haijuan, Ran, Ran, Du, Aijun, Wang, Hao, Jiang, San Ping, Zhou, Wei and Shao, Zongping. 2021. "High‐performance perovskite composite electrocatalysts enabled by controllable interface engineering." Small. 17 (29), pp. 1-10. https://doi.org/10.1002/smll.202101573

Phosphorus-containing flame retardant epoxy thermosets: Recent advances and future perspectives

Huo, Siqi, Song, Pingan, Yu, Bin, Ran, Shiya, Chevali, Venkata, Liu, Lei, Fang, Zhengping and Wang, Hao. 2021. "Phosphorus-containing flame retardant epoxy thermosets: Recent advances and future perspectives." Progress in Polymer Science. 114, pp. 1-36. https://doi.org/10.1016/j.progpolymsci.2021.101366

Crystal Facet Engineering of Copper-Based Metal−Organic Frameworks with Inorganic Modulators

Wang, Zhanke, Ge, Lei, Feng, Desheng, Jiang, Zongrui, Wang, Hao, Li, Mengran, Lin, Rijia and Zhu, Zhonghua. 2021. "Crystal Facet Engineering of Copper-Based Metal−Organic Frameworks with Inorganic Modulators." Crystal Growth and Design. 21 (2), pp. 926-934. https://doi.org/10.1016/j.jssc.2021.122031

Phase changes under efflorescence in alkali activated materials with mixed activators

Srinivasamurthy, Lakshmikanth, Chevali, Venkata S., Zhang, Zuhua and Wang, Hao. 2021. "Phase changes under efflorescence in alkali activated materials with mixed activators." Construction and Building Materials. 283, pp. 1-13. https://doi.org/10.1016/j.conbuildmat.2021.122678

Development of Smart Materials for Invasive Medical Applications Using Shape Memory Polymers

Jeewantha, Lama Hewage Janitha, Islam, Md Mainul and Epaarachchi, Jayantha Ananda. 2020. "Development of Smart Materials for Invasive Medical Applications Using Shape Memory Polymers." 6th International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE 2020). Khulna, Bangladesh 19 - 21 Dec 2020 Bangladesh.

One-Pot, Solvent- and Catalyst-Free Synthesis of Polyphosphoramide as an Eco-Benign and Effective Flame Retardant for Poly(lactic acid)

Feng, Jiabing, Xu, Xiaodong, Xu, Zhiguang, Xie, Hongyan, Song, Pingan, Li, Lujuan, Huang, Guobo and Wang, Hao. 2020. "One-Pot, Solvent- and Catalyst-Free Synthesis of Polyphosphoramide as an Eco-Benign and Effective Flame Retardant for Poly(lactic acid)." ACS Sustainable Chemistry and Engineering. 8 (44), pp. 16612-16623. https://doi.org/10.1021/acssuschemeng.0c05931

Flame retardant polymeric nanocomposites through the combination of nanomaterials and conventional flame retardants

He, Wentao, Song, Pingan, Yu, Bin, Fang, Zhengping and Wang, Hao. 2020. "Flame retardant polymeric nanocomposites through the combination of nanomaterials and conventional flame retardants." Progress in Materials Science. 114, pp. 1-49. https://doi.org/10.1016/j.pmatsci.2020.100687

Polyphosphoramide-intercalated MXene for simultaneously enhancing the thermal stability, flame retardancy and mechanical properties of polylactide

Xue, Yijiao, Feng, Jiabing, Huo, Siqi, Song, Pingan, Yu, Bin, Liu, Lei and Wang, Hao. 2020. "Polyphosphoramide-intercalated MXene for simultaneously enhancing the thermal stability, flame retardancy and mechanical properties of polylactide." Chemical Engineering Journal. 397, pp. 1-11. https://doi.org/10.1016/j.cej.2020.125336

Deposition growth of Zr-based MOFs on cerium phenylphosphonate lamella towards enhanced thermal stability and fire safety of polycarbonate

Sai, Ting, Ran, Shiya, Guo, Zhenghong, Yan, Hongqiang, Zhang, Yan, Song, Pingan, Zhang, Tao, Wang, Hao and Fang, Zhengping. 2020. "Deposition growth of Zr-based MOFs on cerium phenylphosphonate lamella towards enhanced thermal stability and fire safety of polycarbonate." Composites Part B: Engineering. 197, pp. 1-12. https://doi.org/10.1016/j.compositesb.2020.108064

Synthesis and Properties Investigation of Thiophene-aromatic Polyesters: Potential Alternatives for the 2,5-Furandicarboxylic Acid-based Ones

Wang, Jing-Gang, Zhang, Xiao-Qing, Sheng, Ang, Zhu, Jin, Song, Ping-An, Wang, Hao and Liu, Xiao-Qing. 2020. "Synthesis and Properties Investigation of Thiophene-aromatic Polyesters: Potential Alternatives for the 2,5-Furandicarboxylic Acid-based Ones." Chinese Journal of Polymer Science. 38, pp. 1082-1091. https://doi.org/10.1007/s10118-020-2438-2

Monitoring Structural Performances of Concrete Beams Using Fibre Bragg Grating (FBG) Sensors

Jayawickrema, U. M. N., Epaarachchi, J. A., Hettiarachchi, N. K., Jeewantha, L. H. J. and Herath, H. M. C. M.. 2019. "Monitoring Structural Performances of Concrete Beams Using Fibre Bragg Grating (FBG) Sensors." 10th International Conference on Structural Engineering and Construction Management (ICSECM 2019). Kandy, Sri Lanka 12 - 14 Dec 2019

Flexural Analysis for Syntactic Foam Sandwich Panels

Salleh, Zulzamri, Islam, M., Epaarachchi, J., Zulkarnain, M. and Ahmed, Yaseen Adenan. 2020. "Flexural Analysis for Syntactic Foam Sandwich Panels." Saw, Chun Lin, Woo, Tze Keong, Singh, Salvinder Singh a/l Karam and Salim, Didi Asmara Bin (ed.) Regional Conference on Marine and Mechanical Engineering (ReMME'18). Ipoh, Malaysia 07 - 09 Nov 2018 Singapore. https://doi.org/10.1007/978-981-15-0002-2_5

Behaviour of continuous fibre composite sandwich core under low-velocity impact

Zangana, Sartip, Epaarachchi, Jayantha, Ferdous, Wahid, Leng, Jinsong and Schubel, Peter. 2021. "Behaviour of continuous fibre composite sandwich core under low-velocity impact." Thin-Walled Structures. 158, pp. 1-11. https://doi.org/10.1016/j.tws.2020.107157

Lignin-derived bio-based flame retardants toward high-performance sustainable polymeric materials

Yang, Haitang, Yu, Bin, Xu, Xiaodong, Bourbigot, Serge, Wang, Hao and Song, Pingan. 2020. "Lignin-derived bio-based flame retardants toward high-performance sustainable polymeric materials." Green Chemistry. 22 (7), pp. 2129-2161. https://doi.org/10.1039/D0GC00449A

Manipulating interphase reactions for mechanically robust, flame-retardant and sustainable polylactide biocomposites

Xu, Xiaodong, Dai, Jinfeng, Ma, Zhewen, Liu, Lina, Zhang, Xinghong, Liu, Hongzhi, Tang, Long-Cheng, Huang, Guobo, Wang, Hao and Song, Pingan. 2020. "Manipulating interphase reactions for mechanically robust, flame-retardant and sustainable polylactide biocomposites." Composites Part B: Engineering. 190, pp. 1-15. https://doi.org/10.1016/j.compositesb.2020.107930

Grafting Lignin with Bioderived Polyacrylates for Low-Cost, Ductile, and Fully Biobased Poly(lactic acid) Composite

Sun, Yiqi, Ma, Zhewen, Xu, Xiaodong, Liu, Xiaohuan, Liu, Lina, Huang, Guobo, Liu, Lei, Wang, Hao and Song, Pingan. 2020. "Grafting Lignin with Bioderived Polyacrylates for Low-Cost, Ductile, and Fully Biobased Poly(lactic acid) Composite." ACS Sustainable Chemistry and Engineering. 8 (5), pp. 2267-2276. https://doi.org/10.1021/acssuschemeng.9b06593

Realizing simultaneous improvements in mechanical strength, flame retardancy and smoke suppression of ABS nanocomposites from multifunctional graphene

Huang, Guobo, Huo, Siqi, Xu, Xiaodong, Chen, Wei, Jin, Yanxian, Li, Rongrong, Song, Pingan and Wang, Hao. 2019. "Realizing simultaneous improvements in mechanical strength, flame retardancy and smoke suppression of ABS nanocomposites from multifunctional graphene." Composites Part B: Engineering. 177, pp. 1-10. https://doi.org/10.1016/j.compositesb.2019.107377

Surface-coating engineering for flame retardant flexible polyurethane foams: A critical review

Yang, Haitang, Yu, Bin, Song, Pingan, Maluk, Cristian and Wang, Hao. 2019. "Surface-coating engineering for flame retardant flexible polyurethane foams: A critical review." Composites Part B: Engineering. 176, pp. 1-14. https://doi.org/10.1016/j.compositesb.2019.107185

Synthesis of decorated graphene with P, N-containing compounds and its flame retardancy and smoke suppression effects on polylactic acid

Ran, Shiya, Fang, Fang, Guo, Zhenghong, Song, Pingan, Cai, Yingfeng, Fang, Zhengping and Wang, Hao. 2019. "Synthesis of decorated graphene with P, N-containing compounds and its flame retardancy and smoke suppression effects on polylactic acid." Composites Part B: Engineering. 170, pp. 41-50. https://doi.org/10.1016/j.compositesb.2019.04.037

Improved flame resistance and thermo-mechanical properties of epoxy resin nanocomposites from functionalized graphene oxide via self-assembly in water

Fang, Fang, Ran, Shiya, Fang, Zhengping, Song, Pingan and Wang, Hao. 2019. "Improved flame resistance and thermo-mechanical properties of epoxy resin nanocomposites from functionalized graphene oxide via self-assembly in water." Composites Part B: Engineering. 165, pp. 406-416. https://doi.org/10.1016/j.compositesb.2019.01.086

One-pot scalable fabrication of an oligomeric phosphoramide towards high-performance flame retardant polylactic acid with a submicron-grained structure

Xue, Yijiao, Shen, Mingxia, Zheng, Yifei, Tao, Wenzhu, Han, Yanxin, Li, Weidong, Song, Pingan and Wang, Hao. 2020. "One-pot scalable fabrication of an oligomeric phosphoramide towards high-performance flame retardant polylactic acid with a submicron-grained structure." Composites Part B: Engineering. 183, pp. 1-12. https://doi.org/10.1016/j.compositesb.2019.107695

A bio-based ionic complex with different oxidation states of phosphorus for reducing flammability and smoke release of epoxy resins

Fang, Fang, Huo, Siqi, Shen, Haifeng, Ran, Shiya, Wang, Hao, Song, Pingan and Fang, Zhengping. 2020. "A bio-based ionic complex with different oxidation states of phosphorus for reducing flammability and smoke release of epoxy resins." Composites Communications. 17, pp. 104-108. https://doi.org/10.1016/j.coco.2019.11.011

High‐performance polymeric materials through hydrogen‐bond cross‐linking

Song, Pingan and Wang, Hao. 2020. "High‐performance polymeric materials through hydrogen‐bond cross‐linking." Advanced Materials. 32 (18). https://doi.org/10.1002/adma.201901244

Engineering Interfaces toward High-Performance Polypropylene/Coir Fiber Biocomposites with Enhanced Friction and Wear Behavior

Liu, Lina, Wang, Zhenyu, Yu, Youming, Fu, Shenyuan, Nie, Yujing, Wang, Hao and Song, Pingan. 2019. "Engineering Interfaces toward High-Performance Polypropylene/Coir Fiber Biocomposites with Enhanced Friction and Wear Behavior." ACS Sustainable Chemistry and Engineering. 7 (22), pp. 18453-18462. https://doi.org/10.1021/acssuschemeng.9b04381

Effect of thickness on the shape memory properties of bisphenol a epoxy based shape memory polymer composites

Emmanue, K. D. C., Jeewantha, J., Herath, M., Epaarachchi J. and Aravinthan T.. 2021. "Effect of thickness on the shape memory properties of bisphenol a epoxy based shape memory polymer composites." ASME 2021 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS2021). United States and Online United States. https://doi.org/10.1115/SMASIS2021-67111

Mechanical and thermal properties of glass fiber–vinyl ester resin composite for pipeline repair exposed to hot-wet conditioning

Shamsuddoha, Md, Djukic, Luke P., Islam, Md Mainul, Aravinthan, Thiru and Manalo, Allan. 2017. "Mechanical and thermal properties of glass fiber–vinyl ester resin composite for pipeline repair exposed to hot-wet conditioning." Journal of Composite Materials. 51 (11), pp. 1605-1617. https://doi.org/10.1177/0021998316661869

Recent Progress in Shape Memory Polymers in Biomedical Applications

Jeewantha, Lama Hewage Janitha, Islam, Md Mainul and Epaarachchi, Jayantha Amanda. 2019. "Recent Progress in Shape Memory Polymers in Biomedical Applications." Yang, Richard, Zhang, Leo, Zhao, Ming, Fang, Gu and Islam, Rafiqul (ed.) 1st International Conference on Mechanical and Manufacturing Engineering Research and Practice (iCMMERP-2019). Sydney, Australia 24 - 28 Nov 2019 Sydney, Australia.

Light activated shape memory polymers and composites: A review

Herath, Madhubhashitha, Epaarachchi, Jayantha, Islam, Mainul, Fang, Liang and Leng, Jinsong. 2020. "Light activated shape memory polymers and composites: A review." European Polymer Journal. 136, pp. 1-27. https://doi.org/10.1016/j.eurpolymj.2020.109912

Effects of Different Relative Humidities on Flax Fibers prior to Manufacturing Their Composites Based on the Shear Response

Moudood, Abdul, Rahman, Anisur, Ochsner, Andreas, Islam, Md Mainul, Ali, Mohammad Yeakub and Francucci, Gaston. 2020. "Effects of Different Relative Humidities on Flax Fibers prior to Manufacturing Their Composites Based on the Shear Response." Advances in Materials Science and Engineering. 2020, pp. 1-7. https://doi.org/10.1155/2020/4785970

Enhanced toughness of PLLA/PCL blends using poly(d-lactide)-poly(ε-caprolactone)-poly(d-lactide) as compatibilizer

Xiao, Xianglian, Chevali, Venkata S., Song, Pingan, Yu, Bin, Yang, Yihu and Wang, Hao. 2020. "Enhanced toughness of PLLA/PCL blends using poly(d-lactide)-poly(ε-caprolactone)-poly(d-lactide) as compatibilizer." Composites Communications. 21, pp. 1-6. https://doi.org/10.1016/j.coco.2020.100385

Mechanical properties of flax fiber‐reinforced composites at different relative humidities: Experimental, geometric, and displacement potential function approaches

Moudood, Abdul, Rahman, Anisur, Huq, Nayeem Md Lutful, Ochsner, Andreas, Islam, Md Mainul and Francucci, Gaston. 2020. "Mechanical properties of flax fiber‐reinforced composites at different relative humidities: Experimental, geometric, and displacement potential function approaches." Polymer Composites. 41 (12), pp. 4963-4973. https://doi.org/10.1002/pc.25766

Performance investigation of two AE source location techniques on a Planar Multilayer Structure

Hassan, Md. Mehedi, Khan, Md. Tawhidul Islam, Hasemura, Yuji and Islam, Md. Mainul. 2020. "Performance investigation of two AE source location techniques on a Planar Multilayer Structure." International Journal of Acoustics and Vibration. 25 (2), pp. 226-235. https://doi.org/10.20855/ijav.2020.25.21635

Direct evidence of boosted oxygen evolution over perovskite by enhanced lattice oxygen participation

Pan, Yangli, Xu, Xiaomin, Zhong, Yijun, Ge, Lei, Chen, Yubo, Veder, Jean-Pierre Marcel, Guan, Daqin, O’Hayre, Ryan, Li, Mengran, Wang, Guoxiong, Wang, Hao, Zhou, Wei and Shao, Zongping. 2020. "Direct evidence of boosted oxygen evolution over perovskite by enhanced lattice oxygen participation." Nature Communications. 11, pp. 1-10. https://doi.org/10.1038/s41467-020-15873-x

Current status of carbon fibre and carbon fibre composites recycling

Zhang, Jin, Chevali, Venkata S., Wang, Hao and Wang, Chun-Hui. 2020. "Current status of carbon fibre and carbon fibre composites recycling." Composites Part B: Engineering. 193, pp. 1-15. https://doi.org/10.1016/j.compositesb.2020.108053

Performance of rare earth organic complexes based light activated shape memory polymer composites

Herath, Madhubhashitha, Epaarachchi, Jayantha, Islam, Mainul, Fang, Liang, Zhang, Fenghua and Leng, Jinsong. 2019. "Performance of rare earth organic complexes based light activated shape memory polymer composites." 22nd International Conference on Composite Materials (ICCM-22). Melbourne, Australia 11 - 16 Aug 2019 Australia.

Remote actuation of light activated shape memory polymers via D-shaped optical fibres

Herath, Madhubhashitha, Epaarachchi, Jayantha, Islam, Mainul, Zhang, Fenghua, Leng, Jinsong, Fang, Liang, Yan, Cheng, Peng, Gang Ding and Schade, Wolfgang. 2020. "Remote actuation of light activated shape memory polymers via D-shaped optical fibres." Smart Materials and Structures. 29 (4), pp. 1-8. https://doi.org/10.1088/1361-665X/ab72ea

4D printed shape memory polymer composite structures for deployable small spacecrafts

Herath, Madhubhashitha, Islam, Mainul, Epaarachchi, Jayantha, Zhang, Fenghua and Leng, Jinsong. 2019. "4D printed shape memory polymer composite structures for deployable small spacecrafts." ASME 2019 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS 2019). Louisville, United States 09 - 11 Sep 2019 United States. https://doi.org/10.1115/SMASIS2019-5583

Mechanical properties and thermomechanical behaviour of poly (ethylene-co-vinyl acetate) based shape memory polymer composites

Herath, M., James, G. and Epaarachchi, J.. 2019. "Mechanical properties and thermomechanical behaviour of poly (ethylene-co-vinyl acetate) based shape memory polymer composites." 13th International Conference on the Mechanical Behaviour of Materials (ICM13). Melbourne, Australia 11 - 14 Jun 2019 Melbourne, Australia.

A novel hybridised composite sandwich core with glass, kevlar and zylon fibres – investigation under low-velocity impact

Zanagan, Sartip, Epaarachchi, Jayantha, Ferdous, Wahid and Leng, Jinsong. 2020. "A novel hybridised composite sandwich core with glass, kevlar and zylon fibres – investigation under low-velocity impact." International Journal of Impact Engineering. 137, pp. 1-10. https://doi.org/10.1016/j.ijimpeng.2019.103430

Enhanced thermoelectric properties of nanostructured n-type Bi2Te3 by suppressing Te vacancy through non-equilibrium fast reaction

Wang, Yuan, Liu, Wei-Di, Shi, XIao-Lei, Hong, Min, Wang, Li-Jun, Li, Meng, Wang, Hao, Zou, Jin and Chen, Zhi-Gang. 2020. "Enhanced thermoelectric properties of nanostructured n-type Bi2Te3 by suppressing Te vacancy through non-equilibrium fast reaction." Chemical Engineering Journal. 391. https://doi.org/10.1016/j.cej.2019.123513

Development of a new calcium sulfoaluminate (synthetic ye'elimite) blended PII 52.5 cement

Zhang, Yu, Zhang, Zuhua, Shi, Chaoqi, Wang, Hao and Shen, Xiaodong. 2017. "Development of a new calcium sulfoaluminate (synthetic ye'elimite) blended PII 52.5 cement." Advances in Cement Research. 29 (9), pp. 373-386. https://doi.org/10.1680/jadcr.17.00027

Accurate determination of the 'time-zero' of autogenous shrinkage in alkali-activated fly ash/slag system

Ma, Y., Yang, X., Hu, J., Zhang, Z. and Wang, H.. 2019. "Accurate determination of the 'time-zero' of autogenous shrinkage in alkali-activated fly ash/slag system." Composites Part B: Engineering. 177, pp. 1-8. https://doi.org/10.1016/j.compositesb.2019.107367

Near infrared light activated shape memory polymer composite for space applications

Herath, Madhubhashitha, Epaarachchi, Jayantha, Islam, Mainul and Leng, Jinsong. 2018. "Near infrared light activated shape memory polymer composite for space applications." Wang, Hao (ed.) 11th Asian-Australasian Conference on Composite Materials (ACCM-11). Cairns, Australia 29 Jul - 01 Aug 2018

Compression and flexural properties of ground macadamia nutshell particulate composites

Bode, Rajesh Reddy, Islam, Md Mainul and Mahmood, Muhammad Nateque. 2018. "Compression and flexural properties of ground macadamia nutshell particulate composites." Wang, Hao (ed.) 11th Asian-Australasian Conference on Composite Materials (ACCM-11). Cairns, Australia 29 Jul - 01 Aug 2018

Microstructure and wear characteristics of ATZ ceramic particle reinforced gray iron matrix surface composites

Ma, Xue, Li, Liang-feng, Zhang, Fan, Zhang, Zu-hua, Wang, Hao and Wang, En-ze. 2018. "Microstructure and wear characteristics of ATZ ceramic particle reinforced gray iron matrix surface composites." China Foundry. 15 (3), pp. 167-172. https://doi.org/10.1007/s41230-018-7211-6

New selective dissolution process to quantify reaction extent and product stability in metakaolin-based geopolymers

Longhi, Marlon, Walkley, Brant, Rodriguez, Erich D, Kirchheim, Ana P, Zhang, Zuhua and Wang, Hao. 2019. "New selective dissolution process to quantify reaction extent and product stability in metakaolin-based geopolymers." Composites Part B: Engineering. 176 (1). https://doi.org/10.1016/j.compositesb.2019.107172

Polylactide/hemp hurd biocomposites as sustainable 3D printing feedstock

Xiao, Xianglian, Chevali, Venkata S., Song, Pingan, He, Dongning and Wang, Hao. 2019. "Polylactide/hemp hurd biocomposites as sustainable 3D printing feedstock." Composites Science and Technology. 184, pp. 1-8. https://doi.org/10.1016/j.compscitech.2019.107887

Efflorescence of alkali-activated cements (geopolymers) and the impacts on material structures: A critical analysis

Longhi, Marlon, Zhang, Zuhua, Rodriguez, Erich, Kirchheim, Ana and Wang, Hao. 2019. "Efflorescence of alkali-activated cements (geopolymers) and the impacts on material structures: A critical analysis." Frontiers in Materials. 6, pp. 1-13. https://doi.org/10.3389/fmats.2019.00089

A review on mixture design methods for geopolymer concrete

Li, Ning, Shi, Caijun, Zhang, Zuhua, Wang, Hao and Liu, Yiwei. 2019. "A review on mixture design methods for geopolymer concrete." Composites Part B: Engineering. 178, pp. 1-14. https://doi.org/10.1016/j.compositesb.2019.107490

Light-induced rare earth organic complex/shape-memory polymer composites with high strength and luminescence based on hydrogen bonding

Wang, Hangning, Fang, Liang, Zhang, Zhen, Epaarachchi, Jayantha, Li, Lingyu, Hu, Xin, Lu, Chunhua and Xu, Zhongzi. 2019. "Light-induced rare earth organic complex/shape-memory polymer composites with high strength and luminescence based on hydrogen bonding." Composites Part A: Applied Science and Manufacturing. 125, pp. 1-9. https://doi.org/10.1016/j.compositesa.2019.105525

Effects of selectively triggered photothermal particles on shape memory polymer composites: an investigation on structural performance, thermomechanical characteristics and photothermal behaviour

Herath, Madhubhashitha, Epaarachchi, Jayantha, Islam, Mainul, Yan, Cheng, Zhang, Fenghua and Leng, Jinsong. 2019. "Effects of selectively triggered photothermal particles on shape memory polymer composites: an investigation on structural performance, thermomechanical characteristics and photothermal behaviour." Journal of Intelligent Material Systems and Structures. 30 (20), pp. 3124-3135. https://doi.org/10.1177/1045389X19879998

Modeling, analysis, and testing of viscoelastic properties of shape memory polymer composites and a brief review of their space engineering applications

Al Azzawi, Wessam, Herath, Madhubhashitha and Epaarachchi, Jayantha. 2019. "Modeling, analysis, and testing of viscoelastic properties of shape memory polymer composites and a brief review of their space engineering applications." Guedes, Rui Miranda (ed.) Creep and fatigue in polymer matrix composites. United Kingdom. Woodhead Publishing Limited. pp. 465-495

Water absorption and chloride diffusivity of concrete under the coupling effect of uniaxial compressive load and freeze-thaw cycles

Wang, Yanru, Cao, Yubin, Zhang, Peng, Ma, Yuwei, Zhao, Tiejun, Wang, Hao and Zhang, Zuhua. 2019. "Water absorption and chloride diffusivity of concrete under the coupling effect of uniaxial compressive load and freeze-thaw cycles." Construction and Building Materials. 209, pp. 566-576. https://doi.org/10.1016/j.conbuildmat.2019.03.091

Fatigue crack analysis of ferrite material by acoustic emission technique

Khan, Md. T. I., Rashid, A. A., Hidaka, R., Hattori, N. and Islam, Md. M.. 2019. "Fatigue crack analysis of ferrite material by acoustic emission technique." Journal of Mechanical Engineering and Sciences. 13 (2), pp. 5074-5089. https://doi.org/10.15282/jmes.13.2.2019.21.0418

Thermo-mechanical properties of fused borosilicate syntactic foams

Salleh, Z., Islam, M. M., Epaarachchi, J. A. and Khan, M. T. I.. 2019. "Thermo-mechanical properties of fused borosilicate syntactic foams." Journal of Mechanical Engineering and Sciences. 13 (2), pp. 4898-4910. https://doi.org/10.15282/jmes.13.2.2019.10.0407

High Porosity in Nanostructured n-Type Bi2Te3 Obtaining Ultralow Lattice Thermal Conductivity

Wang, Yuan, Liu, Wei-Di, Gao, Han, Wang, Li-Jun, Li, Meng, Shi, Xiao-Lei, Hong, Min, Wang, Hao, Zou, Jin and Chen, Zhi-Gang. 2019. "High Porosity in Nanostructured n-Type Bi2Te3 Obtaining Ultralow Lattice Thermal Conductivity ." ACS Applied Materials and Interfaces. 11 (34), pp. 31237-31244. https://doi.org/10.1021/acsami.9b12079

An investigation on the student performance in first year fundamental engineering course, Engineering Statics

Islam, Md Mainul and Epaarachchi, Jayantha Ananda. 2018. "An investigation on the student performance in first year fundamental engineering course, Engineering Statics." Educational Research Applications. 2018 (01), pp. 1-5. https://doi.org/10.29011/2575-7032/100044

Flax fiber and its composites: an overview of water and moisture absorption impact on their performance

Moudood, Abul, Rahman, Anisur, Ochsner, Andreas, Islam, Mainul and Francucci, Gaston. 2019. "Flax fiber and its composites: an overview of water and moisture absorption impact on their performance." Journal of Reinforced Plastics and Composites. 38 (7), pp. 323-339. https://doi.org/10.1177/0731684418818893

Sediment color tool for targeting arsenic-safe aquifers for the installation of shallow drinking water tubewells

Hossain, Mohammed, Bhattacharya, Prosun, Frape, Shaun K., Jacks, Gunnar, Islam, M. Mainul, Rahman, M. Moklesur, von Bromssen, Mattias, Hasan, M. Aziz and Ahmed, Kazi Matin. 2014. "Sediment color tool for targeting arsenic-safe aquifers for the installation of shallow drinking water tubewells." Science of the Total Environment. 493, pp. 615-625. https://doi.org/10.1016/j.scitotenv.2014.05.064

Effect of drying procedures on pore structure and phase evolution of alkali-activated cements

Zhang, Zuhua, Zhu, Yingcan, Zhu, Huajun, Zhang, Yu, Provis, John L. and Wang, Hao. 2019. "Effect of drying procedures on pore structure and phase evolution of alkali-activated cements." Cement and Concrete Composites. 96, pp. 194-203. https://doi.org/10.1016/j.cemconcomp.2018.12.003

Fire-resistant, strong and green polymer nanocomposites based on poly(lactic acid) and core-shell nanofibrous flame retardants

Feng, Jiabin, Sun, Yiqi, Song, Pingan, Lei, Weiwei, Wu, Qiang, Liu, Lina, Yu, Youming and Wang, Hao. 2017. "Fire-resistant, strong and green polymer nanocomposites based on poly(lactic acid) and core-shell nanofibrous flame retardants." ACS Sustainable Chemistry and Engineering. 5 (9), pp. 7894-7904. https://doi.org/10.1021/acssuschemeng.7b01430

Orientated growth of copper-based MOF for acetylene storage

Wang, Zhanke, Ge, Lei, Li, Mengran, Lin, Rijia, Wang, Hao and Zhu, Zhonghua. 2019. "Orientated growth of copper-based MOF for acetylene storage." Chemical Engineering Journal. 357, pp. 320-327. https://doi.org/10.1016/j.cej.2018.09.148

Bioinspired design of strong, tough, and thermally stable polymeric materials via nanoconfinement

Song, Pingan, Dai, Jinfeng, Chen, Guorong, Yu, Youming, Fang, Zhengping, Lei, Weiwei, Fu, Shenyuan, Wang, Hao and Chen, Zhi-Gang. 2018. "Bioinspired design of strong, tough, and thermally stable polymeric materials via nanoconfinement." ACS Nano. 12 (9), pp. 9266-9278. https://doi.org/10.1021/acsnano.8b04002

Fabrication of flame retardant benzoxazine semi-biocomposites reinforced by ramie fabrics with bio-based flame retardant coating

Yan, Hongqiang, Li, Nannan, Cheng, Jie, Song, Pingan, Fang, Zhengping and Wang, Hao. 2018. "Fabrication of flame retardant benzoxazine semi-biocomposites reinforced by ramie fabrics with bio-based flame retardant coating." Polymer Composites. 39 (Special issue), pp. E480-E488. https://doi.org/10.1002/pc.24617

Thermal expansion properties of fused borosilicate syntactic foams

Salleh, Zulzamri, Islam, Md Mainul and Epaarachchi, Jayantha Ananda. 2018. "Thermal expansion properties of fused borosilicate syntactic foams." Nano Hybrids and Composites. 23, pp. 39-45. https://doi.org/10.4028/www.scientific.net/NHC.23.39

Arrays of planar vacancies in superior thermoelectric Ge1−x−yCdxBiyTe with band convergence

Hong, Min, Wang, Yuan, Liu, Weidi, Matsumura, Syo, Wang, Hao, Zou, Jin and Chen, Zhi-Gang. 2018. "Arrays of planar vacancies in superior thermoelectric Ge1−x−yCdxBiyTe with band convergence." Advanced Energy Materials. 8 (30), pp. 1-10. https://doi.org/10.1002/aenm.201801837

Realizing zT of 2.3 in Ge1−x−ySbxInyTe via Reducing the Phase-Transition Temperature and Introducing Resonant Energy Doping

Hong, Min, Chen, Zhi-Gang, Yang, Lei, Zou, Yi-Chao, Dargusch, Matthew, Wang, Hao and Zou, Jin. 2018. "Realizing zT of 2.3 in Ge1−x−ySbxInyTe via Reducing the Phase-Transition Temperature and Introducing Resonant Energy Doping." Advanced Materials. 30 (11), pp. 1-8. https://doi.org/10.1002/adma.201705942

Comparative Study on the drying shrinkage and mechanical properties of geopolymer foam concrete incorporating different dosages of fiber, sand and foam agents

Abdollahnejad, Zahra, Zhang, Zuhua, Wang, Hao and Mastali, Mohammad. 2018. "Comparative Study on the drying shrinkage and mechanical properties of geopolymer foam concrete incorporating different dosages of fiber, sand and foam agents." Hordijk, D. A. and Lukovic, M. (ed.) 2017 fib Symposium: High Tech Concrete: Where Technology and Engineering Meet. Maastricht, The Netherlands 12 - 14 Jun 2017 Cham, Switzerland.

A facile way to prepare phosphorus-Nitrogen-Functionalized graphene oxide for enhancing the flame retardancy of epoxy resin

Fang, Fang, Song, Pingan, Ran, Shiya, Guo, Zhenghong, Wang, Hao and Fang, Zhenping. 2018. "A facile way to prepare phosphorus-Nitrogen-Functionalized graphene oxide for enhancing the flame retardancy of epoxy resin." Composites Communications. 10, pp. 97-102. https://doi.org/10.1016/j.coco.2018.08.001

Efflorescence and subflorescence induced microstructural and mechanical evolution in fly ash-based geopolymers

Zhang, Zuhua, Provis, John L., Reid, Andrew and Wang, Hao. 2018. "Efflorescence and subflorescence induced microstructural and mechanical evolution in fly ash-based geopolymers." Cement and Concrete Composites. 92, pp. 165-177. https://doi.org/10.1016/j.cemconcomp.2018.06.010

Flammability characteristics of chemical treated woven hemp fabric reinforced vinyl ester composites

Misnon, M. I., Islam, M. M., Epaarachchi, J. A., Chen, H., Goda, K. and Khan, M. T. I.. 2018. "Flammability characteristics of chemical treated woven hemp fabric reinforced vinyl ester composites." Science and Technology of Materials. 30 (3), pp. 174-188. https://doi.org/10.1016/j.stmat.2018.06.001

Effect of welan gum on the hydration and hardening of Portland cement

Zhang, Yu, Zhang, Zuhua, Li, Xuerun, Li, Weifeng, Shen, Xiaodong and Wang, Hao. 2018. "Effect of welan gum on the hydration and hardening of Portland cement." Journal of Thermal Analysis and Calorimetry: an international forum for thermal studies. 131 (2), pp. 1277-1286. https://doi.org/10.1007/s10973-017-6589-5

Investigation of ultraviolet radiation effects on thermomechanical properties and shape memory behaviour of styrene-based shape memory polymers and its composite

Al Azzawi, Wessam, Epaarachchi, J. A. and Leng, Jinsong. 2018. "Investigation of ultraviolet radiation effects on thermomechanical properties and shape memory behaviour of styrene-based shape memory polymers and its composite." Composites Science and Technology. 165, pp. 266-273. https://doi.org/10.1016/j.compscitech.2018.07.001

Investigation of FBG sensor performance in detection of delamination damage in a half-conical shape composite component

Kakei, Ayad, Manuela, Jerry, Srinivasan, Vishwas, Sharda, Arvind, Islam, Mainul and Epaarachchi, Jayantha. 2019. "Investigation of FBG sensor performance in detection of delamination damage in a half-conical shape composite component ." 12th International Workshop on Structural Health Monitoring (IWSHM). United States 10 - 12 Sep 2019 United States. https://doi.org/10.12783/shm2019/32451

Simulation of Tensile Stress Concentration Evaluation using Finite Element Performance

Salleh, Zulzamri, Islam, Md Mainul and Epaarachchi, Jayantha. 2019. "Simulation of Tensile Stress Concentration Evaluation using Finite Element Performance." International Journal of Innovative Technology and Exploring Engineering. 8 (12), pp. 5647-5652. https://doi.org/10.35940/ijitee.L3989.1081219

Structural performance and photothermal recovery of carbon ﬁbre reinforced shape memory polymer

Herath, H. M .C. M., Epaarachchi, J. A., Islam, M. M., Al-Azzawi, W., Leng, J. and Zhang, F.. 2018. "Structural performance and photothermal recovery of carbon ﬁbre reinforced shape memory polymer." Composites Science and Technology. 167, pp. 206-214. https://doi.org/10.1016/j.compscitech.2018.07.042

Thermo-mechanical behaviour and shape memory characteristics of carbon fibre reinforced epoxy

Herath, Madhubhashitha, Al-Azzawi, Wessam, Epaarachchi, Jayantha, Islam, Mainul, Robertson, Scott, Leng, Jinsong and Zhang, F.. 2018. "Thermo-mechanical behaviour and shape memory characteristics of carbon fibre reinforced epoxy." 2018 International Conference on Nanoscience and Nanotechnology (ICONN 2018). Wollongong, Australia 29 Jan - 02 Feb 2018

Fracture behaviour of bamboo fiber reinforced epoxy composites

Khan, Ziaullah, Yousif, B. F. and Islam, Mainul. 2017. "Fracture behaviour of bamboo fiber reinforced epoxy composites." Composites Part B: Engineering. 116, pp. 186-199. https://doi.org/10.1016/j.compositesb.2017.02.015

Flammability characteristics of chemical treated woven hemp fabric

Misnon, Mohd Iqbal, Islam, Md Mainul, Epaarachchi, Jayantha Ananda, Chen, Haizhen, Goda, Koichi and Khan, Md Tawhidul Islam. 2018. "Flammability characteristics of chemical treated woven hemp fabric." Advances in Materials Science and Engineering. 5 (1), pp. 1-20. https://doi.org/10.5121/msej.2018.5101

Effects of water absorption on mechanical properties of glass microballoons/vinyl ester syntactic foams

Salleh, Zulzamri, Islam, Md Mainul, Epaarachchi, Jayantha Ananda and Khan, Md Tawhidul Islam. 2018. "Effects of water absorption on mechanical properties of glass microballoons/vinyl ester syntactic foams." Research and Reviews in Materials Science and Chemistry. 8 (1), pp. 59-119.

Evaluation of delamination crack tip in woven fibre glass reinforced polymer composite using FBG sensor spectra and thermo-elastic response

Kakei, Ayad, Epaarachchi, J. A., Islam, Mainul and Leng, J.. 2018. "Evaluation of delamination crack tip in woven fibre glass reinforced polymer composite using FBG sensor spectra and thermo-elastic response." Measurement. 122, pp. 178-185. https://doi.org/10.1016/j.measurement.2018.03.023

Multiscale modeling for high-performance concrete: a review

Wu, Linmei, Liu, Peng, Zhang, Zuhua, Zhu, DeJu and Wang, Hao. 2018. "Multiscale modeling for high-performance concrete: a review ." International Journal for Multiscale Computational Engineering. 16 (1), pp. 1-17. https://doi.org/10.1615/IntJMultCompEng.2018022827

Use of fiber Bragg grating sensors for monitoring delamination damage propagation in glass-fiber reinforced composite structures

Kakei, Ayad and Epaarachchi, Jayantha A.. 2018. "Use of fiber Bragg grating sensors for monitoring delamination damage propagation in glass-fiber reinforced composite structures." Frontiers of Optoelectronics. 11 (1), pp. 60-68. https://doi.org/10.1007/s12200-018-0761-9

Implementation of a finite element analysis procedure for structural analysis of shape memory behaviour of fibre reinforced shape memory polymer composites

Al Azzawi, Wessam, Epaarachchi, J. A., Islam, Mainul and Leng, Jinsong. 2017. "Implementation of a finite element analysis procedure for structural analysis of shape memory behaviour of fibre reinforced shape memory polymer composites." Smart Materials and Structures. 26 (12), pp. 1-13. https://doi.org/10.1088/1361-665X/aa928e

A review of extending performance of epoxy resins using carbon nanomaterials

Liu, Shan, Chevali, Venkata S., Xu, Zhiguang, Hui, David and Wang, Hao. 2018. "A review of extending performance of epoxy resins using carbon nanomaterials." Composites Part B: Engineering. 136 (1), pp. 197-214. https://doi.org/10.1016/j.compositesb.2017.08.020

Granular nanostructure: a facile biomimetic strategy for the design of supertough polymeric materials with high ductility and strength

Song, Pingan, Xu, Zhiguang, Dargusch, Matthew, Chen, Zhi-Gang, Wang, Hao and Guo, Qipeng. 2017. "Granular nanostructure: a facile biomimetic strategy for the design of supertough polymeric materials with high ductility and strength." Advanced Materials. 29 (46), pp. 1-7. https://doi.org/10.1002/adma.201704661

Flame retardant and mechanically tough poly(lactic acid) biocomposites via combining ammonia polyphosphate and polyethylene glycol

Sun, Yiqi, Sun, Shuai, Chen, Lei, Liu, Lina, Song, Pingan, Li, Wei, Yu, Youming, Lu, Fengzhu, Qian, Jun and Wang, Hao. 2017. "Flame retardant and mechanically tough poly(lactic acid) biocomposites via combining ammonia polyphosphate and polyethylene glycol." Composites Communications. 6. https://doi.org/10.1016/j.coco.2017.07.005

Quantitative and qualitative analyses of mechanical behavior and dimensional stability of styrene-based shape memory composites

Al Azzawi, Wessam, Islam, Mainul M., Leng, Jinsong, Li, Fengfeng and Epaarachchi, Jayantha A.. 2017. "Quantitative and qualitative analyses of mechanical behavior and dimensional stability of styrene-based shape memory composites." Journal of Intelligent Material Systems and Structures. 28 (20), pp. 3115-3126. https://doi.org/10.1177/1045389X17705210

Super-tough artiﬁcial nacre based on graphene oxide via synergistic interface interactions of Pi-Pi stacking and hydrogen bonding

Song, Pingan, Xu, Zhiguang, Wu, Yuanpeng, Cheng, Qunfeng, Guo, Qipeng and Wang, Hao. 2017. "Super-tough artiﬁcial nacre based on graphene oxide via synergistic interface interactions of Pi-Pi stacking and hydrogen bonding." Carbon. 111, pp. 807-812. https://doi.org/10.1016/j.carbon.2016.10.067

2D-alumina platelets enhance mechanical and abrasion properties of PA-612 via interfacial hydrogen-bond interactions

Qian, Mengbo, Sun, Yiqi, Xu, Xiaodong, Liu, Lina, Song, Pingan, Yu, Youming, Wang, Hao and Qian, Jun. 2017. "2D-alumina platelets enhance mechanical and abrasion properties of PA-612 via interfacial hydrogen-bond interactions." Chemical Engineering Journal. 308, pp. 760-771. https://doi.org/10.1016/j.cej.2016.09.124

Thermally stable, conductive and flame-retardant nylon 612 composites created by adding two-dimensional alumina platelets

Song, Pingan, Wang, Cong, Chen, Lei, Zheng, Yiqi, Liu, Lina, Wu, Qiang, Huang, Guobo, Yu, Youming and Wang, Hao. 2017. "Thermally stable, conductive and flame-retardant nylon 612 composites created by adding two-dimensional alumina platelets." Composites Part A: Applied Science and Manufacturing. 97, pp. 100-110. https://doi.org/10.1016/j.compositesa.2017.02.029

Preliminary study on the development of syntactic foams for marine applications

Salleh, Z., Islam, M. M. and Ku, H.. 2013. "Preliminary study on the development of syntactic foams for marine applications." Epaarachchi, Jayantha A., Lau, Alan Kin-tak and Leng, Jinsong (ed.) 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013). Gold Coast, Australia 10 - 12 Jul 2013 United States. https://doi.org/10.1117/12.2028279

Glycidyl methacrylate-compatibilized poly(lactic acid)/hemp hurd biocomposites: processing, crystallization, and thermo-mechanical response

Khan, Belas Ahmed, Na, Haining, Chevali, Venkata, Warner, Philip, Zhu, Jin and Wang, Hao. 2018. "Glycidyl methacrylate-compatibilized poly(lactic acid)/hemp hurd biocomposites: processing, crystallization, and thermo-mechanical response." Journal of Materials Science and Technology. 34 (2), pp. 387-397. https://doi.org/10.1016/j.jmst.2017.03.004

Water exposure, tensile and fatigue properties of treated hemp reinforced vinyl ester composites

Misnon, Mohd Iqbal, Islam, Mainul, Epaarachchi, Jayantha, Affandi, Nor Dalila Nor and Wang, Hao. 2018. "Water exposure, tensile and fatigue properties of treated hemp reinforced vinyl ester composites ." National Symposium on Polymeric Materials 2017 (NSPM 2017). Selangor, Malaysia 21 - 22 Oct 2017 United States . AIP Publishing. https://doi.org/10.1063/1.5047164

Toward an indexing approach to evaluate fly ashes for geopolymer manufacture

Zhang, Zuhua, Provis, John L., Zou, Jin, Reid, Andrew and Wang, Hao. 2016. "Toward an indexing approach to evaluate fly ashes for geopolymer manufacture." Cement and Concrete Research. 85, pp. 163-173. https://doi.org/10.1016/j.cemconres.2016.04.007

Preparation of natural rubber/silica nanocomposites using one- and two-dimensional dispersants by latex blending process

Luo, Yongyue, Qian, Jiangzuo, He, Dongning, Tao, Jinlong, Zhao, Pengfei, Gong, Wei, Zhang, Zuhua, Peng, Zheng, Chen, Xianfei, Wang, Hao and Dan, Yi. 2018. "Preparation of natural rubber/silica nanocomposites using one- and two-dimensional dispersants by latex blending process." Polymer Composites. 39 (5), pp. 1413-1419. https://doi.org/10.1002/pc.24081

Superior flame retardancy of epoxy resin by the combined addition of graphene nanosheets and DOPO

Liu, Shan, Fang, Zhengping, Yan, Hongqiang and Wang, Hao. 2016. "Superior flame retardancy of epoxy resin by the combined addition of graphene nanosheets and DOPO." RSC Advances: an international journal to further the chemical sciences. 6 (7), pp. 5288-5295. https://doi.org/10.1039/c5ra25988f

Advanced composites with natural reinforcement

Low, Jim, Davies, Ian J., Dong, Yu, Ahmed, Shaikh Faiz Uddin, Wang, Hao and Akil, Hazizan Md. 2014. "Advanced composites with natural reinforcement ." Advances in Materials Science and Engineering. 2014, pp. 1-2. https://doi.org/10.1155/2014/376351

Activated carbon derived from bio-waste hemp hurd and retted hemp hurd for CO2 adsorption

Liu, Shan, Ge, Lei, Gao, Shuai, Zhuang, Linzhou, Zhu, Zhonghua and Wang, Hao. 2017. "Activated carbon derived from bio-waste hemp hurd and retted hemp hurd for CO2 adsorption." Composites Communications. 5, pp. 27-30. https://doi.org/10.1016/j.coco.2017.06.002

Use of an elasto-plastic model and strain measurements of embedded fibre Bragg grating sensors to detect Mode I delamination crack propagation in woven cloth (0/90) composite materials

Kakei, Ayad Arab, Islam, Mainul, Leng, Jingsong and Epaarachchi, Jayantha A.. 2018. "Use of an elasto-plastic model and strain measurements of embedded fibre Bragg grating sensors to detect Mode I delamination crack propagation in woven cloth (0/90) composite materials." Structural Health Monitoring: an international journal. 17 (2), pp. 363-378. https://doi.org/10.1177/1475921717694812

Determination of coefficient thermal expansion of glass microballoon/vinyl ester syntactic foams

Salleh, Zulzamri, Islam, Md Mainul and Epaarachchi, Jayantha Ananda. 2016. "Determination of coefficient thermal expansion of glass microballoon/vinyl ester syntactic foams." 3rd Advanced Materials Conference (AMC 2016): Advanced Materials for Sustainability and Growth. Langkawi, Malaysia 28 - 29 Nov 2016 Malaysia. AIP Publishing. https://doi.org/10.1063/1.5010477

Thermogravimetry analysis on fused borosilicate syntactic foams

Salleh, Zulzamri, Islam, Md Mainul and Epaarachchi, Jayantha Ananda. 2017. "Thermogravimetry analysis on fused borosilicate syntactic foams." 3rd Advanced Materials Conference (AMC 2016): Advanced Materials for Sustainability and Growth. Langkawi, Malaysia 28 - 29 Nov 2016 Kulim, Kedah, Malaysia. AIP Publishing. https://doi.org/10.1063/1.5010542

Analysis of stress concentration factor for tensile characteristics of syntactic foam using finite element method

Salleh, Zulzamri, Islam, Md Mainul and Epaarachchi, Jayantha Ananda. 2017. "Analysis of stress concentration factor for tensile characteristics of syntactic foam using finite element method." Journal of Research Updates in Polymer Science. 6 (1), pp. 21-32. https://doi.org/10.6000/1929-5995.2017.06.01.4

Autogenous shrinkage of high performance concrete: a review

Wu, Linmei, Farzadnia, Nima, Shi, Caijun, Zhang, Zuhua and Wang, Hao. 2017. "Autogenous shrinkage of high performance concrete: a review." Construction and Building Materials. 149, pp. 62-75. https://doi.org/10.1016/j.conbuildmat.2017.05.064

Vinyl ester/glass microballoon syntactic foams with low density

Salleh, Zulzamri, Islam, Md Mainul, Epaarachchi, Jayantha Ananda and Su, Haibin. 2017. "Vinyl ester/glass microballoon syntactic foams with low density." International Research Journal of Materials Sciences and Applications. 2017 (1), pp. 1-25.

Investigation of the impact properties of glass fibre / HMPP fibre hybrid composite materials for civil infrastructure constructions

Malvern, J. L., Epaarachchi, J. A. and Lau, K. T.. 2011. "Investigation of the impact properties of glass fibre / HMPP fibre hybrid composite materials for civil infrastructure constructions." 18th International Conference on Composite Materials (ICCM-18). Jeju, Korea 21 - 26 Aug 2011 Korea.

Effect of degumming on tussah silk fibre

Ho, M. P., Lau, K. T. and Wang, H.. 2011. "Effect of degumming on tussah silk fibre." Lee, Woo (ed.) 18th International Conference on Composite Materials (ICCM-18). Jeju, Korea 21 - 26 Aug 2011 Seoul, Korea.

Development of hemp fabric reinforced composites

Misnon, Mohd Iqbal. 2016. Development of hemp fabric reinforced composites. PhD Thesis Doctor of Philosophy. University of Southern Queensland.

Identification of distortions to FBG spectrum using FBG fixed filters

Kahandawa, G. C., Epaarachchi, J. A. and Wang, H.. 2011. "Identification of distortions to FBG spectrum using FBG fixed filters." Lee, Woo (ed.) 18th International Conference on Composite Materials (ICCM-18). Jeju, Korea 21 - 26 Aug 2011 Korea.

Mechanical properties of activated carbon (AC) coconut shell reinforced polypropylene composites encapsulated with epoxy resin

Salleh, Z., Islam, M. M., Yusop, M. Y. M. and Idrus, M. A. Munaim M.. 2014. "Mechanical properties of activated carbon (AC) coconut shell reinforced polypropylene composites encapsulated with epoxy resin." Xuan, Li (ed.) 5th International Conference on Chemical, Biological and Environmental Engineering (ICBEE 2013). New Delhi, India 14 - 15 Sep 2013 United States. https://doi.org/10.1016/j.apcbee.2014.01.017

Synthesis and characterization of novel soybean-oil-based elastomers with favorable processability and tunable properties

Wang, Zhao, Zhang, Xing, Wang, Runguo, Kang, Hailan, Qiao, Bo, Ma, Jun, Zhang, Liqun and Wang, Hao. 2012. "Synthesis and characterization of novel soybean-oil-based elastomers with favorable processability and tunable properties." Macromolecules. 45 (22), pp. 9010-9019. https://doi.org/10.1021/ma301938a

Tensile behaviours of activated carbon (AC) coconut shell reinforced recycle polyethylene (PET) hybrid composites

Salleh, Zulzamri, Islam, Md Mainul, Yusop, M. Y. M. and Muhamad, M. S.. 2013. "Tensile behaviours of activated carbon (AC) coconut shell reinforced recycle polyethylene (PET) hybrid composites." 12th International Conference on Frontiers of Polymers and Advanced Materials (ICFPAM 2013). Auckland, New Zealand 08 - 13 Dec 2013

Cure shrinkage in epoxy grouts for grouted repairs

Shamsuddoha, Md, Islam, Md Mainul, Aravinthan, Thiru, Manalo, Allan and Lau, Kin-tak. 2013. "Cure shrinkage in epoxy grouts for grouted repairs." Epaarachchi, Jayantha A., Lau, Alan Kin-tak and Leng, Jinsong (ed.) 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013). Gold Coast, Australia 10 - 12 Jul 2013 United States. https://doi.org/10.1117/12.2028085

Selection of hemp fabric as reinforcement in composite materials

Misnon, Mohd Iqbal, Islam, Md Mainul, Epaarachchi, Jayantha Ananda and Lau, Kin-tak. 2014. "Selection of hemp fabric as reinforcement in composite materials." Mashud, Mohammad (ed.) 3rd International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE 2014). Khulna, Bangladesh 26 - 27 Dec 2014 Khulna, Bangladesh.

Compressive properties of ceramic microballoon syntactic foams

Salleh, Zulzamri, Islam, Md Mainul and Epaarachchi, Jayantha Ananda. 2014. "Compressive properties of ceramic microballoon syntactic foams." Mashud, Mohammad (ed.) 3rd International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE 2014). Khulna, Bangladesh 26 - 27 Dec 2014 Khulna, Bangladesh.

Compressive, tensile and thermal properties of epoxy grouts subjected to underwater conditioning at elevated temperature

Shamsuddoha, M., Islam, M. M., Aravinthan, T., Manalo, A. and Djukic, L. P.. 2014. "Compressive, tensile and thermal properties of epoxy grouts subjected to underwater conditioning at elevated temperature." Smith, Scott T. (ed.) 23rd Australasian Conference on the Mechanics of Structures and Materials (ACMSM23). Byron Bay, Australia 09 - 12 Dec 2014 Lismore, Australia.

Development of fracture and damage modeling concepts for composite materials

Kakei, Ayad Arab Ghaidan, Epaarachchi, Jayantha Ananda, Islam, M. Mainul and Leng, Jinsong. 2016. "Development of fracture and damage modeling concepts for composite materials." Epaarachchi, Jayantha Ananda and Kahandawa, Gayan Chanaka (ed.) Structural health monitoring technologies and next-generation smart composite structures. Roca Raton, USA. CRC Press. pp. 341-368

Effect of a nano-fibrous structure on the nanofiber mat's hydrophobicity

Javazmi, L., Khodami, A., Mazrouei-Sebdani, Z. and Epaarachchi, J.. 2016. "Effect of a nano-fibrous structure on the nanofiber mat's hydrophobicity." 2016 International Conference on Nanoscience and Nanotechnology (ICONN 2016) . Canberra, Australia 07 - 11 Feb 2016

Inorganic polymer foams: transform from non-structural to structural upon fire

Zhang, Zuhua, Yang, Tao, Wang, Hao and Yao, Xiao. 2013. "Inorganic polymer foams: transform from non-structural to structural upon fire." Epaarachchi, Jayantha A., Lau, Alan Kin-tak and Leng, Jinsong (ed.) 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013). Gold Coast, Australia 10 - 12 Jul 2013 Bellingham, WA. United States. https://doi.org/10.1117/12.2027739

Integration of textile fabric and coconut shell in particleboard

Misnon, M. I., Bahari, S. A., Islam, M. M. and Epaarachchi, J. A.. 2013. "Integration of textile fabric and coconut shell in particleboard ." Epaarachchi, Jayantha A., Lau, Alan Kin-tak and Leng, Jinsong (ed.) 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013). Gold Coast, Australia 10 - 12 Jul 2013 United States. https://doi.org/10.1117/12.2027836

Effect of hygrothermal conditioning on the mechanical and thermal properties of epoxy grouts for offshore pipeline rehabilitation

Shamsuddoha, Md, Islam, Md Mainul, Aravinthan, Thiru, Manalo, Allan and Djukic, Luke P.. 2016. "Effect of hygrothermal conditioning on the mechanical and thermal properties of epoxy grouts for offshore pipeline rehabilitation." AIMS Material Science. 3 (3), pp. 832-850. https://doi.org/10.3934/matersci.2016.3.832

Novel self-supporting zeolitic block with tunable porosity and crystallinity for water treatment

Zhang, Zuhua, Li, Liangfeng, He, Dongning, Ma, Xue, Yan, Chunjie and Wang, Hao. 2016. "Novel self-supporting zeolitic block with tunable porosity and crystallinity for water treatment." Materials Letters. 178, pp. 151-154. https://doi.org/10.1016/j.matlet.2016.04.214

A dynamic tester to evaluate the thermal and moisture behaviour of the surface of textiles

Li, Wenbin, Xu, Weilin, Wang, Hao and Wang, Xin. 2016. "A dynamic tester to evaluate the thermal and moisture behaviour of the surface of textiles." Journal of Thermal Biology. 55, pp. 14-19. https://doi.org/10.1016/j.jtherbio.2015.11.005

Compositional, microstructural and mechanical properties of ambient condition cured alkali-activated cement

Zhang, Zuhua, Li, Liangfeng, Ma, Xue and Wang, Hao. 2016. "Compositional, microstructural and mechanical properties of ambient condition cured alkali-activated cement." Construction and Building Materials. 113, pp. 237-245. https://doi.org/10.1016/j.conbuildmat.2016.03.043

Synthesis of an intrinsically flame retardant bio-based benzoxazine resin

Yan, Hongquiang, Sun, Chuang, Fang, Zhengping, Liu, Xiaoqing, Zhu, Jin and Wang, Hao. 2016. "Synthesis of an intrinsically flame retardant bio-based benzoxazine resin." Polymer. 97, pp. 418-427. https://doi.org/10.1016/j.polymer.2016.05.053

The pore characteristics of geopolymer foam concrete and their impact on the compressive strength and modulus

Zhang, Zuhua and Wang, Hao. 2016. "The pore characteristics of geopolymer foam concrete and their impact on the compressive strength and modulus." Frontiers in Materials. 3, pp. 1-11. https://doi.org/10.3389/fmats.2016.00038

Fly ash-based geopolymer: clean production, properties and applications

Zhuang, Xiao Yu, Chen, Liang, Komarneni, Sridhar, Zhou, Chun Hui, Tong, Dong Shen, Yang, Hui Min, Yu, Wei Hua and Wang, Hao. 2016. "Fly ash-based geopolymer: clean production, properties and applications." Journal of Cleaner Production. 125, pp. 253-267. https://doi.org/10.1016/j.jclepro.2016.03.019

Conversion of local industrial wastes into greener cement through geopolymer technology: a case study of high-magnesium nickel slag

Zhang, Zuhua, Zhu, Yingcan, Yang, Tao, Li, Liangfeng, Zhu, Huajun and Wang, Hao. 2017. "Conversion of local industrial wastes into greener cement through geopolymer technology: a case study of high-magnesium nickel slag." Journal of Cleaner Production. 141, pp. 463-471. https://doi.org/10.1016/j.jclepro.2016.09.147

Microstructure and properties of Mg-Nd-Zn-Zr alloys

Wang, H., Ning, Z. L., Liang, W. Z., Cao, F. Y. and Sun, J. F.. 2010. "Microstructure and properties of Mg-Nd-Zn-Zr alloys." 2009 International Conference and Exhibition on Materials and AustCeram (MA 2009). Gold Coast, Australia 01 - 03 Jul 2009 Melbourne, Australia.

Hemp hurd based carbon template for reaction formed silicon carbide ceramic

Yan, Z. L., Ma, T., Zhang, J. C., Zhang, H. and Wang, H.. 2013. "Hemp hurd based carbon template for reaction formed silicon carbide ceramic." Hoa, Suong Van and Hubert, Pascal (ed.) 19th International Conference on Composite Materials (ICCM-19). Montreal, Canada 28 Jul - 02 Aug 2013 Canada.

Mechanical properties of sandwich composite made of syntactic foam core and GFRP skins

Salleh, Zulzamri, Islam, Md Mainul, Epaarachchi, Jayantha Ananda and Su, Haibin. 2016. "Mechanical properties of sandwich composite made of syntactic foam core and GFRP skins." AIMS Material Science. 3 (4), pp. 1704-1727. https://doi.org/10.3934/matersci.2016.4.1704

Analysis of stress concentration factor around the hole of syntactic foam tensile specimens

Salleh, Z., Islam, M. M. and Epaarachchi, J. A.. 2016. "Analysis of stress concentration factor around the hole of syntactic foam tensile specimens." International Journal of Advances in Science, Engineering and Technology (IJASEAT). 4 (3), pp. 102-106.

Woven hemp fabric reinforced vinyl ester composite: effect of water absorption on the mechanical properties degradation

Misnon, Mohd Iqbal, Islam, Md Mainul, Epaarachchi, Jayantha Ananda, Wang, Hao and Lau, Kin-tak. 2016. "Woven hemp fabric reinforced vinyl ester composite: effect of water absorption on the mechanical properties degradation." International Journal of Advances in Science, Engineering and Technology (IJASEAT). 4 (3), pp. 96-101.

Geopolymer from Kaolin in China: an overview

Zhang, Z. H., Zhu, H. J., Zhou, C. H. and Wang, H.. 2016. "Geopolymer from Kaolin in China: an overview." Applied Clay Science. 119 (1), pp. 31-41. https://doi.org/10.1016/j.clay.2015.04.023

Green Composite Materials

Wang, Hao, Schubel, Peter, Yi, Xiaosu, Zhu, Jin, Ulven, Chad and Qiu, Yiping. 2015. "Green Composite Materials." Advances in Materials Science and Engineering. 2015. https://doi.org/10.1155/2015/487416

Shape memory polymers and their applications

Al Azzawi, W. S., Epaarachchi, Jayantha Ananda, Islam, M. Mainul and Leng, Jinsong. 2016. "Shape memory polymers and their applications." Epaarachchi, Jayantha Ananda and Kahandawa, Gayan Chanaka (ed.) Structural health monitoring technologies and next-generation smart composite structures. Boca Raton, Florida. CRC Press. pp. 447-478

Important aspects of finite element modeling of low density thermo plastic closed cell foams

Thota, N. M., Epaarachchi, J. A. and Lau, K. T.. 2013. "Important aspects of finite element modeling of low density thermo plastic closed cell foams." Mishra, G. C. and Sanskriti, Krishi (ed.) 3rd World Congress on Frontiers of Mechanical, Aerospace and Automotive Engineering (WCFMAAE 2013). New Delhi, India 02 - 03 Feb 2013 New Delhi, India.

Synergistic flame retardancy effect of graphene nanosheets and traditional retardants on epoxy resin

Liu, Shan, Fang, Zhengping, Yan, Hongqiang, Chevali, Venkata S. and Wang, Hao. 2016. "Synergistic flame retardancy effect of graphene nanosheets and traditional retardants on epoxy resin." Composites Part A: Applied Science and Manufacturing. 89, pp. 26-32. https://doi.org/10.1016/j.compositesa.2016.03.012

Processing and properties of antibacterial silver nanoparticle-loaded hemp hurd/poly(lactic acid) biocomposites

Khan, Belas A., Chevali, Venkata S., Na, Haining, Zhu, Jin, Warner, Philip and Wang, Hao. 2016. "Processing and properties of antibacterial silver nanoparticle-loaded hemp hurd/poly(lactic acid) biocomposites." Composites Part B: Engineering. 100, pp. 10-18. https://doi.org/10.1016/j.compositesb.2016.06.022

Detection and characterisation of delamination damage propagation in woven glass fibre reinforced polymer composite using thermoelastic response mapping

Kakei, Ayad, Epaarachchi, J. A., Islam, Mainul, Leng, J. and Rajic, N.. 2016. "Detection and characterisation of delamination damage propagation in woven glass fibre reinforced polymer composite using thermoelastic response mapping." Composite Structures. 153, pp. 442-450. https://doi.org/10.1016/j.compstruct.2016.06.044

Improving the quality of experimental research in civil engineering by employing statistical design of experiment: a case study in developing composite hybrid sandwich panel

Fajrin, Jauhar, Zhuge, Yan, Bullen, Frank and Wang, Hao. 2015. "Improving the quality of experimental research in civil engineering by employing statistical design of experiment: a case study in developing composite hybrid sandwich panel." Zulkifli, Fitri Yuli and Suwartha, Nyoman (ed.) 14th International conference on QIR (Quality in Research). Lombok, Indonesia 10 - 13 Aug 2015 Lombok, Indonesia.

Mechanical properties of low density glass microballoon/vinyl ester syntactic foam for marine application

Salleh, Zulzamri, Islam, Md Mainul and Epaarachchi, Jayantha Ananda. 2015. "Mechanical properties of low density glass microballoon/vinyl ester syntactic foam for marine application." 12th Composites Australia and CRC-ACS Conference 2015: Game On! Winning with Composites. Gold Coast, Australia 21 - 23 Apr 2015

On the flameproof treatment of ramie fabrics using a spray-assisted layer-by-layer technique

Zhao, Li, Yan, Hongqiang, Fang, Zhengping, Wang, Jing and Wang, Hao. 2015. "On the flameproof treatment of ramie fabrics using a spray-assisted layer-by-layer technique." Polymer Degradation and Stability. 121, pp. 11-17. https://doi.org/10.1016/j.polymdegradstab.2015.08.007

Recent advances in clay mineral-containing nanocomposite hydrogels

Zhao, Li Zhi, Zhou, Chun Hui, Wang, Jing, Tong, Dong Shen, Yu, Wei Hua and Wang, Hao. 2015. "Recent advances in clay mineral-containing nanocomposite hydrogels." Soft Matter. 11 (48), pp. 9229-9246. https://doi.org/10.1039/c5sm01277e

Mechanical, thermal insulation, thermal resistance and acoustic absorption properties of geopolymer foam concrete

Zhang, Zuhua, Provis, John L., Reid, Andrew and Wang, Hao. 2015. "Mechanical, thermal insulation, thermal resistance and acoustic absorption properties of geopolymer foam concrete." Cement and Concrete Composites. 62, pp. 97-105. https://doi.org/10.1016/j.cemconcomp.2015.03.013

Compressive behaviour of low density polymeric syntactic foams

Salleh, Zulzamri, Islam, Md Mainul and Epaarachchi, Jayantha Ananda. 2015. "Compressive behaviour of low density polymeric syntactic foams." Applied Mechanics and Materials. 799-800, pp. 135-139. https://doi.org/10.4028/www.scientific.net/AMM.799-800.135

Effect of iron acetylacetonate on the crosslink structure, thermal and flammability properties of novel aromatic diamine-based benzoxazines containing cyano group

Yan, Hongqiang, Wang, Huaqing, Cheng, Jie, Fang, Zhengping and Wang, Hao. 2015. "Effect of iron acetylacetonate on the crosslink structure, thermal and flammability properties of novel aromatic diamine-based benzoxazines containing cyano group." RSC Advances: an international journal to further the chemical sciences. 5 (24), pp. 18538-18545. https://doi.org/10.1039/c4ra15035j

Analyses of woven hemp fabric characteristics for composite reinforcement

Misnon, M. I., Islam, M. M., Epaarachchi, J. A. and Lau, K. T.. 2015. "Analyses of woven hemp fabric characteristics for composite reinforcement." Materials and Design. 66 (A), pp. 82-92. https://doi.org/10.1016/j.matdes.2014.10.037

Effects of rare earth La on microstructure and properties of Ag-21Cu-25Sn alloy ribbon prepared by melt spinning

Ma, Xue, Li, Liangfeng, Zhang, Zuhua, Wang, Hao, Wang, Enze and Qiu, Tai. 2015. "Effects of rare earth La on microstructure and properties of Ag-21Cu-25Sn alloy ribbon prepared by melt spinning ." Materials and Design. 83, pp. 1-5. https://doi.org/10.1016/j.matdes.2015.05.083

Flame retarding and reinforcing modification of ramie/polybenzoxazine composites by surface treatment of ramie fabric

Li, Nannan, Yan, Hongqiang, Xia, Lei, Mao, Lebo, Fang, Zhengping, Song, Yihu and Wang, Hao. 2015. "Flame retarding and reinforcing modification of ramie/polybenzoxazine composites by surface treatment of ramie fabric." Composites Science and Technology. 121, pp. 82-88. https://doi.org/10.1016/j.compscitech.2015.07.013

Ground hemp fibers as filler/reinforcement for thermoplastic biocomposites

Etaati, Amir, Pather, Selvan, Rahman, Moloud and Wang, Hao. 2015. "Ground hemp fibers as filler/reinforcement for thermoplastic biocomposites." Advances in Materials Science and Engineering. 2015. https://doi.org/10.1155/2015/513590

Research difference of strain distribution and microstructure evolution between rolling direction and transverse direction of AM50 Mg alloy plate by digital image correlation

Li, Qiang, Hua, Fuan, Li, Jianping and Wang, Hao. 2015. "Research difference of strain distribution and microstructure evolution between rolling direction and transverse direction of AM50 Mg alloy plate by digital image correlation ." Advances in Materials Science and Engineering. 2015. https://doi.org/10.1155/2015/175873

Formation of defects in the graphite oxidization process: a positron study

Gong, Wei, He, Dongning, Tao, Jinlong, Zhao, Pengfei, Kong, Lingxue, Luo, Yongyue, Peng, Zheng and Wang, Hao. 2015. "Formation of defects in the graphite oxidization process: a positron study." RSC Advances: an international journal to further the chemical sciences. 5 (108), pp. 88908-88914. https://doi.org/10.1039/c5ra14660g

Improvement on the properties of polylactic acid (PLA) using bamboo charcoal particles

Ho, Mei-po, Lau, Kin-tak, Wang, Hao and Hui, David. 2015. "Improvement on the properties of polylactic acid (PLA) using bamboo charcoal particles." Composites Part B: Engineering. 81, pp. 14-25. https://doi.org/10.1016/j.compositesb.2015.05.048

Alkali-activated cements for protective coating of OPC concrete

Zhang, Z. and Wang, H.. 2015. "Alkali-activated cements for protective coating of OPC concrete." Pacheco-Torgal, Fernando, Labrincha, Joao, Leonelli, C., Palomo, A. and Chindaprasirt, P. (ed.) Handbook of alkali-activated cements, mortars and concretes. Cambridge, United Kingdom. Woodhead Publishing Limited. pp. 605-626

Analysing the relation between pore structure and permeability of alkali-activated concrete binders

Zhang, Z. and Wang, H.. 2015. "Analysing the relation between pore structure and permeability of alkali-activated concrete binders." Pacheco-Torgal, Fernando, Labrincha, Joao, Leonelli, C., Palomo, A. and Chindaprasirt, P. (ed.) Handbook of alkali-activated cements, mortars and concretes. Cambridge, United Kingdom. Woodhead Publishing Limited. pp. 235-264

Flame-retardant coating by alternate assembly of poly(vinylphosphonic acid) and polyethylenimine for ramie fabrics

Wang, Li-li, Zhang, Tao, Yan, Hong-quiang, Peng, Mao, Fang, Zheng-ping, Li, Yan and Wang, Hao. 2014. "Flame-retardant coating by alternate assembly of poly(vinylphosphonic acid) and polyethylenimine for ramie fabrics." Chinese Journal of Polymer Science. 32 (3), pp. 305-314. https://doi.org/10.1007/s10118-014-1408-y

Antibacterial properties of hemp and other natural fibre plants: a review

Khan, Belas Ahmed, Warner, Philip and Wang, Hao. 2014. "Antibacterial properties of hemp and other natural fibre plants: a review." BioResources. 9 (2), pp. 3642-3659.

Antibacterial properties of hemp hurd powder against E. coli

Khan, Belas Ahmed, Wang, Jing, Warner, Philip and Wang, Hao. 2015. "Antibacterial properties of hemp hurd powder against E. coli." Journal of Applied Polymer Science. 132 (10), pp. 41588/1-41588/6. https://doi.org/10.1002/app.41588

A fundamental approach to design and develop fly ash based geopolymers

Wang, Hao and Zhang, Zuhua. 2014. "A fundamental approach to design and develop fly ash based geopolymers." Shi, Caijun and Shen, Xiaodong (ed.) 2nd International Conference on Advances in Chemically Activated Materials (CAM 2014). Changsha, China 01 - 03 Jun 2014 Bagneux, France.

The importance of fly ash property in the manufacture of geopolymers

Zhang, Zuhua, Zhu, Yingcan, Reid, Andrew and Wang, Hao. 2014. "The importance of fly ash property in the manufacture of geopolymers." Shi, Caijun and Shen, Xiaodong (ed.) 2nd International Conference on Advances in Chemically Activated Materials (CAM 2014). Changsha, China 01 - 03 Jun 2014 Bagneux, France.

Hemp reinforced composites with alkalization and acetylation fibre treatments

Wang, H., Kabir, M. M. and Lau, K. T.. 2014. "Hemp reinforced composites with alkalization and acetylation fibre treatments." Polymers and Polymer Composites. 22 (3), pp. 247-252. https://doi.org/10.1177/096739111402200

Effect of surface modifications on the thermal and moisture behavior of wool fabric

Wang, Xin, Zhao, Yuan, Li, Wenbin and Wang, Hao. 2015. "Effect of surface modifications on the thermal and moisture behavior of wool fabric." Applied Surface Science. 342, pp. 101-105. https://doi.org/10.1016/j.apsusc.2015.03.027

Injection molded noil hemp fiber composites: interfacial shear strength, fiber strength, and aspect ratio

Etaati, Amir, Pather, Selvan, Cardona, Francisco and Wang, Hao. 2016. "Injection molded noil hemp fiber composites: interfacial shear strength, fiber strength, and aspect ratio." Polymer Composites. 37 (1), pp. 213-220. https://doi.org/10.1002/pc.23172

Characterisation of the mechanical properties of pultruded fibre-reinforced polymer tube

Guades, Ernesto, Aravinthan, Thiru and Islam, Md Mainul. 2014. "Characterisation of the mechanical properties of pultruded fibre-reinforced polymer tube." Materials and Design. 63, pp. 305-315. https://doi.org/10.1016/j.matdes.2014.06.018

Evaluation of the blunt thoracic trauma caused by solid sports ball impacts

Thota, Narasimha, Epaarachchi, Jayantha and Lau, Kin Tak. 2015. "Evaluation of the blunt thoracic trauma caused by solid sports ball impacts." Journal of Biomechanical Science and Engineering. 10 (2). https://doi.org/10.1299/jbse.14-00264

Study on the surface temperature of fabric in the process of dynamic moisture liberation

Wang, Xin, Li, Wenbin, Xu, Weilin and Wang, Hao. 2014. "Study on the surface temperature of fabric in the process of dynamic moisture liberation." Fibers and Polymers. 15 (11), pp. 2437-2440. https://doi.org/10.1007/s12221-014-2437-4

Viscous criterion and its relation with the projectile-thorax energy interactions

Thota, Narasimha, Epaarachchi, Jayantha and Lau, Kin Tak. 2014. "Viscous criterion and its relation with the projectile-thorax energy interactions." 8th Australasian Congress on Applied Mechanics (ACAM 8). Melbourne, Australia 24 - 28 Nov 2014

Evaluation of the blunt thoracic trauma due to baseball impacts – review of the Blunt Criterion

Thota, Narasimha M., Epaarachchi, Jayantha A. and Lau, Kin Tak. 2014. "Evaluation of the blunt thoracic trauma due to baseball impacts – review of the Blunt Criterion." 8th Australasian Congress on Applied Mechanics (ACAM 8). Melbourne, Australia 24 - 28 Nov 2014

Effect of energy absorbing mechanisms on the blunt thoracic trauma caused by ballistic impacts

Thota, Narasimha M., Epaarachchi, Jayantha A. and Lau, Kin Tak. 2014. "Effect of energy absorbing mechanisms on the blunt thoracic trauma caused by ballistic impacts." 8th Australasian Congress on Applied Mechanics (ACAM 8). Melbourne, Australia 24 - 28 Nov 2014

Review of anthropomorphic test dummies for the evaluation of thoracic trauma due to blunt ballistic impacts

Thota, Narasimha M., Epaarachchi, Jayantha A. and Lau, Kin Tak. 2014. "Review of anthropomorphic test dummies for the evaluation of thoracic trauma due to blunt ballistic impacts." 8th Australasian Congress on Applied Mechanics (ACAM 8). Melbourne, Australia 24 - 28 Nov 2014

Effects of indium addition on properties and wettability of Sn–0.7Cu–0.2Ni lead-free solders

Li, L. F., Cheng, Y. K., Xu, G. L., Wang, E. Z., Zhang, Z. H. and Wang, H.. 2014. "Effects of indium addition on properties and wettability of Sn–0.7Cu–0.2Ni lead-free solders." Materials and Design. 64, pp. 15-20. https://doi.org/10.1016/j.matdes.2014.07.035

Impact location determination on thin laminated composite plates using an NIR-FBG sensor system

Hafizi, Z. M., Epaarachchi, J. and Lau, K. T.. 2015. "Impact location determination on thin laminated composite plates using an NIR-FBG sensor system." Measurement. 61, pp. 51-57. https://doi.org/10.1016/j.measurement.2014.08.040

Effects of acid treatments on bamboo cellulose nanocrystals

Zhang, Pengpeng, Tong, Dongshen, Lin, Chunxiang, Yang, Huimin, Zhong, Zheke, Yu, Wei Hua, Wang, Hao and Zhou, Chunhui. 2014. "Effects of acid treatments on bamboo cellulose nanocrystals." Asia Pacific Journal of Chemical Engineering. 9 (5), pp. 686-695. https://doi.org/10.1002/apj.1812

Clean production of CTAB-montmorillonite: formation mechanism and swelling behavior in xylene

Yu, Wei Hua, Ren, Qian Qian, Tong, Dong Shen, Zhou, Chun Hui and Wang, Hao. 2014. "Clean production of CTAB-montmorillonite: formation mechanism and swelling behavior in xylene ." Applied Clay Science. 97-98, pp. 222-234. https://doi.org/10.1016/j.clay.2014.06.007

Signal monitoring system for monitoring strain applied to a composite component

Kahandawa Appuhamillage, Gayan Chanaka, Epaarachchi, Jayantha and Wang, Hao. 2015. Signal monitoring system for monitoring strain applied to a composite component. US Patent No. 9063032 B2/23rd June 2015

Bio-corrosion of a magnesium alloy with different processing histories

Wang, H., Estrin, Y. and Zuberova, Z.. 2008. "Bio-corrosion of a magnesium alloy with different processing histories." Materials Letters. 62 (16), pp. 2476-2479. https://doi.org/10.1016/j.matlet.2007.12.052

CAE simulation based methodology for airbag compliant vehicle front protection system development

Thota, Narasimha, Epaarachchi, Jayantha and Lau, Kin Tak. 2013. "CAE simulation based methodology for airbag compliant vehicle front protection system development." International Journal of Vehicle Structures and Systems. 5 (3-4), pp. 95-104. https://doi.org/10.4273/ijvss.5.3-4.04

Potentiality of utilising natural textile materials for engineering composites applications

Misnon, Mohd Iqbal, Islam, Md Mainul, Epaarachchi, Jayantha Ananda and Lau, Kin-tak. 2014. "Potentiality of utilising natural textile materials for engineering composites applications." Materials and Design. 59, pp. 359-368. https://doi.org/10.1016/j.matdes.2014.03.022

Development and validation of a thorax surrogate FE model for assessment of trauma due to high speed blunt impacts

Thota, Narasimha, Epaarachchi, Jayantha and Lau, Kin-Tak. 2014. "Development and validation of a thorax surrogate FE model for assessment of trauma due to high speed blunt impacts." Journal of Biomechanical Science and Engineering. 9 (1), pp. 08-1. https://doi.org/10.1299/jbse.2014jbse0008

Controlled nucleation method: a new process for semisolid metal forming

Wang, Hao. 2005. "Controlled nucleation method: a new process for semisolid metal forming." Special Casting and Non-ferrous Alloys (Tezhong Zhuzao Ji Youse Hejin) .

Fly ash-based geopolymers: the relationship between composition, pore structure and efflorescence

Zhang, Zuhua, Provis, John L., Reid, Andrew and Wang, Hao. 2014. "Fly ash-based geopolymers: the relationship between composition, pore structure and efflorescence." Cement and Concrete Research. 64, pp. 30-41. https://doi.org/10.1016/j.cemconres.2014.06.004

Thermochemistry study of the effect of alkali content on the early geopolymerisation at room temperature

Zhang, Z., Yao, X. and Wang, H.. 2010. "Thermochemistry study of the effect of alkali content on the early geopolymerisation at room temperature." Shi, Caijun and Shen, Xiadong (ed.) 1st International Conference on Advances in Chemically-Activated Materials (CAM 2010). Jinan, China 09 - 12 May 2010 Bagneux, France.

Using fly ash to partially substitute metakaolin in geopolymer synthesis

Zhang, Zuhua, Wang, Hao, Zhu, Yingcan, Reid, Andrew, Provis, John L. and Bullen, Frank. 2014. "Using fly ash to partially substitute metakaolin in geopolymer synthesis." Applied Clay Science. 88-89, pp. 194-201. https://doi.org/10.1016/j.clay.2013.12.025

Geopolymer foam concrete: an emerging material for sustainable construction

Zhang, Zuhua, Provis, John L., Reid, Andrew and Wang, Hao. 2014. "Geopolymer foam concrete: an emerging material for sustainable construction." Construction and Building Materials. 56, pp. 113-127. https://doi.org/10.1016/j.conbuildmat.2014.01.081

Chemical treatments on hemp fibre composites

Wang, Hao, Kabir, Mazed and Lau, K. T.. 2013. "Chemical treatments on hemp fibre composites." Wang, Xungai (ed.) Fiber Society Spring 2013 Technical Conference (FS 2013): Advancing Scientific Knowledge Pertaining to Fibers and Fibrous Materials. Geelong, Australia 22 - 24 May 2013 Raleigh, NC. United States.

Fourier transform infrared spectroscopy analysis for hydrothermal transformation of microcrystalline cellulose on montmorillonite

Wu, Lin Mei, Tong, Dong Shen, Zhao, Li Zhi, Yu, Wei Hua, Zhou, Chun Hui and Wang, Hao. 2014. "Fourier transform infrared spectroscopy analysis for hydrothermal transformation of microcrystalline cellulose on montmorillonite." Applied Clay Science. 95, pp. 74-82. https://doi.org/10.1016/j.clay.2014.03.014

Novel hydrothermal carbonization of cellulose catalyzed by montmorillonite to produce kerogen-like hydrochar

Wu, Lin Mei, Zhou, Chun Hui, Tong, Dong Shen, Yu, Wei Hua and Wang, Hao. 2014. "Novel hydrothermal carbonization of cellulose catalyzed by montmorillonite to produce kerogen-like hydrochar ." Cellulose. 21 (4), pp. 2845-2857. https://doi.org/10.1007/s10570-014-0323-2

An investigation of acoustic emission signal attenuation for monitoring of progressive failure in fiberglass reinforced composite laminates

Hafizi, Z. M., Epaarachchi, J. and Lau, K. T.. 2013. "An investigation of acoustic emission signal attenuation for monitoring of progressive failure in fiberglass reinforced composite laminates ." International Journal of Automotive and Mechanical Engineering. 8 (1), pp. 1442-1456. https://doi.org/10.15282/ijame.8.2013.31.0119

Hemp and hemp-based composites

Wang, Hao and Lau, Alan K.T.. 2013. "Hemp and hemp-based composites." Thakur, Vijay Kumar (ed.) Green composites from natural resources. Boca Raton, FL. United States. CRC Press. pp. 63-94

Effect of in-situ TiC particles on hot deformation behavior of spray formed 7075 Al alloy

Liu, Hui-min, Li, Zhi-peng and Wang, Hao. 2013. "Effect of in-situ TiC particles on hot deformation behavior of spray formed 7075 Al alloy." Transactions of Materials and Heat Treatment (Cailiao Rechuli Xuebao). 34 (S2), pp. 173-178.

Effect of graphene nanosheets and layered double hydroxides on the flame retardancy and thermal degradation of epoxy resin

Liu, Shan, Yan, Hongqiang, Fang, Zhengping, Guo, Zhenghong and Wang, Hao. 2014. "Effect of graphene nanosheets and layered double hydroxides on the flame retardancy and thermal degradation of epoxy resin." RSC Advances: an international journal to further the chemical sciences. 4 (36), pp. 18652-18659. https://doi.org/10.1039/c4ra01267d

Efflorescence: a critical challenge for geopolymer applications?

Zhang, Zuhua, Wang, Hao, Provis, John L. and Reid, Andrew. 2013. "Efflorescence: a critical challenge for geopolymer applications?" Dao, Vinh and Dux, Peter (ed.) Concrete Institute of Australia's Biennial National Conference (Concrete 2013): Understanding Concrete. Gold Coast, Australia 16 - 18 Oct 2013 Sydney, Australia.

The study of fibre/matrix bond strength in short hemp polypropylene composites from dynamic mechanical analysis

Etaati, Amir, Pather, Selvan, Fang, Zhengping and Wang, Hao. 2014. "The study of fibre/matrix bond strength in short hemp polypropylene composites from dynamic mechanical analysis." Composites Part B: Engineering. 62, pp. 19-28. https://doi.org/10.1016/j.compositesb.2014.02.011

Durability of fly ash based-geopolymers: effect of crystallization on mechanical properties

Zhang, Zuhua, Wang, Hao, Provis, John L., Reid, Andrew and Li, Qiang. 2013. "Durability of fly ash based-geopolymers: effect of crystallization on mechanical properties." Wensheng, Zhang (ed.) 8th International Symposium on Cement and Concrete (ISCC 2013). Nanjing, China 20 - 23 Sep 2013 Beijing, China.

Mechanical and thermal properties of jute fibre reinforced composites

Kabir, Mohammad Mazedul, Islam, Md Mainul and Wang, Hao. 2013. "Mechanical and thermal properties of jute fibre reinforced composites." Journal of Multifunctional Composites. 1 (1), pp. 71-77. https://doi.org/10.12783/issn.2168-4286/1.1/Islam

Vibration damping characteristics of short hemp fibre thermoplastic composites

Etaati, Amir, Mehdizadeh, Saman Abdanan, Wang, Hao and Pather, Selvan. 2014. "Vibration damping characteristics of short hemp fibre thermoplastic composites." Journal of Reinforced Plastics and Composites. 33 (4), pp. 330-341. https://doi.org/10.1177/0731684413512228

Hybrid sandwich panel with natural fibre composite intermediate layer: manufacturing process and significance analysis

Fajrin, Jauhar, Zhuge, Yan, Bullen, Frank and Wang, Hao. 2013. "Hybrid sandwich panel with natural fibre composite intermediate layer: manufacturing process and significance analysis." Malaysian Journal of Civil Engineering. 25 (Special issue 1), pp. 95-111.

Significance analysis of flexural behaviour of hybrid sandwich panels

Fajrin, Jauhar, Zhuge, Yan, Bullen, Frank and Wang, Hao. 2013. "Significance analysis of flexural behaviour of hybrid sandwich panels." Open Journal of Civil Engineering. 3 (3B), pp. 1-7. https://doi.org/10.4236/ojce.2013.33B001

Effectiveness of using fibre-reinforced polymer composites for underwater steel pipeline repairs

Shamsuddoha, Md, Islam, Md Mainul, Aravinthan, Thiru, Manalo, Allan and Lau, Kin-tak. 2013. "Effectiveness of using fibre-reinforced polymer composites for underwater steel pipeline repairs." Composite Structures. 100, pp. 40-54. https://doi.org/10.1016/j.compstruct.2012.12.019

Prediction of obsolete FBG sensor using ANN for efficient and robust operation of SHM systems

Kahandawa, Gayan C., Epaarachchi, Jayantha A., Wang, Hao and Lau, K. T.. 2013. "Prediction of obsolete FBG sensor using ANN for efficient and robust operation of SHM systems." 4th Asia-Pacific Workshop on Structural Health Monitoring (APWSHM 2012). Melbourne, Australia 05 - 07 Dec 2012 Zurich, Switzerland. https://doi.org/10.4028/www.scientific.net/KEM.558.546

Smart structure for small wind turbine blade

Supeni, E. E., Epaarachchi, J. A., Islam, M. M. and Lau, K. T.. 2013. "Smart structure for small wind turbine blade." Epaarachchi, Jayantha A., Lau, Alan Kin-tak and Leng, Jinsong (ed.) 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013). Gold Coast, Australia 10 - 12 Jul 2013 United States. https://doi.org/10.1117/12.2027725

Mechanical properties of epoxy grouts for structural repair

Shamsuddoha, M., Islam, M. M., Aravinthan, T., Manalo, A. C. and Lau, K. T.. 2013. "Mechanical properties of epoxy grouts for structural repair." Samali, Bijan, Attard, Mario M. and Song, Chongmin (ed.) 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM22). Sydney, Australia 11 - 14 Dec 2012 London, United Kingdom.

Effect of coarse filler on shrinkages and dynamic mechanical properties of epoxy grouts

Shamsuddoha, Md, Islam, Md Mainul, Aravinthan, Thiru, Manalo, Allan and Lau, Kin-Tak. 2014. "Effect of coarse filler on shrinkages and dynamic mechanical properties of epoxy grouts." Journal of Multifunctional Composites. 2 (1), pp. 61-66. https://doi.org/10.12783/issn.2168-4286/2.1/

Sustainable composites

Yousif, Belal F., Islam, Md Mainul and Salit, Mohd Sapuan. 2013. "Sustainable composites." Advances in Materials Science and Engineering. https://doi.org/10.1155/2013/142718

Confinement of C60 nanoparticles on the dynamics of polystyrene studied by anelastic spectroscopy and rheometrics

Fang, Zhengping, Shang, Shuying and Wang, Hao. 2013. "Confinement of C60 nanoparticles on the dynamics of polystyrene studied by anelastic spectroscopy and rheometrics." Epaarachchi, Jayantha A. , Lau, Alan Kin-tak and Leng, Jinsong (ed.) 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013). Gold Coast, Australia 10 - 12 Jul 2013 Bellingham, WA. United States. SPIE. https://doi.org/10.1117/12.2028373

Embedded fibre optic sensors under multi-axial loading: a pilot study

Peauril, J., Epaarachchi, J., Lau, K. T. and Wang, H.. 2013. "Embedded fibre optic sensors under multi-axial loading: a pilot study." Epaarachchi, Jayantha A. , Lau, Alan Kin-tak and Leng, Jinsong (ed.) 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013). Gold Coast, Australia 10 - 12 Jul 2013 Bellingham, WA. United States. SPIE. https://doi.org/10.1117/12.2027958

NIR fibre bragg grating as dynamic sensor: an application of 1D digital wavelet analysis for signal denoising

Hafizi, Z. M., Kahandawa, G. C., Epaarachchi, J., Lau, K. T., Canning, J. and Cook, K.. 2013. "NIR fibre bragg grating as dynamic sensor: an application of 1D digital wavelet analysis for signal denoising ." Epaarachchi, Jayantha A. , Lau, Alan Kin-tak and Leng, Jinsong (ed.) 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013). Gold Coast, Australia 10 - 12 Jul 2013 Bellingham, WA. United States. https://doi.org/10.1117/12.2026668

Characterisation of mechanical and thermal properties of epoxy grouts for composite repair of steel pipelines

Shamsuddoha, Md, Islam, Md Mainul, Aravinthan, Thiru, Manalo, Allan and Lau, Kin-tak. 2013. "Characterisation of mechanical and thermal properties of epoxy grouts for composite repair of steel pipelines." Materials and Design. 52, pp. 315-327. https://doi.org/10.1016/j.matdes.2013.05.068

Study on compressive properties of syntactic foams for marine applications

Salleh, Z., Islam, M. M. and Ku, H.. 2014. "Study on compressive properties of syntactic foams for marine applications." Journal of Multifunctional Composites. 2 (1), pp. 21-27. https://doi.org/10.12783/issn.2168-4286/2.1/Salleh

Effect of graphene nanosheets on morphology, thermal stability and flame retardancy of epoxy resin

Liu, Shan, Yan, Hongqiang, Fang, Zhengping and Wang, Hao. 2014. "Effect of graphene nanosheets on morphology, thermal stability and flame retardancy of epoxy resin ." Composites Science and Technology. 90, pp. 40-47. https://doi.org/10.1016/j.compscitech.2013.10.012

Fabrication process optimization of hemp fibre-reinforced polypropylene composites

Yan, Z. L., Zhang, J. C., Lin, G., Zhang, H., Ding, Y. and Wang, H.. 2013. "Fabrication process optimization of hemp fibre-reinforced polypropylene composites." Journal of Reinforced Plastics and Composites. 32 (20), pp. 1504-1512. https://doi.org/10.1177/0731684413501925

Improvement of mechanical properties of noil hemp fiber reinforced polypropylene composites by resin modification and fiber treatment

Yan, Zili, Zhang, Jianchun, Zhang, Hua and Wang, Hao. 2013. "Improvement of mechanical properties of noil hemp fiber reinforced polypropylene composites by resin modification and fiber treatment." Advances in Materials Science and Engineering. 2013, pp. 1-7. https://doi.org/10.1155/2013/941617

Indexing damage using distortion of embedded FBG sensor response spectra

Kahandawa, Gayan C., Epaarachchi, Jayantha A. and Lau, K. T.. 2013. "Indexing damage using distortion of embedded FBG sensor response spectra ." Epaarachchi, Jayantha A. , Lau, Alan Kin-tak and Leng, Jinsong (ed.) 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013). Gold Coast, Australia 10 - 12 Jul 2013 Bellingham, WA. United States. https://doi.org/10.1117/12.2027945

Extraction and processing of real time strain of embedded FBG sensors using a fixed filter FBG circuit and an artificial neural network

Kahandawa, Gayan C., Epaarachchi, Jayantha, Wang, Hao, Canning, John and Lau, K. T.. 2013. "Extraction and processing of real time strain of embedded FBG sensors using a fixed filter FBG circuit and an artificial neural network." Measurement. 46 (10), pp. 4045-4051. https://doi.org/10.1016/j.measurement.2013.07.029

Development of artificial neural network model in predicting performance of the smart wind turbine blade

Supeni, E. E., Epaarachchi, J. A., Islam, M. M. and Lau, K. T.. 2013. "Development of artificial neural network model in predicting performance of the smart wind turbine blade." 3rd Malaysian Postgraduate Conference (MPC 2013). Sydney, Australia 04 - 05 Jul 2013 Sydney, Australia.

Textile material forms for reinforcement materials: a review

Misnon, M. I., Islam, M. M., Epaarachchi, J. and Lau, K. T.. 2013. "Textile material forms for reinforcement materials: a review." 3rd Malaysian Postgraduate Conference (MPC 2013). Sydney, Australia 04 - 05 Jul 2013 Sydney, Australia.

Wave propogation scattering due to defect on thin composite plates

Hafizi, Z. M., Epaarachchi, J. and Lau, K. T.. 2013. "Wave propogation scattering due to defect on thin composite plates." 3rd Malaysian Postgraduate Conference (MPC 2013). Sydney, Australia 04 - 05 Jul 2013 Sydney, Australia.

Tensile behaviours of activated carbon coconut shell filled epoxy composites

Salleh, Z., Islam, M. M. and Ku, H.. 2013. "Tensile behaviours of activated carbon coconut shell filled epoxy composites." Noor, M. M., Rahman, M. M. and Ismail, J. (ed.) 3rd Malaysian Postgraduate Conference (MPC 2013). Sydney, Australia 04 - 05 Jul 2013 Sydney, Australia.

Estimation of strain of distorted FBG sensor spectra using a fixed FBG filter circuit and an artificial neural network

Kahandawa, Gayan C., Epaarachchi, Jayantha, Lau, K. T. and Canning, John. 2013. "Estimation of strain of distorted FBG sensor spectra using a fixed FBG filter circuit and an artificial neural network ." Palaniswami, M., Leckie, C., Kanhere, S. and Gubbi, J. (ed.) IEEE 8th International Conference on Intelligent Sensors, Sensor Networks and Information Processing (ISSNIP 2013): Sensing the Future. Melbourne, Australia 02 - 05 Apr 2013 Piscataway, NJ. United States. https://doi.org/10.1109/ISSNIP.2013.6529770

Effect of the energy absorbing mechanisms on the blunt thoracic trauma caused by a typical foam projectile

Thota, Narasimha M., Epaarachchi, Jayantha A. and Lau, Kin-tak. 2013. "Effect of the energy absorbing mechanisms on the blunt thoracic trauma caused by a typical foam projectile." Mishra, G. C. and Sanskriti, Krishi (ed.) 3rd World Congress on Frontiers of Mechanical, Aerospace and Automotive Engineering (WCFMAAE 2013). New Delhi, India 02 - 03 Feb 2013 New Delhi, India.

Effect of the foam embellishments on the pedestrian safety of the vehicle front protection systems

Thota, N. M., Epaarachchi, J. A. and Lau, K. T.. 2013. "Effect of the foam embellishments on the pedestrian safety of the vehicle front protection systems." Mishra, G. C. and Sanskriti, Krishi (ed.) 3rd World Congress on Frontiers of Mechanical, Aerospace and Automotive Engineering (WCFMAAE 2013). New Delhi, India 02 - 03 Feb 2013 New Delhi, India.

Quantitative kinetic and structural analysis of geopolymers Part 2. thermodynamics of sodium silicate activation of metakaolin

Zhang, Zuhua, Provis, John L., Wang, Hao, Bullen, Frank and Reid, Andrew. 2013. "Quantitative kinetic and structural analysis of geopolymers Part 2. thermodynamics of sodium silicate activation of metakaolin." Thermochimica Acta. 565, pp. 163-171. https://doi.org/10.1016/j.tca.2013.01.040

Effects of chemical treatments on hemp fibre structure

Kabir, M. M., Wang, H., Lau, K. T. and Cardona, F.. 2013. "Effects of chemical treatments on hemp fibre structure." Applied Surface Science. 276, pp. 13-23. https://doi.org/10.1016/j.apsusc.2013.02.086

Tensile properties of chemically treated hemp fibres as reinforcement for composites

Kabir, M. M., Wang, H., Lau, K. T. and Cardona, F.. 2013. "Tensile properties of chemically treated hemp fibres as reinforcement for composites." Composites Part B: Engineering. 53, pp. 362-368. https://doi.org/10.1016/j.compositesb.2013.05.048

Damage modelling of repeatedly impacted square fibre reinforced polymer composite tube

Guades, Ernesto, Aravinthan, Thiru, Manalo, Allan and Islam, Mainul. 2013. "Damage modelling of repeatedly impacted square fibre reinforced polymer composite tube." Materials and Design. 47, pp. 687-697. https://doi.org/10.1016/j.matdes.2012.12.051

Fibre composites for high pressure pipeline repairs, in-air and subsea: an overview

Shamsuddoha, Md, Islam, Md Mainul, Aravinthan, Thiru, Manalo, Allan, Lau, Kin-tak and Elder, David. 2012. "Fibre composites for high pressure pipeline repairs, in-air and subsea: an overview." Ueda, Tamon (ed.) 3rd Asia-Pacific Conference on FRP in Structures (APFIS 2012). Sapporo, Japan 02 - 04 Feb 2012 Hokkaido, Japan.

Behaviour of pultruded FRP hollow sections under eccentric loading

Islam, Md Mainul, Aravinthan, Thiru and Williams, Paul Garreth. 2012. "Behaviour of pultruded FRP hollow sections under eccentric loading." Monti, Georgio (ed.) 6th International Conference on FRP Composites in Civil Engineering (CICE 2012). Rome, Italy 13 - 15 Jun 2012 Rome, Italy.

Silk fibers and their unidirectional polymer composites

Ahmed, Mansur, Islam, Md Saiful, Ahsan, Qumrul and Islam, Md Mainul. 2012. "Silk fibers and their unidirectional polymer composites." Thomas, Sabu, Ninan, Neethu, Mohan, Mohan and Francis, Elizabeth (ed.) Natural polymers, biopolymers, biomaterials, and their composites, blends, and IPNs. Oakville, ON. Canada . Apple Academic Press (CRC Press). pp. 79-90

3D X-ray microtomography study on fibre breakage in noil hemp fibre reinforced polypropylene composites

Etaati, A., Wang, H., Pather, S., Yan, Z. and Mehdizadeh, S. Abdanan. 2013. "3D X-ray microtomography study on fibre breakage in noil hemp fibre reinforced polypropylene composites." Composites Part B: Engineering. 50, pp. 239-246. https://doi.org/10.1016/j.compositesb.2013.02.029

Non-velocity based analysis of passive ultrasonic signal for source location detection in composite plates: a pilot study

Hafizi, Z. M., Epaarachchi, J., Nizwan, C. K. E. and Lau, K. T.. 2012. "Non-velocity based analysis of passive ultrasonic signal for source location detection in composite plates: a pilot study." 1st International Conference of Mechanical Engineering Research (ICMER 2011). Kuantan, Malaysia 05 - 07 Dec 2011 Bristol, United Kingdom . https://doi.org/10.1088/1757-899X/36/1/012008

Numerical simulation of porosity on thermal properties and fire resistance of foamed concrete

Li, Qiang, Wang, Hao, Zhang, Zuhua and Reid, Andrew. 2013. "Numerical simulation of porosity on thermal properties and fire resistance of foamed concrete." Journal of Sustainable Cement-Based Materials. 2 (1), pp. 13-19. https://doi.org/10.1080/21650373.2012.755748

Modal acoustic emission investigation for progressive failure monitoring in thin composite plates under tensile test

Hafizi, Mohd Zohari, Epaarachchi, Jayantha Ananda and Lau, K. T.. 2013. "Modal acoustic emission investigation for progressive failure monitoring in thin composite plates under tensile test." Key Engineering Materials. 558 (558), pp. 65-75. https://doi.org/10.4028/www.scientific.net/KEM.558.65

Mechanical property and structure of alkali-activated fly ash and slag blends

Yang, Tao, Yao, Xiao, Zhang, Zuhua and Wang, Hao. 2012. "Mechanical property and structure of alkali-activated fly ash and slag blends." Journal of Sustainable Cement-Based Materials. 1 (4), pp. 167-178. https://doi.org/10.1080/21650373.2012.752621

Optimized FBG sensor network for efficient detection of a delamination in FRP structures

Kahandawa, G. C., Epaarachchi, J. A., Wang, H. and Lau, K. T.. 2012. "Optimized FBG sensor network for efficient detection of a delamination in FRP structures." Jaafar, M., Azura, A. R., Leong, K. H. and Leong, A. Y. L. (ed.) 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today. Kuala Lumpur, Malaysia 06 - 08 Nov 2012 Kowloon, Hong Kong.

Detecting delamination in a composite structure using an embedded FBG-AE hybrid system

Kahandawa, G. C., Hafizi, Z. M., Epaarachchi, J. and Lau, K. T.. 2012. "Detecting delamination in a composite structure using an embedded FBG-AE hybrid system." Kotousov, Andrei (ed.) 7th Australasian Congress on Applied Mechanics (ACAM 2012). Adelaide, Australia 09 - 12 Dec 2012 Canberra, Australia.

Modelling of tensile properties glass powder/epoxy composites post-cured in an oven and in microwaves

Ku, H., Epaarachchi, J., Trada, M. and Wong, P.. 2013. "Modelling of tensile properties glass powder/epoxy composites post-cured in an oven and in microwaves ." Journal of Reinforced Plastics and Composites. 32 (10), pp. 689-699. https://doi.org/10.1177/0731684412475333

Fabrication process optimization of hemp fibre reinforced polypropylene composites

Yan, Z. L., Wang, H., Lau, K. T., Zhang, J. C., Zhang, H. and Ding, Y.. 2012. "Fabrication process optimization of hemp fibre reinforced polypropylene composites." Jaafar, M., Azura, A. R., Leong, K. H. and Leong, A. Y L. (ed.) 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today. Kuala Lumpur, Malaysia 06 - 08 Nov 2012 Kowloon, Hong Kong.

Mechanical properties of a bamboo charcoal reinforced polylactic acid composite

Ho, M. P., Wang, H., Lau, K. T., Jayaraman, K. and Bhattacharyya, D.. 2012. "Mechanical properties of a bamboo charcoal reinforced polylactic acid composite." Jaafar, M., Azura, A. R., Leong, K. H. and Leong, A. Y. (ed.) 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today. Kuala Lumpur, Malaysia 06 - 08 Nov 2012 Kowloon, Hong Kong.

An investigation of effective detection length of a localized micro-failure in a laminated thin composite plate using FBG sensor integrated AE system

Hafizi, Z. M., Epaarachchi, J. and Lau, K. T.. 2012. "An investigation of effective detection length of a localized micro-failure in a laminated thin composite plate using FBG sensor integrated AE system." Jaafar, M., Azura, A. R., Leong, K. H. and Leong, A. Y. L. (ed.) 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today. Kuala Lumpur, Malaysia 06 - 08 Nov 2012 Kowloon, Hong Kong.

The reactivity of fly ash in geopolymer synthesis: a qualification study by FTIR

Zhang, Z., Wang, H. and Provis, J. L.. 2012. "The reactivity of fly ash in geopolymer synthesis: a qualification study by FTIR ." Jaafar, M., Azura, A. R., Leong, K. H. and Leong, A. Y. L. (ed.) 8th Asian-Australasian Conference on Composite Materials (ACCM 8): Enabling Tomorrow's Industry Today . Kuala Lumpur, Malaysia 06 - 08 Nov 2012 Kowloon, Hong Kong.

A pilot study on flexural properties of epoxy nanoclay reinforced composites

Ku, H., Fung, S. Y., Islam, M., Li, X. and Chong, Y. P.. 2013. "A pilot study on flexural properties of epoxy nanoclay reinforced composites ." Journal of Reinforced Plastics and Composites. 32 (2), pp. 96-104. https://doi.org/10.1177/0731684412459246

Development of smart wind turbine blades

Supeni, E. E., Epaarachchi, J. A., Islam, M. M. and Lau, K. T.. 2012. "Development of smart wind turbine blades." Jaafar, M., Azura, A. R., Leong, K. H and Leong, A. Y. L (ed.) 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today. Kuala Lumpur, Malaysia 06 - 08 Nov 2012 Kowloon, Hong Kong.

Semisolid processing technology

Xie, Shuisheng, Li, Xinggang, Wang, Hao and Zhang, Ying. 2012. Semisolid processing technology. Beijing, China. Metallurgical Industry Press.

Thermal properties and structure conformation on silkworm silk fibre

Ho, Mei-po, Wang, Hao and Lau, Kin-tak. 2012. "Thermal properties and structure conformation on silkworm silk fibre." Heslehurst, Rikard Benton and Byrne, Ann (ed.) Composites Australia and the CRC for Advanced Composite Structures Conference 2012: Diversity in Composites. Leura, Australia 15 - 16 Mar 2012 Melbourne, Australia.

Compressive properties of chemically-treated hemp fibre reinforced composites

Kabir, Mohammad Mazedul, Wang, Hao, Lau, Alan, Cardona, Francisco and Aravinthan, Thiru. 2012. "Compressive properties of chemically-treated hemp fibre reinforced composites." Heslehurst, Rikard Benton and Byrne, Ann (ed.) Composites Australia and the CRC for Advanced Composite Structures Conference 2012: Diversity in Composites. Leura, Australia 15 - 16 Mar 2012 Melbourne, Australia.

Stiffness of FRP pultruded tubes under repeated axial impacts

Guades, Ernesto J., Aravinthan, Thiru, Islam, Md. Mainul and Manalo, Allan C.. 2012. "Stiffness of FRP pultruded tubes under repeated axial impacts." Ueda, Tamon (ed.) 3rd Asia-Pacific Conference on FRP in Structures (APFIS 2012). Sapporo, Japan 02 - 04 Feb 2012 Hokkaido, Japan.

Develop and validate a biomechanical surrogate of the human thorax using corrugated sheets: a feasibility study

Thota, Narasimha Murthy, Eepaarachchi, Jayantha A. and Lau, K. T.. 2012. "Develop and validate a biomechanical surrogate of the human thorax using corrugated sheets: a feasibility study." 7th Australasian Congress on Applied Mechanics (ACAM 2012). Adelaide, Australia 09 - 12 Dec 2012 Canberra, Australia.

Predicting the flow stress behavior of Ni-42.5Ti-3Cu during hot deformation using constitutive equations

Etaati, Amir, Dehghani, Kamran, Ebrahimi, G. R. and Wang, Hao. 2013. "Predicting the flow stress behavior of Ni-42.5Ti-3Cu during hot deformation using constitutive equations." Metals and Materials International. 19 (1), pp. 5-9. https://doi.org/10.1007/s12540-013-1002-9

Effects of energy level and impact repetitions on the impact fatigue behaviour and post-impact flexural properties of square FRP pultruded tubes

Guades, E. J., Aravinthan, T., Manalo, A. C. and Islam, M. M.. 2013. "Effects of energy level and impact repetitions on the impact fatigue behaviour and post-impact flexural properties of square FRP pultruded tubes." Samali, Bijan, Attard, Mario M. and Song, Chongmin (ed.) 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM22). Sydney, Australia 11 - 14 Dec 2012 London, United Kingdom.

Use of fixed wavelength Fibre-Bragg Grating (FBG) filters to capture time domain data from the distorted spectrum of an embedded FBG sensor to estimate strain with an artificial neural network

Kahandawa, G. C., Epaarachchi, J. A., Wang, H., Followell, D. and Birt, P.. 2013. "Use of fixed wavelength Fibre-Bragg Grating (FBG) filters to capture time domain data from the distorted spectrum of an embedded FBG sensor to estimate strain with an artificial neural network." Sensors and Actuators A: Physical. 194, pp. 1-7. https://doi.org/10.1016/j.sna.2012.12.028

Quantitative kinetic and structural analysis of geopolymers. Part 1. The activation of metakaolin with sodium hydroxide

Zhang, Zuhua, Wang, Hao, Provis, John L., Bullen, Frank, Reid, Andrew and Zhu, Yingcan. 2012. "Quantitative kinetic and structural analysis of geopolymers. Part 1. The activation of metakaolin with sodium hydroxide." Thermochimica Acta. 539, pp. 23-33. https://doi.org/10.1016/j.tca.2012.03.021

Sandwich composites made of syntactic foam core and paper skin: manufacturing and mechanical behavior

Islam, Md Mainul and Kim, Ho Sung. 2012. "Sandwich composites made of syntactic foam core and paper skin: manufacturing and mechanical behavior." Journal of Sandwich Structures and Materials. 14 (1), pp. 111-127. https://doi.org/10.1177/1099636211413564

Design of smart structures for wind turbine blades

Supeni, E. E., Epaarachchi, J. A., Islam, M. M. and Lau, K. T.. 2012. "Design of smart structures for wind turbine blades." Noor, M. M., Rahman, M. M. and Ismail, J. (ed.) 2nd Malaysian Postgraduate Conference (MPC 2012). Gold Coast, Australia 07 - 09 Jul 2012 Sydney, Australia.

Numerical simulation of porous structure in foam concrete on thermal insulation property

Li, Qiang, Wang, Hao, Bullen, Frank and Reid, Andrew. 2012. "Numerical simulation of porous structure in foam concrete on thermal insulation property ." Jaafar, M, Azura, A. R., Leong, K. H. and Leong, A. Y. L. (ed.) 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today. Kuala Lumpur, Malaysia 06 - 08 Nov 2012 Kowloon, Hong Kong.

A study on the dynamic mechanical properties of silk fibre composites

Ho, Mei-po, Wang, Hao, Ho, Chun-kit and Lau, Kin-tak. 2012. "A study on the dynamic mechanical properties of silk fibre composites." Advanced Materials Research. 410, pp. 106-109. https://doi.org/10.4028/www.scientific.net/AMR.410.106

Effects of ground granulated blast furnace slag on the mechanical and microstructure of fly ash-based geopolymer binders

Yang, T., Yao, X., Zhang, Z. and Wang, H.. 2012. "Effects of ground granulated blast furnace slag on the mechanical and microstructure of fly ash-based geopolymer binders." 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today. Kuala Lumpur, Malaysia 06 - 08 Nov 2012 Kowloon, Hong Kong.

Quantitative study of the reactivity of fly ash in geopolymerization by FTIR

Zhang, Zuhua, Wang, Hao and Provis, John L.. 2012. "Quantitative study of the reactivity of fly ash in geopolymerization by FTIR." Journal of Sustainable Cement-Based Materials. 1 (4), pp. 154-166. https://doi.org/10.1080/21650373.2012.752620

Effect of degumming time on silkworm silk fibre for biodegradable polymer composites

Ho, Mei-po, Wang, Hao and Lau, Kin-tak. 2012. "Effect of degumming time on silkworm silk fibre for biodegradable polymer composites." Applied Surface Science. 258 (8), pp. 3948-3955. https://doi.org/10.1016/j.apsusc.2011.12.068

Chemical treatments on plant-based natural fibre reinforced polymer composites: an overview

Kabir, M. M., Wang, H., Lau, K. T. and Cardona, F.. 2012. "Chemical treatments on plant-based natural fibre reinforced polymer composites: an overview ." Composites Part B: Engineering. 43 (7), pp. 2883-2892. https://doi.org/10.1016/j.compositesb.2012.04.053

Interfacial bonding and degumming effects on silk fibre/polymer biocomposites

Ho, Mei-po, Wang, Hao, Lau, Kin-tak, Lee, Joong-hee and Hui, David. 2012. "Interfacial bonding and degumming effects on silk fibre/polymer biocomposites ." Composites Part B: Engineering. 43 (7), pp. 2801-2812. https://doi.org/10.1016/j.compositesb.2012.04.042

Potential application of geopolymers as protection coatings for marine concrete III. Field experiment

Zhang, Zuhua, Yao, Xiao and Wang, Hao. 2012. "Potential application of geopolymers as protection coatings for marine concrete III. Field experiment ." Applied Clay Science. 67-68, pp. 57-60. https://doi.org/10.1016/j.clay.2012.05.008

Experimental investigation on the behaviour of square FRP composite tubes under repeated axial impact

Guades, Ernesto, Aravinthan, Thiru, Manalo, Allan and Islam, Mainul. 2013. "Experimental investigation on the behaviour of square FRP composite tubes under repeated axial impact." Composite Structures. 97, pp. 211-221. https://doi.org/10.1016/j.compstruct.2012.10.033

Signal monitoring system and methods of operating same

Kahandawa, Gayan Chanaka, Epaarachchi, Jayantha and Wang, Hao. 2013. Signal monitoring system and methods of operating same. WO/2013/151607

A review on the driving performance of FRP composite piles

Guades, Ernesto, Aravinthan, Thiru, Islam, Mainul and Manalo, Allan. 2012. "A review on the driving performance of FRP composite piles." Composite Structures. 94 (6), pp. 1932-1942. https://doi.org/10.1016/j.compstruct.2012.02.004

New concept for optimal application of natural fibre reinforced plastic (NFRP) in building construction

Fajrin, Jauhar, Zhuge, Yan, Bullen, Frank and Wang, Hao. 2012. "New concept for optimal application of natural fibre reinforced plastic (NFRP) in building construction ." Noor, Norhazilan and Ismail, Mohammad (ed.) 8th Asia Pacific Structural Engineering and Construction Conference and 1st International Conference on Civil Engineering Research (APSEC-ICCER 2012): Sustaining the World with Better Structures and Construction Practice. Surabaya, Indonesia 02 - 04 Oct 2012 Johor, Malaysia.

Modal analysis of high frequency acoustic signal approach for progressive failure monitoring in thin composite plates

Hafizi, Z. M., Epaarachchi, J. and Lau, K. T.. 2012. "Modal analysis of high frequency acoustic signal approach for progressive failure monitoring in thin composite plates." 2nd Malaysian Postgraduate Conference (MPC 2012). Gold Coast, Australia 07 - 09 Jul 2012 Sydney, Australia.

Reinforcement of polypropylene with hemp fibres

Yan, Z. L., Wang, H., Lau, K. T., Pather, S., Zhang, J. C., Lin, G. and Ding, Y.. 2013. "Reinforcement of polypropylene with hemp fibres." Composites Part B: Engineering. 46, pp. 221-226. https://doi.org/10.1016/j.compositesb.2012.09.027

Effects of halloysite in kaolin on the formation and properties of geopolymers

Zhang, Z., Wang, H., Yao, X. and Zhu, Y.. 2012. "Effects of halloysite in kaolin on the formation and properties of geopolymers." Cement and Concrete Composites. 34 (5), pp. 709-715. https://doi.org/10.1016/j.cemconcomp.2012.02.003

Critical factors on manufacturing processes of natural fibre composites

Ho, Mei-po, Wang, Hao, Lee, Joong-Hee, Ho, Chun-kit, Lau, Kin-tak, Leng, Jinsong and Hui, David. 2012. "Critical factors on manufacturing processes of natural fibre composites." Composites Part B: Engineering. 43 (8), pp. 3549-3562. https://doi.org/10.1016/j.compositesb.2011.10.001

Effect of silk fiber to the mechanical and thermal properties of its biodegradable composites

Ho, Mei-Po, Wang, Hao, Lau, Kin-Tak and Leng, Jinsong. 2013. "Effect of silk fiber to the mechanical and thermal properties of its biodegradable composites ." Journal of Applied Polymer Science. 127 (4), pp. 2389-2396. https://doi.org/10.1002/app.37539

Mechanical properties of chemically-treated hemp fibre reinforced sandwich composites

Kabir, M. M., Wang, H., Lau, K. T., Cardona, F. and Aravinthan, T.. 2012. "Mechanical properties of chemically-treated hemp fibre reinforced sandwich composites." Composites Part B: Engineering. 43 (2), pp. 159-169. https://doi.org/10.1016/j.compositesb.2011.06.003

Observation and prediction of the hot tear susceptibility of ternary Al-Si-Mg alloys

Easton, Mark A., Wang, Hao, Grandfield, John, Davidson, Cameron J., StJohn, David H., Sweet, Lisa D. and Couper, Malcolm J.. 2012. "Observation and prediction of the hot tear susceptibility of ternary Al-Si-Mg alloys." Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 43 (9), pp. 3227-3238. https://doi.org/10.1007/s11661-012-1132-6

Compressive strength characterization of polyester based fillers

Sirimanna, Chamila Sampath, Lokuge, Weena, Islam, Md Mainul and Aravinthan, Thiru. 2012. "Compressive strength characterization of polyester based fillers." Advanced Materials Research. https://doi.org/10.4028/www.scientific.net/AMR.410.32

Use of FBG sensors for SHM in aerospace structures

Kahandawa, Gayan C., Epaarachchi, Jayantha, Wang, Hao and Lau, K. T.. 2012. "Use of FBG sensors for SHM in aerospace structures." Photonic Sensors. 2 (3), pp. 203-214. https://doi.org/10.1007/s13320-012-0065-4

Numerical simulation the temperature field of the multi-coil batch during annealing process in Bell-type furnace

Mo, Chun-li, Li, Qiang, Guo, Xu-ming and Wang, Hao. 2012. "Numerical simulation the temperature field of the multi-coil batch during annealing process in Bell-type furnace." 2nd International Conference on Advanced Engineering Materials and Technology (AEMT 2012). Zhuhai, China 06 Jul 2012 Zurich, Switzerland. https://doi.org/10.4028/www.scientific.net/AMR.538-541.637

The effect of fibre chemical treatments on hemp reinforced composites

Wang, H., Kabir, M. M. and Lau, K. T.. 2011. "The effect of fibre chemical treatments on hemp reinforced composites ." 18th International Conference on Composite Materials (ICCM-18). Jeju, Korea 21 - 26 Aug 2011 Seoul, Korea.

Natural fibre composites with QLD based fibres and vegetable oils

Manthey, N. W., Cardona, F., Aravinthan, T., Wang, H. and Cooney, T.. 2011. "Natural fibre composites with QLD based fibres and vegetable oils." Fragomeni, Sam, Venkatesan, Srikanth, Lam, Nelson T. K. and Setunge, Sujeeva (ed.) 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM 21). Melbourne, Australia 07 - 10 Dec 2010 Leiden, Netherlands.

The implementation of statistical inference to study the bending strength of sustainable hybrid sandwich panel composite

Fajrin, Jauhar, Zhuge, Yan, Bullen, Frank and Wang, Hao. 2011. "The implementation of statistical inference to study the bending strength of sustainable hybrid sandwich panel composite." Advanced Materials Research. 250-253, pp. 956-961. https://doi.org/10.4028/www.scientific.net/AMR.250-253.956

Driveability of composite piles

Guades, E. J., Aravinthan, T. and Islam, M. M.. 2011. "Driveability of composite piles." Cowled, Craig J. L. (ed.) 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing (eddBE 2011). Brisbane, Australia 27 - 29 Apr 2011 Brisbane, Australia.

Effects of fly ash source and curing procedure on strength development of geopolymers

Zhang, Z., Wang, H., Reid, A. and Aravinthan, T.. 2011. "Effects of fly ash source and curing procedure on strength development of geopolymers." Fragomeni, Sam, Venkatesan, Srikanth, Lam, Nelson and Setunge, Sujeeva (ed.) 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM 21). Melbourne, Australia 07 - 10 Dec 2010 London, United Kingdom.

Effect of chemical treatment on the mechanical and thermal properties of hemp fibre reinforced thermoset sandwich composites

Kabir, M. M., Wang, H., Cardona, F. and Aravinthan, T.. 2011. "Effect of chemical treatment on the mechanical and thermal properties of hemp fibre reinforced thermoset sandwich composites." Fragomeni, Sam, Venkatesan, Srikanth, Lam, Nelson T. K. and Setunge, Sujeeva (ed.) 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM 21). Melbourne, Australia 07 - 10 Dec 2010 Leiden, Netherlands. https://doi.org/10.1201/b10571-78

Mechanical properties of an injected silk fibre reinforced PLA composite

Ho, Mei-Po, Lau, Kin-tak, Wang, Hao and Bhattacharyya, Debes. 2011. "Mechanical properties of an injected silk fibre reinforced PLA composite." Bhattacharyya, D., Lin, R. J. T. and Srivatsan, T. S. (ed.) 19th International Symposium on Processing and Fabrication of Advanced Materials (PFAM XIX). Auckland, New Zealand 14 - 17 Jan 2011 Auckland, New Zealand.

Behaviour of fibre composite pile under axial compression load

Guades, E. J., Sirimanna, C. S., Aravinthan, T. and Islam, M. M.. 2011. "Behaviour of fibre composite pile under axial compression load." Venkatesan, Srikanth, Lam, Nelson T. K. and Setunge, Sujeeva (ed.) 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM 21). Melbourne, Australia 07 - 10 Dec 2010 Leiden, Netherlands. https://doi.org/10.1201/b10571-81

Preliminary development of polymer based filler materials for GFRP tubular connector

Sirimanna, C. S., Islam, M. M. and Aravinthan, T.. 2011. "Preliminary development of polymer based filler materials for GFRP tubular connector." Fragomeni, Sam, Venkatesan, Srikanth, Lam, Nelson T. K. and Setunge, Sujeeva (ed.) 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM 21). Melbourne, Australia 07 - 10 Dec 2010 Leiden, Netherlands. https://doi.org/10.1201/b10571-79

Behaviour of fibre composite sandwich panels under uniformly distributed loading

Islam, M. M. and Aravinthan, T.. 2011. "Behaviour of fibre composite sandwich panels under uniformly distributed loading." Fragomeni, Sam, Venkatesan, Srikanth, Lam, Nelson T. K. and Setunge, Sujeeva (ed.) 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM 21). Melbourne, Australia 07 - 10 Dec 2010 Leiden, Netherlands. https://doi.org/10.1201/b10571-77

Flexural strength of sandwich panel with lignocellulosic composites intermediate layer: a statistic approach

Fajrin, Jauhar, Zhuge, Yan, Bullen, Frank and Wang, Hao. 2011. "Flexural strength of sandwich panel with lignocellulosic composites intermediate layer: a statistic approach." International Journal of Protective Structures. 2 (4), pp. 453-464. https://doi.org/10.1260/2041-4196.2.4.453

In vitro biodegradation behavior of magnesium and magnesium alloy

Wang, Hao and Shi, Zhiming. 2011. "In vitro biodegradation behavior of magnesium and magnesium alloy ." Journal of Biomedical Materials Research Part B: Applied Biomaterials. 98B (2), pp. 203-209. https://doi.org/10.1002/jbm.b.31769

Numerical simulation of rolling process and microstructure evolution of AM50 Mg alloy during hot rolling process

Hua, Fuan, Zhang, Chaoyi, Li, Qiang, Yu, Baoyi, Liu, Weihua, Li, Runxia, Xie, Shuisheng, Huang, Guojie, Cheng, Lei, Fu, Yao and Wang, Hao. 2011. "Numerical simulation of rolling process and microstructure evolution of AM50 Mg alloy during hot rolling process ." Advanced Materials Research. 291-294, pp. 449-454. https://doi.org/10.4028/www.scientific.net/AMR.291-294.449

Influence of fly ash proportions on properties of polymer concrete with polyester resin

Lokuge, Weena, Aravinthan, Thiru, Sirimanna, Chamila Sampath and Islam, Mainul. 2011. "Influence of fly ash proportions on properties of polymer concrete with polyester resin." 25th Biennial Conference of the Concrete Institute of Australia (Concrete 2011): Building a Sustainable Future. Perth, Australia 12 - 14 Oct 2011 Sydney, Australia.

An investigation on the student performance in first year fundamental engineering course engineering statistics

Islam, Md Mainul and Epaarachchi, Jayantha Ananda. 2012. "An investigation on the student performance in first year fundamental engineering course engineering statistics." Mortimer, Rachel (ed.) 15th International First Year in Higher Education Conference (FYHE 2012) . Brisbane, Australia 26 - 29 Jun 2012 Brisbane, Australia.

An experimental investigation of early damage localization for thin glass fibre reinforced symmetric composite laminates

Hafizi, Z. M., Epaarachchi, J. and Lau, K. T.. 2012. "An experimental investigation of early damage localization for thin glass fibre reinforced symmetric composite laminates." Heslehurst, Rikard Benton and Byrne, Ann (ed.) Composites Australia and the CRC for Advanced Composite Structures Conference 2012: Diversity in Composites. Leura, Australia 15 - 16 Mar 2012 Melbourne, Australia.

Deformation behaviour of aluminum alloy A356 in semisolid state

Wang, H. and Ning, Z. L.. 2009. "Deformation behaviour of aluminum alloy A356 in semisolid state ." Aravinthan, Thiru, Karunasena, Warna (Karu) and Wang, Hao (ed.) 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM20). Toowoomba, Australia 02 - 05 Dec 2008 London, United Kingdom.

Influence of casting temperature on the thermal stability of Cu- and Zr-based metallic glasses: theoretical analysis and experiments

Zhu, Z. W., Zhang, H. F., Wang, H., Ding, B. Z. and Hu, Z. Q.. 2008. "Influence of casting temperature on the thermal stability of Cu- and Zr-based metallic glasses: theoretical analysis and experiments." Journal of Materials Research. 23 (10), pp. 2714-2719. https://doi.org/10.1557/jmr.2008.0335

Solidification microstructure modelling using cellular automaton method

Wang, H. and Li, Q.. 2008. "Solidification microstructure modelling using cellular automaton method." International Conference on Frontiers in Materials Science and Technology (FMST 2008). Brisbane, Australia 26 - 28 Mar 2008 Zurich, Switzerland. https://doi.org/10.4028/www.scientific.net/AMR.32.271

The development of a new grain refiner for magnesium alloys using the edge-to-edge model

Fu, H. M., Qiu, D., Zhang, M. X., Wang, H., Kelly, P. M. and Taylor, J. A.. 2008. "The development of a new grain refiner for magnesium alloys using the edge-to-edge model." Journal of Alloys and Compounds. 456 (1-2), pp. 390-394. https://doi.org/10.1016/j.jallcom.2007.02.076

Cu-based bulk amorphous alloy with larger glass-forming ability and supercooled liquid region

Fu, H. M., Zhang, H. F., Wang, H. and Hu, Z. Q.. 2008. "Cu-based bulk amorphous alloy with larger glass-forming ability and supercooled liquid region." Journal of Alloys and Compounds. 458 (1-2), pp. 390-393. https://doi.org/10.1016/j.jallcom.2007.03.114

Study of biodegradation of pure magnesium

Ren, Yibin, Wang, Hao, Huang, Jingjing, Zhang, Bingchun and Yang, Ke. 2007. "Study of biodegradation of pure magnesium." Kim, Young-Ha, Cho, Chong-Su, Kang, Inn-Kyu, Kim, Suk Young and Kwon, Oh Hyeong (ed.) ASBM7: 7th Asian Symposium on Biomedical Materials. Jeju, Korea 20 - 23 Aug 2006 Switzerland. https://doi.org/10.4028/www.scientific.net/KEM.342-343.601

The use of simulated games in an undergraduate course manufacturing processes

Pather, Selvan and Wang, Hao. 2009. "The use of simulated games in an undergraduate course manufacturing processes." Kestell, Colin, Grainger, Steven and Cheung, John (ed.) 20th Annual Conference for the Australasian Association of Engineering Education (AAEE 2009). Adelaide, Australia 06 - 09 Dec 2009 Adelaide, Australia.

Development of hot drawing process for nitinol tube

Chen, Wei, Wang, H., Zhang, Lei and Tang, Xiushan. 2009. "Development of hot drawing process for nitinol tube." International Journal of Modern Physics B. 23 (6/7), pp. 1968-1974. https://doi.org/10.1142/S0217979209061913

Fabrication of bulk amorphous Mg65Cu25Gd10 alloy of 12mm rod by water quenching

Liu, W. Y., Zhang, H. F., Hu, Z. Q., Wang, H. and Yao, X. D.. 2005. "Fabrication of bulk amorphous Mg65Cu25Gd10 alloy of 12mm rod by water quenching." Ke, W., Han, E. H., Han, Y. F., Kainer, K. and Luo, A. A. (ed.) Magnesium – Science, Technology and Applications. Zurich, Switzerland. Trans Tech Publications. pp. 211-214

Modeling of columnar-to-equiaxed transition in solidified Al-Si alloys

Yao, Xiangdong, Wang, Hao, He, B. and Zhou, X.. 2005. "Modeling of columnar-to-equiaxed transition in solidified Al-Si alloys." Zhong, Z., Saka, H., Kim, T. H., Holm, E. A., Han, Y. and Xie, X. (ed.) 5th Pacific Rim International Conference on Advanced Materials and Processing (PRICM 5). Beijing, China 02 - 05 Nov 2004 Zurich, Switzerland. Scientific.Net. https://doi.org/10.4028/www.scientific.net/MSF.475-479.3141

Formation and mechanical properties of Mg65Cu25Er10 and Mg65Cu15Ag10Er10 bulk amorphous alloys

Liu, Weili, Zhang, H. F., Hu, Z. Q. and Wang, Hao. 2005. "Formation and mechanical properties of Mg65Cu25Er10 and Mg65Cu15Ag10Er10 bulk amorphous alloys." Journal of Alloys and Compounds. 397 (1-2), pp. 202-206. https://doi.org/10.1016/j.jallcom.2005.01.043

Synthesis and mechanical properties of Cu-based bulk metallic glass composites containing in-situ TiC particles

Fu, H. M., Zhang, H. F., Wang, Hao, Zhang, Qingsheng and Hu, Z. Q.. 2005. "Synthesis and mechanical properties of Cu-based bulk metallic glass composites containing in-situ TiC particles." Scripta Materialia. 52 (7), pp. 669-673. https://doi.org/10.1016/j.scriptamat.2004.10.031

Preface to futures in mechanics of structures and materials conference. ACMSM20

Aravinthan, Thiru, Karunasena, Warna (Karu) and Wang, Hao. 2009. "Preface to futures in mechanics of structures and materials conference. ACMSM20." Aravinthan, Thiru, Karunasena, Warna (Karu) and Wang, Hao (ed.) 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM20). Toowoomba, Australia 02 - 05 Dec 2008 London, United Kingdom.

Accelerated full scale fatigue testing of a small composite wind turbine blade using a mechanically operated test rig

Epaarachchi, Jayantha A. and Clausen, Philip D.. 2004. "Accelerated full scale fatigue testing of a small composite wind turbine blade using a mechanically operated test rig." Atrens, Andrej, Boland, J. N., Clegg, Richard and Griffiths, John (ed.) 2004 Structural Integrity and Fracture International Conference (SIF2004). Brisbane, Australia 26 - 29 Sep 2004 Australia.

Investigation of embedded near infrared fibre Bragg grating (FBG) sensors (830 nm) in structural health monitoring of glass fibre composite structures

Epaarachchi, Jayantha A., Canning, John and Stevenson, Michael. 2008. "Investigation of embedded near infrared fibre Bragg grating (FBG) sensors (830 nm) in structural health monitoring of glass fibre composite structures ." Sampson, David D. (ed.) 19th International Conference on Optical Fibre Sensors (OFS-19). Perth, Australia 15 - 18 Apr 2008 Bellingham, WA. United States. SPIE. https://doi.org/10.1117/12.786896

Dynamic behavior of hybrid composite bridge girder

Epaarachchi, J. A., Karunasena, W. and Aravinthan, T.. 2008. "Dynamic behavior of hybrid composite bridge girder." Aravinthan, Thiru, Karunasena, Warna (Karu) and Wang, Hao (ed.) 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM20). Toowoomba, Australia 02 - 05 Dec 2008 London, United Kingdom.

Manufacture of syntactic foams using starch as binder: post-mold processing

Islam, Md Mainul and Kim, Ho Sung. 2008. "Manufacture of syntactic foams using starch as binder: post-mold processing." Materials and Manufacturing Processes. 23 (8), pp. 884-892. https://doi.org/10.1080/10426910802413661

Syntactic foams consolidated with starch: mixing behaviour for post-mould processing

Islam, Md Mainul and Kim, Ho Sung. 2006. "Syntactic foams consolidated with starch: mixing behaviour for post-mould processing." 4th International Conference on Advanced Materials & Processing (ICAMP-4). Hamilton, New Zealand 10 - 13 Dec 2006 Hamilton, New Zealand.

Syntactic foams consolidated with starch: modelling for pre-mould processing

Islam, Md Mainul and Kim, Ho Sung. 2006. "Syntactic foams consolidated with starch: modelling for pre-mould processing." 4th International Conference on Advanced Materials & Processing (ICAMP-4). Hamilton, New Zealand 10 - 13 Dec 2006 Hamilton, New Zealand.

Novel syntactic foams made of ceramic hollow micro-spheres and starch - theory, structure and properties

Islam, Md Mainul and Kim, Ho Sung. 2006. "Novel syntactic foams made of ceramic hollow micro-spheres and starch - theory, structure and properties." Bandyopadhyay, Sri, Zeng, Q., Berndt, Christopher C., Rizkalla, S., Gowripalan, N. and Matison, Janison (ed.) ACUN-5 International Composites Conference. Sydney, Australia 11 - 14 Jul 2006 Sydney, Australia.

Syntactic foams consolidated with starch: mixing behaviour for post-mould processing

Islam, Md Mainul and Kim, Ho Sung. 2007. "Syntactic foams consolidated with starch: mixing behaviour for post-mould processing." Advanced Materials Research. 29-30, pp. 169-172.

Syntactic foams consolidated with starch: modelling for pre-mould processing

Islam, Md Mainul and Kim, Ho Sung. 2007. "Syntactic foams consolidated with starch: modelling for pre-mould processing." Advanced Materials Research. 29-30, pp. 165-168.

Novel syntactic foams made of ceramic hollow micro-spheres and starch: theory, structure and properties

Islam, Md Mainul and Kim, Ho Sung. 2007. "Novel syntactic foams made of ceramic hollow micro-spheres and starch: theory, structure and properties." Journal of Materials Science. 42 (15), pp. 6123-6132. https://doi.org/10.1007/s10853-006-1091-7

Manufacture of syntactic foams: pre-mold processing

Islam, Md Mainul and Kim, Ho Sung. 2007. "Manufacture of syntactic foams: pre-mold processing." Materials and Manufacturing Processes. 22 (1), pp. 28-36. https://doi.org/10.1080/10426910601015857

Pre-mould processing for syntactic foams: modelling, theory and experiment

Islam, Md Mainul and Kim, Ho Sung. 2008. "Pre-mould processing for syntactic foams: modelling, theory and experiment." 13th International Conference on Applied Mechanics and Mechanical Engineering (AMME-13). Cairo, Egypt 27 - 29 May 2008 Cairo, Egypt.

Magnesium thixotropic structure produced by controlled nucleation method

Wang, Hao and Ning, Zhiliang. 2007. "Magnesium thixotropic structure produced by controlled nucleation method ." Tezhong Zhuzao Ji Youse Hejin (Special Casting and Nonferrous Alloys).

In-situ Si/Al composite produced by semisolid metal processing

Wang, Hao. 2007. "In-situ Si/Al composite produced by semisolid metal processing." Materials and Manufacturing Processes. 22 (5-6), pp. 696-699. https://doi.org/10.1080/10426910701384963

The effect of pre-processing and grain structure on the bio-corrosion and fatigue resistance of magnesium alloy AZ31

Wang, H., Estrin, Y., Fu, H. M., Song, G. L. and Zuberova, Z.. 2007. "The effect of pre-processing and grain structure on the bio-corrosion and fatigue resistance of magnesium alloy AZ31." Advanced Engineering Materials. 9 (11), pp. 967-972. https://doi.org/10.1002/adem.200700200

Effects of carbon nanotubes and metal catalysts on hydrogen storage in magnesium nanocomposite

Yao, X. D., Wu, C. Z., Wang, Hao, Cheng, H. M. and Lu, G. Q.. 2006. "Effects of carbon nanotubes and metal catalysts on hydrogen storage in magnesium nanocomposite." Journal of Nanoscience and Nanotechnology. 6 (2), pp. 494-498.

In situ TiB-reinforced cu-based bulk metallic glass composites

Fu, H. M., Wang, Hao, Zhang, H. F. and Hu, Z. Q.. 2006. "In situ TiB-reinforced cu-based bulk metallic glass composites." Scripta Materialia. 54 (11), pp. 1961-1966. https://doi.org/10.1016/j.scriptamat.2006.01.048

In-situ Cu-based bulk metallic glass composite

Wang, Hao, Fu, H. M., Zhang, H. F. and Hu, Z. Q.. 2006. "In-situ Cu-based bulk metallic glass composite." International Journal of Modern Physics B. 20 (25-27), pp. 3963-3968. https://doi.org/10.1142/S0217979206040696

The effect of Gd addition on the glass-forming ability of Cu-Zr-Al alloy

Fu, H. M., Wang, Hao, Zhang, H. F. and Hu, Z. Q.. 2006. "The effect of Gd addition on the glass-forming ability of Cu-Zr-Al alloy." Scripta Materialia. 55 (2), pp. 147-150. https://doi.org/10.1016/j.scriptamat.2006.03.052

Modeling of semisolid structure formation in controlled nucleation method

Yao, X. and Wang, H.. 2006. "Modeling of semisolid structure formation in controlled nucleation method ." International Journal of Modern Physics B. 20 (25-27), pp. 4123-4128. https://doi.org/10.1142/S0217979206040969

In-situ Si/Al composite produced by semisolid metal processing

Wang, Hao. 2006. "In-situ Si/Al composite produced by semisolid metal processing ." Bandyopadhyay, Sri, Zeng, Q., Berndt, Christopher C., Rizkalla, S., Gowripalan, N. and Matison, Janison (ed.) ACUN-5 International Composites Conference. Sydney, Australia 11 - 14 Jul 2006 Sydney, Australia.

Tungsten fibre reinforced Zr-based bulk metallic glass composites

Wang, Hao, Zhang, H. F. and Hu, Z. Q.. 2006. "Tungsten fibre reinforced Zr-based bulk metallic glass composites ." Bandyopadhyay, Sri, Zeng, Q., Berndt, Christopher C., Rizkalla, S., Gowripalan, N. and Matison, Janison (ed.) ACUN-5 International Composites Conference. Sydney, Australia 11 - 14 Jul 2006 Sydney, Australia.

Tungsten fibre reinforced Zr-based bulk metallic glass composites

Wang, Hao, Zhang, H. F. and Hu, Z. Q.. 2007. "Tungsten fibre reinforced Zr-based bulk metallic glass composites." Materials and Manufacturing Processes. 22 (5-6), pp. 687-691. https://doi.org/10.1080/10426910701384922

The developments of structural health/integrity monitoring systems using FBG sensors at CEEFC of USQ

Kahandawa, Gayan C., Epaarachchi, Jayantha A., Wang, Hao and Aravinthan, Thiru. 2010. "The developments of structural health/integrity monitoring systems using FBG sensors at CEEFC of USQ." Goh, Steven C. and Wang, Hao (ed.) 2010 Southern Region Engineering Conference (SREC 2010). Toowoomba, Australia 11 - 12 Nov 2010 Toowoomba, Australia.

Sustainable materials research at USQ

Wang, Hao. 2010. "Sustainable materials research at USQ." Goh, Steven C. and Wang, Hao (ed.) 2010 Southern Region Engineering Conference (SREC 2010). Toowoomba, Australia 11 - 12 Nov 2010 Toowoomba, Australia .

Influence of casting temperature on microstructures and mechanical properties of Cu50Zr45.5Ti2.5Y2 metallic glass prepared using copper mold casting [+ Erratum]

Zhu, Zhengwang, Zhang, Haifeng, Wang, Hao, Ding, Bingzhe, Hu, Zhuang-Qi and Huang, Han. 2009. "Influence of casting temperature on microstructures and mechanical properties of Cu50Zr45.5Ti2.5Y2 metallic glass prepared using copper mold casting [+ Erratum]." Journal of Materials Research. 24 (10), pp. 3108-3115. https://doi.org/10.1557/jmr.2009.0373

The effect of viscoelasticity on fatigue behaviour of polymer matrix composites

Epaarachchi, J. A.. 2011. "The effect of viscoelasticity on fatigue behaviour of polymer matrix composites ." Guedes, Rui Miranda (ed.) Creep and fatigue in polymer matrix composites. Cambridge, United Kingdom. Woodhead Publishing Limited. pp. 492-513

Assessment of damage accumulation in glass fibre reinforced plastic (GFRP) composites under spectrum fatigue loading

Epaarachchi, Jayantha A.. 2006. "Assessment of damage accumulation in glass fibre reinforced plastic (GFRP) composites under spectrum fatigue loading." Hoffman, Mark and Price, John (ed.) 2006 International Conference on Structural Integrity and Failure (SIF2006). Sydney, Australia 27 - 29 Sep 2006 Australia.

Temperature effects on full scale FRP bridge using innovative composite components

Sirimanna, C. S., Islam, M. M. and Aravinthan, T.. 2011. "Temperature effects on full scale FRP bridge using innovative composite components." Ye, Lieping, Feng, Peng and Yue, Qingrui (ed.) 5th International Conference on FRP Composites in Civil Engineering (CICE 2010). Beijing, China 27 - 29 Sep 2010 Beijing, China.

Change of dynamic response of pultruded composite components used in advanced composite structures due to fatigue and fracture

Epaarachchi, J. A.. 2008. "Change of dynamic response of pultruded composite components used in advanced composite structures due to fatigue and fracture ." Aravinthan, Thiru, Karunasena, Warna and Wang, Hao (ed.) 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM20). Toowoomba, Australia 02 - 05 Dec 2008 London, United Kingdom.

Sensors, actuators, and intelligent processing [Preface]

Lau, Kin-Tak, Epaarachchi, Jayantha and Sudarshan, T. S.. 2010. "Sensors, actuators, and intelligent processing [Preface]." Materials and Manufacturing Processes. 25 (4), pp. 211-211. https://doi.org/10.1080/10426910903425036

Deformation behavior of semisolid A356 alloy prepared by low temperature pouring

Ning, Z. L., Wang, H. and Sun, J. F.. 2010. "Deformation behavior of semisolid A356 alloy prepared by low temperature pouring." Materials and Manufacturing Processes. 25 (7), pp. 648-653. https://doi.org/10.1080/10426910903447279

Effects of Nd on microstructures and properties at the elevated temperature of a Mg-0.3Zn-0.32Zr alloy

Ning, Z. L., Wang, H., Liu, H. H., Cao, F. Y., Wang, S. T. and Sun, J. F.. 2010. "Effects of Nd on microstructures and properties at the elevated temperature of a Mg-0.3Zn-0.32Zr alloy." Materials and Design. 31 (9), pp. 4438-4444. https://doi.org/10.1016/j.matdes.2010.04.021

The role of casting temperature in preparation of bulk metallic glasses

Wang, Hao. 2010. "The role of casting temperature in preparation of bulk metallic glasses ." Chandra, T., Wanderka, N., Reimers, W. and Ionescu, M. (ed.) 6th International Conference on Processing and Manufacturing of Advanced Materials (THERMEC 2009): Processing, Fabrication, Properties, Applications. Berlin, Germany 25 - 29 Aug 2009 Switzerland. https://doi.org/10.4028/www.scientific.net/MSF.638-642.1671

Characteristics of a silk fibre reinforced biodegradable plastic

Ho, Mei-Po, Lau, Kin-Tak, Wang, Hao and Bhattacharyya, Debes. 2011. "Characteristics of a silk fibre reinforced biodegradable plastic." Composites Part B: Engineering. 42 (2), pp. 117-122. https://doi.org/10.1016/j.compositesb.2010.10.007

Effects of natural fibre surface on composite properties: a review

Kabir, M. M., Wang, H., Aravinthan, T., Cardona, F. and Lau, K. -T.. 2011. "Effects of natural fibre surface on composite properties: a review." Cowled, Craig J. L. (ed.) 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing (eddBE 2011). Brisbane, Australia 27 - 29 Apr 2011 Brisbane, Australia.

Behaviour of structural fibre composite sandwich panels under point load and uniformly distributed load

Islam, Md Mainul and Aravinthan, Thiru. 2010. "Behaviour of structural fibre composite sandwich panels under point load and uniformly distributed load." Composite Structures. 93 (1), pp. 206-215. https://doi.org/10.1016/j.compstruct.2010.05.019

Polymer based filler materials as infill for GFRP pile connector

Sirimanna, Chamila Sampath, Islam, Md Mainul and Aravinthan, Thiru. 2011. "Polymer based filler materials as infill for GFRP pile connector." Key Engineering Materials. 471-472, pp. 763-768. https://doi.org/10.4028/www.scientific.net/KEM.471-472.763

Fabrication and characterization of unidirectional silk fibre composites

Ahmed, Mansur, Islam, Md Saiful, Ahsan, Qumrul and Islam, Md Mainul. 2011. "Fabrication and characterization of unidirectional silk fibre composites." Key Engineering Materials. 471-472 (1), pp. 20-25. https://doi.org/10.4028/www.scientific.net/KEM.471-472.20

A review on the tensile properties of natural fiber reinforced polymer composites

Ku, H., Wang, H., Pattarachaiyakoop, N. and Trada, M.. 2011. "A review on the tensile properties of natural fiber reinforced polymer composites ." Composites Part B: Engineering. 42 (4), pp. 856-873. https://doi.org/10.1016/j.compositesb.2011.01.010

Cellular automaton modeling of semisolid microstructure formation

Li, Qiang, Yu, Baoyi, Zhang, Huawen, Li, Runxia, Wang, Feng, Xie, Shuisheng, Huang, Guojie and Wang, Hao. 2010. "Cellular automaton modeling of semisolid microstructure formation." China Foundry. 7 (2), pp. 143-148.

Flexural behaviour of structural fibre composite sandwich beams in flatwise and edgewise positions

Manalo, A. C., Aravinthan, T., Karunasena, W. and Islam, M. M.. 2010. "Flexural behaviour of structural fibre composite sandwich beams in flatwise and edgewise positions." Composite Structures. 92 (4), pp. 984-995. https://doi.org/10.1016/j.compstruct.2009.09.046

Pre-mould processing technique for syntactic foams: generalised modelling, theory and experiment

Islam, Md Mainul and Kim, Ho Sung. 2011. "Pre-mould processing technique for syntactic foams: generalised modelling, theory and experiment." Journal of Materials Processing Technology. 211 (4), pp. 708-716. https://doi.org/10.1016/j.jmatprotec.2010.12.006

Mechanical and thermal properties of untreated and chemically treated jute fibre reinforced composites

Kabir, Mohammad Mazedul, Islam, Md Mainul and Wang, Hao. 2010. "Mechanical and thermal properties of untreated and chemically treated jute fibre reinforced composites." 1st International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE 2010) . Khulna, Bangladesh 23 - 24 Dec 2010 Khulna, Bangladesh.

An overview on syntactic foam core and paper skin sandwich composites as potential building materials

Islam, Md Mainul, Kim, Ho Sung and Kabir, Mohammad Mazedul. 2010. "An overview on syntactic foam core and paper skin sandwich composites as potential building materials." 2010 International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE2010). Khulna, Bangladesh 23 - 24 Dec 2010 Khulna, Bangladesh.

Response Fibre Bragg Grating (FBG) strain sensors embedded at different locations through the thickness around a delamination in a composite lamina

Epaarachchi, Jayantha A., Rathnaweera, Gayan, Canning, John and Stevenson, Michael. 2010. "Response Fibre Bragg Grating (FBG) strain sensors embedded at different locations through the thickness around a delamination in a composite lamina." 7th Asian-Australasian Conference on Composites (ACCM7). Taipei, Taiwan 15 - 18 Nov 2010 Taipei, Taiwan.

Performance of aluminium/vinylester particulate composite

Epaarachchi, Jayantha A. and Reushle, Matthew T.. 2010. "Performance of aluminium/vinylester particulate composite." Nie, Jian-Feng and Morton, Allan (ed.) PRICM7: 7th Pacific Rim International Conference on Advanced Materials and Processing. Cairns, Australia 02 - 06 Aug 2010 Zurich, Switzerland. https://doi.org/10.4028/www.scientific.net/MSF.654-656.2656

Effects of temperature on a pultruded FRP composite

Sirimanna, Chamila S., Islam, Md Mainul and Aravinthan, Thiru. 2010. "Effects of temperature on a pultruded FRP composite." Teh, Kian, Davies, Ian and Howard, Ian (ed.) 6th Australasian Congress on Applied Mechanics (ACAM 6). Perth, Western Australia 12 - 15 Dec 2010 Perth, Australia.

An investigation of spectral response of embedded Fibre Bragg Grating (FBG) sensors in a hollow composite cylindrical beam under pure torsion and combined loading

Kahandawa, Gayan C., Epaarachchi, Jayantha A., Wang, Hao, Followell, David, Birt, Peter, Canning, John and Stevenson, Michael. 2010. "An investigation of spectral response of embedded Fibre Bragg Grating (FBG) sensors in a hollow composite cylindrical beam under pure torsion and combined loading." Teh, Kian, Davies, Ian and Howard, Ian (ed.) 6th Australasian Congress on Applied Mechanics (ACAM 6). Perth, Western Australia 12 - 15 Dec 2010 Perth, Australia.

Effects of the self distortions of embedded FBG sensors on spectral response due to torsional and combined loads

Kahandawa, Gayan C., Epaarachchi, Jayantha A., Wang, Hao and Canning, John. 2010. "Effects of the self distortions of embedded FBG sensors on spectral response due to torsional and combined loads." 3rd Asia-Pacific Workshop on Structural Health Monitoring (APWSHM 2010). Tokyo, Japan 30 Nov - 02 Dec 2010 Tokyo, Japan.

Natural fibre composites with epoxidized vegetable oil (EVO) resins: a review

Manthey, N. W., Cardona, F., Aravinthan, T., Wang, H. and Cooney, T.. 2010. "Natural fibre composites with epoxidized vegetable oil (EVO) resins: a review." Goh, Steven C. and Wang, Hao (ed.) 2010 Southern Region Engineering Conference (SREC 2010). Toowoomba, Australia 11 - 12 Nov 2010 Toowoomba, Australia.

An overview on the application of FRP composites in piling system

Guades, E. J., Aravinthan, T. and Islam, M. M.. 2010. "An overview on the application of FRP composites in piling system." Goh, Steven C. and Wang, Hao (ed.) 2010 Southern Region Engineering Conference (SREC 2010). Toowoomba, Australia 11 - 12 Nov 2010 Canberra, Australia.

The response of embedded NIR (830 nm) fiber Bragg grating sensors in glass fiber composites under fatigue loading

Epaarachchi, Jayantha A., Canning, John and Stevenson, Michael. 2010. "The response of embedded NIR (830 nm) fiber Bragg grating sensors in glass fiber composites under fatigue loading." Journal of Composite Materials. 44 (7), pp. 809-819. https://doi.org/10.1177/0021998309346382

Physical and tensile properties of raw and treated silk fibres

Ahmed, Mansur, Islam, Md Saiful, Ahsan, Qumrul and Islam, Md Mainul. 2010. "Physical and tensile properties of raw and treated silk fibres." 2nd International Conference on Natural Polymers, Bio-Polymers, Bio-Materials, their Composites, Blends, IPN's and Gels Polyelectrolytes and Gels: Macro to Nano Scales (ICNP - 2010). Kottayam, India 24 - 26 Sep 2010 India.

Manufacturing and behaviour of sandwich composites made of starch as binder for core and adhesive between core and skins

Islam, Md Mainul and Kim, Ho Sung. 2010. "Manufacturing and behaviour of sandwich composites made of starch as binder for core and adhesive between core and skins." 2nd International Conference on Natural Polymers, Bio-Polymers, Bio-Materials, their Composites, Blends, IPN's and Gels Polyelectrolytes and Gels: Macro to Nano Scales (ICNP - 2010). Kottayam, India 24 - 26 Sep 2010 India.

Magnesium and magnesium alloys as degradable metallic biomaterials

Wang, H., Shi, Z. M. and Yang, K.. 2008. "Magnesium and magnesium alloys as degradable metallic biomaterials." Bell, John, Yan, Cheng, Ye, Lin and Zhang, Liangchi (ed.) International Conference on Frontiers in Materials Science and Technology (FMST 2008). Brisbane, Australia 26 - 28 Mar 2008 Zurich, Switzerland. https://doi.org/10.4028/www.scientific.net/AMR.32.207

Investigation for a suitable screw of a briquetting machine

Ali, Md Nawsher, Islam, Md Mainul and Ferdous, Chy. Md Refaul. 2004. "Investigation for a suitable screw of a briquetting machine." Hossain, M. Imtiaz (ed.) 2nd BSME-ASME lnternational Conference on Thermal Engineering. Dhaka, Bangladesh 02 - 04 Jan 2004 Dhaka, Bangladesh.

An overview of energy profile for Bangladesh: past, present and future uses

Khan, Kamrujjaman, Islam, Md Mainul, Rahman, M. L. and Ali, Md Nawsher. 2003. "An overview of energy profile for Bangladesh: past, present and future uses." 2003 National Seminar on the Role of Renewable and Alternative Energy Sources for National Development (SRRAESND-2003). Khulna, Bangladesh 19 - 20 Dec 2003 Pathumthani, Thailand.

An investigation on the raw materials and products of the briquetting machine

Islam, Md Mainul, Khan, Kamrujjaman, Ali, Md Nawsher and Islam, Md Shahidul. 2003. "An investigation on the raw materials and products of the briquetting machine." 2003 National Seminar on the Role of Renewable and Alternative Energy Sources for National Development (SRRAESND-2003). Khulna, Bangladesh 19 - 20 Dec 2003 Pathumthani, Thailand.

Syntactic foams as building materials consisting of inorganic hollow microspheres and starch binder

Kim, Ho Sung and Islam, Md Mainul. 2009. "Syntactic foams as building materials consisting of inorganic hollow microspheres and starch binder." Cornejo, Donald N. and Haro, Jason L. (ed.) Building materials: properties, performance and applications. New York, USA. Nova Science Publishers.

Dynamic behaviour of laterally loaded pultruted composite beams

Epaarachchi, Jayantha A. and Birt, Peter. 2009. "Dynamic behaviour of laterally loaded pultruted composite beams." Dyckmans, Gunther (ed.) 9th International Conference of the Mechanical and Physical Behaviour of Materials Under Dynamic Loading (DYMAT 2009). Brussels, Belgium 07 - 11 Sep 2009 France.

Behaviour of innovative fibre composite sandwich panels

Islam, Md Mainul. 2009. "Behaviour of innovative fibre composite sandwich panels." Workshop on Life Cycle Assessment of Sustainable FRP Materials (2009). Saitama, Japan 14 Dec 2009

Behaviour of innovative fibre composite sandwich panels under point loading

Islam, M. M., Aravinthan, T. and Van Erp, G.. 2009. "Behaviour of innovative fibre composite sandwich panels under point loading." Sim, Jongsung (ed.) 2nd Asia-Pacific Conference on FRP in Structures (APFIS 2009). Seoul, Korea 09 - 11 Dec 2009 Seoul, Korea.

Solar photovoltaic technology and Bangladesh

Ferdous, C. M. R., Islam, M. Shahidul, Islam, M. Mainul, Alam, M. M. Asraful and Rahman, A. N. M.Mizanur. 2003. "Solar photovoltaic technology and Bangladesh." 2003 National Seminar on the Role of Renewable and Alternative Energy Sources for National Development (SRRAESND-2003). Khulna, Bangladesh 19 - 20 Dec 2003 Pathumthani, Thailand.

Evaluation of the properties of raw materials and products of briquetting machine

Islam, Md Mainul, Ali, Md Nawsher and Mia, Sobahan. 2004. "Evaluation of the properties of raw materials and products of briquetting machine." Hossain, M. Imtiaz (ed.) 2nd BSME-ASME International Conference on Thermal Engineering. Dhaka, Bangladesh 02 - 04 Jan 2004 Dhaka, Bangladesh.

Effects of static fatigue on the tension-tension fatigue life of glass / polyester composites

Epaarachchi, Jayantha A.. 2005. "Effects of static fatigue on the tension-tension fatigue life of glass / polyester composites." Xie, Mike, Mouritz, Adrian, Khatibi, Akbar Afaghi, Gardiner, Craig and Chiu, Wing Kong (ed.) 4th Australasian Congress on Applied Mechanics (ACAM 2005). Melbourne, Australia 16 - 18 Feb 2005 North Melbourne, Vic, Australia.

Study of bio-corrosion of pure magnesium

Ren, Yibin, Huang, Jingjing, Yang, Ke, Zhang, Bingchun, Yao, Zhiming and Wang, Hao. 2005. "Study of bio-corrosion of pure magnesium." Jinshu Xuebao. 41 (11), pp. 1228-1232.

Present status and future trends in production of semisolid materials

Wang, Hao. 2003. "Present status and future trends in production of semisolid materials." Tezhong Zhuzao Ji Youse Hejin (Special Casting and Nonferrous Alloys). 131, pp. 332-334.

Hydrogen storage of magnesium-based nanocomposites system

Yao, X., Wu, C. Z., Wang, H., Cheng, H. M. and Lu, G. Q. Max. 2005. "Hydrogen storage of magnesium-based nanocomposites system." Journal of Materials Science and Technology. 21 (1 (Supplement)), pp. 57-60.

Crack opening behavior in aluminum alloy 5083

Islam, Md Mainul and Watanabe, Taiji. 2003. "Crack opening behavior in aluminum alloy 5083." Journal of Mechanical Engineering, Institution of Engineers, Bangladesh. ME 32, pp. 26-35.

Microstructure of MmM5/Mg multi-layer hydrogen storage films prepared by magnetron sputtering

Ouyang, L. Z., Wang, Hao, Zhu, M., Zou, Jin and Chung, C. Y.. 2004. "Microstructure of MmM5/Mg multi-layer hydrogen storage films prepared by magnetron sputtering." Microscopy Research and Technique. 64 (4), pp. 323-329. https://doi.org/10.1002/jemt.20089

Crystallization behavior of (Cu60Zr30Ti10)99Sn1 bulk metallic glass

Wang, Hao, Song, Xiaoping, Yao, Xiangdong, Zhang, Haifeng and Hu, Zhuangqui. 2005. "Crystallization behavior of (Cu60Zr30Ti10)99Sn1 bulk metallic glass." Journal of Materials Science and Technology. 21 (1 (Supplement)), pp. 51-53.

A simplified empirical model for prediction of mechanical properties of random short fiber/vinylester composites

Epaarachchi, J., Ku, H. and Gohel, K.. 2010. "A simplified empirical model for prediction of mechanical properties of random short fiber/vinylester composites." Journal of Composite Materials. 44 (6), pp. 779-788. https://doi.org/10.1177/0021998309346383

Flexural behaviour of composite sandwiches for structural applications

Manalo, Allan, Aravinthan, Thiru, Karunasena, Warna and Islam, Mainul. 2009. "Flexural behaviour of composite sandwiches for structural applications." Oehlers, D. J., Griffith, M. C. and Seracino, R. (ed.) 9th International Symposium on Fibre Reinforced Polymers for Reinforced Concrete Structures (FRPRCS-9): Current Challenges and Future Trends. Sydney, Australia 13 - 15 Jul 2009 Adelaide, Australia.

Use of wireless tablet PCs as an effective learning and teaching enhancement tool

Xiang, Wei, Goh, Steven, Pather, Selvan, Maxwell, Andrew, Wang, Hao and Ku, Harry. 2009. "Use of wireless tablet PCs as an effective learning and teaching enhancement tool." Foley, Chris (ed.) EDUCAUSE Australasia Conference 2009: Innovate, Collaborate and Sustain. Perth, Australia 03 - 06 May 2009 Wembley, Western Australia.

Bid-Winning Potential Optimization for Concession Schemes with Imprecise Investment Parameters

Islam, Md. Mainul and Mohamed, Sherif. 2009. "Bid-Winning Potential Optimization for Concession Schemes with Imprecise Investment Parameters ." Journal of Construction Engineering and Management. 135 (8), pp. 690-700. https://doi.org/10.1061/(ASCE)CO.1943-7862.0000032

Futures in mechanics of structures and materials: proceedings of the 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM20), Toowoomba, Australia, 2-5 December 2008

Aravinthan, Thiru, Karunasena, Warna (Karu) and Wang, Hao. Aravinthan, Thiru, Karunasena, Warna (Karu) and Wang, Hao (ed.) 2009. Futures in mechanics of structures and materials: proceedings of the 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM20), Toowoomba, Australia, 2-5 December 2008. London, United Kingdom. CRC Press.

An overview on manufacturing and properties of syntactic foams made of ceramic hollow microspheres and starch

Islam, M. M. and Kim, H. S.. 2009. "An overview on manufacturing and properties of syntactic foams made of ceramic hollow microspheres and starch ." Aravinthan, Thiru, Karunasena, Warna and Wang, Hao (ed.) 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM20). Toowoomba, Australia 02 - 05 Dec 2008 London, United Kingdom.

Development of bulk metallic glass composites

Wang, Hao and Fu, Huameng. 2007. "Development of bulk metallic glass composites ." Fan, Cang (ed.) The world of bulk metallic glasses and their composites. Kerala, India. Research Signpost. pp. 73-92

Properties and mechanical behaviour of novel sandwich composites made of syntactic foam and paper skin

Islam, Md Mainul and Kim, Ho Sung. 2007. "Properties and mechanical behaviour of novel sandwich composites made of syntactic foam and paper skin." Veidt, Martin, Albermani, Faris, Daniel, Bill, Griffiths, John, Hargreaves, Doug, McAree, Ross, Meehan, Paul and Tan, Andy (ed.) 5th Australasian Congress on Applied Mechanics (ACAM 2007). Brisbane, Australia 10 - 12 Dec 2007 Sydney, Australia.

Semisolid structure formation and semisolid casting

Wang, Hao. 2005. "Semisolid structure formation and semisolid casting." Journal of Materials Science and Technology. 21 (1 (Supplement)), pp. 65-71.

Investigation of dynamic behaviour of a hybrid composite bridge girder

Epaarachchi, Jayantha A., Karunasena, Warna and Aravinthan, Thiru. 2007. "Investigation of dynamic behaviour of a hybrid composite bridge girder." Marshall, Ian (ed.) 14th International Conference on Composite Structures (ICCS 14). Melbourne, Australia 19 - 21 Nov 2007 Melbourne, Australia.

An investigation of the response of embedded near infrared fibre bragg grating (FBG) sensors (830nm) in glass fibre composites under fatigue loading

Epaarachchi, Jayantha A., Canning, John and Stevenson, Michael. 2007. "An investigation of the response of embedded near infrared fibre bragg grating (FBG) sensors (830nm) in glass fibre composites under fatigue loading." Marshall, Ian (ed.) 14th International Conference on Composite Structures (ICCS 14). Melbourne, Australia 19 - 21 Nov 2007 Melbourne, Australia.

Multifarious fracture features of CuZrAlGd(Ag) bulk metallic glasses

Fu, H. M., Zhang, H. F., Wang, Hao and Hu, Z. Q.. 2007. "Multifarious fracture features of CuZrAlGd(Ag) bulk metallic glasses." Advanced Materials Research. 29-30, pp. 47-50.

A practical thermodynamic method to calculate the best glass-forming composition for bulk metallic glasses

Wang, Hao, Fu, H. M., Zhang, H. F. and Hu, Z. Q.. 2007. "A practical thermodynamic method to calculate the best glass-forming composition for bulk metallic glasses." International Journal of Nonlinear Sciences and Numerical Simulation. 8 (2), pp. 171-178.

Effect of cooling conditions on grain size of AZ91 alloy

Ning, Zhiliang, Cao, P., Wang, Hao, Sun, Jianfei and Liu, Diankun. 2007. "Effect of cooling conditions on grain size of AZ91 alloy." Journal of Materials Science and Technology. 23 (5), pp. 645-649.

Effect of pouring temperature on thixotropic microstructure formation of AZ91

Ning, Zhiliang, Wu, Peilian, Wang, Hao, Cao, Fuyang and Sun, Jianfei. 2007. "Effect of pouring temperature on thixotropic microstructure formation of AZ91." Rare Metals. 26 (S1), pp. 180-184.

Bulk metallic glass composites

Wang, Hao. 2005. "Bulk metallic glass composites." Journal of Materials Science and Technology. 21 (1 (Supplement)), pp. 86-90.

Investigation of the use of near infrared FBG (830nm) sensors for monitoring the structural response of 0/90 woven cloth/CSM glass fibre/vynylester composite under static and fatigue loading

Epaarachchi, Jayantha A., Clegg, Richard E. and Canning, John. 2007. "Investigation of the use of near infrared FBG (830nm) sensors for monitoring the structural response of 0/90 woven cloth/CSM glass fibre/vynylester composite under static and fatigue loading." HUMS 2007: 5th DSTO International Conference on Health and Usage Monitoring . Melbourne, Australia 19 - 22 Mar 2007 Australia.

Anomalous grain coarsening behaviour observed in grain-refined aluminium alloy cast using low superheat

Taylor, J. A., Wang, H., StJohn, D. H. and Bainbridge, I. F.. 2001. "Anomalous grain coarsening behaviour observed in grain-refined aluminium alloy cast using low superheat." Anjier, Joseph L. (ed.) 130th TMS Annual MeetingLight Metals 2001. New Orleans, Louisanna 11 - 15 Feb 2001 Warrendale, PA. United States.

An experimental investigation of the properties of cross-ply laminate used for manufacturing of small aircraft components

Epaarachchi, Jayantha A. and Clegg, Richard. 2006. "An experimental investigation of the properties of cross-ply laminate used for manufacturing of small aircraft components." Composite Structures. 75 (1-4), pp. 93-99. https://doi.org/10.1016/j.compstruct.2006.04.080

A study of estimation of damage accumulation of glass fibre reinforce plastic (GFRP) composites under a block loading situation

Epaarachchi, Jayantha A.. 2006. "A study of estimation of damage accumulation of glass fibre reinforce plastic (GFRP) composites under a block loading situation." Composite Structures. 75 (1-4), pp. 88-92. https://doi.org/10.1016/j.compstruct.2006.04.063

The development of a fatigue loading spectrum for small wind turbine blades

Epaarachchi, Jayantha A. and Clausen, Philip D.. 2006. "The development of a fatigue loading spectrum for small wind turbine blades." Journal of Wind Engineering and Industrial Aerodynamics. 94, pp. 207-223. https://doi.org/10.1016/j.jweia.2005.12.007

Effects of static-fatigue (tension) on the tension-tension fatigue life of glass fibre reinforced plastic composites

Epaarachchi, Jayantha A.. 2006. "Effects of static-fatigue (tension) on the tension-tension fatigue life of glass fibre reinforced plastic composites." Composite Structures. 74 (4), pp. 419-425. https://doi.org/10.1016/j.compstruct.2005.04.022

A new cumulative fatigue damage model for glass fibre reinforced plastic composites under step/discrete loading

Epaarachchi, Jayantha A. and Clausen, Philip D.. 2005. "A new cumulative fatigue damage model for glass fibre reinforced plastic composites under step/discrete loading." Composites Part A: Applied Science and Manufacturing. 36 (9), pp. 1236-1245. https://doi.org/10.1016/j.compositesa.2005.01.021

An empirical model for fatigue behavior prediction of glass fibre-reinforced plastic (GFRP) composites for various stress ratios and test frequencies

Epaarachchi, Jayantha A. and Clausen, Philip D.. 2003. "An empirical model for fatigue behavior prediction of glass fibre-reinforced plastic (GFRP) composites for various stress ratios and test frequencies." Composites Part A: Applied Science and Manufacturing. 34 (4), pp. 313-326. https://doi.org/10.1016/S1359-835X(03)00052-6

Semisolid microstructural evolution of AlSi7Mg during partial remelting

Wang, Hao, Davidson, C. J. and StJohn, David H.. 2004. "Semisolid microstructural evolution of AlSi7Mg during partial remelting." Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing. 368 (1-2), pp. 159-167. https://doi.org/10.1016/j.msea.2003.10.305

Woven hemp fabric reinforced vinyl ester composite treated with fire retardant

1672

13

3

0

Export as

Related outputs