The use of road safety target setting in fatality and injury reduction

Paper


Somasundaraswaran, K., Bullen, F. and Ayers, R.. 2010. "The use of road safety target setting in fatality and injury reduction." 24th Australian Road Research Board Conference (ARRB 2010): Building on 50 Years of Road and Transport Research. Melbourne, Australia 12 - 15 Oct 2010 Melbourne, Australia.
Paper/Presentation Title

The use of road safety target setting in fatality and injury reduction

Presentation TypePaper
AuthorsSomasundaraswaran, K. (Author), Bullen, F. (Author) and Ayers, R. (Author)
Journal or Proceedings TitleProceedings of the 24th Australian Road Research Board Conference (ARRB 2010)
ERA Conference ID42543
Number of Pages12
Year2010
Place of PublicationMelbourne, Australia
ISBN187659263X
Web Address (URL) of Paperhttp://www.arrb.com.au/admin/file/content13/c6/Soma.pdf
Conference/Event24th Australian Road Research Board Conference (ARRB 2010): Building on 50 Years of Road and Transport Research
Australian Road Research Board Annual Conference
Event Details
Australian Road Research Board Annual Conference
Rank
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
Event Details
24th Australian Road Research Board Conference (ARRB 2010): Building on 50 Years of Road and Transport Research
Event Date
12 to end of 15 Oct 2010
Event Location
Melbourne, Australia
Abstract

The World Health Organisation has predicted that over the next twenty years the total annual global road fatalities will increase rapidly with the greatest proportion occurring in low-income countries. An evaluation of the models used for setting road safety targets in sixteen countries revealed the use of different performance indices. The effectiveness of target setting in high
income countries has historically been characterised by a short period of major fatality reduction, followed by longer periods of smaller incremental gains. The intent of the study reported here was to provide an articulated phase approach for improving the road safety of countries with a different historical and economic background to those high income countries studied. It was concluded that while some developed countries are moving towards the phase of
smaller incremental gains road fatalities, most of the Asian developing countries are now at the early stages of road safety initiatives. In this phase sustained commitment from governments for implementation of initiatives, data collection and record keeping, and the capacity development
of key professionals is vital and has greater potential to reduce major injuries and fatalities.

Keywordsroad safety; target setting; Asian developing countries
ANZSRC Field of Research 2020440712. Social policy
440709. Public policy
400512. Transport engineering
Public Notes

Copyright is retained by the authors. It may be reproduced in whole or in part for the purposes of study, research, or review, but is subject to the inclusion of an acknowledgment of the source.

Byline AffiliationsFaculty of Engineering and Surveying
Department of Agricultural, Civil and Environmental Engineering
Institution of OriginUniversity of Southern Queensland
Permalink -

https://research.usq.edu.au/item/q084w/the-use-of-road-safety-target-setting-in-fatality-and-injury-reduction

Download files


Published Version
Som_Bullen_Ayers_POWERPOINT.pdf
File access level: Anyone

  • 2001
    total views
  • 320
    total downloads
  • 6
    views this month
  • 0
    downloads this month

Export as

Related outputs

Comparison of common methods for determining hazardous locations for improving road safety
Al-Marafi, Mohammad Nour and Somasundaraswaran, Kathirgamalingam. 2024. "Comparison of common methods for determining hazardous locations for improving road safety." Transportation Research Interdisciplinary Perspectives. 26. https://doi.org/10.1016/j.trip.2024.101196
Examination of the geometric design parameters contributing to heavy vehicle stability and rollover effects at roundabouts in high-speed areas
Somasundaraswaran, Kathirgamalingam and Arndt, Owen. 2024. Examination of the geometric design parameters contributing to heavy vehicle stability and rollover effects at roundabouts in high-speed areas. Australia. University of Southern Queensland.
The role of spatial configuration on pedestrian walkability in commercial streets: A review of Space Syntax Analysis
Mehrinejad Khotbehsara, Elham and Somasundaraswaran, Kathirgamalingam. 2023. "The role of spatial configuration on pedestrian walkability in commercial streets: A review of Space Syntax Analysis ." Royal Geographical Societies Annual International Conference 2023 (AC2023). London, United Kingdom United Kingdom. https://doi.org/10.17605/OSF.IO/JWAHU
Exploring the Dynamics of Pedestrian Behavior in Crowded Walking Streets: A Conceptual Review of Space Syntax Analysis
Mehrinejad Khotbehsara, Elham and Somasundaraswaran, Kathirgamalingam. 2023. "Exploring the Dynamics of Pedestrian Behavior in Crowded Walking Streets: A Conceptual Review of Space Syntax Analysis." 27th Annual Technological Advances in Science, Medicine, and Engineering Conference (TASME 2023) . Toronto, Canada 01 - 02 Jul 2023 Canada.
A review of the state-of-the-art methods in estimating crash modification factor (CMF)
Al-Marafi, Mohammad Nour and Somasundaraswaran, Kathirgamalingam. 2023. "A review of the state-of-the-art methods in estimating crash modification factor (CMF)." Transportation Research Interdisciplinary Perspectives. 20. https://doi.org/10.1016/j.trip.2023.100839
Investigating the role of spatial configuration on pedestrians' spatial cognition
Mehrinejad, Elham and Somasundaraswaran, Kathirgamalingam. 2022. "Investigating the role of spatial configuration on pedestrians' spatial cognition." 26th Annual Technological Advances in Science, Medicine and Engineering Conference (2022). Toronto, Canada 28 Aug 2022 Toronto, Canada.
Investigating the role of spatial configuration on visitors’ spatial cognition in health-care spaces: case studies in Gilan, Iran
Mehrinejad Khotbehsara, Elham, Safari, Hossein, Askarizad, Reza and Somasundaraswaran, Kathirgamalingam. 2022. "Investigating the role of spatial configuration on visitors’ spatial cognition in health-care spaces: case studies in Gilan, Iran." Facilities. 40 (9-10), pp. 617-637. https://doi.org/10.1108/F-07-2021-0067
The impact of COVID-19 on visitors’ wayfinding within healthcare centers
Mehrinejad Khotbehsara, Elham, Askarizad, Reza, Mehrinejad, Maryam, Nasab, Sara Nourmusavi and Somasundaraswaran, Kathirgamalingam. 2023. "The impact of COVID-19 on visitors’ wayfinding within healthcare centers." Ain Shams Engineering Journal. 14 (5). https://doi.org/10.1016/j.asej.2022.101957
An Investigation into the Use of Ultrasonic Wave Transmission Techniques to Evaluate Air Voids in Asphalt
Zargar, Majid, Banerjee, Sourish, Bullen, Frank and Ayers, Ron. 2018. "An Investigation into the Use of Ultrasonic Wave Transmission Techniques to Evaluate Air Voids in Asphalt." Pradhan, Biswajeet (ed.) 1st Global Civil Engineering Conference (GCEC 2017). Kuala Lumpur, Malaysia 26 - 28 Jul 2017 Singapore. https://doi.org/10.1007/978-981-10-8016-6_103
Experimental and Theoretical Deflections of Hybrid Composite Sandwich Panel under Four-point Bending Load
Fajrin, J., Zhuge, Y., Wang, H. and Bullen, F.. 2017. "Experimental and Theoretical Deflections of Hybrid Composite Sandwich Panel under Four-point Bending Load." Civil Engineering Dimension. 19 (1), pp. 29-35. https://doi.org/10.9744/CED.19.1.29-35
The structural behavior of hybrid structural insulated panels under pure bending load
Fajrin, Jauhar, Zhuge, Yan, Bullen, Frank and Wang, Hao. 2017. "The structural behavior of hybrid structural insulated panels under pure bending load." International Journal of Technology. 8 (5), pp. 777-788. https://doi.org/10.14716/ijtech.v8i5.861
Flexural behaviour of hybrid sandwich panel with natural fiber composites as the intermediate layer
Fajrin, Jauhar, Zhuge, Yan, Bullen, Frank and Wang, Hao. 2016. "Flexural behaviour of hybrid sandwich panel with natural fiber composites as the intermediate layer." Journal of Mechanical Engineering and Sciences. 10 (2), pp. 1968-1983. https://doi.org/10.15282/jmes.10.2.2016.3.0187
Relationship between spatial arrangement and pedestrian’s wayfinding ability
Mehrinejad Khotbehsara, Elham and Somasundaraswaran, Kathirgamalingam. 2022. "Relationship between spatial arrangement and pedestrian’s wayfinding ability." 29th Postgraduate and Early Career Researcher Group Researcher Symposium . Toowooba, Australia 18 - 18 Nov 2022 Australia.
Development of crash modification factors for Intersections in Toowoomba city
Al-Marafi, Mohammad Nour, Somasundaraswaran, Kathirgamalingam and Bullen, Frank. 2021. "Development of crash modification factors for Intersections in Toowoomba city." International Journal of Urban Sciences. 25 (1), pp. 104-123. https://doi.org/10.1080/12265934.2020.1743739
Developing crash modification factors for roundabouts using a cross-sectional method
Al-Marafi, Mohammad Nour, Somasundaraswaran, Kathirgamalingam and Ayers, Ron. 2020. "Developing crash modification factors for roundabouts using a cross-sectional method." Journal of Traffic and Transportation Engineering. 7 (3), pp. 362-374. https://doi.org/10.1016/j.jtte.2018.10.012
Optimisation of signal timing for improving traffic flow on a highway segment using TRANSYT7F
Somasundaraswaran, Kathirgamalingam and Terramsetti, Anoosha. 2019. "Optimisation of signal timing for improving traffic flow on a highway segment using TRANSYT7F." Advances in Transportation Studies. https://doi.org/10.4399/9788255233488
Review of crash prediction models and their applicability in black spot identification to improve road safety
Al-Marafi, Mohammad and Somasundaraswaran, Kathirgamalingam. 2018. "Review of crash prediction models and their applicability in black spot identification to improve road safety." Indian Journal of Science and Technology. 11 (5), pp. 1-7. https://doi.org/10.17485/ijst/2018/v11i5/119291
Experience in the delivery of an engineering capstone design course for Associate Degree program at the University of Southern Queensland
Somasundaraswaran, Kathirgamalingam. 2016. "Experience in the delivery of an engineering capstone design course for Associate Degree program at the University of Southern Queensland." Asia Pacific Journal of Contemporary Education and Communication Technology. 2 (3), pp. 64-73.
Overview of reconstruction and redevelopment of key infrastructure facilities in Galle, Sri Lanka
Somasundaraswaran, A. K., Subashini, W.H., Abeyratne, P.K., Wickramage, W.S. and Thuduwage, A.P.. 2007. "Overview of reconstruction and redevelopment of key infrastructure facilities in Galle, Sri Lanka." Liyanage, M. de S (ed.) 3rd Academic Sessions. Matara, Sri Lanka Dec 2006 Galle, Sri Lanka.
The need for safety targets in south Asian developing countries
Somasundaraswaran, K., Bullen, Frank, Ayers, Ron and Heydecker, Benjamin. 2009. "The need for safety targets in south Asian developing countries." 4th International Road Traffic and Accident Database Conference (IRTAD 2009). Seoul, South Korea 16 - 17 Sep 2009 Paris, France.
Engineering faculties in developing and assessing professional competencies for engineers in Australia
Goh, Steven and Bullen, Frank. 2011. "Engineering faculties in developing and assessing professional competencies for engineers in Australia." Bernardino, Jorge and Quadrado, José Carlos (ed.) 39th SEFI Annual Conference: Global Engineering Recognition, Sustainability and Mobility (SEFI 2011). Lisbon, Portugal 27 - 30 Sep 2011 Lisbon, Portugal.
How engineers become CEOs
Goh, Steven, Coaker, Warren and Bullen, Frank. 2012. "How engineers become CEOs." Engineering Leadership Conference (ELC 2012): Passing the Baton - Engineering Australia's Future. Adelaide, Australia 30 May - 02 Jun 2012 Canberra, Australia.
The impact of photocatalytic on degradation of poly aromatic hydrocarbons through permeable concrete
Bolt, J. R., Zhuge, Y. and Bullen, F.. 2014. "The impact of photocatalytic on degradation of poly aromatic hydrocarbons through permeable concrete." Smith, Scott T. (ed.) 23rd Australasian Conference on the Mechanics of Structures and Materials (ACMSM23). Byron Bay, Australia 09 - 12 Dec 2014 Australia.
Rehabilitation works in Queensland using foamed bituminous stabilisation
Logitharan, Lokanantham R., Somasundaraswaran, Kathirgamalingam and Ramanujam, Jothi M.. 2015. "Rehabilitation works in Queensland using foamed bituminous stabilisation." International Journal of GEOMATE. 8 (16), pp. 1308-1315.
Building long-term capability in the Australian minerals industry – The MINAD project
Ayers, Ron, Dowling, David and Lind, Gavin. 2014. "Building long-term capability in the Australian minerals industry – The MINAD project." Bainbridge-Smith, Andrew, Qi, Ziming Tom and Gupta, Gourab Sen (ed.) 25th Annual Conference of the Australasian Association for Engineering Education (AAEE 2014). Wellington, New Zealand 07 - 10 Dec 2014 Palmerston North, New Zealand.
Analysis of road crashes at roundabout in Toowoomba
Somasundaraswaran, Kathirgamalingam and Russell, Lauren. 2015. "Analysis of road crashes at roundabout in Toowoomba." Conference of ASEAN Road Safety (CARS2015). Kuala Lumpur, Malaysia 03 - 06 Nov 2015 Malaysia.
Improving the quality of experimental research in civil engineering by employing statistical design of experiment: a case study in developing composite hybrid sandwich panel
Fajrin, Jauhar, Zhuge, Yan, Bullen, Frank and Wang, Hao. 2015. "Improving the quality of experimental research in civil engineering by employing statistical design of experiment: a case study in developing composite hybrid sandwich panel." Zulkifli, Fitri Yuli and Suwartha, Nyoman (ed.) 14th International conference on QIR (Quality in Research). Lombok, Indonesia 10 - 13 Aug 2015 Lombok, Indonesia.
Evaluation of strength characteristics of recycled asphalt pavement materials
Neumann, Philip M. and Somasundaraswaran, Kathirgamalingam. 2014. "Evaluation of strength characteristics of recycled asphalt pavement materials." 26th Australian Road Research Board Conference (ARRB 2014): Research Driving Efficiency. Sydney, Australia 19 - 22 Oct 2014 Sydney, Australia.
Recent foamed bituminous stabilisation works in Queensland
Logitharan, Lokanantham, Somasundaraswaran, Kathirgamalingam and Ramanujam, Jothi M.. 2014. "Recent foamed bituminous stabilisation works in Queensland." Hossain, Zakaria and Shiau, Jim (ed.) 4th International Conference on Geotechnique, Construction Materials and Environment (GEOMATE 2014). Brisbane, Australia 19 - 21 Nov 2014 Mie, Japan.
Recent design strategies adapted for foamed bituminous stabilisation in flexible pavement rehabilitation works in Queensland
Logitharan, R. L., Somasundaraswaran, K. and Ramanujam, J. M.. 2015. "Recent design strategies adapted for foamed bituminous stabilisation in flexible pavement rehabilitation works in Queensland." Oka, Fusao, Murakami, Akira, Uzuoka, Ryosuke and Kimoto, Sayuri (ed.) 14th Conference of the International Association for Computer Methods and Recent Advances in Geomechanics (IACMAG 2014). Kyoto, Japan 22 - 25 Sep 2014 London, United Kingdom.
Using fly ash to partially substitute metakaolin in geopolymer synthesis
Zhang, Zuhua, Wang, Hao, Zhu, Yingcan, Reid, Andrew, Provis, John L. and Bullen, Frank. 2014. "Using fly ash to partially substitute metakaolin in geopolymer synthesis." Applied Clay Science. 88-89, pp. 194-201. https://doi.org/10.1016/j.clay.2013.12.025
The safety benefit of wide centerline treatments utilizing audio-tactile line-marking on undivided highways
Whittaker, Adam and Somasundaraswaran, Kathirgamalingam. 2013. "The safety benefit of wide centerline treatments utilizing audio-tactile line-marking on undivided highways." 14th Road Engineering Association of Asia and Australasia Conference (REAAA 2013): The Road Factor in Economic Transformation. Kuala Lumpur, Malaysia 26 - 28 Mar 2013 Kuala Lumpur, Malaysia.
Hybrid sandwich panel with natural fibre composite intermediate layer: manufacturing process and significance analysis
Fajrin, Jauhar, Zhuge, Yan, Bullen, Frank and Wang, Hao. 2013. "Hybrid sandwich panel with natural fibre composite intermediate layer: manufacturing process and significance analysis." Malaysian Journal of Civil Engineering. 25 (Special issue 1), pp. 95-111.
Significance analysis of flexural behaviour of hybrid sandwich panels
Fajrin, Jauhar, Zhuge, Yan, Bullen, Frank and Wang, Hao. 2013. "Significance analysis of flexural behaviour of hybrid sandwich panels." Open Journal of Civil Engineering. 3 (3B), pp. 1-7. https://doi.org/10.4236/ojce.2013.33B001
A mathematical model for complete stress-strain curve prediction of permeable concrete
Hussin, M. K., Zhuge, Y., Bullen, F. and Lokuge, W. P.. 2013. "A mathematical model for complete stress-strain curve prediction of permeable concrete." Samali, Bijan, Attard, Mario M. and Song, Chongmin (ed.) 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM22). Sydney, Australia 11 - 14 Dec 2012 London, United Kingdom.
Putting the 'E' into STEM [Keynote speaker]
Bullen, Frank and Haeusler, Carole. 2010. "Putting the 'E' into STEM [Keynote speaker]." Hudson, Peter, Vinesh, Chandra, King, Donna and Kar-Tin, Lee (ed.) 1st Science, Technology, Engineering and Mathematics in Education Conference (STEM 2010). Brisbane, Australia 26 - 27 Nov 2010 Brisbane, Australia.
Development and traffic flow at Bandaranaike International Airport in Sri Lanka
Somasundaraswaran, K.. 2008. "Development and traffic flow at Bandaranaike International Airport in Sri Lanka." Aerlines.
Quantitative kinetic and structural analysis of geopolymers Part 2. thermodynamics of sodium silicate activation of metakaolin
Zhang, Zuhua, Provis, John L., Wang, Hao, Bullen, Frank and Reid, Andrew. 2013. "Quantitative kinetic and structural analysis of geopolymers Part 2. thermodynamics of sodium silicate activation of metakaolin." Thermochimica Acta. 565, pp. 163-171. https://doi.org/10.1016/j.tca.2013.01.040
An assessment of stress factors on engineering academics in a regional context
Goh, Steven, Zhou, Hong, Bullen, Frank and Davey, Kenneth. 2012. "An assessment of stress factors on engineering academics in a regional context." Leblanc, Richard and Sobel, Ann (ed.) 42nd ASEE/IEEE Frontiers in Education Conference (FIE 2012): Soaring to New Heights in Engineering Education . Seattle, United States 03 - 06 Oct 2012 United States. https://doi.org/10.1109/FIE.2012.6462228
Traffic flow modelling for an urban arterial road in Brisbane City
Al-Nuaimi, Hamdi, Ayers, Ron and Somasundaraswaran, Kathirgamalingam. 2013. "Traffic flow modelling for an urban arterial road in Brisbane City." 14th Road Engineering Association of Asia and Australasia Conference (REAAA 2013): The Road Factor in Economic Transformation. Kuala Lumpur, Malaysia 26 - 28 Mar 2013 Kuala Lumpur, Malaysia.
The effects of improved vehicle technology on the design of acceleration and deceleration lanes at freeway entry and exit ramps
Keys, Jason and Ayers, Ron. 2012. "The effects of improved vehicle technology on the design of acceleration and deceleration lanes at freeway entry and exit ramps." 25th Australian Road Research Board Conference: Shaping the Future: Linking Policy, Rresearch and Outcomes (ARRB 2012) . Perth, Australia 23 - 26 Sep 2012 Melbourne, Australia.
The effectiveness of using variable speed limit on the performance of an interrupted flow
Al-Nuaimi, Hamdi, Ayers, Ron and Somasundaraswaran, Kathirgamalingam. 2012. "The effectiveness of using variable speed limit on the performance of an interrupted flow." Chen, B. M., Khan, M. T. and Tan, K. -K (ed.) IASTED International Conference on Engineering and Applied Science (EAS 2012): Applications for the 21st Century. Colombo, Sri Lanka 27 - 29 Dec 2012 Calgary, Canada. https://doi.org/10.2316/P.2012.785-065
Quantitative kinetic and structural analysis of geopolymers. Part 1. The activation of metakaolin with sodium hydroxide
Zhang, Zuhua, Wang, Hao, Provis, John L., Bullen, Frank, Reid, Andrew and Zhu, Yingcan. 2012. "Quantitative kinetic and structural analysis of geopolymers. Part 1. The activation of metakaolin with sodium hydroxide." Thermochimica Acta. 539, pp. 23-33. https://doi.org/10.1016/j.tca.2012.03.021
Impact of the application of international quality processes on engineering education at universities in Sri Lanka
Somasundaraswaran, Kathirgamalingam. 2012. "Impact of the application of international quality processes on engineering education at universities in Sri Lanka." Journal of Professional Issues in Engineering Education and Practice. 138 (3), pp. 193-197. https://doi.org/10.1061/(ASCE)EI.1943-5541.0000100
Numerical simulation of porous structure in foam concrete on thermal insulation property
Li, Qiang, Wang, Hao, Bullen, Frank and Reid, Andrew. 2012. "Numerical simulation of porous structure in foam concrete on thermal insulation property ." Jaafar, M, Azura, A. R., Leong, K. H. and Leong, A. Y. L. (ed.) 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today. Kuala Lumpur, Malaysia 06 - 08 Nov 2012 Kowloon, Hong Kong.
Investigation of some fundamental properties of permeable concrete
Hussin, Manal, Zhuge, Yan, Bullen, Frank and Lokuge, Weena. 2012. "Investigation of some fundamental properties of permeable concrete." International Conference on Emerging Materials and Mechanics Applications (ICEMMA 2012):. Hangzhou, China 05 - 06 Feb 2012 Zurich, Switzerland. https://doi.org/10.4028/www.scientific.net/AMR.487.869
New concept for optimal application of natural fibre reinforced plastic (NFRP) in building construction
Fajrin, Jauhar, Zhuge, Yan, Bullen, Frank and Wang, Hao. 2012. "New concept for optimal application of natural fibre reinforced plastic (NFRP) in building construction ." Noor, Norhazilan and Ismail, Mohammad (ed.) 8th Asia Pacific Structural Engineering and Construction Conference and 1st International Conference on Civil Engineering Research (APSEC-ICCER 2012): Sustaining the World with Better Structures and Construction Practice. Surabaya, Indonesia 02 - 04 Oct 2012 Johor, Malaysia.
Development and validation of a regional university's model for community and industry engagement
Gibbings, Peter D. and Bullen, Frank. 2011. "Development and validation of a regional university's model for community and industry engagement." Al-Abdeli, Yasir M. and Lindsay, Euan (ed.) 22nd Annual Conference of the Australasian Association for Engineering Education (AAEE 2011). Fremantle, Australia 05 - 07 Dec 2011 Canberra, Australia.
Developing an engineering education research culture
Brodie, Lyn, Bullen, Frank and Gibbings, Peter. 2011. "Developing an engineering education research culture." Auer, Michael, Al-Zoubi, A. Y. and Tovar, Edmundo (ed.) EDUCON 2011: Learning Environments and Ecosystems in Engineering Education. Amman, Jordan 04 - 06 Apr 2011 United States. https://doi.org/10.1109/EDUCON.2011.5773139
Laboratory evaluation of the stress-strain relationship of permeable concrete
Hussin, Manal, Zhuge, Yan, Bullen, Frank and Lokuge, Weena. 2011. "Laboratory evaluation of the stress-strain relationship of permeable concrete." Advanced Materials Research. 243-24, pp. 3259-3262. https://doi.org/10.4028/www.scientific.net/AMR.243-249.3259
The implementation of statistical inference to study the bending strength of sustainable hybrid sandwich panel composite
Fajrin, Jauhar, Zhuge, Yan, Bullen, Frank and Wang, Hao. 2011. "The implementation of statistical inference to study the bending strength of sustainable hybrid sandwich panel composite." Advanced Materials Research. 250-253, pp. 956-961. https://doi.org/10.4028/www.scientific.net/AMR.250-253.956
Photocatalytic construction materials: an overview of recent developments and their application to permeable concrete
Bolt, J. R., Zhuge, Y. and Bullen, F.. 2011. "Photocatalytic construction materials: an overview of recent developments and their application to permeable concrete." Fragomeni, Sam, Venkatesan, Srikanth, Lam, Nelson T. K. and Setunge, Sujeeva (ed.) 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM 21). Melbourne, Australia 07 - 10 Dec 2010 Leiden, Netherlands. https://doi.org/10.1201/b10571-149
Flexural strength of sandwich panel with lignocellulosic composites intermediate layer: a statistic approach
Fajrin, Jauhar, Zhuge, Yan, Bullen, Frank and Wang, Hao. 2011. "Flexural strength of sandwich panel with lignocellulosic composites intermediate layer: a statistic approach." International Journal of Protective Structures. 2 (4), pp. 453-464. https://doi.org/10.1260/2041-4196.2.4.453
The effect of titanium dioxide addition on the hydraulic and mechanical properties of permeable concrete
Bolt, Jason, Zhuge, Yan and Bullen, Frank. 2011. "The effect of titanium dioxide addition on the hydraulic and mechanical properties of permeable concrete." Wyche, J. (ed.) 25th Biennial Conference of the Concrete Institute of Australia (Concrete 2011): Building a Sustainable Future. Perth, Australia 12 - 14 Oct 2011 Perth, Australia.
Effective evaluation strategies to meet global accreditation requirements
Brodie, Lyn, Bullen, Frank and Jolly, Lesley. 2011. "Effective evaluation strategies to meet global accreditation requirements." Kellogg, Stuart and Karlin, Jennifer (ed.) 41st ASEE/IEEE Frontiers in Education Conference (FIE 2011): Celebrating 41 Years of Monumental Innovations from around the World. Rapid City, United States 12 - 15 Oct 2011 Piscataway, NJ, United States. https://doi.org/10.1109/FIE.2011.6142793
The construction of undergraduate student engineering design teams using the MTBI and Belbin Test
Bullen, Frank and Wood, David. 2006. "The construction of undergraduate student engineering design teams using the MTBI and Belbin Test." Rowe, Gerard and Reid, Gillian (ed.) 17th Annual Conference of the Australasian Association for Engineering Education (AAEE 2006). Auckland, New Zealand 10 - 13 Dec 2006 Melbourne, Australia.
Connecting teaching and research through problem based learning in thermal and automotive engineering
Al-Abdeli, Yasir and Bullen, Frank. 2006. "Connecting teaching and research through problem based learning in thermal and automotive engineering." Rowe, Gerard and Reid, Gillian (ed.) 17th Annual Conference of the Australasian Association for Engineering Education (AAEE 2006). Auckland, New Zealand 10 - 13 Dec 2006 Melbourne, Australia.
The role of the first year engineering experience (FYEE) course
Bullen, Frank and Knight, Daniel. 2005. "The role of the first year engineering experience (FYEE) course." World Transactions on Engineering and Technology Education. 4 (2), pp. 219-223.
The broad and strategic value of the freshmen engineering experience-FEE*
Bullen, Frank and Knight, Daniel. 2006. "The broad and strategic value of the freshmen engineering experience-FEE*." International Journal of Engineering Education. 22 (6), pp. 1241-1251.
Diversification of engineering management studies in enriching the learning experience for the 21st century global engineer
Goh, Steven and Bullen, Frank. 2009. "Diversification of engineering management studies in enriching the learning experience for the 21st century global engineer." Kestell, Colin, Grainger, Steven and Cheung, John (ed.) 20th Annual Conference for the Australasian Association of Engineering Education (AAEE 2009). Adelaide, Australia 06 - 09 Dec 2009 Adelaide, Australia.
An overview of engineering education in Sri Lanka
Somasundaraswaran, Kathirgamalingam. 2009. "An overview of engineering education in Sri Lanka." Kestell, Colin, Grainger, Steven and Cheung, John (ed.) 20th Annual Conference for the Australasian Association of Engineering Education (AAEE 2009). Adelaide, Australia 06 - 09 Dec 2009 Adelaide, Australia.
Developing a national design competition through collaborative partnerships
Bullen, Frank, Webb, Elizabeth and Brodie, Lyn. 2007. "Developing a national design competition through collaborative partnerships." Zehner, Robert and Reidsema, Carl (ed.) ConnectED 2007: International Conference on Design Education. Sydney, Australia 09 - 12 Jul 2007 Sydney, Australia.
A fair dinkum approach to fibre composites in civil engineering
Van Erp, Gerard, Cattell, Craig and Ayers, Stephen R.. 2006. "A fair dinkum approach to fibre composites in civil engineering ." Construction and Building Materials. 20 (1-2), pp. 2-10. https://doi.org/10.1016/j.conbuildmat.2005.06.044
The road safety: a special sign for unfamiliar drivers
Somasundaraswaran, Kathirgamalingam. 2010. "The road safety: a special sign for unfamiliar drivers." Goh, Steven C. and Wang, Hao (ed.) 2010 Southern Region Engineering Conference (SREC 2010). Toowoomba, Australia 11 - 12 Nov 2010 Toowoomba, Australia.
Evaluation - the driver of the engineering education machine
Bullen, Frank. 2010. "Evaluation - the driver of the engineering education machine." Gardner, Anne and Jolly, Lesley (ed.) 21st Annual Conference for the Australasian Association of Engineering Education (AAEE 2010). Sydney, Australia 05 - 08 Dec 2010 Sydney, Australia.
Engineering management education post GFC and Copenhagen: are we on the right track?
Goh, Steven and Bullen, Frank. 2010. "Engineering management education post GFC and Copenhagen: are we on the right track?" Richards, Larry (ed.) 40th ASEE/IEEE Frontiers in Education Conference (FIE 2010): Celebrating 40 Years of Innovation. Washington, United States 27 - 30 Oct 2010 San Diego, CA. United States. https://doi.org/10.1109/FIE.2010.5673628
Leading engineering learning and teaching in Australia
Bullen, Frank, Gibbings, Peter and Brodie, Lyn. 2010. "Leading engineering learning and teaching in Australia." Richards, Larry (ed.) 40th ASEE/IEEE Frontiers in Education Conference (FIE 2010): Celebrating 40 Years of Innovation. Washington, United States 27 - 30 Oct 2010 United States. https://doi.org/10.1109/FIE.2010.5673342
Addressing difficulties in rural estates with limited education facilities: a research study for uplifting social harmony
Ranasinghe, R. H. C. C. and Somasundaraswaran, A. K.. 2006. "Addressing difficulties in rural estates with limited education facilities: a research study for uplifting social harmony." Liyanage, M. de. S. (ed.) Third Academic Sessions, University of Ruhuna. Galle, Sri Lanka Dec 2005 Galle, Sri Lanka.
A proposed learning journey for the 21st century global engineering manager: an Australian perspective
Goh, S., Bullen, F. and Gibbings, P.. 2009. "A proposed learning journey for the 21st century global engineering manager: an Australian perspective." Jaafari, Ali (ed.) APES 2009: Managing Projects, Programs and Ventures in Times of Uncertainty and Disruptive Change. Sydney, Australia 19 - 20 Nov 2009 Sydney, Australia.
Self-reported differences between crash-involved and non-crash-involved three-wheeler drivers in Sri Lanka
Somasundaraswaran, A. K. and Tay, Richard. 2006. "Self-reported differences between crash-involved and non-crash-involved three-wheeler drivers in Sri Lanka." IATSS Research. 30 (1), pp. 68-72.
A biomimicry approach to automating visual road surveys
Ng, S. K., Carter, S. J. B. and Bullen, Frank. 2006. "A biomimicry approach to automating visual road surveys." 22nd ARRB Conference: Research Into Practice. Canberra, Australia 29 Oct - 02 Nov 2006 Canberra, Australia.
A coherent-tactile approach to teaching manufacturing engineering
Al-Abdeli, Yasir and Bullen, Frank. 2005. "A coherent-tactile approach to teaching manufacturing engineering." Radcliffe, David and Humphries, Josh (ed.) 4th ASEE/AaeE Global Colloquium on Engineering Education. Sydney, Australia 26 - 29 Sep 2005 Brisbane, Australia.
A problem based / experiential learning approach to teaching maintenance engineering
Al-Abdeli, Yasir and Bullen, Frank. 2005. "A problem based / experiential learning approach to teaching maintenance engineering." Radcliffe, David and Humphries, Josh (ed.) 4th ASEE/AaeE Global Colloquium on Engineering Education. Sydney, Australia 26 - 29 Sep 2005 Brisbane, Australia.
Evaluation of level of service for transfer passengers at airports
de Barros, Alexandre G., Somasundaraswaran, Kathirgamalingam and Wirasinghe, S. C.. 2007. "Evaluation of level of service for transfer passengers at airports." Journal of Air Transport Management. 13 (5), pp. 293-298. https://doi.org/10.1016/j.jairtraman.2007.04.004
Developing multi-discipline design skills in undergraduates
Bullen, Frank, Sargison, Jane and McCulloch, John. 2004. "Developing multi-discipline design skills in undergraduates." American Society for Engineering Education Annual Conference & Exposition (ASEE 2004): Engineering Education Reaches New Heights . Salt Lake City, United States 20 - 23 Jun 2004 Washington, DC, United States.
Accident statistics in Sri Lanka
Somasundaraswaran, Kathirgamalingam. 2006. "Accident statistics in Sri Lanka." IATSS Research. 30 (1), pp. 115-117.
Use of coral-derived aggregates for construction of low-volume roads
Bullen, Frank. 2003. "Use of coral-derived aggregates for construction of low-volume roads." Transportation Research Record. 1819, pp. 134-142. https://doi.org/10.3141/1819b-17
Design and construction of low-cost, low-volume roads in Australia
Bullen, Frank. 2003. "Design and construction of low-cost, low-volume roads in Australia ." Transportation Research Record. 1819 , pp. 173-179. https://doi.org/10.3141/1819b-22
Work in progress: a novel method of creating an academic content repository
Phythian, Mark, Taylor, Jim, Reushle, Shirley, Harris, Glenn, Kist, Alexander A. and Ayers, Ron. 2009. "Work in progress: a novel method of creating an academic content repository." Budny, Dan (ed.) 39th ASEE/IEEE Frontiers in Education Conference (FIE 2009): Imagining and Engineering Future CSET Education. San Antonio, United States 18 - 21 Oct 2009 Piscataway, NJ. United States. https://doi.org/10.1109/FIE.2009.5350874
Results of surveys among drivers and customers of for-hire three-wheelers in five small towns in Sri Lanka
Somasundaraswaran, A. K.. 2008. "Results of surveys among drivers and customers of for-hire three-wheelers in five small towns in Sri Lanka." Asia Pacific Development Journal. 15 (1), pp. 119-135.
Management education for the 21st century engineering manager: an Australian perspective
Goh, Steven, Coaker, Warren and Bullen, Frank. 2008. "Management education for the 21st century engineering manager: an Australian perspective." 38th ASEE/IEEE Frontiers in Education Conference (FIE 2008): Racing Toward Innovation in Engineering Education. Saratoga Springs, United States 22 - 25 Oct 2008 Hoboken, NJ. United States. https://doi.org/10.1109/FIE.2008.4720275
Developing a track model for testing the road pavement under repeated moving surface loads
Shiau, Jim S., Perumal, Tagarajan, Benjamin, Michael, Pather, Selvan and Ayers, Ron. 2006. "Developing a track model for testing the road pavement under repeated moving surface loads." 22nd ARRB Conference: Research Into Practice. Canberra, Australia 29 Oct - 02 Nov 2006 Canberra, Australia.
Developing physical models for geotechnical teaching and research
Shiau, Jim S., Pather, Selvan and Ayers, Ron. 2006. "Developing physical models for geotechnical teaching and research." Ng, C. W. W., Zhang, L. M. and Wang, Y. H. (ed.) 6th International Conference on Physical Modelling in Geotechnics. Hong Kong, China 04 - 06 Aug 2006 Hong Kong.
Prioritisation of guardrail remedial works
Anderson, Troy and Ayers, Ron. 2006. "Prioritisation of guardrail remedial works." 22nd ARRB Conference: Research Into Practice. Canberra, Australia 29 Oct - 02 Nov 2006 Canberra, Australia.
Use of online discussion groups to increase student understanding of global social and technical issues
Ayers, Ron. 2005. "Use of online discussion groups to increase student understanding of global social and technical issues." Radcliffe, David and Humphries, Josh (ed.) 4th ASEE/AaeE Global Colloquium on Engineering Education. Sydney, Australia 26 - 29 Sep 2005 Brisbane, Australia.