4017. Mechanical engineering
| Title | 4017. Mechanical engineering |
|---|---|
| Parent | 40. Engineering |
Latest research outputs
Sort by Date Title
Mixture fraction probability density functions in sparse spray flames with spark ignition
Wandel, Andrew P.. 2013. "Mixture fraction probability density functions in sparse spray flames with spark ignition." Zhu, Mingming, Ma, Yu, Yu, Yun, Vuthaluru, Hari, Zhang, Zhezi and Zhang, Dongke (ed.) 7th Australian Combustion Symposium (ACS 2013). Perth, Australia 06 - 08 Nov 2013 Perth, Australia.Paper
Numerical prediction of the performance of horizontal sand filters as the pitch of the spiral protrusion changes
Mossad, Ruth and Aral, Hal. 2013. "Numerical prediction of the performance of horizontal sand filters as the pitch of the spiral protrusion changes." Water Science and Technology. 67 (10), pp. 2249-2256. https://doi.org/10.2166/wst.2013.112Article
Geometry and restraint effects on the bending behaviour of the glass fibre reinforced polymer sandwich slabs under point load
Awad, Ziad K., Aravinthan, Thiru, Zhuge, Yan and Manalo, Allan. 2013. "Geometry and restraint effects on the bending behaviour of the glass fibre reinforced polymer sandwich slabs under point load." Materials and Design. 45, pp. 125-134. https://doi.org/10.1016/j.matdes.2012.08.072Article
Reducing the mass of the refrigerant in the capillary tube of a propane air-conditioner
Tangalajuk Siang, Jeri and Sharifian, Ahmad. 2013. "Reducing the mass of the refrigerant in the capillary tube of a propane air-conditioner." Ngoc Hai, Duong (ed.) 14th Asian Congress of Fluid Mechanics (14 ACFM). Hanoi, Vietnam 15 - 19 Oct 2013 Hanoi, Vietnam.Paper
Fuzzy logic based model to predict maximum oil-film pressure in journal bearing
Ahmed, Diyar I., Kasolang, S., Khidhir, Basim A. and Yousif, B. F.. 2013. "Fuzzy logic based model to predict maximum oil-film pressure in journal bearing." Research Journal of Applied Sciences, Engineering and Technology. 6 (20), pp. 3871-3878.Article
A Markov chain Monte Carlo technique based optimal mix design of porous concrete
Jin, Lu and Zhuge, Yan. 2013. "A Markov chain Monte Carlo technique based optimal mix design of porous concrete." Applied Mechanics and Materials. 357-360, pp. 959-962. https://doi.org/10.4028/www.scientific.net/AMM.357-360.959Article
Applying bi-directional evolutionary structural optimisation method for tunnel reinforcement design considering nonlinear material behaviour
Nguyen, T., Ghabraie, K. and Tran-Cong, T.. 2014. "Applying bi-directional evolutionary structural optimisation method for tunnel reinforcement design considering nonlinear material behaviour." Computers and Geotechnics. 55, pp. 57-66. https://doi.org/10.1016/j.compgeo.2013.07.015Article
Development of artificial neural network model in predicting performance of the smart wind turbine blade
Supeni, E. E., Epaarachchi, J. A., Islam, M. M. and Lau, K. T.. 2013. "Development of artificial neural network model in predicting performance of the smart wind turbine blade." 3rd Malaysian Postgraduate Conference (MPC 2013). Sydney, Australia 04 - 05 Jul 2013 Sydney, Australia.Paper
The air fuel ratio study for the mixture of biogas and hydrogen on mild combustion
Noor, M. M., Wandel, Andrew P. and Yusaf, Talal. 2013. "The air fuel ratio study for the mixture of biogas and hydrogen on mild combustion." 3rd Malaysian Postgraduate Conference (MPC 2013). Sydney, Australia 04 - 05 Jul 2013 Sydney, Australia.Paper
A homogeneous charge compression ignition engine: an introduction
Hairuddin, A. Aziz, Wandel, Andrew P. and Yusaf, Talal. 2013. "A homogeneous charge compression ignition engine: an introduction." 3rd Malaysian Postgraduate Conference (MPC 2013). Sydney, Australia 04 - 05 Jul 2013 Sydney, Australia.Paper
A review on tribological behaviour of polymeric composites and future reinforcements
Aldousiri, B., Shalwan, A. and Chin, C. W.. 2013. "A review on tribological behaviour of polymeric composites and future reinforcements." Advances in Materials Science and Engineering. 2013, pp. 1-8. https://doi.org/10.1155/2013/645923Article
Optimal strut-and-tie models in structural concrete members
Liang, Q. Q., Xie, Y. M. and Steven, G. P.. 1999. "Optimal strut-and-tie models in structural concrete members." Topping, B. H. V. and Kumar, B. (ed.) 7th International Conference on Civil and Structural Engineering: Optimization and Control in Civil and Structural Engineering. Oxford, United Kingdom 13 - 15 Sep 1999 Edinburgh, Scotland.Paper
Damage modelling of repeatedly impacted square fibre reinforced polymer composite tube
Guades, Ernesto, Aravinthan, Thiru, Manalo, Allan and Islam, Mainul. 2013. "Damage modelling of repeatedly impacted square fibre reinforced polymer composite tube." Materials and Design. 47, pp. 687-697. https://doi.org/10.1016/j.matdes.2012.12.051Article
Interfuel substitution in Australia: a way forward to achieve environmental sustainability
Shahiduzzaman, MD and Alam, Khorshed. 2014. "Interfuel substitution in Australia: a way forward to achieve environmental sustainability." The Australian Journal of Agricultural and Resource Economics. 58 (1), pp. 22-42. https://doi.org/10.1111/1467-8489.12017Article
The effect of direction of low speed winds on the performance of a split chimney
Sharifian, Ahmad. 2012. "The effect of direction of low speed winds on the performance of a split chimney ." Bai, Yilong, Wang, Jinaxiang and Fang, Daining (ed.) 23rd International Congress of Theoretical and Applied Mechanics (ICTAM 2012). Beijing, China Beijing, China.Paper
The potential of wind and solar energy in Malaysia east coast: preliminary study at Universiti Malaysia Pahang (UMP)
Amirruddin, A. K., Noor, M. M., Kadirgama, K. and Sharma, K. V.. 2012. "The potential of wind and solar energy in Malaysia east coast: preliminary study at Universiti Malaysia Pahang (UMP) ." Brebbia, C. A. and Zubir, S. S. (ed.) 3rd International Conference on Management of Natural Resources, Sustainable Development and Ecological Hazards: Ravage of the Planet III (RAV 2011) . Selangor, Malaysia 13 - 15 Dec 2011 Southampton, UK .Paper
Adhesive wear characteristics of natural fiber-reinforced composites
Yousif, Belal F.. 2012. "Adhesive wear characteristics of natural fiber-reinforced composites." Davim, J. Paulo (ed.) Wear of advanced materials. London, United Kingdom. John Wiley & Sons. pp. 61-97Edited book (chapter)
Mechanical properties of palm fibre reinforced recycled HDPE
Aldousiri, B., Alajmi, M. and Shalwan, A.. 2013. "Mechanical properties of palm fibre reinforced recycled HDPE ." Advances in Materials Science and Engineering. 2013, pp. 1-7. https://doi.org/10.1155/2013/508179Article
RBF computation of multiscale elliptic problems [Keynote paper]
An-Vo, D.-A., Tran, C.-D., Mai-Duy, N. and Tran-Cong, T.. 2012. "RBF computation of multiscale elliptic problems [Keynote paper]." Atluri, S. N., Vusanovic, I. and Sarler, B. (ed.) 8th ICCES Special Symposium on Meshless & Other Novel Computational Methods (ICCES MM 2012). Budva, Montenegro 02 - 06 Sep 2012 Montenegro.Presentation
Non-velocity based analysis of passive ultrasonic signal for source location detection in composite plates: a pilot study
Hafizi, Z. M., Epaarachchi, J., Nizwan, C. K. E. and Lau, K. T.. 2012. "Non-velocity based analysis of passive ultrasonic signal for source location detection in composite plates: a pilot study." 1st International Conference of Mechanical Engineering Research (ICMER 2011). Kuantan, Malaysia 05 - 07 Dec 2011 Bristol, United Kingdom . IOP Publishing. https://doi.org/10.1088/1757-899X/36/1/012008Paper
Numerical simulation of porosity on thermal properties and fire resistance of foamed concrete
Li, Qiang, Wang, Hao, Zhang, Zuhua and Reid, Andrew. 2013. "Numerical simulation of porosity on thermal properties and fire resistance of foamed concrete." Journal of Sustainable Cement-Based Materials. 2 (1), pp. 13-19. https://doi.org/10.1080/21650373.2012.755748Article
Modal acoustic emission investigation for progressive failure monitoring in thin composite plates under tensile test
Hafizi, Mohd Zohari, Epaarachchi, Jayantha Ananda and Lau, K. T.. 2013. "Modal acoustic emission investigation for progressive failure monitoring in thin composite plates under tensile test." Key Engineering Materials. 558 (558), pp. 65-75. https://doi.org/10.4028/www.scientific.net/KEM.558.65Article
Reducing the mechanical hysteresis problem in optically-addressed diaphragm pressure sensors
Sharifian, S. A. and Buttsworth, D. R.. 2002. "Reducing the mechanical hysteresis problem in optically-addressed diaphragm pressure sensors." Tomasini, Enrico (ed.) SPIE 2002: Vibration Measurements by Laser Techniques: Advances and Applications. Ancona, Italy 18 - 21 Jun 2002 Washington, USA. https://doi.org/10.1117/12.468141Paper
Mechanical property and structure of alkali-activated fly ash and slag blends
Yang, Tao, Yao, Xiao, Zhang, Zuhua and Wang, Hao. 2012. "Mechanical property and structure of alkali-activated fly ash and slag blends." Journal of Sustainable Cement-Based Materials. 1 (4), pp. 167-178. https://doi.org/10.1080/21650373.2012.752621Article
Shakedown analysis of layered continuum
Shiau, Jim. 2013. "Shakedown analysis of layered continuum." Vimonsatit, Vanissorn, Singh, Amarjit and Yazdani, Siamak (ed.) 1st Australasia and South East Asia Conference in Structural Engineering and Construction (ASEA-SEC-1). Perth, Australia 28 Nov - 02 Dec 2012 Singapore. https://doi.org/10.3850/978-981-08-7920-4_St-100-0307Paper
Extinction predictors in turbulent sprays
Wandel, Andrew P.. 2013. "Extinction predictors in turbulent sprays." Proceedings of the Combustion Institute. 34 (1), pp. 1625-1632. https://doi.org/10.1016/j.proci.2012.07.037Article
Hybrid multiple mapping conditioning modeling of local extinction
Wandel, Andrew P. and Lindstedt, R. Peter. 2013. "Hybrid multiple mapping conditioning modeling of local extinction." Proceedings of the Combustion Institute. 34 (1), pp. 1365-1372. https://doi.org/10.1016/j.proci.2012.07.073Article
Mechanical behaviour of a new type of fibre composite railway sleeper
Manalo, Allan C. and Aravinthan, Thiru. 2012. "Mechanical behaviour of a new type of fibre composite railway sleeper." Ueda, Tamon (ed.) 3rd Asia-Pacific Conference on FRP in Structures (APFIS 2012). Sapporo, Japan 02 - 04 Feb 2012 Hokkaido, Japan.Paper
Modelling of tensile properties glass powder/epoxy composites post-cured in an oven and in microwaves
Ku, H., Epaarachchi, J., Trada, M. and Wong, P.. 2013. "Modelling of tensile properties glass powder/epoxy composites post-cured in an oven and in microwaves ." Journal of Reinforced Plastics and Composites. 32 (10), pp. 689-699. https://doi.org/10.1177/0731684412475333Article
Tensile properties of bagasse reinforced epoxy composites
Trada, M., Mandava, J., Ku, H. and Yousif, B.. 2012. "Tensile properties of bagasse reinforced epoxy composites." Jaafar, M., Azura, A. R., Leong, K. H. and Leong, A. Y. L. (ed.) 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today. Kuala Lumpur, Malaysia 06 - 08 Nov 2012 Kowloon, Hong Kong.Paper
A review of aerogels and their application as a multi-functional building material
Zhuge, Yan. 2013. "A review of aerogels and their application as a multi-functional building material." Applied Mechanics and Materials. 253-255, pp. 564-567. https://doi.org/10.4028/www.scientific.net/AMM.253-255.564Article
Develop and validate a biomechanical surrogate of the human thorax using corrugated sheets: a feasibility study
Thota, Narasimha Murthy, Eepaarachchi, Jayantha A. and Lau, K. T.. 2012. "Develop and validate a biomechanical surrogate of the human thorax using corrugated sheets: a feasibility study." 7th Australasian Congress on Applied Mechanics (ACAM 2012). Adelaide, Australia 09 - 12 Dec 2012 Canberra, Australia.Paper
Tribological consideration in roller mill machines for agriculture applications
Al-Sandooq, J. M., Yousif, B. F. and Jensen, T. A.. 2012. "Tribological consideration in roller mill machines for agriculture applications." Surface Review and Letters. 19 (6), pp. 1250065-1. https://doi.org/10.1142/S0218625X12500655Article
Computation of a Fokker-Planck-equation-based multi-scale model for complex flows using the IRBFN method
Tran, Canh-Dung, Mai-Duy, Nam and Tran-Cong, Thanh. 2012. "Computation of a Fokker-Planck-equation-based multi-scale model for complex flows using the IRBFN method." Eberhardsteiner, J., Böhm, H. J. and Rammerstorfer, F. G. (ed.) 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012). Vienna, Austria Vienna, Austria.Paper
Investigating two configurations of a heat exchanger in an Indirect Heating Integrated Collector Storage Solar Water Heating System (IHICSSWHS)
Mossad, R. and AL-Khaffajy, M.. 2012. "Investigating two configurations of a heat exchanger in an Indirect Heating Integrated Collector Storage Solar Water Heating System (IHICSSWHS)." Donsion, Manuel and Aguera, Angeles (ed.) International Conference on Renewable Energies and Power Quality (ICREPQ12). Santiago de Compostela, Spain 28 - 30 Mar 2012 Spain.Paper
Modeling strain localisation in a segmented bar by a C2-continuous two-node integrated-RBF element formulation
An-Vo, D.-A., Mai-Duy, N., Tran, C.-D. and Tran-Cong, T.. 2012. "Modeling strain localisation in a segmented bar by a C2-continuous two-node integrated-RBF element formulation." Brebbia, C. A. and Poljak, D. (ed.) 34th International Conference on Boundary Elements and other Mesh Reduction Methods (BEM/MRM 2012). Split, Croatia 25 - 27 Jun 2012 United Kingdom. https://doi.org/10.2495/BE120011Paper
Predicting the flow stress behavior of Ni-42.5Ti-3Cu during hot deformation using constitutive equations
Etaati, Amir, Dehghani, Kamran, Ebrahimi, G. R. and Wang, Hao. 2013. "Predicting the flow stress behavior of Ni-42.5Ti-3Cu during hot deformation using constitutive equations." Metals and Materials International. 19 (1), pp. 5-9. https://doi.org/10.1007/s12540-013-1002-9Article
Numerical study of nonlinear wave processes by means of discrete chain models
Obregon, M., Raj, N. and Stepanyants, Y.. 2012. "Numerical study of nonlinear wave processes by means of discrete chain models." Gu, Y. T. and Saha, Suvash C. (ed.) 4th International Conference on Computational Methods (ICCM 2012). Gold Coast, Australia 25 - 28 Nov 2012 Brisbane, Australia.Paper
A new IRBFN scheme for the numerical simulation of interfacial flows
Mai-Cao, L. and Tran-Cong, T.. 2012. "A new IRBFN scheme for the numerical simulation of interfacial flows." Gu, Y. T. and Saha, Suvash C. (ed.) 4th International Conference on Computational Methods (ICCM 2012). Gold Coast, Australia 25 - 28 Nov 2012 Brisbane, Australia.Paper
Compact local integrated RBF stencil based on finite volume formulation for second-order differential problems
Hoang-Trieu, T.-T., Mai-Duy, N., Tran, C.-D. and Tran-Cong, T.. 2012. "Compact local integrated RBF stencil based on finite volume formulation for second-order differential problems." Gu, Y. T. and Saha, Suvash C. (ed.) 4th International Conference on Computational Methods (ICCM 2012). Gold Coast, Australia 25 - 28 Nov 2012 Brisbane, Australia.Paper
Navigation
401701. Acoustics and noise control (excl. architectural acoustics)
401702. Dynamics, vibration and vibration control
401703. Energy generation, conversion and storage (excl. chemical and electrical)
401704. Mechanical engineering asset management
401705. Microelectromechanical systems (MEMS)