The effect of the width and number of gaps on the characteristics of swirl flow induced naturally inside split channel using hot air inlet

Article


Al Atresh, Safia R., Sharifian, Ahmad S. and Wandel, Andrew P.. 2014. "The effect of the width and number of gaps on the characteristics of swirl flow induced naturally inside split channel using hot air inlet." International Journal of Materials, Mechanics and Manufacturing. 2 (4), pp. 339-344. https://doi.org/10.7763/IJMMM.2014.V2.153
Article Title

The effect of the width and number of gaps on the characteristics of swirl flow induced naturally inside split channel using hot air inlet

Article CategoryArticle
AuthorsAl Atresh, Safia R., Sharifian, Ahmad S. and Wandel, Andrew P.
Journal TitleInternational Journal of Materials, Mechanics and Manufacturing
Journal Citation2 (4), pp. 339-344
Number of Pages6
Year2014
Place of PublicationSingapore
Digital Object Identifier (DOI)https://doi.org/10.7763/IJMMM.2014.V2.153
Web Address (URL)http://www.ijmmm.org/index.php?m=content&c=index&a=show&catid=33&id=188
Abstract

Split channels are commonly employed in research
laboratories to generate fire whirls. The purpose of this
computational study is to investigate the effects of the width and number of side gaps on the performance of the split channel when hot air enters at the base of the channel instead of using a fire. Three cylindrical channels are modeled. The first channel includes two identical slots, the second channel has only one gap
with a width double that of the first channel, and the third channel comprises one gap identical to that of the first channel. Comparisons between the results of the first and the second channel provide the assessment of the impacts of the number of gaps on the performance of the split channel. Moreover, the comparison between the results of the second and third channels shows the effect of changing the width of the gap. The combined (overall) effects of the number and the width of the gaps on the characteristics of the flow within the channel are
also evaluated by comparing the results of the first and the third channel. The results show that increasing the number of the slots without increasing the total area of the gaps leads to an increase in centerline vorticity within the channel. In addition, the inlet velocity of hot air from the base and entrainment ratio decreases with the increase of the number of the side slots.
Increasing the width of the gap without changing the number of the slots reduces the entrainment velocity, the inlet velocity, but the entrainment mass flow rate and centerline vorticity increase.
The entrainment mass flow rate centerline vorticity and
entrainment ratio increases by the increase in the number of identical gaps and the increase of gap width whereas the entrainment velocity and the inlet velocity decrease.

KeywordsSplit channel, number of gaps, width of gap, entrainment velocity.
ANZSRC Field of Research 2020401204. Computational methods in fluid flow, heat and mass transfer (incl. computational fluid dynamics)
Public Notes

c. 2014 International Association of Computer Science and Information Technology (IACSIT).

Byline AffiliationsComputational Engineering and Science Research Centre
Institution of OriginUniversity of Southern Queensland
Permalink -

https://research.usq.edu.au/item/q2zz7/the-effect-of-the-width-and-number-of-gaps-on-the-characteristics-of-swirl-flow-induced-naturally-inside-split-channel-using-hot-air-inlet

  • 1754
    total views
  • 13
    total downloads
  • 0
    views this month
  • 0
    downloads this month

Export as

Related outputs

Design of short Venturi flow meters for incompressible and isothermal flow applications
Wells, Keith and Sharifian, Ahmad. 2024. "Design of short Venturi flow meters for incompressible and isothermal flow applications." Heliyon. 10 (7). https://doi.org/10.1016/j.heliyon.2024.e29311
Performance Assessment of ISO-5167 and Symmetrical Venturi Meters for Measuring Low Reynolds Number Turbulent Incompressible Isothermal Flow
Sharifian-Barforoush, Ahmad and Wells, Keith. 2024. "Performance Assessment of ISO-5167 and Symmetrical Venturi Meters for Measuring Low Reynolds Number Turbulent Incompressible Isothermal Flow ." International Journal of Thermofluids. 22. https://doi.org/10.1016/j.ijft.2024.100598
Influence of Natural Gas and Hydrogen Properties on Internal Combustion Engine Performance, Combustion, and Emissions: A Review
Algayyim, Sattar Jabbar Murad, Saleh, Khalid, Wandel, Andrew P, Fattah, Islam Md Rizwanul, Yusaf, Talal and Alrazen, Hayder A.. 2024. "Influence of Natural Gas and Hydrogen Properties on Internal Combustion Engine Performance, Combustion, and Emissions: A Review." Fuel: the science and technology of fuel and energy. 632. https://doi.org/10.1016/j.fuel.2023.130844
Effect of Upward Inclination Angle on Flow Energy Loss in Symmetrical and Asymmetrical Venturi Meters for Single-Phase Incompressible Isothermal Low Reynolds Number Turbulent Flows
Sharifian, Ahmad and Wells, Keith. 2023. "Effect of Upward Inclination Angle on Flow Energy Loss in Symmetrical and Asymmetrical Venturi Meters for Single-Phase Incompressible Isothermal Low Reynolds Number Turbulent Flows." Gongcheng Kexue yu Jishu. 55 (9), pp. 4077-4092.
Proof that all dissipation rates are only functions of time for transported joint-normal distributions
Wandel, Andrew P.. 2023. "Proof that all dissipation rates are only functions of time for transported joint-normal distributions." Physics of Fluids. 35 (4). https://doi.org/10.1063/5.0142876
Sugarcane Biomass as a Source of Biofuel for Internal Combustion Engines (Ethanol and Acetone-Butanol-Ethanol): A Review of Economic Challenges
Algayyim, Sattar Jabbar Murad, Yusaf, Talal, Hamza, Naseer H., Wandel, Andrew P., Fattah, I. M. Rizwanul, Laimon, Mohamd and Rahman, S. M. Ashrafur. 2022. "Sugarcane Biomass as a Source of Biofuel for Internal Combustion Engines (Ethanol and Acetone-Butanol-Ethanol): A Review of Economic Challenges." Energies. 15 (22), pp. 1-17. https://doi.org/10.3390/en15228644
Effect of Inlet Pressure, Size and Wind Speed of an Evaporator on Amount of Refrigerant Charge and Performance of a Portable Propane Air Conditioner
Tangalajuk Siang, Jeri and Sharifian, Ahmad. 2018. "Effect of Inlet Pressure, Size and Wind Speed of an Evaporator on Amount of Refrigerant Charge and Performance of a Portable Propane Air Conditioner." 4th International Conference on Science and Technology (ICST 2018). Yogyakarta, Indonesia 07 - 08 Aug 2018 New York, United States. https://doi.org/10.1109/ICSTC.2018.8528623
Quantifying the Effectiveness of a Mesh in Mitigating Burning Capabilities of Firebrand Shower
Sharifian, Ahmad and Du Preez, Matthew. 2022. "Quantifying the Effectiveness of a Mesh in Mitigating Burning Capabilities of Firebrand Shower." Fire. 5 (5), pp. 1-18. https://doi.org/10.3390/fire5050150
Performance and emission levels of butanol, acetone-butanol-ethanol, butanol-acetone/diesel blends in a diesel engine
Algayyim, Sattar Jabbar Murad and Wandel, Andrew P.. 2022. "Performance and emission levels of butanol, acetone-butanol-ethanol, butanol-acetone/diesel blends in a diesel engine." Biofuels. 13 (4), pp. 449-459. https://doi.org/10.1080/17597269.2020.1759178
A Method for Solving Two-Stream Mixing using the Generalised Binomial-Langevin Multiple Mapping Conditioning Model
du Preez, Matthew, Wandel, Andrew P. and Lindstedt, R. Peter. 2021. "A Method for Solving Two-Stream Mixing using the Generalised Binomial-Langevin Multiple Mapping Conditioning Model." Klimekno, Alexander Y., Wandel, Andrew P., Lu, Yuanshen, Jacobs, Carolyn, Jahn, Ingo, Knibbe, Ruth, Rudolph, Victor, Shukla, Pradeep, Veeraragavan, Anand and Wheatley, Vincent (ed.) Australian Combustion Symposium 2021. Toowoomba, Australia 21 - 24 Nov 2021 Toowoomba, Australia.
A review of the water desalination systems integrated with renewable energy
Alkaisi, Ahmed, Mossad, Ruth and Sharifian-Barforoush, Ahmad. 2017. "A review of the water desalination systems integrated with renewable energy." Energy Procedia. 110, pp. 268-274. https://doi.org/10.1016/j.egypro.2017.03.138
A Multi-Objective Methodology for Selecting Lean Initiatives in Modular Construction Companies
Shams Bidhendi, Saba, Goh, Steven and Wandel, Andrew. 2018. "A Multi-Objective Methodology for Selecting Lean Initiatives in Modular Construction Companies." World Academy of Science, Engineering and Technology (Industrial and Manufacturing Engineering). 12 (9), pp. 1254-1266. https://doi.org/10.5281/zenodo.1474713
Experimental investigation of iso-butanol-acetone (BA) and diesel blend as an alternative fuel for CI engines
Algayyim, S. J. M. and Wandel, A. P.. 2021. "Experimental investigation of iso-butanol-acetone (BA) and diesel blend as an alternative fuel for CI engines." Klimenko, Alexander Y., Wandel, Andrew P., Lu, Yuanshen, Jacobs, Carolyn, Jahn, Ingo, Knibbe, Ruth, Rudolph, Victor, Shukla, Pradeep, Veeraragavan, Anand and Wheatley, Vincent (ed.) Australian Combustion Symposium 2021. Toowoomba, Australia 21 - 24 Nov 2021 Australia.
Two-Phase Flow Development of R134a in a Horizontal Pipe: Computational Investigation
Mahmood, Raid A., Saleh, Khalid, Musa, Veyan A., Massoud, Enass, Sharifian-Barforoush, Ahmad and Abdulkareem, Lokman A.. 2021. "Two-Phase Flow Development of R134a in a Horizontal Pipe: Computational Investigation." International Journal of Heat and Technology (Calore e Tecnologia). 39 (5), pp. 1532-1540. https://doi.org/10.18280/ijht.390515
Spray simulation of diesel fuel under different ambient pressures and temperatures
Algayyim, Sattar Jabbar Murad, Wandel, Andrew P. and Al-Manea, Ahmed Razzaq Hasan. 2021. "Spray simulation of diesel fuel under different ambient pressures and temperatures." Al-Manea, Ahmed Razzaq Hasan (ed.) 2nd International Conference on Engineering and Science (ICES2021). Al-Samawa, Iraq 26 - 27 May 2021 United States. AIP Publishing. https://doi.org/10.1063/5.0069087
Parametric sensitivities of the generalized binomial Langevin–multiple mapping conditioning model
du Preez, Matthew, Wandel, Andrew P., Bontch-Osmolovskaia, D. and Lindstedt, R. Peter. 2021. "Parametric sensitivities of the generalized binomial Langevin–multiple mapping conditioning model." Physics of Fluids. 33 (4), pp. 1-18. https://doi.org/10.1063/5.0041351
Macroscopic and microscopic characteristics of biofuel spray (biodiesel and alcohols) in CI engines: A review
Algayyim, Sattar Jabbar Murad and Wandel, Andrew P.. 2021. "Macroscopic and microscopic characteristics of biofuel spray (biodiesel and alcohols) in CI engines: A review." Fuel: the science and technology of fuel and energy. 292, pp. 1-14. https://doi.org/10.1016/j.fuel.2021.120303
CFD numerical and experimental investigation of two-phase flow development after an expansion device in a horizontal pipe
Mahmood, Raid Ahmed, Buttsworth, David, Malpress, Ray and Sharifian-Barforoush, Ahmed. 2021. "CFD numerical and experimental investigation of two-phase flow development after an expansion device in a horizontal pipe." Journal of Thermal Engineering. 7 (1), pp. 307- 323. https://doi.org/10.18186/thermal.850672
Comparative assessment of spray behavior, combustion and engine performance of ABE-biodiesel/diesel as fuel in DI diesel engine
Algayyim, Sattar Jabbar Murad and Wandel, Andrew P.. 2020. "Comparative assessment of spray behavior, combustion and engine performance of ABE-biodiesel/diesel as fuel in DI diesel engine." Energies. 13 (24), pp. 1-12. https://doi.org/10.3390/en13246521
Studying the effects of using two types of Afos on the ankle and knee joints kinematics and kinetics during walking in the sagittal plane for a patient with severe DDH; Part 2
Alrikabi, Redha, Chong, Albert and Sharifian, Ahmad. 2020. "Studying the effects of using two types of Afos on the ankle and knee joints kinematics and kinetics during walking in the sagittal plane for a patient with severe DDH; Part 2." International Journal of Materials, Mechanics and Manufacturing. 8 (3), pp. 148-154. https://doi.org/10.18178/ijmmm.2020.8.3.498
Studying the effects of using two types of Afos on the hip joint kinematics and kinetics during walking in the sagittal plane for a patient with severe DDH; Part 1
Alrikabi, Redha, Chong, Albert and Sharifian, Ahmad. 2020. "Studying the effects of using two types of Afos on the hip joint kinematics and kinetics during walking in the sagittal plane for a patient with severe DDH; Part 1." International Journal of Materials, Mechanics and Manufacturing. 8 (2), pp. 40-45. https://doi.org/10.18178/ijmmm.2020.8.2.481
Potential Application of Wire Woven Mesh as Tower Packing Support-Computational Approach
Ebrahiminejad, Vahid and Sharifian Barforoush, Ahmad. 2020. "Potential Application of Wire Woven Mesh as Tower Packing Support-Computational Approach." 22nd International Conference on Composite Materials (ICCM-22). Melbourne, Australia 11 - 16 Aug 2019 Australia.
Effect of inlet manifold water injection on diesel engine performance and emissions
Kafle, Sujit, Wandel, Andrew P. and Al-Lwayzy, Saddam. 2019. "Effect of inlet manifold water injection on diesel engine performance and emissions." Medwell, Paul, Alwahabi, Zeyad, Evans, Michael, Chan, Shaun, Chinnici, Alfonso, Tian, Zhao and Dally, Bassam (ed.) 2019 Australian Combustion Symposium. Adelaide, Australia 04 - 06 Dec 2019 Sydney, Australia.
A Physical Understanding of how Multiple Mapping Conditioning Works
Wandel, Andrew P.. 2019. "A Physical Understanding of how Multiple Mapping Conditioning Works." Medwell, Paul, Alwahabi, Zeyad, Evans, Michael, Chan, Shaun, Chinnici, Alfonso, Tian, Zhao and Dally, Bassam (ed.) 2019 Australian Combustion Symposium. Adelaide, Australia 04 - 06 Dec 2019 Sydney, Australia.
Student perceptions of mathematics readiness from a university preparatory program to undergraduate studies
Robinson, Clare, Galligan, Linda, Hussain, Zanubia, Abdulla, Shahab, Frederiks, Anita and Wandel, Andrew. 2019. "Student perceptions of mathematics readiness from a university preparatory program to undergraduate studies." Adults Learning Mathematics: An International Journal. 14 (2), pp. 6-22.
Comparative study of spray characteristics of butanol, acetonebutanol-ethanol, butanol-acetone/diesel blends
Algayyim, Sattar Jabbar Murad and Wandel, Andrew P.. 2019. "Comparative study of spray characteristics of butanol, acetonebutanol-ethanol, butanol-acetone/diesel blends." Medwell, Paul, Alwahabi, Zeyad, Evans, Michael, Chan, Shaun, Chinnici, Alfonso, Tian, Zhao and Dally, Bassam (ed.) 2019 Australian Combustion Symposium. Adelaide, Australia 04 - 06 Dec 2019
Re-examining the flocculating power of sodium, potassium, magnesium and calcium for a broad range of soils
Zhu, Yingcan, Ali, Aram, Dang, Aaditi, Wandel, Andrew P. and Bennett, John McLean. 2019. "Re-examining the flocculating power of sodium, potassium, magnesium and calcium for a broad range of soils." Geoderma. 352, pp. 422-428. https://doi.org/10.1016/j.geoderma.2019.05.041
Development of a weighted leanness measurement method in modular construction companies
Shams Bidhendi, Saba, Goh, Steven and Wandel, Andrew. 2019. "Development of a weighted leanness measurement method in modular construction companies." Journal of Industrial Engineering International. 15 (4), pp. 603-625. https://doi.org/10.1007/s40092-019-0313-y
A mixture-fraction-based hybrid binomial Langevin-multiple mapping conditioning model
Wandel, Andrew P. and Lindstedt, R. Peter. 2019. "A mixture-fraction-based hybrid binomial Langevin-multiple mapping conditioning model." Proceedings of the Combustion Institute. 37 (2), pp. 2151-2158. https://doi.org/10.1016/j.proci.2018.06.122
Time-averaged heat transfer and vortex shedding of a singular and twin heated bluff bodies in cross flow
Etminan, A., Sharifian, A., Reda, E. and Harun, Z.. 2018. "Time-averaged heat transfer and vortex shedding of a singular and twin heated bluff bodies in cross flow." International Journal of Engineering and Technology(Uae). 7 (3.17 (Special Issue)), pp. 270-276. https://doi.org/10.14419/ijet.v7i3.17.25251
Identification of local extinction and prediction of reignition in a spark-ignited sparse spray flame using data mining
Wandel, Andrew P.. 2018. "Identification of local extinction and prediction of reignition in a spark-ignited sparse spray flame using data mining." Combustion and Flame. 198, pp. 342-355. https://doi.org/10.1016/j.combustflame.2018.09.028
Mixtures of n-butanol and iso-butanol blended with diesel: experimental investigation of combustion characteristics, engine performance and emission levels in a compression ignition engine
Algayyim, Sattar Jabbar Murad, Wandel, Andrew P. and Yusaf, Talal. 2021. "Mixtures of n-butanol and iso-butanol blended with diesel: experimental investigation of combustion characteristics, engine performance and emission levels in a compression ignition engine." Biofuels. 12 (4), pp. 439-448. https://doi.org/10.1080/17597269.2018.1493565
Butanol-acetone mixture blended with cottonseed biodiesel: spray characteristics evolution, combustion characteristics, engine performance and emission
Algayyim, Sattar Jabbar Murad, Wandel, Andrew P., Yusaf, Talal and Al-lwayzy, Saddam. 2019. "Butanol-acetone mixture blended with cottonseed biodiesel: spray characteristics evolution, combustion characteristics, engine performance and emission." Proceedings of the Combustion Institute. 37 (4), pp. 4729-4739. https://doi.org/10.1016/j.proci.2018.08.035
Experimental investigation of hydrated butanol-acetone (BA) and diesel blend as alternative fuel for CI engines
Algayyim, Sattar Jabbar Murad, Wandel, Andrew P. and Yusaf, Talal. 2018. "Experimental investigation of hydrated butanol-acetone (BA) and diesel blend as alternative fuel for CI engines." 37th International Symposium on Combustion. Dublin, Ireland 29 Jul - 03 Aug 2018 Pittsburgh, PA, United States.
Numerical investigation into natural gas–diesel dual-fuel engine configuration
Jing, Baocong and Wandel, Andrew P.. 2017. "Numerical investigation into natural gas–diesel dual-fuel engine configuration." Masri, A. R., Cleary, M., Dunn, M., Kourmatzis, A., Hawkes, E., Kook, S. and Chan, Q. N. (ed.) 11th Asia-Pacific Conference on Combustion. Sydney, Australia 10 - 14 Dec 2017 Australia.
Mixture-fraction based hybrid binomial-langevin–MMC modelling applied to auto-ignition in vitiated flow
Wandel, Andrew P. and Lindstedt, R. Peter. 2017. "Mixture-fraction based hybrid binomial-langevin–MMC modelling applied to auto-ignition in vitiated flow." Masri, A. R., Cleary, M., Dunn, M., Kourmatzis, A., Hawkes, E., Kook, S. and Chan, Q. N. (ed.) 11th Asia-Pacific Conference on Combustion. Sydney, Australia 10 - 14 Dec 2017 Australia.
Experimental and numerical investigation of spray characteristics of butanol-diesel blends
Algayyim, Sattar Jabbar Murad, Wandel, Andrew P. and Yusaf, Talal. 2017. "Experimental and numerical investigation of spray characteristics of butanol-diesel blends." Masri, A. R., Cleary, M., Dunn, M., Kourmatzis, A., Hawkes, E., Kook, S. and Chan, Q. N. (ed.) 11th Asia-Pacific Conference on Combustion. Sydney, Australia 10 - 14 Dec 2017 Australia.
Experimental study of spray characteristics, engine performance and emission levels of acetone-butanol-ethanol mixture-diesel blends in a diesel engine
Algayyim, Sattar Jabbar Murad, Wandel, Andrew, Yusaf, Talal, Hamawand, Ihsan and Al-lwayzy, Saddam. 2017. "Experimental study of spray characteristics, engine performance and emission levels of acetone-butanol-ethanol mixture-diesel blends in a diesel engine." Masri, A. R., Cleary, M., Dunn, M., Kourmatzis, A., Hawkes, E., Kook, S. and Chan, Q. N. (ed.) 11th Asia-Pacific Conference on Combustion. Sydney, Australia 10 - 14 Dec 2017 Australia.
The effect of butanol-acetone mixture-cottonseed biodiesel blend on spray characteristics, engine performance and emissions in diesel engine
Algayyim, Sattar Jabbar Murad, Wandel, Andrew P. and Yusaf, Talal. 2017. "The effect of butanol-acetone mixture-cottonseed biodiesel blend on spray characteristics, engine performance and emissions in diesel engine." Masri, A. R., Cleary, M., Dunn, M., Kourmatzis, A., Hawkes, E., Kook, S. and Chan, Q. N. (ed.) 11th Asia-Pacific Conference on Combustion. Sydney, Australia 10 - 14 Dec 2017 Australia.
Numerical investigation of nanofluid laminar forced convective heat transfer inside an equilateral triangular tube
Etminan, Amin, Harun, Zambri and Sharifian, Ahmad. 2017. "Numerical investigation of nanofluid laminar forced convective heat transfer inside an equilateral triangular tube." 2016 International Conference on Environmental Engineering and Sustainable Development (CEESD 2016) . Sanya, China 09 - 11 Dec 2016 Bristol, England. IOP Publishing. https://doi.org/10.1088/1755-1315/51/1/012002
The impact of injector hole diameter on spray behaviour for butanol-diesel blends
Algayyim, Sattar Jabbar Murad, Wandel, Andrew P. and Yusaf, Talal. 2018. "The impact of injector hole diameter on spray behaviour for butanol-diesel blends." Energies. 11 (5), pp. 1298-1310. https://doi.org/10.3390/en11051298
Impact of butanol-acetone mixture as a fuel additive on diesel engine performance and emissions
Algayyim, Sattar Jabbar Murad, Wandel, Andrew P., Yusaf, Talal, Al-Lwayzy, Saddam and Hamawand, Ihsan. 2018. "Impact of butanol-acetone mixture as a fuel additive on diesel engine performance and emissions." Fuel: the science and technology of fuel and energy. 227, pp. 118-126. https://doi.org/10.1016/j.fuel.2018.04.091
Production and application of ABE as a biofuel
Algayyim, Sattar Jabbar Murad, Wandel, Andrew P., Yusaf, Talal and Hamawand, Ihsan. 2018. "Production and application of ABE as a biofuel." Renewable and Sustainable Energy Reviews. 82, pp. 1195-1214. https://doi.org/10.1016/j.rser.2017.09.082
The impact of n-butanol and iso-butanol as components of butanol-acetone (BA) mixture-diesel blend on spray, combustion characteristics, engine performance and emission in direct injection diesel engine
Algayyim, Sattar Jabbar Murad, Wandel, Andrew P., Yusaf, Talal and Hamawand, Ihsan. 2017. "The impact of n-butanol and iso-butanol as components of butanol-acetone (BA) mixture-diesel blend on spray, combustion characteristics, engine performance and emission in direct injection diesel engine." Energy. 140, pp. 1074-1086. https://doi.org/10.1016/j.energy.2017.09.044
Wind tunnel experiments on effects of woven wire screens and buffer zones in mitigating risks associated with firebrand showers
Sharifian, Ahmad and Hashempour, Javad. 2020. "Wind tunnel experiments on effects of woven wire screens and buffer zones in mitigating risks associated with firebrand showers." Australian Journal of Mechanical Engineering. 18 (2), pp. 156-168. https://doi.org/10.1080/14484846.2018.1447225
Impact of butanol-acetone mixture as an oxygenated fuel additive to diesel fuel on diesel engine performance and emissions
Algayyim, Sattar, Wandel, Andrew, Yusaf, Talal, Hamawand, Ihsan and Al-lwayzy, Saddam. 2016. "Impact of butanol-acetone mixture as an oxygenated fuel additive to diesel fuel on diesel engine performance and emissions." 36th International Symposium on Combustion. Seoul, Korea 31 Jul - 05 Aug 2016
The experimental investigation of butanol-diesel blend on engine performance and emission levels in DI diesel engine
Algayyim, Sattar, Wandel, Andrew P., Yusaf, Talal, Hamawand, Ihsan and Al-lwayzy, Saddam. 2017. "The experimental investigation of butanol-diesel blend on engine performance and emission levels in DI diesel engine." 1st MoHESR and HCED Iraq Scholars Conference in Australasia 2017 (ISCA 2017). Melbourne, Australia 05 - 06 Dec 2017 Melbourne, Australia.
Performance of a single-duct portable propane air conditioning system under different refrigerant charge levels
Tangalajuk Siang, Jeri and Sharifian, Ahmad. 2017. "Performance of a single-duct portable propane air conditioning system under different refrigerant charge levels." Heat Transfer. 46 (8), pp. 1246-1261. https://doi.org/10.1002/htj.21271
Effective factors on the performance of woven wire screens against leaf firebrand attacks
Hashempour, Javad and Sharifian, Ahmad. 2017. "Effective factors on the performance of woven wire screens against leaf firebrand attacks." Journal of Fire Sciences. 35 (4), pp. 303-316. https://doi.org/10.1177/0734904117709203
Spreading rate and dispersion behavior of evaporation-suppressant monolayer on open water surfaces: part 2 – under wind stress
Wandel, Andrew P., Brink, Gavin N., Hancock, Nigel H. and Pather, Selvan. 2017. "Spreading rate and dispersion behavior of evaporation-suppressant monolayer on open water surfaces: part 2 – under wind stress." Experimental Thermal and Fluid Science. 87, pp. 171-181. https://doi.org/10.1016/j.expthermflusci.2017.05.006
Spreading rate and dispersion behavior of evaporation-suppressant monolayer on open water surfaces: part 1 – at zero wind stress
Brink, Gavin N., Wandel, Andrew P., Hancock, Nigel H. and Pather, Selvan. 2017. "Spreading rate and dispersion behavior of evaporation-suppressant monolayer on open water surfaces: part 1 – at zero wind stress." Experimental Thermal and Fluid Science. 87, pp. 182-190. https://doi.org/10.1016/j.expthermflusci.2017.05.007
Extending the capillary tube of a propane air-conditioner to reduce the refrigerant charge
Tangalajuk Siang, Jeri and Sharifian, Ahmad. 2017. "Extending the capillary tube of a propane air-conditioner to reduce the refrigerant charge." Energy Procedia. 110, pp. 229-234. https://doi.org/10.1016/j.egypro.2017.03.132
Flow field and performance study of vertical axis Savonius type SST wind turbine
Al-Faruk, Abdullah and Sharifian, Ahmad. 2017. "Flow field and performance study of vertical axis Savonius type SST wind turbine." Energy Procedia. 110, pp. 235-242. https://doi.org/10.1016/j.egypro.2017.03.133
Angular velocity of a combined unloaded Savonius turbine with a vortex inducing chamber: a CFD approach
Al-Faruk, Abdullah and Sharifian, Ahmad. 2012. "Angular velocity of a combined unloaded Savonius turbine with a vortex inducing chamber: a CFD approach." 2012 Southern Regional Engineering Conference (SREC 2012). Toowoomba, Australia 01 Sep 2012 Canberra, Australia.
The study of air fuel ratio for open furnace MILD combustion of biogas on bluff-body burner
Noor, M. M., Wandel, Andrew P. and Yusaf, T. F.. 2012. "The study of air fuel ratio for open furnace MILD combustion of biogas on bluff-body burner." 2012 Southern Regional Engineering Conference (SREC 2012). Toowoomba, Australia 01 Sep 2012 Canberra, Australia.
Work in progress – performance evaluation of online learning tools
Kist, Alexander A. and Wandel, Andrew P.. 2011. "Work in progress – performance evaluation of online learning tools." 41st ASEE/IEEE Frontiers in Education Conference (FIE 2011): Celebrating 41 Years of Monumental Innovations from around the World. Rapid City, United States 12 - 15 Oct 2011 United States. https://doi.org/10.1109/FIE.2011.6143077
Peer review of teamwork for encouraging equal commitment to the group effort
Wandel, Andrew P. and Willey, Keith. 2011. "Peer review of teamwork for encouraging equal commitment to the group effort." Al-Abdeli, Yasir M. and Lindsay, Euan (ed.) 22nd Annual Conference of the Australasian Association for Engineering Education (AAEE 2011). Fremantle, Australia 05 - 07 Dec 2011 Wembley, Western Australia.
Reducing the amount of required propane refrigerant in the condenser of a commercial air-conditioner by increasing the inlet temperature
Tangalajuk Siang, Jeri and Sharifian, Ahmad. 2012. "Reducing the amount of required propane refrigerant in the condenser of a commercial air-conditioner by increasing the inlet temperature." 2012 Southern Regional Engineering Conference (SREC 2012). Toowoomba, Australia 01 Sep 2012 Canberra, Australia.
Potentials of metal mesh to contain bushfires
Hashempour, Javad and Sharifian, Ahmad. 2012. "Potentials of metal mesh to contain bushfires." 2012 Southern Regional Engineering Conference (SREC 2012). Toowoomba, Australia 01 Sep 2012 Canberra, Australia.
The development of MILD combustion open burner experimental setup
Noor, M. M., Wandel, Andrew P. and Yusaf, Talal. 2013. "The development of MILD combustion open burner experimental setup." Ishak, Mahadzir and Rahman, Md. Mustafizur (ed.) 2nd International Conference of Mechanical Engineering Research (ICMER 2013). Pahang, Malaysia 01 - 03 Jul 2013 Pahang, Malaysia.
Detail guide for CFD on the simulation of biogas combustion in bluff-body mild burner
Noor, M. M., Wandel, Andrew P. and Yusaf, Talal. 2013. "Detail guide for CFD on the simulation of biogas combustion in bluff-body mild burner." Ishak, Mahadzir and Rahman, Md. Mustafizur (ed.) 2nd International Conference of Mechanical Engineering Research (ICMER 2013). Pahang, Malaysia 01 - 03 Jul 2013 Pahang, Malaysia.
Mild combustion: the future for lean and clean combustion
Yusaf, Talal, Noor, M. M. and Wandel, Andrew P.. 2013. "Mild combustion: the future for lean and clean combustion." Ishak, Mahadzir and Rahman, Md. Mustafizur (ed.) 2nd International Conference of Mechanical Engineering Research (ICMER 2013). Pahang, Malaysia 01 - 03 Jul 2013 Pahang, Malaysia.
Experimental measurement of direct thermal radiation through single-layer square-cell plain woven screens
Hashempour, Javad, Sharifian, Ahmad and Billingsley, John. 2016. "Experimental measurement of direct thermal radiation through single-layer square-cell plain woven screens." Journal of Heat Transfer: Transactions of the ASME. 138 (1), pp. 012701-1-012701-6. https://doi.org/10.1115/1.4031110
Identification of burning and extinguishing behaviour in spray flames with spark ignition
Baayens, Jocelyn and Wandel, Andrew P.. 2015. "Identification of burning and extinguishing behaviour in spray flames with spark ignition." Yang, Yi and Smith, Nigel (ed.) Australian Combustion Symposium 2015. Melbourne, Australia 07 - 09 Dec 2015 Australia.
Single-zone zero-dimensional model study for diesel-fuelled homogeneous charge compression ignition (HCCI) engines using Cantera
Hairuddin, A. Aziz, Yusaf, Talal and Wandel, Andrew P.. 2016. "Single-zone zero-dimensional model study for diesel-fuelled homogeneous charge compression ignition (HCCI) engines using Cantera." International Journal of Automotive and Mechanical Engineering. 13 (2), pp. 3309-3328. https://doi.org/10.15282/ijame.13.2.2016.3.0275
Numerical simulation of three dimensional turbulent flow structure and heat transfer in ribbed-straight, divergent and convergent ducts
Etminan, Amin, Harun, Zambri and Sharifian, Ahmad. 2016. "Numerical simulation of three dimensional turbulent flow structure and heat transfer in ribbed-straight, divergent and convergent ducts." International Journal of Mechanics. 10, pp. 362-367.
Geometrical optimization of a swirling Savonius wind turbine using an open jet wind tunnel
Al-Faruk, Abdullah and Sharifian, Ahmad. 2016. "Geometrical optimization of a swirling Savonius wind turbine using an open jet wind tunnel." Alexandria Engineering Journal. 55 (3), pp. 2055-2064. https://doi.org/10.1016/j.aej.2016.07.005
A novel ember shower simulator for assessing performance of low porosity screens at high wind speeds against firebrand attacks
Sharifian, Ahmad and Hashempour, Javad. 2016. "A novel ember shower simulator for assessing performance of low porosity screens at high wind speeds against firebrand attacks." Journal of Fire Sciences. 34 (4), pp. 335-355. https://doi.org/10.1177/0734904116655175
Power and velocity control of wind turbines by adaptive fuzzy controller during full load operation
Habibi, H., Koma, A. Yousefi and Sharifian, A.. 2016. "Power and velocity control of wind turbines by adaptive fuzzy controller during full load operation." Iranian Journal of Fuzzy Systems. 13 (3), pp. 35-48.
Effects of flow parameters on the performance of vertical axis swirling type Savonius wind turbine
Al-Faruk, A. and Sharifian, A. S.. 2015. "Effects of flow parameters on the performance of vertical axis swirling type Savonius wind turbine." International Journal of Automotive and Mechanical Engineering. 12 (July-December), pp. 2929-2943. https://doi.org/10.15282/ijame.12.2015.10.0245
Impacts of room temperature on the performance of a portable propane air conditioner
Sharifian, Ahmad and Tangalajuk Siang, Jeri. 2015. "Impacts of room temperature on the performance of a portable propane air conditioner." International Journal of Air-Conditioning and Refrigeration. 23 (2), pp. 1550015-1. https://doi.org/10.1142/S2010132515500157
Bushfire traps: the application of mesh screens to contain bushfires
Hashempour, Javad, Sharifian, Ahmad and Billingsley, John. 2015. "Bushfire traps: the application of mesh screens to contain bushfires." 2015 Fire Protection Australia Conference (FPA2015). Gold coast, Australia 25 - 26 Mar 2015
An introduction to a homogeneous charge compression ignition engine
Hairuddin, A. A., Wandel, A. P. and Yusaf, T.. 2014. "An introduction to a homogeneous charge compression ignition engine." Journal of Mechanical Engineering and Sciences. 7, pp. 1042-1052. https://doi.org/10.15282/jmes.7.2014.3.0101
How do university engineering graduates influence high school students through mentoring programs
Gow, Ingrid and Wandel, Andrew P.. 2014. "How do university engineering graduates influence high school students through mentoring programs." Bainbridge-Smith, Andrew, Qi, Ziming Tom and Gupta, Gourab Sen (ed.) 25th Annual Conference of the Australasian Association for Engineering Education (AAEE 2014). Wellington, New Zealand 07 - 10 Dec 2014 Palmerston North, New Zealand.
Effecting teamwork outcomes in online courses
Wandel, Andrew P. and Jolly, Hannah. 2014. "Effecting teamwork outcomes in online courses." Bainbridge-Smith, Andrew, Qi, Ziming Tom and Gupta, Gourab Sen (ed.) 25th Annual Conference of the Australasian Association for Engineering Education (AAEE 2014). Wellington, New Zealand 07 - 10 Dec 2014 Palmerston North, New Zealand.
Influence of blade overlap and blade angle on the aerodynamic coefficients in vertical axis swirling type Savonius wind turbine
Al-Faruk, A. and Sharifian, A.. 2014. "Influence of blade overlap and blade angle on the aerodynamic coefficients in vertical axis swirling type Savonius wind turbine." Chowdhury, Harun and Alam, Firoz (ed.) 19th Australasian Fluid Mechanics Conference (AFMC 2014). Melbourne, Australia 08 - 11 Dec 2014 Melbourne, Australia.
A review of hydrogen and natural gas addition in diesel HCCI engines
Hairuddin, A. Aziz, Yusaf, Talal and Wandel, Andrew P.. 2014. "A review of hydrogen and natural gas addition in diesel HCCI engines." Renewable and Sustainable Energy Reviews. 32, pp. 739-761. https://doi.org/10.1016/j.rser.2014.01.018
Students' mathematical preparation: differences in staff and student perceptions
Wandel, Andrew P., Robinson, Clare, Abdulla, Shahab, Dalby, Tim, Frederiks, Anita and Galligan, Linda. 2015. "Students' mathematical preparation: differences in staff and student perceptions." International Journal of Innovation in Science and Mathematics Education. 23 (1), pp. 82-93.
Inducing Swirl Flow within Stationary Cylindrical Split Channel
Al-Atresh, Safia R.. 2015. Inducing Swirl Flow within Stationary Cylindrical Split Channel. PhD Thesis Doctor of Philosophy. University of Southern Queensland.
Air fuel ratio study for mixture of biogas and hydrogen on mild combustion
Noor, M. M., Wandel, Andrew P. and Yusaf, Talal. 2014. "Air fuel ratio study for mixture of biogas and hydrogen on mild combustion." International Journal of Automotive and Mechanical Engineering. 10 (1), pp. 2144-2154. https://doi.org/10.15282/ijame.9.2013.29.0180
Effect of air-fuel ratio on temperature distribution and pollutants for biogas MILD combustion
Noor, M. M., Wandel, Andrew P. and Yusaf, Talal. 2014. "Effect of air-fuel ratio on temperature distribution and pollutants for biogas MILD combustion." International Journal of Automotive and Mechanical Engineering. 10 (1), pp. 1980-1992. https://doi.org/10.15282/ijame.10.2014.15.0166
The simulation of biogas combustion in a MILD burner
Noor, M. M., Wandel, Andrew P. and Yusaf, Talal. 2014. "The simulation of biogas combustion in a MILD burner." Journal of Mechanical Engineering and Sciences. 6 (1), pp. 995-1013.
Influence of scalar dissipation on flame success in turbulent sprays with spark ignition
Wandel, Andrew P.. 2014. "Influence of scalar dissipation on flame success in turbulent sprays with spark ignition." Combustion and Flame. 161 (10), pp. 2579-2600. https://doi.org/10.1016/j.combustflame.2014.04.006
MILD combustion: the future for lean and clean combustion technology
Noor, M. M., Wandel, Andrew P. and Yusaf, Talal. 2014. "MILD combustion: the future for lean and clean combustion technology." International Review of Mechanical Engineering. 8 (1), pp. 251-257.
Design and development of mild combustion burner
Noor, M. M., Wandel, Andrew P. and Yusaf, Talal. 2013. "Design and development of mild combustion burner." Journal of Mechanical Engineering and Sciences. 5, pp. 662-676. https://doi.org/10.15282/jmes.5.2013.13.0064
Effect of different heat transfer models on a diesel homogeneous charge compression ignition engine
Hairuddin, Abdul Aziz, Yusaf, Talal and Wandel, Andrew. 2013. "Effect of different heat transfer models on a diesel homogeneous charge compression ignition engine." International Journal of Automotive and Mechanical Engineering. 8 (1), pp. 1292-1304.
Implementation of CMC in a 0-D single-zone model of a diesel HCCI engine
Hairuddin, A. Aziz, Yusaf, Talal and Wandel, Andrew P.. 2013. "Implementation of CMC in a 0-D single-zone model of a diesel HCCI engine." Zhu, Mingming, Yu, Yun, Vuthaluru, Hari, Zhang, Zhezi and Zhang, Dongke (ed.) 7th Australian Combustion Symposium (ACS 2013). Perth, Australia 06 - 08 Nov 2013 Sydney, Australia.
Analysis of recirculation zone and ignition position of non-premixed bluff-body for biogas mild combustion
Noor, M. M., Wandel, Andrew P. and Yusaf, Talal. 2013. "Analysis of recirculation zone and ignition position of non-premixed bluff-body for biogas mild combustion." International Journal of Automotive and Mechanical Engineering. 8 (1), pp. 1176-1186.
The analysis of recirculation zone and ignition position of non-premixed bluff-body for biogas mild combustion
Noor, M. M., Wandel, Andrew P. and Yusaf, Talal. 2013. "The analysis of recirculation zone and ignition position of non-premixed bluff-body for biogas mild combustion." Ishak, Mahadzir and Rahman, Md. Mustafizur (ed.) 2nd International Conference of Mechanical Engineering Research (ICMER 2013). Pahang, Malaysia 01 - 03 Jul 2013 Pahang, Malaysia.
Caring and sharing computer files with configuration management
Wandel, Andrew P., Jokic, Michael D. and Kist, Alexander A.. 2013. "Caring and sharing computer files with configuration management." Lemckert, Charles, Jenkins, Graham and Lang-Lemckert, Susan (ed.) 24th Annual Conference of the Australasian Association for Engineering Education (AAEE 2013). Gold Coast, Australia 08 - 11 Dec 2013 Brisbane, Australia.
Students' mathematical preparation Part A: lecturers' perceptions
Galligan, Linda, Wandel, Andrew, Pigozzo, Robyn, Frederiks, Anita, Robinson, Clare, Abdulla, Shahab and Dalby, Tim. 2013. "Students' mathematical preparation Part A: lecturers' perceptions." Deborah, King, Birgit, Loch and Leanne, Rylands (ed.) 9th Delta Conference of Teaching and Learning of Undergraduate Mathematics and Statistics 2013: Shining Through the Fog. Kiama, Australia 24 - 29 Nov 2013 Sydney, Australia.
Students' mathematical preparation Part B: students' perceptions
Dalby, Tim, Robinson, Clare, Abdulla, Shahab, Galligan, Linda, Frederiks, Anita, Pigozzo, Robyn and Wandel, Andrew. 2013. "Students' mathematical preparation Part B: students' perceptions." King, Deborah, Loch, Birgit and Rylands, Leanne (ed.) 9th Delta Conference of Teaching and Learning of Undergraduate Mathematics and Statistics 2013: Shining Through the Fog. Kiama, Australia 24 - 29 Nov 2013 Sydney, Australia.
Direct numerical simulations of passive scalars: effect of initial mixture fraction distribution on timescales
du Preez, M. and Wandel, Andrew P.. 2013. "Direct numerical simulations of passive scalars: effect of initial mixture fraction distribution on timescales." Zhang, Dongke (ed.) 7th Australian Combustion Symposium (ACS 2013). Perth, Australia 06 - 08 Nov 2013 Perth, Australia.
Numerical study of oxygen dilution and temperature distribution of biogas combustion in Bluff-body MILD burner
Noor, M. M., Wandel, Andrew P. and Yusaf, Talal. 2013. "Numerical study of oxygen dilution and temperature distribution of biogas combustion in Bluff-body MILD burner." Masri, Assaad (ed.) 7th Australian Combustion Symposium (ACS 2013). Perth, Australia 06 - 08 Nov 2013 Perth, Australia.
Mixture fraction probability density functions in sparse spray flames with spark ignition
Wandel, Andrew P.. 2013. "Mixture fraction probability density functions in sparse spray flames with spark ignition." Zhu, Mingming, Ma, Yu, Yu, Yun, Vuthaluru, Hari, Zhang, Zhezi and Zhang, Dongke (ed.) 7th Australian Combustion Symposium (ACS 2013). Perth, Australia 06 - 08 Nov 2013 Perth, Australia.
Reducing the mass of the refrigerant in the capillary tube of a propane air-conditioner
Tangalajuk Siang, Jeri and Sharifian, Ahmad. 2013. "Reducing the mass of the refrigerant in the capillary tube of a propane air-conditioner." Ngoc Hai, Duong (ed.) 14th Asian Congress of Fluid Mechanics (14 ACFM). Hanoi, Vietnam 15 - 19 Oct 2013 Hanoi, Vietnam.
Optimizing the coupling of a firebrand generator to a horizontal wind tunnel
Hashempour, Javad and Sharifian, Ahmad. 2013. "Optimizing the coupling of a firebrand generator to a horizontal wind tunnel." Advanced Materials Research. 726-731, pp. 971-976. https://doi.org/10.4028/www.scientific.net/AMR.726-731.971
The air fuel ratio study for the mixture of biogas and hydrogen on mild combustion
Noor, M. M., Wandel, Andrew P. and Yusaf, Talal. 2013. "The air fuel ratio study for the mixture of biogas and hydrogen on mild combustion." 3rd Malaysian Postgraduate Conference (MPC 2013). Sydney, Australia 04 - 05 Jul 2013 Sydney, Australia.
Discretization of three dimensional non-uniform grid: conditional moment closure elliptic equation using finite difference method
Noor, M. M., Wandel, Andrew P. and Yusaf, Talal. 2013. "Discretization of three dimensional non-uniform grid: conditional moment closure elliptic equation using finite difference method." 3rd Malaysian Postgraduate Conference (MPC 2013). Sydney, Australia 04 - 05 Jul 2013 Sydney, Australia.
A homogeneous charge compression ignition engine: an introduction
Hairuddin, A. Aziz, Wandel, Andrew P. and Yusaf, Talal. 2013. "A homogeneous charge compression ignition engine: an introduction." 3rd Malaysian Postgraduate Conference (MPC 2013). Sydney, Australia 04 - 05 Jul 2013 Sydney, Australia.
Conditional dissipation of scalars in homogeneous turbulence: closure for MMC modelling
Wandel, Andrew P.. 2013. "Conditional dissipation of scalars in homogeneous turbulence: closure for MMC modelling." Combustion Theory and Modelling. 17 (4), pp. 707-748. https://doi.org/10.1080/13647830.2013.794391
The effect of direction of low speed winds on the performance of a split chimney
Sharifian, Ahmad. 2012. "The effect of direction of low speed winds on the performance of a split chimney ." Bai, Yilong, Wang, Jinaxiang and Fang, Daining (ed.) 23rd International Congress of Theoretical and Applied Mechanics (ICTAM 2012). Beijing, China Beijing, China.
Optically addressed pressure sensors for transient gas dynamics: calibration of a preliminary design
Sharifian, S. A. and Buttsworth, D. R.. 2001. "Optically addressed pressure sensors for transient gas dynamics: calibration of a preliminary design." Dally, B. B. (ed.) 14th Australasian Fluid Mechanics Conference (AFMC 2001) . Adelaide, South Australia 09 - 14 Dec 2001 Adelaide, South Australia.
Reducing the mechanical hysteresis problem in optically-addressed diaphragm pressure sensors
Sharifian, S. A. and Buttsworth, D. R.. 2002. "Reducing the mechanical hysteresis problem in optically-addressed diaphragm pressure sensors." Tomasini, Enrico (ed.) SPIE 2002: Vibration Measurements by Laser Techniques: Advances and Applications. Ancona, Italy 18 - 21 Jun 2002 Washington, USA. https://doi.org/10.1117/12.468141
Extinction predictors in turbulent sprays
Wandel, Andrew P.. 2013. "Extinction predictors in turbulent sprays." Proceedings of the Combustion Institute. 34 (1), pp. 1625-1632. https://doi.org/10.1016/j.proci.2012.07.037
Hybrid multiple mapping conditioning modeling of local extinction
Wandel, Andrew P. and Lindstedt, R. Peter. 2013. "Hybrid multiple mapping conditioning modeling of local extinction." Proceedings of the Combustion Institute. 34 (1), pp. 1365-1372. https://doi.org/10.1016/j.proci.2012.07.073
Student perceptions of teammates' performance: influence of team formation method
Wandel, Andrew P. and Willey, Keith. 2012. "Student perceptions of teammates' performance: influence of team formation method." Mann, Llewellyn and Daniel, Scott (ed.) 23rd Annual Conference of the Australasian Association for Engineering Education (AAEE 2012). Melbourne, Australia 03 - 05 Dec 2012 Melbourne, Australia.
A review of mild combustion and open furnace design consideration
Noor, M. M., Wandel, Andrew P. and Yusaf, Talal. 2012. "A review of mild combustion and open furnace design consideration." International Journal of Automotive and Mechanical Engineering. 6 (1), pp. 730-754.
Numerical investigation of performance of a new type of savonius turbine
Al-Faruk, A., Sharifian, S. A. and Al-Atresh, S.. 2012. "Numerical investigation of performance of a new type of savonius turbine." Brandner, P. A and Pearce, B. W. (ed.) 18th Australasian Fluid Mechanics Conference (AFMC 2012). Launceston, Australia 03 - 07 Dec 2012 Melbourne, Australia.
Dilution of toxic gases and smoke emissions from residential chimneys using a low-cost cap
Sharifian, Ahmad and Hashempour, Javad. 2012. "Dilution of toxic gases and smoke emissions from residential chimneys using a low-cost cap." Brandner, P. A. and Pearce, B. W. (ed.) 18th Australasian Fluid Mechanics Conference (AFMC 2012). Launceston, Australia 03 - 07 Dec 2012 Melbourne, Australia.
Numerical computation of pressure drop across an off supplementary firing burner in heat recovery steam generator
Karimkashi, Shervin, Kermani, Mohammad J., Sharifian, Ahmad and Hashempour, Javad. 2012. "Numerical computation of pressure drop across an off supplementary firing burner in heat recovery steam generator." Brandner, P. A. and Pearce, B. W. (ed.) 18th Australasian Fluid Mechanics Conference (AFMC 2012). Launceston, Australia 03 - 07 Dec 2012 Melbourne, Australia.
Using a split chimney for dilution of exhaust pollution: a CFD approach
Al-Atresh, Safia, Sharifian, Ahmad and Kueger, Bradley. 2012. "Using a split chimney for dilution of exhaust pollution: a CFD approach." Ni, Zeng (ed.) 2012 International Conference on Fluid Dynamics and Thermodynamics Technologies (FDTT 2012). Singapore 17 - 18 Mar 2012 Singapore.
The effect of wind speed on the performance of a split chimney
Sharifian, Ahmad. 2012. "The effect of wind speed on the performance of a split chimney." Ni, Zeng (ed.) 2012 International Conference on Fluid Dynamics and Thermodynamics Technologies (FDTT 2012). Singapore 17 - 18 Mar 2012 Singapore.
The effect of inlet velocity and temperature on the strength of the swirling induced by a split channel: a CFD approach
Al-Atresh, R. S., Sharifian, S. A. and Al-Faruk, A.. 2012. "The effect of inlet velocity and temperature on the strength of the swirling induced by a split channel: a CFD approach." Brandner, P. A. and Pearce, B. W. (ed.) 18th Australasian Fluid Mechanics Conference (AFMC 2012). Launceston, Australia 03 - 07 Dec 2012 Melbourne, Australia.
HCCI engine: numerical and experimental approach
Hairuddin, A. Aziz, Yusaf, Talal F. and Wandel, Andrew P.. 2012. "HCCI engine: numerical and experimental approach." Noor, M. M., Baker, Paul and Yusaf, Talal F. (ed.) USQ Combustion Meeting 2012 (26th September). Toowoomba, Australia 26 Sep 2012 Toowoomba, Australia.
Investigation of Biogas Moderate or Intense Low Oxygen Dilution (MILD) combustion on open furnace bluff-body burner
Noor, M. M., Wandel, Andrew P. and Yusaf, T. F.. 2012. "Investigation of Biogas Moderate or Intense Low Oxygen Dilution (MILD) combustion on open furnace bluff-body burner." Noor, M. M., Baker, Paul and Yusaf, Talal F. (ed.) USQ Combustion Meeting 2012 (29th August). Toowoomba, Australia 29 Aug 2012 Toowoomba, Australia.
Modelling of non-premixed turbulent combustion of hydrogen using conditional moment closure method
Noor, M. M., Hairuddin, A. Aziz, Wandel, Andrew P. and Yusaf, T. F.. 2012. "Modelling of non-premixed turbulent combustion of hydrogen using conditional moment closure method." IOP Conference Series: Materials Science and Engineering. 36 (1), pp. 1-17. https://doi.org/10.1088/1757-899X/36/1/012036
The modelling of the effect of air fuel ratio on unburned hydrocarbons for MILD combustion
Noor, M. M., Wandel, Andrew P. and Yusaf, T. F.. 2012. "The modelling of the effect of air fuel ratio on unburned hydrocarbons for MILD combustion." Noor, M. M., Rahman, M. M. and Ismail, J. (ed.) 2nd Malaysian Postgraduate Conference (MPC 2012). Gold Coast, Australia 07 - 09 Jul 2012 Sydney, Australia.
A preliminary study of control parameters for open furnace mild combustion using CFD
Noor, M. M., Wandel, Andrew P. and Yusaf, T. F.. 2012. "A preliminary study of control parameters for open furnace mild combustion using CFD." Noor, M. M., Rahman, M. M. and Ismail, J. (ed.) 2nd Malaysian Postgraduate Conference (MPC 2012). Gold Coast, Australia 07 - 09 Jul 2012 Sydney, Australia.
Mild combustion: a technical review towards open furnace combustion
Noor, M. M., Wandel, Andrew P. and Yusaf, T. F.. 2012. "Mild combustion: a technical review towards open furnace combustion." Noor, M. M., Rahman, M. M. and Ismail, J. (ed.) 2nd Malaysian Postgraduate Conference (MPC 2012). Gold Coast, Australia 07 - 09 Jul 2012 Sydney, Australia.
Numerical investigation of influence of air and fuel dilution for open furnace MILD combustion burner
Noor, M. M., Wandel, Andrew P. and Yusaf, T. F.. 2012. "Numerical investigation of influence of air and fuel dilution for open furnace MILD combustion burner." 2012 Southern Regional Engineering Conference (SREC 2012). Toowoomba, Australia 01 Sep 2012 Canberra, Australia.
Predicting the combustion behaviour of a diesel HCCI engine using a zero-dimensional single-zone model
Hairuddin, A. Aziz, Yusaf, Talal F. and Wandel, Andrew P.. 2011. "Predicting the combustion behaviour of a diesel HCCI engine using a zero-dimensional single-zone model." Kennedy, Eric, Dlugogorski, Bogdan, Moghtaderi, Behdad and Masri, Assaad (ed.) 11th Australian Combustion Symposium (ACS 2011). Newcastle, Australia 29 Nov - 01 Dec 2011 Sydney, Australia.
Team formation by region to improve outcomes for distance-education students in a PBL course
Wandel, Andrew P.. 2011. "Team formation by region to improve outcomes for distance-education students in a PBL course." 41st ASEE/IEEE Frontiers in Education Conference (FIE 2011): Celebrating 41 Years of Monumental Innovations from around the World. Rapid City, United States 12 - 15 Oct 2011 Piscataway, NJ. United States. https://doi.org/10.1109/FIE.2011.6142727
Implementation of conditional moment closure using the Taylor expansion and finite differences
Noor, M. M., Hairuddin, A. Aziz, Wandel, Andrew P. and Yusaf, T. F.. 2011. "Implementation of conditional moment closure using the Taylor expansion and finite differences." 1st International Conference of Mechanical Engineering Research (ICMER 2011). Kuantan, Malaysia 05 - 07 Dec 2011 Kuantan, Malaysia.
Optimising the design, installation and operation of a monolayer application system on a farm dam via a 'Universal Design Framework'
Brink, Gavin, Wandel, Andrew, Pittaway, Pam, Hancock, Nigel and Schmidt, Erik. 2011. "Optimising the design, installation and operation of a monolayer application system on a farm dam via a 'Universal Design Framework'." Thompson, Chris (ed.) Irrigation 2011: New Horizons, Fresh Ideas Regional Conference and Exhibition. Launceston, Australia 22 - 25 Aug 2011 Sydney, Australia.
A stochastic micromixing model based on the turbulent diffusion length scale
Wandel, Andrew P.. 2011. "A stochastic micromixing model based on the turbulent diffusion length scale." Kennedy, Eric, Moghtaderi, Bogdan, Dlugogorski, Behdad and Masri, Assaad (ed.) 11th Australian Combustion Symposium (ACS 2011). Newcastle, Australia 29 Nov - 01 Dec 2011 Sydney, Australia.
A hybrid EMST-modified Curl's model for turbulent combustion modelling
Noor, M. M., Wandel, Andrew P. and Yusaf, T. F.. 2011. "A hybrid EMST-modified Curl's model for turbulent combustion modelling." University of Southern Queensland's Research Evening: Showcasing USQ Research (2011). Toowoomba, Australia 17 Nov 2011
Study of random particle interactions for analysis of diffusion lengths in turbulent combustion modelling
Noor, M. M., Yusaf, T. F. and Wandel, Andrew P.. 2011. "Study of random particle interactions for analysis of diffusion lengths in turbulent combustion modelling." Kennedy, Eric, Dlugogorski, Bogdan, Moghtaderi, Behdad and Masri, Assaad (ed.) 11th Australian Combustion Symposium (ACS 2011). Newcastle, Australia 29 Nov - 01 Dec 2011 Sydney, Australia.
Utilising tablet PCs in tutorials to aid external students
Wandel, Andrew P.. 2009. "Utilising tablet PCs in tutorials to aid external students." Kestell, Colin, Grainger, Steven and Cheung, John (ed.) 20th Annual Conference for the Australasian Association of Engineering Education (AAEE 2009). Adelaide, Australia 06 - 09 Dec 2009 Adelaide, Australia.
Deflection of a pretensioned circular diaphragm due to aerothermal loading
Sharifian, S. Ahmad and Buttsworth, David R.. 2000. "Deflection of a pretensioned circular diaphragm due to aerothermal loading." May, R. L., Grundy, I. H. and Fitz-Gerald, G. F. (ed.) 4th Biennial Engineering Mathematics and Applications Conference : Mathematics and Engineering: An Innovative Partnership (EMAC 2000). Melbourne, Australia 10 - 13 Sep 2000 Melbourne, Australia.
Which version art thou? Configuration management in engineering education
Jokic, Michael D., Wandel, Andrew P. and Kist, Alexander A.. 2010. "Which version art thou? Configuration management in engineering education." Gardner, Anne and Jolly, Lesley (ed.) 21st Annual Conference for the Australasian Association of Engineering Education (AAEE 2010). Sydney, Australia 05 - 08 Dec 2010 Sydney, Australia.
Analysis of data to develop models for spray combustion
Clarke, Jason, Wandel, Andrew P. and Mastorakos, E.. 2010. "Analysis of data to develop models for spray combustion." Goh, Steven C. and Wang, Hao (ed.) 2010 Southern Region Engineering Conference (SREC 2010). Toowoomba, Australia 11 - 12 Nov 2010 Toowoomba, Australia.
Hydrogen and natural gas comparison in diesel HCCI engines -a review
Hairuddin, A. Aziz, Wandel, Andrew P. and Yusaf, Talal. 2010. "Hydrogen and natural gas comparison in diesel HCCI engines -a review." Goh, Steven C. and Wang, Hao (ed.) 2010 Southern Region Engineering Conference (SREC 2010). Toowoomba, Australia 11 - 12 Nov 2010 Toowoomba, Australia.
Linkages between courses: a holistic approach to programmes
Wandel, Andrew P.. 2010. "Linkages between courses: a holistic approach to programmes." Gardner, Anne and Jolly, Lesley (ed.) 21st Annual Conference for the Australasian Association of Engineering Education (AAEE 2010). Sydney, Australia 05 - 08 Dec 2010 Sydney, Australia.
Student usage of videos containing worked solutions
Wandel, Andrew P.. 2010. "Student usage of videos containing worked solutions." Gardner, Anne and Jolly, Lesley (ed.) 21st Annual Conference for the Australasian Association of Engineering Education (AAEE 2010). Sydney, Australia 05 - 08 Dec 2010 Sydney, Australia.
Scaffolding distance learning in mathematics for engineering: identifying key troublesome knowledge
Galligan, Linda, Wandel, Andrew P. and Hartle, R. Todd. 2010. "Scaffolding distance learning in mathematics for engineering: identifying key troublesome knowledge." Hudson, Peter, Chandra, Vinesh, King, Donna and Lee, Kar-Tin (ed.) 1st Science, Technology, Engineering and Mathematics in Education Conference (STEM 2010). Brisbane, Australia 26 - 27 Nov 2010 Brisbane, Australia.
Experimental and modeling investigation of the performance characteristics on diesel HCCI with hydrogen additive - a review
Supeni, E. E., Yusaf, Talal, Wandel, Andrew P., Buttsworth, David R. and Noor, M. M.. 2010. "Experimental and modeling investigation of the performance characteristics on diesel HCCI with hydrogen additive - a review." 2nd National Conference in Mechanical Engineering Research and Postgraduate Studies. Kuantan, Malaysia 03 - 04 Dec 2010 Malaysia.
An experimental study of wind force acting on commercial double-layered square metal screens at different spacing
Sharifian, Ahmad. 2010. "An experimental study of wind force acting on commercial double-layered square metal screens at different spacing." Mallinson, G. D. and Cater, J. E. (ed.) 17th Australasian Fluid Mechanics Conference (AFMC 2010). Auckland, New Zealand 05 - 09 Dec 2010 Auckland, New Zealand.
Double-layered metal mesh screens to contain or exclude thermal radiation from bush fires
Sharifian, Ahmad and Buttsworth, David. 2010. "Double-layered metal mesh screens to contain or exclude thermal radiation from bush fires." Journal of Fire Protection Engineering. 20 (4), pp. 291-311. https://doi.org/10.1177/1042391510367366
Determining operational requirements to optimise monolayer performance on a farm dam via a 'Universal Design Framework'
Brink, Gavin, Wandel, Andrew P., Pittaway, Pam, Hancock, Nigel and Pather, Selvan. 2010. "Determining operational requirements to optimise monolayer performance on a farm dam via a 'Universal Design Framework'." Montagu, Kelvin (ed.) Australian Irrigation Conference and Exibition 2010: One Water Many Futures. Sydney, Australia 08 - 10 Jun 2010 Sydney, Australia.
A ‘universal design framework’ for installation planning and operational management of evaporation-suppressing films on agricultural reservoirs
Brink, Gavin, Wandel, Andrew P., Pittaway, Pam, Hancock, Nigel and Pather, Selvan. 2010. "A ‘universal design framework’ for installation planning and operational management of evaporation-suppressing films on agricultural reservoirs." Genet, Roger (ed.) International Conference on Agricultural Engineering: Towards Environmental Technologies (2010). Clermont-Ferrand, France 06 - 08 Sep 2010
Application of hybrid binomial Langevin-multiple mapping conditioning method to reacting jet flow
Wandel, Andrew P. and Lindstedt, R. Peter. 2009. "Application of hybrid binomial Langevin-multiple mapping conditioning method to reacting jet flow." Klimenko, Alexander Y., Cleary, Matthew J., Feng, Bo, Rudolph, Victor, Boyce, Russell R., Wandel, Andrew P. and Clements, Rose (ed.) Australian Combustion Symposium (ACS 2009). Brisbane, Australia 02 - 04 Dec 2009 Brisbane, Australia.
Direct numerical simulations of autoignition in turbulent two-phase flows
Schroll, Peter, Wandel, Andrew P., Cant, R. Stewart and Mastorakos, E.. 2009. "Direct numerical simulations of autoignition in turbulent two-phase flows." Proceedings of the Combustion Institute. 32 (2), pp. 2275-2282. https://doi.org/10.1016/j.proci.2008.06.057
Direct numerical simulations of turbulent flame expansion in fine sprays
Wandel, Andrew P., Chakraborty, Nilanjan and Mastorakos, E.. 2009. "Direct numerical simulations of turbulent flame expansion in fine sprays." Proceedings of the Combustion Institute. 32 (2), pp. 2283-2290. https://doi.org/10.1016/j.proci.2008.06.102
Towards adaptive operational requirements for optimal application of evaporation-suppressing monolayer to reservoirs via a 'universal design framework'
Brink, Gavin, Wandel, Andrew P., Hancock, Nigel and Pather, Selvan. 2009. "Towards adaptive operational requirements for optimal application of evaporation-suppressing monolayer to reservoirs via a 'universal design framework'." IWER 2009: International Workshop on Evaporation from Reservoirs. Gold Coast, Australia 09 - 11 Dec 2009 Gold Coast, Australia.
Testing multiple mapping conditioning mixing for Monte Carlo probability density function simulations
Wandel, Andrew P. and Klimenko, Alexander Y.. 2005. "Testing multiple mapping conditioning mixing for Monte Carlo probability density function simulations." Physics of Fluids. 17 (12), pp. 128105-1. https://doi.org/10.1063/1.2147609
Hybrid binomial Langevin-multiple mapping conditioning modeling of a reacting mixing layer
Wandel, Andrew P. and Lindstedt, R. Peter. 2009. "Hybrid binomial Langevin-multiple mapping conditioning modeling of a reacting mixing layer." Physics of Fluids. 21 (1), pp. 015103-015116. https://doi.org/10.1063/1.3041716
Direct radiation from wildfires through square woven screens
Sharifian, Ahmad and Buttsworth, David R.. 2009. "Direct radiation from wildfires through square woven screens." ASME 2008 Summer Heat Transfer Conference (HT 2008). Jacksonville, United States 10 - 14 Aug 2008 Jacksonville, FL. United States. https://doi.org/10.1115/HT2008-56270
Thermal effects on fibre optic pressure sensor during free piston compression experiments
Sharifian, S. A. and Buttsworth, D. R.. 2005. "Thermal effects on fibre optic pressure sensor during free piston compression experiments." 8th International Symposium on Fluid Control, Measurement and Visualization (8th FLUCOME). Chengdu, China 22 - 25 Aug 2005
Evaluation of glued-diaphragm fibre optic pressure sensors in a shock tube
Sharifian, S. Ahmad and Buttsworth, David R.. 2007. "Evaluation of glued-diaphragm fibre optic pressure sensors in a shock tube." Shock Waves: an international journal on shock waves, detonations and explosions. 16 (3), pp. 189-197. https://doi.org/10.1007/s00193-006-0062-x
Modelling the static thermal sensitivity of diaphragm-based fibre optic pressure sensors
Sharifian, Ahmad, Watson, Stuart, Buttsworth, David R. and Barton, James. 2007. "Modelling the static thermal sensitivity of diaphragm-based fibre optic pressure sensors." Chandratilleke, Tilak T. and Narayanaswamy, Ramesh (ed.) 8th Australasian Heat and Mass Transfer Conference. Perth, Australia 26 - 29 Jul 2005 Redding, CT, USA.
Minimum safe standoff distance for protection from bushfire radiation by commercial metal meshes
Sharifian, Ahmad and Buttsworth, David R.. 2007. "Minimum safe standoff distance for protection from bushfire radiation by commercial metal meshes." Chandratilleke, Tilak T. and Narayanaswamy, Ramesh (ed.) 8th Australasian Heat and Mass Transfer Conference. Perth, Australia 26 - 29 Jul 2005 Redding, CT, USA.
Computational simulation of the wind-force on metal meshes
Sharifian, Ahmad and Buttsworth, David R.. 2007. "Computational simulation of the wind-force on metal meshes." Jacobs, Peter A., McIntyre, Tim, Cleary, Matthew J., Buttsworth, David R., Mee, David, Clements, Rose, Morgan, Richard and Lemckert, Charles (ed.) 16th Australasian Fluid Mechanics Conference (AFMC 2007). Gold Coast, Australia 03 - 07 Dec 2007 Brisbane, Australia.
Fibre optic pressure transducers for disturbance measurements in transient aerodynamic research facilities
Sharifian, S. Ahmad. 2003. Fibre optic pressure transducers for disturbance measurements in transient aerodynamic research facilities . PhD Thesis Doctor of Philosophy. University of Southern Queensland.