Centre for Future Materials (Research)
University | Centre for Future Materials |
---|---|
Head | Prof Allan Manalo |
Director of Research | Prof Allan Manalo |
Latest research outputs
767 results found
Sort by Date Title
Screw lateral restraint behaviour of timber and polymeric based railway sleepers
Yu, Peng, Manalo, Allan, Ferdous, Wahid, Salih, Choman, Heyer, Tom and Schubel, Peter. 2022. "Screw lateral restraint behaviour of timber and polymeric based railway sleepers." Engineering Failure Analysis. 139, pp. 1-18. https://doi.org/10.1016/j.engfailanal.2022.106514Article
A Probability Distribution Model for the Degree of Bending In Tubular KT-Joints of Offshore Jacket-Type Platforms Subjected To IPB Moment Loadings
Ahmadi, Hamid, Mayeli, Vahid and Zavvar, Esmaeil. 2019. "A Probability Distribution Model for the Degree of Bending In Tubular KT-Joints of Offshore Jacket-Type Platforms Subjected To IPB Moment Loadings." International Journal of Coastal and Offshore Engineering. 3 (2), pp. 11-29. https://doi.org/10.29252/IJCOE.3.2.11Article
Structural behavior of right-angle two-planar tubular TT-joints subjected to axial loadings at fire-induced elevated temperatures
Azari-Dodaran, Neda and Ahmadi, Hamid. 2019. "Structural behavior of right-angle two-planar tubular TT-joints subjected to axial loadings at fire-induced elevated temperatures." Fire Safety Journal. 108, pp. 1-15. https://doi.org/10.1016/j.firesaf.2019.102849Article
Static behavior of offshore two-planar tubular KT-joints under axial loading at fire-induced elevated temperatures
Azari-Dodaran, Neda and Ahmadi, Hamid. 2019. "Static behavior of offshore two-planar tubular KT-joints under axial loading at fire-induced elevated temperatures." Journal of Ocean Engineering and Science. 4 (4), pp. 352-372. https://doi.org/10.1016/j.joes.2019.05.009Article
Effects of geometrical parameters on the degree of bending (DoB) in two-planar tubular DT-joints of offshore jacket structures subjected to axial and bending loads
Ahmadi, Hamid and Niaki, Masoud Amini. 2019. "Effects of geometrical parameters on the degree of bending (DoB) in two-planar tubular DT-joints of offshore jacket structures subjected to axial and bending loads." Marine Structures. 64, pp. 229-245. https://doi.org/10.1016/j.marstruc.2018.11.008Article
Development of a probability distribution model for the LJF factors in offshore two-planar tubular DK-joints subjected to OPB moment loading
Ahmadi, Hamid and Mayeli, Vahid. 2019. "Development of a probability distribution model for the LJF factors in offshore two-planar tubular DK-joints subjected to OPB moment loading." Marine Structures. 63, pp. 196-214. https://doi.org/10.1016/j.marstruc.2018.09.009Article
Static strength of axially loaded tubular KT-joints at elevated temperatures: Study of geometrical effects and parametric formulation
Dodaran, Neda Azari, Ahmadi, Hamid and Lotfollahi-Yaghin, Mohammad Ali. 2018. "Static strength of axially loaded tubular KT-joints at elevated temperatures: Study of geometrical effects and parametric formulation." Marine Structures. 61, pp. 282-308. https://doi.org/10.1016/j.marstruc.2018.06.009Article
Development of a Probability Distribution Model for SCFs in Uniplanar Tubular KT-Joints of Offshore Structures under IPB Moment Loading
Ahmadi, Hamid and Benam, Mir Amin Mousavi Nezhad. 2017. "Development of a Probability Distribution Model for SCFs in Uniplanar Tubular KT-Joints of Offshore Structures under IPB Moment Loading." International Journal of Coastal and Offshore Engineering. 1 (3), pp. 1-18.Article
A numerical study on the ultimate load of offshore two-planar tubular TT-joints reinforced with internal ring stiffeners at fire-induced elevated temperatures
Azari-Dodaran, Neda and Ahmadi, Hamid. 2021. "A numerical study on the ultimate load of offshore two-planar tubular TT-joints reinforced with internal ring stiffeners at fire-induced elevated temperatures." Ocean Engineering. 230, pp. 1-15. https://doi.org/10.1016/j.oceaneng.2021.108797Article
Stress concentration factors in FRP-strengthened steel tubular KT-joints
Hosseini, Alireza Sadat, Zavvar, Esmaeil and Ahmadi, Hamid. 2021. "Stress concentration factors in FRP-strengthened steel tubular KT-joints." Applied Ocean Research. 108, pp. 1-24. https://doi.org/10.1016/j.apor.2021.102525Article
Effects of geometrical parameters on the degree of bending (DoB) in multiplanar tubular XT-joints of offshore structures subjected to axial loading
Ahmadi, Hamid, Chamani, Shadi and Kouhi, Ahmad. 2020. "Effects of geometrical parameters on the degree of bending (DoB) in multiplanar tubular XT-joints of offshore structures subjected to axial loading." Applied Ocean Research. 104. https://doi.org/10.1016/j.apor.2020.102381Article
Stress concentration factors of multi-planar tubular XT-joints subjected to out-of-plane bending moments
Ahmadi, Hamid and Kouhi, Ahmad. 2020. "Stress concentration factors of multi-planar tubular XT-joints subjected to out-of-plane bending moments." Applied Ocean Research. 96, pp. 1-11. https://doi.org/10.1016/j.apor.2020.102058Article
Degree of bending (DoB) in offshore tubular KT-joints under the axial, in-plane bending (IPB), and out-of-plane bending (OPB) loads
Ahmadi, Hamid and Zavvar, Esmaeil. 2020. "Degree of bending (DoB) in offshore tubular KT-joints under the axial, in-plane bending (IPB), and out-of-plane bending (OPB) loads." Applied Ocean Research. 95, pp. 1-19. https://doi.org/10.1016/j.apor.2019.102015Article
Local buckling analysis of cold-formed steel webs with stiffened rectangular openings
Osgouei, Amir Jameei, Hosseinzadeh, Yousef and Ahmadi, Hamid. 2020. "Local buckling analysis of cold-formed steel webs with stiffened rectangular openings." Journal of Constructional Steel Research. 167, pp. 1-16. https://doi.org/10.1016/j.jcsr.2019.105824Article
Probabilistic analysis of the DoB in axially-loaded tubular KT-joints of offshore structures
Ahmadi, Hamid. 2019. "Probabilistic analysis of the DoB in axially-loaded tubular KT-joints of offshore structures." Applied Ocean Research. 87, pp. 64-80. https://doi.org/10.1016/j.apor.2019.03.018Article
Parametric study on structural behavior of tubular K-joints under axial loading at fire-induced elevated temperatures
Dodaran, Neda Azari, Ahmadi, Hamid and Lotfollahi-Yaghin, Mohammad Ali. 2018. "Parametric study on structural behavior of tubular K-joints under axial loading at fire-induced elevated temperatures." Thin-Walled Structures. 130, pp. 467-486. https://doi.org/10.1016/j.tws.2018.06.014Article
Probabilistic analysis of the local joint flexibility in two-planar tubular DK-joints of offshore jacket structures under in-plane bending loads
Ahmadi, Hamid and Mayeli, Vahid. 2018. "Probabilistic analysis of the local joint flexibility in two-planar tubular DK-joints of offshore jacket structures under in-plane bending loads." Applied Ocean Research. 81, pp. 126-140. https://doi.org/10.1016/j.apor.2018.10.011Article
Static capacity of tubular X-joints reinforced with collar plate subjected to brace compression
Nassiraei, Hossein, Zhu, Lie, Lotfollahi-Yaghin, Mohammad Ali and Ahmadi, Hamid. 2017. "Static capacity of tubular X-joints reinforced with collar plate subjected to brace compression." Thin-Walled Structures. 119, pp. 256-265. https://doi.org/10.1016/j.tws.2017.06.012Article
Static strength of doubler plate reinforced tubular T/Y-joints under in-plane bending load
Nassiraei, Hossein, Lotfollahi-Yaghin, Mohammad Ali, Ahmadi, Hamid and Zhu, Lie. 2017. "Static strength of doubler plate reinforced tubular T/Y-joints under in-plane bending load." Journal of Constructional Steel Research. 136, pp. 49-64. https://doi.org/10.1016/j.jcsr.2017.05.009Article
Local joint flexibility of two-planar tubular DK-joints in OWTs subjected to axial loading: Parametric study of geometrical effects and design formulation
Ahmadi, Hamid and Nejad, Ali Ziaei. 2017. "Local joint flexibility of two-planar tubular DK-joints in OWTs subjected to axial loading: Parametric study of geometrical effects and design formulation." Ocean Engineering. 136, pp. 1-10. https://doi.org/10.1016/j.oceaneng.2017.03.011Article
A study on the Local Joint Flexibility (LJF) of two-planar tubular DK-joints in jacket structures under in-plane bending loads
Ahmadi, Hamid and Nejad, Ali Ziaei. 2017. "A study on the Local Joint Flexibility (LJF) of two-planar tubular DK-joints in jacket structures under in-plane bending loads." Applied Ocean Research. 64, pp. 1-14. https://doi.org/10.1016/j.apor.2017.02.002Article
Geometrical effects on the local joint flexibility of two-planar tubular DK-joints in jacket substructure of offshore wind turbines under OPB loading
Ahmadi, Hamid and Nejad, Ali Ziaei. 2017. "Geometrical effects on the local joint flexibility of two-planar tubular DK-joints in jacket substructure of offshore wind turbines under OPB loading." Thin-Walled Structures. 114 (5), pp. 122-133. https://doi.org/10.1016/j.tws.2017.02.001Article
Investigation on the Effect of Geometrical and Geotechnical Parameters on Elongated Offshore Piles Using Fuzzy Inference Systems
Aminfar, Ali, Mojtahedi, Alireza, Ahmadi, Hamid and Aminfar, Mohammad Hossein. 2017. "Investigation on the Effect of Geometrical and Geotechnical Parameters on Elongated Offshore Piles Using Fuzzy Inference Systems." China Ocean Engineering. 31 (3), pp. 378-388. https://doi.org/10.1007/s13344-017-0044-zArticle
Probabilistic analysis of stress concentration factors in unstiffened gap tubular KT-joints of jacket structures under the out-of-plane bending moment loads
Ahmadi, Hamid and Benam, Mir Amin Mousavi Nezhad. 2017. "Probabilistic analysis of stress concentration factors in unstiffened gap tubular KT-joints of jacket structures under the out-of-plane bending moment loads." Advances in Structural Engineering: an international journal. 20 (4), pp. 595-615. https://doi.org/10.1177/1369433216658487Article
Seismic responses of an offshore jacket-type platform incorporated with tuned liquid dampers
Lotfollahi-Yaghin, Mohammad Ali, Ahmadi, Hamid and Tafakhor, Hassan. 2016. "Seismic responses of an offshore jacket-type platform incorporated with tuned liquid dampers." Advances in Structural Engineering: an international journal. 19 (2), pp. 227-238. https://doi.org/10.1177/1369433215624340Article
Cyclic Behavior of Cold-Formed Steel Frames with Strap Bracing
Hosseinzadeh, Y., Moslehifar, A. and Ahmadi, H.. 2017. "Cyclic Behavior of Cold-Formed Steel Frames with Strap Bracing." Asian Journal of Civil Engineering. 18 (2), pp. 150-161.Article
Static performance of doubler plate reinforced tubular T/Y-joints subjected to brace tension
Nassiraei, Hossein, Lotfollahi-Yaghin, Mohammad Ali and Ahmadi, Hamid. 2016. "Static performance of doubler plate reinforced tubular T/Y-joints subjected to brace tension." Thin-Walled Structures. 108, pp. 138-152. https://doi.org/10.1016/j.tws.2016.08.012Article
Stress concentration factors in uniplanar tubular KT-joints of jacket structures subjected to in-plane bending loads
Ahmadi, Hamid and Nejad, Ali Ziyaei. 2016. "Stress concentration factors in uniplanar tubular KT-joints of jacket structures subjected to in-plane bending loads." International Journal of Maritime Technology. 5, pp. 27-39.Article
Static strength of doubler plate reinforced tubular T/Y-joints subjected to brace compressive loading: Study of geometrical effects and parametric formulation
Nassiraei, Hossein, Lotfollahi-Yaghin, Mohammad Ali and Ahmadi, Hamid. 2016. "Static strength of doubler plate reinforced tubular T/Y-joints subjected to brace compressive loading: Study of geometrical effects and parametric formulation." Thin-Walled Structures. 107, pp. 231-247. https://doi.org/10.1016/j.tws.2016.06.009Article
Structural behavior of tubular T/Y-joints with collar plate under static in-plane bending
Nassiraei, Hossein, Lotfollahi-Yaghin, Mohammad Ali and Ahmadi, Hamid. 2016. "Structural behavior of tubular T/Y-joints with collar plate under static in-plane bending." Journal of Constructional Steel Research. 123, pp. 121-134. https://doi.org/10.1016/j.jcsr.2016.04.029Article
The effect of multi-planarity on the SCFs in offshore tubular KT-joints subjected to in-plane and out-of-plane bending loads
Ahmadi, Hamid and Zavvar, Esmaeil. 2016. "The effect of multi-planarity on the SCFs in offshore tubular KT-joints subjected to in-plane and out-of-plane bending loads." Thin-Walled Structures. 106, pp. 148-165. https://doi.org/10.1016/j.tws.2016.04.020Article
Parametric study of geometrical effects on the degree of bending (DoB) in offshore tubular K-joints under out-of-plane bending loads
Ahmadi, Hamid and Asoodeh, Shadi. 2016. "Parametric study of geometrical effects on the degree of bending (DoB) in offshore tubular K-joints under out-of-plane bending loads." Applied Ocean Research. 58, pp. 1-10. https://doi.org/10.1016/j.apor.2016.03.004Article
A probability distribution model for SCFs in internally ring-stiffened tubular KT-joints of offshore structures subjected to out-of-plane bending loads
Ahmadi, Hamid. 2016. "A probability distribution model for SCFs in internally ring-stiffened tubular KT-joints of offshore structures subjected to out-of-plane bending loads." Ocean Engineering. 116, pp. 184-199. https://doi.org/10.1016/j.oceaneng.2016.02.037Article
Static strength of offshore tubular T/Y-joints reinforced with collar plate subjected to tensile brace loading
Nassiraei, Hossein, Lotfollahi-Yaghin, Mohammad Ali and Ahmadi, Hamid. 2016. "Static strength of offshore tubular T/Y-joints reinforced with collar plate subjected to tensile brace loading." Thin-Walled Structures. 103, pp. 141-156. https://doi.org/10.1016/j.tws.2016.02.010Article
Parametric Study on the Effects of Pile Inclination Angle on the Response of Batter Piles in Offshore Jacket Platforms
Aminfar, Ali, Ahmadi, Hamid and Aminfar, Mohammad Hossein. 2016. "Parametric Study on the Effects of Pile Inclination Angle on the Response of Batter Piles in Offshore Jacket Platforms." Journal of Marine Science and Application. 15, pp. 193-200. https://doi.org/10.1007/s11804-016-1355-9Article
Static strength of collar plate reinforced tubular T/Y-joints under brace compressive loading
Nassiraei, Hossein, Lotfollahi-Yaghin, Mohammad Ali and Ahmadi, Hamid. 2016. "Static strength of collar plate reinforced tubular T/Y-joints under brace compressive loading." Journal of Constructional Steel Research. 119, pp. 39-49. https://doi.org/10.1016/j.jcsr.2015.12.011Article
Probabilistic analysis of stress concentration factors in tubular KT-joints reinforced with internal ring stiffeners under in-plane bending loads
Ahmadi, Hamid, Yeganeh, Ali, Mohammadi, Amir Hossain and Zavvar, Esmaeil. 2016. "Probabilistic analysis of stress concentration factors in tubular KT-joints reinforced with internal ring stiffeners under in-plane bending loads." Thin-Walled Structures. 99, pp. 58-75. https://doi.org/10.1016/j.tws.2015.11.010Article
Comparing the geodetical and geotechnical methods in investigating the deformation of earthfill dams; A case study of Mahabad Earthfill Dam, Iran
Aminfar, M. H., Rastbud, A., Ahmadi, H. and Naseri, A.. 2016. "Comparing the geodetical and geotechnical methods in investigating the deformation of earthfill dams; A case study of Mahabad Earthfill Dam, Iran." Journal of Engineering Science and Technology. 11 (4), pp. 619-637.Article
Effects of wood fiber size on the performance of biodegradable foam
Deng, Layun, He, Hongchen, Chen, Zejun, Liu, Shan and Chevali, Venkata S.. 2017. "Effects of wood fiber size on the performance of biodegradable foam." Journal of Biobased Materials and Bioenergy. 11 (3), pp. 206-209. https://doi.org/10.1166/jbmb.2017.1662Article
Influence of post-processing on the compressive behaviour of full-scale pultruded FRP columns: Holes and inserts
Alajarmeh, Omar, Alhawamdeh, Mohammad, Shelley, Tristan, Mohammed, Ali, Nicol, Lachlan, Schubel, Peter and Zeng, Xuesen. 2022. "Influence of post-processing on the compressive behaviour of full-scale pultruded FRP columns: Holes and inserts." Engineering Structures. 266, pp. 1-16. https://doi.org/10.1016/j.engstruct.2022.114547Article
0
total views0
total downloads0
views this month0
downloads this month