Modelling flexural performance of hollow pultruded FRP profiles
Article
Alhawamdeh, Mohammad, Alajarmeh, Omar, Aravinthan, Thiru, Shelley, Tristan, Schubel, Peter, Mohammad, Ali and Zeng, Xuesen. 2021. "Modelling flexural performance of hollow pultruded FRP profiles." Composite Structures. 276. https://doi.org/10.1016/j.compstruct.2021.114553
| Article Title | Modelling flexural performance of hollow pultruded FRP profiles |
|---|---|
| ERA Journal ID | 3731 |
| Article Category | Article |
| Authors | Alhawamdeh, Mohammad (Author), Alajarmeh, Omar (Author), Aravinthan, Thiru (Author), Shelley, Tristan (Author), Schubel, Peter (Author), Mohammad, Ali (Author) and Zeng, Xuesen (Author) |
| Journal Title | Composite Structures |
| Journal Citation | 276 |
| Article Number | 114553 |
| Number of Pages | 17 |
| Year | 2021 |
| Publisher | Elsevier |
| Place of Publication | United Kingdom |
| ISSN | 0263-8223 |
| 1879-1085 | |
| Digital Object Identifier (DOI) | https://doi.org/10.1016/j.compstruct.2021.114553 |
| Web Address (URL) | https://www.sciencedirect.com/science/article/pii/S0263822321010151 |
| Abstract | Hollow Pultruded Fibre-Reinforced Polymer (PFRP) profiles, as novel construction material, require further development of design tool to broaden the applications. This paper proposes a combined experimental and numerical methodology as a design tool to investigate the failure modes of these profiles under four-point bending. Two different profiles, each with 10 samples, were tested until failure and were used to validate the numerical model. A finite element model was built based on a fast-convergence incremental approach that suits flexural loading and reduces the computational cost. The validated model was used to study the failure sequence thoroughly and perform an extensive parametric study on the design parameters. Each geometric parameter was studied individually first to determine the relevant levels for each parameter in the full factorial study. A full factorial design of experiment was used to capture the critical parametric interactions with over 81 numerical models. The design rules and recommendation were established for the optimal flexural behaviour of hollow box PFRP profiles to withstand local buckling of the top flange. |
| Keywords | hollow GFRP profiles, finite element analysis, local buckling, flexural failure |
| Contains Sensitive Content | Does not contain sensitive content |
| ANZSRC Field of Research 2020 | 400510. Structural engineering |
| 401602. Composite and hybrid materials | |
| 400505. Construction materials | |
| Public Notes | File reproduced in accordance with the copyright policy of the publisher/author. |
| Byline Affiliations | Centre for Future Materials |
| Wagners Composite Fibre Technologies, Australia | |
| Institution of Origin | University of Southern Queensland |
| Funding source | Grant ID CRCPSIX000117 |
Permalink -
https://research.usq.edu.au/item/q69xv/modelling-flexural-performance-of-hollow-pultruded-frp-profiles
Download files
169
total views217
total downloads9
views this month4
downloads this month
Export as
Related outputs
Integrated finite element analysis and machine learning approach for propagation pressure prediction in hybrid Steel-CFRP subsea pipelines
Alrsai, Mahmoud, Alsahalen, Ala’, Karampour, Hassan, Alhawamdeh, Mohammad and Alajrmeh, Omar. 2024. "Integrated finite element analysis and machine learning approach for propagation pressure prediction in hybrid Steel-CFRP subsea pipelines." Ocean Engineering. 311 (Part 1). https://doi.org/10.1016/j.oceaneng.2024.118808The Influence of Fibres on the Properties and Sustainability of Oil-Impacted Concrete
Aljuaydi, Fahad, Abousnina, Rajab, Alajarmeh, Omar and Alajmi, Abdalrahman. 2024. "The Influence of Fibres on the Properties and Sustainability of Oil-Impacted Concrete." Sustainability. 16 (17). https://doi.org/10.3390/su16177344Corrigendum “Integrated finite element analysis and machine learning approach for propagation pressure prediction in hybrid Steel-CFRP subsea pipelines” [Ocean Eng. 311 (1) (2024) 118808]
Alrsai, Mahmoud, Alsahalen, Ala’, Karampour, Hassan, Alhawamdeh, Mohammad and Alajrmeh, Omar. 2024. "Corrigendum “Integrated finite element analysis and machine learning approach for propagation pressure prediction in hybrid Steel-CFRP subsea pipelines” [Ocean Eng. 311 (1) (2024) 118808] ." Ocean Engineering. 311 (Part 1). https://doi.org/10.1016/j.oceaneng.2024.119051Supplementary Dam Site Selection Using a Geospatial Approach: A Case Study of Wivenhoe Dam
Zytoon, Aseel, Gharineiat, Zahra and Alajarmeh, Omar. 2024. "Supplementary Dam Site Selection Using a Geospatial Approach: A Case Study of Wivenhoe Dam." ISPRS International Journal of Geo-Information. 13 (6). https://doi.org/10.3390/ijgi13060180Modified Shear Design Model for Steel- and Fiber-Reinforced Polymer-Reinforced Concrete Beams
Tarawneh, A. N., Saleh, E. F., Alghossoon, A. M., Almasabha, G. S., Alajarmeh, O. S., Manalo, A. and Benmokrane, B.. 2024. "Modified Shear Design Model for Steel- and Fiber-Reinforced Polymer-Reinforced Concrete Beams." ACI Structural Journal. 121 (1), pp. 147-158. https://doi.org/10.14359/51739191New prediction model for the screw pull-out strength of polymer composite railway sleepers
Yu, Peng, Manalo, Allan, Ferdous, Wahid, Salih, Choman, Abousnina, Rajab, Heyer, Tom and Schubel, Peter. 2024. "New prediction model for the screw pull-out strength of polymer composite railway sleepers." Construction and Building Materials. 433. https://doi.org/10.1016/j.conbuildmat.2024.136720Effects of through-thickness dielectric sensor on carbon fibre epoxy cure monitoring
Hall, Molly, Zeng, Xuesen, Shelley, Tristan and Schubel, Peter. 2024. "Effects of through-thickness dielectric sensor on carbon fibre epoxy cure monitoring." Composites Part A: Applied Science and Manufacturing. 182. https://doi.org/10.1016/j.compositesa.2024.108168Flexural behaviour of the segmental precast concrete decks post-tensioned by GFRP rods
Ebrahimzadeh, Shahrad, Manalo, Allan, Alajarmeh, Omar, Yang, Xian, Sorbello, Charles Dean, Weerakoon, Senarath, Hassanli, Reza and Benmokrane, Brahim. 2024. "Flexural behaviour of the segmental precast concrete decks post-tensioned by GFRP rods." Structures. 65. https://doi.org/10.1016/j.istruc.2024.106712Application of waste glass powder in cemenitious grouts
Entezam, Alireza, Nourizadeh, Hadi, Mirzaghorbanali, Ali, Burey, Polly, Shelley, Tristan and Aziz, Naj. 2024. "Application of waste glass powder in cemenitious grouts." Aziz, N. and Mirzaghorbanali, A. (ed.) 2024 Resource Operators Conference (ROC2024). Wollongong, Australia 13 - 16 Feb 2024 Australia. University of Wollongong.Stochastic modelling of out-of-autoclave epoxy composite cure cycles under uncertainty
Hall, Molly, Zeng, Xuesen, Shelley, Tristan and Schubel, Peter. 2024. "Stochastic modelling of out-of-autoclave epoxy composite cure cycles under uncertainty." Composites Part A: Applied Science and Manufacturing. 180. https://doi.org/10.1016/j.compositesa.2024.108110Database evaluation and reliability calibration for flexural strength of hybrid FRP/steel-RC Beams
Tarawneh, Ahmad, Alajarmeh, Omar, Alawadi, Roaa, Amirah, Hadeel and Alramadeen, Razan. 2024. "Database evaluation and reliability calibration for flexural strength of hybrid FRP/steel-RC Beams." Composite Structures. 329. https://doi.org/10.1016/j.compstruct.2023.117758Formation of non-uniform fibre distribution and its effect on the flexural performance of pultruded GFRP box beams
Qi, Songming, Alajarmeh, Omar, Alhawamdeh, Mohammad, Shelley, Tristan, Schubel, Peter, Rendle-Short, Kendric and Zeng, Xuesen. 2024. "Formation of non-uniform fibre distribution and its effect on the flexural performance of pultruded GFRP box beams." Composite Structures. 327. https://doi.org/10.1016/j.compstruct.2023.117695Durability of hybrid flax fibre-reinforced epoxy composites with graphene in hygrothermal environment
Oun, Amer, Alajarmeh, Omar, Manalo, Allan and Gerdes, Andreas. 2024. "Durability of hybrid flax fibre-reinforced epoxy composites with graphene in hygrothermal environment ." Construction and Building Materials. 420. https://doi.org/10.1016/j.conbuildmat.2024.135584Recyclability of unidirectional reinforced pultruded thermoplastic profiles into composite laminates
Kravtsova, Valentina, Minchenkov, Kirill, Gusev, Sergey, Evlashin, Stanislav, Bondareva, Julia, Alajarmeh, Omar and Safonov, Alexander. 2024. "Recyclability of unidirectional reinforced pultruded thermoplastic profiles into composite laminates." Composites Communications. 46. https://doi.org/10.1016/j.coco.2024.101843Flexural behaviour of GFRP-reinforced concrete pontoon decks under static four-point and uniform loads
Ebrahimzadeh, Shahrad, Yang, Xian, Manalo, Allan, Alajarmeh, Omar, Senselova, Zaneta, Sorbello, Charles Dean, Weerakoon, Senarath and Benmokrane, Brahim. 2024. "Flexural behaviour of GFRP-reinforced concrete pontoon decks under static four-point and uniform loads." Structures. 59. https://doi.org/10.1016/j.istruc.2023.105796Finite element analysis and experimental validation of polymer–metal contacts in block-on-ring configuration
Awwad, K. Y. Eayal, Fallahnezhad, Khosro, Yousif, B. F., Mostafa, Ahmad, Alajarmeh, Omar, Shalwan, A. and Zeng, Xuesen. 2024. "Finite element analysis and experimental validation of polymer–metal contacts in block-on-ring configuration." Friction. 12 (3), pp. 554-568. https://doi.org/10.1007/s40544-023-0795-xCircular economy barriers in Australia: How to translate theory into practice?
Feldman, Jessica, Seligmann, Hannah, King, Sarah, Flynn, Matthew, Shelley, Tristan, Helwig, Andreas and Burey, Paulomi (Polly). 2024. "Circular economy barriers in Australia: How to translate theory into practice?" Sustainable Production and Consumption. 45, pp. 582-597. https://doi.org/10.1016/j.spc.2024.02.001Robustness of Deep Transfer Learning-Based Crack Detection against Uncertainty in Hyperparameter Tuning and Input Data
Nguyen, Andy, Chianese, Riccardo R., Gharehbaghi, Vahid R., Perera, Ruveen, Low, Tobias, Aravinthan, Thiru, Yu, Yang, Samali, Bijan, Guan, Hong, Khuc, Tung and Le, Thach N.. 2022. "Robustness of Deep Transfer Learning-Based Crack Detection against Uncertainty in Hyperparameter Tuning and Input Data." Guan, Hong, Chan, Tommy H. T. and Li, Jianchun (ed.) Recent Advances in Structural Health Monitoring Research in Australia. New York, United States. Nova Science Publishers. pp. 215-243Experimental and numerical analyses of the thermoplastic pultrusion of large structural profiles
Minchenkov, Kirill, Gusev, Sergey, Sulimov, Artem, Alajarmeh, Omar, Sergeichev, Ivan and Safonov, Alexander. 2023. "Experimental and numerical analyses of the thermoplastic pultrusion of large structural profiles." Materials and Design. 232. https://doi.org/10.1016/j.matdes.2023.112149Torsional behavior of GFRP-reinforced concrete pontoon decks with and without an edge cutout
Manalo, Allan, Yang, Xian, Alajarmeh, Omar, Benmokrane, Brahim, Gharineiat, Zahra, Ebrahimzadeh, Shahrad, Sorbello, Charles-Dean and Weerakoon, Senarath. 2023. "Torsional behavior of GFRP-reinforced concrete pontoon decks with and without an edge cutout." Marine Structures. 88. https://doi.org/10.1016/j.marstruc.2022.103345Data-driven machine learning methodology for designing slender FRP-RC columns
Tarawneh, Ahmad, Almasabha, Ghassan, Saleh, Eman, Alghossoon, Abdullah and Alajarmeh, Omar. 2023. "Data-driven machine learning methodology for designing slender FRP-RC columns." Structures. 57. https://doi.org/10.1016/j.istruc.2023.105207Corrigendum to “Experimental and numerical analyses of the thermoplastic pultrusion of large structural profiles” [Mater. Design 232 (2023) 112149]
Minchenkov, Kirill, Gusev, Sergey, Sulimov, Artem, Alajarmeh, Omar, Sergeichev, Ivan and Safonov, Alexander. 2023. "Corrigendum to “Experimental and numerical analyses of the thermoplastic pultrusion of large structural profiles” [Mater. Design 232 (2023) 112149] ." Materials and Design. 233. https://doi.org/10.1016/j.matdes.2023.112236Dielectric parameter independent curing analysis of out-of-autoclave carbon fibre/epoxy composites
Hall, Molly, Zeng, Xuesen, Shelley, Tristan and Schubel, Peter. 2023. "Dielectric parameter independent curing analysis of out-of-autoclave carbon fibre/epoxy composites." Composites Part A: Applied Science and Manufacturing. 175. https://doi.org/10.1016/j.compositesa.2023.107755Characterisation of Curing of Vinyl Ester Resin in an Industrial Pultrusion Process: Influence of Die Temperature
Chaparala, Sai Ajay Chandra, Alajarmeh, Omar, Shelley, Tristan, Zeng, Xuesen, Rendle-Short, Kendric, Voice, Dean and Schubel, Peter. 2023. "Characterisation of Curing of Vinyl Ester Resin in an Industrial Pultrusion Process: Influence of Die Temperature." Polymers. 15 (18). https://doi.org/10.3390/polym15183808Fatigue behavior of unidirectional fiber-reinforced pultruded composites with high volume fiber fraction
Alajarmeh, Omar, Manalo, Allan, Ferdous, Wahid, Almasabha, Ghassan, Tarawneh, Ahmad, Awwad, Khaled Eayal, Safonov, Alexander, Zeng, Xuesen and Schubel, Peter. 2023. "Fatigue behavior of unidirectional fiber-reinforced pultruded composites with high volume fiber fraction." Fatigue and Fracture of Engineering Materials and Structures. 46 (6), pp. 2034-2048. https://doi.org/10.1111/ffe.13979Investigation of Circular Hollow Concrete Columns Reinforced with GFRP Bars and Spirals
Ahmad, Afaq, Bahrami, Alireza, Alajarmeh, Omar, Chairman, Nida and Yaqub, Muhammad. 2023. "Investigation of Circular Hollow Concrete Columns Reinforced with GFRP Bars and Spirals." Buildings. 13 (4). https://doi.org/10.3390/buildings13041056Formation of non-uniform fibre distributions in winding-pultrusion process and its effect on axial compressive properties of hollow GFRP profiles
Qi, Songming, Alajarmeh, Omar, Shelley, Tristan, Schubel, Peter, Rendle-Short, Kendric and Zeng, Xuesen. 2023. "Formation of non-uniform fibre distributions in winding-pultrusion process and its effect on axial compressive properties of hollow GFRP profiles ." Composites Part A: Applied Science and Manufacturing. 173. https://doi.org/10.1016/j.compositesa.2023.107659A Schiff base-coated ammonia polyphosphate for improving thermal and fire-retardant properties of unsaturated polyester
Zhang, Jianzhong, Fang, Yang, Zhang, Anlin, Yu, Youming, Liu, Lina, Huo, Siqi, Zeng, Xuesen, Peng, Hong and Song, Pingan. 2023. "A Schiff base-coated ammonia polyphosphate for improving thermal and fire-retardant properties of unsaturated polyester." Progress in Organic Coatings. 185. https://doi.org/10.1016/j.porgcoat.2023.107910Engineering phosphorus-containing lignin for epoxy biocomposites with enhanced thermal stability, fire retardancy and mechanical properties
Zhang, Anlin, Zhang, Jianzhong, Liu, Lina, Dai, Jinfeng, Lu, Xinyu, Huo, Siqi, Hong, Min, Liu, Xiaohuan, Lynch, Mark, Zeng, Xuesen, Burey, Paulomi and Song, Pingan. 2023. "Engineering phosphorus-containing lignin for epoxy biocomposites with enhanced thermal stability, fire retardancy and mechanical properties." Journal of Materials Science and Technology. 167, pp. 82-93. https://doi.org/10.1016/j.jmst.2023.06.004Shape memory polymer composite circular and square hollow members for deployable structures
Emmanuel, K.D.C., Jeewantha, L.H.J., Herath, H.M.C.M., Epaarachchi, J.A. and Aravinthan, T.. 2023. "Shape memory polymer composite circular and square hollow members for deployable structures ." Composites Part A: Applied Science and Manufacturing. 171. https://doi.org/10.1016/j.compositesa.2023.107559An iron phenylphosphinate@graphene oxide nanohybrid enabled flame-retardant, mechanically reinforced, and thermally conductive epoxy nanocomposites
Chen, Qiang, Liu, Lei, Zhang, Anlin, Wang, Wenduo, Wang, Zhengzhou, Zhang, Jianzhong, Feng, Jiabing, Huo, Siqi, Zeng, Xuesen and Song, Pingan. 2023. "An iron phenylphosphinate@graphene oxide nanohybrid enabled flame-retardant, mechanically reinforced, and thermally conductive epoxy nanocomposites." Chemical Engineering Journal. 454. https://doi.org/10.1016/j.cej.2022.140424Construction and Deconstruction: Materials and substances from 'waste'
Burey, Paulomi, Feldman, Jessica, Seligmann, Hannah, Song, Eric, Flynn, Matthew, Helwig, Andreas, Gharineiat, Zahra, Seneviratne, Dinuki, Whiteside, Eliza, Shelley, Tristan, Priesler, Nils, Manalo, Allan, Mirzaghorbanali, Ali, Nourizadeh, Hadi, Roberts, Michae, Nicol, Rose, Redmond, Petrea, Lynch, Mark, Dearnaley, John, ..., Germon, Geoff. 2023. "Construction and Deconstruction: Materials and substances from 'waste'." Chemistry in Australia. (June-August 2023), pp. 16-21.Tribological and mechanical performances of newly developed eco-epoxy composites incorporating flax fibres and graphene nanoplatelets
Awwad, KY Eayal, Yousif, BF, Mostafa, Ahmad, Alajarmeh, Omar and Zeng, Xuesen. 2023. "Tribological and mechanical performances of newly developed eco-epoxy composites incorporating flax fibres and graphene nanoplatelets." Journal of Reinforced Plastics and Composites. 42 (17-18), p. 939–952. https://doi.org/10.1177/07316844221143451Fibre waviness characterisation and modelling by Filtered Canny Misalignment Analysis (FCMA)
Alajarmeh, Omar, Qi, Songming, Shelley, Tristan, Schubel, Peter, Rendle-Short, Kendric and Zeng, Xuesen. 2023. "Fibre waviness characterisation and modelling by Filtered Canny Misalignment Analysis (FCMA)." Composite Structures. 307. https://doi.org/10.1016/j.compstruct.2023.116666Damage onset analysis of optimized shape memory polymer composites during programming into curved shapes
Emmanuel, K. D. C., Jeewantha, L. H. J., Herath, H. M. C. M., Epaarachchi, J. A. and Aravinthan, T.. 2022. "Damage onset analysis of optimized shape memory polymer composites during programming into curved shapes." Materialia. 26, pp. 1-11. https://doi.org/10.1016/j.mtla.2022.101599Design optimisation of hollow box pultruded FRP profiles using mixed integer constrained Genetic algorithm
Alhawamdeh, Mohammad, Alajarmeh, Omar, Aravinthan, Thiru, Shelley, Tristan, Schubel, Peter, Mohammed, Ali and Zeng, Xuesen. 2022. "Design optimisation of hollow box pultruded FRP profiles using mixed integer constrained Genetic algorithm." Composite Structures. 302, pp. 1-21. https://doi.org/10.1016/j.compstruct.2022.116247In situ Thermoset Cure Sensing: A Review of Correlation Methods
Hall, Molly, Zeng, Xuesen, Shelley, Tristan and Schubel, Peter. 2022. "In situ Thermoset Cure Sensing: A Review of Correlation Methods." Polymers. 14 (15), pp. 1-29. https://doi.org/10.3390/polym14152978Screw lateral restraint behaviour of timber and polymeric based railway sleepers
Yu, Peng, Manalo, Allan, Ferdous, Wahid, Salih, Choman, Heyer, Tom and Schubel, Peter. 2022. "Screw lateral restraint behaviour of timber and polymeric based railway sleepers." Engineering Failure Analysis. 139, pp. 1-18. https://doi.org/10.1016/j.engfailanal.2022.106514Influence of post-processing on the compressive behaviour of full-scale pultruded FRP columns: Holes and inserts
Alajarmeh, Omar, Alhawamdeh, Mohammad, Shelley, Tristan, Mohammed, Ali, Nicol, Lachlan, Schubel, Peter and Zeng, Xuesen. 2022. "Influence of post-processing on the compressive behaviour of full-scale pultruded FRP columns: Holes and inserts." Engineering Structures. 266, pp. 1-16. https://doi.org/10.1016/j.engstruct.2022.114547Influence of image noise on crack detection performance of deep convolutional neural networks
Chianese, R., Nguyen, A., Gharehbaghi, V. R., Aravinthan, T. and Noori, M.. 2021. "Influence of image noise on crack detection performance of deep convolutional neural networks." Cunha, A. and Caetano, E. (ed.) 10th International Conference on Structural Health Monitoring of Intelligent Infrastructure: Advanced Research and Real-World Applications (SHMII-10). Porto, Portugal 30 Jun - 02 Jul 2021 Winnipeg, Canada.Novel Bending Test Method for Polymer Railway Sleeper Materials
Salih, Choman, Manalo, Allan, Ferdous, Wahid, Abousnina, Rajab, Yu, Peng, Heyer, Tom and Schubel, Peter. 2021. "Novel Bending Test Method for Polymer Railway Sleeper Materials." Polymers. 13 (9), pp. 1-22. https://doi.org/10.3390/polym13091359Axial behaviour of precast concrete panels with hollow composite reinforcing systems
Al-Fakher, Usama, Manalo, Allan, Alajarmeh, Omar, Aravinthan, Thiru, Zhuge, Yan, Bai, Yu and Edoo, Azam. 2021. "Axial behaviour of precast concrete panels with hollow composite reinforcing systems." Structures. 32, pp. 76-86. https://doi.org/10.1016/j.istruc.2021.03.015Mechanical Properties of Macro Polypropylene Fibre-Reinforced Concrete
Abousnina, Rajab, Premasiri, Sachindra, Anise, Vilive, Lokuge, Weena, Vimonsatit, Vanissorn, Ferdous, Wahid and Alajarmeh, Omar. 2021. "Mechanical Properties of Macro Polypropylene Fibre-Reinforced Concrete." Polymers. 13 (23), pp. 1-26.Behaviour of timber-alternative railway sleeper materials under five-point bending
Salih, Choman, Manalo, Allan, Ferdous, Wahid, Yu, Peng, Heyer, Tom and Schubel, Peter. 2022. "Behaviour of timber-alternative railway sleeper materials under five-point bending." Construction and Building Materials. 316, pp. 1-12. https://doi.org/10.1016/j.conbuildmat.2021.125882Shear behaviour of hollow precast concrete-composite structures
Al-Fakher, Usama, Manalo, Allan, Ferdous, Wahid, Alajarmeh, Omar, Aravinthan, Thiru, Zhuge, Yan, Bai, Yu and Edoo, Azam. 2021. "Shear behaviour of hollow precast concrete-composite structures." Materials and Structures. 54 (2), pp. 1-18. https://doi.org/10.1617/s11527-021-01618-9Effect of Short Fibres in the Mechanical Properties of Geopolymer Mortar Containing Oil-Contaminated Sand
Abousnina, Rajab, Alsalmi, Haifa Ibrahim, Manalo, Allan, Allister, Rochstad Lim, Alajarmeh, Omar, Ferdous, Wahid and Jlassi, Khouloud. 2021. "Effect of Short Fibres in the Mechanical Properties of Geopolymer Mortar Containing Oil-Contaminated Sand." Polymers. 13 (17), pp. 1-21. https://doi.org/10.3390/polym13173008Behaviour of Polymer Filled Composites for Novel Polymer Railway Sleepers
Ferdous, Wahid, Manalo, Allan, Salih, Choman, Yu, Peng, Abousnina, Rajab, Heyer, Tom and Schubel, Peter. 2021. "Behaviour of Polymer Filled Composites for Novel Polymer Railway Sleepers." Polymers. 13 (8), pp. 1-13. https://doi.org/10.3390/polym13081324Bending and Shear Behaviour of Waste Rubber Concrete-Filled FRP Tubes with External Flanges
Ferdous, Wahid, Manalo, Allan, Alajarmeh, Omar S., Zhuge, Yan, Mohammed, Ali A., Bai, Yu, Aravinthan, Thiru and Schubel, Peter. 2021. "Bending and Shear Behaviour of Waste Rubber Concrete-Filled FRP Tubes with External Flanges." Polymers. 13 (15), pp. 1-18. https://doi.org/10.3390/polym13152500Effect of bending and compressive modulus of elasticity on the behaviour of timber-alternative railway sleepers supported by ballast
Salih, Choman, Manalo, Allan, Ferdous, Wahid, Yu, Peng, Abousnina, Rajab, Heyer, Tom and Schubel, Peter. 2021. "Effect of bending and compressive modulus of elasticity on the behaviour of timber-alternative railway sleepers supported by ballast." Case Studies in Construction Materials. 15, pp. 1-14. https://doi.org/10.1016/j.cscm.2021.e00597Concentrically loaded recycled aggregate geopolymer concrete columns reinforced with GFRP bars and spirals
Raza, Ali, Manalo, Allan C., Rafique, Umer, Alajarmeh, Omar S. and Khan, Qaiser Uz Zaman. 2021. "Concentrically loaded recycled aggregate geopolymer concrete columns reinforced with GFRP bars and spirals." Composite Structures. 268, pp. 1-16. https://doi.org/10.1016/j.compstruct.2021.113968Investigation on the physical, mechanical and microstructural properties of epoxy polymer matrix with crumb rubber and short fibres for composite railway sleepers
Yu, Peng, Manalo, Allan, Ferdous, Wahid, Abousnina, Rajab, Salih, Choman, Heyer, Tom and Schubel, Peter. 2021. "Investigation on the physical, mechanical and microstructural properties of epoxy polymer matrix with crumb rubber and short fibres for composite railway sleepers." Construction and Building Materials. 295, pp. 1-14. https://doi.org/10.1016/j.conbuildmat.2021.123700Bending behaviour of precast concrete slab with externally flanged hollow FRP tubes
Al-Fakher, Usama, Manalo, Allan, Ferdous, Wahid, Aravinthan, Thiru, Zhuge, Yan, Bai, Yu and Edoo, Azam. 2021. "Bending behaviour of precast concrete slab with externally flanged hollow FRP tubes." Engineering Structures. 241, pp. 1-10. https://doi.org/10.1016/j.engstruct.2021.112433Failure analysis and the effect of material properties on the screw pull-out behaviour of polymer composite sleeper materials
Yu, Peng, Manalo, Allan, Ferdous, Wahid, Salih, Choman, Abousnina, Rajab, Heyer, Tom and Schubel, Peter. 2021. "Failure analysis and the effect of material properties on the screw pull-out behaviour of polymer composite sleeper materials." Engineering Failure Analysis. 128, pp. 1-14. https://doi.org/10.1016/j.engfailanal.2021.105577Review on Local Buckling of Hollow Box FRP Profiles in Civil Structural Applications
Alhawamdeh, Mohammad, Alajarmeh, Omar, Aravinthan, Thiru, Shelley, Tristan, Schubel, Peter, Mohammed, Ali and Zeng, Xuesen. 2021. "Review on Local Buckling of Hollow Box FRP Profiles in Civil Structural Applications." Polymers. 13 (23), pp. 1-27. https://doi.org/10.3390/polym13234159Long-Term Water Absorption of Hybrid Flax Fibre-Reinforced Epoxy Composites with Graphene and Its Influence on Mechanical Properties
Oun, Amer, Manalo, Allan, Alajarmeh, Omar, Abousnina, Rajab and Gerdes, Andreas. 2022. "Long-Term Water Absorption of Hybrid Flax Fibre-Reinforced Epoxy Composites with Graphene and Its Influence on Mechanical Properties." Polymers. 14 (17). https://doi.org/10.3390/polym14173679Influence of Elevated Temperature on the Mechanical Properties of Hybrid Flax-Fiber-Epoxy Composites Incorporating Graphene
Manalo, Allan, Oun, Amer, Alajarmeh, Omar, Abousnina, Rajab and Gerdes, Andreas. 2022. "Influence of Elevated Temperature on the Mechanical Properties of Hybrid Flax-Fiber-Epoxy Composites Incorporating Graphene ." Polymers. 14 (9). https://doi.org/10.3390/polym14091841Data-Driven Flexural Stiffness Model of FRP-Reinforced Concrete Slender Columns
Almasabha, Ghassan, Tarawneh, Ahmad, Saleh, Eman and Alajarmeh, Omar. 2022. "Data-Driven Flexural Stiffness Model of FRP-Reinforced Concrete Slender Columns." Journal of Composites for Construction. 26 (3). https://doi.org/10.1061/(ASCE)CC.1943-5614.0001218Compression behavior of GFRP bars under elevated In-Service temperatures
Alajarmeh, Omar, Manalo, Allan, Benmokrane, Brahim, Schubel, Peter, Zeng, Xuesen, Ahmad, Afaq, Hassanli, Reza and Sorbello, Charles-Dean. 2022. "Compression behavior of GFRP bars under elevated In-Service temperatures." Construction and Building Materials. 314 (Part A). https://doi.org/10.1016/j.conbuildmat.2021.125675Influence of Filler Properties on the Axial Behaviour of Pultruded FRP Tubes
Al-Saadi, Ali Umran, Aravinthan, Thiru and Lokuge, Weena. 2022. "Influence of Filler Properties on the Axial Behaviour of Pultruded FRP Tubes ." 10th International Conference on FRP Composites in Civil Engineering (CICE 2020/2021). Istanbul, Turkey 08 - 10 Dec 2021 Switzerland . Springer. https://doi.org/10.1007/978-3-030-88166-5_43Effect of simulated hygrothermal environment on the flexural and interlaminar shear strength of particulate-filled epoxy-coated GFRP composites
Manalo, Allan, Alajarmeh, Omar, Ferdous, Wahid, Benmokrane, Brahim, Sorbello, Charles-Dean and Gerdes, Andreas. 2022. "Effect of simulated hygrothermal environment on the flexural and interlaminar shear strength of particulate-filled epoxy-coated GFRP composites ." Construction and Building Materials. 339. https://doi.org/10.1016/j.conbuildmat.2022.127687Development and mechanical performance evaluation of a GFRP-reinforced concrete boat-approach slab
Manalo, Allan, Alajarmeh, Omar, Yang, Xian, Ferdous, Wahid, Ebrahimzadeh, Shahrad, Benmokrane, Brahim, Sorbello, Charles-Dean, Weerakoon, Senarath and Lutze, Darren. 2022. "Development and mechanical performance evaluation of a GFRP-reinforced concrete boat-approach slab." Structures. 46, pp. 73-87. https://doi.org/10.1016/j.istruc.2022.10.040A novel technique to improve the compressive strength and ductility of glass fiber reinforced polymer (GFRP) composite bars
Liu, Yue, Zhang, Hong-Tao, Tafsirojjaman, T., Dogar, Attiq Ur Rahman, Alajarmeh, Omar Al, Yue, Qing-Rui and Manalo, Allan. 2022. "A novel technique to improve the compressive strength and ductility of glass fiber reinforced polymer (GFRP) composite bars." Construction and Building Materials. 326, pp. 1-18. https://doi.org/10.1016/j.conbuildmat.2022.126782Numerical Optimisation of Structural Behaviour of Hollow Box Pulwound Fibre Composite Profiles
Alhawamdeh, Mohammad Ahmad Abdel Rahman. 2022. Numerical Optimisation of Structural Behaviour of Hollow Box Pulwound Fibre Composite Profiles. PhD by Publication Doctor of Philosophy. University of Southern Queensland. https://doi.org/10.26192/q7q8wUnderstanding joint formation in thermoset composite welding (TCW) joints
Shelley, Tristan James. 2015. Understanding joint formation in thermoset composite welding (TCW) joints. PhD Thesis Doctor of Philosophy. University of Queensland. https://doi.org/10.14264/uql.2015.953Failure analysis and design of grouted fibre-composite repair system for corroded steel pipes
Shamsuddoha, Md, Manalo, Allan, Aravinthan, Thiru, Islam, Md Mainul and Djukic, Luke. 2021. "Failure analysis and design of grouted fibre-composite repair system for corroded steel pipes." Engineering Failure Analysis. 119, pp. 1-15. https://doi.org/10.1016/j.engfailanal.2020.104979Thermomechanical and fire performance of DGEBA based shape memory polymer composites for constructions
Emmanuel, K. D. C., Herath, H. M. C. M., Jeewantha, L. H. J., Epaarachchi, J. A. and Aravinthan, T.. 2021. "Thermomechanical and fire performance of DGEBA based shape memory polymer composites for constructions." Construction and Building Materials. 303. https://doi.org/10.1016/j.conbuildmat.2021.124442Recycling of landfill wastes (tyres, plastics and glass) in construction – A review on global waste generation, performance, application and future opportunities
Ferdous, Wahid, Manalo, Allan, Siddique, Rafat, Mendis, Priyan, Zhuge, Yan, Wong, Hong S., Lokuge, Weena, Aravinthan, Thiru and Schubel, Peter. 2021. "Recycling of landfill wastes (tyres, plastics and glass) in construction – A review on global waste generation, performance, application and future opportunities." Resources, Conservation and Recycling. 173, pp. 1-13. https://doi.org/10.1016/j.resconrec.2021.105745Modelling hollow pultruded FRP profiles under axial compression: Local buckling and progressive failure
Alhawamdeh, Mohammad, Alajarmeh, Omar, Aravinthan, Thiru, Shelley, Tristan, Schubel, Peter, Kemp, Michael and Zeng, Xuesen. 2021. "Modelling hollow pultruded FRP profiles under axial compression: Local buckling and progressive failure." Composite Structures. 262, pp. 1-14. https://doi.org/10.1016/j.compstruct.2021.113650Synergistic effects of hygrothermal conditions and solar ultraviolet radiation on the properties of structural particulate-filled epoxy polymer coatings
Mehrinejad Khotbehsara, Mojdeh, Manalo, Allan, Aravinthan, Thiru, Ferdous, Wahid, Benmokrane, Brahim and Nguyen, Kate T. Q.. 2021. "Synergistic effects of hygrothermal conditions and solar ultraviolet radiation on the properties of structural particulate-filled epoxy polymer coatings." Construction and Building Materials. 277. https://doi.org/10.1016/j.conbuildmat.2021.122336Tensile Fatigue Behavior of Polyester and Vinyl Ester Based GFRP Laminates—A Comparative Evaluation
Ferdous, Wahid, Manalo, Allan, Yu, Peng, Salih, Choman, Abousnina, Rajab, Heyer, Tom and Schubel, Peter. 2021. "Tensile Fatigue Behavior of Polyester and Vinyl Ester Based GFRP Laminates—A Comparative Evaluation." Polymers. 13 (3), pp. 1-10. https://doi.org/10.3390/polym13030386Behaviour of continuous fibre composite sandwich core under low-velocity impact
Zangana, Sartip, Epaarachchi, Jayantha, Ferdous, Wahid, Leng, Jinsong and Schubel, Peter. 2021. "Behaviour of continuous fibre composite sandwich core under low-velocity impact." Thin-Walled Structures. 158, pp. 1-11. https://doi.org/10.1016/j.tws.2020.107157Manufacturing and structural performance of glass-fiber-reinforced precast-concrete boat ramp planks
Manalo, A.C., Alajarmeh, O., Cooper, D., Sorbello, C. D., Weerakoon, S. Z. and Benmokrane, B.. 2020. "Manufacturing and structural performance of glass-fiber-reinforced precast-concrete boat ramp planks." Structures. 28, pp. 37-56. https://doi.org/10.1016/j.istruc.2020.08.041Self-healing polymers: Synthesis methods and applications
Reddy, Kakarla Raghava, El-Zein, Abbas, Airey, David W., Alonso-Marroquin, Fernando, Schubel, Peter and Manalo, Allan. 2020. "Self-healing polymers: Synthesis methods and applications." Nano-Structures and Nano-Objects. 23, pp. 1-21. https://doi.org/10.1016/j.nanoso.2020.100500Comparative durability of GFRP composite reinforcing bars in concrete and in simulated concrete environments
Manalo, Allan, Maranan, Ginghis, Benmokrane, Brahim, Cousin, Patrice, Alajarmeh, Omar, Ferdous, Wahid, Liang, Ray and Hota, Gangarao. 2021. "Comparative durability of GFRP composite reinforcing bars in concrete and in simulated concrete environments." Cement and Concrete Composites. 109, pp. 1-14. https://doi.org/10.1016/j.cemconcomp.2020.103564Static behaviour of glass fibre reinforced novel composite sleepers for mainline railway track
Ferdous, Wahid, Manalo, Allan, Alajarmeh, Omar, Mohammed, Ali A., Salih, Choman, Yu, Peng, Mehrinejad Khotbehsara, Mojdeh and Schubel, Peter. 2021. "Static behaviour of glass fibre reinforced novel composite sleepers for mainline railway track." Engineering Structures. 229, pp. 1-11. https://doi.org/10.1016/j.engstruct.2020.111627Design considerations for prefabricated composite jackets for structural repair: Parametric investigation and case study
Mohammed, Ali A., Manalo, Allan, Ferdous, Wahid, Abousnina, Rajab, Alajarmeh, Omar, Vijay, P.V. and Benmokrane, Brahim. 2021. "Design considerations for prefabricated composite jackets for structural repair: Parametric investigation and case study." Composite Structures. 261, pp. 1-14. https://doi.org/10.1016/j.compstruct.2020.113288Effects of ultraviolet solar radiation on the properties of particulate-filled epoxy based polymer coating
Mehrinejad Khotbehsara, Mojdeh, Manalo, Allan, Aravinthan, Thiru, Turner, Joanna, Ferdous, Wahid and Hota, Gangarao. 2020. "Effects of ultraviolet solar radiation on the properties of particulate-filled epoxy based polymer coating." Polymer Degradation and Stability. 181, pp. 1-10. https://doi.org/10.1016/j.polymdegradstab.2020.109352Strengthening of headstocks in bridges with external post-tensioning
Aravinthan, Thiru. 2005. "Strengthening of headstocks in bridges with external post-tensioning." Andrews-Phaedonos, Fred, Corcoran, Brendan and Sanjayan, Jay (ed.) 22nd Biennial Conference of the Concrete Institute of Australia: Issues, Opportunities, Innovations. Melbourne, Australia 17 - 19 Oct 2005 Melbourne, Australia.Axial Behaviour of Damaged Concrete Columns Repaired with Novel Prefabricate FRP Jacket
Mohammed, Ali A., Manalo, Allan C., Alajarmeh, Omar, Zhuge, Yan and Pettigrew, John. 2021. "Axial Behaviour of Damaged Concrete Columns Repaired with Novel Prefabricate FRP Jacket." 10th International Conference on FRP Composites in Civil Engineering (CICE 2020/2021). Istanbul, Turkey 08 - 10 Dec 2021 Switzerland. Springer. https://doi.org/10.1007/978-3-030-88166-5_47Effect of thickness on the shape memory properties of bisphenol a epoxy based shape memory polymer composites
Emmanue, K. D. C., Jeewantha, J., Herath, M., Epaarachchi J. and Aravinthan T.. 2021. "Effect of thickness on the shape memory properties of bisphenol a epoxy based shape memory polymer composites." ASME 2021 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS2021). United States and Online United States. https://doi.org/10.1115/SMASIS2021-67111Compressive behaviour of hollow box pultruded FRP columns with continuous-wound fibres
Alajarmeh, Omar, Zeng, Xuesen, Aravinthan, Thiru, Shelley, Tristan, Alhawamdeh, Mohammad, Mohammed, Ali, Nicol, Lachlan, Vedernikov, Alexander, Safonov, Alexander and Schubel, Peter. 2021. "Compressive behaviour of hollow box pultruded FRP columns with continuous-wound fibres." Thin-Walled Structures. 168. https://doi.org/10.1016/j.tws.2021.108300Through-thickness permeability of woven fabric under increasing air pressure: theoretical framework and simulation
Xiao, Xueliang, Long, Andrew, Qian, Kun, Zeng, Xuesen and Hua, Tao. 2017. "Through-thickness permeability of woven fabric under increasing air pressure: theoretical framework and simulation." Textile Research Journal. 87 (13), pp. 1631-1642. https://doi.org/10.1177/0040517516657062Mechanical and thermal properties of glass fiber–vinyl ester resin composite for pipeline repair exposed to hot-wet conditioning
Shamsuddoha, Md, Djukic, Luke P., Islam, Md Mainul, Aravinthan, Thiru and Manalo, Allan. 2017. "Mechanical and thermal properties of glass fiber–vinyl ester resin composite for pipeline repair exposed to hot-wet conditioning." Journal of Composite Materials. 51 (11), pp. 1605-1617. https://doi.org/10.1177/0021998316661869State-of-the-art review on FRP sandwich systems for lightweight civil infrastructure
Manalo, Allan, Aravinthan, Thiru, Fam, Amir and Benmokrane, Brahim. 2017. "State-of-the-art review on FRP sandwich systems for lightweight civil infrastructure." Journal of Composites for Construction. 21 (1), pp. 1-16. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000729Influence of Graphene Nanoplatelets on Mechanical Properties and Adhesive Wear Performance of Epoxy-Based Composites
Eayal Awwad, K. Y., Yousif, B. F., Fallahnezhad, Khosro, Saleh, Khalid and Zeng, Xuesen. 2021. "Influence of Graphene Nanoplatelets on Mechanical Properties and Adhesive Wear Performance of Epoxy-Based Composites." Friction. 9 (4), pp. 856-875. https://doi.org/10.1007/s40544-020-0453-5Compressive behavior of hollow concrete columns reinforced with GFRP bars
Alajarmeh, Omar Saleh Awad. 2020. Compressive behavior of hollow concrete columns reinforced with GFRP bars. PhD Thesis Doctor of Philosophy. University of Southern Queensland. https://doi.org/10.26192/21yk-ne68Modelling squeeze flow of viscous polymer melts
Shelley, Tristan, Liu, Xiaolin, Viedt, Martin, Heitzmann, Michael and Paton, Rowan. 2014. "Modelling squeeze flow of viscous polymer melts." Oñate, E., Oliver, J. and Huerta, A. (ed.) 11th World Congress on Computational Mechanics (WCCM XI), 5th European Conference on Computational Mechanics (ECCM V), 6th European Conference on Computational Fluid Dynamics (ECFD VI). Barcelona, Spain 20 - 25 Jul 2014Numerical Investigation on Hollow Pultruded Fibre Reinforced Polymer Tube Columns
Al-Saadi, A.U., Aravinthan, T. and Lokuge, W.. 2020. "Numerical Investigation on Hollow Pultruded Fibre Reinforced Polymer Tube Columns." Wang, Chien Ming, Ho, Johnny C.M. and Kitipornchai, Sritawat (ed.) 25th Australasian Conference on Mechanics of Structures and Materials (ACMSM25). Brisbane, Australia 04 - 07 Dec 2018 Singapore. https://doi.org/10.1007/978-981-13-7603-0_45A study on rapid forming of aerospace stiffeners
Shelley, Tristan J,, Dickinson, Calum P. M., Tew, Hannah and Scaife, Richard J.. 2018. "A study on rapid forming of aerospace stiffeners." SAMPE Europe - Conference Southamphon 2018. Southampton, United Kingdom 11 - 13 Sep 2018 United Kingdom.Effect of fibre architecture on tensile pull-off behaviour of 3D woven composite T-joints
Yan, Shibo, Zeng, Xuesen and Long, Andrew. 2020. "Effect of fibre architecture on tensile pull-off behaviour of 3D woven composite T-joints." Composite Structures. 242, pp. 1-9. https://doi.org/10.1016/j.compstruct.2020.112194A New Design-Oriented Model of Glass Fiber-Reinforced Polymer-Reinforced Hollow Concrete Columns
Alajarmeh, O. S., Manalo, A. C., Benmokrane, B., Karunasena, W., Ferdous, W. and Mendis, P.. 2020. "A New Design-Oriented Model of Glass Fiber-Reinforced Polymer-Reinforced Hollow Concrete Columns." ACI Structural Journal. 117 (2), pp. 141-156. https://doi.org/10.14359/51720204Behavior of circular concrete columns reinforced with hollow composite sections and GFRP bars
Alajarmeh, Omar, Manalo, Allan, Benmokrane, Brahim, Ferdous, Wahid, Mohammed, Ali, Abousnina, Rajab, Elchalakani, Mohamed and Edoo, Azam. 2020. "Behavior of circular concrete columns reinforced with hollow composite sections and GFRP bars." Marine Structures. 72, pp. 1-17. https://doi.org/10.1016/j.marstruc.2020.102785Ageing of particulate-filled epoxy resin under hygrothermal conditions
Mehrinejad Khotbehsara, Mojdeh, Manalo, Allan, Aravinthan, Thiru, Ferdous, Wahid, Nguyen, Kate T.Q. and Hota, Gangarao. 2020. "Ageing of particulate-filled epoxy resin under hygrothermal conditions." Construction and Building Materials. 249, pp. 1-14. https://doi.org/10.1016/j.conbuildmat.2020.118846Testing and modelling the fatigue behaviour of GFRP composites – Effect of stress level, stress concentration and frequency
Ferdous, Wahid, Manalo, Allan, Peauril, Joshua, Salih, Choman, Reddy, Kakarla Raghava, Yu, Peng, Schubel, Peter and Heyer, Tom. 2020. "Testing and modelling the fatigue behaviour of GFRP composites – Effect of stress level, stress concentration and frequency." Engineering Science and Technology, an International Journal. 23 (5), pp. 1223-1232. https://doi.org/10.1016/j.jestch.2020.01.001Flexural behaviour of concrete slabs reinforced with GFRP bars and hollow composite reinforcing systems
Al-Rubaye, Mohammed, Manalo, Allan, Alajarmeh, Omar, Ferdous, Wahid, Lokuge, Weena, Benmokrane, Brahim and Edoo, Azam. 2020. "Flexural behaviour of concrete slabs reinforced with GFRP bars and hollow composite reinforcing systems." Composite Structures. 236, pp. 1-12. https://doi.org/10.1016/j.compstruct.2019.111836Performance of an innovative composite railway sleeper
Ferdous, Wahid, Manalo, Allan and Aravinthan, Thiru. 2017. "Performance of an innovative composite railway sleeper." 2017 Advanced Composites Innovation Conference. Gold Coast, Australia 28 - 30 Mar 2017Effect of elevated in-service temperature on the mechanical properties and microstructure of particulate-filled epoxy polymers
Mehrinejad Khotbehsara, Mojdeh, Manalo, Allan, Aravinthan, Thiru, Reddy, Kakarla Raghava, Ferdous, Wahid, Wong, Hong and Nazari, Ali. 2019. "Effect of elevated in-service temperature on the mechanical properties and microstructure of particulate-filled epoxy polymers." Polymer Degradation and Stability. 170, pp. 1-15. https://doi.org/10.1016/j.polymdegradstab.2019.108994
Composites for alternative railway sleepers
Ferdous, W., Manalo, A., Muttashar, M., Yu, P., Kakarla, R., Salih, C. and Schubel, P.. 2020. "Composites for alternative railway sleepers." 16th East Asian-Pacific Conference on Structural Engineering and Construction. Brisbane, Australia 04 - 06 Dec 2019 Singapore. https://doi.org/10.1007/978-981-15-8079-6_26Hollow concrete columns: review of structural behavior and new designs using GFRP reinforcement
Alajarmeh, O. S., Manalo, A. C., Benmokrane, B., Karunasena, K., Ferdous, W. and Mendis, P.. 2020. "Hollow concrete columns: review of structural behavior and new designs using GFRP reinforcement." Engineering Structures. 203, pp. 1-16. https://doi.org/10.1016/j.engstruct.2019.109829Novel testing and characterization of GFRP bars in compression
Alajarmeh, O. S., Manalo, A. C., Benmokrane, B., Vijay, P. V., Ferdous, W. and Mendis, P.. 2019. "Novel testing and characterization of GFRP bars in compression." Construction and Building Materials. 225, pp. 1112-1126. https://doi.org/10.1016/j.conbuildmat.2019.07.280Effect of spiral spacing and concrete strength on behavior of GFRP-reinforced hollow concrete columns
Alajarmeh, Omar S., Manalo, Allan C., Benmokrane, Brahim, Karunasena, Warna and Mendis, Priyan. 2020. "Effect of spiral spacing and concrete strength on behavior of GFRP-reinforced hollow concrete columns." Journal of Composites for Construction. 24 (1), pp. 1-14. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000987Optimal design for epoxy polymer concrete based on mechanical properties and durability aspects
Ferdous, Wahid, Manalo, Allan, Wong, Hong S., Abousnina, Rajab, Alajarmeh, Omar S., Zhuge, Yan and Schubel, Peter. 2020. "Optimal design for epoxy polymer concrete based on mechanical properties and durability aspects." Construction and Building Materials. 232, pp. 1-13. https://doi.org/10.1016/j.conbuildmat.2019.117229Axial performance of hollow concrete columns reinforced with GFRP composite bars with different reinforcement ratios
Alajarmeh, Omar S., Manalo, Allan C., Benmokrane, Brahim, Karunasena, Warna and Mendis, Priyan. 2019. "Axial performance of hollow concrete columns reinforced with GFRP composite bars with different reinforcement ratios." Composite Structures. 213 (1), pp. 153-164. https://doi.org/10.1016/j.compstruct.2019.01.096Compressive behavior of axially loaded circular hollow concrete columns reinforced with GFRP bars and spirals
Alajarmeh, O. S., Manalo, A. C., Benmokrane, B., Karunasena, W., Mendis, P. and Nguyen, K. T. Q.. 2019. "Compressive behavior of axially loaded circular hollow concrete columns reinforced with GFRP bars and spirals." Construction and Building Materials. 194, pp. 12-23. https://doi.org/10.1016/j.conbuildmat.2018.11.016Effects of fibre orientation and layup on the mechanical properties of the pultruded glass fibre reinforced polymer tubes
Al-Saadi, Ali Umran, Aravinthan, Thiru and Lokuge, Weena. 2019. "Effects of fibre orientation and layup on the mechanical properties of the pultruded glass fibre reinforced polymer tubes." Engineering Structures. 198, pp. 1-16. https://doi.org/10.1016/j.engstruct.2019.109448Meso-scale modelling of 3D woven composite T-joints with weave variations
Yan, Shibo, Zeng, Xuesen and Long, Andrew. 2019. "Meso-scale modelling of 3D woven composite T-joints with weave variations." Composites Science and Technology. 171, pp. 171-179. https://doi.org/10.1016/j.compscitech.2018.12.024Modelling heat transfer through an FBG optical fibre
Schubel, P., Umer, R. and Boateng, E. K. G.. 2018. "Modelling heat transfer through an FBG optical fibre." Composites Part A: Applied Science and Manufacturing. 109, pp. 184-196. https://doi.org/10.1016/j.compositesa.2018.02.031Composite reinforcing systems for precast hollow concrete slabs
Al-Fakher, Usama Hilo, Manalo, Allan, Aravinthan, Thiru and Edoo, Azam. 2019. "Composite reinforcing systems for precast hollow concrete slabs ." 7th Asia-Pacific Conference on FRP in Structures (APFIS 2019). Brisbane, Australia 10 - 13 Dec 2019 Australia.Modelling compaction variability in out-of-autoclave prepreg laminate
Bontch-Osmolovskaia, Daria, Zeng, Xuesen, Callus, Paul, Rider, Andrew, Chang, Paul and Schubel, Peter. 2019. "Modelling compaction variability in out-of-autoclave prepreg laminate." 22nd International Conference on Composite Materials (ICCM-22). Melbourne, Australia 11 - 16 Aug 2019 Australia.CRC-P Next Generation Pultrusion Processes
Schubel, Peter, Zeng, Xuesen, Shelley, Tristan and Alajarmeh, Omar. 2019. CRC-P Next Generation Pultrusion Processes. Toowoomba. University of Southern Queensland. https://doi.org/10.26192/3a7c-va16Structural applications of fibre reinforced polymer (FRP) composite tubes: a review of columns members
Al-Saadi, Ali Umran, Aravinthan, Thiru and Lokuge, Weena. 2018. "Structural applications of fibre reinforced polymer (FRP) composite tubes: a review of columns members." Composite Structures. 204, pp. 513-524. https://doi.org/10.1016/j.compstruct.2018.07.109Experimental assessment of the mechanical behaviour of 3D woven composite T-joints
Yan, Shibo, Zeng, Xuesen and Long, Andrew. 2018. "Experimental assessment of the mechanical behaviour of 3D woven composite T-joints." Composites Part B: Engineering. 154, pp. 108-113. https://doi.org/10.1016/j.compositesb.2018.08.007Flexural and shear behaviour of layered sandwich beams
Ferdous, Wahid, Manalo, Allan, Aravinthan, Thiru and Fam, Amir. 2018. "Flexural and shear behaviour of layered sandwich beams." Construction and Building Materials. 173, pp. 429-442. https://doi.org/10.1016/j.conbuildmat.2018.04.068Behaviour of composite sandwich beams with different shear span-to-depth ratios
Ferdous, Wahid, Manalo, Allan and Aravinthan, Thiru. 2017. "Behaviour of composite sandwich beams with different shear span-to-depth ratios." Hao, Hong and Zhang, Chunwei (ed.) 24th Australasian Conference on the Mechanics of Structures and Materials (ACMSM24). Perth, Australia 06 - 09 Dec 2016 London, United Kingdom. https://doi.org/10.1201/9781315226460-34Three-dimensional woven carbon fibre polymer composite beams and plates under ballistic impact
Turner, Paul, Liu, Tao, Zeng, Xuesen and Brown, Kevin. 2018. "Three-dimensional woven carbon fibre polymer composite beams and plates under ballistic impact." Composite Structures. 185, pp. 483-495. https://doi.org/10.1016/j.compstruct.2017.10.091Effect of yarn cross-sectional shape on resin flow through inter-yarn gaps in textile reinforcements
Endruweit, A., Zeng, X., Matveev, M. and Long, A. C.. 2018. "Effect of yarn cross-sectional shape on resin flow through inter-yarn gaps in textile reinforcements." Composites Part A: Applied Science and Manufacturing. 104, pp. 139-150. https://doi.org/10.1016/j.compositesa.2017.10.020Geometric modeling of 3D woven preforms in composite T-joints
Yan, Shibo, Zeng, Xuesen, Brown, Louise and Long, Andrew. 2018. "Geometric modeling of 3D woven preforms in composite T-joints." Textile Research Journal. 88 (16), pp. 1862-1875. https://doi.org/10.1177/0040517517712098Mechanical properties of polymer concrete with different types of resin
Lokuge, W. P. and Aravinthan, T.. 2013. "Mechanical properties of polymer concrete with different types of resin." Samali, Bijan, Attard, Mario M. and Song, Chongmin (ed.) 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM22). Sydney, Australia 11 - 14 Dec 2012 London, United Kingdom.Evaluation of an innovative composite railway sleeper for a narrow-gauge track under static load
Ferdous, Wahid, Manalo, Allan, Van Erp, Gerard, Aravinthan, Thiru and Ghabraie, Kazem. 2018. "Evaluation of an innovative composite railway sleeper for a narrow-gauge track under static load." Journal of Composites for Construction. 22 (2), pp. 1-13. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000833Effect of specimen history on structure and in-plane permeability of woven fabrics
Zeng, X., Endruweit, A. and Long, A. C.. 2015. "Effect of specimen history on structure and in-plane permeability of woven fabrics." Journal of Composite Materials. 49 (13), pp. 1563-1578. https://doi.org/10.1177/0021998314536070Modelling VARTM process induced variations on bending performance of composite Omega beams
Zeng, Xuesen, Schubel, Peter and Lorrillard, Julien. 2016. "Modelling VARTM process induced variations on bending performance of composite Omega beams." Composites Part A: Applied Science and Manufacturing. 90, pp. 371-379. https://doi.org/10.1016/j.compositesa.2016.08.004Collapse of 3D orthogonal woven carbon fibre composites under in-plane tension/compression and out-of-plane bending
Turner, P., Liu, T. and Zeng, X.. 2016. "Collapse of 3D orthogonal woven carbon fibre composites under in-plane tension/compression and out-of-plane bending." Composite Structures. 142, pp. 286-297. https://doi.org/10.1016/j.compstruct.2016.01.100An analytical model for through-thickness permeability of woven fabric
Xiao, Xueliang, Zeng, Xuesen, Long, Andrew, Lin, Hua, Clifford, Michael and Saldaeva, Elena. 2012. "An analytical model for through-thickness permeability of woven fabric." Textile Research Journal. 82 (5), pp. 492-501. https://doi.org/10.1177/0040517511414979Experimental study of dynamic air permeability for woven fabrics
Xiao, Xueliang, Zeng, Xuesen, Bandara, Palitha and Long, Andrew. 2012. "Experimental study of dynamic air permeability for woven fabrics." Textile Research Journal. 82 (9), pp. 920-930. https://doi.org/10.1177/0040517511429605Through-thickness permeability modelling of woven fabric under out-of-plane deformation
Xiao, Xueliang, Long, Andrew and Zeng, Xuesen. 2014. "Through-thickness permeability modelling of woven fabric under out-of-plane deformation." Journal of Materials Science. 49 (21), pp. 7563-7574. https://doi.org/10.1007/s10853-014-8465-zGeometrical modelling of 3D woven reinforcements for polymer composites: prediction of fabric permeability and composite mechanical properties
Zeng, Xuesen, Brown, Louise P., Endruweit, Andreas, Matveev, Mikhail and Long, Andrew C.. 2014. "Geometrical modelling of 3D woven reinforcements for polymer composites: prediction of fabric permeability and composite mechanical properties." Composites Part A: Applied Science and Manufacturing. 56, pp. 150-160. https://doi.org/10.1016/j.compositesa.2013.10.004Through-thickness air permeability of woven fabric under low pressure compression
Xiao, Xueliang, Hu, Jinlian, Hua, Tao, Zeng, Xuesen and Long, Andrew. 2015. "Through-thickness air permeability of woven fabric under low pressure compression." Textile Research Journal. 85 (16), pp. 1732-1742. https://doi.org/10.1177/0040517515569526Through-thickness permeability study of orthogonal and angle-interlock woven fabrics
Xiao, Xueliang, Endruweit, Andreas, Zeng, Xuesen, Hu, Jinlian and Long, Andrew. 2015. "Through-thickness permeability study of orthogonal and angle-interlock woven fabrics." Journal of Materials Science. 50 (3), pp. 1257-1266. https://doi.org/10.1007/s10853-014-8683-4Assessing the effect of fibre extraction processes on the strength of flax fibre reinforcement
Zeng, Xuesen, Mooney, Sacha J. and Sturrock, Craig J.. 2015. "Assessing the effect of fibre extraction processes on the strength of flax fibre reinforcement." Composites Part A: Applied Science and Manufacturing. 70, pp. 1-7. https://doi.org/10.1016/j.compositesa.2014.12.004Numerical prediction of in-plane permeability for multilayer woven fabrics with manufacture-induced deformation
Zeng, Xuesen, Endruweit, Andreas, Brown, Louise P. and Long, Andrew C.. 2015. "Numerical prediction of in-plane permeability for multilayer woven fabrics with manufacture-induced deformation." Composites Part A: Applied Science and Manufacturing. 77, pp. 266-274. https://doi.org/10.1016/j.compositesa.2015.03.027Dynamic response of orthogonal three-dimensional woven carbon composite beams under soft impact
Turner, P., Liu, T. and Zeng, X.. 2015. "Dynamic response of orthogonal three-dimensional woven carbon composite beams under soft impact." Journal of Applied Mechanics. 82 (12). https://doi.org/10.1115/1.4031455Bond behaviour of composite sandwich panel and epoxy polymer matrix
Ferdous, Wahid, Manalo, Allan and Aravinthan, Thiru. 2016. "Bond behaviour of composite sandwich panel and epoxy polymer matrix." Teng, Jin-Guang and Dai, Jian-Guo (ed.) 8th International Conference on Fibre-Reinforced Polymer (FRP) Composites in Civil Engineering (CICE 2016). Hong Kong, China 14 - 16 Dec 2016 Hong Kong.Transverse permeability of dry fiber preforms manufactured by automated fiber placement
Aziz, A. R., Ali, M. A., Zeng, X., Umer, R., Schubel, P. and Cantwell, W. J.. 2017. "Transverse permeability of dry fiber preforms manufactured by automated fiber placement." Composites Science and Technology. 152, pp. 57-67. https://doi.org/10.1016/j.compscitech.2017.09.011Cost analysis in using non-crimp fabric composites in engineering applications
Schubel, P.. 2011. "Cost analysis in using non-crimp fabric composites in engineering applications." Lomov, Stepan (ed.) Non-crimp fabric composites: manufacturing, properties and applications. United Kingdom. Woodhead Publishing Limited. pp. 494-510Can flax replace E-glass in small wind turbine blades?
Shah, Darshil U. and Schubel, Peter J.. 2013. "Can flax replace E-glass in small wind turbine blades?" JEC Composites Magazine. 50 (78), pp. 34-37.Recent developments and applications of composite railway sleepers
Ferdous, Wahid, Manalo, Allan, Aravinthan, Thiru and Remennikov, Alex. 2016. "Recent developments and applications of composite railway sleepers." Conference on Railway Excellence (CORE) 2016. Melbourne, Australia 16 - 18 May 2016Bond behaviour of composite sandwich panel and epoxy polymer matrix: Taguchi design of experiments and theoretical predictions
Ferdous, Wahid, Manalo, Allan and Aravinthan, Thiru. 2017. "Bond behaviour of composite sandwich panel and epoxy polymer matrix: Taguchi design of experiments and theoretical predictions." Construction and Building Materials. 145, pp. 76-87. https://doi.org/10.1016/j.conbuildmat.2017.03.244Automated geometric modelling of textile structures
Lin, Hua, Zeng, Xuesen, Sherburn, Martin, Long, Andrew C. and Clifford, Mike J.. 2011. "Automated geometric modelling of textile structures." Textile Research Journal. 82 (16), pp. 1689-1702. https://doi.org/10.1177/0040517511418562Effectiveness of formative online quizzes in learning and teaching a structural engineering course
Aravinthan, Thiru, Lokuge, Weena and Manalo, Allan. 2011. "Effectiveness of formative online quizzes in learning and teaching a structural engineering course." Al-Abdeli, Yasir M. and Lindsay, Euan (ed.) 22nd Annual Conference of the Australasian Association for Engineering Education (AAEE 2011). Fremantle, Australia 05 - 07 Dec 2011 Barton, ACT, Australia.Student performance in an online postgraduate course on fibre composites for civil engineers
Aravinthan, Thiru and Manalo, Allan. 2011. "Student performance in an online postgraduate course on fibre composites for civil engineers." Al-Abdeli, Yasir M. and Lindsay, Euan (ed.) 22nd Annual Conference of the Australasian Association for Engineering Education (AAEE 2011). Fremantle, Australia 05 - 07 Dec 2011 Barton, ACT, Australia.Influence of boundary conditions on the ballistic performance of high-strength fabric targets
Zeng, X. S., Shim, V. P. W. and Tan, V. B. C.. 2006. "Influence of boundary conditions on the ballistic performance of high-strength fabric targets ." International Journal of Impact Engineering. 2 (1-4), pp. 631-642. https://doi.org/10.1016/j.ijimpeng.2005.06.011Modelling inter-yarn friction in woven fabric armour
Zeng, X. S., Tan, V. B. C. and Shim, V. P. W.. 2006. "Modelling inter-yarn friction in woven fabric armour." International Journal for Numerical Methods in Biomedical Engineering. 66 (8), pp. 1309-1330. https://doi.org/10.1002/nme.1596Multiscale modeling of polymers – the pseudo amorphous cell
Tan, V. B. C., Zeng, X. S., Deng, M., Lim, K. M. and Tay, T. E.. 2008. "Multiscale modeling of polymers – the pseudo amorphous cell." Computer Methods in Applied Mechanics and Engineering. 197 (6-8), pp. 536-554. https://doi.org/10.1016/j.cma.2007.08.006Multiscale modeling of combined deterministic and stochastic fabric non-uniformity for realistic resin injection simulation
Endruweit, A., Zeng, X. and Long, A. C .. 2014. "Multiscale modeling of combined deterministic and stochastic fabric non-uniformity for realistic resin injection simulation ." Advanced Manufacturing: Polymer & Composites Science. 1 (1), pp. 3-15. https://doi.org/10.1179/2055035914Y.0000000002Stress-strain behaviour of unconfined polymer concrete
Lokuge, Weena and Aravinthan, Thiru. 2014. "Stress-strain behaviour of unconfined polymer concrete." Smith, Scott (ed.) 23rd Australasian Conference on the Mechanics of Structures and Materials (ACMSM23). Byron Bay, Australia 09 - 12 Dec 2014 Byron Bay, Australia.Cure shrinkage in epoxy grouts for grouted repairs
Shamsuddoha, Md, Islam, Md Mainul, Aravinthan, Thiru, Manalo, Allan and Lau, Kin-tak. 2013. "Cure shrinkage in epoxy grouts for grouted repairs." Epaarachchi, Jayantha A., Lau, Alan Kin-tak and Leng, Jinsong (ed.) 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013). Gold Coast, Australia 10 - 12 Jul 2013 United States. https://doi.org/10.1117/12.2028085Advanced geometry modelling for 3D woven fabrics in composites processing and performance analysis
Zeng, Xuesen, Brown, Louise P., Endruweit, Andreas, Matveev, Mikhail and Long, Andrew C.. 2013. "Advanced geometry modelling for 3D woven fabrics in composites processing and performance analysis." JEC Composites Magazine. 50 (82), pp. 55-60.Compressive, tensile and thermal properties of epoxy grouts subjected to underwater conditioning at elevated temperature
Shamsuddoha, M., Islam, M. M., Aravinthan, T., Manalo, A. and Djukic, L. P.. 2014. "Compressive, tensile and thermal properties of epoxy grouts subjected to underwater conditioning at elevated temperature." Smith, Scott T. (ed.) 23rd Australasian Conference on the Mechanics of Structures and Materials (ACMSM23). Byron Bay, Australia 09 - 12 Dec 2014 Lismore, Australia.Large deformation modelling of tight woven fabric under high air pressure
Xiao, Xueliang, Long, Andrew, Lin, Hua and Zeng, Xuesen. 2015. "Large deformation modelling of tight woven fabric under high air pressure." Journal of Engineered Fibers and Fabrics. 10 (1), pp. 63-74.A cost and performance comparison of LRTM and VI for the manufacture of large scale wind turbine blades
Hutchinson, J. R., Schubel, P. J. and Warrior, N. A.. 2011. "A cost and performance comparison of LRTM and VI for the manufacture of large scale wind turbine blades." Renewable Energy. 36 (2), pp. 866-871. https://doi.org/10.1016/j.renene.2010.07.025The experimental determination of prepreg tack and dynamic stiffness
Crossley, R. J., Schubel, P. J. and Warrior, N. A.. 2012. "The experimental determination of prepreg tack and dynamic stiffness." Composites Part A: Applied Science and Manufacturing. 43 (3), pp. 423-434. https://doi.org/10.1016/j.compositesa.2011.10.014Effect of beam orientation on the static behaviour of phenolic core sandwich composites with different shear span-to-depth ratios
Ferdous, Wahid, Manalo, Allan and Aravinthan, Thiru. 2017. "Effect of beam orientation on the static behaviour of phenolic core sandwich composites with different shear span-to-depth ratios." Composite Structures. 168, pp. 292-304. https://doi.org/10.1016/j.compstruct.2017.02.061Cost modelling in polymer composite applications: case study – analysis of existing and automated manufacturing processes for a large wind turbine blade
Schubel, P. J.. 2012. "Cost modelling in polymer composite applications: case study – analysis of existing and automated manufacturing processes for a large wind turbine blade." Composites Part B: Engineering. 43 (3), pp. 953-960. https://doi.org/10.1016/j.compositesb.2011.11.036Hydroxyethylcellulose surface treatment of natural fibres: the new 'twist' in yarn preparation and optimization for composites applicability
Shah, Darshil U., Schubel, Peter J., Licence, Peter and Clifford, Mike J.. 2012. "Hydroxyethylcellulose surface treatment of natural fibres: the new 'twist' in yarn preparation and optimization for composites applicability." Journal of Materials Science. 47 (6), pp. 2700-2711. https://doi.org/10.1007/s10853-011-6096-1Modelling the effect of yarn twist on the tensile strength of unidirectional plant fibre yarn composites
Shah, Darshil U., Schubel, Peter J. and Clifford, Mike J.. 2012. "Modelling the effect of yarn twist on the tensile strength of unidirectional plant fibre yarn composites." Journal of Composite Materials. 47 (4), pp. 425-436. https://doi.org/10.1177/0021998312440737Determining the minimum, critical and maximum fibre content for twisted yarn reinforced plant fibre composites
Shah, Darshil U., Schubel, Peter J., Licence, Peter and Clifford, Mike J.. 2012. "Determining the minimum, critical and maximum fibre content for twisted yarn reinforced plant fibre composites." Composites Science and Technology. 72 (15), pp. 1909-1917. https://doi.org/10.1016/j.compscitech.2012.08.005Fatigue life evaluation of aligned plant fibre composites through S-N curves and constant-life diagrams
Shah, Darshil U., Schubel, Peter J., Clifford, Mike J. and Licence, Peter. 2013. "Fatigue life evaluation of aligned plant fibre composites through S-N curves and constant-life diagrams." Composites Science and Technology. 74, pp. 139-149. https://doi.org/10.1016/j.compscitech.2012.10.015Wind turbine blade design review
Schubel, P. J. and Crossley, R. J.. 2012. "Wind turbine blade design review." Wind Engineering. 36 (4), pp. 365-388. https://doi.org/10.1260/0309-524X.36.4.365Wind turbine blade design
Schubel, P. J. and Crossley, R. J.. 2012. "Wind turbine blade design." Energies. 5 (9), pp. 3425-3449. https://doi.org/10.3390/en5093425Review of structural health and cure monitoring techniques for large wind turbine blades
Schubel, P. J., Crossley, R. J., Boateng, E. K. G. and Hutchinson, J. R.. 2013. "Review of structural health and cure monitoring techniques for large wind turbine blades." Renewable Energy. 51, pp. 113-123. https://doi.org/10.1016/j.renene.2012.08.072Can flax replace E-glass in structural composites? A small wind turbine blade case study
Shah, Darshil U., Schubel, Peter J. and Clifford, Mike J.. 2013. "Can flax replace E-glass in structural composites? A small wind turbine blade case study." Composites Part B: Engineering. 52, pp. 172-181. https://doi.org/10.1016/j.compositesb.2013.04.027Mechanical property characterization of aligned plant yarn reinforced thermoset matrix composites manufactured via vacuum infusion
Shah, Darshil U., Schubel, Peter J., Clifford, Mike J. and Licence, Peter. 2014. "Mechanical property characterization of aligned plant yarn reinforced thermoset matrix composites manufactured via vacuum infusion." Polymer-Plastics Technology and Engineering. 53 (3), pp. 239-253. https://doi.org/10.1080/03602559.2013.843710Experimental determination and control of prepreg tack for automated manufacture
Crossley, R. J., Schubel, P. J. and Warrior, N. A.. 2011. "Experimental determination and control of prepreg tack for automated manufacture." Plastics Rubber and Composites. 40 (6-7), pp. 363-368. https://doi.org/10.1179/174328910X12777566997810The tensile behaviour of off-axis plant fibre composites: an insight on the non-linear stress-strain response
Shah, Darshil U., Schubel, Peter J., Clifford, Mike J. and Licence, Peter. 2012. "The tensile behaviour of off-axis plant fibre composites: an insight on the non-linear stress-strain response." Polymer Composites. 33 (9), pp. 1494-1504. https://doi.org/10.1002/pc.22279Time-temperature equivalence in the tack and dynamic stiffness of polymer prepreg and its application to automated composites manufacturing
Crossley, R. J., Schubel, P. J. and De Focatiis, D. S. A.. 2013. "Time-temperature equivalence in the tack and dynamic stiffness of polymer prepreg and its application to automated composites manufacturing." Composites Part A: Applied Science and Manufacturing. 52, pp. 126-133. https://doi.org/10.1016/j.compositesa.2013.05.002A coupled structural and flow approach for numerical simulation of the light resin transfer moulding process. II: Fabric permeability and compaction characterisation, model results and a 6-kW wind turbine case study
Hutchinson, J. R. and Schubel, P. J.. 2014. "A coupled structural and flow approach for numerical simulation of the light resin transfer moulding process. II: Fabric permeability and compaction characterisation, model results and a 6-kW wind turbine case study." Journal of Reinforced Plastics and Composites. 33 (13), pp. 1237-1257. https://doi.org/10.1177/0731684414527806A coupled structural and flow approach for numerical simulation of the light resin transfer moulding process. I: Model outline
Hutchinson, J. R., Schubel, P. J. and Said, R.. 2014. "A coupled structural and flow approach for numerical simulation of the light resin transfer moulding process. I: Model outline." Journal of Reinforced Plastics and Composites. 33 (14), pp. 1332-1338. https://doi.org/10.1177/0731684414527805Furan matrix and flax fibre as a sustainable renewable composite: mechanical and fire-resistant properties in comparison to phenol, epoxy and polyester
Crossley, Richard, Schubel, Peter and Stevenson, Anthony. 2014. "Furan matrix and flax fibre as a sustainable renewable composite: mechanical and fire-resistant properties in comparison to phenol, epoxy and polyester." Journal of Reinforced Plastics and Composites. 33 (1), pp. 58-68. https://doi.org/10.1177/0731684413502108On recycled carbon fibre composites manufactured through a liquid composite moulding process
Shah, Darshil U. and Schubel, Peter J.. 2016. "On recycled carbon fibre composites manufactured through a liquid composite moulding process." Journal of Reinforced Plastics and Composites. 35 (7), pp. 533-540. https://doi.org/10.1177/0731684415623652Effect of hygrothermal conditioning on the mechanical and thermal properties of epoxy grouts for offshore pipeline rehabilitation
Shamsuddoha, Md, Islam, Md Mainul, Aravinthan, Thiru, Manalo, Allan and Djukic, Luke P.. 2016. "Effect of hygrothermal conditioning on the mechanical and thermal properties of epoxy grouts for offshore pipeline rehabilitation." AIMS Material Science. 3 (3), pp. 832-850. https://doi.org/10.3934/matersci.2016.3.832Understanding the buckling behaviour of steered tows in automated dry fibre placement (ADFP)
Matveev, M. Y., Schubel, P. J., Long, A. C. and Jones, I. A.. 2016. "Understanding the buckling behaviour of steered tows in automated dry fibre placement (ADFP)." Composites Part A: Applied Science and Manufacturing. 90, pp. 451-456. https://doi.org/10.1016/j.compositesa.2016.08.014Green Composite Materials
Wang, Hao, Schubel, Peter, Yi, Xiaosu, Zhu, Jin, Ulven, Chad and Qiu, Yiping. 2015. "Green Composite Materials." Advances in Materials Science and Engineering. 2015. https://doi.org/10.1155/2015/487416Optimal polymer matrix coating for composite railway sleeper – analytic hierarchy process
Ferdous, Wahid, Manalo, Allan, Aravinthan, Thiru and Van Erp, Gerard. 2015. "Optimal polymer matrix coating for composite railway sleeper – analytic hierarchy process." Wu, Zhishen, Wu, Gang and Wang, Xin (ed.) Joint Conference of the 12th International Symposium on Fiber Reinforced Polymers for Reinforced Concrete Structures (FRPRCS-12) & the 5th Asia-Pacific Conference on Fiber Reinforced Polymers in Structures (APFIS-2015). Nanjing, China 14 - 16 Dec 2015 China.Thermo-mechanical behaviour of epoxy based polymer matrix
Ferdous, Wahid, Manalo, Allan, Aravinthan, Thiru and Van Erp, Gerard. 2015. "Thermo-mechanical behaviour of epoxy based polymer matrix." 27th Biennial National Conference of the Concrete Institute of Australia (Concrete 2015) in conjunction with the 69th RILEM Week: Construction Innovations, Research into Practice. Melbourne, Australia 30 Aug - 02 Sep 2015 Sydney, Australia.Effect of ultraviolet radiation on the physical and mechanical properties of polymer matrix
Ferdous, Wahid, Manalo, Allan, Aravinthan, Thiru and Van Erp, Gerard. 2015. "Effect of ultraviolet radiation on the physical and mechanical properties of polymer matrix." 27th Biennial National Conference of the Concrete Institute of Australia (Concrete 2015) in conjunction with the 69th RILEM Week: Construction Innovations, Research into Practice. Melbourne, Australia 30 Aug - 02 Sep 2015 Sydney, Australia.Design of epoxy resin based polymer concrete matrix for composite railway sleeper
Ferdous, Wahid, Manalo, Allan, Aravinthan, Thiru and Van Erp, Gerard. 2014. "Design of epoxy resin based polymer concrete matrix for composite railway sleeper." Smith, Scott T. (ed.) 23rd Australasian Conference on the Mechanics of Structures and Materials (ACMSM23). Byron Bay, Australia 09 - 12 Dec 2014 Lismore, Australia.Properties of epoxy polymer concrete matrix: Effect of resin-to-filler ratio and determination of optimal mix for composite railway sleepers
Ferdous, Wahid, Manalo, Allan, Aravinthan, Thiru and Van Erp, Gerard. 2016. "Properties of epoxy polymer concrete matrix: Effect of resin-to-filler ratio and determination of optimal mix for composite railway sleepers." Construction and Building Materials. 124, pp. 287-300. https://doi.org/10.1016/j.conbuildmat.2016.07.111Composite railway sleepers: new developments and opportunities
Ferdous, Wahid, Aravinthan, Thiru, Manalo, Allan and Van Erp, Gerard. 2015. "Composite railway sleepers: new developments and opportunities." 11th International Heavy Haul Association Conference: Operational Excellence (IHHA 2015). Perth, Australia 21 - 24 Jun 2015 United States.Structural performance of heavy duty composite railway sleeper
Ferdous, Wahid, Manalo, Allan, Aravinthan, Thiru and Van Erp, Gerard. 2015. "Structural performance of heavy duty composite railway sleeper." 11th International Heavy Haul Association Conference: Operational Excellence (IHHA 2015). Perth, Australia 21 - 24 Jun 2015Composite railway sleepers – recent developments, challenges and future prospects
Ferdous, Wahid, Manalo, Allan, Van Erp, Gerard, Aravinthan, Thiru, Kaewunruen, Sakdirat and Remennikov, Alex. 2015. "Composite railway sleepers – recent developments, challenges and future prospects." Composite Structures. 134, pp. 158-168. https://doi.org/10.1016/j.compstruct.2015.08.058Infrastructure failures and consequences: rehabilitation using fibre composites
Aravinthan, Thiru. 2014. "Infrastructure failures and consequences: rehabilitation using fibre composites." Li, Chun Qing, Setunge, Sujeeva and de Silva, Saman (ed.) 1st International Conference on Infrastructure Failures and Consequences (ICIFC 2014). Melbourne, Australia 16 - 20 Jul 2014 Melbourne, Australia.Engineering an education research field for sustainable rural futures: research priorities and outcomes for enhancing agricultural, digital and regional futures
Aravinthan, Thiru and Danaher, P. A.. 2014. "Engineering an education research field for sustainable rural futures: research priorities and outcomes for enhancing agricultural, digital and regional futures." Keppell, Mike and Reushle, Shirley (ed.) 2nd Digital Rural Futures Conference 2014. Toowoomba, Australia 25 - 27 Jun 2014 Toowoomba, Australia.Characterisation of the mechanical properties of pultruded fibre-reinforced polymer tube
Guades, Ernesto, Aravinthan, Thiru and Islam, Md Mainul. 2014. "Characterisation of the mechanical properties of pultruded fibre-reinforced polymer tube." Materials and Design. 63, pp. 305-315. https://doi.org/10.1016/j.matdes.2014.06.018Investigation of full-scale fibre composite girders for replacement of hardwood timber girders in Australia
Aravinthan, Thiru and Kahandawa, Gayan. 2014. "Investigation of full-scale fibre composite girders for replacement of hardwood timber girders in Australia." El-Hacha, Raafat (ed.) 7th International Conference on FRP Composites in Civil Engineering (CICE 2014). Vancouver, Canada 20 - 22 Aug 2014 Calgary, AL. Canada.Processing and characterization of 100% hemp-based biocomposites obtained by vacuum infusion
Francucci, G., Manthey, N. W., Cardona, F. and Aravinthan, T.. 2014. "Processing and characterization of 100% hemp-based biocomposites obtained by vacuum infusion." Journal of Composite Materials. 48 (11), pp. 1323-1335. https://doi.org/10.1177/0021998313485266Review of failures of railway sleepers and its consequences
Ferdous, Wahid, Manalo, Allan, Aravinthan, Thiru and Remennikov, Alex. 2014. "Review of failures of railway sleepers and its consequences." Li, Chun Qing, Setunge, Sujeeva and de Silva, Saman (ed.) 1st International Conference on Infrastructure Failures and Consequences (ICIFC 2014). Melbourne, Australia 16 - 20 Jul 2014 Melbourne, Australia.Composite railway sleeper: a cost effective and eco-friendly alternative
Ferdous, Wahid, Manalo, Allan, Aravinthan, Thiru and Van Erp, Gerard. 2014. "Composite railway sleeper: a cost effective and eco-friendly alternative." IEEE Australia and New Zealand Student and Young Professional Congress (ANZSCON 2014). Brisbane, Australia 03 - 05 Jul 2014Thermo-mechanical properties of epoxidized hemp oil-based bioresins and biocomposites
Manthey, Nathan W., Cardona, Francisco, Francucci, Gaston and Aravinthan, Thiru. 2013. "Thermo-mechanical properties of epoxidized hemp oil-based bioresins and biocomposites." Journal of Reinforced Plastics and Composites. 32 (19), pp. 1444-1456. https://doi.org/10.1177/0731684413493030Effectiveness of using fibre-reinforced polymer composites for underwater steel pipeline repairs
Shamsuddoha, Md, Islam, Md Mainul, Aravinthan, Thiru, Manalo, Allan and Lau, Kin-tak. 2013. "Effectiveness of using fibre-reinforced polymer composites for underwater steel pipeline repairs." Composite Structures. 100, pp. 40-54. https://doi.org/10.1016/j.compstruct.2012.12.019Multi-objective design optimisation of GFRP sandwich beams
Awad, Z. K., Aravinthan, T., Zhuge, Y. and Gonzalez, F.. 2013. "Multi-objective design optimisation of GFRP sandwich beams." Samali, Bijan, Attard, Mario M. and Song, Chongmin (ed.) 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM22). Sydney, Australia 11 - 14 Dec 2012 London, United Kingdom.Mechanical properties of epoxy grouts for structural repair
Shamsuddoha, M., Islam, M. M., Aravinthan, T., Manalo, A. C. and Lau, K. T.. 2013. "Mechanical properties of epoxy grouts for structural repair." Samali, Bijan, Attard, Mario M. and Song, Chongmin (ed.) 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM22). Sydney, Australia 11 - 14 Dec 2012 London, United Kingdom.Properties and behaviour of gomuti fibre composites under tensile and compressive load
Ticoalu, A., Aravinthan, T. and Cardona, F.. 2013. "Properties and behaviour of gomuti fibre composites under tensile and compressive load." Samali, Bijan, Attard, Mario M. and Song, Chongmin (ed.) 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM22). Sydney, Australia 11 - 14 Dec 2012 London, United Kingdom.Effect of coarse filler on shrinkages and dynamic mechanical properties of epoxy grouts
Shamsuddoha, Md, Islam, Md Mainul, Aravinthan, Thiru, Manalo, Allan and Lau, Kin-Tak. 2014. "Effect of coarse filler on shrinkages and dynamic mechanical properties of epoxy grouts." Journal of Multifunctional Composites. 2 (1), pp. 61-66. https://doi.org/10.12783/issn.2168-4286/2.1/Shear behaviour of glued structural fibre composite sandwich beams
Manalo, A. C., Aravinthan, T. and Karunasena, W.. 2013. "Shear behaviour of glued structural fibre composite sandwich beams." Construction and Building Materials. 47, pp. 1317-1327. https://doi.org/10.1016/j.conbuildmat.2013.06.025A study into the characteristics of gomuti (Arenga pinnata) fibre for usage as natural fibre composites
Ticoalu, Adriana, Aravinthan, Thiru and Cardona, Francisco. 2014. "A study into the characteristics of gomuti (Arenga pinnata) fibre for usage as natural fibre composites." Journal of Reinforced Plastics and Composites. 33 (2), pp. 179-192. https://doi.org/10.1177/0731684413503191Characterisation of mechanical and thermal properties of epoxy grouts for composite repair of steel pipelines
Shamsuddoha, Md, Islam, Md Mainul, Aravinthan, Thiru, Manalo, Allan and Lau, Kin-tak. 2013. "Characterisation of mechanical and thermal properties of epoxy grouts for composite repair of steel pipelines." Materials and Design. 52, pp. 315-327. https://doi.org/10.1016/j.matdes.2013.05.068Comparative assessment of polymer concrete with different types of resin
Lokuge, Weena and Aravinthan, Thiru. 2013. "Comparative assessment of polymer concrete with different types of resin." Dao, Vinh and Dux, Peter (ed.) Concrete Institute of Australia's Biennial National Conference (Concrete 2013): Understanding Concrete. Gold Coast, Australia 16 - 18 Oct 2013 Sydney, Australia.Geometry and restraint effects on the bending behaviour of the glass fibre reinforced polymer sandwich slabs under point load
Awad, Ziad K., Aravinthan, Thiru, Zhuge, Yan and Manalo, Allan. 2013. "Geometry and restraint effects on the bending behaviour of the glass fibre reinforced polymer sandwich slabs under point load." Materials and Design. 45, pp. 125-134. https://doi.org/10.1016/j.matdes.2012.08.072Damage modelling of repeatedly impacted square fibre reinforced polymer composite tube
Guades, Ernesto, Aravinthan, Thiru, Manalo, Allan and Islam, Mainul. 2013. "Damage modelling of repeatedly impacted square fibre reinforced polymer composite tube." Materials and Design. 47, pp. 687-697. https://doi.org/10.1016/j.matdes.2012.12.051Fibre composites for high pressure pipeline repairs, in-air and subsea: an overview
Shamsuddoha, Md, Islam, Md Mainul, Aravinthan, Thiru, Manalo, Allan, Lau, Kin-tak and Elder, David. 2012. "Fibre composites for high pressure pipeline repairs, in-air and subsea: an overview." Ueda, Tamon (ed.) 3rd Asia-Pacific Conference on FRP in Structures (APFIS 2012). Sapporo, Japan 02 - 04 Feb 2012 Hokkaido, Japan.Behaviour of pultruded FRP hollow sections under eccentric loading
Islam, Md Mainul, Aravinthan, Thiru and Williams, Paul Garreth. 2012. "Behaviour of pultruded FRP hollow sections under eccentric loading." Monti, Georgio (ed.) 6th International Conference on FRP Composites in Civil Engineering (CICE 2012). Rome, Italy 13 - 15 Jun 2012 Rome, Italy.Effect of fly ash on the behaviour of polymer concrete with different types of resin
Lokuge, Weena and Aravinthan, Thiru. 2013. "Effect of fly ash on the behaviour of polymer concrete with different types of resin." Materials and Design. 51, pp. 175-181. https://doi.org/10.1016/j.matdes.2013.03.078Mechanical behaviour of a new type of fibre composite railway sleeper
Manalo, Allan C. and Aravinthan, Thiru. 2012. "Mechanical behaviour of a new type of fibre composite railway sleeper." Ueda, Tamon (ed.) 3rd Asia-Pacific Conference on FRP in Structures (APFIS 2012). Sapporo, Japan 02 - 04 Feb 2012 Hokkaido, Japan.Field applications and case studies of FRP in civil infrastructure: the Australian experience
Aravinthan, Thiru and Manalo, Allan. 2012. "Field applications and case studies of FRP in civil infrastructure: the Australian experience." Monti, Georgio (ed.) 6th International Conference on FRP Composites in Civil Engineering (CICE 2012). Rome, Italy 13 - 15 Jun 2012 Winnipeg, Manitoba, Canada.Prediction of the flexural behavior of fibre composite sandwich beams
Manalo, Allan C., Aravinthan, Thiru and Karunasena, Karu. 2012. "Prediction of the flexural behavior of fibre composite sandwich beams." Ueda, Tamon (ed.) 3rd Asia-Pacific Conference on FRP in Structures (APFIS 2012). Sapporo, Japan 02 - 04 Feb 2012 Hokkaido, Japan.Peer assisted learning in an online postgraduate course on engineered fibre composites
Manalo, Allan and Aravinthan, Thiru. 2012. "Peer assisted learning in an online postgraduate course on engineered fibre composites." Mann, Llewellyn and Daniel, Scott (ed.) 23rd Annual Conference of the Australasian Association for Engineering Education (AAEE 2012). Melbourne, Australia 03 - 05 Dec 2012 Melbourne, Australia.Compressive properties of chemically-treated hemp fibre reinforced composites
Kabir, Mohammad Mazedul, Wang, Hao, Lau, Alan, Cardona, Francisco and Aravinthan, Thiru. 2012. "Compressive properties of chemically-treated hemp fibre reinforced composites." Heslehurst, Rikard Benton and Byrne, Ann (ed.) Composites Australia and the CRC for Advanced Composite Structures Conference 2012: Diversity in Composites. Leura, Australia 15 - 16 Mar 2012 Melbourne, Australia.Stiffness of FRP pultruded tubes under repeated axial impacts
Guades, Ernesto J., Aravinthan, Thiru, Islam, Md. Mainul and Manalo, Allan C.. 2012. "Stiffness of FRP pultruded tubes under repeated axial impacts." Ueda, Tamon (ed.) 3rd Asia-Pacific Conference on FRP in Structures (APFIS 2012). Sapporo, Japan 02 - 04 Feb 2012 Hokkaido, Japan.Green building materials: hemp oil based biocomposites
Manthey, Nathan W., Cardona, Francisco, Francucci, Gaston M. and Aravinthan, Thiru. 2012. "Green building materials: hemp oil based biocomposites." 2012 World Academy of Science, Engineering and Technology Conference (WASET 2012). Bali, Indonesia 24 - 25 Oct 2012 Canakkale, Turkey.Behaviour of full-scale railway turnout sleepers from glue-laminated fibre composite sandwich structures
Manalo, Allan and Aravinthan, Thiru. 2012. "Behaviour of full-scale railway turnout sleepers from glue-laminated fibre composite sandwich structures." Journal of Composites for Construction. 16 (6), pp. 724-736. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000307Research and development of fibre composites in civil infrastructure - the Australian experience [Keynote address]
Aravinthan, Thiru. 2012. "Research and development of fibre composites in civil infrastructure - the Australian experience [Keynote address]." Ueda, Tamon (ed.) 3rd Asia-Pacific Conference on FRP in Structures (APFIS 2012). Sapporo, Japan 02 - 04 Feb 2012 Hokkaido, Japan.Composites in civil infrastructure: R & D to applications
Aravinthan, T.. 2012. "Composites in civil infrastructure: R & D to applications." Bai, Yu, Bandyopadhyay, Sri, Zhao, Ling, Singh, Raman and Rizkalla, Sami (ed.) 6th International Composites Conference (ACUN 6): Composites and Nanocomposites in Civil, Offshore and Mining Infrastructure. Melbourne, Australia 14 - 16 Nov 2012 Melbourne, Australia.Effects of energy level and impact repetitions on the impact fatigue behaviour and post-impact flexural properties of square FRP pultruded tubes
Guades, E. J., Aravinthan, T., Manalo, A. C. and Islam, M. M.. 2013. "Effects of energy level and impact repetitions on the impact fatigue behaviour and post-impact flexural properties of square FRP pultruded tubes." Samali, Bijan, Attard, Mario M. and Song, Chongmin (ed.) 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM22). Sydney, Australia 11 - 14 Dec 2012 London, United Kingdom.Residual properties of square FRP composite tubes subjected to repeated axial impact
Guades, Ernesto and Aravinthan, Thiru. 2013. "Residual properties of square FRP composite tubes subjected to repeated axial impact." Composite Structures. 95, pp. 354-365. https://doi.org/10.1016/j.compstruct.2012.08.041Investigation of the free vibration behaviour of an innovative GFRP sandwich floor panel
Awad, Ziad K., Aravinthan, Thiru and Zhuge, Yan. 2012. "Investigation of the free vibration behaviour of an innovative GFRP sandwich floor panel." Construction and Building Materials. 37, pp. 209-219. https://doi.org/10.1016/j.conbuildmat.2012.07.039Analysis of a railway turnout system with a spot replacement sleeper
Manalo, A. C., Aravinthan, T. and Karunasena, W.. 2013. "Analysis of a railway turnout system with a spot replacement sleeper." Samali, Bijan, Attard, Mario M. and Song, Chongmin (ed.) 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM22). Sydney, Australia 11 - 14 Dec 2012 London, United Kingdom.Composite behaviour of a hybrid FRP bridge girder and concrete deck
Manalo, A. C., Aravinthan, T., Mutsuyoshi, H. and Matsui, T.. 2012. "Composite behaviour of a hybrid FRP bridge girder and concrete deck." Advances in Structural Engineering: an international journal. 15 (4), pp. 589-600. https://doi.org/10.1260/1369-4332.15.4.589Cure kinetic study of epoxidized hemp oil cured with a multiple catalytic system
Manthey, Nathan W., Cardona, Francisco and Aravinthan, Thiru. 2012. "Cure kinetic study of epoxidized hemp oil cured with a multiple catalytic system." Journal of Applied Polymer Science. 125 (S2), pp. E511-E517. https://doi.org/10.1002/app.35561Mechanical properties characterization of the skin and core of a novel composite sandwich structure
Manalo, A. C., Aravinthan, T. and Karunasena, W.. 2013. "Mechanical properties characterization of the skin and core of a novel composite sandwich structure." Journal of Composite Materials. 47 (14), pp. 1785-1800. https://doi.org/10.1177/0021998312451607Experimental investigation on the behaviour of square FRP composite tubes under repeated axial impact
Guades, Ernesto, Aravinthan, Thiru, Manalo, Allan and Islam, Mainul. 2013. "Experimental investigation on the behaviour of square FRP composite tubes under repeated axial impact." Composite Structures. 97, pp. 211-221. https://doi.org/10.1016/j.compstruct.2012.10.033Application of wavelet parameters for impact damage detection in plates
Shelley, T. J. and Liew, C. K.. 2013. "Application of wavelet parameters for impact damage detection in plates." Key Engineering Materials. 558, pp. 12-24. https://doi.org/10.4028/www.scientific.net/KEM.558.12A review on the characteristics of gomuti fibre and its composites with thermoset resins
Ticoalu, Adriana, Aravinthan, Thiru and Cardona, Francisco. 2013. "A review on the characteristics of gomuti fibre and its composites with thermoset resins." Journal of Reinforced Plastics and Composites. 32 (2), pp. 124-136. https://doi.org/10.1177/0731684412463109A review on the driving performance of FRP composite piles
Guades, Ernesto, Aravinthan, Thiru, Islam, Mainul and Manalo, Allan. 2012. "A review on the driving performance of FRP composite piles." Composite Structures. 94 (6), pp. 1932-1942. https://doi.org/10.1016/j.compstruct.2012.02.004Behaviour of glued fibre composite sandwich structure in flexure: experiment and fibre model analysis
Manalo, Allan and Aravinthan, Thiru. 2012. "Behaviour of glued fibre composite sandwich structure in flexure: experiment and fibre model analysis." Materials and Design. 39, pp. 458-468. https://doi.org/10.1016/j.matdes.2012.02.052Geometry effect on the behaviour of single and glue-laminated glass fibre reinforced polymer composite sandwich beams loaded in four-point bending
Awad, Ziad K., Aravinthan, Thiru and Manalo, Allan. 2012. "Geometry effect on the behaviour of single and glue-laminated glass fibre reinforced polymer composite sandwich beams loaded in four-point bending." Materials and Design. 39 (5), pp. 93-103. https://doi.org/10.1016/j.matdes.2012.02.023Innovative all composite multi-pultrusion truss systems: FE modelling and behavioural issues
Omar, T., Van Erp, G., Aravinthan, T. and Key, P.. 2007. "Innovative all composite multi-pultrusion truss systems: FE modelling and behavioural issues." Smith, Scott T. (ed.) 1st Asia-Pacific Conference on FRP in Structures (APFIS 2007). Hong Kong, China 12 - 14 Dec 2007 Hong Kong.Mechanical properties of chemically-treated hemp fibre reinforced sandwich composites
Kabir, M. M., Wang, H., Lau, K. T., Cardona, F. and Aravinthan, T.. 2012. "Mechanical properties of chemically-treated hemp fibre reinforced sandwich composites." Composites Part B: Engineering. 43 (2), pp. 159-169. https://doi.org/10.1016/j.compositesb.2011.06.003Compressive strength characterization of polyester based fillers
Sirimanna, Chamila Sampath, Lokuge, Weena, Islam, Md Mainul and Aravinthan, Thiru. 2012. "Compressive strength characterization of polyester based fillers." Advanced Materials Research. https://doi.org/10.4028/www.scientific.net/AMR.410.32The effects of fibre wraps on the flexural behaviour of glulam composite sandwich beams
Manalo, A. C. and Aravinthan, T.. 2011. "The effects of fibre wraps on the flexural behaviour of glulam composite sandwich beams." Cowled, Craig J. L. (ed.) 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing (eddBE 2011). Brisbane, Australia 27 - 29 Apr 2011 Brisbane, Australia.Experimental investigation of HFRP composite beams
Mutsuyoshi, Hiroshi, Hai, Nguyen Duc, Shiroki, Kensuke, Aravinthan, Thiru and Manalo, Allan. 2011. "Experimental investigation of HFRP composite beams." Seracino, Rudi and Sen, Rajan (ed.) 10th International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures (FRPRCS-10). Tampa, United States 02 - 04 Apr 2011 Farmington Hills, MI. United States.Natural fibre composites with QLD based fibres and vegetable oils
Manthey, N. W., Cardona, F., Aravinthan, T., Wang, H. and Cooney, T.. 2011. "Natural fibre composites with QLD based fibres and vegetable oils." Fragomeni, Sam, Venkatesan, Srikanth, Lam, Nelson T. K. and Setunge, Sujeeva (ed.) 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM 21). Melbourne, Australia 07 - 10 Dec 2010 Leiden, Netherlands.Driveability of composite piles
Guades, E. J., Aravinthan, T. and Islam, M. M.. 2011. "Driveability of composite piles." Cowled, Craig J. L. (ed.) 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing (eddBE 2011). Brisbane, Australia 27 - 29 Apr 2011 Brisbane, Australia.Effects of fly ash source and curing procedure on strength development of geopolymers
Zhang, Z., Wang, H., Reid, A. and Aravinthan, T.. 2011. "Effects of fly ash source and curing procedure on strength development of geopolymers." Fragomeni, Sam, Venkatesan, Srikanth, Lam, Nelson and Setunge, Sujeeva (ed.) 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM 21). Melbourne, Australia 07 - 10 Dec 2010 London, United Kingdom.Effect of chemical treatment on the mechanical and thermal properties of hemp fibre reinforced thermoset sandwich composites
Kabir, M. M., Wang, H., Cardona, F. and Aravinthan, T.. 2011. "Effect of chemical treatment on the mechanical and thermal properties of hemp fibre reinforced thermoset sandwich composites." Fragomeni, Sam, Venkatesan, Srikanth, Lam, Nelson T. K. and Setunge, Sujeeva (ed.) 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM 21). Melbourne, Australia 07 - 10 Dec 2010 Leiden, Netherlands. https://doi.org/10.1201/b10571-78Experimental and numerical analysis of an innovative GFRP sandwich floor panel under point load
Awad, Ziad K., Aravinthan, Thiru and Zhuge, Yan. 2012. "Experimental and numerical analysis of an innovative GFRP sandwich floor panel under point load." Engineering Structures. 41, pp. 126-135. https://doi.org/10.1016/j.engstruct.2012.03.023A comparison of the shear behaviour of a fibre composite sandwich structure in the transverse and in-plane directions
Manalo, A. C., Aravinthan, T. and Karunasena, W.. 2011. "A comparison of the shear behaviour of a fibre composite sandwich structure in the transverse and in-plane directions." Fragomeni, Sam and Venkatesan, Srikanth (ed.) 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM 21). Melbourne, Australia 07 - 10 Dec 2010 Leiden, Netherlands. https://doi.org/10.1201/b10571-75Innovative strengthening technique using post-tensioned fibre composite wraps for bridge headstocks
Aravinthan, T. and Heldt, T.. 2010. "Innovative strengthening technique using post-tensioned fibre composite wraps for bridge headstocks." Australian Journal of Structural Engineering. 11 (2), pp. 117-128.The effect of modulus of elasticity on the behaviour of railway turnout sleepers
Manalo, A. C., Aravinthan, T., Karunasena, W. and Stevens, N.. 2011. "The effect of modulus of elasticity on the behaviour of railway turnout sleepers." Fragomeni, Sam, Venkatesan, Srikanth, Lam, Nelson T. K. and Setunge, Sujeeva (ed.) 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM 21). Melbourne, Australia 07 - 10 Dec 2010 Leiden, Netherlands. https://doi.org/10.1201/b10571-76Behaviour of fibre composite pile under axial compression load
Guades, E. J., Sirimanna, C. S., Aravinthan, T. and Islam, M. M.. 2011. "Behaviour of fibre composite pile under axial compression load." Venkatesan, Srikanth, Lam, Nelson T. K. and Setunge, Sujeeva (ed.) 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM 21). Melbourne, Australia 07 - 10 Dec 2010 Leiden, Netherlands. https://doi.org/10.1201/b10571-81Preliminary development of polymer based filler materials for GFRP tubular connector
Sirimanna, C. S., Islam, M. M. and Aravinthan, T.. 2011. "Preliminary development of polymer based filler materials for GFRP tubular connector." Fragomeni, Sam, Venkatesan, Srikanth, Lam, Nelson T. K. and Setunge, Sujeeva (ed.) 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM 21). Melbourne, Australia 07 - 10 Dec 2010 Leiden, Netherlands. https://doi.org/10.1201/b10571-79Behaviour of fibre composite sandwich panels under uniformly distributed loading
Islam, M. M. and Aravinthan, T.. 2011. "Behaviour of fibre composite sandwich panels under uniformly distributed loading." Fragomeni, Sam, Venkatesan, Srikanth, Lam, Nelson T. K. and Setunge, Sujeeva (ed.) 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM 21). Melbourne, Australia 07 - 10 Dec 2010 Leiden, Netherlands. https://doi.org/10.1201/b10571-77Experimental investigation into gomuti fibres/polyester composites
Ticoalu, A., Aravinthan, T. and Cardona, F.. 2011. "Experimental investigation into gomuti fibres/polyester composites." Fragomeni, Sam, Venkatesan, Srikanth, Lam, Nelson T. K. and Setunge, Sujeeva (ed.) 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM 21). Melbourne, Australia 07 - 10 Dec 2010 Leiden, Netherlands. https://doi.org/10.1201/b10571-80Multi-objective design optimization of an innovative fibre composite sandwich panel for civil engineering applications
Awad, Z. K., Aravinthan, T., Zhuge, Y. and Gonzalez, F.. 2011. "Multi-objective design optimization of an innovative fibre composite sandwich panel for civil engineering applications." Fragomeni, Sam, Venkatesan, Srikanth, Lam, Nelson T. K. and Setunge, Sujeeva (ed.) 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM 21). Melbourne, Australia 07 - 10 Dec 2010 Leiden, Netherlands. https://doi.org/10.1201/b10571-145Flexural behaviour of glulam beams from novel sandwich panels
Manalo, Allan C. and Aravinthan, Thiru. 2011. "Flexural behaviour of glulam beams from novel sandwich panels." Ferreira, A. J. M. (ed.) 16th International Conference on Composite Structures (ICCS 16). Porto, Portugal 28 - 30 Jul 2011 Porto, Portugal.Analysis of a typical railway turnout sleeper system using grillage beam analogy
Manalo, Allan, Aravinthan, Thiru, Karunasena, Warna and Stevens, Nick. 2012. "Analysis of a typical railway turnout sleeper system using grillage beam analogy." Finite Elements in Analysis and Design. 48 (1), pp. 1376-1391. https://doi.org/10.1016/j.finel.2011.08.007Influence of fly ash proportions on properties of polymer concrete with polyester resin
Lokuge, Weena, Aravinthan, Thiru, Sirimanna, Chamila Sampath and Islam, Mainul. 2011. "Influence of fly ash proportions on properties of polymer concrete with polyester resin." 25th Biennial Conference of the Concrete Institute of Australia (Concrete 2011): Building a Sustainable Future. Perth, Australia 12 - 14 Oct 2011 Sydney, Australia.Synthesis of phenolic bio-resins for advanced composites in civil engineering structures
Cardona, Francisco, Aravinthan, Thiru, Fedrigo, Jessica and Moscou, Clarisse. 2010. "Synthesis of phenolic bio-resins for advanced composites in civil engineering structures." Goh, Steven C. and Wang, Hao (ed.) 2010 Southern Region Engineering Conference (SREC 2010). Toowoomba, Australia 11 - 12 Nov 2010 Toowoomba, Australia.Preface to futures in mechanics of structures and materials conference. ACMSM20
Aravinthan, Thiru, Karunasena, Warna (Karu) and Wang, Hao. 2009. "Preface to futures in mechanics of structures and materials conference. ACMSM20." Aravinthan, Thiru, Karunasena, Warna (Karu) and Wang, Hao (ed.) 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM20). Toowoomba, Australia 02 - 05 Dec 2008 London, United Kingdom.Fibre composite windmill structure - investigations and design considerations
Omar, T. and Aravinthan, T.. 2008. "Fibre composite windmill structure - investigations and design considerations." Aravinthan, Thiru, Karunasena, Warna (Karu) and Wang, Hao (ed.) 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM20). Toowoomba, Australia 02 - 05 Dec 2008 London, United Kingdom.An investigation on the stiffness of timber sleepers for the design of fibre composite sleepers
Ticoalu, A., Aravinthan, T. and Karunasena, W.. 2008. "An investigation on the stiffness of timber sleepers for the design of fibre composite sleepers." Aravinthan, Thiru, Karunasena, Warna (Karu) and Wang, Hao (ed.) 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM20). Toowoomba, Australia 02 - 05 Dec 2008 London, United Kingdom.Dynamic behavior of hybrid composite bridge girder
Epaarachchi, J. A., Karunasena, W. and Aravinthan, T.. 2008. "Dynamic behavior of hybrid composite bridge girder." Aravinthan, Thiru, Karunasena, Warna (Karu) and Wang, Hao (ed.) 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM20). Toowoomba, Australia 02 - 05 Dec 2008 London, United Kingdom.Overview of external post-tensioning in bridges
Suntharavadivel, Thuraichamy Guganesan and Aravinthan, Thiru. 2005. "Overview of external post-tensioning in bridges." Thorpe, David, Yadav, Umapati, Snook, Chris and Liang, George (ed.) 2005 Southern Region Engineering Conference (SREC 2005). Toowoomba, Australia 15 Oct 2005 Toowoomba, Australia.Torsional resistance of high-strength concrete beams
Hossain, T., Mendis, P. A., Aravinthan, Thiru and Baker, Graham. 2006. "Torsional resistance of high-strength concrete beams." Moss, Peter J. and Dhakal, Rajesh P. (ed.) 19th Australasian Conference on the Mechanics of Structures and Materials (ACMSM19). Christchurch, New Zealand 29 Nov - 01 Dec 2006 London, UK.Shear strengthening of cracked RC beam using external post-tensioning
Suntharavadivel, Thuraichamy Guganesan, Aravinthan, Thiru and Luther, Stephen. 2006. "Shear strengthening of cracked RC beam using external post-tensioning." Moss, Peter J. and Dhakal, Rajesh P. (ed.) 19th Australasian Conference on the Mechanics of Structures and Materials (ACMSM19). Christchurch, New Zealand 29 Nov - 01 Dec 2006 London, UK.The development of a simulation engineering game to teach problem solving skills and team dynamics
Pather, Selvan and Aravinthan, Thiru. 2006. "The development of a simulation engineering game to teach problem solving skills and team dynamics." Doyle, Susan and Mannis, Adam (ed.) Engineering Education 2006 (EE2006). Liverpool, United Kingdom 24 - 26 Jul 2006 Liverpool, UK.Effective use of WebCT in a problem-based learning course for a dual mode delivery
Aravinthan, Thiru and Worden, John. 2006. "Effective use of WebCT in a problem-based learning course for a dual mode delivery." Doyle, Susan and Mannis, Adam (ed.) Engineering Education 2006 (EE2006). Liverpool, United Kingdom 24 - 26 Jul 2006 United Kingdom.A strengthening system: international patent for innovative structural strengthening using externally prestressed fibre wraps
Aravinthan, Thiru, Heldt, Tim and Van Erp, Gerard. 2007. A strengthening system: international patent for innovative structural strengthening using externally prestressed fibre wraps. PCT/AU2005/0011581A review of optimization techniques used in the design of fibre composite structures for civil engineering applications
Awad, Ziad K., Aravinthan, Thiru, Zhuge, Yan and Gonzalez, Felipe. 2012. "A review of optimization techniques used in the design of fibre composite structures for civil engineering applications." Materials and Design. 33 (1), pp. 534-544. https://doi.org/10.1016/j.matdes.2011.04.061Fibre composite sandwich beam: an alternative to railway turnout sleeper?
Manalo, Allan, Aravinthan, Thiru, Karunasena, Warna and Douglas, Steven. 2010. "Fibre composite sandwich beam: an alternative to railway turnout sleeper?" Goh, Steven C. and Wang, Hao (ed.) 2010 Southern Region Engineering Conference (SREC 2010). Toowoomba, Australia 11 - 12 Nov 2010 Toowoomba, Australia.The developments of structural health/integrity monitoring systems using FBG sensors at CEEFC of USQ
Kahandawa, Gayan C., Epaarachchi, Jayantha A., Wang, Hao and Aravinthan, Thiru. 2010. "The developments of structural health/integrity monitoring systems using FBG sensors at CEEFC of USQ." Goh, Steven C. and Wang, Hao (ed.) 2010 Southern Region Engineering Conference (SREC 2010). Toowoomba, Australia 11 - 12 Nov 2010 Toowoomba, Australia.Mechanical properties of epoxidized hemp oil based biocomposites: preliminary results
Manthey, N. W., Cardona, F. and Aravinthan, T.. 2011. "Mechanical properties of epoxidized hemp oil based biocomposites: preliminary results." Cowled, Craig J. L. (ed.) 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing (eddBE 2011). Brisbane, Australia 27 - 29 Apr 2011 Brisbane, Australia.Temperature effects on full scale FRP bridge using innovative composite components
Sirimanna, C. S., Islam, M. M. and Aravinthan, T.. 2011. "Temperature effects on full scale FRP bridge using innovative composite components." Ye, Lieping, Feng, Peng and Yue, Qingrui (ed.) 5th International Conference on FRP Composites in Civil Engineering (CICE 2010). Beijing, China 27 - 29 Sep 2010 Beijing, China.Cure kinetics of an epoxidized hemp oil based bioresin system
Manthey, Nathan W., Cardona, Francisco, Aravinthan, Thiru and Cooney, Tyson. 2011. "Cure kinetics of an epoxidized hemp oil based bioresin system." Journal of Applied Polymer Science. 122 (1), pp. 444-451. https://doi.org/10.1002/app.34086Incorporating a variety of assessment tools in a web-based postgraduate course developed for practicing engineers
Aravinthan, Thiru. 2010. "Incorporating a variety of assessment tools in a web-based postgraduate course developed for practicing engineers." Gardner, Anne and Jolly, Lesley (ed.) 21st Annual Conference for the Australasian Association of Engineering Education (AAEE 2010). Sydney, Australia 05 - 08 Dec 2010 Sydney, Australia.A review of current development in natural fiber composites for structural and infrastructure applications
Ticoalu, A., Aravinthan, T. and Cardona, F.. 2010. "A review of current development in natural fiber composites for structural and infrastructure applications." Goh, Steven C. and Wang, Hao (ed.) 2010 Southern Region Engineering Conference (SREC 2010). Toowoomba, Australia 11 - 12 Nov 2010 Toowoomba, Australia.Effects of natural fibre surface on composite properties: a review
Kabir, M. M., Wang, H., Aravinthan, T., Cardona, F. and Lau, K. -T.. 2011. "Effects of natural fibre surface on composite properties: a review." Cowled, Craig J. L. (ed.) 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing (eddBE 2011). Brisbane, Australia 27 - 29 Apr 2011 Brisbane, Australia.Behaviour of structural fibre composite sandwich panels under point load and uniformly distributed load
Islam, Md Mainul and Aravinthan, Thiru. 2010. "Behaviour of structural fibre composite sandwich panels under point load and uniformly distributed load." Composite Structures. 93 (1), pp. 206-215. https://doi.org/10.1016/j.compstruct.2010.05.019Polymer based filler materials as infill for GFRP pile connector
Sirimanna, Chamila Sampath, Islam, Md Mainul and Aravinthan, Thiru. 2011. "Polymer based filler materials as infill for GFRP pile connector." Key Engineering Materials. 471-472, pp. 763-768. https://doi.org/10.4028/www.scientific.net/KEM.471-472.763Flexural behaviour of structural fibre composite sandwich beams in flatwise and edgewise positions
Manalo, A. C., Aravinthan, T., Karunasena, W. and Islam, M. M.. 2010. "Flexural behaviour of structural fibre composite sandwich beams in flatwise and edgewise positions." Composite Structures. 92 (4), pp. 984-995. https://doi.org/10.1016/j.compstruct.2009.09.046Development of a fibre composite turnout sleeper
Aravinthan, Thiru, Manalo, Allan and Douglas, Steve. 2010. "Development of a fibre composite turnout sleeper." Uy, Brian and Xiang, Yang (ed.) 5th Civil Engineering Conference in the Asian Region and Australasian Structural Engineering Conference (CECAR5 and ASEC2010): Innovative Community Building. Sydney, Australia 08 - 12 Aug 2010 Sydney, Australia.In-plane shear behaviour of fibre composite sandwich beams using asymmetrical beam shear test
Manalo, A. C., Aravinthan, T. and Karunasena, W.. 2010. "In-plane shear behaviour of fibre composite sandwich beams using asymmetrical beam shear test." Construction and Building Materials. 24 (10), pp. 1952-1960. https://doi.org/10.1016/j.conbuildmat.2010.04.005Shear behavior of glue-laminated composite sandwich beams
Manalo, Allan C., Aravinthan, Thiru and Karunasena, Warna. 2010. "Shear behavior of glue-laminated composite sandwich beams." Ye, Lieping, Feng, Peng and Yue, Qingrui (ed.) 5th International Conference on FRP Composites in Civil Engineering (CICE 2010). Beijing, China 27 - 29 Sep 2010 Beijing, China.Evaluation of the strength and stiffness of glue-laminated fibre composite sandwich panels for structural beam application
Manalo, Allan C., Aravinthan, Thiru and Karunasena, Warna. 2010. "Evaluation of the strength and stiffness of glue-laminated fibre composite sandwich panels for structural beam application." Teh, Kian, Davies, Ian and Howard, Ian (ed.) 6th Australasian Congress on Applied Mechanics (ACAM 6). Perth, Western Australia 12 - 15 Dec 2010 Perth, Australia.Behaviour of structural glulam beams from sustainable fibre composite sandwich panels
Manalo, Allan, Aravinthan, Thiru and Karunasena, Warna. 2010. "Behaviour of structural glulam beams from sustainable fibre composite sandwich panels." Uy, Brian and Xiang, Yang (ed.) 5th Civil Engineering Conference in the Asian Region and Australasian Structural Engineering Conference (CECAR5 and ASEC2010): Innovative Community Building. Sydney, Australia 08 - 12 Aug 2010 Sydney, Australia.Effects of temperature on a pultruded FRP composite
Sirimanna, Chamila S., Islam, Md Mainul and Aravinthan, Thiru. 2010. "Effects of temperature on a pultruded FRP composite." Teh, Kian, Davies, Ian and Howard, Ian (ed.) 6th Australasian Congress on Applied Mechanics (ACAM 6). Perth, Western Australia 12 - 15 Dec 2010 Perth, Australia.Natural fibre composites with epoxidized vegetable oil (EVO) resins: a review
Manthey, N. W., Cardona, F., Aravinthan, T., Wang, H. and Cooney, T.. 2010. "Natural fibre composites with epoxidized vegetable oil (EVO) resins: a review." Goh, Steven C. and Wang, Hao (ed.) 2010 Southern Region Engineering Conference (SREC 2010). Toowoomba, Australia 11 - 12 Nov 2010 Toowoomba, Australia.Modified PF resins for composite structures with improved mechanical properties
Cardona, F., Aravinthan, T. and Moscou, C.. 2010. "Modified PF resins for composite structures with improved mechanical properties." Polymers and Polymer Composites. 18 (6), pp. 297-306.An overview on the application of FRP composites in piling system
Guades, E. J., Aravinthan, T. and Islam, M. M.. 2010. "An overview on the application of FRP composites in piling system." Goh, Steven C. and Wang, Hao (ed.) 2010 Southern Region Engineering Conference (SREC 2010). Toowoomba, Australia 11 - 12 Nov 2010 Canberra, Australia.Challenges in the design and delivery of an online postgraduate course in fibre composites
Aravinthan, Thiru. 2010. "Challenges in the design and delivery of an online postgraduate course in fibre composites." Ye, Lieping, Feng, Peng and Yue, Qingrui (ed.) 5th International Conference on FRP Composites in Civil Engineering (CICE 2010). Beijing, China 27 - 29 Sep 2010 Beijing, China.Investigation of frequency characteristics of GFRP/phenolic sandwich beams
Awad, Ziad K., Aravinthan, Thiru, Zhuge, Yan and Gonzalez, Felipe. 2010. "Investigation of frequency characteristics of GFRP/phenolic sandwich beams." Goh, Steven C. and Wang, Hao (ed.) 2010 Southern Region Engineering Conference (SREC 2010). Toowoomba, Australia 11 - 12 Nov 2010 Toowoomba, Australia.Flexural behaviour of glue-laminated fibre composite sandwich beams
Manalo, A. C., Aravinthan, T. and Karunasena, W.. 2010. "Flexural behaviour of glue-laminated fibre composite sandwich beams." Composite Structures. 92 (11), pp. 2703-2711. https://doi.org/10.1016/j.compstruct.2010.03.006Cost optimum design of structural fibre composite sandwich panel for flooring applications
Awad, Ziad K., Aravinthan, Thiru and Zhuge, Yan. 2011. "Cost optimum design of structural fibre composite sandwich panel for flooring applications." Ye, Lieping, Feng, Peng and Yue, Qingrui (ed.) 5th International Conference on FRP Composites in Civil Engineering (CICE 2010). Beijing, China 27 - 29 Sep 2010 Beijing, China.Effectiveness of self-assessment quizzes as a learning tool
Aravinthan, Vasantha and Aravinthan, Thiru. 2010. "Effectiveness of self-assessment quizzes as a learning tool." Engineering Education Conference (EE 2010): Inspiring the Next Generation of Engineers . Birmingham, United Kingdom 06 - 08 Jul 2010 Birmingham, UK.Behaviour of hybrid FRP composite I-girder with concrete deck
Manalo, Allan, Mutsuyoshi, Hiroshi, Aravinthan, Thiru and Matsui, Takahiro. 2009. "Behaviour of hybrid FRP composite I-girder with concrete deck." Oehlers, Deric, Griffith, Michael and Seracino, Rudolf (ed.) 9th International Symposium of the Fiber Reinforced Polymer Reinforcement for Reinforced Concrete Structures (FRPRCS-9): Current Challenges and Future Trends. Sydney, Australia 13 - 15 Jul 2009 Adelaide, Australia.Advanced robust design optimization of FRP sandwich floor panels
Awad, Z. K., Gonzalez, F. and Aravinthan, T.. 2010. "Advanced robust design optimization of FRP sandwich floor panels." IOP Conference Series: Materials Science and Engineering. 10 (1), pp. 1-9. https://doi.org/10.1088/1757-899X/10/1/012182Behaviour of innovative fibre composite sandwich panels under point loading
Islam, M. M., Aravinthan, T. and Van Erp, G.. 2009. "Behaviour of innovative fibre composite sandwich panels under point loading." Sim, Jongsung (ed.) 2nd Asia-Pacific Conference on FRP in Structures (APFIS 2009). Seoul, Korea 09 - 11 Dec 2009 Seoul, Korea.Design and development of a fibre composite windmill structure
Omar, T. and Aravinthan, T.. 2009. "Design and development of a fibre composite windmill structure." Australian Journal of Structural Engineering. 10 (1), pp. 25-36.Flexural behaviour of laminated fibre composite sandwich beams
Manalo, A. C., Aravinthan, T. and Karunasena, W.. 2009. "Flexural behaviour of laminated fibre composite sandwich beams." Sim, Jongsung (ed.) 2nd Asia-Pacific Conference on FRP in Structures (APFIS 2009). Seoul, Korea 09 - 11 Dec 2009 Seoul, Korea.Design and development of a fibre composite wind mill structure
Omar, Tarek and Aravinthan, Thiru. 2008. "Design and development of a fibre composite wind mill structure." Gad, Emad and Wong, Bill (ed.) Australasian Structural Engineering Conference 2008: Engaging with Structural Engineering. Melbourne, Australia 26 - 27 Jun 2008 Melbourne, Victoria.Application of external post-tensioning for strengthening of headstocks (bent-caps) in bridges
Aravinthan, Thiru, Sabonchy, Erdal and Heldt, Tim. 2004. "Application of external post-tensioning for strengthening of headstocks (bent-caps) in bridges." Oh, B. H. (ed.) CONSEC'04: Environment and Loading. Seoul, Korea 27 - 30 Jun 2004 Seoul, South Korea.Finite element analysis of fibre composite sandwich panel
Awad, Ziad K., Aravinthan, Thiru and Zhuge, Yan. 2009. "Finite element analysis of fibre composite sandwich panel." Thorpe, David, Zhuge, Yan and Rogers-Clark, Peter (ed.) 2009 Southern Region Engineering Conference (SREC 2009). Springfield, Australia 17 - 18 Oct 2009 Brisbane, Australia.Vibration of debonded laminated fibre composite sandwich beams
Karunasena, W., Aravinthan, T. and Manalo, A. C.. 2009. "Vibration of debonded laminated fibre composite sandwich beams." Sim, Jongsung (ed.) 2nd Asia-Pacific Conference on FRP in Structures (APFIS 2009). Seoul, Korea 09 - 11 Dec 2009 Seoul, Korea.Flexural behaviour of composite sandwiches for structural applications
Manalo, Allan, Aravinthan, Thiru, Karunasena, Warna and Islam, Mainul. 2009. "Flexural behaviour of composite sandwiches for structural applications." Oehlers, D. J., Griffith, M. C. and Seracino, R. (ed.) 9th International Symposium on Fibre Reinforced Polymers for Reinforced Concrete Structures (FRPRCS-9): Current Challenges and Future Trends. Sydney, Australia 13 - 15 Jul 2009 Adelaide, Australia.Automated Finite Element Modelling of 3D Woven Textiles
Zeng, X. S., Long, A. C., Clifford, M. J., Iniotakis, C., Probst-Schendzielorz, S. and Schmitt, M. W.. 2010. "Automated Finite Element Modelling of 3D Woven Textiles." 3rd World Conference on 3D Fabrics and their Applications. 20 - 21 Apr 2011CFD Flow Simulation for Impregnation of 3D Woven Reinforcements
Zeng, X., Endruweit, A., Long, A. C. and Clifford, M. J.. 2010. "CFD Flow Simulation for Impregnation of 3D Woven Reinforcements." International Conference on Textile Composites (TEXCOMP). United States. IOP Publishing.A review of alternative materials for replacing existing timber sleepers
Manalo, A., Aravinthan, T., Karunasena, W. and Ticoalu, A.. 2010. "A review of alternative materials for replacing existing timber sleepers." Composite Structures. 92 (3), pp. 603-611. https://doi.org/10.1016/j.compstruct.2009.08.046Mechanical behavior of hybrid FRP composites with bolted joints
Manalo, A. C., Mutsuyoshi, H., Asamoto, S., Aravinthan, T. and Matsui, T.. 2008. "Mechanical behavior of hybrid FRP composites with bolted joints." Aravinthan, Thiru, Karunasena, Warna (Karu) and Wang, Hao (ed.) 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM20). Toowoomba, Australia 02 - 05 Dec 2008 London, United Kingdom.AFRP retrofitting of RC structures in Japan
Shinozaki, H., Pandey, G. R., Mutsuyoshi, H. and Aravinthan, T.. 2008. "AFRP retrofitting of RC structures in Japan." Aravinthan, Thiru, Karunasena, Warna (Karu) and Wang, Hao (ed.) 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM20). Toowoomba, Australia 02 - 05 Dec 2008 London, United Kingdom.Fibre composite windmill structure - challenges in the design and development
Aravinthan, T. and Omar, T.. 2008. "Fibre composite windmill structure - challenges in the design and development." Motavalli, Masoud (ed.) 4th International Conference on FRP Composites in Civil Engineering (CICE 2008). Zurich, Switzerland 22 - 24 Jul 2008 Zurich, Switzerland.Futures in mechanics of structures and materials: proceedings of the 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM20), Toowoomba, Australia, 2-5 December 2008
Aravinthan, Thiru, Karunasena, Warna (Karu) and Wang, Hao. Aravinthan, Thiru, Karunasena, Warna (Karu) and Wang, Hao (ed.) 2009. Futures in mechanics of structures and materials: proceedings of the 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM20), Toowoomba, Australia, 2-5 December 2008. London, United Kingdom. CRC Press.Investigation of dynamic behaviour of a hybrid composite bridge girder
Epaarachchi, Jayantha A., Karunasena, Warna and Aravinthan, Thiru. 2007. "Investigation of dynamic behaviour of a hybrid composite bridge girder." Marshall, Ian (ed.) 14th International Conference on Composite Structures (ICCS 14). Melbourne, Australia 19 - 21 Nov 2007 Melbourne, Australia.M2S2 modular deployable shelter system: concept and analysis technique
Omar, T., Van Erp, G., Aravinthan, T. and Key, P.. 2008. "M2S2 modular deployable shelter system: concept and analysis technique." Xie, Yi Min and Patnaikuni, Indubhushan (ed.) ISEC 4: Innovations in Structural Engineering and Construction. Melbourne, Australia 26 - 28 Sep 2007 Leiden, Netherlands.Experimental investigation of innovative hybrid composite girders with GFRP and CFRP
Asamoto, S., Mutsuyoshi, H., Aravinthan, T. and Suzukawa, K.. 2008. "Experimental investigation of innovative hybrid composite girders with GFRP and CFRP." Xie, Mike and Patnaikuni, Indubhushan (ed.) ISEC 4: Innovations in Structural Engineering and Construction. Melbourne, Australia 26 - 28 Sep 2007 Leiden, Netherlands.Advancements in retrofitting reinforced concrete structures in Japan using FRP sheets
Shinozaki, Hiroo, Aravinthan, Thiru, Pandey, Govinda Raj and Mutsuyoshi, Hiroshi. 2007. "Advancements in retrofitting reinforced concrete structures in Japan using FRP sheets." 23rd Biennial Conference of the Concrete Institute of Australia: Concrete for Future. Adelaide, Australia 18 - 20 Oct 2007 Adelaide, Australia.Flexural behavior of hybrid FRP girder with concrete deck
Mutsuyoshi, H., Aravinthan, T., Asamoto, S., Manalo, A. C. and Suzukawa, K.. 2007. "Flexural behavior of hybrid FRP girder with concrete deck." Smith, Scott T. (ed.) 1st Asia-Pacific Conference on FRP in Structures (APFIS 2007). Hong Kong, China 12 - 14 Dec 2007 Hong Kong.Retrofitting reinforced concrete bridge frames using externally bonded FRP sheets
Pandey, G. R., Mutsuyoshi, H. and Aravinthan, T.. 2007. "Retrofitting reinforced concrete bridge frames using externally bonded FRP sheets." Smith, Scott T. (ed.) 1st Asia-Pacific Conference on FRP in Structures (APFIS 2007). Hong Kong, China 12 - 14 Dec 2007 Hong Kong.The effect of core architecture on the behaviour of sandwich columns under edgewise compression loading
Omar, T., Aravinthan, T. and Van Erp, G.. 2007. "The effect of core architecture on the behaviour of sandwich columns under edgewise compression loading." Smith, Scott T. (ed.) 1st Asia-Pacific Conference on FRP in Structures (APFIS 2007). Hong Kong, China 12 - 14 Dec 2007 Hong Kong.Analytical studies on externally post tensioned concrete girders with existing shear cracks
Suntharavadivel, Thuraichamy Guganesan and Aravinthan, Thiru. 2007. "Analytical studies on externally post tensioned concrete girders with existing shear cracks." 23rd Biennial Conference of the Concrete Institute of Australia: Concrete for Future. Adelaide, Australia 18 - 20 Oct 2007 Adelaide, Australia.Strengthening of shear damaged RC beams with external clamping
Suntharavadivel, T. G. and Aravinthan, T.. 2008. "Strengthening of shear damaged RC beams with external clamping." Xie, Yi Min and Patnaikuni, Indubhushan (ed.) ISEC 4: Innovations in Structural Engineering and Construction. Melbourne, Australia 26 - 28 Sep 2007 Leiden, Netherlands.Flexural behavior of two-span continuous prestressed concrete girders with highly eccentric external tendors
Aravinthan, Thiru, Witchukreangkrai, Eakarat and Mutsuyoshi, Hiroshi. 2005. "Flexural behavior of two-span continuous prestressed concrete girders with highly eccentric external tendors." ACI Structural Journal. 102 (3), pp. 402-411.Innovative strengthening technique using prestressed fibre wraps for bridge headstocks
Aravinthan, T. and Heldt, T.. 2005. "Innovative strengthening technique using prestressed fibre wraps for bridge headstocks." Stewart, Mark G. and Dockrill, Brad (ed.) 2005 Australian Structural Engineering Conference (ASEC 2005). Newcastle, Australia 11 - 14 Sep 2005 Sydney, Australia.Characterizing and constitutive modelling of aramid fibres at high strain rates
Tan, V. B. C., Zeng, X. S. and Shim, V. P. W.. 2008. "Characterizing and constitutive modelling of aramid fibres at high strain rates ." International Journal of Impact Engineering. 35 (11), pp. 1303-1313. https://doi.org/10.1016/j.ijimpeng.2007.07.010Innovative all composite multi-pultrusion truss system for stressed arch deployable shelters
Omar, T., Van Erp, G., Aravinthan, T. and Key, P.. 2007. "Innovative all composite multi-pultrusion truss system for stressed arch deployable shelters." Rabboo, Fathi Abd and Fathelbab, Fahmy (ed.) AICSGE 6: 6th Alexandria International Conference on Structural and Geotechnical Engineering. Alexandria, Egypt 15 - 17 Apr 2007 Alexandria, Egypt.An overview of prestressed concrete technology in Australia
Aravinthan, Thiru. 2004. "An overview of prestressed concrete technology in Australia." Journal of Prestressed Concrete. 46 (1), pp. 34-41.Assessing individual student performance in a team-based engineering problem solving course
Aravinthan, Thiru, Fahey, Paul and Worden, John. 2005. "Assessing individual student performance in a team-based engineering problem solving course." Radcliffe, David and Humphries, Josh (ed.) 4th ASEE/AaeE Global Colloquium on Engineering Education. Sydney, Australia 26 - 29 Sep 2005 Brisbane, Australia.Effects of existing shear damage on externally post tensioned repair of bent caps
Aravinthan, Thiru and Suntharavadivel, T. G.. 2007. "Effects of existing shear damage on externally post tensioned repair of bent caps." Journal of Structural Engineering. 133 (11), pp. 1662-1669. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:11(1662)Re-skilling staff for PBL teaching in a team context
Brodie, Lyn, Aravinthan, Thiru, Worden, John and Porter, Mark. 2006. "Re-skilling staff for PBL teaching in a team context." Doyle, Susan and Mannis, Adam (ed.) Engineering Education 2006 (EE2006). Liverpool, United Kingdom 24 - 26 Jul 2006 Liverpool, United Kingdom.Is external post-tensioning an effective solution for shear strengthening of bridge elements?
Aravinthan, Thiru. 2006. "Is external post-tensioning an effective solution for shear strengthening of bridge elements?" Forde, M. C. (ed.) Structural Faults + Repair 2006: Eleventh International Conference on ‘Extending the Life of Bridges Concrete + Composites Buildings, Masonry + Civil Structures'. Edinburgh, United Kingdom 13 - 15 Jun 2006 Edinburgh, UK.Effect of existing cracks in concrete bridge members strengthened by external post-tensioning
Suntharavadivel, Thuraichamy Guganesan and Aravinthan, Thiru. 2006. "Effect of existing cracks in concrete bridge members strengthened by external post-tensioning." FIB 2006: 2nd Congress (Federation Internationale du Beton). Naples, Italy 05 - 08 Jun 2006 Naples, Italy.Strengthening of bridge headstocks with external post-tensioning: design issues and strengthening techniques
Aravinthan, Thiru and Heldt, Tim. 2005. "Strengthening of bridge headstocks with external post-tensioning: design issues and strengthening techniques." Road System and Engineering Technology Forum (2005). Brisbane, Australia 09 - 11 Aug 2005 Brisbane, Australia.Modelling crimp in woven fabrics subjected to ballistic impact
Tan, V. B. C., Shim, V. P. W. and Zeng, X.. 2005. "Modelling crimp in woven fabrics subjected to ballistic impact." International Journal of Impact Engineering. 32 (1-4), pp. 561-574. https://doi.org/10.1016/j.ijimpeng.2005.06.008This item comprises data from the following sources: Web of Science