ANALYSIS OF INTERNAL BONDED FIBRE REINFORCED COMPOSITE REPAIR SYSTEMS FOR CORRODED STEEL PIPELINES

Paper

C.S. Sirimanna, W. Karunasena, A.C. Manalo, S. Banerjee and L. McGarva. 2013. "ANALYSIS OF INTERNAL BONDED FIBRE REINFORCED COMPOSITE REPAIR SYSTEMS FOR CORRODED STEEL PIPELINES." Riadh Al-Mahaidi, Scott T. Smith, Yu Bai and Xiao-Ling Zhao (ed.) 4th Asia-Pacific Conference on FRP in Structures (APFIS 2013): Towards Sustainable Infrastructure with FRP Composites. Melbourne, Australia 11 - 13 Dec 2013
Paper/Presentation Title

ANALYSIS OF INTERNAL BONDED FIBRE REINFORCED COMPOSITE REPAIR SYSTEMS FOR CORRODED STEEL PIPELINES

Presentation TypePaper
AuthorsC.S. Sirimanna, W. Karunasena, A.C. Manalo, S. Banerjee and L. McGarva
EditorsRiadh Al-Mahaidi, Scott T. Smith, Yu Bai and Xiao-Ling Zhao
Journal or Proceedings TitleProceedings of the 4th Asia-Pacific Conference on FRP in Structures (APFIS 2013)
Year2013
Conference/Event4th Asia-Pacific Conference on FRP in Structures (APFIS 2013): Towards Sustainable Infrastructure with FRP Composites
Event Details
4th Asia-Pacific Conference on FRP in Structures (APFIS 2013): Towards Sustainable Infrastructure with FRP Composites
Event Date
11 to end of 13 Dec 2013
Event Location
Melbourne, Australia
Abstract

Steel pipelines are widely used in the oil and gas industry. Over time, many pipelines experience internal metal
loss, mainly due to corrosion, and some form of repair is required in order to reinstate the original operating
capacity and maintain structural integrity. Fibre reinforced composites offer solutions with broad applicability
and efficiency for internal repair of these pipelines. Analysing and understanding the behaviour of composites is
important in order for them to be used effectively as an internal repair system for corroded steel pipelines. This
paper presents the analyses of internal composite bonded repair systems for long steel pipes with an
axisymmetric defect, based on Lame’s equation. Optimum internal composite repair thicknesses using biaxial
carbon and glass fibre composites were determined for different levels of corrosion, following the Von Mises
yielding and Tsai-Hill failure criterion approaches. Design nomographs for internal composite repair systems
have been developed

KeywordsGFRP, CFRP, composite repair, failure index, thick cylinder
Contains Sensitive ContentDoes not contain sensitive content
ANZSRC Field of Research 2020400510. Structural engineering
Byline AffiliationsSchool of Engineering
Permalink -

https://research.usq.edu.au/item/zz38y/analysis-of-internal-bonded-fibre-reinforced-composite-repair-systems-for-corroded-steel-pipelines

Log in to edit
  • 0
    total views
  • 0
    total downloads
  • 0
    views this month
  • 0
    downloads this month

Export as

Related outputs

A Distributed Sensing- and Supervised Deep Learning-Based Novel Approach for Long-Term Structural Health Assessment of Reinforced Concrete Beams
Jayawickrema, M.; Herath, M.; Hettiarachchi, N.; Sooriyaarachchi, H.; Banerjee, S.; Epaarachchi, J.; Prusty, B.G.. 2025. "A Distributed Sensing- and Supervised Deep Learning-Based Novel Approach for Long-Term Structural Health Assessment of Reinforced Concrete Beams." Metrology. 5 (3). https://doi.org//10.3390/metrology5030040
Waste-based panels with cement grout as an infill material for composite railway sleepers
Abdullah, Mamun, Ferdous, Wahid, Banerjee, Sourish, Mohammed, Ali and Manalo, Allan. 2024. "Waste-based panels with cement grout as an infill material for composite railway sleepers." Results in Engineering. 24. https://doi.org/10.1016/j.rineng.2024.102924
Flexural Behaviour of Pultruded GFRP Profiles Filled with Layered Composite Panels for Railway Sleepers
Abdullah, Mamun, Ferdous, Wahid, Banerjee, Sourish and Manalo, Allan. 2024. "Flexural Behaviour of Pultruded GFRP Profiles Filled with Layered Composite Panels for Railway Sleepers." 26th Australasian Conference on the Mechanics of Structures and Materials (ACMSM 2023). Auckland, New Zealand 03 - 06 Dec 2023 Singapore. Springer. pp. 145-151 https://doi.org/10.1007/978-981-97-3397-2_14
A technical review of crystalline silicon photovoltaic module recycling
Sanathi, Radhesh, Banerjee, Sourish and Bhowmik, Shantanu. 2024. "A technical review of crystalline silicon photovoltaic module recycling." Solar Energy. 281. https://doi.org/10.1016/j.solener.2024.112869
On the vibrational behavior of the conventional and hetero-junction carbon nanotubes
Ghavamian, Ali, Banerjee, Sourish, Rahmandoust, Moones and Öchsner, Andreas. 2024. "On the vibrational behavior of the conventional and hetero-junction carbon nanotubes." Materials Today Communications. 39. https://doi.org/10.1016/j.mtcomm.2024.108656
Bond behaviour of smooth surface GFRP pultruded profiles with cement grout
Abdullah, Mamun, Ferdous, Wahid, Banerjee, Sourish and Manalo, Allan. 2024. "Bond behaviour of smooth surface GFRP pultruded profiles with cement grout." Case Studies in Construction Materials. 20. https://doi.org/10.1016/j.cscm.2024.e02891
Impact of Spectral Shift Quality (SSQ) on Fibre Optic Sensor Readings in Reinforced Concrete Beams
Udagedara, U. M. N., Herath, H. M. C. M., Henarachchi, N. K., Sooriyaarachchi, H. P., Banerjee, S. and Epaarachchi, J. A.. 2023. "Impact of Spectral Shift Quality (SSQ) on Fibre Optic Sensor Readings in Reinforced Concrete Beams." 14th International Workshop on Structural Health Monitoring. Stanford University, Stanford, CA 12 - 14 Sep 2023 United States. DEStech Publications, Inc.
An investigation of the use of embedded FBG sensors to measure temperature and strain inside a concrete beam during the curing period and strain measurements under operational loading
Fernando, C., Bernier, A., Banerjee, S., Kahandawa, G. and Eppaarchchi, J.. 2017. "An investigation of the use of embedded FBG sensors to measure temperature and strain inside a concrete beam during the curing period and strain measurements under operational loading." Chiu, Wing Kong, Galea, Steve, Mita, Akira and Takeda, Nobuo (ed.) 6th Asia Pacific Workshop on Structural Health Monitoring (APWSHM 2016). Hobart, Australia 07 - 09 Dec 2016 Netherlands. Elsevier. https://doi.org/10.1016/j.proeng.2017.04.500
An Investigation into the Use of Ultrasonic Wave Transmission Techniques to Evaluate Air Voids in Asphalt
Zargar, Majid, Banerjee, Sourish, Bullen, Frank and Ayers, Ron. 2018. "An Investigation into the Use of Ultrasonic Wave Transmission Techniques to Evaluate Air Voids in Asphalt." Pradhan, Biswajeet (ed.) 1st Global Civil Engineering Conference (GCEC 2017). Kuala Lumpur, Malaysia 26 - 28 Jul 2017 Singapore. https://doi.org/10.1007/978-981-10-8016-6_103
Fibre-reinforced polymer (FRP) repair systems for corroded steel pipelines
Sirimanna, C. S., Manalo, A. C., Karunasena, W., Banerjee, S. and McGarva, L.. 2015. "Fibre-reinforced polymer (FRP) repair systems for corroded steel pipelines." Karbhari, Vistasp M. (ed.) Rehabilitation of pipelines using fibre-reinforced polymer (FRP) composites. United Kingdom. Woodhead Publishing Limited. pp. 267-285
Challenges of teaching engineering analysis software to distance education students
Banerjee, Sourish, Karunasena, Warna and Kist, Alexander A.. 2016. "Challenges of teaching engineering analysis software to distance education students." Smith, Scott, Lim, Yee Yan, Bahadori, Alireza, Lake, Neal, Padilla, Ricardo Vasquez, Rose, Andrew and Doust, Ken (ed.) 27th Annual Conference of the Australasian Association for Engineering Education (AAEE 2016). Coffs Harbour, Australia 04 - 07 Dec 2016 Lismore, Australia.
Synthesis of graphene-based polymeric nanocomposites
Banerjee, S., Lee, J. H., Kuila, T. and Kim, N. H.. 2015. "Synthesis of graphene-based polymeric nanocomposites." Dong, Yu, Umer, Rehan and Lau, Alan Kin-Tak (ed.) Fillers and reinforcements for advancednanocomposites. United Kingdom. Woodhead Publishing Limited. pp. 133-155
Analysis of retrofitted corroded steel pipes using internally bonded FRP composite repair systems
Sirimanna, C. S., Banerjee, S., Karunasena, W., Manalo, A. C. and McGarva, L.. 2015. "Analysis of retrofitted corroded steel pipes using internally bonded FRP composite repair systems." Australian Journal of Structural Engineering. 16 (3), pp. 187-198. https://doi.org/10.1080/13287982.2015.1092681
On the mechanical properties of hierarchical lattices
Banerjee, Sourish. 2014. "On the mechanical properties of hierarchical lattices." Mechanics of Materials. 72, pp. 19-32. https://doi.org/10.1016/j.mechmat.2014.01.009
Modeling of heat transfer in rotational molding
Banerjee, S., Yan, W. and Bhattacharyya, D.. 2008. "Modeling of heat transfer in rotational molding." Polymer Engineering and Science. 48 (11), pp. 2188-2197. https://doi.org/10.1002/pen.21164
Creep response of polymeric honeycombs
Banerjee, Sourish. 2011. "Creep response of polymeric honeycombs." Bhattacharyya, D., Lin, R. J. T. and Srivatsan, T. S. (ed.) 19th International Symposium on Processing and Fabrication of Advanced Materials (PFAM XIX). Auckland, New Zealand 14 - 17 Jan 2011 Auckland, New Zealand.
Compressive behavior of fibre reinforced honeycomb cores
Rao, Sanjeev, Banerjee, Sourish, Jayaraman, Krishnan and Bhattacharyya, Debes. 2010. "Compressive behavior of fibre reinforced honeycomb cores." Dattaguru, B., Gopalakrishnan, S. and Aatre, K. (ed.) 2008 IUTAM Symposium on Multi-Functional Material Structures and Systems. Bangalore, India 10 - 12 Dec 2008 United States. https://doi.org/10.1007/978-90-481-3771-8_22
Shear strength optimization of reinforced honeycomb core materials
Banerjee, S., Battley, M. and Bhattacharyya, D.. 2010. "Shear strength optimization of reinforced honeycomb core materials." Mechanics of Advanced Materials and Structures. 17 (7), pp. 542-552. https://doi.org/10.1080/15376490903398714
Optimal design of sandwich panels made of wood veneer hollow cores
Banerjee, S. and Bhattacharyya, D.. 2011. "Optimal design of sandwich panels made of wood veneer hollow cores." Composites Science and Technology. 71 (4), pp. 425-432. https://doi.org/10.1016/j.compscitech.2010.12.011
The applicability of the effective medium theory to the dynamics of cellular beams
Banerjee, Sourish and Bhaskar, Atul. 2009. "The applicability of the effective medium theory to the dynamics of cellular beams." International Journal of Mechanical Sciences. 51 (8), pp. 598-608. https://doi.org/10.1016/j.ijmecsci.2009.06.001
On the degree of crystallinity from DSC in the case of multiple melting of synthetic polymers
Fakirov, S., Banerjee S. and Lin, R. J. T.. 2007. "On the degree of crystallinity from DSC in the case of multiple melting of synthetic polymers." Journal of Macromolecular Science Part B: Physics. 46 (2), pp. 317-320. https://doi.org/10.1080/00222340601067103
The use and limitations of continuum modes for response calculations of cellular structures
Banerjee, Sourish and Bhaskar, Atul. 2007. "The use and limitations of continuum modes for response calculations of cellular structures." Journal of Sound and Vibration. 302 (3), pp. 457-470. https://doi.org/10.1016/j.jsv.2006.09.032
Free vibration of cellular structures using continuum modes
Banerjee Sourish and Bhaskar, Atul. 2005. "Free vibration of cellular structures using continuum modes." Journal of Sound and Vibration. 287 (1-2), pp. 77-100. https://doi.org/10.1016/j.jsv.2004.10.051
Vibration of beams made up of cellular material
Banerjee, Sourish and Bhaskar, Atul. 2003. "Vibration of beams made up of cellular material." Cartmell, M. (ed.) 5th International Conference on Modern Practice in Stress and Vibration Analysis. Glasgow, Scotland 09 - 11 Sep 2003 Switzerland. Scientific.Net. https://doi.org/10.4028/www.scientific.net/msf.440-441.337