School of Engineering

Type	Department/Institute
Faculty/Department	Academic Affairs
Head	A/Pr Weena Lokuge
	Prof Prasad Yarlagadda
Director of Research	A/Pr Weena Lokuge

Latest research outputs

4907 results found

Sort by Date Title

Cooling towers

Mossad, Ruth. 2011. "Cooling towers." Capehart, Barney L. (ed.) Encyclopedia of energy engineering and technology. London, United Kingdom. Informa UK (Taylor & Francis Books). pp. 246-254

Edited book (chapter)

Numerical simulation to optimize the design of double glazed doors for closed refrigerated vertical display cabinets

Mossad, Ruth. 2006. "Numerical simulation to optimize the design of double glazed doors for closed refrigerated vertical display cabinets." de Vahl Davis, Graham and Leonardie, Eddie (ed.) 13th International Heat Transfer Conference IHTC-13. Sydney, Australia 13 - 18 Aug 2006 Redding, CT, USA.

Paper

Computational simulation of the wind-force on metal meshes

Sharifian, Ahmad and Buttsworth, David R.. 2007. "Computational simulation of the wind-force on metal meshes." Jacobs, Peter A., McIntyre, Tim, Cleary, Matthew J., Buttsworth, David R., Mee, David, Clements, Rose, Morgan, Richard and Lemckert, Charles (ed.) 16th Australasian Fluid Mechanics Conference (AFMC 2007). Gold Coast, Australia 03 - 07 Dec 2007 Brisbane, Australia.

Paper

2020 VISION and its implication for engineering management education

Goh, Steven. 2007. "2020 VISION and its implication for engineering management education." Sondergaard, Harald and Hadgraft, Roger (ed.) 18th Annual Conference of the Australasian Association for Engineering Education (AAEE 2007). Melbourne, Australia 09 - 13 Dec 2007 Melbourne, Australia.

Paper

Evaporator design for an isokinetic total water content probe in a naturally aspirating configuration

Buttsworth, D. R., Davison, C., MacLeod, J. D. and Strapp, J. W.. 2007. "Evaporator design for an isokinetic total water content probe in a naturally aspirating configuration." Jacobs, Peter, McIntyre, Tim, Cleary, Matthew, Buttsworth, David, Mee, David, Clements, Rose, Morgan, Richard and Lemckert, Charles (ed.) 16th Australasian Fluid Mechanics Conference (AFMC 2007). Gold Coast, Australia 03 - 07 Dec 2007 Brisbane, Australia.

Paper

A new internal combustion engine configuration: opposed pistons with crank offset

Malpress, Ray and Buttsworth, David R.. 2007. "A new internal combustion engine configuration: opposed pistons with crank offset." Jacobs, Peter A., McIntyre, Tim, Cleary, Matthew J., Buttsworth, David R., Mee, David, Clements, Rose, Morgan, Richard and Lemckert, Charles (ed.) 16th Australasian Fluid Mechanics Conference (AFMC 2007). Gold Coast, Australia 03 - 07 Dec 2007 Brisbane, Australia.

Paper

Innovative all composite multi-pultrusion truss system for stressed arch deployable shelters

Omar, T., Van Erp, G., Aravinthan, T. and Key, P.. 2007. "Innovative all composite multi-pultrusion truss system for stressed arch deployable shelters." Rabboo, Fathi Abd and Fathelbab, Fahmy (ed.) AICSGE 6: 6th Alexandria International Conference on Structural and Geotechnical Engineering. Alexandria, Egypt 15 - 17 Apr 2007 Alexandria, Egypt.

Paper

Improving power to weight ratio of pneumatically powered legged robots

McLatchey, Graham and Billingsley, John. 2007. "Improving power to weight ratio of pneumatically powered legged robots." Xie, Ming, Dubowsky, Steven, Fontaine, Jean-Guy, Tokhi, M. Osman and Virk, Gurvinder S. (ed.) 10th International Conference on Climbing and Walking Robots and the Supporting Technologies for Mobile Machines: CLAWAR 2007. Singapore 16 - 18 Jul 2007 Singapore.

Paper

Vision based macadamia yield assessment

Billingsley, John, Dunn, Mark and Bell, David. 2006. "Vision based macadamia yield assessment." Sensor Review. 26 (4), pp. 312-317. https://doi.org/10.1108/02602280610692024

Article

Anomalous grain coarsening behaviour observed in grain-refined aluminium alloy cast using low superheat

Taylor, J. A., Wang, H., StJohn, D. H. and Bainbridge, I. F.. 2001. "Anomalous grain coarsening behaviour observed in grain-refined aluminium alloy cast using low superheat." Anjier, Joseph L. (ed.) 130th TMS Annual MeetingLight Metals 2001. New Orleans, Louisanna 11 - 15 Feb 2001 Warrendale, PA. United States.

Paper

An overview of prestressed concrete technology in Australia

Aravinthan, Thiru. 2004. "An overview of prestressed concrete technology in Australia." Journal of Prestressed Concrete. 46 (1), pp. 34-41.

Article

Viewpoint: The future of mechatronics

Billingsley, John. 2004. "Viewpoint: The future of mechatronics." Assembly Automation: the international journal of assembly technology and management. 24 (4), pp. 337-339.

Article

Boundary integral-based domain decomposition technique for solution of Navier Stokes equations

Mai-Duy, N. and Tran-Cong, T.. 2004. "Boundary integral-based domain decomposition technique for solution of Navier Stokes equations." CMES Computer Modeling in Engineering and Sciences. 6 (1), pp. 59-75. https://doi.org/10.3970/cmes.2004.006.059

Article

Indirect RBFN method with thin plate splines for numerical solution of differential equations

Mai-Duy, N. and Tran-Cong, T.. 2003. "Indirect RBFN method with thin plate splines for numerical solution of differential equations." CMES Computer Modeling in Engineering and Sciences. 4 (1), pp. 85-102. https://doi.org/10.3970/cmes.2003.004.085

Article

Measurement of unsteady gas temperature with optical fibre Fabry-Perot microsensors

Kilpatrick, J. M., MacPherson, W. N., Barton, J. S., Jones, J. D. C., Buttsworth, D. R., Jones, T. V., Chana, K. S. and Anderson, S. J.. 2002. "Measurement of unsteady gas temperature with optical fibre Fabry-Perot microsensors." Measurement Science and Technology. 13 (5), pp. 706-712. https://doi.org/10.1088/0957-0233/13/5/308

Article

Train crashworthiness and its impact on society

Brell, Edward, Van Erp, Gerard and Snook, Chris. 2002. "Train crashworthiness and its impact on society." Australian Journal of Mechanical Engineering. 25 (2), pp. 103-112.

Article

A sensor for the sugar cane harvester topper

McCarthy, Stuart and Billingsley, John. 2002. "A sensor for the sugar cane harvester topper." Sensor Review. 22 (3), pp. 242-246. https://doi.org/10.1108/02602280210433089

Article

BEM-RBF approach for viscoelastic flow analysis

Tran-Cong, T., Mai-Duy, N. and Phan-Thien, N.. 2002. "BEM-RBF approach for viscoelastic flow analysis." Engineering Analysis with Boundary Elements. 26 (9), pp. 757-762. https://doi.org/10.1016/S0955-7997(02)00041-3

Article

Mesh-free radial basis function network methods with domain decomposition for approximation of functions and numerical solution of Poisson's equations

Mai-Duy, Nam and Tran-Cong, Thanh. 2002. "Mesh-free radial basis function network methods with domain decomposition for approximation of functions and numerical solution of Poisson's equations." Engineering Analysis with Boundary Elements. 26 (2), pp. 133-156. https://doi.org/10.1016/S0955-7997(01)00092-3

Article

Automatic guidance of agricultural mobiles at the NCEA

Billingsley, John. 2000. "Automatic guidance of agricultural mobiles at the NCEA." Industrial Robot. 27 (6), pp. 449-457. https://doi.org/10.1108/01439910010378860

Article

Fuzzy future for robotics?

Billingsley, John. 1999. "Fuzzy future for robotics?" Industrial Robot. 26 (4), pp. 246-247.

Article

Directional sensitivity of skin friction measurements using nematic liquid crystal

Buttsworth, D. R., Elston, S. J. and Jones, Terry V.. 1998. "Directional sensitivity of skin friction measurements using nematic liquid crystal." Measurement Science and Technology. 9 (11), pp. 1856-1865. https://doi.org/10.1088/0957-0233/9/11/011

Article

A fast convergent iterative boundary element method on PVM cluster

Mai-Duy, N., Nguyen-Hong, P. and Tran-Cong, T.. 1998. "A fast convergent iterative boundary element method on PVM cluster." Engineering Analysis with Boundary Elements. 22 (4), pp. 307-316. https://doi.org/10.1016/S0955-7997(98)00071-X

Article

The successful development of a vision guidance system for agriculture

Billingsley, J. and Schoenfisch, M.. 1997. "The successful development of a vision guidance system for agriculture." Computers and Electronics in Agriculture. 16 (2), pp. 147-163. https://doi.org/10.1016/S0168-1699(96)00034-8

Article

An engineer's lament

Billingsley, John. 1997. "An engineer's lament." Australiasian Science Magazine. 6 (2), pp. 50-51.

Article

EXIT chart analysis of iteratively decodable source codes for wireless multimedia communications

Xiang, Wei and Leis, John W.. 2005. "EXIT chart analysis of iteratively decodable source codes for wireless multimedia communications." Wysocki, B. and Wysocki, T. (ed.) DSPCS/WITSP 2005: 4th Workshop on the Internet, Telecommunications and Signal Processing (WITSP2005). Noosa, Australia 19 - 21 Dec 2005 Sydney, Australia.

Paper

Internationalisation of Technology and Society course at University of Southern Queensland

Thorpe, David and Ahfock, Tony. 2005. "Internationalisation of Technology and Society course at University of Southern Queensland." Radcliffe, David and Humphries, Josh (ed.) 4th ASEE/AaeE Global Colloquium on Engineering Education. Sydney, Australia 26 - 29 Sep 2005 Brisbane, Australia.

Paper

Throughput and fairness performance of multiple STT-Vegas connections

Zhang, Zhongwei, Zhou, Hong and Leis, John. 2005. "Throughput and fairness performance of multiple STT-Vegas connections." Sanadidi, M. Y. (ed.) 3rd IASTED International Conference on Communications and Computer Networks. Marina del Rey, United States 24 - 26 Oct 2005 Marina del Rey, USA.

Paper

Assessing individual student performance in a team-based engineering problem solving course

Aravinthan, Thiru, Fahey, Paul and Worden, John. 2005. "Assessing individual student performance in a team-based engineering problem solving course." Radcliffe, David and Humphries, Josh (ed.) 4th ASEE/AaeE Global Colloquium on Engineering Education. Sydney, Australia 26 - 29 Sep 2005 Brisbane, Australia.

Paper

Application of machine vision to determine the density of dingo teeth

Withers, Kerry W. and Billingsley, J.. 2004. "Application of machine vision to determine the density of dingo teeth." Buttemer, W. A., Else, P. L., Hulbert, A. J., Faulks, S. C. and Turner, N. (ed.) ANZSCPB 2004: 21st Annual Meeting of Australian and New Zealand Society for Comparative Physiology and Biochemistry. Wollongong, Australia 09 - 12 Dec 2004 Wollongong, Australia.

Poster

High precision GPS guidance of mobile robots

Willgoss, Richard, Rosenfeld, Vivian and Billingsley, John. 2003. "High precision GPS guidance of mobile robots." Roberts, Jonathan and Wyeth, Gordon (ed.) 2003 Australasian Conference on Robotics and Automation (ACRA 2003). Brisbane, Australia 01 - 03 Dec 2003 Brisbane, Australia.

Paper

Machine vision system for counting macadamia nuts

Dunn, Mark and Billingsley, John. 2003. "Machine vision system for counting macadamia nuts." Roberts, Jonathan and Wyeth, Gordon (ed.) 2003 Australasian Conference on Robotics and Automation (ACRA 2003). Brisbane, Australia 01 - 03 Dec 2003 Brisbane, Australia.

Paper

BEM-RBF approach for viscoelastic flow analysis

Tran-Cong, T., Mai-Duy, N. and Phan-Thien, N.. 2001. "BEM-RBF approach for viscoelastic flow analysis." Beskos, D., Brebbia, C., Katsikadelis, J. and Manolis, G. (ed.) 23rd International Conference on the Boundary Element Method (BEM 2001). Lemnos, Greece 07 - 09 May 2001 Southampton, Hants. United Kingdom. https://doi.org/10.2495/BE010301

Paper

Teaching control fundamentals for mechatronics and robotics - the use of JavaScript for simulation and animation

Billingsley, John. 1999. "Teaching control fundamentals for mechatronics and robotics - the use of JavaScript for simulation and animation." Wyeth, Gordon and Roberts, Jonathan (ed.) ACRA 1999: Australian Conference on Robotics and Automation. Brisbane, Australia 30 Mar - 01 Apr 1999 Brisbane, Australia.

Paper

Total temperature measurements in a shock tunnel facility

Buttsworth, David R. and Jacobs, Peter A.. 1998. "Total temperature measurements in a shock tunnel facility." Thompson, M. C. and Hourigan, K. (ed.) 13th Australasian Fluid Mechanics Conference (AFMC 1998). Melbourne, Australia 13 - 18 Dec 1998 Melbourne, Australia.

Paper

Force, compliance and position control for a space frame manipulator

Cubero, Samuel N. and Billingsley, John. 1997. "Force, compliance and position control for a space frame manipulator." Werner, Bob (ed.) 4th Annual Conference on Mechatronics and Machine Vision in Practice (MViP 1997). Toowoomba, Australia 23 - 25 Sep 1997 Los Alamitos, CA. United States. https://doi.org/10.1109/MMVIP.1997.625306

Paper

Autonomous LHD loading

Petty, Matt K., Billingsley, John and Tran-Cong, Thanh. 1997. "Autonomous LHD loading." Werner, Bob (ed.) 4th Annual Conference on Mechatronics and Machine Vision in Practice (MViP 1997). Toowoomba, Australia 23 - 25 Sep 1997 Los Alamitos, CA. United States. https://doi.org/10.1109/MMVIP.1997.625330

Paper

Carbon dioxide sensing - a mechatronic approach

Maxwell, Andrew, Hancock, Nigel and Billingsley, John. 1997. "Carbon dioxide sensing - a mechatronic approach." Werner, B. (ed.) 4th Annual Conference on Mechatronics and Machine Vision in Practice (MViP 1997). Toowoomba, Australia 23 - 25 Sep 1997 Los Alamitos, CA. United States. https://doi.org/10.1109/MMVIP.1997.625292

Paper

Strength and ductility prediction of concrete beams reinforced with internal steel and external composite materials

Karunasena, W. and Anderson, W. C.. 2005. "Strength and ductility prediction of concrete beams reinforced with internal steel and external composite materials." Xie, Mike, Mouritz, Adrian, Khatibi, Akbar Afaghi, Gardiner, Craig and Chiu, Wing Kong (ed.) 4th Australasian Congress on Applied Mechanics (ACAM 2005). Melbourne, Australia 16 - 18 Feb 2005 Melbourne, Australia.

Paper

Effects of existing shear damage on externally post tensioned repair of bent caps

Aravinthan, Thiru and Suntharavadivel, T. G.. 2007. "Effects of existing shear damage on externally post tensioned repair of bent caps." Journal of Structural Engineering. 133 (11), pp. 1662-1669. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:11(1662)

Article

« Previous