Effects of light crude oil contamination on the physical and mechanical properties of fine sand
Article
Article Title | Effects of light crude oil contamination on the physical and mechanical properties of fine sand |
---|---|
ERA Journal ID | 31052 |
Article Category | Article |
Authors | Abousnina, Rajab M. (Author), Manalo, Allan (Author), Shiau, Jim (Author) and Lokuge, Weena (Author) |
Journal Title | Soil and Sediment Contamination: an international journal |
Journal Citation | 24 (8), pp. 833-845 |
Number of Pages | 13 |
Year | 2015 |
Place of Publication | London, United Kingdom |
ISSN | 1532-0383 |
1549-7887 | |
Digital Object Identifier (DOI) | https://doi.org/10.1080/15320383.2015.1058338 |
Web Address (URL) | http://www.tandfonline.com/doi/full/10.1080/15320383.2015.1058338 |
Abstract | The use of oil-contaminated sand in building and construction is now being considered as an alternative and cost-effective way to minimize its adverse effect on the environment. To achieve this, the effect of oil contamination on the important mechanical properties of sand should be investigated first. This study investigated the effect of petroleum-derived contaminants on the water absorption, permeability, cohesion, friction angle, and shear strength of fine sand. Contaminated samples were prepared by mixing fine sand with different percentages of light crude oil (0 to 20%). The results indicated that the water absorption of fine sand decreases with an increase in crude oil. An increase in the cohesion was observed for sand with up to 1% of oil contamination, after which the cohesion began to decrease, which also results in the reduction in the permeability. A slight reduction in the friction angle was found for oil-contaminated fine sand. At a low normal stress of 50 kPa, as the percentage of light crude oil increased, the shear strength increased up to 1% of oil contamination and then it decreased. These results provided useful information on how oil contaminated sand can be used safely and effectively in building and construction. |
Keywords | mechanical properties, contamination, produced water, light crude oil shear strength |
ANZSRC Field of Research 2020 | 400502. Civil geotechnical engineering |
Public Notes | Files associated with this item cannot be displayed due to copyright restrictions. |
Byline Affiliations | School of Civil Engineering and Surveying |
Institution of Origin | University of Southern Queensland |
https://research.usq.edu.au/item/q3ww7/effects-of-light-crude-oil-contamination-on-the-physical-and-mechanical-properties-of-fine-sand
1628
total views10
total downloads6
views this month0
downloads this month