Development of Empirical Equations for Irradiance Profile of a Standard Parabolic Trough Collector Using Monte Carlo Ray Tracing Technique

Paper


Islam, Majedul, Karim, M. A., Saha, Suvash C., Miller, Sarah and Yarlagadda, Prasad K. D. V.. 2014. "Development of Empirical Equations for Irradiance Profile of a Standard Parabolic Trough Collector Using Monte Carlo Ray Tracing Technique." 3rd International Conference on Energy, Environment and Sustainable Development (EESD 2013). China 12 - 13 Nov 2013 Scientific.Net. https://doi.org/10.4028/www.scientific.net/AMR.860-863.180
Paper/Presentation Title

Development of Empirical Equations for Irradiance Profile of a Standard Parabolic Trough Collector Using Monte Carlo Ray Tracing Technique

Presentation TypePaper
AuthorsIslam, Majedul, Karim, M. A., Saha, Suvash C., Miller, Sarah and Yarlagadda, Prasad K. D. V.
Journal or Proceedings TitleProceedings of the 3rd International Conference on Energy, Environment and Sustainable Development (EESD 2013)
Journal Citation860-863, pp. 180-190
Number of Pages11
Year2014
PublisherScientific.Net
ISBN9783037859728
Digital Object Identifier (DOI)https://doi.org/10.4028/www.scientific.net/AMR.860-863.180
Web Address (URL) of Paperhttps://www.scientific.net/AMR.860-863.180
Conference/Event3rd International Conference on Energy, Environment and Sustainable Development (EESD 2013)
Event Details
3rd International Conference on Energy, Environment and Sustainable Development (EESD 2013)
Delivery
In person
Event Date
12 to end of 13 Nov 2013
Event Location
China
Abstract

Irradiance profile around the receiver tube (RT) of a parabolic trough collector (PTC) is a key effect of optical performance that affects the overall energy performance of the collector. Thermal performance evaluation of the RT relies on the appropriate determination of the irradiance profile. This article explains a technique in which empirical equations were developed to calculate the local irradiance as a function of angular location of the RT of a standard PTC using a vigorously verified Monte Carlo ray tracing model. A large range of test conditions including daily normal insolation, spectral selective coatings and glass envelop conditions were selected from the published data by Dudley et al.[1] for the job. The R2 values of the equations are excellent that vary in between 0.9857 and 0.9999. Therefore, these equations can be used confidently to produce realistic non-uniform boundary heat flux profile around the RT at normal incidence for conjugate heat transfer analyses of the collector. Required values in the equations are daily normal insolation, and the spectral selective properties of the collector components. Since the equations are polynomial functions, data processing software can be employed to calculate the flux profile very easily and quickly. The ultimate goal of this research is to make the concentrating solar power technology cost competitive with conventional energy technology facilitating its ongoing research.

KeywordsCSP; LS2; Optical modeling; MCRT; PTC
Public Notes

There are no files associated with this item.

SeriesAdvanced Materials Research
Byline AffiliationsQueensland University of Technology
Commonwealth Scientific and Industrial Research Organisation (CSIRO), Australia
Permalink -

https://research.usq.edu.au/item/w4570/development-of-empirical-equations-for-irradiance-profile-of-a-standard-parabolic-trough-collector-using-monte-carlo-ray-tracing-technique

  • 3
    total views
  • 0
    total downloads
  • 0
    views this month
  • 0
    downloads this month

Export as

Related outputs

Differences in Carotid Artery Geometry and Flow Caused by Body Postural Changes and Physical Exercise
Xiang, Yuqiao, Mendieta, Jessica Benitez, Wang, Jiaqiu, Paritala, Phani Kumari, Anbananthan, Haveena, Catano, Jorge Alberto Amaya, Fontanarosa, Davide, Yarlagadda, Prasad and Li, Zhiyong. 2023. "Differences in Carotid Artery Geometry and Flow Caused by Body Postural Changes and Physical Exercise." Ultrasound in Medicine and Biology. 49 (3), pp. 820-830. https://doi.org/10.1016/j.ultrasmedbio.2022.11.009
Investigation of the Factors That Contribute to Fresh Fruit and Vegetable Losses in the Australian Fresh Food Supply Chain
Sanad Alsbu, Reham Abdullah, Yarlagadda, Prasad and Karim, Azharul. 2023. "Investigation of the Factors That Contribute to Fresh Fruit and Vegetable Losses in the Australian Fresh Food Supply Chain." Processes. 11 (4), pp. 1-18. https://doi.org/10.3390/pr11041154
Investigating the properties of tin-oxide thin film developed by sputtering process for perovskite solar cells
Onyeagba, Chijioke Raphael, Islam, Majedul, Yarlagadda, Prasad and Tesfamichael, Tuquabo. 2023. "Investigating the properties of tin-oxide thin film developed by sputtering process for perovskite solar cells." Materials for Renewable and Sustainable Energy. 12 (1), pp. 31-37. https://doi.org/10.1007/s40243-022-00226-z
A mathematical framework for regional hospital case mix planning and capacity appraisal
Burdett, Robert L., Corry, Paul, Yarlagadda, Prasad, Cook, David, Birgan, Sean and McPhail, Steven M. 2023. "A mathematical framework for regional hospital case mix planning and capacity appraisal." Operations Research Perspectives. 10, pp. 1-23. https://doi.org/10.1016/j.orp.2022.100261
A User-Centric 3D-Printed Modular Peristaltic Pump for Microfluidic Perfusion Applications
Catano, Jorge A., Farthing, Steven, Mascarenhas, Zeus, Nathaniel, Lake, Yarlagadda, Prasad, Li, Zhiyong and Toh, Yi-Chin. 2023. "A User-Centric 3D-Printed Modular Peristaltic Pump for Microfluidic Perfusion Applications." Micromachines. 14 (5), pp. 1-17. https://doi.org/10.3390/mi14050930
Reproducibility of the computational fluid dynamic analysis of a cerebral aneurysm monitored over a decade
Paritala, Phani Kumari, Anbananthan, Haveena, Hautaniemi, Jacob, Smith, Macauley, George, Antony, Allenby, Mark, Mendieta, Jessica Benitez, Wang, Jiaqiu, Maclachlan, Liam, Liang, EeShern, Prior, Marita, Yarlagadda, Prasad K. D. V., Winter, Craig and Li, Zhiyong. 2023. "Reproducibility of the computational fluid dynamic analysis of a cerebral aneurysm monitored over a decade ." Scientific Reports. 13 (1), pp. 1-12. https://doi.org/10.1038/s41598-022-27354-w
Finite Element Modelling of a Gram-Negative Bacterial Cell and Nanospike Array for Cell Rupture Mechanism Study
Islam, Majedul, Aldawsari, Falah Sahal S. and Yarlagadda, Prasad K. D. V.. 2023. "Finite Element Modelling of a Gram-Negative Bacterial Cell and Nanospike Array for Cell Rupture Mechanism Study." Molecules. 28 (5), pp. 1-14. https://doi.org/10.3390/molecules28052184
Nanospikes on Customized 3D-Printed Titanium Implant Surface Inhibits Bacterial Colonization
Mathew, Asha, Hasan, Jafar, Singamneni, Sarat and Yarlagadda, Prasad K. D. V.. 2023. "Nanospikes on Customized 3D-Printed Titanium Implant Surface Inhibits Bacterial Colonization." Advanced Engineering Materials. 25 (8). https://doi.org/10.1002/adem.202201306
Experimental and thermodynamic analysis of solar air dryer equipped with V-groove double pass collector: Techno-economic and exergetic measures
Hassan, Ali, Nikbahkt, Ali M., Welsh, Zachary, Yarlagadda, Prasad, Fawzia, Sabrina and Karim, Azharul. 2022. "Experimental and thermodynamic analysis of solar air dryer equipped with V-groove double pass collector: Techno-economic and exergetic measures." Energy Conversion and Management. 16, pp. 1-16. https://doi.org/10.1016/j.ecmx.2022.100296
An Overview of Hospital Capacity Planning and Optimisation
Humphreys, Peter, Spratt, Belinda, Tariverdi, Mersedeh, Burdett, Robert L., Cook, David, Yarlagadda, Prasad K. D. V. and Corry, Paul. 2022. "An Overview of Hospital Capacity Planning and Optimisation ." Healthcare. 10 (5). https://doi.org/10.3390/healthcare10050826
Anodization of medical grade stainless steel for improved corrosion resistance and nanostructure formation targeting biomedical applications
Herath, Indika, Davies, Joseph, Will, Geoffrey, Tran, Phong A., Velic, Velic, Sarvghad, Madjid, Islam, Majedul, Paritala, Phani Kumari, Jaggessar, Alka, Schuetz, Michael, Chatterjee, Kaushik and Yarlagadda, Prasad K.D.V.. 2022. "Anodization of medical grade stainless steel for improved corrosion resistance and nanostructure formation targeting biomedical applications ." Electrochimica Acta. 416, pp. 1-16. https://doi.org/10.1016/j.electacta.2022.140274
Fluid Flow Induces Differential Detachment of Live and Dead Bacterial Cells from Nanostructured Surfaces
Senevirathne, S. W. M. IshanthaA., Toh, Yi-Chin and Yarlagadda, Prasad K. D. V.. 2022. "Fluid Flow Induces Differential Detachment of Live and Dead Bacterial Cells from Nanostructured Surfaces ." ACS Omega. 7 (27), p. 23201–23212. https://doi.org/10.1021/acsomega.2c01208
TiO2 Nanostructures That Reduce the Infectivity of Human Respiratory Viruses Including SARS-CoV-2
Jaggessar, Alka, Velic, Amar, Yarlagadda, Prasad KDV and Spann, Kirsten. 2022. "TiO2 Nanostructures That Reduce the Infectivity of Human Respiratory Viruses Including SARS-CoV-2 ." ACS Biomaterials Science and Engineering. 8 (7), pp. 2954-2959. https://doi.org/10.1021/acsbiomaterials.2c00326
Bactericidal Efficacy of Nanostructured Surfaces Increases under Flow Conditions
Senevirathne, S. W. M. A. Ishantha, Mathew, Asha, Toh, Yi-Chin and Yarlagadda, Prasad K. D. V.. 2022. "Bactericidal Efficacy of Nanostructured Surfaces Increases under Flow Conditions ." ACS Omega. 7 (45), p. 41711–41722. https://doi.org/10.1021/acsomega.2c05828
Trends in Bactericidal Nanostructured Surfaces: An Analytical Perspective
Senevirathne, S. W. M. A. Ishantha, Hasan, Jafar, Mathew, Asha, Jaggessar, Alka and Yarlagadda, Prasad K.D.V.. 2021. "Trends in Bactericidal Nanostructured Surfaces: An Analytical Perspective ." ACS Applied Bio Materials. 4 (10), pp. 7626-7642. https://doi.org/10.1021/acsabm.1c00839
A systematic approach towards biomimicry of nanopatterned cicada wings on titanium using electron beam lithography
Shahali, Hesam, Hasan, Jafar, Cheng, Han-Hao, Ramarishna, Seeram and Yarlagadda, Prasad KDV. 2021. "A systematic approach towards biomimicry of nanopatterned cicada wings on titanium using electron beam lithography ." Nanotechnology. 32 (6), pp. 1-15. https://doi.org/10.1088/1361-6528/abbeaa
Investigation of correlation between chemical composition and properties of biodiesel using principal component analysis (PCA) and artificial neural network (ANN)
Jahirul, M. I., Rasul, M. G., Brown, R. J., Senadeera, W, Hosen, M. A., Haque, R., Saha, S. C. and Mahlia, T. M. I.. 2021. "Investigation of correlation between chemical composition and properties of biodiesel using principal component analysis (PCA) and artificial neural network (ANN)." Renewable Energy. 168, pp. 632-646. https://doi.org/10.1016/j.renene.2020.12.078
Bactericidal efficiency of micro- and nanostructured surfaces: a critical perspective
Senevirathne, S. W. M. A. I., Hasan, J., Mathew, A., Woodruff, M. and Yarlagadda, P. K. D. V.. 2021. "Bactericidal efficiency of micro- and nanostructured surfaces: a critical perspective ." RSC Advances: an international journal to further the chemical sciences. 11 (3), pp. 1883-1900. https://doi.org/10.1039/d0ra08878a
Enhanced biomechanical performance of additively manufactured Ti-6Al-4V bone plates
Gupta, Saurabh Kumar, Shahidsha, Nagur, Bahl, Sumit, Kedaria, Dhaval, Singamneni, Sarat, Yarlagadda, Prasad K.D.V., Suwas, Satyam and Chatterjee, Kaushik. 2021. "Enhanced biomechanical performance of additively manufactured Ti-6Al-4V bone plates ." Journal of The Mechanical Behavior of Biomedical Materials. 119. https://doi.org/10.1016/j.jmbbm.2021.104552
Plaque Longitudinal Heterogeneity in Morphology, Property, and Mechanobiology
Paritala, Phani Kumari, Yarlagadda, Tejasri, Mendieta, Jessica Benitez, Wang, Jiaqiu, McGahan, Tim, Lloyd, Thomas, Yarlagadda, Prasad K.D.V. and Li, Zhiyong. 2021. "Plaque Longitudinal Heterogeneity in Morphology, Property, and Mechanobiology ." Cerebrovascular Diseases. 50 (5), pp. 510-519. https://doi.org/10.1159/000515690
Single-parameter mechanical design of a 3D-printed octet truss topological scaffold to match natural cancellous bones
Wang, Luping, Chen, Qiang, Yarlagadda, Prasad K.D.V., Zhu, Feipeng, Li, Qiwei and Li, Zhiyong. 2021. "Single-parameter mechanical design of a 3D-printed octet truss topological scaffold to match natural cancellous bones ." Materials and Design. 209. https://doi.org/10.1016/j.matdes.2021.109986
Mechanics of Bacterial Interaction and Death on Nanopatterned Surfaces
Velic, Amar, Hasan, Jafar, Li, Zhiyong and Yarlagadda, Prasad K.D.V.. 2021. "Mechanics of Bacterial Interaction and Death on Nanopatterned Surfaces ." Biophysical Journal. 120 (2), pp. 217-231. https://doi.org/10.1016/j.bpj.2020.12.003
Effects of Nanopillar Size and Spacing on Mechanical Perturbation and Bactericidal Killing Efficiency
Velic, Amar, Jaggessar, Alka, Tesfamichael, Tuquabo, Li, Zhiyong and Yarlagadda, Prasad K. D. V.. 2021. "Effects of Nanopillar Size and Spacing on Mechanical Perturbation and Bactericidal Killing Efficiency ." Nanomaterials. 11 (10). https://doi.org/10.3390/nano11102472
Special issue on the application of artificial intelligence in advanced manufacturing
He, Jingsha, Yarlagadda, Prasad and Zhou, Shengzong. 2020. "Special issue on the application of artificial intelligence in advanced manufacturing." International Journal of Computer Integrated Manufacturing. 33 (10-11), pp. 947-948. https://doi.org/10.1080/0951192X.2020.1843192
An intuitive dashboard for Bayesian Network inference
Reddy, Vikas, Farr, Anna Charisse, Wu, Paul, Mengersen, Kerrie and Yarlagadda, Prasad K. D. V.. 2014. "An intuitive dashboard for Bayesian Network inference." 2nd International Conference on Mathematical Modeling in Physical Sciences (IC-MSQUARE 2013). Prague, Czech Republic 01 - 05 Sep 2013 Bristol, United Kingdom. https://doi.org/10.1088/1742-6596/490/1/012023
Combining Opinions for Use in Bayesian Networks: A Measurement Error Approach
Farr, A. Charisse, Mengersen, Kerrie, Ruggeri, Fabrizio, Simpson, Daniel, Wu, Paul and Yarlagadda, Prasad. 2020. "Combining Opinions for Use in Bayesian Networks: A Measurement Error Approach." International Statistical Review. 88 (2), pp. 335-353. https://doi.org/10.1111/insr.12350
Performance of Graphite-Dispersed Li2CO3-K2CO3 Molten Salt Nanofluid for a Direct Absorption Solar Collector System
Karim, M. A., Islam, Majedul, Arthur, Owen and Yarlagadda, Prasad KDV. 2020. "Performance of Graphite-Dispersed Li2CO3-K2CO3 Molten Salt Nanofluid for a Direct Absorption Solar Collector System ." Molecules. 25 (2), pp. 1-26. https://doi.org/10.3390/molecules25020375
Stress-Relaxation and Cyclic Behavior of Human Carotid Plaque Tissue
Paritala, Paritala, Yarlagadda, Prasad K. D. V., Kansky, Rhys, Wang, Jiaqiu, Mendieta, Jessica Benitez, Gu, YuanTong, McGahan, Tim, Lloyd, Thomas and Li, Zhiyong. 2020. "Stress-Relaxation and Cyclic Behavior of Human Carotid Plaque Tissue ." Frontiers in Bioengineering and Biotechnology. 8. https://doi.org/10.3389/fbioe.2020.00060
Modelling the growth of hydrothermally synthesised bactericidal nanostructures, as a function of processing conditions
Jaggessar, Alka and Yarlagadda, Prasad K.D.V.. 2020. "Modelling the growth of hydrothermally synthesised bactericidal nanostructures, as a function of processing conditions ." Materials Science and Engineering C: Materials for Biological Applications. 108. https://doi.org/10.1016/j.msec.2019.110434
A Framework for Sharing Staff between Outbound and Inbound Airport Processes
Alodhaibi, Sultan, Burdett, Robert L. and Yarlagadda, Prasad K.D.V.. 2020. "A Framework for Sharing Staff between Outbound and Inbound Airport Processes ." Mathematics. 8 (6). https://doi.org/10.3390/math8060895
A multi commodity flow model incorporating flow reduction functions
Bevrani, Bayan, Burdett, Robert L., Bhaskar, Ashish and Yarlagadda, Prasad K. D. V.. 2020. "A multi commodity flow model incorporating flow reduction functions." Flexible Services and Manufacturing Journal. 32 (3), pp. 693-723. https://doi.org/10.1007/s10696-019-09349-4
A tool to minimize the need of Monte Carlo ray tracing code for 3D finite volume modelling of a standard parabolic trough collector receiver under a realistic solar flux profile
Islam, Majedul, Saha, Suvash C., Yarlagadda, Prasad K. D. V. and Karim, Azharul. 2020. "A tool to minimize the need of Monte Carlo ray tracing code for 3D finite volume modelling of a standard parabolic trough collector receiver under a realistic solar flux profile ." Energy Science and Engineering. 8 (9), pp. 3087-3102. https://doi.org/10.1002/ese3.741
An Analytical Optimisation Framework for Airport Terminal Capacity Expansion
Alodhaibi, Sultan, Burdett, Robert L. and Yarlagadda, Prasad K. D. V.. 2020. "An Analytical Optimisation Framework for Airport Terminal Capacity Expansion ." Complexity. 2020, pp. 1-10. https://doi.org/10.1155/2020/2976281
Antiviral Nanostructured Surfaces Reduce the Viability of SARS-CoV-2
Hasan, Jafar, Pyke, Alyssa, Nair, Neelima, Yarlagadda, Tejasri, Will, Geoffrey, Spann, Kirsten and Yarlagadda, Prasad K.D.V.. 2020. "Antiviral Nanostructured Surfaces Reduce the Viability of SARS-CoV-2 ." ACS Biomaterials Science and Engineering. 6 (9), pp. 4858-4861. https://doi.org/10.1021/acsbiomaterials.0c01091
Antiviral and Antibacterial Nanostructured Surfaces with Excellent Mechanical Properties for Hospital Applications
Hasan, Jafar, Xu, Yanan, Yarlagadda, Tejasri, Schuetz, Michael, Spann, Kirsten and Yarlagadda, Prasad KDV. 2020. "Antiviral and Antibacterial Nanostructured Surfaces with Excellent Mechanical Properties for Hospital Applications ." ACS Biomaterials Science and Engineering. 6 (6), pp. 3608-3618. https://doi.org/10.1021/acsbiomaterials.0c00348
A multi-criteria multi-commodity flow model for analysing transportation networks
Bevrani, Bayan, Burdett, Robert, Bhaskar, Ashish and Yarlagadda, Prasad K.D.V.. 2020. "A multi-criteria multi-commodity flow model for analysing transportation networks ." Operations Research Perspectives. 7, pp. 1-19. https://doi.org/10.1016/j.orp.2020.100159
Investigation of failure mechanisms of nacre at macro and nano scales
Jingyu, L., Xu, Y., Hong, Y., Liu, Y., Yarlagadda, P. and Yan, C.. 2020. "Investigation of failure mechanisms of nacre at macro and nano scales ." Journal of The Mechanical Behavior of Biomedical Materials. 112, pp. 1-7. https://doi.org/10.1016/j.jmbbm.2020.104018
Wayfinding: a simple concept, a complex process
Farr, Anna Charisse, Kleinschmidt, Tristan, Yarlagadda, Prasad and Mengersen, Kerrie. 2012. "Wayfinding: a simple concept, a complex process." Transport Reviews. 32 (6), pp. 715-743. https://doi.org/10.1080/01441647.2012.712555
Impact of Passenger-Arrival Patterns in Outbound Processes of Airports
Alodhaibi, Sultan, Burdett, Robert L. and Yarlagadda, Prasad K.D.V.. 2019. "Impact of Passenger-Arrival Patterns in Outbound Processes of Airports ." 14th Global Congress on Manufacturing and Management (GCMM 2018). Brisbane, Australia 05 - 07 Dec 2018 Netherlands. Elsevier. https://doi.org/10.1016/j.promfg.2019.02.046
Multi-biofunctional properties of three species of cicada wings and biomimetic fabrication of nanopatterned titanium pillars
Shahali, Hesam, Hasan, Jafar, Mathew, Asha, Wang, Hongxia, Yan, Cheng, Tesfamichael, Tuquabo, Yarlagadda, Prasad K. D. V. and Murray, P.. 2019. "Multi-biofunctional properties of three species of cicada wings and biomimetic fabrication of nanopatterned titanium pillars." Journal of Materials Chemistry B. 7 (8), pp. 1300-1310. https://doi.org/10.1039/c8tb03295e
Bacteria Death and Osteoblast Metabolic Activity Correlated to Hydrothermally Synthesised TiO2 Surface Properties
Jaggessar, Alka, Mathew, Asha, Tesfamichael, Tuquabo, Wang, Hongxia, Yan, Cheng and Yarlagadda, Prasad KDV. 2019. "Bacteria Death and Osteoblast Metabolic Activity Correlated to Hydrothermally Synthesised TiO2 Surface Properties ." Molecules. 24 (7). https://doi.org/10.3390/molecules24071201
Evaluation of Particle Beam Lithography for Fabrication of Metallic Nano-structures
Shahali, Hesam, Hasan, Jafar, Wang, Hongxia, Tesfamichael, Tuquabo, Yan, Cheng and Yarlagadda, Prasad K.D.V.. 2019. "Evaluation of Particle Beam Lithography for Fabrication of Metallic Nano-structures ." 14th Global Congress on Manufacturing and Management (GCMM 2018). Brisbane, Australia 05 - 07 Dec 2018 Netherlands. Elsevier. https://doi.org/10.1016/j.promfg.2019.02.038
Parametric Study on Nanopattern Bactericidal Activity
Velic, Amar, Tesfamichael, Tuquabo, Li, Zhiyong and Yarlagadda, Prasad K.D.V.. 2019. "Parametric Study on Nanopattern Bactericidal Activity ." 14th Global Congress on Manufacturing and Management (GCMM 2018). Brisbane, Australia 05 - 07 Dec 2018 Netherlands. Elsevier. https://doi.org/10.1016/j.promfg.2019.02.072
Manufacturing of a parabolic trough concentrating collector test rig and a “LASER-Screen” technique for measuring actual focal length and light interceptance of the collector
Islam, Majedul, Mohiuddin, Sadi, Limon, Amir Hamza, Faruque, Md Omar and Yarlagadda, Prasad K.D.V.. 2019. "Manufacturing of a parabolic trough concentrating collector test rig and a “LASER-Screen” technique for measuring actual focal length and light interceptance of the collector ." 14th Global Congress on Manufacturing and Management (GCMM 2018). Brisbane, Australia 05 - 07 Dec 2018 Netherlands. Elsevier. https://doi.org/10.1016/j.promfg.2019.02.056
Vertical Segregation: Issues and Challenges of Women Engineers in Australia
Sharma, Jyoti, Yarlagadda, Tejasri, Sharma, Sarthak and Yarlagadda, Prasad K.D.V.. 2019. "Vertical Segregation: Issues and Challenges of Women Engineers in Australia ." 14th Global Congress on Manufacturing and Management (GCMM 2018). Brisbane, Australia 05 - 07 Dec 2018 Netherlands. Elsevier. https://doi.org/10.1016/j.promfg.2019.02.074
Recent Developments in the Field of Nanotechnology for Development of Medical Implants
Yarlagadda, Tejasri, Sharma, Sarthak, Yarlagadda, Prasad K.D.V. and Sharma, Jyoti. 2019. "Recent Developments in the Field of Nanotechnology for Development of Medical Implants ." 14th Global Congress on Manufacturing and Management (GCMM 2018). Brisbane, Australia 05 - 07 Dec 2018 Netherlands. Elsevier. https://doi.org/10.1016/j.promfg.2019.02.077
A flexible job shop scheduling approach with operators for coal export terminals
Burdett, Robert L., Corry, Paul, Yarlagadda, Prasad K.D.V., Eustace, Colin and Smith, Simon. 2019. "A flexible job shop scheduling approach with operators for coal export terminals ." Computers and Operations Research. 104, pp. 15-36. https://doi.org/10.1016/j.cor.2018.11.019
Mimicking Insect Wings: The Roadmap to Bioinspiration
Hasan, Jafar, Roy, Anindo, Chatterjee, Kaushik and Yarlagadda, Prasad K. D. V.. 2019. "Mimicking Insect Wings: The Roadmap to Bioinspiration ." ACS Biomaterials Science and Engineering. 5 (7), pp. 3139-3160. https://doi.org/10.1021/acsbiomaterials.9b00217
Control of bacterial attachment by fracture topography
Velic, Amar, Mathew, Asha, Hines, Peter and Yarlagadda, Prasad K.D.V.. 2019. "Control of bacterial attachment by fracture topography ." Journal of The Mechanical Behavior of Biomedical Materials. 91, pp. 416-424. https://doi.org/10.1016/j.jmbbm.2018.10.020
Scene Invariant Virtual Gates Using DNNs
Denman, Simon, Fookes, Clinton, Yarlagadda, Prasad K. D. V. and Sridharan, Sridha. 2019. "Scene Invariant Virtual Gates Using DNNs." IEEE Transactions on Circuits and Systems for Video Technology. 29 (9), pp. 2637-2651. https://doi.org/10.1109/TCSVT.2018.2874649
Mg–Phenolic Network Strategy for Enhancing Corrosion Resistance and Osteocompatibility of Degradable Magnesium Alloys
Asgari, Mohammad, Yang, Ying, Yang, Shuang, Yu, Zhentao, Yarlagadda, Prasad K. D. V., Xiao, Yin and Li, Zhiyong. 2019. "Mg–Phenolic Network Strategy for Enhancing Corrosion Resistance and Osteocompatibility of Degradable Magnesium Alloys ." ACS Omega. 4 (26), pp. 21931-21944. https://doi.org/10.1021/acsomega.9b02976
Experimental and numerical investigation of the toughening mechanisms in bioinspired composites prepared by freeze casting
Liu, Jingyu, Bai, Ruixiang, Lei, Zhenkun, Xu, Chun, Ye, Qingsong, Martens, Wayde, Yarlagadda, Prasad KDV and Yan, Cheng. 2019. "Experimental and numerical investigation of the toughening mechanisms in bioinspired composites prepared by freeze casting ." Composites Science and Technology. 182. https://doi.org/10.1016/j.compscitech.2019.107768
Model-based fault diagnosis and prognosis of dynamic systems: a review
Ekanayake, Thushara, Dewasurendra, Devapriya, Abeyratne, Sunil, Ma, Lin and Yarlagadda, Prasad. 2019. "Model-based fault diagnosis and prognosis of dynamic systems: a review." 14th Global Congress on Manufacturing and Management (GCMM 2018). Brisbane, Australia 05 - 07 Dec 2018 Elsevier. https://doi.org/10.1016/j.promfg.2019.02.060
CFD study of heat transfer enhancement and fluid flow characteristics of turbulent flow through tube with twisted tape inserts
Tusar, Mehedi, Norman, Abdullah, Islam, Majedul, Yarlagadda, Prasad and Salam, Bodius. 2019. "CFD study of heat transfer enhancement and fluid flow characteristics of turbulent flow through tube with twisted tape inserts." 2nd International Conference on Energy and Power (ICEP 2018). Sydney, Australia 13 - 15 Dec 2018 Netherlands. Elsevier. https://doi.org/10.1016/j.egypro.2019.02.188
Effect of the Orientation Schemes of the Energy Collection Element on the Optical Performance of a Parabolic Trough Concentrating Collector
Islam, Majedul, Yarlagadda, Prasad and Karim, Azharul. 2019. "Effect of the Orientation Schemes of the Energy Collection Element on the Optical Performance of a Parabolic Trough Concentrating Collector." Energies. 12 (1), pp. 1-20. https://doi.org/10.3390/en12010128
Inorganic p-type semiconductors and carbon materials based hole transport materials for perovskite solar cells
Yang, Yang, Pham, Ngoc Duy, Yao, Disheng, Zhu, Huaiyong, Yarlagadda, Prasad and Wang, Hongxia. 2018. "Inorganic p-type semiconductors and carbon materials based hole transport materials for perovskite solar cells." Chinese Chemical Letters. 29 (8), pp. 1242-1250. https://doi.org/10.1016/j.cclet.2018.05.008
Mechanical, bactericidal and osteogenic behaviours of hydrothermally synthesised TiO2 nanowire arrays
Jaggessar, Alka, Mathew, Asha, Wang, Hongxia, Tesfamichael, Tuquabo, Yan, Cheng and Yarlagadda, Prasad KDV. 2018. "Mechanical, bactericidal and osteogenic behaviours of hydrothermally synthesised TiO2 nanowire arrays ." Journal of The Mechanical Behavior of Biomedical Materials. 80, pp. 311-319. https://doi.org/10.1016/j.jmbbm.2018.02.011
Numerical investigation of atherosclerotic plaque rupture using optical coherence tomography imaging and XFEM
Paritala, Phani Kumari, Yarlagadda, Prasad K.D.V., Wang, Jiaqiu, Gu, YuanTong and Li, Zhiyong. 2018. "Numerical investigation of atherosclerotic plaque rupture using optical coherence tomography imaging and XFEM ." Engineering Fracture Mechanics. 204, pp. 531-541. https://doi.org/10.1016/j.engfracmech.2018.11.002
Determining of Poisson’s Ratio and Young’s Modulus of Pumpkin Tissue- Using Laser Measurement Sensors
Shirmohammadi, Maryam and Yarlagadda, Prasad K.D.V.. 2018. "Determining of Poisson’s Ratio and Young’s Modulus of Pumpkin Tissue- Using Laser Measurement Sensors ." Materials Today: Proceedings. 5 (5), pp. 11507-11515. https://doi.org/10.1016/j.matpr.2018.02.118
Perspectives of ‘STEM education and policies’ for the development of a skilled workforce in Australia and India
Sharma, Jyoti and Yarlagadda, Prasad KDV. 2018. "Perspectives of ‘STEM education and policies’ for the development of a skilled workforce in Australia and India ." International Journal of Science Education. 40 (16), pp. 1999-2022. https://doi.org/10.1080/09500693.2018.1517239
Factors Influencing the Success of Culturally and Linguistically Diverse Students in Engineering and Information Technology
Yarlagadda, Prasad KDV, Sharma, Jyoti, Silva, Pujitha, Woodman, Karen, Pitchforth, Jegar and Mengersen, Kerrie. 2018. "Factors Influencing the Success of Culturally and Linguistically Diverse Students in Engineering and Information Technology." International Journal of Engineering Education. 34 (4), pp. 1384-1399.
Fabrication of Nano Pyramid Texture on Ti-6Al-4V Using Nanosphere Lithography
Jaggessar, Alka, Yarlagadda, Prasad, Qiu, Tengfei, Li, Tong and Tesfamichael, Tuquabo. 2018. "Fabrication of Nano Pyramid Texture on Ti-6Al-4V Using Nanosphere Lithography." 1st International Conference on Materials Manufacturing (ICMMM 2017) and Modelling. Amsterdam, Netherlands 09 - 11 Mar 2017 Elsevier. https://doi.org/10.1016/j.matpr.2018.02.128
A new constitutive analysis of hexagonal close-packed metal in equal channel angular pressing by crystal plasticity finite element method
Li, Hejie, Ochsner, Andreas, Yarlagadda, Prasad K. D. V., Xiao, Yin, Furushima, Tsuyoshi, Wei, Dongbin, Jiang, Zhengyi and Manabe, Ken-ichi. 2018. "A new constitutive analysis of hexagonal close-packed metal in equal channel angular pressing by crystal plasticity finite element method." Continuum Mechanics and Thermodynamics. 30 (1), pp. 69-82. https://doi.org/10.1007/s00161-017-0583-9
Editorial
Yarlagadda, Prasad KDV, Paritala, Phani Kumari and Velic, Amar. 2018. "Editorial." Australian Journal of Mechanical Engineering. 16, pp. 1-1. https://doi.org/10.1080/14484846.2018.1546982
A capacity assessment approach for multi-modal transportation systems
Bevrani, Bayan, Burdett, Robert L., Bhaskar, Ashish and Yarlagadda, Prasad K.D.V.. 2017. "A capacity assessment approach for multi-modal transportation systems ." European Journal of Operational Research. 263 (3), pp. 864-878. https://doi.org/10.1016/j.ejor.2017.05.007
Investigation of the Effect of Physical and Optical Factors on the Optical Performance of a Parabolic Trough Collector
Islam, Majedul, Miller, Sarah, Yarlagadda, Prasad and Karim, Azharul. 2017. "Investigation of the Effect of Physical and Optical Factors on the Optical Performance of a Parabolic Trough Collector." Energies. 10 (11), pp. 1-19. https://doi.org/10.3390/en10111907
Bio-mimicking nano and micro-structured surface fabrication for antibacterial properties in medical implants
Jaggessar, Alka, Shahali, Hesam, Mathew, Asha and Yarlagadda, Prasad K. D. V.. 2017. "Bio-mimicking nano and micro-structured surface fabrication for antibacterial properties in medical implants ." Journal of Nanobiotechnology. 15, pp. 1-20. https://doi.org/10.1186/s12951-017-0306-1
Finite element modeling of mechanical loading pumpkin peel and flesh
Shirmohammadi, Maryam and Yarlagadda, Prasad K. D. V.. 2017. "Finite element modeling of mechanical loading pumpkin peel and flesh." International Journal of Food Engineering. 13 (5). https://doi.org/10.1515/ijfe-2016-0004
SPH-DEM approach to numerically simulate the deformation of three‑dimensional RBCs in non‑uniform capillaries
Polwaththe-Gallage, Hasitha-Nayanajith, Saha, Suvash C., Sauret, Emily, Flower, Robert, Senadeera, Wijitha and Gu, YuanTong. 2016. "SPH-DEM approach to numerically simulate the deformation of three‑dimensional RBCs in non‑uniform capillaries." BioMedical Engineering OnLine. 15 (2 (Supplement)), pp. 349-370. https://doi.org/10.1186/s12938-016-0256-0
Remaining useful life prediction of rotating equipment using covariate-based hazard models – Industry applications
Gorjian, Nima, Sun, Yong, Ma, Lin, Yarlagadda, Prasad and Mittinty, Murthy. 2017. "Remaining useful life prediction of rotating equipment using covariate-based hazard models – Industry applications ." Australian Journal of Mechanical Engineering. 15 (1), pp. 36-45. https://doi.org/10.1080/14484846.2015.1093251
Estimating life cycle cost for a product family design: The challenges
Suteja, T. J., Karim, A., Yarlagadda, P. K. D. V. and Yan, C.. 2017. "Estimating life cycle cost for a product family design: The challenges." 1st International Conference on Informatics, Technology and Engineering (INCITE 2017). Indonesia 24 - 25 Aug 2017 United Kingdom. IOP Publishing. https://doi.org/10.1088/1757-899X/273/1/012026
A Case Study of the Iranian National Railway and its Absolute Capacity Expansion using Analytical Models
Bevrani, Bayan, Burdett, Robert and Yarlagadda, Prasad, K. D. V.. 2017. "A Case Study of the Iranian National Railway and its Absolute Capacity Expansion using Analytical Models." Transport. 32 (4), pp. 398-414. https://doi.org/10.3846/16484142.2015.1099053
Framework for Airport Outbound Passenger Flow Modelling
Alodhaibi, Sultan, Burdett, Robert L. and Yarlagadda, Prasad KDV.. 2017. "Framework for Airport Outbound Passenger Flow Modelling." 13th Global Congress on Manufacturing and Management (GCMM 2016). Zhengzhou, China 28 - 30 Nov 2016 Netherlands. Elsevier. https://doi.org/10.1016/j.proeng.2017.01.263
Recent Advances in Manufacturing and Surface Modification of Titanium Orthopaedic Applications
Shahali, Hesam, Jaggessar, Alka and Yarlagadda, Prasad KDV. 2017. "Recent Advances in Manufacturing and Surface Modification of Titanium Orthopaedic Applications." 13th Global Congress on Manufacturing and Management (GCMM 2016). Zhengzhou, China 28 - 30 Nov 2016 Netherlands. Elsevier. https://doi.org/10.1016/j.proeng.2017.01.259
Digital manufacturing- applications past, current, and future trends
Paritala, Phani Kumari, Manchikatla, Shalini and Yarlagadda, Prasad K.D.V.. 2017. "Digital manufacturing- applications past, current, and future trends." 13th Global Congress on Manufacturing and Management (GCMM 2016). Zhengzhou, China 28 - 30 Nov 2016 Netherlands. https://doi.org/10.1016/j.proeng.2017.01.250
Quantification of cephalomedullary nail fit in the femur using 3D computer modelling: a comparison between 1.0 and 1.5m bow designs
Schmutz, Beat, Amarathunga, Jayani, Kmiec, Stanley Jr., Yarlagadda, Prasad and Schuetz, Michael. 2016. "Quantification of cephalomedullary nail fit in the femur using 3D computer modelling: a comparison between 1.0 and 1.5m bow designs." Journal of Orthopaedic Surgery and Research. 11, pp. 1-7. https://doi.org/10.1186/s13018-016-0389-7
Can we safely deform a plate to fit every bone? Population-based fit assessment and finite element deformation of a distal tibial plate
Harith, Hazreen, Schmutz, Beat, Malekani, Javad, Schuetz, Michael A. and Yarlagadda, Prasad K.. 2016. "Can we safely deform a plate to fit every bone? Population-based fit assessment and finite element deformation of a distal tibial plate ." Medical Engineering and Physics. 38 (3), pp. 280-285. https://doi.org/10.1016/j.medengphy.2015.11.012
A method for optimal fit of patient-specific fracture fixation plates
Harith, Hazreen, Malekani, Javad, Schmutz, Beat, Schuetz, Michael and Yarlagadda, Prasad KDV. 2016. "A method for optimal fit of patient-specific fracture fixation plates ." Proceedings of the Institution of Mechanical Engineers Part L: Journal of Materials, Design and Applications. 230 (1), pp. 282-290. https://doi.org/10.1177/1464420715569586
Investigation on Temperature-Dependent Electrical Conductivity of Carbon Nanotube/Epoxy Composites for Sustainable Energy Applications
Njuguna, Michael K., Galpaya, Dilini, Yan, Cheng, Colwell, Colwell, Will, Geoffrey, Hu, Ning, Yarlagadda, Prasad and Bell, John M.. 2015. "Investigation on Temperature-Dependent Electrical Conductivity of Carbon Nanotube/Epoxy Composites for Sustainable Energy Applications." Journal of Nanoscience and Nanotechnology. 15 (9), pp. 6957-6964. https://doi.org/10.1166/jnn.2015.10514
Pedestrian Dynamics in Real and Simulated World
Ma, Wenbo and Yarlagadda, P. K. D. V.. 2015. "Pedestrian Dynamics in Real and Simulated World ." Journal of Urban Planning and Development. 141 (3), pp. 1-15. https://doi.org/10.1061/(ASCE)UP.1943-5444.0000232
A constitutive model for mechanical response characterization of pumpkin peel and flesh tissues under tensile and compressive loadings
Shirmohammadi, Maryam, Yarlagadda, Prasad K. D. V. and Gu, YuanTong. 2015. "A constitutive model for mechanical response characterization of pumpkin peel and flesh tissues under tensile and compressive loadings ." Journal of Food Science and Technology. 52 (8), pp. 4874-4884. https://doi.org/10.1007/s13197-014-1605-2
Comprehensive Contribution of Filament Thickness and Crosslinker Failure to the Rheological Property of F-actin Cytoskeleton
Li, Tong, Liu, Ling, Hu, Dean, Oloyede, Adekunle, Xiao, Yin, Yarlagadda, Prasad and Gu, YuanTong. 2015. "Comprehensive Contribution of Filament Thickness and Crosslinker Failure to the Rheological Property of F-actin Cytoskeleton." Cellular and Molecular Bioengineering. 8 (2), pp. 278-284. https://doi.org/10.1007/s12195-015-0382-y
Is there a bone-nail specific entry point? Automated fit quantification of tibial nail designs during the insertion for six different nail entry points
Amarathunga, J.P., Schuetz, M. A., Yarlagadda, K.V.D. and Schmutz, B.. 2015. "Is there a bone-nail specific entry point? Automated fit quantification of tibial nail designs during the insertion for six different nail entry points ." Medical Engineering and Physics. 37 (4), pp. 367-374. https://doi.org/10.1016/j.medengphy.2015.01.012
Trans-scale Granular Modelling of Cytoskeleton: a Mini-Review
Li, Tong, Yarlagadda, Prasad K. D. V., Oloyede, Adekunle, Thibbotuwawa, Namal and Gu, YuanTong. 2015. "Trans-scale Granular Modelling of Cytoskeleton: a Mini-Review." Molecular and Cellular Biomechanics. 12 (1), pp. 17-35. https://doi.org/10.3970/mcb.2015.012.017
Is there a difference between supervising international and domestic graduate students in engineering and IT?
Woodman, Karen and Yarlagadda, Prasad KDV. 2015. "Is there a difference between supervising international and domestic graduate students in engineering and IT? " 7th International Conference on Education and New Learning Technologies (EDULEARN 15). Barcelona, Spain 06 - 08 Jul 2015 Spain. International Association of Technology, Education and Development (IATED).
Automated fit quantification of tibial nail designs during the insertion using computer three-dimensional modelling
Amarathunga, Jayani P, Schuetz, Michael A., Yarlagadda, Prasad KVD and Schmutz, Beat. 2014. "Automated fit quantification of tibial nail designs during the insertion using computer three-dimensional modelling ." Proceedings of the Institution of Mechanical Engineers Part H: Journal of Engineering in Medicine. 228 (12), pp. 1227-1234. https://doi.org/10.1177/0954411914561246
Bacterial adherence and biofilm formation on medical implants: A review
Veerachamy, Suganthan, Yarlagadda, Tejasri, Manivasagam, Geetha and Yarlagadda, Prasad K. D. V.. 2014. "Bacterial adherence and biofilm formation on medical implants: A review." Proceedings of the Institution of Mechanical Engineers Part H: Journal of Engineering in Medicine. 228 (10), pp. 1083-1099. https://doi.org/10.1177/0954411914556137
Tensile properties of Si nanowires with faulted stacking layers
Zhan, Haifei, Gu, Yuantong, Yan, Cheng and Yarlagadda, Prasad K. D. V.. 2014. "Tensile properties of Si nanowires with faulted stacking layers." Science of Advanced Materials. 6 (7), pp. 1489-1492. https://doi.org/10.1166/sam.2014.1800
Molecular investigation of the mechanical properties of single actin filaments based on vibration analyses
Li, Tong, Gu, Y. T., Oloyede, Adekunle and Yarlagadda, Prasad K. D. V.. 2014. "Molecular investigation of the mechanical properties of single actin filaments based on vibration analyses." Computer Methods in Biomechanics and Biomedical Engineering: Imaging and Visualization. 17 (6), pp. 616-622. https://doi.org/10.1080/10255842.2012.706279
Multiview Gait Biometrics for Human Identity Recognition
Chetty, Girija, Yarlagadda, Prasad, Madasu, Vamsi and Mishra, Anurag. 2014. "Multiview Gait Biometrics for Human Identity Recognition." 2014 International Conference on Computing for Sustainable Global Development . New Delhi, India 05 - 07 Mar 2014 India. IEEE.
Importance of Knowledge Management Processes in a Project-based organization: a Case Study of Research Enterprise
Sokhanvar, Shahram, Mathews, Judy and Yarlagadda, Prasad. 2014. "Importance of Knowledge Management Processes in a Project-based organization: a Case Study of Research Enterprise." 12th Global Congress on Manufacturing and Management (GCMM 2014). India 08 - 10 Dec 2014 Elsevier. https://doi.org/10.1016/j.proeng.2014.12.336
Mechanics of Polyropylene-Seed-Coat-Fibres Composites AndPolyropylene - Wood Fibres Composites-A Comparative Study
Devasahayam, Sheila and Yarlagadda, Prasad. 2014. "Mechanics of Polyropylene-Seed-Coat-Fibres Composites AndPolyropylene - Wood Fibres Composites-A Comparative Study." 12th Global Congress on Manufacturing and Management (GCMM 2014). India 08 - 10 Dec 2014 Netherlands. Elsevier. https://doi.org/10.1016/j.proeng.2014.12.345
A Novel Iterative Method for Simulating Patient-Specific Optimal Deformation and Fit of Fracture Fixation Plates
Harith, H. H., Malekani, J., Schmutz, B., Schuetz, M. and Yarlagadda, P. K. D. V.. 2014. "A Novel Iterative Method for Simulating Patient-Specific Optimal Deformation and Fit of Fracture Fixation Plates." 1st International Materials, Industrial, and Manufacturing Engineering Conference (MIMEC 2013). Malaysia 04 - 06 Dec 2013 Scientific.Net. https://doi.org/10.4028/www.scientific.net/AMR.845.382
An Activity and Resource Advisory System for Manufacturing Process Chains Selection at the Early Stage of Product Development
The, Jaya Suteja, Yarlagadda, Prasad K. D. V., Karim, Azharul and Yan, Cheng. 2014. "An Activity and Resource Advisory System for Manufacturing Process Chains Selection at the Early Stage of Product Development." 3rd International Conference on Materials and Products Manufacturing Technology (ICMPMT 2013). China 25 - 26 Sep 2013 Scientific.Net. https://doi.org/10.4028/www.scientific.net/AMR.834-836.1927
How to increase the accuracy of analysis and reduce the computational time in ANSYS in the case of deformation study of orthopedic bone plates
Malekani, Javad, Yarlagadda, Prasad K. D. V., Schmutz, Beat, Gu, YuanTong and Schuetz, Michael. 2014. "How to increase the accuracy of analysis and reduce the computational time in ANSYS in the case of deformation study of orthopedic bone plates." 3rd International Conference on Materials and Products Manufacturing Technology (ICMPMT 2013). China 25 - 26 Sep 2013 Scientific.Net. https://doi.org/10.4028/www.scientific.net/AMR.834-836.1592
Complete And Competent Engineers:A Coaching Model To Developing Holistic Graduates
Silva, Pujitha and Yarlagadda, Prasad K. D. V.. 2014. "Complete And Competent Engineers:A Coaching Model To Developing Holistic Graduates." 5th World Conference on Educational Sciences (WCES 2013). Italy 05 - 08 Feb 2013 Netherlands. Elsevier. https://doi.org/10.1016/j.sbspro.2014.01.399
Bending properties of Ag nanowires with pre-existing surface defects
Zhan, H. F., Gu, Y. T., Yan, C. and Yarlagadda, P. K. D. V.. 2014. "Bending properties of Ag nanowires with pre-existing surface defects." Computational Materials Science. 81, pp. 45-51. https://doi.org/10.1016/j.commatsci.2013.05.032
Impact of Passenger Group Dynamics on an Airport Evacuation Process Using an Agent-Based Model
Cheng, Lin, Reddy, Vikas, Fookes, Clinton and Yarlagadda, Prasad K. D. V.. 2014. "Impact of Passenger Group Dynamics on an Airport Evacuation Process Using an Agent-Based Model." 2014 International Conference on Computational Science and Computational Intelligence. United States 10 - 13 Mar 2014 United States. IEEE. https://doi.org/10.1109/CSCI.2014.111
Nanoscale Texture on Glass and Titanium Substrates by Physical Vapor Deposition Process
Yarlagadda, Prasad K.D.V., Tesfamichael, Tuquabo, Schuetz, Michael, Valiveti, Lalitsuri and Li, Tong. 2014. "Nanoscale Texture on Glass and Titanium Substrates by Physical Vapor Deposition Process." 12th Global Congress on Manufacturing and Management (GCMM 2014). India 08 - 10 Dec 2014 Netherlands. Elsevier. https://doi.org/10.1016/j.proeng.2014.12.434
Investigating effective wayfinding in airports: a Bayesian Network approach
Farr, Anna Charisse, Kleinschmidt, Tristan, Johnson, Sandra, Yarlagadda, Prasad and Mengersen, Kerrie. 2014. "Investigating effective wayfinding in airports: a Bayesian Network approach." Transport. 29 (1), pp. 90-99. https://doi.org/10.3846/16484142.2014.898695
Studies on bending limitations for the optimal fit of orthopaedic bone plates
Malekani, J., Schmutz, B., Gudimetla, P., Gu, Y., Schuetz, M. and Yarlagadda, Prasad. 2013. "Studies on bending limitations for the optimal fit of orthopaedic bone plates." 2nd International Conference on Materials and Products Manufacturing Technology (ICMPMT 2012). 22 - 23 Sep 2012 Switzerland. https://doi.org/10.4028/www.scientific.net/AMR.602-604.1181
Study of Structural Changes of Pumpkin Tissue Before and After Mechanical Loading
Shirmohammadi, Maryam and Yarlagadda, Prasad K. D. V.. 2013. "Study of Structural Changes of Pumpkin Tissue Before and After Mechanical Loading." 2nd International Conference on Measurement, Instrumentation and Automation (ICMIA 2013). China 23 - 24 Apr 2013 Scientific.Net. https://doi.org/10.4028/www.scientific.net/AMM.333-335.1998
Ethanol sensitivity of thermally evaporated nanostructured WO3 thin films doped and implanted with Fe
Ahsan, M., Ahmad, M. Z., Tesfamichael, T., Bell, J. and Yarlagadda, Prasad K. D. V.. 2013. "Ethanol sensitivity of thermally evaporated nanostructured WO3 thin films doped and implanted with Fe." 2nd International Conference on Measurement, Instrumentation and Automation (ICMIA 2013). China 23 - 24 Apr 2013 Scientific.Net. https://doi.org/10.4028/www.scientific.net/AMM.333-335.1938
Assembly line balancing the comparison of COMSOAL and MSNSH technique in Motorcycle manufacturing company
Lerttira, Areeda and Yarlagadda, Prasad. 2013. "Assembly line balancing the comparison of COMSOAL and MSNSH technique in Motorcycle manufacturing company." 2nd International Conference on Materials and Products Manufacturing Technology (ICMPMT 2012). 22 - 23 Sep 2012 Switzerland. Trans Tech Publications. https://doi.org/10.4028/www.scientific.net/AMR.605-607.166
Hot deformation studies on a low-carbon steel: Part 1 - flow curves and the constitutive relationship
Rao, K. P., Prasad, Y. K. D. V. and Hawbolt, E. B.. 1996. "Hot deformation studies on a low-carbon steel: Part 1 - flow curves and the constitutive relationship." Journal of Materials Processing Technology. 56 (1-4), pp. 897-907. https://doi.org/10.1016/0924-0136(95)01902-2
Hot Deformation Studies on a Low-carbon Steel: Part 2 - An Algorithm for the Flow Stress Determination under Varying Process Conditions
Rao, K. P., Yarlagadda, Y. K. D. V. and Hawbolt, E. B.. 1996. "Hot Deformation Studies on a Low-carbon Steel: Part 2 - An Algorithm for the Flow Stress Determination under Varying Process Conditions." Journal of Materials Processing Technology. 56 (1-4), pp. 908-917. https://doi.org/10.1016/0924-0136(95)01903-0
Neural network approach to flow stress evaluation in hot deformation
Rao, K. P. and Y. K. D. V. Prasad. 1995. "Neural network approach to flow stress evaluation in hot deformation." Journal of Materials Processing Technology. 53 (3-4), pp. 552-566. https://doi.org/10.1016/0924-0136(94)01744-L
A sliding algorithm for optimal nesting of arbitrarily shaped sheet metal blanks
Yarlagadda, Y. K. D. V., Somasundaraswaran, S. and Rao, K. P.. 1995. "A sliding algorithm for optimal nesting of arbitrarily shaped sheet metal blanks." International Journal of Production Research. 33 (6), pp. 1505-1520. https://doi.org/10.1080/00207549508930225