Thermal properties of sawdust reinforced vinyl ester composites post-cured in microwaves: a pilot study

Article

Ku, H., Prajapati, M. and Cardona, F.. 2011. "Thermal properties of sawdust reinforced vinyl ester composites post-cured in microwaves: a pilot study ." Composites Part B: Engineering. 42 (4), pp. 898-906. https://doi.org/10.1016/j.compositesb.2011.01.008
Article Title

Thermal properties of sawdust reinforced vinyl ester composites post-cured in microwaves: a pilot study

ERA Journal ID4883
Article CategoryArticle
AuthorsKu, H. (Author), Prajapati, M. (Author) and Cardona, F. (Author)
EditorsHui, David
Journal TitleComposites Part B: Engineering
Journal Citation42 (4), pp. 898-906
Number of Pages9
Year2011
PublisherElsevier
Place of PublicationOxford, United Kingdom
ISSN1359-8368
Digital Object Identifier (DOI)https://doi.org/10.1016/j.compositesb.2011.01.008
Web Address (URL)http://www.sciencedirect.com/science/journal/13598368
Abstract

The mechanical properties of sawdust reinforced vinyl ester resin composites post-cured in microwaves have been measured and evaluated in earlier studies. This basic but critical and important data have caused interests in the relevant industry in Australia. This study is therefore carried out to measure and evaluate the thermal properties of the composites with a view to benefit the civil and construction industry as the materials are used in the industry. The original contributions of this paper are that samples post-cured in microwaves, irrespective of the percentage by weight and particle size of sawdust, have higher glass transition temperatures than their counterparts post-cured in an oven; these imply that the stiffness of the samples post-cured in microwaves are higher than their peers. From previous study, it was discovered that the fracture toughness increased with increasing particulate loading. These properties are vital in civil engineering applications because civil structures need composites with high rigidity and fracture toughness. It is hoped that the discussions and results in this work would not only contribute towards the development of sawdust reinforced vinyl ester composites with better material properties, but also useful for the investigations of thermal and mechanical properties in other composites.

Keywordspolymer-matrix composites (PMCs); thermosetting resin; thermal properties; thermal analysis
ANZSRC Field of Research 2020400505. Construction materials
401602. Composite and hybrid materials
401706. Numerical modelling and mechanical characterisation
Public Notes

File reproduced in accordance with the copyright policy of the publisher/author.

Byline AffiliationsCentre of Excellence in Engineered Fibre Composites
Institution of OriginUniversity of Southern Queensland
Permalink -

https://research.usq.edu.au/item/q0q3w/thermal-properties-of-sawdust-reinforced-vinyl-ester-composites-post-cured-in-microwaves-a-pilot-study

Log in to edit

Download files

Accepted Version
Ku_Prajapati_Cardona_AV.pdf
File access level: Anyone

  • 2164
    total views
  • 1126
    total downloads
  • 0
    views this month
  • 0
    downloads this month

Export as

Related outputs

Preliminary study on the development of syntactic foams for marine applications
Salleh, Z., Islam, M. M. and Ku, H.. 2013. "Preliminary study on the development of syntactic foams for marine applications." Epaarachchi, Jayantha A., Lau, Alan Kin-tak and Leng, Jinsong (ed.) 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013). Gold Coast, Australia 10 - 12 Jul 2013 United States. https://doi.org/10.1117/12.2028279
The process of updating production engineering in an Australian regional university excellence in developing e-learning
Ku, H.. 2011. "The process of updating production engineering in an Australian regional university excellence in developing e-learning ." Ao, S. I., Castillo, O., Douglas, C., Feng, D. D. and Lee, J.-A. (ed.) 2011 International MultiConference of Engineers and Computer Scientists (IMECS 2011) . Kowloon, China 16 - 18 Mar 2011 Hong Kong.
Intervening to improve the dissertation of final year engineering research projects
Goh, Steven and Ku, Harry. 2011. "Intervening to improve the dissertation of final year engineering research projects." Kellogg, Stuart and Karlin, Jennifer (ed.) 41st ASEE/IEEE Frontiers in Education Conference (FIE 2011): Celebrating 41 Years of Monumental Innovations from around the World. Rapid City, United States 12 - 15 Oct 2011 Piscataway, NJ, United States.
Tensile tests of glass powder reinforced epoxy composites: pilot study
Ku, H., Wong, P., Huang, J., Fung, H. and Mohan, T.. 2011. "Tensile tests of glass powder reinforced epoxy composites: pilot study ." Zhu, Zeng (ed.) ICKEM 2011: 1st International Conference on Key Engineering Materials. Sanya, China 25 - 27 Mar 2011 Stafa-Zurich, Switzerland. https://doi.org/10.4028/www.scientific.net/AMR.214.1
Experimental investigation on the interfacial adhesion of date palm fibres with epoxy matrix
Alsaeed, T., Alajmi, A., Yousif, B. F., Ku, H. and Lau, Alan Kin-tak. 2012. "Experimental investigation on the interfacial adhesion of date palm fibres with epoxy matrix." Heslehurst, Rikard Benton and Byrne, Ann (ed.) Composites Australia and the CRC for Advanced Composite Structures Conference 2012: Diversity in Composites. Leura, Australia 15 - 16 Mar 2012 Melbourne, Australia.
Injection molded noil hemp fiber composites: interfacial shear strength, fiber strength, and aspect ratio
Etaati, Amir, Pather, Selvan, Cardona, Francisco and Wang, Hao. 2016. "Injection molded noil hemp fiber composites: interfacial shear strength, fiber strength, and aspect ratio." Polymer Composites. 37 (1), pp. 213-220. https://doi.org/10.1002/pc.23172
Processing and characterization of 100% hemp-based biocomposites obtained by vacuum infusion
Francucci, G., Manthey, N. W., Cardona, F. and Aravinthan, T.. 2014. "Processing and characterization of 100% hemp-based biocomposites obtained by vacuum infusion." Journal of Composite Materials. 48 (11), pp. 1323-1335. https://doi.org/10.1177/0021998313485266
Analysis of heat-treated bovine cortical bone by thermal gravimetric and nanoindentation
Lau, Mei-ling, Lau, Kin-tak, Ku, Harry, Cardona, Francisco and Lee, Joong-Hee. 2013. "Analysis of heat-treated bovine cortical bone by thermal gravimetric and nanoindentation ." Composites Part B: Engineering. 55, pp. 447-452. https://doi.org/10.1016/j.compositesb.2013.06.027
Using computer software packages to enhance the teaching in engineering management science part 4 – quality control
Ku, Harry Siu-lung. 2013. "Using computer software packages to enhance the teaching in engineering management science part 4 – quality control ." Ao, S. I., Castillo, O., Douglas, C., Feng, David and Lee, Jeong-A. (ed.) International MultiConference of Engineers and Computer Scientists (IMECS 2013). Kowloon, Hong Kong 13 - 15 Mar 2013 Hong Kong.
Fracture toughness and toughening mechanisms of unsaturated polyester-based clay nanocomposites
Albdiry, Mushtaq T., Yousif, Belal F. and Ku, Harry. 2013. "Fracture toughness and toughening mechanisms of unsaturated polyester-based clay nanocomposites." 13th International Conference on Fracture (ICF 2013). Beijing, China 16 - 21 Jun 2013 Anhui, China.
Thermo-mechanical properties of epoxidized hemp oil-based bioresins and biocomposites
Manthey, Nathan W., Cardona, Francisco, Francucci, Gaston and Aravinthan, Thiru. 2013. "Thermo-mechanical properties of epoxidized hemp oil-based bioresins and biocomposites." Journal of Reinforced Plastics and Composites. 32 (19), pp. 1444-1456. https://doi.org/10.1177/0731684413493030
Properties and behaviour of gomuti fibre composites under tensile and compressive load
Ticoalu, A., Aravinthan, T. and Cardona, F.. 2013. "Properties and behaviour of gomuti fibre composites under tensile and compressive load." Samali, Bijan, Attard, Mario M. and Song, Chongmin (ed.) 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM22). Sydney, Australia 11 - 14 Dec 2012 London, United Kingdom.
Impact fracture behaviour of silane-treated halloysite nanotubes-reinforced unsaturated polyester
Albdiry, M. T., Ku, H. and Yousif, B. F.. 2013. "Impact fracture behaviour of silane-treated halloysite nanotubes-reinforced unsaturated polyester." Engineering Failure Analysis. 35, pp. 718-725. https://doi.org/10.1016/j.engfailanal.2013.06.027
Tensile properties of nanoclay reinforced epoxy composites
Ku, H. and Trada, Mohan. 2013. "Tensile properties of nanoclay reinforced epoxy composites." Epaarachchi, Jayantha A. , Lau, Alan Kin-tak and Leng, Jinsong (ed.) 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013). Gold Coast, Australia 10 - 12 Jul 2013 Bellingham, WA. United States. https://doi.org/10.1117/12.2026644
A study into the characteristics of gomuti (Arenga pinnata) fibre for usage as natural fibre composites
Ticoalu, Adriana, Aravinthan, Thiru and Cardona, Francisco. 2014. "A study into the characteristics of gomuti (Arenga pinnata) fibre for usage as natural fibre composites." Journal of Reinforced Plastics and Composites. 33 (2), pp. 179-192. https://doi.org/10.1177/0731684413503191
Study on compressive properties of syntactic foams for marine applications
Salleh, Z., Islam, M. M. and Ku, H.. 2014. "Study on compressive properties of syntactic foams for marine applications." Journal of Multifunctional Composites. 2 (1), pp. 21-27. https://doi.org/10.12783/issn.2168-4286/2.1/Salleh
Surface coating of poly-D-L-lactide/nano-hydroxyapatite composite scaffolds for dexamethasone-releasing function and wettability enhancement
Chen, Ling, Tang, Chak Yin, Ku, Harry Siu Lung, Chen, Da Zhu and Tsui, Chi Pong. 2013. "Surface coating of poly-D-L-lactide/nano-hydroxyapatite composite scaffolds for dexamethasone-releasing function and wettability enhancement." Bose, Susmita, Narayan, Roger and Bandyopadhyay , Amit (ed.) Materials Science and Technology Conference (MS&T 2012): Next Generation Biomaterials and Surface Properties of Biomaterials . Pittsburgh, United States 27 - 31 Oct 2012 Hoboken, NJ. United States. https://doi.org/10.1002/9781118751015
Microwave sintering and characterization of polypropylene/multi-walled carbon nanotube/hydroxyapatite composites
Chen, Ling, Tang, Chak Yin, Ku, Harry Siu-Lung, Tsui, Chi Pong and Chen, Xu. 2014. "Microwave sintering and characterization of polypropylene/multi-walled carbon nanotube/hydroxyapatite composites ." Composites Part B: Engineering. 56, pp. 504-511. https://doi.org/10.1016/j.compositesb.2013.08.005
Wireless tablet PCs for enhanced teaching at an Australian regional university teaching both campus and distance modes
Goh, Steven Chingnam, Galligan, Linda Ann and Ku, Harry. 2013. "Wireless tablet PCs for enhanced teaching at an Australian regional university teaching both campus and distance modes." 120th American Society for Engineering Education Annual Conference and Exposition (ASEE 2013): Engineering Education: Frankly, We Do Give a D*mn. Atlanta, GA. United States 23 - 26 Jun 2013 Washington, DC. United States.
Tensile behaviours of activated carbon coconut shell filled epoxy composites
Salleh, Z., Islam, M. M. and Ku, H.. 2013. "Tensile behaviours of activated carbon coconut shell filled epoxy composites." Noor, M. M., Rahman, M. M. and Ismail, J. (ed.) 3rd Malaysian Postgraduate Conference (MPC 2013). Sydney, Australia 04 - 05 Jul 2013 Sydney, Australia.
Effects of chemical treatments on hemp fibre structure
Kabir, M. M., Wang, H., Lau, K. T. and Cardona, F.. 2013. "Effects of chemical treatments on hemp fibre structure." Applied Surface Science. 276, pp. 13-23. https://doi.org/10.1016/j.apsusc.2013.02.086
Tensile properties of chemically treated hemp fibres as reinforcement for composites
Kabir, M. M., Wang, H., Lau, K. T. and Cardona, F.. 2013. "Tensile properties of chemically treated hemp fibres as reinforcement for composites." Composites Part B: Engineering. 53, pp. 362-368. https://doi.org/10.1016/j.compositesb.2013.05.048
Processing of materials using electromagnetic fields
Ku, Harry S.. 2012. "Processing of materials using electromagnetic fields." Nicolais, Luigi and Borzacchiello, Assunta (ed.) Wiley encyclopedia of composites, 2nd ed.. Hoboken, NJ. United States. John Wiley & Sons. pp. 2487-2500
The potential of using date palm fibres as reinforcement for polymeric composites
Alsaeed, T., Yousif, B. F. and Ku, H.. 2013. "The potential of using date palm fibres as reinforcement for polymeric composites." Materials and Design. 43, pp. 177-184. https://doi.org/10.1016/j.matdes.2012.06.061
Strengthening of corroded steel angles using CFRP
Tawfik, Qaidar H., Karunasena, Warna (Karu) and Cardona, Francisco. 2012. "Strengthening of corroded steel angles using CFRP." Heslehurst, Rickard and Byrne, Ann (ed.) Composites Australia and the CRC for Advanced Composite Structures Conference 2012: Diversity in Composites. Leura, Australia 15 - 16 Mar 2012 Melbourne, Australia.
Modelling of tensile properties glass powder/epoxy composites post-cured in an oven and in microwaves
Ku, H., Epaarachchi, J., Trada, M. and Wong, P.. 2013. "Modelling of tensile properties glass powder/epoxy composites post-cured in an oven and in microwaves ." Journal of Reinforced Plastics and Composites. 32 (10), pp. 689-699. https://doi.org/10.1177/0731684412475333
Dielectric properties of sawdust reinforced epoxy composites post-cured in microwaves
Ku, H., Trada, M. and Tai, P.. 2013. "Dielectric properties of sawdust reinforced epoxy composites post-cured in microwaves ." Journal of Reinforced Plastics and Composites. 32 (10), pp. 765-774. https://doi.org/10.1177/0731684412475250
Tensile properties of bagasse reinforced epoxy composites
Trada, M., Mandava, J., Ku, H. and Yousif, B.. 2012. "Tensile properties of bagasse reinforced epoxy composites." Jaafar, M., Azura, A. R., Leong, K. H. and Leong, A. Y. L. (ed.) 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today. Kuala Lumpur, Malaysia 06 - 08 Nov 2012 Kowloon, Hong Kong.
A pilot study on flexural properties of epoxy nanoclay reinforced composites
Ku, H., Fung, S. Y., Islam, M., Li, X. and Chong, Y. P.. 2013. "A pilot study on flexural properties of epoxy nanoclay reinforced composites ." Journal of Reinforced Plastics and Composites. 32 (2), pp. 96-104. https://doi.org/10.1177/0731684412459246
Bio-resins: new structural renewable materials for bio-composite applications
Cardona, Francisco. 2012. "Bio-resins: new structural renewable materials for bio-composite applications ." 4th KKU International Engineering Conference: Driving Together Towards ASEAN Economic Community (KKU-IENC 2012) . Khon Kaen University, Thailand 10 - 12 May 2012 Khon Kaen, Thailand.
Compressive properties of chemically-treated hemp fibre reinforced composites
Kabir, Mohammad Mazedul, Wang, Hao, Lau, Alan, Cardona, Francisco and Aravinthan, Thiru. 2012. "Compressive properties of chemically-treated hemp fibre reinforced composites." Heslehurst, Rikard Benton and Byrne, Ann (ed.) Composites Australia and the CRC for Advanced Composite Structures Conference 2012: Diversity in Composites. Leura, Australia 15 - 16 Mar 2012 Melbourne, Australia.
Green building materials: hemp oil based biocomposites
Manthey, Nathan W., Cardona, Francisco, Francucci, Gaston M. and Aravinthan, Thiru. 2012. "Green building materials: hemp oil based biocomposites." 2012 World Academy of Science, Engineering and Technology Conference (WASET 2012). Bali, Indonesia 24 - 25 Oct 2012 Canakkale, Turkey.
Reinforcement of corroded steel structures with CFRP panels
Cardona, Francisco, Tawfik, Qaidar H. and Karunasena, Karu. 2012. "Reinforcement of corroded steel structures with CFRP panels." ICACE 2012: International Conference on Architectural and Civil Engineering. Bali, Indonesia 24 - 25 Oct 2012 Canakkale, Turkey.
Review on using packages to enhance the teaching of critical path networks
Ku, Harry S.. 2012. "Review on using packages to enhance the teaching of critical path networks." Ao, S. I., Castillo, Oscar, Douglas, Craig, Feng, David Dagan and Lee, Jeong-A. (ed.) 2012 International MultiConference of Engineers and Computer Scientists (IMECS 2012). Hong Kong, China 14 - 16 Mar 2012 Hong Kong.
Measurements of heat treatment effects on bovine cortical bones by nanoindentation and compression testing
Lau, Mei-Ling, Lau, Kin-Tak, Ku, Harry, Bahattacharyya, Debes and Yao, Yan-Dong. 2012. "Measurements of heat treatment effects on bovine cortical bones by nanoindentation and compression testing." Journal of Biomaterials and Nanobiotechnology. 3 (1), pp. 105-113. https://doi.org/10.4236/jbnb.2012.31014
Suitability of using coir fiber/polymeric composite for the design of liquid storage tanks
Yousif, B. F. and Ku, H.. 2012. "Suitability of using coir fiber/polymeric composite for the design of liquid storage tanks." Materials and Design. 36, pp. 847-853. https://doi.org/10.1016/j.matdes.2011.01.063
Modeling the flexural properties of SLG reinforced phenol formaldehyde composites using Langrage’s Method
Ku, H., Zhou, Hong, Wong, Peter, Su, Gang and Vadher, Jayent. 2012. "Modeling the flexural properties of SLG reinforced phenol formaldehyde composites using Langrage’s Method ." Advanced Materials Research. 410, pp. 305-308. https://doi.org/10.4028/www.scientific.net/AMR.410.305
Flexural properties of epoxy composites filled with glass powder: preliminary results
Ku, H., Wong, P., Huang, J., Fung, H. and Trada, M.. 2012. "Flexural properties of epoxy composites filled with glass powder: preliminary results." Advanced Materials Research. 410, pp. 309-312. https://doi.org/10.4028/www.scientific.net/AMR.410.309
Cure kinetic study of epoxidized hemp oil cured with a multiple catalytic system
Manthey, Nathan W., Cardona, Francisco and Aravinthan, Thiru. 2012. "Cure kinetic study of epoxidized hemp oil cured with a multiple catalytic system." Journal of Applied Polymer Science. 125 (S2), pp. E511-E517. https://doi.org/10.1002/app.35561
Tensile properties of phenol-formaldehyde nanoclay reinforced composites: a pilot study
Ku, H., Yap, Y. S., Lee, T. S. and Trada, M.. 2012. "Tensile properties of phenol-formaldehyde nanoclay reinforced composites: a pilot study ." Journal of Applied Polymer Science. 126 (2 (Supplement)), pp. E142-E150. https://doi.org/10.1002/app.35232
Chemical treatments on plant-based natural fibre reinforced polymer composites: an overview
Kabir, M. M., Wang, H., Lau, K. T. and Cardona, F.. 2012. "Chemical treatments on plant-based natural fibre reinforced polymer composites: an overview ." Composites Part B: Engineering. 43 (7), pp. 2883-2892. https://doi.org/10.1016/j.compositesb.2012.04.053
A review on the characteristics of gomuti fibre and its composites with thermoset resins
Ticoalu, Adriana, Aravinthan, Thiru and Cardona, Francisco. 2013. "A review on the characteristics of gomuti fibre and its composites with thermoset resins." Journal of Reinforced Plastics and Composites. 32 (2), pp. 124-136. https://doi.org/10.1177/0731684412463109
A critical review on the manufacturing processes in relation to the properties of nanoclay/polymer composites
Albdiry, M. T., Yousif, B. F., Ku, H. and Lau, K. T.. 2013. "A critical review on the manufacturing processes in relation to the properties of nanoclay/polymer composites." Journal of Composite Materials. 47 (9), pp. 1093-1115. https://doi.org/10.1177/0021998312445592
Fracture toughness of vinyl ester composites reinforced with sawdust and postcured in microwaves
Ku, H., Prajapati, M. and Trada, M.. 2012. "Fracture toughness of vinyl ester composites reinforced with sawdust and postcured in microwaves." International Journal of Microwave Science and Technology. 2012, pp. 1-8. https://doi.org/10.1155/2012/152726
Courses for teaching leadership capacity in professional engineering degrees in Australia and Europe
Khattak, Hamid, Ku, Harry and Goh, Steven. 2012. "Courses for teaching leadership capacity in professional engineering degrees in Australia and Europe." European Journal of Engineering Education. 37 (3), pp. 279-296. https://doi.org/10.1080/03043797.2012.684671
Cure kinetics of an acrylated epoxidized hemp oil-based bioresin system
Francucci, Gaston, Cardona, Francisco and Manthey, Nathan W.. 2013. "Cure kinetics of an acrylated epoxidized hemp oil-based bioresin system." Journal of Applied Polymer Science. 128 (3), pp. 2030-2037. https://doi.org/10.1002/app.38380
Thermal properties of calcium carbonate powder reinforced vinyl ester composites: pilot study
Ku, Harry, Cardona, Francisco and Jamal Eddine, Mustapha. 2013. "Thermal properties of calcium carbonate powder reinforced vinyl ester composites: pilot study." Journal of Applied Polymer Science. 127 (4), pp. 2996-3001. https://doi.org/10.1002/app.37973
Flexural properties of sawdust-reinforced epoxy composites post-cured in microwaves
Ku, H., Donald, M., Cardona, F. and Trada, M.. 2012. "Flexural properties of sawdust-reinforced epoxy composites post-cured in microwaves." Journal of Composite Materials. 46 (22), pp. 2879-2890. https://doi.org/10.1177/0021998311433437
Mechanical properties of chemically-treated hemp fibre reinforced sandwich composites
Kabir, M. M., Wang, H., Lau, K. T., Cardona, F. and Aravinthan, T.. 2012. "Mechanical properties of chemically-treated hemp fibre reinforced sandwich composites." Composites Part B: Engineering. 43 (2), pp. 159-169. https://doi.org/10.1016/j.compositesb.2011.06.003
Contrast on tensile and flexural properties of glass powder reinforced epoxy composites: pilot study
Ku, H. and Wong, P.. 2012. "Contrast on tensile and flexural properties of glass powder reinforced epoxy composites: pilot study ." Journal of Applied Polymer Science. 123 (1), pp. 152-161. https://doi.org/10.1002/app.34469
Synthesis of elastomeric phenolic resins with improved toughness and flexibility
Cardona, F. and Fedrigo, J.. 2011. "Synthesis of elastomeric phenolic resins with improved toughness and flexibility ." EUROTEC 2011: Inaugural European Technical Conference on Plastics. Barcelona, Spain 14 - 15 Nov 2011 Newtown, CT. United States.
Natural fibre composites with QLD based fibres and vegetable oils
Manthey, N. W., Cardona, F., Aravinthan, T., Wang, H. and Cooney, T.. 2011. "Natural fibre composites with QLD based fibres and vegetable oils." Fragomeni, Sam, Venkatesan, Srikanth, Lam, Nelson T. K. and Setunge, Sujeeva (ed.) 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM 21). Melbourne, Australia 07 - 10 Dec 2010 Leiden, Netherlands.
Using computer software packages to enhance the teaching of engineering management science: part 1 - critical path networks
Ku, H., Fulcher, R. and Xiang, W.. 2011. "Using computer software packages to enhance the teaching of engineering management science: part 1 - critical path networks." Computer Applications in Engineering Education. 19 (1), pp. 26-39. https://doi.org/10.1002/cae.20286
A pilot study on the relationship between mechanical and electrical loss tangents of glass powder reinforced epoxy composites post-cured in microwaves
Ku, H., Wong, P., Maxwell, A., Huang, J., Fung, H. and Mohan, T.. 2011. "A pilot study on the relationship between mechanical and electrical loss tangents of glass powder reinforced epoxy composites post-cured in microwaves." Zhu, Zeng (ed.) ICKEM 2011: 1st International Conference on Key Engineering Materials. Sanya, China 25 - 27 Mar 2011 Zurich, Switzerland. https://doi.org/10.4028/www.scientific.net/AMR.214.26
Flexible engineering degree programs with remote access laboratories in an Australian regional university known for its excellence in e-learning
Ku, H., Goh, S. and Ahfock, A.. 2011. "Flexible engineering degree programs with remote access laboratories in an Australian regional university known for its excellence in e-learning." Computer Applications in Engineering Education. 19 (1), pp. 18-25. https://doi.org/10.1002/cae.20284
Effect of chemical treatment on the mechanical and thermal properties of hemp fibre reinforced thermoset sandwich composites
Kabir, M. M., Wang, H., Cardona, F. and Aravinthan, T.. 2011. "Effect of chemical treatment on the mechanical and thermal properties of hemp fibre reinforced thermoset sandwich composites." Fragomeni, Sam, Venkatesan, Srikanth, Lam, Nelson T. K. and Setunge, Sujeeva (ed.) 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM 21). Melbourne, Australia 07 - 10 Dec 2010 Leiden, Netherlands. https://doi.org/10.1201/b10571-78
Assessing heat-treatment effects on bovine cortical bones by nanoindentation
Lau, Mei-ling, Lau, Kin-tak, Ku, Harry, Bahattacharyya, Debes and Lee, Joong-Hee. 2012. "Assessing heat-treatment effects on bovine cortical bones by nanoindentation ." Advanced Materials Research. https://doi.org/10.4028/www.scientific.net/AMR.410.110
Experimental investigation into gomuti fibres/polyester composites
Ticoalu, A., Aravinthan, T. and Cardona, F.. 2011. "Experimental investigation into gomuti fibres/polyester composites." Fragomeni, Sam, Venkatesan, Srikanth, Lam, Nelson T. K. and Setunge, Sujeeva (ed.) 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM 21). Melbourne, Australia 07 - 10 Dec 2010 Leiden, Netherlands. https://doi.org/10.1201/b10571-80
Relationship between different mechanical properties of phenol formaldehyde SLG-reinforced composites
Ku, H. S.. 2011. "Relationship between different mechanical properties of phenol formaldehyde SLG-reinforced composites." Journal of Reinforced Plastics and Composites. 30 (15), pp. 1281-1292. https://doi.org/10.1177/0731684411418705
Novel phenolic resins with improved mechanical and toughness properties
Cardona, Francisco, Lau, Alan Kin-Tak and Fedrigo, Jessica. 2012. "Novel phenolic resins with improved mechanical and toughness properties." Journal of Applied Polymer Science. 123 (4), pp. 2131-2139. https://doi.org/10.1002/app.34719
Relationship between electrical and mechanical loss tangents of hollow glass powder reinforced epoxy composites: a pilot study
Ku, H., Maxwell, A., Wong, P., Huang, J. and Fung, H.. 2011. "Relationship between electrical and mechanical loss tangents of hollow glass powder reinforced epoxy composites: a pilot study ." Journal of Applied Polymer Science. 119 (5), pp. 2945-2952. https://doi.org/10.1002/app.33009
Synthesis of phenolic bio-resins for advanced composites in civil engineering structures
Cardona, Francisco, Aravinthan, Thiru, Fedrigo, Jessica and Moscou, Clarisse. 2010. "Synthesis of phenolic bio-resins for advanced composites in civil engineering structures." Goh, Steven C. and Wang, Hao (ed.) 2010 Southern Region Engineering Conference (SREC 2010). Toowoomba, Australia 11 - 12 Nov 2010 Toowoomba, Australia.
Synthesis and characterization of modified phenolic resins for composites with enhanced mechanical properties
Cardona, F. and Moscou, C.. 2009. "Synthesis and characterization of modified phenolic resins for composites with enhanced mechanical properties." Aravinthan, Thiru, Karunasena, Warna (Karu) and Wang, Hao (ed.) 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM20). Toowoomba, Australia 02 - 05 Dec 2008 London, United Kingdom.
An investigation into the application of research strategies in the final-year undergraduate engineering and surveying projects
Cochrane, Sandra, Goh, Steven and Ku, Harry. 2009. "An investigation into the application of research strategies in the final-year undergraduate engineering and surveying projects." Kestell, Colin, Grainger, Steven and Cheung, John (ed.) 20th Annual Conference for the Australasian Association of Engineering Education (AAEE 2009). Adelaide, Australia 06 - 09 Dec 2009 Adelaide, Australia.
Engineering education - undergraduate and masters: China and down under
Ku, Harry, Wen, Paul, Xiang, Wei and Goh, Steven. 2009. "Engineering education - undergraduate and masters: China and down under." Kestell, Colin, Grainger, Steven and Cheung, John (ed.) 20th Annual Conference for the Australasian Association of Engineering Education (AAEE 2009). Adelaide, Australia 06 - 09 Dec 2009 Adelaide, Australia.
Research design for investigation of Nigeria manufacturing management
Mustapha, U. M., Ku, H. and Goh, S.. 2009. "Research design for investigation of Nigeria manufacturing management." Wen, Peng, Li, Yuefeng, Polkowski, Lech, Yao, Yiyu, Tsumoto, Shusaku and Wang, Guoyin (ed.) 4th International Conference on Rough Sets and Knowledge Technology (RSKT 2009). Gold Coast, Australia 14 - 16 Jul 2009 Berlin, Germany. Springer. https://doi.org/10.1007/978-3-642-02962-2_58
Effects of chopped hemp on mechanical and thermal properties of epoxy resins
Vandenbroucke, A., Cardona, F., Ku, H. and Rogers, D.. 2009. "Effects of chopped hemp on mechanical and thermal properties of epoxy resins ." Aravinthan, Thiru, Karunasena, Warna (Karu) and Wang, Hao (ed.) 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM20). Toowoomba, Australia 02 - 05 Dec 2008 London, United Kingdom.
Effects of EPON on mechanical and thermal properties of epoxy resins
Ku, H., Cardona, F., Rogers, D. and Vandenbroucke, A.. 2008. "Effects of EPON on mechanical and thermal properties of epoxy resins ." Lau, Alan K. T., Lu, J., Varadan, Vijay K., Chang, F. K., Tu, J. P. and Lam, P. M. (ed.) ICMMSE 2008: International Conference on Multifunctional Materials and Structures. Hong Kong, China 28 - 31 Jul 2008 Stafa-Zurich, Switzerland. https://doi.org/10.4028/www.scientific.net/AMR.47-50.536
Weldability and heat affected zone (HAZ) evaluation for high energy rate joining of thermoplastic composites using microwaves
Ku, Harry S., Siores, Elias and Ball, James A. R.. 1997. "Weldability and heat affected zone (HAZ) evaluation for high energy rate joining of thermoplastic composites using microwaves ." Herszberg, Isreal (ed.) 11th International Conference on Composite Materials (ICCM-11). Gold Coast, Australia 14 - 18 Jul 1997 Cambridge, United Kingdom.
Complex permittivity of low loss thermoplastic composites using a resonant cavity method
Ku, Harry S., Ball, James A. R., Siores, Elias and Chan, Peter. 1999. "Complex permittivity of low loss thermoplastic composites using a resonant cavity method ." Massard, Thierry and Vautrin, Alain (ed.) 12th International Conference on Composite Materials (ICCM-12). Paris, France 05 - 09 Jul 1999 Cambridge, United Kingdom.
Prediction of crushing stress in composite materials
Goh, S., Ku, H. and Ang, S. L.. 2008. "Prediction of crushing stress in composite materials." Journal of Composite Materials. 42 (5), pp. 467-484. https://doi.org/10.1177/0021998307086204
Micrographs of fractured vinyl ester composites
Ku, Harry S., Ang, Soh Fong, Snook, Chris and Baddeley, Douglas. 2007. "Micrographs of fractured vinyl ester composites." Journal of Reinforced Plastics and Composites. 26 (11), pp. 1111-1134. https://doi.org/10.1177/0731684407079778
Processing of polymer matrix composites using variable frequency microwave (VFM)
Ku, Harry S., Siores, Elias, Ball, James A. R. and Chan, Peter. 2001. "Processing of polymer matrix composites using variable frequency microwave (VFM) ." Zhang, Yao (ed.) 13th International Conference on Composite Materials (ICCM-13) . Beijing, China 25 - 29 Jun 2001 China.
Variable frequency microwave (VFM) processing facilities and application in processing thermoplastic matrix composites
Ku, H. S., Siu, F., Siores, E. and Ball, J. A. R.. 2003. "Variable frequency microwave (VFM) processing facilities and application in processing thermoplastic matrix composites." Journal of Materials Processing Technology. 139 (1-3), pp. 291-295. https://doi.org/10.1016/S0924-0136(03)00238-3
Impact strength of vinyl ester composites cured by microwave irradiation: preliminary results
Cheng, Y. M., Ku, Harry S., Snook, Chris and Baddeley, Douglas. 2004. "Impact strength of vinyl ester composites cured by microwave irradiation: preliminary results." Proceedings of the Institution of Mechanical Engineers Part L: Journal of Materials, Design and Applications. https://doi.org/10.1177/146442070421800405
Short bar tests for vinyl ester particulate reinforced composites cured by microwaves
Ku, Harry S., Tsang, Shing Hin, Baddeley, Douglas and Snook, Chris. 2006. "Short bar tests for vinyl ester particulate reinforced composites cured by microwaves." Australian Journal of Structural Engineering. 7 (1), pp. 65-73.
Fracture toughness of vinyl ester composites cured by microwave irradiation: preliminary results
Ku, Harry S., Baddeley, Douglas, Snook, Chris and Chew, C. S.. 2005. "Fracture toughness of vinyl ester composites cured by microwave irradiation: preliminary results." Journal of Reinforced Plastics and Composites. 24 (11), pp. 1181-1202. https://doi.org/10.1177/0731684405048841
Micrographs of the fracture of vinyl ester composites cured by microwaves: pilot study
Chew, C. S., Ku, Harry S., Baddeley, Douglas and Snook, Chris. 2005. "Micrographs of the fracture of vinyl ester composites cured by microwaves: pilot study." Journal of Electromagnetic Waves and Applications. 19 (1), pp. 67-82. https://doi.org/10.1163/1569393052955080
Drop weight impact test fracture of vinyl ester composites: micrographs of pilot study
Ku, Harry S., Cheng, Y. M., Snook, Chris and Baddeley, Douglas. 2005. "Drop weight impact test fracture of vinyl ester composites: micrographs of pilot study." Journal of Composite Materials. 39 (18), pp. 1607-1620. https://doi.org/10.1177/0021998305051111
Flexural properties of phenolic resin reinforced with glass powder: preliminary results
Ku, H., Trada, M., Nixon, R. and Wong, P.. 2010. "Flexural properties of phenolic resin reinforced with glass powder: preliminary results ." Journal of Applied Polymer Science. 116 (1), pp. 347-354. https://doi.org/10.1002/app.31608
Interfacial bonding characteristic of nanoclay/polymer composites
Chan, Mo-lin, Lau, Kin-tak, Wong, T. T. and Cardona, Francisco. 2011. "Interfacial bonding characteristic of nanoclay/polymer composites." Applied Surface Science. 258 (2), pp. 860-864. https://doi.org/10.1016/j.apsusc.2011.09.016
Tensile tests of phenol formaldehyde glass-powder-reinforced composites: pilot study
Ku, H., Trada, M., Cecil, T. and Wong, P.. 2010. "Tensile tests of phenol formaldehyde glass-powder-reinforced composites: pilot study." Journal of Applied Polymer Science. 116 (1), pp. 10-17. https://doi.org/10.1002/app.31424
Kinetics of in situ epoxidation of hemp oil under heterogeneous reaction conditions: an overview with preliminary results
Cooney, T. I., Cardona, F. and Tran-Cong, T.. 2011. "Kinetics of in situ epoxidation of hemp oil under heterogeneous reaction conditions: an overview with preliminary results." Cowled, Craig J. L. (ed.) 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing (eddBE 2011). Brisbane, Australia 27 - 29 Apr 2011 Brisbane, Australia.
Mechanical properties of epoxidized hemp oil based biocomposites: preliminary results
Manthey, N. W., Cardona, F. and Aravinthan, T.. 2011. "Mechanical properties of epoxidized hemp oil based biocomposites: preliminary results." Cowled, Craig J. L. (ed.) 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing (eddBE 2011). Brisbane, Australia 27 - 29 Apr 2011 Brisbane, Australia.
Remote access laboratories in Australia and Europe
Ku, H., Ahfock, T. and Yusaf, T.. 2011. "Remote access laboratories in Australia and Europe." European Journal of Engineering Education. 36 (3), pp. 253-268. https://doi.org/10.1080/03043797.2011.578244
Cure kinetics of an epoxidized hemp oil based bioresin system
Manthey, Nathan W., Cardona, Francisco, Aravinthan, Thiru and Cooney, Tyson. 2011. "Cure kinetics of an epoxidized hemp oil based bioresin system." Journal of Applied Polymer Science. 122 (1), pp. 444-451. https://doi.org/10.1002/app.34086
A review of current development in natural fiber composites for structural and infrastructure applications
Ticoalu, A., Aravinthan, T. and Cardona, F.. 2010. "A review of current development in natural fiber composites for structural and infrastructure applications." Goh, Steven C. and Wang, Hao (ed.) 2010 Southern Region Engineering Conference (SREC 2010). Toowoomba, Australia 11 - 12 Nov 2010 Toowoomba, Australia.
Literature review of past and present performance of the Nigerian manufacturing sector
Ku, H. S-L., Mustapha, U. and Goh, S.. 2010. "Literature review of past and present performance of the Nigerian manufacturing sector ." IMechE 2010: Institution of Mechanical Engineers. Lyon, France 04 Nov 2010 United Kingdom. SAGE Publications Ltd. https://doi.org/10.1243/09544054JEM1818
Preliminary results on literature review skills of students doing capstone projects
Ku, Harry S. and Goh, Steven C.. 2010. "Preliminary results on literature review skills of students doing capstone projects." Goh, Steven C. and Wang, Hao (ed.) 2010 Southern Region Engineering Conference (SREC 2010). Toowoomba, Australia 11 - 12 Nov 2010 Toowoomba, Australia.
Effects of natural fibre surface on composite properties: a review
Kabir, M. M., Wang, H., Aravinthan, T., Cardona, F. and Lau, K. -T.. 2011. "Effects of natural fibre surface on composite properties: a review." Cowled, Craig J. L. (ed.) 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing (eddBE 2011). Brisbane, Australia 27 - 29 Apr 2011 Brisbane, Australia.
A review on the tensile properties of natural fiber reinforced polymer composites
Ku, H., Wang, H., Pattarachaiyakoop, N. and Trada, M.. 2011. "A review on the tensile properties of natural fiber reinforced polymer composites ." Composites Part B: Engineering. 42 (4), pp. 856-873. https://doi.org/10.1016/j.compositesb.2011.01.010
Qualitative methodologies for dummies: engineers in investigating the quality of final year engineering research project
Goh, Steven and Ku, Harry. 2010. "Qualitative methodologies for dummies: engineers in investigating the quality of final year engineering research project." Hudson, Peter, Chandra, Vinesh, King, Donna and Lee, Kar-Tin (ed.) 1st Science, Technology, Engineering and Mathematics in Education Conference (STEM 2010). Brisbane, Australia 26 - 27 Nov 2010 Brisbane, Australia.
Effect of tannin on flexural properties of phenol formaldehyde glycerol reinforced composites: preliminary results
Cardona, F., Ku, H. and Chouzenoux, L.. 2010. "Effect of tannin on flexural properties of phenol formaldehyde glycerol reinforced composites: preliminary results ." Journal of Reinforced Plastics and Composites. 29 (24), pp. 3543-3553. https://doi.org/10.1177/0731684410381152
Work in Progress - Intervening to Improve the Dissertation of Final Year Engineering Research Projects
Goh, Steven and Ku, Harry. 2011. "Work in Progress - Intervening to Improve the Dissertation of Final Year Engineering Research Projects." 41st ASEE/IEEE Frontiers in Education Conference (FIE 2011): Celebrating 41 Years of Monumental Innovations from around the World. Rapid City, United States 12 - 15 Oct 2011 United States. https://doi.org/10.1109/FIE.2011.6142897
Natural fibre composites with epoxidized vegetable oil (EVO) resins: a review
Manthey, N. W., Cardona, F., Aravinthan, T., Wang, H. and Cooney, T.. 2010. "Natural fibre composites with epoxidized vegetable oil (EVO) resins: a review." Goh, Steven C. and Wang, Hao (ed.) 2010 Southern Region Engineering Conference (SREC 2010). Toowoomba, Australia 11 - 12 Nov 2010 Toowoomba, Australia.
Modified PF resins for composite structures with improved mechanical properties
Cardona, F., Aravinthan, T. and Moscou, C.. 2010. "Modified PF resins for composite structures with improved mechanical properties." Polymers and Polymer Composites. 18 (6), pp. 297-306.
Using computer software packages to enhance the teaching in engineering management science: part 3 - simulation
Ku, H. and Fulcher, R.. 2012. "Using computer software packages to enhance the teaching in engineering management science: part 3 - simulation ." Computer Applications in Engineering Education. 20 (3), pp. 547-552. https://doi.org/10.1002/cae.20423
Using computer software packages to enhance the teaching in engineering management science: part 2 - programming techniques
Ku, H. and Fulcher, R.. 2012. "Using computer software packages to enhance the teaching in engineering management science: part 2 - programming techniques ." Computer Applications in Engineering Education. 20 ( 1), pp. 114-123. https://doi.org/10.1002/cae.20379
A pilot study on the flexural properties of vinyl ester composites filled with glass powder
Ku, H., Trada, M. and Huq, R.. 2010. "A pilot study on the flexural properties of vinyl ester composites filled with glass powder ." Advanced Materials Research. 123-125, pp. 3-6. https://doi.org/10.4028/www.scientific.net/AMR.123-125.3
Development of polymer network of phenolic and epoxies resins mixed with linseed oil: pilot study
Ku, H., Cardona, F., Rogers, D. and Munoz, J.-C.. 2010. "Development of polymer network of phenolic and epoxies resins mixed with linseed oil: pilot study ." Journal of Materials Engineering and Performance. 19 (6), pp. 912-919. https://doi.org/10.1007/s11665-009-9549-9
Final year engineering projects in Australia and Europe
Ku, H. and Goh, S.. 2010. "Final year engineering projects in Australia and Europe." European Journal of Engineering Education. 35 (2), pp. 161-173. https://doi.org/10.1080/03043790903497336
Optimum percentage of fly ash reinforcement in vinyl ester composites
Ku, H., Kota, V. and Trada, M.. 2010. "Optimum percentage of fly ash reinforcement in vinyl ester composites ." Journal of Materials in Civil Engineering. 22 (1), pp. 104-107. https://doi.org/10.1061/(ASCE)0899-1561(2010)22:1(104)
A lucrative export - engineering education: down under
Ross, David, Ku, Harry S. and Penfold, Peter. 2009. "A lucrative export - engineering education: down under." DIAS Technology Review. 5 (2), pp. 14-23.
Flexural properties of sawdust reinforced phenolic composites: pilot study
Ku, Harry Siu-Lung, Cardona, Francisco, Trada, Mohar and Vigier, Gurlaume. 2009. "Flexural properties of sawdust reinforced phenolic composites: pilot study." Journal of Applied Polymer Science. 114 (3), pp. 1927-1934. https://doi.org/10.1002/app.30610
Engineering education in China and Australia: addressing the demand-supply gap
Ku, Siu Lung Harry, Wen, Peng and Xiang, Wei. 2010. "Engineering education in China and Australia: addressing the demand-supply gap." Hong Kong Institution of Engineers, Transactions. 17 (2), pp. 20-26.
Flexural properties of phenolic resin reinforced with glass powder
Ku, Harry S., Trada, Mohan, Zong, Xuejin and Wong, Peter. 2009. "Flexural properties of phenolic resin reinforced with glass powder." Liao, W. H. (ed.) ICAST 2009: 20th International Conference on Adaptive Structures and Technologies . Shatin, Hong Kong 20 - 22 Oct 2009 Hong Kong.
Flexural strength of phenol formaldehyde composites post-cured in microwaves: preliminary results
Trada, Mohan, Ku, Harry and Vedhar, Jayant. 2009. "Flexural strength of phenol formaldehyde composites post-cured in microwaves: preliminary results ." Advanced Materials Research. https://doi.org/10.4028/www.scientific.net/AMR.79-82.1399
Teaching of critical path networks using software packages
Ku, H.. 2009. "Teaching of critical path networks using software packages ." Wen, Peng, Li, Yuefeng, Polkowski, Lech, Yao, Yiyu, Tsumoto, Shusaku and Wang, Guoyin (ed.) 4th International Conference on Rough Sets and Knowledge Technology (RSKT 2009). Gold Coast, Australia 14 - 16 Jul 2009 Berlin, Germany. Springer. https://doi.org/10.1007/978-3-642-02962-2_55
Natural fibre-reinforced composites for bioengineering and environmental engineering
Cheung, Hoi-Yan, Ho, Mei-Po, Lau, Kin-Tak, Cardona, Francisco and Hui, David. 2009. "Natural fibre-reinforced composites for bioengineering and environmental engineering." Composites Part B: Engineering. 40 (7), pp. 655-663. https://doi.org/10.1016/j.compositesb.2009.04.014
Fracture toughness of phenol formaldehyde composites reinforced with e-spheres
Ku, H., Cardona, F., Pattarachaiyakoop, N. and Trada, M.. 2009. "Fracture toughness of phenol formaldehyde composites reinforced with e-spheres ." Journal of Composite Materials. 43 (7), pp. 741-754. https://doi.org/10.1177/0021998308101296
Contrasts on fracture toughness and flexural strength of varying percentages of SLG-reinforced phenolic composites
Ku, H. S., Fok, S. C. and Siores, E.. 2009. "Contrasts on fracture toughness and flexural strength of varying percentages of SLG-reinforced phenolic composites." Journal of Composite Materials. 43 (8), pp. 885-895. https://doi.org/10.1177/0021998308103159
A simplified empirical model for prediction of mechanical properties of random short fiber/vinylester composites
Epaarachchi, J., Ku, H. and Gohel, K.. 2010. "A simplified empirical model for prediction of mechanical properties of random short fiber/vinylester composites." Journal of Composite Materials. 44 (6), pp. 779-788. https://doi.org/10.1177/0021998309346383
Flexural tests of phenol formaldehyde and SLG composites: pilot study
Cardona, F., Rogers, D., Gurney, R., Trada, M. and Ku, H.. 2009. "Flexural tests of phenol formaldehyde and SLG composites: pilot study ." Journal of Reinforced Plastics and Composites. 28 (22), pp. 2761-2769. https://doi.org/10.1177/0731684408093871
Use of wireless tablet PCs as an effective learning and teaching enhancement tool
Xiang, Wei, Goh, Steven, Pather, Selvan, Maxwell, Andrew, Wang, Hao and Ku, Harry. 2009. "Use of wireless tablet PCs as an effective learning and teaching enhancement tool." Foley, Chris (ed.) EDUCAUSE Australasia Conference 2009: Innovate, Collaborate and Sustain. Perth, Australia 03 - 06 May 2009 Wembley, Western Australia.
Mathematical modeling of the fracture toughness of phenol formaldehyde composites reinforced with E-spheres
Ku, H., Xiang, W. and Pattarachaiyakoop, N.. 2009. "Mathematical modeling of the fracture toughness of phenol formaldehyde composites reinforced with E-spheres ." Advanced Materials Research. 79-82, pp. 1165-1168. https://doi.org/10.4028/www.scientific.net/AMR.79-82.1165
Tensile tests of phenol formaldehyde SLG reinforced composites: pilot study
Ku, H., Jacobson, W., Trada, M., Cardona, F. and Rogers, D.. 2008. "Tensile tests of phenol formaldehyde SLG reinforced composites: pilot study." Journal of Composite Materials. 42 (26), pp. 2783-2793. https://doi.org/10.1177/0021998308096334
Relationship between electrical and mechanical loss tangents of SLG reinforced phenolic composites: pilot study
Ku, H., Cardona, F., Ball, J., Jacobson, W. and Trada, M.. 2008. "Relationship between electrical and mechanical loss tangents of SLG reinforced phenolic composites: pilot study ." Journal of Composite Materials. 42 (19), pp. 2083-2095. https://doi.org/10.1177/0021998308094548
Hong Kong Higher Diploma in Engineering and Australian Bachelor of Technology in Engineering: similarities and differences
Morgan, Michael J., Fulcher, Robert and Ku, Harry S.. 1996. "Hong Kong Higher Diploma in Engineering and Australian Bachelor of Technology in Engineering: similarities and differences." Asia Engineer.
Articulation, credit transfer and flexible delivery of engineering degree courses: Australia, Malaysia and Hong Kong
Morgan, M. J., Fulcher, R. L. and Ku, H. S.. 1998. "Articulation, credit transfer and flexible delivery of engineering degree courses: Australia, Malaysia and Hong Kong." Jurutera: Institution of Engineers Malaysia Monthly Bulletin. 1998 (1), pp. 57-67.
Innovative residential schools for engineering degree courses
Morgan, Michael J., Fulcher, Robert and Ku, Harry S.. 1999. "Innovative residential schools for engineering degree courses ." Quarterly Journal of Singapore Institute of Engineering Technologists. 18 (4), pp. 53-58.
Loss tangent for low loss thermoplastic composites
Ku, Harry S., Ball, James A. R., Siores, Elias and Chan, Peter. 1999. "Loss tangent for low loss thermoplastic composites ." Science and Engineering of Composite Materials. 8 (3), pp. 123-128.
Microwave facilities for welding thermoplastic composites and preliminary results
Ku, Harry S., Siores, Elias and Ball, James A. R.. 1999. "Microwave facilities for welding thermoplastic composites and preliminary results." Journal of Microwave Power and Electromagnetic Energy. 34 (4), pp. 195-205.
Variable frequency microwave (VFM) processing facilities and application in processing thermoplastic matrix composites
Ku, Harry S., Siu, Fred, Siores, Elias, Ball, James A. R. and Blicblau, A. S.. 2000. "Variable frequency microwave (VFM) processing facilities and application in processing thermoplastic matrix composites ." Lee, W. B. (ed.) IMCC'2000: 9th International Manufacturing Conference in China: Innovation and Technology for the New Millennium. Hong Kong, China 16 - 17 Aug 2000 Hong Kong.
Microwave processing and permittivity measurement of thermoplastic composites at elevated temperature
Ku, Harry S., Ball, James A. R., Siores, Elias and Horsfield, Brendan. 1999. "Microwave processing and permittivity measurement of thermoplastic composites at elevated temperature ." Journal of Materials Processing Technology. 89-90, pp. 419-424. https://doi.org/10.1016/S0924-0136(99)00018-7
An important step in microwave processing of materials: permittivity measurements of thermoplastic composites at elevated temperatures
Ku, Harry S., Siores, Elias, Ball, James A. R. and Horsfield, Brendan. 1998. "An important step in microwave processing of materials: permittivity measurements of thermoplastic composites at elevated temperatures." Salem, Sam (ed.) 1998 Pacific Conference on Manufacturing. Brisbane, Australia 18 - 21 Aug 1998 Brisbane, Australia.
Characterisation of thermoplastic matrix composites (TPC) using variable frequency micorwave (VFM)
Ku, Harry S., MacRobert, Martin, Siores, Elias and Ball, James A. R.. 2000. "Characterisation of thermoplastic matrix composites (TPC) using variable frequency micorwave (VFM)." Plastics Rubber and Composites. 29 (6), pp. 285-287.
Variable frequency microwave processing of thermoplastic composites
Ku, Harry S., MacRobert, Martin, Siores, Elias and Ball, James A. R.. 2000. "Variable frequency microwave processing of thermoplastic composites ." Plastics Rubber and Composites. 29 (6), pp. 278-284.
Effects of catalysts and post-curing conditions in the polymer network of epoxy and phenolic resins: preliminary results
Munoz, J.-C., Ku, H., Cardona, F. and Rogers, D.. 2008. "Effects of catalysts and post-curing conditions in the polymer network of epoxy and phenolic resins: preliminary results ." Journal of Materials Processing Technology. 202 (1-3), pp. 486-492. https://doi.org/10.1016/j.jmatprotec.2007.10.025
Investigation by TGA-FTIR of the effect of styrene content and thickness on the UV-curing of vinylester resins
Cardona, F., Rogers, D. and Van Erp, G.. 2007. "Investigation by TGA-FTIR of the effect of styrene content and thickness on the UV-curing of vinylester resins." Journal of Thermoplastic Composite Materials. 20 (6), pp. 601-615. https://doi.org/10.1177/0892705707083950
Fracture toughness of phenol formaldehyde composites: pilot study
Ku, Harry, Rogers, David, Davey, Robert, Cardona, Francisco and Trada, Mohan. 2008. "Fracture toughness of phenol formaldehyde composites: pilot study." Journal of Materials Engineering and Performance. 17 (1), pp. 85-90. https://doi.org/10.1007/s11665-007-9115-2
Contrast joints of glass-fibre with carbon-fibre reinforced low density polyethylene composite bonded by microwave irradiation
Ku, H. S.. 2008. "Contrast joints of glass-fibre with carbon-fibre reinforced low density polyethylene composite bonded by microwave irradiation." Journal of Electromagnetic Waves and Applications. 22 (1), pp. 69-84. https://doi.org/10.1163/156939308783122760
Processing of composites using variable and fixed frequency microwave facilities
Ku, Harry S. and Yusaf, Talal. 2008. "Processing of composites using variable and fixed frequency microwave facilities." Progress in Electromagnetic Research B. 5, pp. 185-205. https://doi.org/10.2528/PIERB08011304
Shrinkage reduction of thermoset fibre composites during hardening using microwaves irradiation for curing
Ku, Harry S., Van Erp, Gerard, Ball, James A. R., Ayers, Stephen R. and Siu, Fred. 2002. "Shrinkage reduction of thermoset fibre composites during hardening using microwaves irradiation for curing." Wong, S. V., Osman, M. R., Yusuff, R. M. and Ismail, N. (ed.) 2nd World Engineering Congress (WEC 2002). Sarawak, Malaysia 22 - 25 Jul 2002 Malaysia.
An evaluation of fracture toughness of vinyl ester composites cured under microwave conditions
Ku, H., Chan, W. L., Trada, M. and Baddeley, D.. 2007. "An evaluation of fracture toughness of vinyl ester composites cured under microwave conditions." Journal of Materials Engineering and Performance. 16 (6), pp. 741-745. https://doi.org/10.1007/s11665-007-9104-5
Managing the delivery of 'Manufacturing Processes' in an Australian regional university known for excellence in e-learning
Ross, David and Ku, Harry S.. 2007. "Managing the delivery of 'Manufacturing Processes' in an Australian regional university known for excellence in e-learning ." Delhi Institute of Advanced Studies Technology Review. 4 (1), pp. 46-54.
Relationship between microwave irradiation and constituents of composites during joining process
Ku, H. S., Ball, J. A. R. and Siores, E.. 2000. "Relationship between microwave irradiation and constituents of composites during joining process." Transactions, Hong Kong Institution of Engineers. 7 (3), pp. 43-49. https://doi.org/10.1080/1023697X.2000.10667833
Applications of microwaves in non-destructive testing
Ku, H. S., Siu, F., Siores, E. and Ball, J. A. R.. 2001. "Applications of microwaves in non-destructive testing." 10th Asia Pacific Conference on Non-Destructive Testing (2001). Brisbane, Australia 17 - 21 Sep 2001 Melbourne, Australia.
Studies on polymers and composites from lignin and fiber derived from sugar cane
Doherty, William, Halley, Peter J., Edye, Les, Rogers, David, Cardona, Francisco, Park, Yosup and Woo, Tim. 2007. "Studies on polymers and composites from lignin and fiber derived from sugar cane." Polymers for Advanced Technologies. 18 (8), pp. 673-678. https://doi.org/10.1002/pat.879
The process of updating engineering management science in an Australian regional university excellence in developing e-learning
Ku, Harry S. and Fulcher, Robert. 2007. "The process of updating engineering management science in an Australian regional university excellence in developing e-learning ." European Journal of Engineering Education. 32 (5), pp. 527-538. https://doi.org/10.1080/03043790701433319
Investigation of the effect of styrene content on the ultimate curing of vinylester resins by TGA-FTIR
Cardona, F., Rogers, D., Davey, S. and Van Erp, G.. 2007. "Investigation of the effect of styrene content on the ultimate curing of vinylester resins by TGA-FTIR." Journal of Composite Materials. 41 (2), pp. 137-152. https://doi.org/10.1177/002199830?063357
Fracture toughness of phenol formaldehyde composites post-cured in microwaves
Cardona, F., Ku, H., Pattarachaiyakoop, N., Rogers, D. and Trada, M.. 2007. "Fracture toughness of phenol formaldehyde composites post-cured in microwaves." Journal of Electromagnetic Waves and Applications. 21 (14), pp. 2137-2146. https://doi.org/10.1163/156939307783152867
Characterisation of chip-on-board (COB) encapsulate epoxies used in the printed circuit board assembly (PCBA) industry using variable frequency microwave (VFM) facilities
Ku, H. S., Siu, F., Mok, P. L., Siores, E. and Ball, J. A. R.. 2002. "Characterisation of chip-on-board (COB) encapsulate epoxies used in the printed circuit board assembly (PCBA) industry using variable frequency microwave (VFM) facilities." Wong, S. V., Osman, M. R., Yusuff, R. M. and Ismail, N. (ed.) 2nd World Engineering Congress (WEC 2002). Sarawak, Malaysia 22 - 25 Jul 2002 Selangor Darul Ehsan, Malaysia.
Applications of fixed and variable frequency microwave (VFM) facilities in polymeric materials processing and joining
Ku, H. S., Siu, F., Siores, E. and Ball, J. A. R.. 2002. "Applications of fixed and variable frequency microwave (VFM) facilities in polymeric materials processing and joining ." Wong, S. V., Osman, M. R., Yusuff, R. M. and Ismail, N. (ed.) 2nd World Engineering Congress (WEC 2002). Sarawak, Malaysia 22 - 25 Jul 2002 Selangor Darul Ehsan, Malaysia.
Contrast joints of glass-fibre with carbon-fibre reinforced polystyrene composite bonded by microwave irradiation
Ku, Harry S.. 2003. "Contrast joints of glass-fibre with carbon-fibre reinforced polystyrene composite bonded by microwave irradiation ." Transactions, Hong Kong Institution of Engineers. 10 (2), pp. 10-16.
Review - microwave processing of materials: part III
Ku, Harry S., Siores, Elias and Ball, James A. R.. 2001. "Review - microwave processing of materials: part III." Transactions, Hong Kong Institution of Engineers. 8 (3), pp. 44-50.
Review - microwave processing of materials: part II
Ku, Harry S., Siores, Elias and Ball, James A. R.. 2001. "Review - microwave processing of materials: part II." Transactions, Hong Kong Institution of Engineers. 8 (3), pp. 38-43.
Review - microwave processing of materials: part I
Ku, Harry S., Siores, Elias and Ball, James A. R.. 2001. "Review - microwave processing of materials: part I." Transactions, Hong Kong Institution of Engineers. 8 (3), pp. 31-37.
Permittivity measurement of thermoplastic composites at elevated temperature
Ku, Harry S., Horsfield, Brendan, Ball, James A. R. and Siores, Elias. 2001. "Permittivity measurement of thermoplastic composites at elevated temperature." Journal of Microwave Power and Electromagnetic Energy. 36 (2), pp. 101-111.
Applications of fixed and variable frequency microwave (VFM) facilities in polymeric materials processing and joining
Ku, H. S., Siu, F., Siores, E., Ball, J. A. R. and Blicblau, A. S.. 2001. "Applications of fixed and variable frequency microwave (VFM) facilities in polymeric materials processing and joining." 5th Asia Pacific Conference on Materials Processing. Seoul, South Korea 25 Jun 2001 Lausanne, Switzerland. https://doi.org/10.1016/S0924-0136(01)00642-2
Heat distribution and thermal analysis of joining thermoplastic composites using microwave energy
Ku, Harry S., Li, Chun Wai and Lee, Kin Fung. 2002. "Heat distribution and thermal analysis of joining thermoplastic composites using microwave energy." Institution of Engineers, Malaysia. Journal. 64 (2), pp. 6-12.
Microwave energy effects on polymer-matrix and fibre reinforcement of composites during bonding process by microwaves
Ku, Harry S., Siores, Elias and Ball, James A. R.. 2002. "Microwave energy effects on polymer-matrix and fibre reinforcement of composites during bonding process by microwaves." Institution of Engineers, Malaysia. Journal. 63 (4), pp. 20-27.
Lap shear strength comparison between two types of random carbon fibre reinforced thermoplastic matrix composites bonded using variable frequency microwaves (VFM) irradiation
Ku, Harry S., Siores, Elias and Ball, James A. R.. 2002. "Lap shear strength comparison between two types of random carbon fibre reinforced thermoplastic matrix composites bonded using variable frequency microwaves (VFM) irradiation." Journal of Materials Synthesis and Processing. 9 (6), pp. 353-361.
Joining of thirty three percent by weight random glass fibre reinforced polystyrene using variable frequency microwave
Ku, Harry S., Siores, Elias, Ball, James A. R. and Taube, Alex. 2002. "Joining of thirty three percent by weight random glass fibre reinforced polystyrene using variable frequency microwave." Institution of Engineers, Malaysia. Journal. 63 (2), pp. 18-24.
Risks involved in curing vinyl ester resins using microwaves irradiation
Ku, Harry S.. 2002. "Risks involved in curing vinyl ester resins using microwaves irradiation." Journal of Materials Synthesis and Processing. 10 (2), pp. 97-106.
Productivity improvements through the use of industrial microwave technologies
Ku, Harry S., Siores, Elias, Taube, Alex and Ball, James A. R.. 2002. "Productivity improvements through the use of industrial microwave technologies." Computers and Industrial Engineering. 42 (2-4), pp. 281-290.
Curing vinyl ester particle-reinforced composites using microwaves
Ku, H.. 2003. "Curing vinyl ester particle-reinforced composites using microwaves." Journal of Composite Materials. 37 (22), pp. 2027-2042. https://doi.org/10.1177/0021998303036266
Thermal analysis comparison between two random glass fibre reinforced thermoplastic matrix composites bonded by adhesives using microwaves: preliminary results
Ku, Harry S., Lee, Kin Fung and Li, Chun Wai. 2003. "Thermal analysis comparison between two random glass fibre reinforced thermoplastic matrix composites bonded by adhesives using microwaves: preliminary results." Journal of Electromagnetic Waves and Applications. 17 (6), pp. 901-918. https://doi.org/10.1163/156939303322503501
Thermal analysis of joining thermoplastic matrix composites using microwaves
Ku, Harry S., Lee, Kin Fung and Li, Chun Wai. 2003. "Thermal analysis of joining thermoplastic matrix composites using microwaves." Transactions, Hong Kong Institution of Engineers. 10 (1), pp. 14-20.
Lap shear strength comparison between different random glass fibre reinforced thermoplastic matrix composites bonded by adhesives using variable frequency microwaves (VFM) irradiation
Ku, Harry S., Siores, Elias, Ball, James A. R., Taube, Alex and Siu, Fred. 2003. "Lap shear strength comparison between different random glass fibre reinforced thermoplastic matrix composites bonded by adhesives using variable frequency microwaves (VFM) irradiation." Proceedings of the Institution of Mechanical Engineers Part L: Journal of Materials, Design and Applications. 217 (1), pp. 65-75.
Joining of thirty three percent by weight random carbon fibre reinforced low density polyethylene using variable frequency microwave
Ku, Harry S.. 2003. "Joining of thirty three percent by weight random carbon fibre reinforced low density polyethylene using variable frequency microwave ." Journal of The Institution of Engineers, Singapore. 43 (1), pp. 20-25.
Thermal analysis of joining Nylon 66 composites using microwave irradiations
Ku, Harry S., Widjaya, Budiman, Lee, Kin Fung and Li, Chun Wai. 2003. "Thermal analysis of joining Nylon 66 composites using microwave irradiations." Transactions of the Canadian Society for Mechanical Engineering. 27 (3), pp. 259-278.
Shrinkage reduction of thermoset matrix particle reinforced composites during curing using microwaves irradiation
Ku, Harry S. and Siores, Elias. 2004. "Shrinkage reduction of thermoset matrix particle reinforced composites during curing using microwaves irradiation." Transactions, Hong Kong Institution of Engineers. 11 (3), pp. 29-34.
Productivity improvement of composites processing through the use of industrial microwave technologies
Ku, Harry S.. 2006. "Productivity improvement of composites processing through the use of industrial microwave technologies." Progress in Electromagnetics Research (PIER). 66, pp. 267-285. https://doi.org/10.2528/PIER06111901
Young's modulus of vinyl ester composites cured by microwave irradiation: preliminary results
Ku, Harry S., Puttgunta, V. C. and Trada, Mohan. 2006. "Young's modulus of vinyl ester composites cured by microwave irradiation: preliminary results." Journal of Electromagnetic Waves and Applications. 20 (14), pp. 1911-1924. https://doi.org/10.1163/156939306779322675
Mechanical properties of vinyl ester composites cured by microwave irradiation: pilot study
Ku, H., Trada, M. and Puttgunta, V. C.. 2007. "Mechanical properties of vinyl ester composites cured by microwave irradiation: pilot study." Key Engineering Materials. 334-33, pp. 537-540. https://doi.org/10.4028/www.scientific.net/KEM.334-335.537
Yield and tensile strength of vinyl ester composites cured by microwaves
Ku, H., Trada, M., Puttgunta, V. C. and Kota, V.. 2007. "Yield and tensile strength of vinyl ester composites cured by microwaves ." Journal of Electromagnetic Waves and Applications. 21 (4), pp. 517-526. https://doi.org/10.1163/156939307780616847
Design of multi-purpose carbide end mill
Ku, Harry S. and Chia, Wee Chong. 2006. "Design of multi-purpose carbide end mill." Institution of Engineers, Malaysia. Journal. 67 (2), pp. 34-40.
Thermal analysis comparison between three random glass fibre-reinforced thermoplastic matrix composites bonded by adhesives using microwaves
Ku, Harry S., Widjaya, Budiman, Lee, Kin Fung and Li, Chun Wai. 2004. "Thermal analysis comparison between three random glass fibre-reinforced thermoplastic matrix composites bonded by adhesives using microwaves ." Journal of Reinforced Plastics and Composites. 23 (3), pp. 1443-1460.
Contrast joints of glass-fibre with carbon-fibre reinforced low density polyethylene composite bonded by microwave irradiation
Ku, Harry S.. 2005. "Contrast joints of glass-fibre with carbon-fibre reinforced low density polyethylene composite bonded by microwave irradiation." Journal of Reinforced Plastics and Composites. 24 (10), pp. 1035-1049. https://doi.org/10.1177/0731684405048203
Application of variable frequency microwave (VFM) to adhesives
Ku, Harry S., Siores, Elias and Ball, James A. R.. 2005. "Application of variable frequency microwave (VFM) to adhesives." Journal of Electromagnetic Waves and Applications. 19 (11), pp. 1467-1484.