A Comparative Study on the Effectiveness of Passive and Free Cooling Application Methods of Phase Change Materials for Energy Efficient Retrofitting in Residential Buildings

Article

Alam, Morshed, Sanjayan, Jay, Zou, Patrick X.W., Ramakrishnan, Sayanthan and Wilson, John. 2017. "A Comparative Study on the Effectiveness of Passive and Free Cooling Application Methods of Phase Change Materials for Energy Efficient Retrofitting in Residential Buildings." Procedia Engineering. 180, pp. 993-1002. https://doi.org/10.1016/j.proeng.2017.04.259
Article Title

A Comparative Study on the Effectiveness of Passive and Free Cooling Application Methods of Phase Change Materials for Energy Efficient Retrofitting in Residential Buildings

ERA Journal ID211240
Article CategoryArticle
AuthorsAlam, Morshed, Sanjayan, Jay, Zou, Patrick X.W., Ramakrishnan, Sayanthan and Wilson, John
Journal TitleProcedia Engineering
Journal Citation180, pp. 993-1002
Number of Pages10
Year2017
PublisherElsevier
Place of PublicationNetherlands
ISSN1877-7058
Digital Object Identifier (DOI)https://doi.org/10.1016/j.proeng.2017.04.259
Web Address (URL)https://www.sciencedirect.com/science/article/pii/S1877705817317666
AbstractThis study compared the effectiveness of passive and free cooling application methods of Phase change materials (PCMs) when used as energy efficient retrofitting in a residential building. A modern duplex residential building in Melbourne, Australia was considered for the case study. In passive application, PCM was installed in the ceilings of the house. In free cooling application, outdoor air was supplied to the indoor after passing it through a PCM storage unit. The study was carried out using building simulation software EnergyPlus V8.4 and computational fluid dynamics (CFD) software ANSYS V15.1. The developed simulation models of passive and free cooling applications were validated using relevant experimental data. The validated simulation models were then used to investigate the effectiveness of these PCM application methods in the selected building. The results showed that, for the studied house, free cooling application of PCM is more effective than the passive application in reducing the internal zone temperature. Under typical summer climatic conditions of Melbourne, free cooling application resulted in up to 1.8°C reduction in zone air temperature, compared to only 0.5°C when PCM was applied as passive heat storage system. The outcome of this study would be helpful in selecting the effective PCM application method for these types of residential buildings in similar climates.
KeywordsPhase change materials (PCMs); passive cooling; heat exchanger; free cooling; thermal simulations
Contains Sensitive ContentDoes not contain sensitive content
ANZSRC Field of Research 2020400505. Construction materials
Byline AffiliationsSwinburne University of Technology
Permalink -

https://research.usq.edu.au/item/z775z/a-comparative-study-on-the-effectiveness-of-passive-and-free-cooling-application-methods-of-phase-change-materials-for-energy-efficient-retrofitting-in-residential-buildings

Log in to edit

Download files

Published Version
1-s2.0-S1877705817317666-main.pdf
License: CC BY-NC-ND 4.0
File access level: Anyone

  • 29
    total views
  • 12
    total downloads
  • 1
    views this month
  • 0
    downloads this month

Export as

Related outputs

Active Rheology Control of Concrete Using Encapsulated Accelerator as Responsive Additives for Concrete 3D Printing
Kanagasuntharam, Sasithar, Ramakrishnan, Sayanthan and Sanjayan, Jay. 2024. "Active Rheology Control of Concrete Using Encapsulated Accelerator as Responsive Additives for Concrete 3D Printing." 4th RILEM International Conference on Concrete and Digital Fabrication. Munich, Germany 04 - 06 Sep 2024 Germany. Springer. https://doi.org/10.1007/978-3-031-70031-6_29
Encapsulation of sodium silicate to attain on demand buildability enhancement in concrete 3D printing
Kanagasuntharam, Sasitharan, Ramakrishnan, Saya and Sanjayan, Jay. 2024. "Encapsulation of sodium silicate to attain on demand buildability enhancement in concrete 3D printing." Journal of Building Engineering. 94. https://doi.org/10.1016/j.jobe.2024.109912
Printhead mixing of geopolymer and OPC slurries for hybrid alkali-activated cement in 3D concrete printing
Ramakrishnan, Sayanthan, Pasupathy, Kirubajiny, Mechtcherine, Viktor and Sanjayan, Jay. 2024. "Printhead mixing of geopolymer and OPC slurries for hybrid alkali-activated cement in 3D concrete printing." Construction and Building Materials. 430. https://doi.org/10.1016/j.conbuildmat.2024.136439
Investigating PCM encapsulated NaOH additive for set-on-demand in 3D concrete printing
Kanagasuntharam, Sasitharan, Ramakrishnan, Sayanthan and Sanjayan, Jay. 2024. "Investigating PCM encapsulated NaOH additive for set-on-demand in 3D concrete printing." Cement and Concrete Composites. 145. https://doi.org/10.1016/j.cemconcomp.2023.105313
The ambient and elevated temperature performance of hemp fibre reinforced alkali-activated cement foam: Effects of fibre dosage and alkali treatment
Dhasindrakrishna, K, Pasupathy, Kirubajiny, Ramakrishnan, Sayanthan and Sanjayan, Jay. 2023. "The ambient and elevated temperature performance of hemp fibre reinforced alkali-activated cement foam: Effects of fibre dosage and alkali treatment." Journal of Building Engineering. 76. https://doi.org/10.1016/j.jobe.2023.107131
3D concrete printing of eco-friendly geopolymer containing brick waste
Pasupathy, Kirubajiny, Ramakrishnan, Sayanthan and Sanjayan, Jay. 2023. "3D concrete printing of eco-friendly geopolymer containing brick waste." Cement and Concrete Composites. 138. https://doi.org/10.1016/j.cemconcomp.2023.104943
Rapid early age strength development of in-line activated geopolymer for concrete 3D printing
Muthukrishnan, Shravan, Ramakrishnan, Sayanthan and Sanjayan, Jay. 2023. "Rapid early age strength development of in-line activated geopolymer for concrete 3D printing." Construction and Building Materials. 406. https://doi.org/10.1016/j.conbuildmat.2023.133312
Effect of Magnetorheological additives on the buildability of 3D concrete printing
Kanagasuntharam, Sasitharan, Ramakrishnan, Sayanthan, Muthukrishnan, Shravan and Sanjayan, Jay. 2023. "Effect of Magnetorheological additives on the buildability of 3D concrete printing." Journal of Building Engineering. 74. https://doi.org/10.1016/j.jobe.2023.106814
Effect of hydrophobic surface-modified fine aggregates on efflorescence control in geopolymer
Pasupathy, Kirubajiny, Ramakrishnan, Sayanthan and Sanjayan, Jay. 2022. "Effect of hydrophobic surface-modified fine aggregates on efflorescence control in geopolymer." Cement and Concrete Composites. 126. https://doi.org/10.1016/j.cemconcomp.2021.104337
Enhancing the chemical foaming process using superplasticizer in aerated geopolymer concrete
Pasupathy, Kirubajiny, Ramakrishnan, Sayanthan and Sanjayan, Jay. 2022. "Enhancing the chemical foaming process using superplasticizer in aerated geopolymer concrete." Construction and Building Materials. 324. https://doi.org/10.1016/j.conbuildmat.2022.126535
Set on demand geopolymer using print head mixing for 3D concrete printing
Muthukrishnan, Shravan, Ramakrishnan, Sayanthan and Sanjayan, Jay. 2022. "Set on demand geopolymer using print head mixing for 3D concrete printing." Cement and Concrete Composites. 128. https://doi.org/10.1016/j.cemconcomp.2022.104451
Synthesis and performance of intumescent alkali-activated rice husk ash for fire-resistant applications
Dhasindrakrishna, K., Ramakrishnan, Sayanthan, Pasupathy, Kirubajiny and Sanjayan, Jay. 2022. "Synthesis and performance of intumescent alkali-activated rice husk ash for fire-resistant applications." Journal of Building Engineering. 51. https://doi.org/10.1016/j.jobe.2022.104281
Rheology and elevated temperature performance of geopolymer foam concrete with varying PVA fibre dosage
Dhasindrakrishna, K., Pasupathy, Kirubajiny, Ramakrishnan, Sayanthan and Sanjayan, Jay. 2022. "Rheology and elevated temperature performance of geopolymer foam concrete with varying PVA fibre dosage." Materials Letters. 328. https://doi.org/10.1016/j.matlet.2022.133122
In-line activation of cementitious materials for 3D concrete printing
Ramakrishnan, Sayanthan, Kanagasuntharam, Sasitharan and Sanjayan, Jay. 2022. "In-line activation of cementitious materials for 3D concrete printing." Cement and Concrete Composites. 131. https://doi.org/10.1016/j.cemconcomp.2022.104598
Enhancing the properties of foam concrete 3D printing using porous aggregates
Pasupathy, Kirubajiny, Ramakrishnan, Sayanthan and Sanjayan, Jay. 2022. "Enhancing the properties of foam concrete 3D printing using porous aggregates." Cement and Concrete Composites. 133. https://doi.org/10.1016/j.cemconcomp.2022.104687
In-line activation of geopolymer slurry for concrete 3D printing
Muthukrishnan, Shravan, Ramakrishnan, Sayanthan and Sanjayan, Jay. 2022. "In-line activation of geopolymer slurry for concrete 3D printing." Cement and Concrete Research. 162. https://doi.org/10.1016/j.cemconres.2022.107008
Synthesis and properties of thermally enhanced aerated geopolymer concrete using form-stable phase change composite
Ramakrishnan, Sayanthan, Pasupathy, Kirubajiny and Sanjayan, Sanjayan. 2021. "Synthesis and properties of thermally enhanced aerated geopolymer concrete using form-stable phase change composite." Journal of Building Engineering. 40. https://doi.org/10.1016/j.jobe.2021.102756
Concrete 3D printing of lightweight elements using hollow-core extrusion of filaments
Ramakrishnan, Sayanthan, Muthukrishnan, Shravan, Sanjayan, Jay and Pasupathy, Kirubajiny. 2021. "Concrete 3D printing of lightweight elements using hollow-core extrusion of filaments." Cement and Concrete Composites. 123. https://doi.org/10.1016/j.cemconcomp.2021.104220
Influence of recycled concrete aggregate on the foam stability of aerated geopolymer concrete
Pasupathy, Kirubajiny, Ramakrishnan, Sayanthan and Sanjayan, Jay. 2021. "Influence of recycled concrete aggregate on the foam stability of aerated geopolymer concrete." Construction and Building Materials. 271. https://doi.org/10.1016/j.conbuildmat.2020.121850
Formulating eco-friendly geopolymer foam concrete by alkali-activation of ground brick waste
Pasupathy, Kirubajiny, Ramakrishnan, Sayanthan and Sanjayan, Jay. 2021. "Formulating eco-friendly geopolymer foam concrete by alkali-activation of ground brick waste." Journal of Cleaner Production. 325. https://doi.org/10.1016/j.jclepro.2021.129180
Technologies for improving buildability in 3D concrete printing
Muthukrishnan, Shravan, Ramakrishnan, Sayanthan and Sanjayan, Jay. 2021. "Technologies for improving buildability in 3D concrete printing." Cement and Concrete Composites. 122. https://doi.org/10.1016/j.cemconcomp.2021.104144
Effect of alkali reactions on the rheology of one-part 3D printable geopolymer concrete
Muthukrishnan, Shravan, Ramakrishnan, Sayanthan and Sanjayan, Jay. 2021. "Effect of alkali reactions on the rheology of one-part 3D printable geopolymer concrete." Cement and Concrete Composites. 116. https://doi.org/10.1016/j.cemconcomp.2020.103899
Collapse of fresh foam concrete: Mechanisms and influencing parameters
Dhasindrakrishna, K., Ramakrishnan, Sayanthan, Pasupathy, Kirubajiny and Sanjayan, Jay. 2021. "Collapse of fresh foam concrete: Mechanisms and influencing parameters." Cement and Concrete Composites. 122. https://doi.org/10.1016/j.cemconcomp.2021.104151
Progress, current thinking and challenges in geopolymer foam concrete technology
Dhasindrakrishna, K., Pasupathy, Kirubajiny, Ramakrishnan, Sayanthan and Sanjayan, Jay. 2021. "Progress, current thinking and challenges in geopolymer foam concrete technology." Cement and Concrete Composites. 116, p. 103886. https://doi.org/10.1016/j.cemconcomp.2020.103886
Effect of microwave heating on interlayer bonding and buildability of geopolymer 3D concrete printing
Muthukrishnan, Shravan, Ramakrishnan, Sayanthan and Sanjayan, Jay. 2020. "Effect of microwave heating on interlayer bonding and buildability of geopolymer 3D concrete printing." Construction and Building Materials. 265. https://doi.org/10.1016/j.conbuildmat.2020.120786
Effect of yield stress development on the foam-stability of aerated geopolymer concrete
Dhasindrakrishna, K., Pasupathy, K., Ramakrishnan, Sayanthan and Sanjayan, Jay. 2020. "Effect of yield stress development on the foam-stability of aerated geopolymer concrete." Cement and Concrete Research. 138. https://doi.org/10.1016/j.cemconres.2020.106233
Effects of various carbon additives on the thermal storage performance of form-stable PCM integrated cementitious composites
Ramakrishnan, Sayanthan, Wang, Xiaoming and Sanjayan, Jay. 2019. "Effects of various carbon additives on the thermal storage performance of form-stable PCM integrated cementitious composites." Applied Thermal Engineering. 148, pp. 491-501. https://doi.org/10.1016/j.applthermaleng.2018.11.025
Thermal enhancement of paraffin/hydrophobic expanded perlite granular phase change composite using graphene nanoplatelets
Ramakrishnan, Sayanthan, Wang, Xiaoming and Sanjayan, Jay. 2018. "Thermal enhancement of paraffin/hydrophobic expanded perlite granular phase change composite using graphene nanoplatelets ." Energy and Buildings. 169, pp. 206-215. https://doi.org/10.1016/j.enbuild.2018.03.053
Cloud-based safety information and communication system in infrastructure construction
Zou, Patrick X.W., Lun, Percy, Cipolla, Dean and Mohamed, Sherif. 2017. "Cloud-based safety information and communication system in infrastructure construction ." Safety Science. 98, pp. 50-69. https://doi.org/10.1016/j.ssci.2017.05.006
Experimental and Numerical Study on Energy Performance of Buildings Integrated with Phase Change Materials
Ramakrishnan, Sayanthan, Wang, Xiaoming, Sanjayan, Jay and Wilson, John. 2017. "Experimental and Numerical Study on Energy Performance of Buildings Integrated with Phase Change Materials." 8th International Conference on Applied Energy (ICAE 2016) . Beijing, China 08 201 - 11 Oct 2016 Netherlands. Elsevier. https://doi.org/10.1016/j.egypro.2017.03.627
Thermal Energy Storage Enhancement of Lightweight Cement Mortars with the Application of Phase Change Materials
Ramakrishnan, Sayanthan, Wang, Xiaoming, Sanjayan, Jay and Wilson, John. 2017. "Thermal Energy Storage Enhancement of Lightweight Cement Mortars with the Application of Phase Change Materials." Procedia Engineering. 180, pp. 1170-1177. https://doi.org/10.1016/j.proeng.2017.04.277
Heat Transfer Performance Enhancement of Paraffin/Expanded Perlite Phase Change Composites with Graphene Nano-platelets
Ramakrishnan, Sayanthan, Wang, Xiaoming, Sanjayan, Jay and Wilson, John. 2017. "Heat Transfer Performance Enhancement of Paraffin/Expanded Perlite Phase Change Composites with Graphene Nano-platelets." 8th International Conference on Applied Energy (ICAE 2016) . Beijing, China 08 201 - 11 Oct 2016 Netherlands. Elsevier. https://doi.org/10.1016/j.egypro.2017.03.964
Thermal performance assessment of phase change material integrated cementitious composites in buildings: Experimental and numerical approach
Ramakrishnan, Applied Energy, Wang, Xiaoming, Sanjayan, Sanjayan and Wilson, John. 2017. "Thermal performance assessment of phase change material integrated cementitious composites in buildings: Experimental and numerical approach." Applied Energy. 207, pp. 654-664. https://doi.org/10.1016/j.apenergy.2017.05.144
Assessing the feasibility of integrating form-stable phase change material composites with cementitious composites and prevention of PCM leakage
Ramakrishnan, Sayanthan, Wang, Xiaoming, Sanjayan, Jay and Wilson, John. 2017. "Assessing the feasibility of integrating form-stable phase change material composites with cementitious composites and prevention of PCM leakage." Materials Letters. 192, pp. 88-91. https://doi.org/10.1016/j.matlet.2016.12.052
Thermal performance of buildings integrated with phase change materials to reduce heat stress risks during extreme heatwave events
Ramakrishnan, Sayanthan, Wang, Xiaoming, Sanjayan, Jay and Wilson, John. 2017. "Thermal performance of buildings integrated with phase change materials to reduce heat stress risks during extreme heatwave events." Applied Energy. 194, pp. 410-421. https://doi.org/10.1016/j.apenergy.2016.04.084
Development of thermal energy storage cementitious composites (TESC) containing a novel paraffin/hydrophobic expanded perlite composite phase change material
Ramakrishnan, Sayanthan, Wang, Xiaoming, Sanjayan, Jay, Petinakis, Eustathios and Wilson, John. 2017. "Development of thermal energy storage cementitious composites (TESC) containing a novel paraffin/hydrophobic expanded perlite composite phase change material." Solar Energy. 158, pp. 626-635. https://doi.org/10.1016/j.solener.2017.09.064
Evaluating the passive and free cooling application methods of phase change materials in residential buildings: A comparative study
Alam, Morshed, Sanjayan, Jay, Zou, Patrick X.W., Ramakrishnan, Sayanthan and Wilson, John. 2017. "Evaluating the passive and free cooling application methods of phase change materials in residential buildings: A comparative study." Energy and Buildings. 148, pp. 238-256. https://doi.org/10.1016/j.enbuild.2017.05.018
Use of geopolymer concrete in column applications
Lokuge, Weena, Sanjayan, Jay and Setunge, Sujeeva. 2015. "Use of geopolymer concrete in column applications." 27th Biennial National Conference of the Concrete Institute of Australia (Concrete 2015) in conjunction with the 69th RILEM Week: Construction Innovations, Research into Practice. Melbourne, Australia 30 Aug - 02 Sep 2015 Australia.
Application of Phase Change Materials to Reduce Heat Related Risks During Extreme Heat Waves in Australian Dwellings
Ramakrishnan, Sayanthan, Wang, Xiaoming, Sanjayan, Jay and Wilson, John. 2016. "Application of Phase Change Materials to Reduce Heat Related Risks During Extreme Heat Waves in Australian Dwellings." Applied Energy Symposium and Summit 2015 (CUE 2015). Fuzhou, China 15 - 17 Nov 2015 Netherlands. Elsevier. https://doi.org/10.1016/j.egypro.2016.06.052
A novel paraffin/expanded perlite composite phase change material for prevention of PCM leakage in cementitious composites
Ramakrishnan, Sayanthan, Sanjayan, Jay, Wang, Xiaoming, Alam, Morshed and Wilson, John. 2015. "A novel paraffin/expanded perlite composite phase change material for prevention of PCM leakage in cementitious composites." Applied Energy. 157, pp. 85-94. https://doi.org/10.1016/j.apenergy.2015.08.019
Stress-strain model for high strength concrete confined by FRP
Lokuge, W. P., Setunge, S. and Sanjayan, J. G.. 2011. "Stress-strain model for high strength concrete confined by FRP." Fragomeni, Sam, Venkatesan, Srikanth, Lam, Nelson T. K. and Setunge, Sujeeva (ed.) 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM 21). Melbourne, Australia 07 - 10 Dec 2010 Leiden, Netherlands. https://doi.org/10.1201/b10571-85
Modelling eccentrically loaded high-strength concrete columns
Lokuge, Weena, Setunge, Sujeeva and Sanjayan, J. G.. 2003. "Modelling eccentrically loaded high-strength concrete columns." Magazine of Concrete Research. 55 (4), pp. 331-341.
Triaxial test results of high-strength concrete subjected to cyclic loading
Lokuge, Weena, Sanjayan, J. G. and Setunge, Sujeeva. 2003. "Triaxial test results of high-strength concrete subjected to cyclic loading." Magazine of Concrete Research. 55 (4), pp. 321-329.
Constitutive model for confined high strength concretes subjected to cyclic loading
Lokuge, Weena, Sanjayan, J. G. and Setunge, Sujeeva. 2004. "Constitutive model for confined high strength concretes subjected to cyclic loading." Journal of Materials in Civil Engineering. 16 (4), pp. 297-305. https://doi.org/10.1061/~ASCE!0899-1561~2004!16:4~297!
Stress-strain model for laterally confined concrete
Lokuge, Weena P., Sanjayan, J. G. and Setunge, Sujeeva. 2005. "Stress-strain model for laterally confined concrete." Journal of Materials in Civil Engineering. 17 (6), pp. 607-616. https://doi.org/10.1061/ASCE0899-1561200517:6607