40. Engineering

Title	40. Engineering
Parent	ANZSRC Field of Research

Latest research outputs

Sort by Date Title

Wind turbine blade design

Schubel, P. J. and Crossley, R. J.. 2012. "Wind turbine blade design." Energies. 5 (9), pp. 3425-3449. https://doi.org/10.3390/en5093425

Article

Review of structural health and cure monitoring techniques for large wind turbine blades

Schubel, P. J., Crossley, R. J., Boateng, E. K. G. and Hutchinson, J. R.. 2013. "Review of structural health and cure monitoring techniques for large wind turbine blades." Renewable Energy. 51, pp. 113-123. https://doi.org/10.1016/j.renene.2012.08.072

Article

Can flax replace E-glass in structural composites? A small wind turbine blade case study

Shah, Darshil U., Schubel, Peter J. and Clifford, Mike J.. 2013. "Can flax replace E-glass in structural composites? A small wind turbine blade case study." Composites Part B: Engineering. 52, pp. 172-181. https://doi.org/10.1016/j.compositesb.2013.04.027

Article

Mechanical property characterization of aligned plant yarn reinforced thermoset matrix composites manufactured via vacuum infusion

Shah, Darshil U., Schubel, Peter J., Clifford, Mike J. and Licence, Peter. 2014. "Mechanical property characterization of aligned plant yarn reinforced thermoset matrix composites manufactured via vacuum infusion." Polymer-Plastics Technology and Engineering. 53 (3), pp. 239-253. https://doi.org/10.1080/03602559.2013.843710

Article

A novel rate control algorithm for video coding based on fuzzy-PID controller

Hou, Yonghong, Wang, Pichao, Xiang, Wei, Gao, Zhimin and Hou, Chunping. 2015. "A novel rate control algorithm for video coding based on fuzzy-PID controller." Signal, Image and Video Processing. 9 (4), pp. 875-884. https://doi.org/10.1007/s11760-013-0518-2

Article

Experimental determination and control of prepreg tack for automated manufacture

Crossley, R. J., Schubel, P. J. and Warrior, N. A.. 2011. "Experimental determination and control of prepreg tack for automated manufacture." Plastics Rubber and Composites. 40 (6-7), pp. 363-368. https://doi.org/10.1179/174328910X12777566997810

Article

The tensile behaviour of off-axis plant fibre composites: an insight on the non-linear stress-strain response

Shah, Darshil U., Schubel, Peter J., Clifford, Mike J. and Licence, Peter. 2012. "The tensile behaviour of off-axis plant fibre composites: an insight on the non-linear stress-strain response." Polymer Composites. 33 (9), pp. 1494-1504. https://doi.org/10.1002/pc.22279

Article

Time-temperature equivalence in the tack and dynamic stiffness of polymer prepreg and its application to automated composites manufacturing

Crossley, R. J., Schubel, P. J. and De Focatiis, D. S. A.. 2013. "Time-temperature equivalence in the tack and dynamic stiffness of polymer prepreg and its application to automated composites manufacturing." Composites Part A: Applied Science and Manufacturing. 52, pp. 126-133. https://doi.org/10.1016/j.compositesa.2013.05.002

Article

A coupled structural and flow approach for numerical simulation of the light resin transfer moulding process. II: Fabric permeability and compaction characterisation, model results and a 6-kW wind turbine case study

Hutchinson, J. R. and Schubel, P. J.. 2014. "A coupled structural and flow approach for numerical simulation of the light resin transfer moulding process. II: Fabric permeability and compaction characterisation, model results and a 6-kW wind turbine case study." Journal of Reinforced Plastics and Composites. 33 (13), pp. 1237-1257. https://doi.org/10.1177/0731684414527806

Article

A coupled structural and flow approach for numerical simulation of the light resin transfer moulding process. I: Model outline

Hutchinson, J. R., Schubel, P. J. and Said, R.. 2014. "A coupled structural and flow approach for numerical simulation of the light resin transfer moulding process. I: Model outline." Journal of Reinforced Plastics and Composites. 33 (14), pp. 1332-1338. https://doi.org/10.1177/0731684414527805

Article

Furan matrix and flax fibre as a sustainable renewable composite: mechanical and fire-resistant properties in comparison to phenol, epoxy and polyester

Crossley, Richard, Schubel, Peter and Stevenson, Anthony. 2014. "Furan matrix and flax fibre as a sustainable renewable composite: mechanical and fire-resistant properties in comparison to phenol, epoxy and polyester." Journal of Reinforced Plastics and Composites. 33 (1), pp. 58-68. https://doi.org/10.1177/0731684413502108

Article

On recycled carbon fibre composites manufactured through a liquid composite moulding process

Shah, Darshil U. and Schubel, Peter J.. 2016. "On recycled carbon fibre composites manufactured through a liquid composite moulding process." Journal of Reinforced Plastics and Composites. 35 (7), pp. 533-540. https://doi.org/10.1177/0731684415623652

Article

Discovering network community based on multi-objective optimization

Huang, Faliang, Zhang, Shichao and Zhu, Xiaofeng. 2013. "Discovering network community based on multi-objective optimization." Journal of Software. 24 (9), pp. 2062-2077. https://doi.org/10.3724/SP.J.1001.2013.04400

Article

Application of Modis data to assess the latest forest cover changes of Sri Lanka

Perera, Kithsiri, Herath, Srikantha, Apan, Armando and Tateishi, Ryutaro. 2013. "Application of Modis data to assess the latest forest cover changes of Sri Lanka." Ogleby, Cliff (ed.) 22nd Annual Photogrammetry, Remote Sensing and Spatial Information Science Congress (ISPRS 2012): Imaging a Sustainable Future. Melbourne, Australia 25 Aug - 01 Sep 2012 Australia. Copernicus GmbH. https://doi.org/10.5194/isprsannals-I-7-165-2012

Paper

A follow up to study the behaviour of cable bolts in shear: experimental study and mathematical modelling

Aziz, Naj, Mirza, Ali, Nemcik, Jan, Rasekh, Haleh and Li, Xuwei. 2016. "A follow up to study the behaviour of cable bolts in shear: experimental study and mathematical modelling." Aziz, Naj and Kininmonth, Bob (ed.) 2016 Coal Operators' Conference. Wollongong, Australia 10 - 12 Feb 2016 Wollongong, Australia.

Paper

Load transfer characteristics of plain and spiral cable bolts tested in new non rotating pull testing apparatus

Aziz, Naj, Mirza, Ali, Nemcik, Jan, Li, Xuwei, Rasekh, Haleh and Wang, Gaofeng. 2016. "Load transfer characteristics of plain and spiral cable bolts tested in new non rotating pull testing apparatus." Aziz, Naj and Kininmonth, Bob (ed.) 2016 Coal Operators' Conference. Wollongong, Australia 10 - 12 Feb 2016 Wollongong, Australia.

Paper

Investigating natural organic carbon removal and structural alteration induced by pulsed ultrasound

Al-Juboori, Raed A., Yusaf, Talal, Aravinthan, Vasantha and Bowtell, Leslie. 2016. "Investigating natural organic carbon removal and structural alteration induced by pulsed ultrasound." Science of the Total Environment. 541, pp. 1019-1030. https://doi.org/10.1016/j.scitotenv.2015.09.143

Article

Insights into the scalability of magnetostrictive ultrasound technology for water treatment applications

Al-Juboori, Raed A., Bowtell, Leslie A., Yusaf, Talal and Aravinthan, Vasantha. 2016. "Insights into the scalability of magnetostrictive ultrasound technology for water treatment applications." Ultrasonics Sonochemistry. 28, pp. 357-366. https://doi.org/10.1016/j.ultsonch.2015.08.013

Article

Experimental measurement of direct thermal radiation through single-layer square-cell plain woven screens

Hashempour, Javad, Sharifian, Ahmad and Billingsley, John. 2016. "Experimental measurement of direct thermal radiation through single-layer square-cell plain woven screens." Journal of Heat Transfer: Transactions of the ASME. 138 (1), pp. 012701-1-012701-6. https://doi.org/10.1115/1.4031110

Article

Access to broadband internet and labour force outcomes: a case study of the Western Downs Region, Queensland

Alam, Khorshed and Mamun, Shamsul Arifeen Khan. 2017. "Access to broadband internet and labour force outcomes: a case study of the Western Downs Region, Queensland." Telematics and Informatics. 34 (4), pp. 73-84. https://doi.org/10.1016/j.tele.2016.12.011

Article

Effect of hygrothermal conditioning on the mechanical and thermal properties of epoxy grouts for offshore pipeline rehabilitation

Shamsuddoha, Md, Islam, Md Mainul, Aravinthan, Thiru, Manalo, Allan and Djukic, Luke P.. 2016. "Effect of hygrothermal conditioning on the mechanical and thermal properties of epoxy grouts for offshore pipeline rehabilitation." AIMS Material Science. 3 (3), pp. 832-850. https://doi.org/10.3934/matersci.2016.3.832

Article

Introduction of nano-structured solar cells

Das, Narottam. 2017. "Introduction of nano-structured solar cells." Das, Narottam (ed.) Nanostructured solar cells. Rijeka, Croatia. In-Tech. pp. 1-4

Edited book (chapter)

Nanostructured solar cells

Das, Narottam. Das, Narottam (ed.) 2017. Nanostructured solar cells. Rijeka, Croatia. In-Tech.

Edited book

Protection redundancy in a digital network within a high voltage utility substation based on IEC 62439-3

Kumar, Shantanu, Das, Narottam and Islam, Syed. 2016. "Protection redundancy in a digital network within a high voltage utility substation based on IEC 62439-3." Khallaghi , Maryam (ed.) 10th Australian Protection Symposium 2016. Melbourne, Australia 16 - 17 Aug 2016 Melbourne, Australia.

Paper

Modeling and analysis of GaAs solar cells for conversion efficiency improvement by reducing reflection losses

Chandrasekar, Devanandh and Das, Narottam. 2016. "Modeling and analysis of GaAs solar cells for conversion efficiency improvement by reducing reflection losses." Piprek, Joachim (ed.) 16th International Conference on Numerical Simulation of Optoelectronic Devices (NUSOD 2016). Sydney, Australia 11 - 15 Jul 2016 Piscataway, NJ 08854, USA.

Paper

A preliminary study on conversion efficiency improvement of a multi-junction PV cell with MPPT

Das, Narottam, Wongsodihardjo, Hendy and Islam, Syed. 2016. "A preliminary study on conversion efficiency improvement of a multi-junction PV cell with MPPT." Jayaweera, Dilan (ed.) Smart power systems and renewable energy system integration. Switzerland. Springer. pp. 49-73

Edited book (chapter)

Determination of drying characteristics of biomass residues to be used as a renewable fuel

Al Kassir, Awf, Yusaf, Talal, Al Karany, Raul Kassir and Hamawand, Ihsan. 2015. "Determination of drying characteristics of biomass residues to be used as a renewable fuel." Journal of Biotechnology. 208 (Supplement), pp. S15-S15. https://doi.org/10.1016/j.jbiotec.2015.06.034

Article

A dynamic tester to evaluate the thermal and moisture behaviour of the surface of textiles

Li, Wenbin, Xu, Weilin, Wang, Hao and Wang, Xin. 2016. "A dynamic tester to evaluate the thermal and moisture behaviour of the surface of textiles." Journal of Thermal Biology. 55, pp. 14-19. https://doi.org/10.1016/j.jtherbio.2015.11.005

Article

Compositional, microstructural and mechanical properties of ambient condition cured alkali-activated cement

Zhang, Zuhua, Li, Liangfeng, Ma, Xue and Wang, Hao. 2016. "Compositional, microstructural and mechanical properties of ambient condition cured alkali-activated cement." Construction and Building Materials. 113, pp. 237-245. https://doi.org/10.1016/j.conbuildmat.2016.03.043

Article

Synthesis of an intrinsically flame retardant bio-based benzoxazine resin

Yan, Hongquiang, Sun, Chuang, Fang, Zhengping, Liu, Xiaoqing, Zhu, Jin and Wang, Hao. 2016. "Synthesis of an intrinsically flame retardant bio-based benzoxazine resin." Polymer. 97, pp. 418-427. https://doi.org/10.1016/j.polymer.2016.05.053

Article

The pore characteristics of geopolymer foam concrete and their impact on the compressive strength and modulus

Zhang, Zuhua and Wang, Hao. 2016. "The pore characteristics of geopolymer foam concrete and their impact on the compressive strength and modulus." Frontiers in Materials. 3, pp. 1-11. https://doi.org/10.3389/fmats.2016.00038

Article

Pulp and paper industry - trends for the future

Dahlquist, Erik and Bundschuh, Jochen. 2013. "Pulp and paper industry - trends for the future." Dahlquist, Erik (ed.) Biomass as energy source: resources, systems and applications. United Kingdom. CRC Press. pp. 229-233

Edited book (chapter)

System aspects of biomass use in complex applications: biorefineries for production of heat, electric power and chemicals

Dahlquist, Erik and Bundschuh, Jochen. 2013. "System aspects of biomass use in complex applications: biorefineries for production of heat, electric power and chemicals." Dahlquist, Erik (ed.) Biomass as energy source: resources, systems and applications. London, United Kingdom. CRC Press. pp. 137-139

Edited book (chapter)

Fly ash-based geopolymer: clean production, properties and applications

Zhuang, Xiao Yu, Chen, Liang, Komarneni, Sridhar, Zhou, Chun Hui, Tong, Dong Shen, Yang, Hui Min, Yu, Wei Hua and Wang, Hao. 2016. "Fly ash-based geopolymer: clean production, properties and applications." Journal of Cleaner Production. 125, pp. 253-267. https://doi.org/10.1016/j.jclepro.2016.03.019

Article

Conversion of local industrial wastes into greener cement through geopolymer technology: a case study of high-magnesium nickel slag

Zhang, Zuhua, Zhu, Yingcan, Yang, Tao, Li, Liangfeng, Zhu, Huajun and Wang, Hao. 2017. "Conversion of local industrial wastes into greener cement through geopolymer technology: a case study of high-magnesium nickel slag." Journal of Cleaner Production. 141, pp. 463-471. https://doi.org/10.1016/j.jclepro.2016.09.147

Article

Microstructure and properties of Mg-Nd-Zn-Zr alloys

Wang, H., Ning, Z. L., Liang, W. Z., Cao, F. Y. and Sun, J. F.. 2010. "Microstructure and properties of Mg-Nd-Zn-Zr alloys." 2009 International Conference and Exhibition on Materials and AustCeram (MA 2009). Gold Coast, Australia 01 - 03 Jul 2009 Melbourne, Australia.

Paper

Hemp hurd based carbon template for reaction formed silicon carbide ceramic

Yan, Z. L., Ma, T., Zhang, J. C., Zhang, H. and Wang, H.. 2013. "Hemp hurd based carbon template for reaction formed silicon carbide ceramic." Hoa, Suong Van and Hubert, Pascal (ed.) 19th International Conference on Composite Materials (ICCM-19). Montreal, Canada 28 Jul - 02 Aug 2013 Canada.

Paper

Mechanical properties of sandwich composite made of syntactic foam core and GFRP skins

Salleh, Zulzamri, Islam, Md Mainul, Epaarachchi, Jayantha Ananda and Su, Haibin. 2016. "Mechanical properties of sandwich composite made of syntactic foam core and GFRP skins." AIMS Material Science. 3 (4), pp. 1704-1727. https://doi.org/10.3934/matersci.2016.4.1704

Article

Numerical modeling of gas flow in coal pores for methane drainage

Taheri, Adel, Sereshki, Farhang, Ardejani, Faramarz Doulati and Mirzaghorbanali, Ali. 2016. "Numerical modeling of gas flow in coal pores for methane drainage." Journal of Sustainable Mining. 15, pp. 95-99. https://doi.org/10.1016/j.jsm.2016.10.001

Article

Behavior of fiber glass bolts, rock bolts and cable bolts in shear

Li, Xuwei, Aziz, Naj, Mirzaghorbanali, Ali and Nemcik, Jan. 2016. "Behavior of fiber glass bolts, rock bolts and cable bolts in shear." Rock Mechanics and Rock Engineering. 49 (7), pp. 2723-2735. https://doi.org/10.1007/s00603-015-0907-7

Article

« Previous